Nanostar and Nanonetwork Crystals Fabricated by in Situ Nanoparticlization of Fully Conjugated Polythiophene Diblock Copolymers

Degradable Block Copolymer Nanoparticles Synthesized by Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) combines polymerization and in situ self-assembly of block copolymers in one system and has become a widely used method to prepare block copolymer nanoparticles at high concentrations. The persistence of polymers in the environment poses a huge threat to the ecosystem and represents a significant waste of resources. There is an urgent need to develop novel chemical approaches to synthesize degradable polymers. To meet with this demand, it is crucial to install degradability into PISA nanoparticles. Most recently, degradable PISA nanoparticles have been synthesized by introducing degradation mechanisms into either shell-forming or core-forming blocks. This Minireview summarizes the development in degradable block copolymer nanoparticles synthesized by PISA, including shell-degradable, core-degradable, and all-degradable nanoparticles. Future development will benefit from expansion of polymerization techniques with new degradation mechanisms and adaptation of high-throughput approaches for both PISA syntheses and degradation studies.

Semi-conductive micellar networks of all-conjugated diblock and triblock copolymer blends

The crystallization-driven self-assembly of the blends of the all-conjugated block copolymers of poly(3-hexylthiophene) (P3HT) and poly(3-ethylhexylthiophene) (P3EHT) results in the cross-linking of the one-dimensional nanowires of P3HT-b-P3EHT, which is achieved by intercalating P3HT-b-P3EHT-b-P3HT into the nanowire cores. The micellar networks constitute flexible and porous materials that conduct electricity upon doping.

Morphological transition and transformation of 2D nanosheets by controlling the balance of ππ stacking interaction and crystalline driving forces

Nanoscale organic two-dimensional (2D) materials of block polymers (BCPs) have attracted interest on account of their wide potential applications in a range of fields. Herein, we design a new poly(p-phenylenevinylene) (PPV) based BCP that contains a triisopropylsilyl side chain and poly (2-vinyl pyridine) (P2VP) corona, which could assemble into a series of 2D square and rectangular micelles in isopropanol. The aspect ratios and the scales of the 2D micelles can be tuned in two ways, including altering the ratios of the P2VP and PPV-TIPS blocks and their concentrations. By precisely controlling the aspect ratios, micro-scale rod-like micelles are also obtained. From in depth studies of the morphology transition from rectangular micelles to rod-like or square micelles, it is found that the BCPs initially organize into fibers and then assemble into final micelles by the combined forces of π-π interactions and the crystalline force from TIPS side chains. Based on the balance of the two interactions, 2D circle-like micelles are also achieved by heterogenous co-assembly of two kinds of polymers with different cores.

RAFT-mediated polymerization-induced self-assembly (RAFT-PISA): current status and future directions

Polymerization-induced self-assembly (PISA) combines polymerization and self-assembly in a single step with distinct efficiency that has set it apart from the conventional solution self-assembly processes. PISA holds great promise for large-scale production, not only because of its efficient process for producing nano/micro-particles with high solid content, but also thanks to the facile control over the particle size and morphology. Since its invention, many research groups around the world have developed new and creative approaches to broaden the scope of PISA initiations, morphologies and applications, etc. The growing interest in PISA is certainly reflected in the increasing number of publications over the past few years, and in this review, we aim to summarize these recent advances in the emerging aspects of RAFT-mediated PISA. These include (1) non-thermal initiation processes, such as photo-, enzyme-, redox- and ultrasound-initiation; the achievements of (2) high-order structures, (3) hybrid materials and (4) stimuli-responsive nano-objects by design and adopting new monomers and new processes; (5) the efforts in the realization of upscale production by utilization of high throughput technologies, and finally the (6) applications of current PISA nano-objects in different fields and (7) its future directions.

