A Photochemical Strategy for Lignin Degradation at Room Temperature

Construction of a hollow heterojunction interface to accelerate the photocatalytic cleavage of lignin Cβ-O bonds

Photocatalytic splitting of the Cβ-O bond is regarded as a prospective strategy for transforming lignin, and it is imperative to develop novel photocatalysts with effective photogenerated charges separation and solar absorption capacity. Herein, a novel hollow ZIF-8/CdS heterostructure photocatalyst was synthesized for the catalytic splitting of lignin Cβ-O bonds. The photocatalytic cleavage rate of Cβ-O bond of ligin β-O-4 reached 30.3∙mmol∙h-1∙g-1 within 20 min under visible light exposure. It is noteworthy that the utilization of intricate natural lignin molecules in this photocatalytic system has yielded successful depolymerization. The DFT and XPS results indicate a potential unidirectional electron migration from ZIF-8 to CdS in ZIF-8/CdS composites transfer. This electron transport path follows the direct Z-scheme heterostructure mechanism, resulting in the generation of an internal electric field between ZIF-8 and CdS. Impressively, the synergistic combination of the hollow structure and Z-scheme heterostructure effectively enhances the efficiency of charge carrier separation and maintains a robust redox potential, thereby facilitating Cα-radical generation. This study proposes a novel photocatalyst design strategy that integrates hollow structures and Z-scheme heterojunctions, with the aim of targeting the depolymerization of the Cβ-O bond in lignin.

Light-Driven Formate-Salts-Induced Cleavage of Oxidized Lignin Model Compounds

We report a light-induced cleavage of oxidized lignin model compounds utilizing formate salts. For compounds containing an aliphatic hydroxyl (γ-OH) group, the employment of a hydrogen atom transfer (HAT) catalyst was crucial to preserving the efficacy of the fragmentation reaction. Furthermore, we successfully converted a trimeric oxidized model compound into the desired products with moderate yields.

A De Novo Metalloenzyme for Cerium Photoredox Catalysis

Cerium photoredox catalysis has emerged as a powerful strategy to activate molecules under mild conditions. Radical intermediates are formed using visible light and simple complexes of the earth-abundant lanthanide. Here, we report an artificial photoenzyme enabling this chemistry inside a protein. We utilize a de novo designed protein scaffold that tightly binds lanthanide ions in its central cavity. Upon visible-light irradiation, the cerium-dependent enzyme catalyzes the radical C-C bond cleavage of 1,2-diols in aqueous solution. Protein engineering led to variants with improved photostability and metal binding behavior. The photoenzyme cleaves a range of aromatic and aliphatic substrates, including lignin surrogates. Surface display of the protein scaffold on Escherichia coli facilitates whole-cell photobiocatalysis. Furthermore, we show that also natural lanthanide-binding proteins are suitable for this approach. Our study thus demonstrates a new-to-nature enzymatic photoredox activity with broad catalytic potential.

Visible-light-driven selective cleavage of lignin C-C bonds on the TiO2@g-C3N4heterostructured photocatalyst

The selective cleavage of lignin C-C bonds is a highly sought-after process with the goal of obtaining low-molecular-weight aromatic chemicals from renewable resources. However, it remains a challenging task to achieve under mild conditions. Photocatalysis is a potentially promising approach to address this issue, but the development of efficient photocatalysts is still in progress. In this study, we introduce the heterostructured TiO2@g-C3N4photocatalyst for the development of a visible light photocatalytic procedure for the selective cleavage of lignin C-C bonds under mild conditions. The photocatalyst displays favourable visible light absorption, efficient charge separation efficiency, and promising reusability. A typicalβ-O-4 dimer model, 2-phenoxy-1-phenylethanol, was effectively (96.0% conversion) and selectively (95.0 selectivity) cleaved under visible light at ambient conditions. This photocatalytic procedure was also effective when subjected to solar irradiation or other lignin dimer models withβ-O-4 orβ-1 linkages. This reaction occurred through a Cβ-centred radical intermediate and a six-membered transition state with photogenerated holes as the primary active species. The Cα-OH oxidative dehydrogenation of the substrate could also take place but was a relatively minor route. This study provides a new photocatalytic procedure for visible-light-driven lignin valorisation and sheds light on the design of high-performance nanocomposite photocatalysts for C-C bond cleavage.

Redox-neutral depolymerization of lignin-derived aryl ethers catalyzed by Rh(III)-complexes: a mechanistic insight

Density functional theory (DFT) calculations at the TPSSh-D3(BJ)/def2-TZVP (SMD, water) level of theory were performed to understand the mechanism of redox-neutral depolymerization of four types of lignin-derived aryl ether dimers catalyzed by rhodium-terpyridine ([Rh]) and a binuclear Rh complex ([2Rh]). The cleavage of the Cβ-O bond in the β-O-4 model compound was initiated by the dehydrogenation of the alcohol moiety into a ketone intermediate, followed by the reductive cleavage of the ether bond, producing phenol and aromatic ketone products. The [Rh]-OH intermediate, generated by the interaction between the Rh-complex and NaOH, facilitated the transformation of the alcohol group to a CO group in the lignin model compound and subsequent H-transfer, selectively forming rhodium-H active species and the ketone intermediate. The [2Rh]-H complex exhibited high reactivity, with energy barriers for a rate-determining Cβ-O bond breakage of 35.3 kcal mol-1. In contrast to 1-phenylethan-1-ol and H2, lignin itself acted as a good hydrogen source to generate [Rh]-H species. The transformation of β-O-4 model compounds with the γ-OH group occurred via the elimination of the γ-OH group, reduction of the CC bond, and Cβ-O bond cleavage steps. However, since lignin itself was unable to supply enough hydrogen to form [Rh]-H species, the aromatic products were obtained in low yields, as observed in the experiment.

