Size-Controlled Nanoparticle-Guided Assembly of Block Copolymers for Convex Lens-Shaped Particles

Two-Regime Conformation of Grafted Polymer on Nanoparticle Determines Symmetry of Nanoparticle Self-Assembly

One of the key design factors that regulate the properties of grafted nanoparticles (GNPs) and their self-assembly is the conformation of the grafted polymer. On the curved surface of the GNP core, the conformation of the polymer chain is not uniform in the radial direction. The segment is a non-Gaussian chain in the concentrated polymer brush (CPB) regime near the interface between GNP core and grafted polymer, while it is less constrained in the semidilute polymer brush (SDPB) regime near the surface of GNP. Here, the property of polymer conformation showing crossover behavior at the CPB/SDPB threshold through the coarse-grain molecular dynamics simulation of nanoparticles with explicit grafted chains is explored. Moreover, the self-assembly structure depends on the effective softness, which is defined as a function of the threshold of two regimes estimated from the conformation of the polymer.

Well-Ordered Nanoparticles/Block Copolymer Nanosheets with a Controllable Location of Nanoparticles

Precisely controlling the spatial distributions and arrangements of metal nanoparticles (NPs) into block copolymers is of great importance for fabricating novel nanomaterials with the desired optical and electronic properties. Herein, we develop a simple yet versatile strategy to prepare organic/inorganic nanosheets formed by the coassembly of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and PS tethered gold nanoparticles (AuNPs@PS) within emulsion droplets. The arrangement of the AuNPs@PS building blocks within the block copolymers (BCP)/AuNPs nanosheets can be adjusted by tuning the effective size ratio (λeff), which can be controlled by the core diameter of the AuNPs and the molecular weight of the PS. Furthermore, the content of the AuNPs is also another essential parameter to manipulate the structures of the nanosheets with the specific λeff. Thus, the BCP/AuNPs hybrid nanosheets with controllable distributions and arrangements of the AuNPs were successfully prepared via tuning of λeff and the content of AuNPs. This study provides a facile way to fabricate well-ordered hybrid nanosheets.

Stimuli-responsive nanoparticle self-assembly at complex fluid interfaces: a new insight into dynamic surface chemistry

The self-assembly of core/shell nanoparticles (NPs) at fluid interfaces is a rapidly evolving area with tremendous potential in various fields, including biomedicine, display devices, catalysts, and sensors. This review provides an in-depth exploration of the current state-of-the-art in the programmed design of stimuli-responsive NP assemblies, with a specific focus on inorganic core/organic shell NPs below 100 nm for their responsive adsorption properties at fluid and polymer interfaces. The interface properties, such as ligands, charge, and surface chemistry, play a significant role in dictating the forces and energies governing both NP-NP and NP-hosting matrix interactions. We highlight the fundamental principles governing the reversible surface chemistry of NPs and present detailed experimental examples in the following three key aspects of stimuli-responsive NP assembly: (i) stimuli-driven assembly of NPs at the air/liquid interface, (ii) reversible NP assembly at the liquid/liquid interface, including films and Pickering emulsions, and (iii) hybrid NP assemblies at the polymer/polymer and polymer/water interfaces that exhibit stimuli-responsive behaviors. Finally, we address current challenges in existing approaches and offer a new perspective on the advances in this field.

Nanosheet Particles with Defect-Free Block Copolymer Structures Driven by Emulsions Containing Crystallizable Surfactants

Highly anisotropic-shaped particles with well-ordered internal nanostructures have received significant attention due to their unique shape-dependent photonic, rheological, and electronic properties and packing structures. In this work, nanosheet particles with cylindrical block copolymer (BCP) arrays are achieved by utilizing collapsed emulsions as a scaffold for BCP self-assembly. Highly elongated structures with large surface areas are formed by employing crystallizable surfactants that significantly reduce the interfacial tension of BCP emulsions. Subsequently, the stabilized elongated emulsion structures lead to the formation of BCP nanosheets. Specifically, when polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and 1-octadecanol (C18-OH) are co-assembled within an emulsion, C18-OH penetrates the surfactant layer at the emulsion interface, lowering the interfacial tension (i.e., below 1 mN m-1 ) and causing emulsion deformation. In addition, C18-OH crystallization allows for kinetic arrest of the collapsed emulsion shape during solvent evaporation. Consequently, PS-b-PDMS BCPs self-assemble into defect-free structures within nanosheet particles, exhibiting an exceptionally high aspect ratio of over 50. The particle formation mechanism is further investigated by controlling the alkyl chain length of the fatty alcohol. Finally, the coating behavior of nanosheet particles is investigated, revealing that the deposition pattern on a substrate is strongly influenced by the particle's shape anisotropy, thus highlighting their potential for advanced coating applications.

