Ligand noninnocence of thiolate/disulfide in dinuclear copper complexes: solvent-dependent redox isomerization and proton-coupled electron transfer

(Electro)chemical N2 Splitting by a Molybdenum Complex with an Anionic PNP Pincer-Type Ligand

Molybdenum(III) complexes bearing pincer-type ligands are well-known catalysts for N2-to-NH3 reduction. We investigated herein the impact of an anionic PNP pincer-type ligand in a Mo(III) complex on the (electro)chemical N2 splitting ([LMoCl3]-, 1 -, LH = 2,6-bis((di-tert-butylphosphaneyl)methyl)-pyridin-4-one). The increased electron-donating properties of the anionic ligand should lead to a stronger degree of N2 activation. The catalyst is indeed active in N2-to-NH3 conversion utilizing the proton-coupled electron transfer reagent SmI2/ethylene glycol. The corresponding Mo(V) nitrido complex 2H exhibits similar catalytic activity as 1H and thus could represent a viable intermediate. The Mo(IV) nitrido complex 3 - is also accessible by electrochemical reduction of 1 - under a N2 atmosphere. IR- and UV/vis-SEC measurements suggest that N2 splitting occurs via formation of an "overreduced" but more stable [(L(N2)2Mo0)2μ-N2]2- dimer. In line with this, the yield in the nitrido complex increases with lower applied potentials.

Switchable catalysis and CO2 sensing by reduction resistant, luminescent copper-thiolate complexes

Metal-thiolate complexes have been the focus of research for several years because of their unique photophysical properties and their use as a precursor for synthesizing various well-defined metal nanoclusters. A rational understanding of their structure-property relationship is necessary to realize their full potential in practical applications. Herein, we demonstrate the synthesis of a unique copper-thiolate complex with reversibly switchable catalytic and photoluminescence (PL) properties. The as-synthesized complex at basic pH (Complex B) showed cyan PL with a strong peak at ∼488 nm (cyan) and a small shoulder peak at ∼528 nm (green). When the pH of the complex was changed to acidic (Complex A), the PL was switched to light green. Such pH-responsive PL properties were demonstrated to be useful for pH and CO₂ sensing. The switchable properties originate from their two distinct structural states at two different pHs. We found that Complex A was resistant to high concentrations of a strong reducing agent, and had an intermediate oxidation state of copper (Cu⁺) with good thermodynamic stability. Furthermore, the switchable catalytic property was investigated with a 4-nitrophenol reduction and 3,3',5,5'-tetramethylbenzidine (TMB) oxidation reaction. The reduction kinetics followed pseudo-first-order, where the catalytic activity was enhanced by more than 10³ times when Complex B was switched to Complex A. A similar trend was also observed for TMB oxidation. Our design strategy demonstrates that redox switchable metal-thiolate complexes could be a powerful candidate for a plethora of applications.

Reversible Conversion of Disulfide/Dithiolate Occurring at a Vanadium(IV) Center: A Biomimetic System for Redox Exchange in Vanabin

Ascidians use a class of cysteine-rich proteins generally referred to as vanabins to reduce vanadium ions, one of the many biological processes that involve the redox conversion between disulfide and dithiolate mediated by transition-metal ions. To further understand the nature of disulfide/dithiolate exchange facilitated by a vanadium center, we report herein a six-coordinate non-oxido V^IV complex containing an unbound disulfide moiety, [V^IV(PS3″)(PS1″^S-S)] (1) (PS3″ = [P(C₆H₃-3-Me₃Si-2-S)₃]^3-, where PS1″^S-S is a disulfide form of PS3″). Complex 1 is obtained from a reaction of previously reported [V^V(PS3″)(PS2″S^H)] (2) (PS2″S^H = [P(C₆H₃-3-Me₃Si-2-SH)(C₆H₃-3-Me₃Si-2-S)₂] with TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidin-1-yl)oxyl) via hydrogen atom transfer. Importantly, complex 1 can be reduced by two electrons to form an eight-coordinate V^IV complex, [V^IV(PS3″)₂]^2- (4). The reaction can be reversed through a two-electron oxidation process to regenerate complex 1. The redox pathways both proceed through a common intermediate, [V(PS3″)₂]^- (3), that has been previously reported as a resonance form of V^V-dithiolate and a V^IV-(thiolate)(thiyl-radical) species. This work demonstrates an unprecedented example of reversible disulfide/dithiolate interconversion mediated by a V^IV center, as well as provides insights into understanding the function of V^V reductases in vanabins.