Self-Assembly of Copolymers Containing Crystallizable Blocks: Strategies and Applications

The self-assembly of copolymers containing crystallizable block in solution has received increasing attentions in the past few years. Various strategies including crystallization-driven self-assembly (CDSA) and polymerization-induced CDSA (PI-CDSA) have been widely developed. Abundant self-assembly morphologies were captured and advanced applications have been attempted. In this review, the synthetic strategies including the mechanisms and characteristics are highlighted, the survey on the advanced applications of crystalline nano-assemblies are collected. This review is hoped to depict a comprehensive outline for self-assembly of copolymers containing crystallizable block in recent years and to prompt the development of the self-assembly technology in interdisciplinary field. This article is protected by copyright. All rights reserved.

Synchronous Preparation of Length-Controllable 1D Nanoparticles via Crystallization-Driven In Situ Nanoparticlization of Conjugated Polymers

Precise size control of semiconducting nanomaterials from polymers is crucial for optoelectronic applications, but the low solubility of conjugated polymers makes this challenging. Herein, we prepared length-controlled semiconducting one-dimensional (1D) nanoparticles by synchronous self-assembly during polymerization. First, we succeeded in unprecedented living polymerization of highly soluble conjugated poly(3,4-dihexylthiophene). Then, block copolymerization of poly(3,4-dihexylthiophene)-block-polythiophene spontaneously produced narrow-dispersed 1D nanoparticles with lengths from 15 to 282 nm according to the size of a crystalline polythiophene core. The key factors for high efficiency and length control are a highly solubilizing shell and slow polymerization of the core, thereby favoring nucleation elongation over isodesmic growth. Combining kinetics and high-resolution imaging analyses, we propose a unique mechanism called crystallization-driven in situ nanoparticlization of conjugated polymers (CD-INCP) where spontaneous nucleation creates seeds, followed by seeded growth in units of micelles. Also, we achieved "living" CD-INCP through a chain-extension experiment. We further simplified CD-INCP by adding both monomers together in one-shot copolymerization but still producing length-controlled nanoparticles.

Reduction-Induced Crystallization-Driven Self-Assembly of Main-Chain-Type Alternating Copolymers: Transformation from 1D Lines to 2D Platelets

In recent years, crystalline-driven self-assembly (CDSA) has received enormous attention, but almost only for block copolymers (BCPs). Herein, we introduced perfluorocarbon chains into main-chain-type liquid crystalline alternating copolymers (ACPs) to obtain perfluoroalkane-containing ACPs with periodic C-I bonds in polymer backbones via step transfer-addition and radical-termination (START) polymerization, followed by an iodine reduction reaction of C-I bonds to induce CDSA of ACPs and put forward a novel concept of "reduction-induced crystallization-driven self-assembly" (RI-CDSA) of main-chain-type ACPs for the first time. Finally, we proposed the folded-chain model and mechanism to explain the novel RI-CDSA behavior, and its rationality has been proved by the corresponding experimental results.

Efficient Access to 3D Mesoscopic Prisms in Polymeric Soft Materials

The preparation of 3D functional isolated mesoscopic assemblies remains a challenge in the self-assembly of polymers. Here, well-defined 3D hexagonal and hexagram prisms with uniform dimensions are acquired by the crystallization of the inclusion complex composed of a crystalline molecule tris-o-phenylenedioxycyclotriphosphazene (TPP) and a block copolymer. The crystalline TPP plays an important role in the self-assembling process. The faceted morphologies of the hexagonal and hexagram prisms are infrequent in the self-assembly field of soft materials. The formation of the prisms experiences a 3D growth mechanism. The epitaxial growth, accompanied by the heterogeneous nucleation in the edges, yields the growth of inclusion crystals. This study provides a path to construct well-defined polymeric soft materials with broad utility based on numerous supramolecular complexes.

