A Homochiral Metal–Organic Framework as an Effective Asymmetric Catalyst for Cyanohydrin Synthesis

Factors influencing the performance of organocatalysts immobilised on solid supports: A review

Organocatalysis has become a powerful tool in synthetic chemistry, providing a cost-effective alternative to traditional catalytic methods. The immobilisation of organocatalysts offers the potential to increase catalyst reusability and efficiency in organic reactions. This article reviews the key parameters that influence the effectiveness of immobilised organocatalysts, including the type of support, immobilisation techniques and the resulting interactions. In addition, the influence of these factors on catalytic activity, selectivity and recyclability is discussed, providing an insight into optimising the performance of immobilised organocatalysts for practical applications in organic chemistry.

Investigation of Enantioselectivity Using TADDOL Derivatives as Chiral Ligands in Asymmetric Cyanation Reactions

This study investigates the enantioselectivity challenges of asymmetric cyanation reactions using TADDOL derivatives as chiral ligands, specifically focusing on the cyanosilylation of aldehydes and the cyanation of imines. Despite extensive optimization efforts, the highest achieved ee was only modest, peaking at 71% for the cyanosilylation reaction, while the cyanation of imines consistently resulted in racemic mixtures. Our comprehensive analysis, supported by experimental data and computational modeling, reveals significant barriers to enhancing the enantioselectivity. The results highlight a complex interplay between ligand structure and reaction conditions, demonstrating that even promising ligands such as TADDOL derivatives face substantial challenges in these reaction types. This study underscores the importance of understanding the mechanistic details through computational insights to guide future improvements in asymmetric catalysis.

Quest for a Desolvated Structure Unveils Breathing Phenomena in a MOF Leading to Greener Catalysis in a Solventless Setup: Insights from Combined Experimental and Computational Studies

The crystal structure of the metal-organic framework (MOF), {Mn2(1,4-bdc)2(DMF)2}n (1) (1,4-bdcH2, 1,4-benzenedicarboxylic acid; DMF, N,N-dimethylformamide), is known for a long time; however, its desolvated structure, {Mn2(1,4-bdc)2}n (1'), is not yet known. The first-principles-based computational simulation was used to unveil the structure of 1' that shows the expansion in the framework, leading to pore opening after the removal of coordinated DMF molecules. We have used 1' that contains open metal sites (OMSs) in the structure in cyanosilylation and CO2 cycloaddition reactions and recorded complete conversions in a solventless setup. The pore opening in 1' allows the facile diffusion of small aldehyde molecules into the channels, leading to complete conversion. The reactions with larger aldehydes, 2-naphthaldehyde and 9-anthracenecarboxaldehyde, also show 99.9% conversions, which are the highest reported until date in solventless conditions. The in silico simulations illustrate that larger aldehydes interact with Mn(II) OMSs on the surfaces, enabling a closer interaction and facilitating complete conversions. The catalyst shows high recyclability, exhibiting 99.9% conversions in the successive reaction cycles with negligible change in the structure. Our investigations illustrate that the catalyst 1' is economical, efficient, and robust and allows reactions in a solventless greener setup, and therefore the catalysis with 1' can be regarded as "green catalysis".

Metal-Organic Layers with Photosensitizer and Pyridine Pairs Activate Alkyl Halides for Photocatalytic Heck-Type Coupling with Olefins

Photochemical generation of alkyl radicals from haloalkanes often requires strong energy input from ultraviolet light or a strong photoreductant. Haloalkanes can alternatively be activated with nitrogen-based nucleophiles through a sequential SN2 reaction and single-electron reduction to access alkyl radicals, but these two reaction steps have opposite steric requirements on the nucleophiles. Herein, we report the design of Hf12 metal-organic layers (MOLs) with iridium-based photosensitizer bridging ligands and secondary-building-unit-supported pyridines for photocatalytic alkyl radical generation from haloalkanes. By bringing the photosensitizer and pyridine pairs in proximity, the MOL catalysts allowed facile access to the pyridinium salts from SN2 reactions between haloalkanes and pyridines and at the same time enhanced electron transfer from excited photosensitizers to pyridinium salts to facilitate alkyl radical generation. Consequentially, the MOLs efficiently catalyzed Heck-type cross-coupling reactions between haloalkanes and olefinic substrates to generate functionalized alkenes. The MOLs showed 4.6 times higher catalytic efficiency than the homogeneous counterparts and were recycled and reused without a loss of catalytic activity.