Copper(II) Ion Promoted Reverse Solvatochromic Response of the Silatrane Probe to Spectral Shifts: Preferential Solvation and Computational Approach

The unique solvatochromic attitude of an analyte owing to its coordination with metal ions in solvents of different polarities is challenging. Herein, we introduce two new solvatochromic 4-(pentan-3-yl) benzaldehyde-based triazolyl silatrane probes (5 and 6). The solvatochromic behavior of both probes 5 and 6 was studied using Reichardt's E (30) and the Kamlet-Taft empirical scale by UV-visible spectra in 14 solvents (hydrogen-bond donor (HBD) and non-HBD), and the results show that probes 5 and 6 exhibit reverse solvatochromism. Probe 5 witnessed an enhancement in this behavior upon coordination with the Cu²⁺ ion in MeCN/MeOH solvents due to the intramolecular charge transfer (ICT) process. Interestingly, the binding of probe 5 with Cu²⁺ ions resulted in an instant color change in MeCN and MeOH from pale yellow to light blue and brown-red, respectively, which can be easily detected by the "naked eye". A solvatochromic study of the complex 5-Cu²⁺ in binary mixtures of polar aprotic and polar protic solvents (MeCN/MeOH) discloses that the latter are more preferred over polar aprotic solvents in the solvation microsphere. The entire metal coordination process of probe 5 toward the Cu²⁺ ion can be visualized and was further evaluated by UV-vis/fluorescence spectral titrations, Fourier transform infrared (FT-IR) spectroscopy, and theoretical calculations employing density functional theory (DFT) and time-dependent-DFT (TD-DFT). The proposed analytical approach is believed to play a crucial role in the solvatochromic study of higher coordinated silicon compounds, which may be utilized to develop a solvent-dependent sensor.

Reaction of N-Acetylcysteine with Cu2+: Appearance of Intermediates with High Free Radical Scavenging Activity: Implications for Anti-/Pro-Oxidant Properties of Thiols

We studied the kinetics of the reaction of N-acetyl-l-cysteine (NAC or RSH) with cupric ions at an equimolar ratio of the reactants in aqueous acid solution (pH 1.4−2) using UV/Vis absorption and circular dichroism (CD) spectroscopies. Cu2+ showed a strong catalytic effect on the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical (ABTSr) consumption and autoxidation of NAC. Difference spectra revealed the formation of intermediates with absorption maxima at 233 and 302 nm (ε302/Cu > 8 × 103 M−1 cm−1) and two positive Cotton effects centered at 284 and 302 nm. These intermediates accumulate during the first, O2-independent, phase of the NAC autoxidation. The autocatalytic production of another chiral intermediate, characterized by two positive Cotton effects at 280 and 333 nm and an intense negative one at 305 nm, was observed in the second reaction phase. The intermediates are rapidly oxidized by added ABTSr; otherwise, they are stable for hours in the reaction solution, undergoing a slow pH- and O2-dependent photosensitive decay. The kinetic and spectral data are consistent with proposed structures of the intermediates as disulfide-bridged dicopper(I) complexes of types cis-/trans-CuI2(RS)2(RSSR) and CuI2(RSSR)2. The electronic transitions observed in the UV/Vis and CD spectra are tentatively attributed to Cu(I) → disulfide charge transfer with an interaction of the transition dipole moments (exciton coupling). The catalytic activity of the intermediates as potential O2 activators via Cu(II) peroxo-complexes is discussed. A mechanism for autocatalytic oxidation of Cu(I)−thiolates promoted by a growing electronically coupled −[CuI2(RSSR)]n− polymer is suggested. The obtained results are in line with other reported observations regarding copper-catalyzed autoxidation of thiols and provide new insight into these complicated, not yet fully understood systems. The proposed hypotheses point to the importance of the Cu(I)−disulfide interaction, which may have a profound impact on biological systems.