Morphological Evolution of Hybrid Block Copolymer Particles: Toward Magnetic Responsive Particles

The co-assembly of block copolymers (BCPs) and inorganic nanoparticles (NPs) under emulsion confinement allows facile access to hybrid polymeric colloids with controlled hierarchical structures. Here, the effect of inorganic NPs on the structure of the hybrid BCP particles and the local distribution of NPs are studied, with a particular focus on comparing Au and Fe3O4 NPs. To focus on the effect of the NP core, Au and Fe3O4 NPs stabilized with oleyl ligands were synthesized, having a comparable diameter and grafting density. The confined co-assembly of symmetric polystyrene-b-poly(1,4-butadiene) (PS-b-PB) BCPs and NPs in evaporative emulsions resulted in particles with various morphologies including striped ellipsoids, onion-like particles, and their intermediates. The major difference in PS-b-PB/Au and PS-b-PB/Fe3O4 particles was found in the distribution of NPs inside the particles that affected the overall particle morphology. Au NPs were selectively localized inside PB domains with random distributions regardless of the particle morphology. Above the critical volume fraction, however, Au NPs induced the morphological transition of onion-like particles into ellipsoids by acting as an NP surfactant. For PS-b-PB/Fe3O4 ellipsoids, Fe3O4 NPs clustered and segregated to the particle/surrounding interface of the ellipsoids even at a low volume fraction, while Fe3O4 NPs were selectively localized in the middle of PB domains in a string-like pattern for PS-b-PB/Fe3O4 onion-like particles.

Entropically Driven Fabrication of Binary Superlattices Assembled from Polymer-Tethered Nanocubes and Nanospheres

The spontaneous organization of two types of nanoparticles (NPs) with different shapes or properties into binary nanoparticle superlattices (BNSLs) with different configurations has recently attracted significant attention due to the coupling or synergistic effect of the two types of NPs, providing an efficient and general route for designing new functional materials and devices. Here, this work reports the co-assembly of polystyrene (PS) tethered anisotropic gold nanocubes (AuNCs@PS) and isotropic gold NPs (AuNPs@PS) via an emulsion-interface self-assembly strategy. The distributions and arrangements of the AuNCs and spherical AuNPs in the BNSLs can be precisely controlled by adjusting the effective size ratio (λ_eff ) of the effective diameter (d_eff ) of the embedded spherical AuNPs to the polymer gap size (L) between the neighboring AuNCs. λ_eff determines not only the change of the conformational entropy of the grafted polymer chains (∆S_con ) but also the mixing entropy (∆S_mix ) of the two types of NPs. During the co-assembly process, ∆S_mix tends to be as high as possible, and the -∆S_con tends to be as low as possible, leading to free energy minimization. As a result, well-defined BNSLs with controllable distributions of spherical and cubic NPs can be obtained by tuning λ_eff . This strategy can also be applied for other NPs with different shapes and atomic properties, thus largely enriching the BNSL library and enabling the fabrication of multifunctional BNSLs, which have potential applications in photothermal therapy, surface-enhanced Raman scattering, and catalysis.

A Dual-Kinetic Control Strategy for Designing Nano-Metamaterials: Novel Class of Metamaterials with Both Characteristic and Whole Sizes of Nanoscale