Two pillared-layer metal-organic frameworks based on the pinwheel trinuclear carboxylate-clusters of Zn(II) and Co(II): synthesis, crystal structures, magnetic study, and Lewis acid catalysis

Using a dicarboxylic acid, [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂L1) and an exobidentate ligand, (1E,1'E)-N,N'-(1,4-phenylene)bis(1-(pyridin-4-yl)methanimine) (L2), two 3D interpenetrated networks, {[Zn₃(L1)₃(L2)]·9H₂O}_n (Zn-MOF) and {[Co₃(L1)₃(L2)(DMF)]·0.5DMF}_n (Co-MOF), have been prepared in good yields. The crystal structure analysis of Zn-MOF and Co-MOF revealed that both have a 3D pillared-layer structure based on pinwheel trinuclear metal-carboxylate clusters as secondary building units (SBUs). Furthermore, the structures also exhibited three-fold interpenetration. Although the overall networks in Zn-MOF and Co-MOF showed significant resemblances, there are marked differences in their crystal structures, which are associated with the coordination environment of the metal centre and the binding modes of the carboxylates. Gas adsorption studies (N₂ at 77 K and 1 bar) indicated that Co-MOF is more porous than Zn-MOF. Magnetic measurements on Co-MOF indicate a significant antiferromagnetic interaction (45 K to 303 K) between trimeric Co(II) S = 3/2 spins through syn-syn carboxylato bridges. Both MOFs were studied for the Lewis acid catalyzed Knoevenagel condensation reactions between benzaldehydes and malononitrile with an active methylene group, where Zn-MOF was found to be a better catalyst than Co-MOF. This was supported by the Monte Carlo simulations indicating the better substrate binding ability of Zn-MOF than Co-MOF.

Conformational Control of Organocatalyst in Strongly Brønsted-Acidic Metal-Organic Frameworks for Enantioselective Catalysis

Chiral imidodiphosphates (IDPs) have emerged as strong Brønsted acid catalysts for many enantioselective processes. However, the dynamic transformation between O,O-syn and O,O-anti conformers typically results in low enantioselectivity. Here we demonstrate that topologies of metal-organic frameworks (MOFs) can be exploited to control IDP conformations and local chiral microenvironments for enantioselective catalysis. Two porous Dy-MOFs with different topologies are obtained from an enantiopure 1,1'-biphenol IDP-based tetracarboxylate ligand. While the ligand adopts a 4- or 3-connected (c) binding mode, all IDPs are rigidified to get only a single O,O-syn conformation and display greatly enhanced Brønsted acidity relative to the free IDP. The MOF with the 4-c IDP that has a relatively less compact shape than the 3-c IDP can be an efficient and recyclable heterogeneous Brønsted acid catalysing the challenging asymmetric O,O-acetalization reaction with up to 96 % enantiomeric excess.

A review on chiral metal-organic frameworks: synthesis and asymmetric applications

Chiral metal-organic frameworks (CMOFs) have the characteristics of framework structure diversity and functional tunability, and have important applications in the fields of chiral identification, separation of enantiomers and asymmetric catalysis. In recent years, the application of CMOFs has also been extended to other research fields, such as circularly polarized fluorescence and chiral ferroelectrics. Compared with achiral MOFs, the design of CMOFs only considers the modes of introduction of chirality, and also takes into account the crystallization and purification. Therefore, the synthesis and characterization of CMOFs face many difficult challenges. This review discusses three effective strategies for constructing CMOFs, including direct synthesis of chiral ligands, spontaneous resolution of achiral ligands or chiral template-induced synthesis, and post-synthetic chiralization of achiral MOFs. In addition, this review also discusses the recent application progress of CMOFs in chiral molecular recognition, enantiomer separation, asymmetric catalysis, circularly polarized fluorescence, and chiral ferroelectrics.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

A Mixed Heterobimetallic Y/Eu-MOF for the Cyanosilylation and Hydroboration of Carbonyls