Emerging applications for living crystallization-driven self-assembly

The use of crystallization as a tool to control the self-assembly of polymeric and molecular amphiphiles in solution is attracting growing attention for the creation of non-spherical nanoparticles and more complex, hierarchical assemblies. In particular, the seeded growth method termed living crystallization-driven self-assembly (CDSA) has been established as an ambient temperature and potentially scalable platform for the preparation of low dispersity samples of core-shell fiber-like or platelet micellar nanoparticles. Significantly, this method permits predictable control of size, and access to branched and segmented structures where functionality is spatially-defined. Living CDSA operates under kinetic control and shows many analogies with living chain-growth polymerizations of molecular organic monomers that afford well-defined covalent polymers of controlled length except that it covers a much longer length scale (ca. 20 nm to 10 μm). The method has been applied to a rapidly expanding range of crystallizable polymeric amphiphiles, which includes block copolymers and charge-capped homopolymers, to form assemblies with crystalline cores and solvated coronas. Living CDSA seeded growth methods have also been transposed to a wide variety of π-stacking and hydrogen-bonding molecular species that form supramolecular polymers in processes termed "living supramolecular polymerizations". In this article we outline the main features of the living CDSA method and then survey the promising emerging applications for the resulting nanoparticles in fields such as nanomedicine, colloid stabilization, catalysis, optoelectronics, information storage, and surface functionalization.

Ionic polyacetylene with a unique nanostructure and high stability by metathesis cyclopolymerization-induced self-assembly

Conjugated ionic polyacetylene was synthesized by metathesis cyclopolymerization, and self-assembled into various nanostructures, which exhibited high thermal and oxidative stability.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

Rapid formation and real-time observation of micron-sized conjugated nanofibers with tunable lengths and widths in 20 minutes by living crystallization-driven self-assembly

Preparing well-defined semiconducting nanostructures from conjugated polymers is of paramount interest for organic optoelectronic devices. Several studies have demonstrated excellent structural and size control from block copolymers (BCPs) containing non-conjugated blocks via crystallization-driven self-assembly (CDSA); however, the precise control of their size and shape remains a challenge due to their poor solubility, causing rapid and uncontrolled aggregation. This study presents a new type of fully conjugated BCP comprising two polyacetylene derivatives termed poly(cyclopentenylene-vinylene) to prepare semiconducting 1D nanofibers. Interestingly, the widths of nanofibers were tuned from 12 to 32 nm based on the contour lengths of their crystalline core blocks. Their lengths could also be controlled from 48 nm to 4.7 μm using the living CDSA. Monitoring of the growth kinetics of the living CDSA revealed the formation of micron-sized 1D nanofibers in less than 20 min. The rapid CDSA enabled us to watch real-time growth using confocal fluorescence microscopy.

New fully conjugated block copolymers formed semiconducting 1D nanofibers with excellent structural and size control. The rapid living CDSA enabled us to watch the real-time video of the whole self-assembly process.

Rod-coil block copolymer aggregates via polymerization-induced self-assembly

Polymerization-induced self-assembly (PISA), incorporating the polymerization with in situ self-assembly, can achieve nano-objects efficiently. However, the cooperative polymerization and self-assembly lead to unclear polymerization kinetics and aggregation behavior, especially for the systems forming rigid chains. Here, we used dissipative particle dynamics simulations with a probability-based reaction model to explore the PISA behavior of rod-coil block copolymer systems. The impact of the length of macromolecular initiators, the targeted length of rigid chains, and the reaction probability on the PISA behavior, including polymerization kinetics and self-assembly, were examined. The difference between PISA and traditional self-assembly was revealed. A comparison with experimental observations shows that the simulation can capture the essential feature of the PISA. The present work provides a comprehensive understanding of rod-coil PISA systems and may provide meaningful information for future experimental research.

Manipulation and Deposition of Complex, Functional Block Copolymer Nanostructures Using Optical Tweezers

Block copolymer self-assembly has enabled the creation of a range of solution-phase nanostructures with applications from optoelectronics and biomedicine to catalysis. However, to incorporate such materials into devices a method that facilitates their precise manipulation and deposition is desirable. Herein we describe how optical tweezers can be used to trap, manipulate, and pattern individual cylindrical micelles and larger hybrid micellar materials. Through the combination of TIRF imaging and optical trapping we can precisely control the three-dimensional motion of individual cylindrical block copolymer micelles in solution, enabling the creation of customizable arrays. We also demonstrate that dynamic holographic assembly enables the creation of ordered customizable arrays of complex hybrid block copolymer structures. By creating a program which automatically identifies, traps, and then deposits multiple assemblies simultaneously we have been able to dramatically speed up this normally slow process, enabling the fabrication of arrays of hybrid structures containing hundreds of assemblies in minutes rather than hours.