Excited State Bond Homolysis of Vanadium(V) Photocatalysts for Alkoxy Radical Generation

Advancements in photocatalysis have transformed synthetic organic chemistry, using light as a powerful tool to drive selective chemical transformations. Recent approaches have focused on metal-halide ligand-to-metal charge transfer (LMCT) photoactivated bond homolysis reactions leveraged by earth-abundant elements to generate valuable synthons for radical-mediated cross-coupling reactions. Of recent utility, oxovanadium(V) LMCT photocatalysts exhibit selective alkoxy radical generation from aliphatic alcohols upon blue light (UVA) irradiation under mild conditions. The selective photochemical liberation of alkoxy radicals is valuable for applying late-stage fragmentation approaches in organic synthesis and depolymerization strategies for nonbiodegradable polymers. Steady-state and time-resolved spectroscopy were used to assign the electronic structure of three well-defined V(V) photocatalysts in their ground and excited states. We assign the excited state for this transformation at earth-abundant vanadium(V), interrogating the electronic structure using static UV-visible absorption, ultrafast transient absorption, and electron paramagnetic resonance spectroscopy coupled to computational approaches. These findings afford assignments of the short-lived excited state intermediates that dictate selective homolytic bond cleavage in metal alkoxides, illustrating the valuable insight gleaned from fundamental investigations of the molecular photochemistry responsible for light-escalated chemical transformations.

Photorefinery of Biomass and Plastics to Renewable Chemicals using Heterogeneous Catalysts

The photocatalytic conversion of biomass and plastic waste provides opportunities for sustainable fuel and chemical production. Heterogeneous photocatalysts, typically composed of semiconductors with distinctive redox properties in their conduction band (CB) and valence band (VB), facilitate both the oxidative and reductive valorization of organic feedstocks. This article provides a comprehensive overview of recent advancements in the photorefinery of biomass and plastics from the perspective of the redox properties of photocatalysts. We explore the roles of the VB and CB in enhancing the value-added conversion of biomass and plastics via various pathways. Our aim is to bridge the gap between photocatalytic mechanisms and renewable carbon feedstock valorization, inspiring further development in photocatalytic refinery of biomass and plastics.

Long Excited-State Lifetimes in Three-Coordinate Copper(I) Complexes via Triplet-Triplet Energy Transfer to Pyrene-Decorated Isocyanides

There has been much effort to improve excited-state lifetimes in photosensitizers based on earth-abundant first-row transition metals. Copper(I) complexes have gained significant attention in this field, and in most cases, sterically driven approaches are used to optimize their lifetimes. This study presents a series of three-coordinate copper(I) complexes (Cu1-Cu3) where the excited-state lifetime is extended by triplet-triplet energy transfer. The heteroleptic compounds feature a cyclohexyl-substituted β-diketiminate (CyNacNacMe) paired with aryl isocyanide ligands, giving the general formula Cu(CyNacNacMe)(CN-Ar) (CN-dmp = 2,6-dimethylphenyl isocyanide for Cu1; CN-pyr = 1-pyrenyl isocyanide for Cu2; CN-dmp-pyr = 2,6-dimethyl-4-(1-pyrenyl)phenyl isocyanide for Cu3). The nature, energies, and dynamics of the low-energy triplet excited states are assessed with a combination of photoluminescence measurements at room temperature and 77 K, ultrafast transient absorption (UFTA) spectroscopy, and DFT calculations. The complexes with the pyrene-decorated isocyanides (Cu2 and Cu3) exhibit extended excited-state lifetimes resulting from triplet-triplet energy transfer (TTET) between the short-lived charge-transfer excited state (3CT) and the long-lived pyrene-centered triplet state (3pyr). This TTET process is irreversible in Cu3, producing exclusively the 3pyr state, and in Cu2, the 3CT and 3pyr states are nearly isoenergetic, enabling reversible TTET and long-lived 3CT luminescence. The improved photophysical properties in Cu2 and Cu3 result in improvements in activity for both photocatalytic stilbene E/Z isomerization via triplet energy transfer and photoredox transformations involving hydrodebromination and C-O bond activation. These results illustrate that the extended excited-state lifetimes achieved through TTET result in newly conceived photosynthetically relevant earth-abundant transition metal complexes.

Light switching for product selectivity control in photocatalysis

Artificial switchable catalysis is a new, rapidly expanding field that offers great potential advantages for both homogeneous and heterogeneous catalytic systems. Light irradiation is widely accepted as the best stimulus to artificial switchable chemical systems. In recent years, tremendous progress has been made in the synthesis and application of photo-switchable catalysts that can control when and where bond formation and dissociation take place in reactant molecules. Photo-switchable catalysis is a niche area in current catalysis, on which systematic analysis and reviews are still lacking in the scientific literature, yet it offers many intriguing and versatile applications, particularly in organic synthesis. This review aims to highlight the recent advances in photo-switchable catalyst systems that can result in two different chemical product outcomes and thus achieve a degree of control over organic synthetic reactions. Furthermore, this review evaluates different approaches that have been employed to achieve dynamic control over both the catalytic function and the selectivity of several different types of synthesis reactions, along with the remaining challenges and potential opportunities. Owing to the great diversity of the types of reactions and conditions adopted, a quantitative comparison of efficiencies between considered systems is not the focus of this review, instead the review showcases how insights from successful adopted strategies can help better harness and channel the power of photoswitchability in this new and promising area of catalysis research.