Herein, to the best of our knowledge, the first heterobimetallic Y/Eu porous metal–organic framework (MOF), based on 3-amino-4-hydroxybenzoic acid (H2L) ligand, with the following formulae {[Y3.5Eu1.5L6(OH)3(H2O)3]·12DMF}n (in advance, namely Y/Eu-MOF), is described. The three-dimensional structure has been synthesized by solvothermal routes and thoroughly characterized, by means of single crystal X-ray diffraction, powder X-ray diffraction, electronic microscopy, ICP-AES, electrophoretic mobility, and FTIR spectra. Intriguingly, the porous nature allows for coordinated solvent molecules displacement, yielding unsaturated metal centers, which can act as a Lewis acid catalyst. This novel supramolecular entity has been tested in cyanosilylation and hydroboration reactions on carbonyl substrates of a diverse nature, exhibiting an extraordinary activity.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Asymmetric Cyanosilylation of Aldehydes by a Lewis Acid/Base Synergistic Catalyst of Chiral Metal Clusters

Metal clusters with well-defined crystal structures are extremely useful for studying the synergistic catalytic effects and associated catalytic mechanisms. In this study, two pairs of chiral lanthanide-transition metal clusters (R)/(S)-Co₃Ln₂ (Ln = Tb or Dy) were synthesized using Schiff-base ligands [(R)- or (S)-H₃L] with multiple Lewis base sites (O sites). The as-prepared (R)/(S)-Co₃Ln₂ chiral metal clusters exhibited good catalytic functionality in the asymmetric synthesis of chiral cyanohydrins, with high conversions of up to 99% and medium-to-high enantiomeric excess values of up to 78%. The catalysis process followed a mechanism in which the bifunctional metal clusters of (R)/(S)-Co₃Ln₂, containing Lewis acid sites and Lewis base sites, simultaneously activated the aldehydes and trimethylsilyl cyanide, respectively. Consequently, synergistic catalysis was realized. The enantioselectivity of the different aldehydes and stereochemical configuration of the resulting products are attributed to the formation of a steric chiral pocket via the external chiral ligands on the clusters. In addition, heterogeneous asymmetric cyanosilylation using (R)/(S)-Co₃Ln₂ chiral metal clusters achieved high chemoselectivity and regioselectivity under mild conditions.

Chemoselective and Tandem Reduction of Arenes Using a Metal-Organic Framework-Supported Single-Site Cobalt Catalyst

The development of heterogeneous, chemoselective, and tandem catalytic systems using abundant metals is vital for the sustainable synthesis of fine and commodity chemicals. We report a robust and recyclable single-site cobalt-hydride catalyst based on a porous aluminum metal-organic framework (DUT-5 MOF) for chemoselective hydrogenation of arenes. The DUT-5 node-supported cobalt(II) hydride (DUT-5-CoH) is a versatile solid catalyst for chemoselective hydrogenation of a range of nonpolar and polar arenes, including heteroarenes such as pyridines, quinolines, isoquinolines, indoles, and furans to afford cycloalkanes and saturated heterocycles in excellent yields. DUT-5-CoH exhibited excellent functional group tolerance and could be reusable at least five times without decreased activity. The same MOF-Co catalyst was also efficient for tandem hydrogenation-hydrodeoxygenation of aryl carbonyl compounds, including biomass-derived platform molecules such as furfural and hydroxymethylfurfural to cycloalkanes. In the case of hydrogenation of cumene, our spectroscopic, kinetic, and density functional theory (DFT) studies suggest the insertion of a trisubstituted alkene intermediate into the Co-H bond occurring in the turnover limiting step. Our work highlights the potential of MOF-supported single-site base-metal catalysts for sustainable and environment-friendly industrial production of chemicals and biofuels.

Smart Metal-Organic Frameworks for Biotechnological Applications: A Mini-Review

In this pandemic situation it is evident that viruses and bacteria, more specifically, multiple drug resistant (MDR) bacteria, endanger human civilization severely. It is high time to design smart weapons to combat these pathogens for the prevention and cure of allied ailments. Metal-organic frameworks (MOFs) are porous materials designed from metal ions or inorganic clusters and multidentate organic ligands. Due to some unique features like high porosity, tunable pore shape and size, numerous possible metal-ligand combinations, etc., MOFs are ideal candidates to design "smart biotechnological tools". MOFs construct promising fluorescence based biosensing platforms for detection of viruses. MOFs also exhibit excellent antibacterial activity due to their ability for sustained release of active biocidal agents. There are several reviews that summarize the antibacterial applications of MOFs, but the biosensing platforms based on MOFs for detection of viruses have scarcely been summarized. This review carefully covers both the aspects including virus detection (nucleic acid recognition and immunological detection) with underlying mechanisms as well as antibacterial application of MOFs and doped MOFs or composites. This review will deliver valuable information and references for designing new, smarter antimicrobial agents based on MOFs.