Probing the redox-conversion of Co(II)-disulfide to Co(III)-thiolate complexes: the effect of ligand-field strength

The redox-conversion reaction of cobalt(II)-disulfide to cobalt(III)-thiolate complexes triggered by addition of the bidentate ligand 2,2'-bipyridine has been investigated. Reaction of the cobalt(II)-disulfide complex [Co2(L1SSL1)(X)4] (L1SSL1 = di-2-(bis(2-pyridylmethyl)amino)-ethyldisulfide; X = Cl or Br) [1X] with 2,2'-bipyridine (bpy) resulted in the formation of two different products, namely the cobalt(III)-thiolate complex [Co(L1S)(bpy)]X2 and the unexpected side product [Co2(L1SSL1)(bpy)2(X)2]X2. Crystals of [Co2(L1SSL1)(bpy)2(Cl)2](BPh4)2 [2Cl](BPh4)2 obtained after anion exchange showed the cobalt(II) ions to be in octahedral geometries with the nitrogen donors of the disulfide ligand arranged in a facial conformation and the chloride ion trans to the tertiary amine nitrogen. Remarkably, this side product cannot be converted to the cobalt(III)-thiolate compound [Co(L1S)(bpy)](SbF6)2 [3](SbF6)2 by removal of the chloride ion with use of a silver salt, as this causes scrambling of the ligands, resulting in the formation of [Co(bpy)3]n+. [Co(L1S)(bpy)](SbF6)2 was obtained in a pure form by addition of bpy to a solution in acetonitrile of the compound [Co(L1S)(MeCN)2]2+ [4]2+. Addition of NEt4Cl to [3](SbF6)2 regenerates the cobalt(II)-disulfide complex [1Cl] as confirmed spectroscopically. DFT studies revealed that the conversion from [1Cl] to [3]2+ most likely occurs via the hypothetical intermediate species [2Cl]2+mer, in which the nitrogen atoms of the disulfide ligand are arranged in a meridional conformation. Interestingly, the estimated d-orbital splitting energy of [3]2+ is lower than that of [4]2+, indicating that the ligand-field strength of bpy is lower than anticipated, which hampers clean conversion in the redox-conversion reaction. This study shows that the redox-conversion reaction between cobalt(II)-disulfide and cobalt(III)-thiolate complexes is intricate rather than straightforward.

Revisiting Reduction of CO2 to Oxalate with First-Row Transition Metals: Irreproducibility, Ambiguous Analysis, and Conflicting Reactivity

Construction of higher C_≥2 compounds from CO₂ constitutes an attractive transformation inspired by nature's strategy to build carbohydrates. However, controlled C-C bond formation from carbon dioxide using environmentally benign reductants remains a major challenge. In this respect, reductive dimerization of CO₂ to oxalate represents an important model reaction enabling investigations on the mechanism of this simplest CO₂ coupling reaction. Herein, we present common pitfalls encountered in CO₂ reduction, especially its reductive coupling, based on established protocols for the conversion of CO₂ into oxalate. Moreover, we provide an example to systematically assess these reactions. Based on our work, we highlight the importance of utilizing suitable orthogonal analytical methods and raise awareness of oxidative reactions that can likewise result in the formation of oxalate without incorporation of CO₂. These results allow for the determination of key parameters, which can be used for tailoring of prospective catalytic systems and will promote the advancement of the entire field.

A Bioinspired Disulfide/Dithiol Redox Switch in a Rhenium Complex as Proton, H Atom, and Hydride Transfer Reagent

The transfer of multiple electrons and protons is of crucial importance in many reactions relevant in biology and chemistry. Natural redox-active cofactors are capable of storing and releasing electrons and protons under relatively mild conditions and thus serve as blueprints for synthetic proton-coupled electron transfer (PCET) reagents. Inspired by the prominence of the 2e^-/2H⁺ disulfide/dithiol couple in biology, we investigate herein the diverse PCET reactivity of a Re complex equipped with a bipyridine ligand featuring a unique SH···^-S moiety in the backbone. The disulfide bond in fac-[Re(^S-Sbpy)(CO)₃Cl] (1, ^S-Sbpy = [1,2]dithiino[4,3-b:5,6-b']dipyridine) undergoes two successive reductions at equal potentials of -1.16 V vs Fc^+|0 at room temperature forming [Re(^S2bpy)(CO)₃Cl]^2- (1^2-, ^S2bpy = [2,2'-bipyridine]-3,3'-bis(thiolate)). 1^2- has two adjacent thiolate functions at the bpy periphery, which can be protonated forming the S-H···^-S unit, 1H^-. The disulfide/dithiol switch exhibits a rich PCET reactivity and can release a proton (ΔG°_H⁺ = 34 kcal mol^-1, pK_a = 24.7), an H atom (ΔG°_H^• = 59 kcal mol^-1), or a hydride ion (ΔG°_H^- = 60 kcal mol^-1) as demonstrated in the reactivity with various organic test substrates.