Cloning, expression and application of a novel laccase derived from water buffalo ruminal lignin-degrading bacteria

Water buffalo is the only mammal found to degrade lignin so far, and laccase plays an indispensable role in the degradation of lignin. In this study, multiple laccase genes were amplified based on the water buffalo rumen derived lignin-degrading bacteria Bacillus cereus and Ochrobactrum pseudintermedium. Subsequently, the corresponding recombinant plasmids were transformed into E. coli expression system BL21 (DE3) for induced expression by Isopropyl-β-D-thiogalactopyranoside (IPTG). After preliminary screening, protein purification and enzyme activity assays, Lac3833 with soluble expression and high enzyme activity was selected to test its characteristics, especially the ability of lignin degradation. The results showed that the optimum reaction temperature of Lac3833 was 40 °C for different substrates. The relative activity of Lac3833 reached the highest at pH 4.5 and pH 5.5 when the substrates were ABTS or 2,6-DMP and guaiacol, respectively. Additionally, Lac3833 could maintain high enzyme activity in different temperatures, pH and solutions containing Na+, K+, Mg2+, Ca2+ and Mn2+. Importantly, compared to negative treatment, recombinant laccase Lac3833 treatment showed that it had a significant function in degrading lignin. In conclusion, this is a pioneering study to produce recombinant laccase with lignin-degrading ability by bacteria from water buffalo rumen, which will provide new insights for the exploitation of more lignin-degrading enzymes.

Photocatalytic, Oxidative Cleavage of C-C Bond in Lignin Models and Native Lignin

It is challenging to realize the selective C-C bond cleavage of lignin β-O-4 linkages for production of high-value aromatic chemicals due to its intrinsic inertness and complex structure. Here we report a light-driven, chlorine-radical-based protocol to realize the oxidative C-C bond cleavage in various lignin model compounds catalyzed by commercially available TPT and CaCl2, achieving high conversion and good to high product yields at room temperature. Mechanistic studies reveal that the preferential activation of Cβ-H bond facilitates the oxidation and C-C bond cleavage of lignin β-O-4 model via chlorine radical. Furthermore, this method is also applicable to the depolymerization of natural lignin extracts, furnishing the aromatic oxygenates from the cleavage of Cα-Cβ bonds. This study provides experimental foundations to the depolymerization and valorization of lignin into high value-added aromatic compounds.

Light-driven polymer recycling to monomers and small molecules

Only a small proportion of global plastic waste is recycled, of which most is mechanically recycled into lower quality materials. The alternative, chemical recycling, enables renewed production of pristine materials, but generally comes at a high energy cost, particularly for processes like pyrolysis. This review focuses on light-driven approaches for chemically recycling and upcycling plastic waste, with emphasis on reduced energy consumption and selective transformations not achievable with heat-driven methods. We focus on challenging to recycle backbone structures composed of mainly C‒C bonds, which lack functional groups i.e., esters or amides, that facilitate chemical recycling e.g., by solvolysis. We discuss the use of light, either in conjunction with heat to drive depolymerization to monomers or via photocatalysis to transform polymers into valuable small molecules. The structural prerequisites for these approaches are outlined, highlighting their advantages as well as limitations. We conclude with an outlook, addressing key challenges, opportunities, and provide guidelines for future photocatalyst (PC) development.

Inorganic-Organic Dual-Ligand-Regulated Photocatalysis of CdS@ZnxCd1-xS@ZnS Quantum Dots for Lignin Valorization

In a dual-functional lignin valorization system, a harmonious oxidation and reduction rate is a prerequisite for high photocatalytic performance. Herein, an efficient and facile ligand manipulating strategy to balance the redox reaction process is exploited via decorating the surface of the CdS@ZnxCd1-xS@ZnS gradient-alloyed quantum dots with both inorganic ligands of hexafluorophosphate (PF6-) and organic ligands of mercaptopropionic acid (MPA). Inorganic ion ligands in this system provide a promotion for intermediator reduction reactions. By optimizing the ligand composition on the quantum dot surface, we achieve precise control over the extent of oxidation and reduction, enabling selective modification of reaction products; that is, the conversion rate of 2-phenoxy-1-phenylethanol reached 99%. Surface engineering by regulating the ligand type demonstrates that PF6- and thiocyanate (SCN-) inorganic ion ligands contribute significantly toward electron transfer, while MPA ligands have beneficial effects on the hole-transfer procedure, which is predominantly dependent on their steric hindrance, electrostatic action, and passivation effect. The present study offers insights into the development of efficient quantum dot photocatalysts for dual-functional biomass valorization through ligand design.

Photocatalytic Conversion of Lignin Models into Functionalized Aromatic Molecules Initiated by the Proton-Coupled Electron Transfer Process

A mild and efficient method for lignin β-O-4 cleavage and functionalization was achieved via photocatalysis. This protocol exhibits a broad scope of lignin models and excellent compatibility of functionalization reagents, constructing a series of functionalized lignin-based aromatic compounds. Highly selective formation of alkyl radical species through a proton-coupled electron transfer and β-scission process provides the opportunity to form new C-C and C-N bonds by reaction with electrophilic reagents.