Differentiation of Epoxide Enantiomers in the Confined Spaces of an Homochiral Cu(II) Metal-Organic Framework by Kinetic Resolution

TAMOF-1, a homochiral metal-organic framework (MOF) constructed from an amino acid derivative and Cu(II), was investigated as a heterogeneous catalyst in kinetic resolutions involving the ring opening of styrene oxide with a set of anilines. The branched products generated from the ring opening of styrene oxide with anilines and the unreacted epoxide were obtained with moderately high enantiomeric excesses. The linear product arising from the attack on the non-benzylic position of styrene oxide underwent a second kinetic resolution by reacting with the epoxide, resulting in an amplification of its final enantiomeric excess and a concomitant formation of an array of isomeric aminodiols. Computational studies confirmed the experimental results, providing a deep understanding of the whole process involving the two successive kinetic resolutions. Furthermore, TAMOF-1 activity was conserved after several catalytic cycles. The ring opening of a meso-epoxide with aniline catalyzed by TAMOF-1 was also studied and moderate enantioselectivities were obtained.

Catalysis in Single Crystalline Materials: From Discrete Molecules to Metal-Organic Frameworks

Catalysis is one of the key techniques for people's modern life. It has created numerous essential chemicals such as biomedicines, agricultural chemicals and unique materials. Heterogeneous catalysis is the new emerging method with reusable catalysts. Among heterogenous catalysis patterns developed so far, single crystalline catalysis has become the promising one owing to its high catalytic density and selectivity resulted by the inherent porosity, orderliness of the lattices and permeability. These crystalline catalysts could be used in various reactions such as photo-dimerization, Diels-Alder reaction, CO₂ transformation and so on. In this review, we highlighted the reported works about the single crystalline catalysts. Both discrete small molecules and metal-organic frameworks (MOFs) have been used to prepare single crystals for catalysis. For discrete molecules based crystalline catalysts, coordinated and covalent molecules have been used. There were more catalytic modes in crystalline MOF catalysts. Three patterns were identified in this review: single crystalline MOFs i) without catalytic sites, ii) with inherent catalytic features and iii) with introducing catalytic units by post synthetic modification. Based on these examples, this review committed to provide the inspirations for the further design and application of single crystalline materials.

Chiral and robust Zr(IV)-based metal-organic frameworks built from spiro skeletons

Chiral metal-organic frameworks (CMOFs) have emerged as an important subclass of chiral materials; however, their development is hindered substantially by limited enantiopure functional linkers and poor chemical stabilities. Here we report the design and synthesis of a total of five enantiopure spiro-based tetracarboxylate linkers with diverse functionalities and their use in connecting Zr₆ clusters to form an array of highly robust and porous CMOFs. X-ray crystallographic analysis and structure examination unambiguously revealed that the resulting CMOFs possess multifarious three-dimensional networks with novel topologies and pore systems, highlighting the great potential of chiral spiro skeletons in the fabrication of intriguing structures. PXRD and N₂ adsorption experiments validated their exceptional chemical stability towards boiling water as well as aqueous acid and base solutions. Moreover, their potential applications in enantioselective catalysis and separation are also presented.

Efficient C2H2/CO2 Separation in Ultramicroporous Metal-Organic Frameworks with Record C2H2 Storage Density

Physical separation of C₂H₂ from CO₂ on metal-organic frameworks (MOFs) has received substantial research interest due to the advantages of simplicity, security, and energy efficiency. However, that C₂H₂ and CO₂ exhibit very close physical properties makes their separation exceptionally challenging. Previous work appeared to mostly focused on introducing open metal sites that aims to enhance the C₂H₂ affinity at desired sites, whereas the reticular manipulation of organic components has rarely been investigated. In this work, by reticulating preselected amino and hydroxy functionalities into isostructural ultramicroporous chiral MOFs-Ni₂(l-asp)₂(bpy) (MOF-NH₂) and Ni₂(l-mal)₂(bpy) (MOF-OH)-we targeted efficient C₂H₂ uptake and C₂H₂/CO₂ separation, which outperforms most benchmark materials. Explicitly, MOF-OH adsorbs substantial amount of C₂H₂ with record storage density of 0.81 g mL^-1 at ambient conditions, which even exceeds the solid density of C₂H₂ at 189 K. In addition, MOF-OH gave IAST selectivity of 25 toward equimolar mixture of C₂H₂/CO₂, which is nearly twice higher than that of MOF-NH₂. Notably, the adsorption enthalpies for C₂H₂ at zero converge in both MOFs are remarkably low (17.5 kJ mol^-1 for MOF-OH and 16.7 kJ mol^-1 for MOF-NH₂), which to our knowledge are the lowest among efficient rigid C₂H₂ sorbents. The efficiencies of both MOFs for the separation of C₂H₂/CO₂ are validated by multicycle breakthrough experiments. DFT calculations provide molecular-level insight over the adsorption/separation mechanism. Moreover, MOF-OH can survive in boiling water for at least 1 week and can be easily scaled up to kilograms eco-friendly and economically, which is very crucial for potential industrial implementation.