Bis(μ-thiolato)-dicopper Containing Fully Spin Delocalized Mixed Valence Copper-Sulfur Clusters and Their Electronic Structural Properties with Relevance to the CuA Site

With aromatic and aliphatic thiol-S donor Schiff base ligands, the copper-sulfur clusters, [(L1)₈Cu^I₆Cu^II₂](ClO₄)₂·DMF·0.5CH₃OH (1) and [(L2)₁₂Cu^I₅Cu^II₁₁(μ₄-S)(μ₄-O)₆](ClO₄)·4H₂O, respectively, have been reported ( Chem. Commun. 2017, 53, 3334); HL1/HL2 are 2-(((3-methylthiophen-2-yl)methylene)amino)benzene/ethanethiol). Complex 1 comprises a wheel shaped Cu₈S₈ framework, made up of interlinked Cu₂{μ-S(R)}₂ units. To understand the properties with relevance to the Cu_A site and to check whether self-assembly generates similar type clusters to 1, three complexes, [(L3)₈Cu^I₆Cu^II₂](ClO₄)₂·(C₂H₅)₂O·2.5H₂O (2), [(L3^Cl)₈Cu^I₆Cu^II₂](ClO₄)₂·1.25(C₂H₅)₂O·1.25CH₃OH·2H₂O (3), and [(L3^CF3)₈Cu^I₆Cu^II₂](ClO₄)₂·2(C₂H₅)₂O·H₂O (4) have been synthesized with supporting ligands HL3^X (HL3 = 2-((furan-2-ylmethylene)amino)benzenethiol when X = -H; X = -Cl or -CF₃ para to thiol-S are HL3^Cl and HL3^CF3 ligands, respectively). The X-ray structures of 3 and 4 feature a similar Cu₈S₈ architecture to 1. The spectroscopic properties and the X-ray structures revealed that 2-4 are fully spin delocalized mixed valence (MV) of class-III type clusters. The structural parameters of the N₂Cu₂{μ-S(R)}₂ units of 3 and 4 closely resemble those of the MV binuclear Cu_A site. With the aid of UV-vis-NIR, EPR, and spectroelectrochemical studies, the electronic properties of these complexes have been described in comparison with the MV model complexes and Cu_A site.

Coordinating Ability of Anions, Solvents, Amino Acids, and Gases towards Alkaline and Alkaline-Earth Elements, Transition Metals, and Lanthanides

After briefly reviewing the applications of the coordination ability indices proposed earlier for anions and solvents toward transition metals and lanthanides, a new analysis of crystal structures is applied now to a much larger number of coordinating species: anions (including those that are present in ionic solvents), solvents, amino acids, gases, and a sample of neutral ligands. The coordinating ability towards s-block elements is now also considered. The effect of several factors on the coordinating ability will be discussed: (a) the charge of an anion, (b) the chelating nature of anions and solvents, (c) the degree of protonation of oxo-anions, carboxylates and amino carboxylates, and (d) the substitution of hydrogen atoms by methyl groups in NH₃ , ethylenediamine, benzene, ethylene, pyridine and aldehydes. Hit parades of solvents and anions most commonly used in the areas of transition metal, s-block and lanthanide chemistry are deduced from the statistics of their presence in crystal structures.

Metal–ligand cooperativity of a Co–P moiety

Metal–ligand cooperative redox reactions and intramolecular group transfer of a P–P containing dicobalt(i) species are shown.