CsPbBr3 Quantum Dots Promoted Depolymerization of Oxidized Lignin via Photocatalytic Semi-Hydrogenation/Reduction Strategy

Due to the demanding depolymerization conditions and limited catalytic efficiency, enhancing lignin valorization remains challenging. Therefore, lowering the bond dissociation energy (BDE) has emerged as a viable strategy for achieving mild yet highly effective cleavage of bonds. In this study, a photocatalytic semi-hydrogenation/reduction strategy utilizing CsPbBr3 quantum dots (CPB-QDs) and Hantzsch ester (HEH2 ) as a synergistic catalytic system was introduced to reduce the BDE of Cβ -O-Ar, achieving effective cleavage of the Cβ -O-Ar bond. This strategy offers a wide substrate scope encompassing various β-O-4 model lignin dimers, preoxidized β-O-4 polymers, and native oxidized lignin, resulting in the production of corresponding ketones and phenols. Notably, this approach attained a turnover frequency (TOF) that is 17 times higher than that of the reported Ir-catalytic system in the photocatalytic depolymerization of the lignin model dimers. It has been observed via meticulous experimentation that HEH2 can be activated by CPB-QDs via single electron transfer (SET), generating HEH2 ⋅+ as a hydrogen donor while also serving as a hole quencher. Moreover, HEH2 ⋅+ readily forms an active transition state with the substrates via hydrogen bonding. Subsequently, the proton-coupled electron transfer (PCET) from HEH2 ⋅+ to the carbonyl group of the substrate generates a Cα ⋅ intermediate.

Selective Electrocatalytic Degradation of Ether-Containing Polymers

Leveraging electrochemistry to degrade robust polymeric materials has the potential to impact society's growing issue of plastic waste. Herein, we develop an electrocatalytic oxidative degradation of polyethers and poly(vinyl ethers) via electrochemically mediated hydrogen atom transfer (HAT) followed by oxidative polymer degradation promoted by molecular oxygen. We investigated the selectivity and efficiency of this method, finding our conditions to be highly selective for polymers with hydridic, electron-rich C-H bonds. We leveraged this reactivity to degrade polyethers and poly(vinyl ethers) in the presence of polymethacrylates and polyacrylates with complete selectivity. Furthermore, this method made polyacrylates degradable by incorporation of ether units into the polymer backbone. We quantified degradation products, identifying up to 36 mol % of defined oxidation products, including acetic acid, formic acid, and acetaldehyde, and we extended this method to degrade a polyether-based polyurethane in a green solvent. This work demonstrates a facile, electrochemically-driven route to degrade polymers containing ether functionalities.

Full biomass-based multifunctional flocculant from lignin and cationic starch

Flocculation is a common process for wastewater treatment. However, the most commonly used organic synthetic flocculants such as polyacrylamide are petroleum-based. In this work, biomass lignin was grafted with cationic starch to synthesize low-cost, green and fully biomass-based multifunctional flocculants. The cationic polyacrylamide was replaced by cheap industrial cationic starch. Hyperbranched multifunctional lignin-grafted cationic starch flocculant (CS-L) was successfully prepared via ring-opening reaction with epichlorohydrin. The mass content of lignin in the grafted product was between 16.6 % and 70.1 %. With the dosage of CS-L between 4.0 and 7.5 mg/l, the turbidity removal rate for 500 mg/l kaolin suspension reached more than 97 %. When the dosage of CS-L was 24 mg/l, the removal rate of 50 mg/l Cu2+ reached 85.7 %. Importantly, when the mixed solution of kaolin particles and Cu2+ was treated, the synchronous removal rates of kaolin and Cu2+ reached 90 % and 72 % respectively in the range of 8.0-12.0 mg/l flocculant addition. The synthesized lignin-grafted cationic starch flocculant showed an excellent multifunctional flocculation function.

Molecular mechanism of the transformation of oxidized lignin to N-substituted aromatics

The cleavage of C-C bonds in oxidized lignin model compounds is a highly effective methodology for achieving lignin depolymerization, as well the generation of N-substituted aromatics. Here, density functional theory calculations were performed to understand the mechanism of the transformation of an oxidized lignin model compound (ligninox) and hydroxylamine hydrochloride to N-substituted aromatics. The reaction was proposed to proceed via an energetically viable mechanism featuring the initial production of HOAc acting as proton bridge. According to our calculations, Z-type oxime is the major intermediate of the reaction, with an energy barrier of 22.9 kcal mol-1, owing to the weak interactions between methoxy and oximino groups being stronger than that of E-type oxime. Additionally, the hydroxy addition is the rate-determining step, with an energy barrier of 27.0 kcal mol-1. Moreover, the huge net energy change of Beckmann and abnormal Beckmann rearrangements is the main overall thermodynamic driving force for producing N-substituted aromatics from oximes. The theoretical results have provided a clear picture of how ligninox transforms into N-substituted aromatics and are expected to provide valuable theoretical guidance for lignin depolymerization.

Photoinduced Borylation of the Inert C(sp3)-O Bond of Alkyl Heteroaryl Ethers

A photoinduced reductive Calkyl-O borylation of alkyl heteroaryl ethers with very negative reduction potential in the presence of 4-dimethylaminopyridine (DMAP) and bis(catecholato)diborane(B2cat2) was developed. Despite the high reducing power, various substrates with liable functional groups were well-tolerated as well as ethers derived from natural products and medicinal-relevant compounds. Mechanistic investigation implied that an intra-single electron transfer process in an electron donor-acceptor complex formed from ethers with the adduct of B2cat2 and DMAP should be involved.

Radical-Mediated Photocatalysis for Lignocellulosic Biomass Conversion into Value-Added Chemicals and Hydrogen: Facts, Opportunities and Challenges

Photocatalytic biomass conversion into high-value chemicals and fuels is considered one of the hottest ongoing research and industrial topics toward sustainable development. In short, this process can cleave Cβ -O/Cα -Cβ bonds in lignin to aromatic platform chemicals, and further conversion of the polysaccharides to other platform chemicals and H2 . From the chemistry point of view, the optimization of the unique cooperative interplay of radical oxidation species (which are activated via molecular oxygen species, ROSs) and substrate-derived radical intermediates by appropriate control of their type and/or yield is key to the selective production of desired products. Technically, several challenges have been raised that face successful real-world applications. This review aims to discuss the recently reported mechanistic pathways toward selective biomass conversion through the optimization of ROSs behavior and materials/system design. On top of that, through a SWOT analysis, we critically discussed this technology from both chemistry and technological viewpoints to help the scientists and engineers bridge the gap between lab-scale and large-scale production.