Metal-Organic Framework-Confined Single-Site Base-Metal Catalyst for Chemoselective Hydrodeoxygenation of Carbonyls and Alcohols

Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H₂. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl₂ followed by the reaction of NaEt₃BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of Co^II and Al^III centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H₂ allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.

Advances in Chiral Metal-Organic and Covalent Organic Frameworks for Asymmetric Catalysis

Asymmetric catalysis is of crucial importance owing to the huge and rising demand for optically pure substances. Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), as two emerging crystalline porous materials, have presented great promising applications for heterogeneous asymmetric catalysis. The unique properties, such as, highly regular porous structures, prominent structural tunability, and well-ordered catalytic sites, render chiral MOFs (CMOFs) and chiral COFs (CCOFs) highly active and enantioselective for a large number of asymmetric catalytic organic transformations. Furthermore, they provide a useful platform for facile mechanistic understanding and catalyst design. This review provides an overview of the advancements in CMOFs and CCOFs for asymmetric catalysis. The designs, syntheses and structures of these crystalline porous materials, and their asymmetric catalytic performance are described. And the perspectives on challenges and opportunities in development of CMOFs and CCOFs are discussed. It is anticipated that this review will shed light on the heterogeneous asymmetric catalysis with CMOFs and CCOFs and motivate further research in this promising field.

Merging N-Hydroxyphthalimide into Metal-Organic Frameworks for Highly Efficient and Environmentally Benign Aerobic Oxidation

Two highly efficient metal-organic framework catalysts TJU-68-NHPI and TJU-68-NDHPI have been successfully synthesized through solvothermal reactions of which the frameworks are merged with N-hydroxyphthalimide (NHPI) units, resulting in the decoration of pore surfaces with highly active nitroxyl catalytic sites. When t-butyl nitrite (TBN) is used as co-catalyst, the as-synthesized MOFs are demonstrated to be highly efficient and recyclable catalysts for a novel three-phase heterogeneous oxidation of activated C-H bond of primary and secondary alcohols, and benzyl compounds under mild conditions. Based on the high efficiency and selectivity, an environmentally benign system with good sustainability, mild conditions, simple work-up procedure has been established for practical oxidation of a wide range of substrates.

Triptycene-based Chiral Porous Polyimides for Enantioselective Membrane Separation

Enantiomers of 2, 6-diaminotriptycene (R, R-1 and S, S-1) are split by chiral-phase HPLC and their absolute configurations are identified by single-crystal X-ray diffraction technology. Using the enantiomers as monomers, a couple of chiral porous polyimides (R-FTPI and S-FTPI) are prepared by polycondensation reactions and display good heat stability, high BET surface area and good solubility in organic solvents. Moreover, both of R-FTPI and S-FTPI can be cast into robust, free-standing films suitable for enantioselective separation with symmetrical chiral selectivity.

Metal-organic frameworks as catalytic selectivity regulators for organic transformations

Selective organic transformations using metal-organic frameworks (MOFs) and MOF-based heterogeneous catalysts have been an intriguing but challenging research topic in both the chemistry and materials communities. Analogous to the reaction specificity achieved in enzyme pockets, MOFs are also powerful platforms for regulating the catalytic selectivity via engineering their catalytic microenvironments, such as metal node alternation, ligand functionalization, pore decoration, topology variation and others. In this review, we provide a comprehensive introduction and discussion about the role of MOFs played in regulating and even boosting the size-, shape-, chemo-, regio- and more appealing stereo-selectivity in organic transformations. We hope that it will be instructive for researchers in this field to rationally design, conveniently prepare and elaborately functionalize MOFs or MOF-based composites for the synthesis of high value-added organic chemicals with significantly improved selectivity.