Controlled Formation of Thiol-Thiolate Hydrogen versus Disulfide Bonds between Two Iridium(III) Centers

Here, we report an iridium(III) coordination system with 2-aminoethanethiolate (aet), which shows the formation of S-H⋅⋅⋅S hydrogen and S-S disulfide bonds in a controlled manner. Treatment of fac-[Ir(aet)₃ ] with aqueous HBF₄ under aerobic conditions gave dinuclear [Ir₂ (aet)₄ (cysta)]²⁺ ([1]²⁺ ; cysta=cystamine) with a single S-S disulfide bond, while dimeric [Ir₂ (aet)₃ (Haet)₃ ](BF₄ )₃ ([2](BF₄ )₃ ) with a triple S-H⋅⋅⋅S hydrogen bond was formed by similar treatment under anaerobic conditions. Upon exposure to air, [2]³⁺ was converted to dinuclear [Ir₂ (aet)₂ (Haet)₂ (cysta)]⁴⁺ ([3]⁴⁺ ), in which two Ir^III centers are spanned by a double S-H⋅⋅⋅S hydrogen bond and a single S-S disulfide bond. Complex [3]⁴⁺ was interconvertible with [1]²⁺ via the removal/addition of protons on S donors, accompanied by the intermolecular exchange of the fac-[Ir(aet)₃ ] units. Complexes [1]²⁺ , [2]³⁺ , and [3]⁴⁺ , isolated as BF₄ ^- salts, were fully characterized by single-crystal X-ray crystallography.

Palladium(II) Ion Mediated Disulfide/Thiolate Interconversion: Predicting the Disulfide Group State from First Principles

Different reactivity of homologous disulfides toward Pd²⁺ was previously reported: stepwise complexation to Pd²⁺ for l-cystine and cystamine ligands, while for dl-homocystine and 3,3'-dithiodipropionic acid, disulfide's disproportionation toward thiolate and sulfinic acid complexes is observed. The disulfide/thiolate interconversion of four different disulfide ligands in the presence of nonredox metal cation Pd²⁺ in aqueous solution has been computationally investigated. We see this different reactivity in different capacities of considered homologous disulfides to stabilize forming S,S'-binuclear complexes, which are believed to be key intermediates toward interconversion products. We thus devise a theoretical model that rationalizes experimentally observed phenomenon of disulfides different reactivity toward nonredox transition metal cation Pd²⁺.

Understanding Factors that Control the Structural (Dis)Assembly of Sulphur-Bridged Bimetallic Sites

Bimetallic structures of the general type [M2(µ-S)2] are omnipresent in nature, for biological function [M2(µ-S)2] sites interconvert between electronically distinct, but isostructural, forms. Different from structure-function relationships, the current understanding of the mechanism of formation and persistence of [M2(µ-S)2] sites is poorly developed. This work reports on bimetallic model compounds of nickel that interconvert between functional structures [Ni2(µ-S)2]+/2+ and isomeric congeners [2{κ-S–Ni}]2+/+, S = Aryl-S−, in which the nickel ions are geometrically independent. Interconversion of the two sets of structures was studied quantitatively by UV–VIS absorption spectroscopy and cyclic voltammetry. Assembly of the [Ni2(µ-S)2]+ core from [2{κ-S–Ni}]+ is thermodynamically and kinetically highly preferred over the disassembly of [Ni2(µ-S)2]2+ into [2{κ-S–Ni}]2+. Labile Ni-η2/3-bonding to aromatic π-systems of the primary thiophenol ligand is critical for modeling (dis)assembly processes. A phosphine coligand mimics the role of anionic donors present in natural sites that saturate metal coordination. Three parameters have been identified as critical for structure formation and persistence. These are, first, the stereoelectronic properties of the metals ions, second, the steric demand of the coligand, and, third, the properties of the dative bond between nickel and coligand. The energies of transition states connecting functional and precursor forms have been found to depend on these parameters.

Switching the Electron-Donating Ability of Phosphines through Proton-Responsive Imidazolin-2-ylidenamino Substituents

Stimuli-responsive ancillary ligands are valuable tools to control the activity and selectivity of transition-metal catalysts. The synthesis and characterization of a series of metal complexes containing phosphines with proton-responsive imidazolin-2-ylidenamino substituents are reported. Determination of the ligand-donor properties revealed that protonation of each substituent increases the Tolman electronic parameter (TEP) of the phosphine by 22 cm^-1 , hence allowing for switching of the electron-donor power of phosphine 2 within an unprecedented range (ΔTEP=43.4 cm^-1 ).