Synthesis of Functional Polyacetylenes via Cyclopolymerization of Diyne Monomers with Grubbs-type Catalysts

Metathesis cyclopolymerization (CP) of α,ω-diynes is a powerful method to prepare functional polyacetylenes (PAs). PAs have long been studied due to their interesting electrical, optical, photonic, and magnetic properties which make them candidates for use in various advanced applications. Grubbs catalysts are widely used throughout synthetic chemistry, largely due to their accessibility, high reactivity, and tolerance to air, moisture, and many functional groups. Prior to our entrance into this field, only a few examples of CP using modified Grubbs catalysts existed. Inspired by these works, we saw an opportunity to expand the accessibility and utility of Grubbs-catalyzed CPs. We began by exploring CP with popular and commercially available Grubbs catalysts. We found Grubbs third-generation catalyst (G3) to be an excellent catalyst when we used strategies to stabilize the propagating Ru carbene, such as decreasing the polymerization temperature or using weakly coordinating solvent or ligands. Controlled living polymerizations were demonstrated using various 1,6-heptadiyne monomers and yielded polymers with exclusively 5-membered rings (via α-addition) in the polymer backbone. The strategy of stabilizing the Ru carbene was also critical to successful CP with Hoveyda-Grubbs second-generation (HG2) and Grubbs first-generation (G1) catalysts. We found that decomposed Ru species were catalyzing side reactions which could be completely shut down by decreasing the reaction temperature or using weakly coordinating ligands. While HG2 generally led to uncontrolled polymerizations, we found it to be an effective catalyst for monomers with very large side chains. G1 displayed broader functional group tolerance and thus broader monomer scope than G3. We next looked at our ability to change the regioselectivity of the polymerization by using Z-selective catalysts which favor β-addition and the formation of 6-membered rings in the polymer backbone. While modest β-selectivity could be obtained using Grubbs Z-selective catalyst at low temperatures, we found that by using one of Hoveyda and co-workers' catalysts with decreased carbene electrophilicity, we could achieve exclusive formation of 6-membered rings. We also pursued alternative routes to achieve 6+-membered rings in the polymer backbone by using diyne monomers with increased distance between alkynes. We found that optimizing the monomer structure for CP was an effective strategy to achieve controlled polymerizations. By using bulky substituents (maximizing the Thorpe-Ingold effect) and/or using heteroatoms (shorter bonds) to bring the alkynes closer together, controlled living CP could be achieved with various 1,7-octadiyne and 1,8-nonadiyne monomers. Finally, we took advantage of several inherent properties of controlled CP techniques to prepare polymers with advanced architectures and nanostructures. For instance, the living nature of the polymerization enabled production of block copolymers, the tolerance of very large substituents enabled production of dendronized and brush polymers, and the insolubility or crystallinity of some monomers was utilized for the spontaneous self-assembly of polymers into various one- and two-dimensional nanostructures. Overall, the strategies of stabilizing the propagating Ru carbene, modulating the selectivity and reactivity of the Ru carbene, and enhancing the inherent reactivity of monomers were key to improving the utility and performance of CP with Grubbs-type catalysts. The insight provided by these studies will be important for future developments of CP and other metathesis polymerizations utilizing ring-closing steps.

Scalable Fiber-like Micelles and Block Co-micelles by Polymerization-Induced Crystallization-Driven Self-Assembly

Self-assembled 1D block copolymer nanoparticles (micelles) are of interest for a range of applications. However, morphologically pure samples are often challenging to access, and precise dimensional control is not possible. Moreover, the development of synthetic protocols that operate on a commercially viable scale has been a major challenge. Herein, we describe the preparation 1D fiber-like micelles with crystalline cores at high concentrations by a one-pot process termed polymerization-induced crystallization-driven self-assembly (PI-CDSA). We also demonstrate the formation of uniform fibers by living PI-CDSA, a process in which block copolymer synthesis, self-assembly, and seeded growth are combined. We have demonstrated that the method is successful for block copolymers that possess the same composition as that of the seed (homoepitaxial growth) and also where the coronal chemistries differ to give segmented 1D fibers known as block co-micelles. We have also shown that heteroepitaxial growth allows the formation of scaled-up block co-micelles where the composition of both the core and corona was varied. These proof-of-concept experiments indicate that PI-CDSA is a promising, scalable route to a variety of polydisperse or uniform 1D nanoparticles based on block copolymers with different crystalline core chemistries and, therefore, functions.