Secondary Amines from Catalytic Amination of Bio-Derived Phenolics over Pd/C and Rh/C: Effect of Operation Parameters

The production of renewable chemicals using lignocellulosic biomass has gained significant attention in green chemistry. Among biomass-derived chemicals, secondary amines have emerged as promising intermediates for synthetic applications. Here, we report a systematic study on the reductive amination of phenolics with cyclohexylamine using Pd/C and Rh/C as catalysts. The catalytic tests were performed in batch reactors under different reaction conditions (various: amine concentration (0.1–0.4 mol/L), hydrogen pressure (0–2.5 bar), temperature (80–160 °C), and substituted phenols (phenol, o-cresol, p-cresol, and methoxyphenol)) and using tert-amyl alcohol as a solvent. The experimental observations were consistent with a multi-step mechanism, where hydrogenation of phenol to cyclohexanone is followed by condensation of the ketone with cyclohexylamine to form an imine, which is finally hydrogenated to produce secondary amines. In addition, there was evidence of parallel self-condensation of the cyclohexylamine. The study also supported a limited dehydrogenation capacity of Rh/C, unlike Pd/C, which increases this capacity at higher temperatures generating a higher yield of cyclohexylaniline (up to 15%). The study of the alkylated phenols demonstrated that the nature and propensity of hydrogenation of the phenolic controls their amination. Kinetic analysis revealed reaction orders between 0.4 and 0.7 for H2, indicating its dissociative adsorption. Meanwhile, phenol’s order (between 1–1.8) suggests a single participation of this compound in the hydrogenation step. The order of 0.4 for cyclohexylamine suggests its participation as a surface-abundant species. The apparent activation energies derived from a power law approximation were of 37 kJ/mol and 10 kJ/mol on Pd/C and Rh/C, respectively.

Lignin C-C bond cleavage induced by consecutive two-photon excitation of a metal-free photocatalyst

Photocatalytic lignin valorization has caught widespread attention; yet the reaction systems often employ noble metal complexes, hydrogen atom transfer (HAT) agents, and/or sacrificial electron donors/acceptors that do not comply with atom economy or environmental friendliness. Herein, we discovered that N-phenylphenothiazine (PTH) as a metal-free photocatalyst induced the cleavage of the lignin C_α-C_β bond under ambient conditions free of those additional agents with a high yield and selectivity toward benzoic acid. Transient spectroscopic investigations revealed that the energy-demanding C_α-C_β bond cleavage was induced by the potent oxidant, ²PTH˙⁺*, that was derived from consecutive two-photon excitation of PTH.

Plasmonic Silver-Nanoparticle-Catalysed Hydrogen Abstraction from the C(sp3 )-H Bond of the Benzylic Cα atom for Cleavage of Alkyl Aryl Ether Bonds

Selective activation of the C(sp3 )-H bond is an important process in organic synthesis, where efficiently activating a specific C(sp3 )-H bond without causing side reactions remains one of chemistry's great challenges. Here we report that illuminated plasmonic silver metal nanoparticles (NPs) can abstract hydrogen from the C(sp3 )-H bond of the Cα atom of an alkyl aryl ether β-O-4 linkage. The intense electromagnetic near-field generated at the illuminated plasmonic NPs promotes chemisorption of the β-O-4 compound and the transfer of photo-generated hot electrons from the NPs to the adsorbed molecules leads to hydrogen abstraction and direct cleavage of the unreactive ether Cβ -O bond under moderate reaction conditions (≈90 °C). The plasmon-driven process has certain exceptional features: enabling hydrogen abstraction from a specific C(sp3 )-H bond, along with precise scission of the targeted C-O bond to form aromatic compounds containing unsaturated, substituted groups in excellent yields.

Photoelectrochemical approaches for the conversion of lignin at room temperature

The selective cleavage of C-C/C-O linkages represents a key step toward achieving the chemical conversion of biomass to targeted value-added chemical products under ambient conditions. Using photoelectrosynthetic solar cells is a promising method to address the energy intensive depolymerization of lignin for the production of biofuels and valuable chemicals. This feature article gives an in-depth overview of recent progress using dye-sensitized photoelectrosynthetic solar cells (DSPECs) to initiate the cleavage of C-C/C-O bonds in lignin and related model compounds. This approach takes advantage of N-oxyl mediated catalysis in organic electrolytes and presents a promising direction for the sustainable production of chemicals currently derived from fossil fuels.