Amino Acid-Functionalized Metal-Organic Frameworks for Asymmetric Base-Metal Catalysis

We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.

Homochiral metal-organic frameworks for enantioseparation

Obtaining homochiral compounds is of high importance to human health and environmental sustainability. Currently, enantioseparation is one of the most effective approaches to obtain homochiral compounds. Thanks to their controlled synthesis and high efficiency, homochiral metal-organic frameworks (HMOFs) are one of the most widely studied porous materials to enable enantioseparation. In this review, we discuss the chiral pocket model in depth as the key to unlock enantioselective separation mechanisms in HMOFs. In particular, we classify our discussion of these chiral pockets (also regarded as "molecular traps") into: (a) achiral/chiral linker based helical channels as a result of packing modality; and (b) chiral pores inherited from chiral ligands. Driven by a number of mechanisms of enantioseparation, conceptual advances have been recently made in the design of HMOFs for achieving high enantioseparation performances. Herein, these are systematically categorised and discussed. Further we elucidate various applications of HMOFs as regards enantioseparation, systematically classifying them into their use for purification and related analytical utility according to the reported examples. Last but not the least, we discuss the challenges and perspectives concerning the rational design of HMOFs and their corresponding enantioseparations.

Topology-Based Functionalization of Robust Chiral Zr-Based Metal-Organic Frameworks for Catalytic Enantioselective Hydrogenation

The design and development of robust and porous supported catalysts with high activity and selectivity is extremely significant but very challenging for eco-friendly synthesis of fine chemicals and pharmaceuticals. We report here the design and synthesis of highly stable chiral Zr(IV)-based MOFs with different topologies to support Ir complexes and demonstrate their network structures-dependent asymmetric catalytic performance. Guided by the modulated synthesis and isoreticular expansion strategy, five chiral Zr-MOFs with a flu or ith topology are constructed from enantiopure 1,1'-biphenol-derived tetracarboxylate linkers and Zr₆, Zr₉, or Zr₁₂ clusters. The obtained MOFs all show high chemical stability in boiling water, strongly acidic, and weakly basic aqueous solutions. The two flu MOFs featuring the dihydroxyl groups of biphenol in open and large cages, after sequential postsynthetic modification with P(NMe₂)₃ and [Ir(COD)Cl]₂, can be highly efficient and recyclable heterogeneous catalysts for hydrogenation of α-dehydroamino acid esters with up to 98% ee, whereas the three ith MOFs featuring the dihydroxyl groups in small cages cannot be installed with P(NMe₂)₃ to support the Ir complex. Incorporation of Ir-phosphorus catalysts into Zr-MOFs leads to great enhancement of their chemical stability, durability, and even stereoselectivity. This work therefore not only advances Zr-MOFs as stable supports for labile metal catalysts for heterogeneous asymmetric catalysis but also provides a new insight into how highly active chiral centers can result due to the framework topology.

Polycrystalline Advanced Microporous Framework Membranes for Efficient Separation of Small Molecules and Ions

Advanced porous framework membranes with excellent selectivity and high permeability of small molecules and ions are highly desirable for many important industrial separation applications. There has been significant progress in the fabrication of polycrystalline microporous framework membranes (PMFMs) in recent years, such as metal-organic framework and covalent organic framework membranes. These membranes possess small pore sizes, which are comparable to the kinetic diameter of small molecules and ions on the angstrom scale, very low thickness, down to tens to hundreds of nanometers, highly oriented crystalline structures, hybrid membrane structures, and specific functional groups for enhancing membrane selectivity and permeability. Recent advances in the fabrication methods of advanced PMFMs are summarized. Following this, four emerging separation applications of these advanced microporous framework membranes, including gas separation, water desalination, ion separation, and chiral separation, are highlighted and discussed in detail. Finally, a summary and some perspectives of future developments and challenges in this exciting research field are presented.