Redox Interconversion between Cobalt(III) Thiolate and Cobalt(II) Disulfide Compounds

The redox interconversion between Co(III) thiolate and Co(II) disulfide compounds has been investigated experimentally and computationally. Reactions of cobalt(II) salts with disulfide ligand L¹SSL¹ (L¹SSL¹ = di-2-(bis(2-pyridylmethyl)amino)-ethyl disulfide) result in the formation of either the high-spin cobalt(II) disulfide compound [Co^II₂(L¹SSL¹)Cl₄] or a low-spin, octahedral cobalt(III) thiolate compound, such as [Co^III(L¹S)(MeCN)₂](BF₄)₂. Addition of thiocyanate anions to a solution containing the latter compound yielded crystals of [Co^III(L¹S)(NCS)₂]. The addition of chloride ions to a solution of [Co^III(L¹S)(MeCN)₂](BF₄)₂ in acetonitrile results in conversion of the cobalt(III) thiolate compound to the cobalt(II) disulfide compound [Co^II₂(L¹SSL¹)Cl₄], as monitored with UV–vis spectroscopy; subsequent addition of AgBF₄ regenerates the Co(III) compound. Computational studies show that exchange by a chloride anion of the coordinated acetonitrile molecule or thiocyanate anion in compounds [Co^III(L¹S)(MeCN)₂]²⁺ and [Co^III(L¹S)(NCS)₂] induces a change in the character of the highest occupied molecular orbitals, showing a decrease of the contribution of the p orbital on sulfur and an increase of the d orbital on cobalt. As a comparison, the synthesis of iron compounds was undertaken. X-ray crystallography revealed that structure of the dinuclear iron(II) disulfide compound [Fe^II₂(L¹SSL¹)Cl₄] is different from that of cobalt(II) compound [Co^II₂(L¹SSL¹)Cl₄]. In contrast to cobalt, reaction of ligand L¹SSL¹ with [Fe(MeCN)₆](BF₄)₂ did not yield the expected Fe(III) thiolate compound. This work is an unprecedented example of redox interconversion between a high-spin Co(II) disulfide compound and a low-spin Co(III) thiolate compound triggered by the nature of the anion.

Low-spin Co^III−thiolate compounds and high-spin Co^II and Fe^II disulfide compound have been synthesized from reactions of a disulfide ligand with Co^II and Fe^II salts. The redox interconversion between the cobalt compounds has been investigated. It is shown that addition of chloride ions to a solution of the Co^III−thiolate compound results in the formation of the Co^II-disulfide compound, whereas removal of chloride anions from the Co^II disulfide compound regenerates the Co^III−thiolate complex.

Walking the seven lines: binuclear copper A in cytochrome c oxidase and nitrous oxide reductase

The enzymes nitrous oxide reductase (N2OR) and cytochrome c oxidase (COX) are constituents of important biological processes. N2OR is the terminal reductase in a respiratory chain converting N₂O to N₂ in denitrifying bacteria; COX is the terminal oxidase of the aerobic respiratory chain of certain bacteria and eukaryotic organisms transforming O₂ to H₂O accompanied by proton pumping. Different spectroscopies including magnetic resonance techniques, were applied to show that N2OR has a mixed-valent Cys-bridged [Cu^1.5+(CyS)₂Cu^1.5+] copper site, and that such a binuclear center, called CuA, does also exist in COX. A sequence motif shared between the CuA center of N2OR and the subunit II of COX raises the issue of a putative evolutionary relationship of the two enzymes. The suggestion of a binuclear CuA in COX, with one unpaired electron delocalized between two equivalent Cu nuclei, was difficult to accept originally, even though regarded as a clever solution to many experimental observations. This minireview in honor of Helmut Sigel traces several of the critical steps forward in understanding the nature of CuA in N2OR and COX, and discusses its unique electronic features to some extent including the contributions made by the development of methodology and the discovery of a novel multi-copper enzyme. Left: X-band (9.130 GHz) and C-band (4.530 GHz, 1st harmonic display of experimental spectrum) EPR spectra of bovine heart cytochrome c oxidase, recorded at 20K. Right: Ribbon presentation of the CuA domain in cytochrome c oxidase and nitrous oxide reductase.