Theoretical Exploration of Energy Transfer and Single Electron Transfer Mechanisms to Understand the Generation of Triplet Nitrene and the C(sp3)-H Amidation with Photocatalysts

Mechanistic explorations and kinetic evaluations were performed based on electronic structure calculations at the CASPT2//CASSCF level of theory, the Fermi's golden rule combined with the Dexter model, and the Marcus theory to unveil the key factors regulating the processes of photocatalytic C(sp³)-H amidation starting from the newly emerged nitrene precursor of hydroxamates. The highly reactive nitrene was found to be generated efficiently via a triplet-triplet energy transfer process and to be benefited from the advantages of hydroxamates with long-range charge-transfer (CT) excitation from the N-centered lone pair to the 3,5-bis(trifluoromethyl)benzoyl group. The properties of the metal-to-ligand charge-transfer (MLCT) state of photocatalysts, the functionalization of chemical moieties for substrates involved in the charge-transfer (CT) excitation, such as the electron-withdrawing trifluoromethyl group, and the energetic levels of singlet and triplet reaction pathways may regulate the reaction yield of C(sp³)-H amidation. Kinetic evaluations show that the triplet-triplet energy transfer is the main driving force of the reaction rather than the single electron transfer process. The effects of electronic coupling, molecular rigidity, and excitation energies on the energy transfer efficiency were further discussed. Finally, we investigated the inverted behavior of single-electron transfer, which is correlated unfavorably to the catalytic efficiency and amidation reaction. All theoretical explorations allow us to better understand the generation of nitrene with visible-light photocatalysts, to expand highly efficient substrate sources, and to broaden our scope of available photosensitizers for various cross-coupling reactions and the construction of N-heterocycles.

A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency

Lignin is a promising alternative to traditional fossil resources for producing biofuels due to its aromaticity and renewability. Pyrolysis is an efficient technology to convert lignin to valuable chemicals, which is beneficial for improving lignin valorization. In this review, pyrolytic behaviors of various lignin were included, as well as the pyrolytic mechanism consisting of initial, primary, and charring stages were also introduced. Several parallel reactions, such as demethoxylation, demethylation, decarboxylation, and decarbonylation of lignin side chains to form light gases, major lignin structure decomposition to generate phenolic compounds, and polymerization of active lignin intermediates to yield char, can be observed through the whole pyrolysis process. Several parameters, such as pyrolytic temperature, time, lignin type, and functional groups (hydroxyl, methoxy), were also investigated to figure out their effects on lignin pyrolysis. On the other hand, zeolite-driven lignin catalytic pyrolysis and lignin co-pyrolysis with other hydrogen-rich co-feedings were also introduced for improving process efficiency to produce more aromatic hydrocarbons (AHs). During the pyrolysis process, phenolic compounds and/or AHs can be produced, showing promising applications in biochemical intermediates and biofuel additives. Finally, some challenges and future perspectives for lignin pyrolysis have been discussed.

Waste Biomass Selective and Sustainable Photooxidation to High-Added-Value Products: A Review

Researchers worldwide seek to develop convenient, green, and ecological production processes to synthesize chemical products with high added value. In this sense, lignocellulosic biomass photocatalysis is an excellent process for obtaining various outcomes for the industry. One issue of biomass transformation via heterogeneous catalysis into valuable chemicals is the selection of an adequate catalyst that ensures high conversion and selectivity at low costs. Titanium oxide (TiO2), is widely used for several applications, including photocatalytic biomass degradation, depolymerization, and transformation. Graphite carbon nitride (g-C3N4) is a metal-free polymeric semiconductor with high oxidation and temperature resistance and there is a recent interest in developing this catalyst. Both catalysts are amenable to industrial production, relatively easy to dope, and suited for solar light absorption. Recent investigations also show the advantages of using heterojunctions, for biomass derivates production, due to their better solar spectrum absorption properties and, thus, higher efficiency, conversion, and selectivity over a broader spectrum. This work summarizes recent studies that maximize selectivity and conversion of biomass using photocatalysts based on TiO2 and g-C3N4 as supports, as well as the advantages of using metals, heterojunctions, and macromolecules in converting cellulose and lignin. The results presented show that heterogeneous photocatalysis is an interesting technology for obtaining several chemicals of industrial use, especially when using TiO2 and g-C3N4 doped with metals, heterojunctions, and macromolecules because these modified catalysts permit higher conversion and selectivity, milder reaction conditions, and reduced cost due to solar light utilization. In order to apply these technologies, it is essential to adopt government policies that promote the use of photocatalysts in the industry, in addition to encouraging active collaboration between photooxidation research groups and companies that process lignocellulosic biomass.

1,2-Radical Shifts in Photoinduced Synthetic Organic Transformations: A Guide to the Reactivity of Useful Radical Synthons

The exploration of 1,2-radical shift (RS) mechanisms in photoinduced organic reactions has provided efficient routes for the generation of important radical synthons in many chemical transformations. In this Review, the basic concepts involved in the traditional 1,2-spin-center shift (SCS) mechanisms in recently reported studies are discussed. In addition, other useful 1,2-RSs are addressed, such as those proceeding through 1,2-group migrations in carbohydrate chemistry, via 1,2-boron shifts, and by the generation of α-amino radicals. The discussion begins with a general overview of the basic aspects of 1,2-RS mechanisms, followed by a demonstration of their applicability in photoinduced transformations. The sections that follow are organized according to the mechanisms operating in combination with the 1,2-radical migration event. This contribution is not a comprehensive review but rather aims to provide an understanding of the topic, focused on the more recent advances in the field, and establishes a definition for the nomenclature that has been used to describe such mechanisms.

Photocatalytic Reforming of Biomass: What Role Will the Technology Play in Future Energy Systems

Photocatalytic reforming of biomass has emerged as an area of significant interest within the last decade. The number of papers published in the literature has been steadily increasing with keywords such as 'hydrogen' and 'visible' becoming prominent research topics. There are likely two primary drivers behind this, the first of which is that biomass represents a more sustainable photocatalytic feedstock for reforming to value-added products and energy. The second is the transition towards achieving net zero emission targets, which has increased focus on the development of technologies that could play a role in future energy systems. Therefore, this review provides a perspective on not only the current state of the research but also a future outlook on the potential roadmap for photocatalytic reforming of biomass. Producing energy via photocatalytic biomass reforming is very desirable due to the ambient operating conditions and potential to utilise renewable energy (e.g., solar) with a wide variety of biomass resources. As both interest and development within this field continues to grow, however, there are challenges being identified that are paramount to further advancement. In reviewing both the literature and trajectory of the field, research priorities can be identified and utilised to facilitate fundamental research alongside whole systems evaluation. Moreover, this would underpin the enhancement of photocatalytic technology with a view towards improving the technology readiness level and promoting engagement between academia and industry.