Increasingly intricate in their multilevel multiscale microarchitecture, metamaterials with unique physical properties are challenging the inherent constraints of natural materials. Their applicability in the nanomedicine field still suffers because nanomedicine requires a maximum size of tens to hundreds of nanometers; however, this size scale has not been achieved in metamaterials. Therefore, "nano-metamaterials," a novel class of metamaterials, are introduced, which are rationally designed materials with multilevel microarchitectures and both characteristic sizes and whole sizes at the nanoscale, investing in themselves remarkably unique and significantly enhanced material properties as compared with conventional nanomaterials. Microarchitectural regulation through conventional thermodynamic strategy is limited since the thermodynamic process relies on the frequency-dependent effective temperature, Teff (ω), which limits the architectural regulation freedom degree. Here, a novel dual-kinetic control strategy is designed to fabricate nano-metamaterials by freezing a high-free energy state in a Teff (ω)-constant system, where two independent dynamic processes, non-solvent induced block copolymer (BCP) self-assembly and osmotically driven self-emulsification, are regulated simultaneously. Fe3+ -"onion-like core@porous corona" (Fe3+ -OCPCs) nanoparticles (the products) have not only architectural complexity, porous corona and an onion-like core but also compositional complexity, Fe3+ chelating BCP assemblies. Furthermore, by using Fe3+ -OCPCs as a model material, a microstructure-biological performance relationship is manifested in nano-metamaterials.

Confined Self-Assembly of Block Copolymers within Emulsion Droplets: A Perspective

When the self-assembly of block copolymers (BCPs) occurs within organic emulsion droplets in the aqueous phase, the strong structural frustration of BCP chains causes the formation of a series of well-regulated BCP particles that cannot be obtained from the self-assembly of BCPs in the bulk state or solution. In this Perspective, we review the recent progress of the self-assembly of BCPs confined in emulsion droplets. The governing factors of the structure and morphology of the as-prepared BCP particles are summarized. In addition, the applications of the as-prepared BCP particles in photonic crystals and drug release are discussed. Finally, we also give a forward-looking perspective on future challenges in this field.

A Versatile 3D-Confined Self-Assembly Strategy for Anisotropic and Ordered Mesoporous Carbon Microparticles

Mesoporous carbon microparticles (MCMPs) with anisotropic shapes and ordered structures are attractive materials that remain challenging to access. In this study, a facile yet versatile route is developed to prepare anisotropic MCMPs by combining neutral interface-guided 3D confined self-assembly (3D-CSA) of block copolymer (BCP) with a self-templated direct carbonization strategy. This route enables pre-engineering BCP into microparticles with oblate shape and hexagonal packing cylindrical mesostructures, followed by selective crosslinking and decorating of their continuous phase with functional species (such as platinum nanoparticles, Pt NPs) via in situ growth. To realize uniform in situ growth, a "guest exchange" strategy is proposed to make room for functional species and a pre-crosslinking strategy is developed to preserve the structural stability of preformed BCP microparticles during infiltration. Finally, Pt NP-loaded MCMPs are derived from the continuous phase of BCP microparticles through selective self-templated direct carbonization without using any external carbon source. This study introduces an effective concept to obtain functional species-loaded and N-doped MCMPs with oblate shape and almost hexagonal structure (p6mm), which would find important applications in fuel cells, separation, and heterogeneous catalysis.

Regioselective Seeded Polymerization in Block Copolymer Nanoparticles: Post-Assembly Control of Colloidal Features

Post-assembly modifications are efficient tools to adjust colloidal features of block copolymer (BCP) particles. However, existing methods often address particle shape, morphology, and chemical functionality individually. For simultaneous control, we transferred the concept of seeded polymerization to phase separated BCP particles. Key to our approach is the regioselective polymerization of (functional) monomers inside specific BCP domains. This was demonstrated in striped PS-b-P2VP ellipsoids. Here, polymerization of styrene preferably occurs in PS domains and increases PS lamellar thickness up to 5-fold. The resulting asymmetric lamellar morphology also changes the particle shape, i.e., increases the aspect ratio. Using 4-vinylbenzyl azide as co-monomer, azides as chemical functionalities can be added selectively to the PS domains. Overall, our simple and versatile method gives access to various multifunctional BCP colloids from a single batch of pre-formed particles.

Shaping Block Copolymer Microparticles by Positively Charged Polymeric Nanoparticles

Shape-transforming block copolymer (BCP) microparticles have attracted extensive attention due to their promising applications in nanotechnology, biomedicines, interfacial science, and other fields. As their performance is highly associated to their shape and structure, it is highly important to realize the precise control of particle shape. In this report, we propose a method to regulate the shape and structure of polystyrene-b-polydimethoxysiloxane (PS-b-PDMS) microparticles by using positively charged core-crosslinked nanoparticles (CNPs) as a co-surfactant, combining with cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrostatic repulsive interactions between CNPs and CTAB dominate the shape of PS-b-PDMS particles. Upon introducing NaCl, the electrostatic repulsion is reduced, resulting in the reshape of PS-b-PDMS particles from striped Janus ellipsoids to onion-like microspheres at a critical concentration of NaCl (c_NaCl ). Interestingly, we find that the critical c_NaCl first increased then reached a plateau, as the increase in the crosslinking degree of the CNPs. Our work provides a simple strategy to tailor the morphology of BCPs by manipulating the electrostatic interaction. This article is protected by copyright. All rights reserved.