Probing the Growth Kinetics for the Formation of Uniform 1D Block Copolymer Nanoparticles by Living Crystallization-Driven Self-Assembly

Living crystallization-driven self-assembly (CDSA) is a seeded growth method for crystallizable block copolymers (BCPs) and related amphiphiles in solution and has recently emerged as a highly promising and versatile route to uniform core-shell nanoparticles (micelles) with control of dimensions and architecture. However, the factors that influence the rate of nanoparticle growth have not been systematically studied. Using transmission electron microscopy, small- and wide-angle X-ray scattering, and super-resolution fluorescence microscopy techniques, we have investigated the kinetics of the seeded growth of poly(ferrocenyldimethylsilane)- b-(polydimethylsiloxane) (PFS- b-PDMS), as a model living CDSA system for those employing, for example, crystallizable emissive and biocompatible polymers. By altering various self-assembly parameters including concentration, temperature, solvent, and BCP composition our results have established that the time taken to prepare fiber-like micelles via the living CDSA method can be reduced by decreasing temperature, by employing solvents that are poorer for the crystallizable PFS core-forming block, and by increasing the length of the PFS core-forming block. These results are of general importance for the future optimization of a wide variety of living CDSA systems. Our studies also demonstrate that the growth kinetics for living CDSA do not exhibit the first-order dependence of growth rate on unimer concentration anticipated by analogy with living covalent polymerizations of molecular monomers. This difference may be caused by the combined influence of chain conformational effects of the BCP on addition to the seed termini and chain length dispersity.

New Insights into RAFT Dispersion Polymerization-Induced Self-Assembly: From Monomer Library, Morphological Control, and Stability to Driving Forces

Polymerization-induced self-assembly (PISA) has been established as an efficient, robust, and versatile approach to synthesize various block copolymer nano-objects with controlled morphologies, tunable dimensions, and diverse functions. The relatively high concentration and potential scalability makes it a promising technique for industrial production and practical applications of functional polymeric nanoparticles. This feature article outlines recent advances in PISA via reversible addition-fragmentation chain transfer dispersion polymerization. Considerable efforts to understand morphological control, broaden the monomer library, enhance morphological stability, and incorporate multiple driving forces in PISA syntheses are summarized herein. Finally, perspectives on the future of PISA research are discussed.

Uniform two-dimensional square assemblies from conjugated block copolymers driven by π-π interactions with controllable sizes

Two-dimensional (2-D) micro- and nano-architectures are attractive because of their unique properties. However, the formation of 2-D supramolecular highly symmetrical structures with considerable control is still a major challenge. Here we present a simple approach for the preparation of regular and homogeneous 2-D fluorescent square non-crystallization micelles with conjugated diblock copolymers PPV₁₂-b-P2VP_n through a process of dissolving–cooling–aging. The scale of the formed micelles can be controlled by the ratio of PPV/P2VP blocks and the concentration of the solution. The results reveal that the micelles of PPV₁₂-b-P2VP_n initially form 1-D structures and then grow into 2-D structures in solution, and the growth is driven by intermolecular π–π interactions with the PPV₁₂ blocks. The formation of 2-D square micelles is induced by herringbone arrangement of the molecules, which is closely related to the presence of the branched alkyl chains attached to conjugated PPV₁₂ cores.

Crystallization-driven processes play a vital role in preparing 2D nanostructures which makes structures with high symmetry hard to access. Here the authors present a non-crystallization approach which is based on π–π interactions of a copolymer for the fabrication of 2D symmetric structures with good dimensional control.