Application of the Spin-Center Shift in Organic Synthesis

Spin-center shift (SCS) is a radical process involving 1,2-radical translocation along with a two-electron ionic movement, such as elimination of an adjacent leaving group. Such a process was initially observed in some important biochemical transformations, and the unique property has also attracted considerable interest in synthetic chemistry. Experimental, kinetic, as well as computational studies have been performed, and a series of useful radical transformations have been developed and applied in organic synthesis based on SCS processes in the last 20 years. This Perspective is an overview of radical transformations involving the SCS mechanism.

Skeletal Ni electrode-catalyzed C-O cleavage of diaryl ethers entails direct elimination via benzyne intermediates

Diaryl ethers undergo electrocatalytic hydrogenolysis (ECH) over skeletal Ni cathodes in a mild, aqueous process that achieves direct C-O cleavage without initial benzene ring saturation. Mechanistic studies find that aryl phenyl ethers with a single para or meta functional group (methyl, methoxy, or hydroxy) are selectively cleaved to the substituted benzene and phenol, in contrast to recently reported homogeneous catalytic cleavage processes. Ortho positioning of substituents reverses this C-O bond selectivity, except for the 2-phenoxyphenol case. Together with isotope labeling and co-solvent studies, these results point to two distinct cleavage mechanisms: (a) dual-ring coordination and C-H activation, leading to vicinal elimination to form phenol and a surface-bound aryne intermediate which is then hydrogenated and released as the arene; and (b) surface binding in keto form by the phenolic ring of the hydroxy-substituted substrates, followed by direct displacement of the departing phenol. Notably, acetone inhibits the well-known reduction of phenol to cyclohexanol, affording control of product ring saturation. A byproduct of this work is the discovery that the ECH treatment completely defluorinates substrates bearing aromatic C-F and C-CF₃ groupings.

Biomass conversion holds promise as a more sustainable source of platform chemicals, but limitations in the ways in which lignin can be broken down is a current bottleneck. Here the authors report an electrocatalytic hydrogenolysis over skeletal Ni that cleaves diaryl ethers, chemically resistant moieties in both renewable carbon sources and persistent organic pollutants.

Enhanced Photocatalytic Alcohol Oxidation at the Interface of RuC-Coated TiO2 Nanorod Arrays

Visible-light-driven organic oxidations carried out under mild conditions offer a sustainable approach to performing chemical transformations important to the chemical industry. This work reports an efficient photocatalytic benzyl alcohol oxidation process using one-dimensional (1D) TiO2 nanorod (NR)-based photoanodes with surface-adsorbed ruthenium polypyridyl photocatalysts at room temperature. The photocatalyst bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine)Ru(II) (RuC) was covalently anchored onto TiO2 nanorod arrays grown on fluorine-doped tin oxide (FTO) electrode surfaces (FTO|t-TiO2|RuC, t = the thickness of TiO2 NR). Under aerobic conditions, the photophysical and photocatalytic properties of FTO|t-TiO2|RuC (t = 1, 2, or 3.5 μm) photoanodes were investigated in a solution containing a hydrogen atom transfer mediator (4-acetamido-2,2,6,6-tetramethylpiperidine-N-oxyl, ACT) as cocatalyst. Dye-sensitized photoelectrochemical cells (DSPECs) using the FTO|t-TiO2|RuC (t = 1, 2, or 3.5 μm) photoanodes and ACT-containing electrolyte were investigated for carrying out photocatalytic oxidation of a lignin model compound containing a benzylic alcohol functional group. The best-performing anode surface, FTO|1-TiO2|RuC (shortest NR length), oxidized the 2° alcohol of the lignin model compound to the Cα-ketone form with a > 99% yield over a 4 h photocatalytic experiment with a Faradaic efficiency of 88%. The length of TiO2 NR arrays (TiO2 NRAs) on the FTO substrate influenced the photocatalytic performance with longer NRAs underperforming compared to the shorter arrays. The influence of the NR length is hypothesized to affect the homogeneity of the RuC coating and accessibility of the ACT mediator to the RuC-coated TiO2 surface. The efficient photocatalytic alcohol oxidation with visible light at room temperature as demonstrated in this study is important to the development of sustainable approaches for lignin depolymerization and biomass conversion.

Promising and efficient lignin degradation versatile strategy based on DFT calculations

The extraction of higher-value products from lignin degradations under mild conditions is a challenge. Previous research reported efficient two-step oxidation and reduction strategies for lignin degradation, which has great significance to lignin degradation. In this paper, the mechanism about the C-O bond cleavage of lignin with and without Cα oxidations has been studied systematically. Our calculation results show that the degradation of anionized lignin with Cα oxidations is kinetically and thermodynamically feasible. In addition, the calculations predict that the anionized lignin compounds without Cα oxidation also could be degraded under mild conditions. Moreover, we propose special lignin catalytic degradation systems containing the characteristic structure of "double hydrogen bonds." The double hydrogen bonds structure could further decrease the energy barriers of the C-O bond cleavage reaction. This provides a versatile strategy to design novel lignin degradation.