Confinement-Assembly of Terpolymer-based Janus Nanoparticles

While the confinement assembly of block copolymers (BCPs) into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, we investigate the confinement self-assembly of JNPs in drying emulsion droplets and compare their behavior to their ABC triblock terpolymer precursor. Emulsions of both materials were prepared using Shirasu Porous Glass (SPG) membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of R_h = 250 - 500 nm (depending on the pore radius, R_pore ). The internal structure of the microparticles was verified with transmission electron microscopy (TEM) on ultrathin cross-sections and compared to the corresponding bulk morphologies. While the confinement-assembly of terpolymers resulted in microparticles with ordered inner morphologies, order for JNPs diminished when the Janus balance (JB) deviated from parity. This article is protected by copyright. All rights reserved.

A 3D Hierarchical Host with Enhanced Sodiophilicity Enabling Anode-Free Sodium-Metal Batteries

Sodium-metal batteries (SMBs) are considered as a compliment to lithium-metal batteries for next-generation high-energy batteries because of their low cost and the abundance of sodium (Na). Herein, a 3D nanostructured porous carbon particle containing carbon-shell-coated Fe nanoparticles (PC-CFe) is employed as a highly reversible Na-metal host. PC-CFe has a unique 3D hierarchy based on sub-micrometer-sized carbon particles, ordered open channels, and evenly distributed carbon-coated Fe nanoparticles (CFe) on the surface. PC-CFe achieves high reversibility of Na plating/stripping processes over 500 cycles with a Coulombic efficiency of 99.6% at 10 mA cm^-2 with 10 mAh cm^-2 in Na//Cu asymmetric cells, as well as over 14 400 cycles at 60 mA cm^-2 in Na//Na symmetric cells. Density functional theory calculations reveal that the superior cycling performance of PC-CFe stems from the stronger adsorption of Na on the surface of the CFe, providing initial nucleation sites more favorable to Na deposition. Moreover, the full cell with a PC-CFe host without Na metal and a high-loading Na₃ V₂ (PO₄ )₃ cathode (10 mg cm^-2 ) maintains a high capacity of 103 mAh g^-1 at 1 mA cm^-2 even after 100 cycles, demonstrating the operation of anode-free SMBs.

Poly(vinylpyridine)-Containing Block Copolymers for Smart, Multicompartment Particles

Multicompartment particles generated by the self-assembly of block copolymers (BCPs) have received considerable attention due to their unique morphologies and functionalities. A class of important building blocks for multicomponent particles...

Morphology and Degradation of Multicompartment Microparticles Based on Semi-Crystalline Polystyrene-block-Polybutadiene-block-Poly(L-lactide) Triblock Terpolymers

The confinement assembly of block copolymers shows great potential regarding the formation of functional microparticles with compartmentalized structure. Although a large variety of block chemistries have already been used, less is known about microdomain degradation, which could lead to mesoporous microparticles with particularly complex morphologies for ABC triblock terpolymers. Here, we report on the formation of triblock terpolymer-based, multicompartment microparticles (MMs) and the selective degradation of domains into mesoporous microparticles. A series of polystyrene-block-polybutadiene-block-poly(L-lactide) (PS-b-PB-b-PLLA, SBL) triblock terpolymers was synthesized by a combination of anionic vinyl and ring-opening polymerization, which were transformed into microparticles through evaporation-induced confinement assembly. Despite different block compositions and the presence of a crystallizable PLLA block, we mainly identified hexagonally packed cylinders with a PLLA core and PB shell embedded in a PS matrix. Emulsions were prepared with Shirasu Porous Glass (SPG) membranes leading to a narrow size distribution of the microparticles and control of the average particle diameter, d ≈ 0.4 µm–1.8 µm. The core–shell cylinders lie parallel to the surface for particle diameters d < 0.5 µm and progressively more perpendicular for larger particles d > 0.8 µm as verified with scanning and transmission electron microscopy and particle cross-sections. Finally, the selective degradation of the PLLA cylinders under basic conditions resulted in mesoporous microparticles with a pronounced surface roughness.