Synthesis of Structurally Defined Cationic Polythiophenes for DNA Binding and Gene Delivery

Water-soluble conjugated polymers (WCPs) have prospective applications in the field of bioimaging, disease diagnosis, and therapy. However, the use of WCPs with controllability and regioregularity for bioapplications have scarcely been reported. In this work, we synthesized polythiophenes containing ester side chains (P3ET) via Kumada catalyst-transfer polycondensation (KCTP) and confirmed a quasi-"living" chain-growth mechanism. In addition, we obtained cationic regioregular polythiophenes (cPTs) by aminolysis of P3ET with varied chain lengths, and studied DNA binding capability and gene delivery performance. Benefiting from photocontrolled generation of intracellular reactive oxygen species (ROS), the cationic polythiophenes successfully delivered DNA into tumor cells without additional polymer species.

Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA): New Insights and Opportunities

The polymerization-induced self-assembly (PISA) process is a useful synthetic tool for the efficient synthesis of polymeric nanoparticles of different morphologies. Recently, studies on visible light initiated PISA processes have offered a number of key research opportunities that are not readily accessible using traditional thermally initiated systems. For example, visible light mediated PISA (Photo-PISA) enables a high degree of control over the dispersion polymerization process by manipulation of the wavelength and intensity of incident light. In some cases, the final nanoparticle morphology of a single formulation can be modulated by simple manipulation of these externally controlled parameters. In addition, temporal (and in principle spatial) control over the Photo-PISA process can be achieved in most cases. Exploitation of the mild room temperature polymerizations conditions can enable the encapsulation of thermally sensitive therapeutics to occur without compromising the polymerization rate and their activities. Finally, the Photo-PISA process can enable further mechanistic insights into the morphological evolution of nanoparticle formation such as the effects of temperature on the self-assembly process. The purpose of this mini-review is therefore to examine some of these recent advances that have been made in Photo-PISA processes, particularly in light of the specific advantages that may exist in comparison with conventional thermally initiated systems.

Complex and Hierarchical 2D Assemblies via Crystallization-Driven Self-Assembly of Poly(l-lactide) Homopolymers with Charged Termini

Poly(l-lactide) (PLLA)-based nanoparticles have attracted much attention with respect to applications in drug delivery and nanomedicine as a result of their biocompatibility and biodegradability. Nevertheless, the ability to prepare PLLA assemblies with well-defined shape and dimensions is limited and represents a key challenge. Herein we report access to a series of monodisperse complex and hierarchical colloidally stable 2D structures based on PLLA cores using the seeded growth, "living-crystallization-driven self-assembly" method. Specifically, we describe the formation of diamond-shaped platelet micelles and concentric "patchy" block co-micelles by using seeds of the charge-terminated homopolymer PLLA₂₄[PPh₂Me]I to initiate the sequential growth of either additional PLLA₂₄[PPh₂Me]I or a crystallizable blend of the latter with the block copolymer PLLA₄₂-b-P2VP₂₄₀, respectively. The epitaxial nature of the growth processes used for the creation of the 2D block co-micelles was confirmed by selected area electron diffraction analysis. Cross-linking of the P2VP corona of the peripheral block in the 2D block co-micelles using Pt nanoparticles followed by dissolution of the interior region in good solvent for PLLA led to the formation of novel, hollow diamond-shaped assemblies. We also demonstrate that, in contrast to the aforementioned results, seeded growth of the unsymmetrical PLLA BCPs PLLA₄₂-b-P2VP₂₄₀ or PLLA₂₀-b-PAGE₈₀ alone from 2D platelets leads to the formation of diamond-fiber hybrid structures.