Temperature-induced solid-to-solid transformation in helical homochiral coordination polymers

The reactions of (R)- and (S)-4-(1-carboxyethoxy)benzoic acid (H₂CBA) with 1,3-bis(2-methyl-1H-imidazol-1-yl)benzene (1,3-BMIB) ligands afforded a pair of homochiral coordination polymers (CPs), namely, poly[[[μ-1,3-bis(2-methyl-1H-imidazol-1-yl)benzene][μ-(S)-4-(1-carboxylatoethoxy)benzoato]zinc(II)] monohydrate], {[Zn(C₁₀H₈O₅)(C₁₄H₁₄N₄)]·H₂O}_n or {[Zn{(S)-CBA}(1,3-BMIB)]·H₂O}_n (1-L), and poly[[[μ-1,3-bis(2-methyl-1H-imidazol-1-yl)benzene][μ-(R)-4-(1-carboxylatoethoxy)benzoato]zinc(II)] monohydrate] (1-D). Three kinds of helical chains exist in compounds 1-D and 1-L, which are constructed from Zn^II atoms, 1,3-BMIB ligands and/or CBA^2- ligands. When the as-synthesized crystals of 1-L and 1-D were further heated in the mother liquor or air, poly[[μ-1,3-bis(2-methyl-1H-imidazol-1-yl)benzene][μ-(S)-4-(1-carboxylatoethoxy)benzoato]zinc(II)], [Zn(C₁₀H₈O₅)(C₁₄H₁₄N₄)]_n or [Zn{(S)-CBA}(1,3-BMIB)]_n (2-L), and poly[[μ-1,3-bis(2-methyl-1H-imidazol-1-yl)benzene][μ-(R)-4-(1-carboxylatoethoxy)benzoato]zinc(II)] (2-D) were obtained, respectively. The single-crystal structure analysis revealed that 2-L and 2-D only contained one type of helical chain formed by Zn^II atoms and 1,3-BMIB and CBA^2- ligands, which indicated that the helical chains were reconstructed though solid-to-solid transformation. This result not only means the realization of helical transformation, but also gives a feasible strategy to build homochiral CPs.

The construction of a multifunctional metal–organic framework for targeting tumors and bioimaging

A simple one-pot process has been developed for the synthesis of multifunctional MOFs for targeting tumors and bioimaging.

Synthesis and photocatalytic activities of two homochiral metal–organic frameworks with cages and hydrogen bonding helices

Two homochiral metal–organic frameworks with M₃L₂ cages exhibit interesting hydrogen bonding helices and excellent photocatalytic activity.

MOF nanoparticles with encapsulated dihydroartemisinin as a controlled drug delivery system for enhanced cancer therapy and mechanism analysis

Schematic illustration of (a) the preparation of DHA@ZIF-8 NPs and (b) their application for cancer therapy.

Boosting Enantioselectivity of Chiral Organocatalysts with Ultrathin Two-Dimensional Metal-Organic Framework Nanosheets

The development of methodologies for inducing and tailoring enantioselectivities of catalysts is an important issue in asymmetric catalysis. In this work, we demonstrate for the first time that chiral molecular catalysts can be boosted from completely nonselective to highly enantioselective when installed in nanostructured metal-organic frameworks (MOFs). Exfoliation of layered crystals is one of the most direct synthetic routes to unltrathin nanosheets, but its use in MOFs is limited by the availability of layered MOFs. We illustrate that layered MOFs can be designed using ligand-capped metal clusters and angular organic linkers. This leads to the synthesis of two three-dimensional (3D) layered porous MOFs from Zn₄-p-tert-butylsulfonyl calix[4]arene and chiral angular 1,1'-binaphthol/-biphenol dicarboxylic acids, which can be ultrasonic exfoliated into one- and two-layer nanosheets. The obtained MOF materials are efficient catalysts for asymmetric cascade condensation and cyclization of 2-aminobenzamide and aldehydes to produce 2,3-dihyroquinazolinones. While both binaphthol and biphenol display no enantioselectivity, restriction of their freedom in the MOFs leads to 56-90% and 46-72% ee, respectively, which are increased to 72-94% and 64-82% ee after exposure to external surfaces of the flexible nanosheets. Moreover, the MOF crystals and nanosheets exhibit highly sensitive fluorescent enhancement in the presence of chiral amino alcohols with enantioselectivity factors being, respectively, increased up to 1.4 and 2.3 times of the values of the diols, allowing them to be utilized in chiral sensing. Therefore, the observed enantioselectivities increase in the order organocatalyst < MOF crystals < MOF nanosheets in both catalysis and sensing. This work not only provides a strategy to make 3D layered MOFs and their untrathin nanosheets but also paves the way to utilize nanostructured MOFs to manipulate enantioselectivities of molecular catalysts.