Engineering the Surface Pattern of Microparticles: From Raspberry-like to Golf Ball-like

Control of the shape and uniformity of colloid particles is essential for realizing their functionality in various applications. Herein, we report a facile approach for the synthesis of narrowly dispersed anisotropic microparticles with well-defined raspberry-like and golf ball-like surface patterns. First, we demonstrate that hybrid raspberry-like particles can be achieved through a one-pot polymerization method using glycidyl polyhedral oligomeric silsesquioxane (GPOSS) and pentaerythritol tetra(3-mercaptopropionate) (PETMP) as monomers. Varying the polymerization parameters such as catalyst loading, monomer concentration, and the molar ratio of monomers, we are able to regulate the sizes and surface protrusion numbers of these raspberry-like microparticles. The formation mechanism is attributed to a competition balance between thiol-epoxy reaction and thiol-thiol coupling reaction. The former promotes rapid formation of large core particles between PETMP and GPOSS droplets (which can serve as core particles), while the latter allows for generation of surface protrusions by PETMP self-polymerization, leading to the formation of raspberry-like surface patterns. Based on the different POSS contents in the surface protrusions and cores of the raspberry-like microparticles, we demonstrate that they can be used as precursors to produce microporous silica (sub)microparticles with golf ball-like morphology via pyrolysis subsequently. Overall, this work provides a facile yet controllable approach to synthesize narrowly dispersed anisotropic microparticles with diverse surface patterns.

From shaping to functionalization of micro-droplets and particles

The structure of microdroplet and microparticle is a critical factor in their functionality, which determines the distribution and sequence of physicochemical reactions. Therefore, the technology of precisely tailoring their shape is requisite for implementing the user demand functions in various applications. This review highlights various methodologies for droplet shaping, classified into passive and active approaches based on whether additional body forces are applied to droplets to manipulate their functions and fabricate them into microparticles. The passive approaches cover batch emulsification, solvent evaporation and diffusion, micromolding, and microfluidic methods. In active approaches, the external forces, such as electrical and magnetic fields or optical lithography, are applied to microdroplets. Special attention is also given to latest technologies using microdroplets and microparticles, especially in the fields of biological, optical, robotic, and environmental applications. Finally, this review aims to address the advantages and disadvantages of the introduced approaches and suggests the direction for further development in this field.

Responsive Nanostructured Polymer Particles

Responsive polymer particles with switchable properties are of great importance for designing smart materials in various applications. Recently, the self-assembly of block copolymers (BCPs) and polymer blends within evaporative emulsions has led to advances in the shape-controlled synthesis of polymer particles. Despite extensive recent progress on BCP particles, the responsive shape tuning of BCP particles and their applications have received little attention. This review provides a brief overview of recent approaches to developing non-spherical polymer particles from soft evaporative emulsions based on the physical principles affecting both particle shape and inner structure. Special attention is paid to the stimuli-responsive, shape-changing nanostructured polymer particles, i.e., design of polymers and surfactant pairs, detailed experimental results, and their applications, including the state-of-the-art progress in this field. Finally, the perspectives on current challenges and future directions in this research field are presented, including the development of surfactants with higher reversibility to multiple stimuli and polymers with unique structural functionality, and diversification of polymer architectures.

Shaping Block Copolymer Microparticles by pH-Responsive Core-Cross-Linked Polymeric Nanoparticles

Block copolymer microparticles with controllable morphology have drawn widespread attention owing to their promising applications in photonic materials, energy storage, and other areas. Hence, it is highly desired to achieve a controllable transformation of microparticle morphology. In this work, we report a simple method to shape the morphology of polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) microparticles, by employing core-cross-linked polymeric nanoparticles (CNPs) as cosurfactants which are synthesized through cross-linking P4VP segment of PS-block-poly(4-vinylpyridine) (PS-b-P4VP). The addition of pH-responsive CNPs makes the shape of pH-inert PS-b-PDMS microparticles sensitive to pH value. The PS-b-PDMS microparticles transformed from elongated Janus pupa-like particles to onion-like particles by decreasing the pH value of the aqueous phase. The deformation mechanism is investigated by changing pH value, the weight fraction of CNPs, and surfactant property. This study provides a facile strategy to deform microparticles of pH-inert BCPs by tuning pH value, which is anticipated to be applicable to other non-pH-responsive BCP microparticles.