Uniform electroactive fibre-like micelle nanowires for organic electronics

Micelles formed by the self-assembly of block copolymers in selective solvents have attracted widespread attention and have uses in a wide variety of fields, whereas applications based on their electronic properties are virtually unexplored. Herein we describe studies of solution-processable, low-dispersity, electroactive fibre-like micelles of controlled length from π-conjugated diblock copolymers containing a crystalline regioregular poly(3-hexylthiophene) core and a solubilizing, amorphous regiosymmetric poly(3-hexylthiophene) or polystyrene corona. Tunnelling atomic force microscopy measurements demonstrate that the individual fibres exhibit appreciable conductivity. The fibres were subsequently incorporated as the active layer in field-effect transistors. The resulting charge carrier mobility strongly depends on both the degree of polymerization of the core-forming block and the fibre length, and is independent of corona composition. The use of uniform, colloidally stable electroactive fibre-like micelles based on common π-conjugated block copolymers highlights their significant potential to provide fundamental insight into charge carrier processes in devices, and to enable future electronic applications.

Two-dimensional assemblies from crystallizable homopolymers with charged termini

The creation of shaped, uniform and colloidally stable two-dimensional (2D) assemblies by bottom-up methods represents a challenge of widespread current interest for a variety of applications. Herein, we describe the utilization of surface charge to stabilize self-assembled planar structures that are formed from crystallizable polymer precursors by a seeded growth approach. Addition of crystallizable homopolymers with charged end-groups to seeds generated by the sonication of block copolymer micelles with crystalline cores yields uniform platelet micelles with controlled dimensions. Significantly, the seeded growth approach is characterized by a morphological memory effect whereby the origin of the seed, which can involve a quasi-hexagonal or rectangular 2D platelet precursor, dictates the observed 2D platelet shape. This new strategy is illustrated using two different polymer systems, and opens the door to the construction of 2D hierarchical structures with broad utility.

Direct Formation of Large-Area 2D Nanosheets from Fluorescent Semiconducting Homopolymer with Orthorhombic Crystalline Orientation

Semiconducting polymers have been widely investigated due to their intriguing optoelectronic properties and their high crystallinity that provides a strong driving force for self-assembly. Although there are various reports of successful self-assembly of nanostructures using semiconducting polymers, direct in situ self-assembly of these polymers into two-dimensional (2D) nanostructures has proven difficult, despite their importance for optoelectronics applications. Here, we report the synthesis of a simple conjugated homopolymer by living cyclopolymerization of a 1,6-heptadiyne (having a fluorene moiety) and its efficient in situ formation of large-area 2D fluorescent semiconducting nanostructures. Using high-resolution imaging tools such as atomic force microscopy and transmission electron microscopy, we observed the solvent-dependent self-assembly behaviors of this homopolymer; the identical starting polymer formed 2D nanosheets with different shapes, such as rectangle, raft, and leaf, when dissolved in different solvents. Furthermore, super-resolution optical microscopy enabled the real-time imaging of the fluorescent 2D nanosheets, revealing their stable and uniform shapes, fluorescence, and solution dynamics. Notably, we propose an orthorhombic crystalline packing model to explain the direct formation of 2D nanostructures based on various diffraction patterns, providing important insight for their shape modulation during the self-assembly.

Dimensionally controlled water-dispersible amplifying fluorescent polymer nanoparticles for selective detection of charge-neutral analytes

Fluorescent nanoparticles composed of poly(p-phenylenevinylene) block copolymers were prepared by the facile one-step process and exhibited discriminative detection of neutral explosives against charged molecules.

A one-pot synthesis of polysulfane-bearing block copolymer nanoparticles with tunable size and refractive index

High sulfur-content polysulfane-bearing polymer nanoparticles with tunable size and refractive index were prepared from ROMP.

Importance of choosing the right polymerization method for in situ preparation of semiconducting nanoparticles from the P3HT block copolymer

Precise control on synthesis of P3HT-b-PT at the molecular level promotes more controlled in situ nanoparticlization to give more well-defined nanostructures.

Preparing DNA-mimicking multi-line nanocaterpillars via in situ nanoparticlisation of fully conjugated polymers

A unique hierarchical evolution from single-line nanocaterpillars to multi-line nanocaterpillars was demonstrated by in situ nanoparticlisation of fully conjugated poly(2,5-dihexyloxy-1,4-phenylene)-block-poly(3-methylthiophene).