Synthesis, Radical Reactivity, and Thermochemistry of Monomeric Cu(II) Alkoxide Complexes Relevant to Cu/Radical Alcohol Oxidation Catalysis

Two new monomeric Cu(II) alkoxide complexes were prepared and fully characterized as models for intermediates in copper/radical mediated alcohol oxidation catalysis: Tp(tBuR)Cu(II)OCH2CF3 with Tp(tBu) = hydro-tris(3-tert-butyl-pyrazol-1-yl)borate 1 or Tp(tBuMe) = hydro-tris(3-tert-butyl-5-methyl-pyrazol-1-yl)borate 2. These complexes were made as models for potential intermediates in enzymatic and synthetic catalytic cycles for alcohol oxidation. However, the alkoxide ligands are not readily oxidized by loss of H; instead, these complexes were found to be hydrogen atom acceptors. They oxidize the hydroxylamine TEMPOH, 2,4,6-tri-t-butylphenol, and 1,4-cyclohexadiene to the nitroxyl radical, phenoxyl radical, and benzene, with formation of HOCH2CF3 (TFE) and the Cu(I) complexes Tp(tBuR)Cu(I)-MeCN in dichloromethane/1% MeCN or 1/2 [Tp(tBuR)Cu(I)]2 in toluene. On the basis of thermodynamics and kinetics arguments, these reactions likely proceed through concerted proton-electron transfer mechanisms. Thermochemical analyses give lower limits for the "effective bond dissociation free energies (BDFE)" of the O-H bonds in 1/2[Tp(tBuR)Cu(I)]2 + TFE and upper limits for the free energies associated with alkoxide oxidations via hydrogen atom transfer (effective alkoxide α-C-H BDFEs). These values are summations of the free energies of multiple chemical steps, which include the energetically favorable formation of 1/2[Tp(tBuR)Cu(I)]2. The effective alkoxide α-C-H bonds are very weak, BDFE ≤ 38 ± 4 kcal mol(-1) for 1 and ≤44 ± 5 kcal mol(-1) for 2 (gas-phase estimates), because C-H homolysis is thermodynamically coupled to one electron transfer to Cu(II) as well as the favorable formation of the 1/2[Tp(tBuR)Cu(I)]2 dimer. Treating 1 with the H atom acceptor (t)Bu3ArO(•) did not result in the expected alkoxide oxidation to an aldehyde, but rather net 2,2,2-trifluoroethoxyl radical transfer occurred to generate an unusual 2-substituted dienone-ether product. Treating 2 with (t)Bu3ArO(•) gives no reaction, despite evidence that overall ligand oxidation and formation of 1/2[Tp(tBuMe)Cu(I)]2 is significantly exoergic. The origin of this lack of reactivity may be due to insufficient weakening of the alcohol α-C-H bond upon complexation to copper.

Novel hierarchical NiO nanoflowers exhibiting intrinsic superoxide dismutase-like activity

Novel hierarchical NiO nanoflowers assembled by ultrathin nanoflakes were found to exhibit intrinsic superoxide dismutase-like activity for the first time.

Catalytic catechol oxidation by copper complexes: development of a structure–activity relationship

High activity for the catalytic oxidation of 3,5-di-tert-butylcatechol was achieved with complexes of ligands that stabilize the biomimetic Cu^II μ-thiolate complex, hinting at a similarity with the required Cu-oxo intermediates.

Thermodynamics of the Cu(II) μ-thiolate and Cu(I) disulfide equilibrium: a combined experimental and theoretical study

The redox equilibrium between dinuclear Cu(II) μ-thiolate and Cu(I) disulfide structures has been analyzed experimentally and via DFT calculations. Two new ligands, L(2)SSL(2) and L(4)SSL(4), and their Cu(II) μ-thiolate and Cu(I) disulfide complexes were synthesized. For L(2)SSL(2), these two redox-isomeric copper species are shown to be in equilibrium, which depends on both temperature and solvent. For L(4)SSL(4) the μ-thiolate species forms as the kinetic product and further evolves into the disulfide complex under thermodynamic control, which creates the unprecedented possibility to compare both species under the same reaction conditions. The energies of the μ-thiolate and disulfide complexes for two series of related ligands have been calculated with DFT; the results rationalize the experimentally observed structures, and emphasize the important role that steric requirements play in the formation of the Cu(II) thiolate structure.