Radical generation and fate control for photocatalytic biomass conversion

Photocatalysis is an emerging approach for sustainable chemical production from renewable biomass under mild conditions. Active radicals are always generated as key intermediates, in which their high reactivity renders them versatile for various upgrading processes. However, controlling their reaction is a challenge, especially in highly functionalized biomass frameworks. In this Review, we summarize recent advanced photocatalytic systems for selective biomass valorization, with an emphasis on their distinct radical-mediated reaction patterns. The strategies for generating a specific radical intermediate and controlling its subsequent conversion towards desired chemicals are also highlighted, aiming to provide guidance for future studies. We believe that taking full advantage of the unique reactivity of radical intermediates would provide great opportunities to develop more efficient photocatalytic systems for biomass valorization.

Photophysics of Perylene Diimide Dianions and Their Application in Photoredox Catalysis

The two-electron reduced forms of perylene diimides (PDIs) are luminescent closed-shell species whose photochemical properties seem underexplored. Our proof-of-concept study demonstrates that straightforward (single) excitation of PDI dianions with green photons provides an excited state that is similarly or more reducing than the much shorter-lived excited states of PDI radical monoanions, which are typically accessible after biphotonic excitation with blue photons. Thermodynamically demanding photocatalytic reductive dehalogenations and reductive C-O bond cleavage reactions of lignin model compounds have been performed using sodium dithionite acts as a reductant, either in aqueous solution or in biphasic water-acetonitrile mixtures in the presence of a phase transfer reagent. Our work illustrates the concept of multi-electron reduction of a photocatalyst by a sacrificial reagent prior to irradiation with low-energy photons as a means of generating very reactive excited states.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Photochemical and Electrochemical Applications of Proton-Coupled Electron Transfer in Organic Synthesis

We present here a review of the photochemical and electrochemical applications of multi-site proton-coupled electron transfer (MS-PCET) in organic synthesis. MS-PCETs are redox mechanisms in which both an electron and a proton are exchanged together, often in a concerted elementary step. As such, MS-PCET can function as a non-classical mechanism for homolytic bond activation, providing opportunities to generate synthetically useful free radical intermediates directly from a wide variety of common organic functional groups. We present an introduction to MS-PCET and a practitioner's guide to reaction design, with an emphasis on the unique energetic and selectivity features that are characteristic of this reaction class. We then present chapters on oxidative N-H, O-H, S-H, and C-H bond homolysis methods, for the generation of the corresponding neutral radical species. Then, chapters for reductive PCET activations involving carbonyl, imine, other X═Y π-systems, and heteroarenes, where neutral ketyl, α-amino, and heteroarene-derived radicals can be generated. Finally, we present chapters on the applications of MS-PCET in asymmetric catalysis and in materials and device applications. Within each chapter, we subdivide by the functional group undergoing homolysis, and thereafter by the type of transformation being promoted. Methods published prior to the end of December 2020 are presented.

High Triplet Energy Iridium(III) Isocyanoborato Complex for Photochemical Upconversion, Photoredox and Energy Transfer Catalysis

Cyclometalated Ir(III) complexes are often chosen as catalysts for challenging photoredox and triplet-triplet-energy-transfer (TTET) catalyzed reactions, and they are of interest for upconversion into the ultraviolet spectral range. However, the triplet energies of commonly employed Ir(III) photosensitizers are typically limited to values around 2.5-2.75 eV. Here, we report on a new Ir(III) luminophore, with an unusually high triplet energy near 3.0 eV owing to the modification of a previously reported Ir(III) complex with isocyanoborato ligands. Compared to a nonborylated cyanido precursor complex, the introduction of B(C₆F₅)₃ units in the second coordination sphere results in substantially improved photophysical properties, in particular a high luminescence quantum yield (0.87) and a long excited-state lifetime (13.0 μs), in addition to the high triplet energy. These favorable properties (including good long-term photostability) facilitate exceptionally challenging organic triplet photoreactions and (sensitized) triplet-triplet annihilation upconversion to a fluorescent singlet excited state beyond 4 eV, unusually deep in the ultraviolet region. The new Ir(III) complex photocatalyzes a sigmatropic shift and [2 + 2] cycloaddition reactions that are unattainable with common transition metal-based photosensitizers. In the presence of a sacrificial electron donor, it furthermore is applicable to demanding photoreductions, including dehalogenations, detosylations, and the degradation of a lignin model substrate. Our study demonstrates how rational ligand design of transition-metal complexes (including underexplored second coordination sphere effects) can be used to enhance their photophysical properties and thereby broaden their application potential in solar energy conversion and synthetic photochemistry.

Photocatalytic degradation of lignin by low content g-C3N4 modified TiO2 under visible light

TiO2/g-C3N4 photocatalysts efficiently degraded lignin to obtain small molecule aromatics, which facilitated the efficient utilization of biomass.

Metal Sulfide Photocatalysts for Lignocellulose Valorization

Transition metal sulfides are an extraordinarily vital class of semiconductors with a wide range of applications in the photocatalytic field. A great number of recent advances in photocatalytic transformations of lignocellulosic biomass, the largest renewable carbon resource, into high-quality fuels and value-added chemicals has been achieved over metal sulfide semiconductors. Herein, the progress and breakthroughs in metal-sulfide-based photocatalytic systems for lignocellulose valorization with an emphasis on selective depolymerization of lignin and oxidative coupling of some important bioplatforms are highligted. The key issues that control reaction pathways and mechanisms are carefully examined. The functions of metal sulfides in the elementary reactions, including CO-bond cleavage, selective oxidations, CC coupling, and CH activation, are discussed to offer insights to guide the rational design of active and selective photocatalysts for sustainable chemistry. The prospects of sulfide photocatalysts in biomass valorization are also analyzed and briefly discussed.