Tailored Polymer Particles with Ordered Network Structures in Emulsion Droplets

The structural control of block copolymer (BCP) particles, which determines their properties and utilities, is quite important. Understanding the structural relationship between solution-cast samples and polymer particles in a confined space is necessary to precisely regulate the internal structure of polymer particles. Therefore, a facile method by choosing an appropriate selective solvent is reported to prepare spherical polymer particles with ordered network structures. The rod-coil BCP, poly(dimethylsiloxane)-b-poly{2,5-bis[(4-methoxyphenyl)-oxycarbonyl]styrene} (PDMS-b-PMPCS), was chosen as a model polymer because of its strong phase segregation ability. First, the structures of the BCP with a thermodynamically stable lamellar structure cast from different selective solvents were systematically studied. Then, a polymer particle with the same internal structure as that of the solution-cast sample can be easily prepared by self-assembling in an emulsion confined space. The relatively large particle size is of importance in this process because the large value of the particle size to periodicity ratio can provide a weak confined environment. This method helps us understand the inherent self-assembling mechanism of polymer particles in an emulsion confined space and accurately control the internal structure of the polymer particle obtained.

Encapsulation of inorganic nanoparticles in a block copolymer vesicle wall driven by the interfacial instability of emulsion droplets

We proposed an effective route, i.e., three-dimensional confined co-assembly of block copolymers and inorganic nanoparticles, to efficiently encapsulate high-density and large-size nanoparticles into the wall of polymeric vesicles.

Transformable Colloidal Polymer Particles with Ordered Internal Structures

Based on studies combining experiments and simulations, internally ordered colloidal particles that are able to undergo morphological transformations both in shape and internal structure are presented. The particles are prepared by emulsion solvent evaporation-induced 3D soft confined assembly of di-block copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP). Control over the solvent selectivity leads to a dramatic change in shape and internal structure for particles. Pupa-like particles of lamellar morphology are obtained when using a non-selective solvent, while patchy particles possessing a plum pudding structure formed when the solvent is selective for PS-block. More interestingly, 3D soft confined annealing drives order-order morphological transformation of the particles. The morphology of reshaped particles can be well controlled by varying the solvent selectivity, annealing time, and interfacial interaction. The experimental results can be explained based on simulations. This study can offer considerable scope for the design of new stimuli-responsive colloidal particles for potential applications in photonic crystal, drug delivery and release, sensor and smart coating, etc.

Softness- and Size-Dependent Packing Symmetries of Polymer-Grafted Nanoparticles

Achieving ordered arrays of nanoparticles (NPs) with controlled packing symmetry and interparticle spacing is of great importance to design complex metamaterials. Herein, we report softness- and size-dependent self-assembly behavior of polystyrene-grafted Au NPs (Au@PS NPs). We varied the core size of Au NPs from 1.9 to 9.6 nm and the number-average molecular weight (M_n) of thiol-terminated polystyrene from 1.8 to 7.9 kg mol^-1. The optimal packing model based on an "effective softness" parameter λ_eff that accounts for close-packed and semidilute brush regimes could predict the effective radius of Au@PS NPs (within ±9%) for a wide range of PS M_n, grafting density, and Au core size. With increasing λ_eff, the self-assembled Au@PS NP superlattices undergo a symmetry transition from hexagonal close packed (hcp) to body-centered tetragonal (bct) to body-centered cubic (bcc). This work demonstrates the effective softness model as a simple but robust tool for the design of NP superlattices with precisely controlled interparticle distance and packing symmetry, both of which are critical for the development of sophisticated materials through control of nanoscale structure.

Design of Waterborne Asymmetric Block Copolymers as Thermoresponsive Materials

AB diblock waterborne copolymers made of styrene (St) and 2-ethylhexyl acrylate (2EHA) were synthesized by means of two-step reversible addition fragmentation chain transfer (RAFT) (mini)emulsion polymerization. Monofunctional asymmetric RAFT agent was used to initiate the polymerization. The hard polystyrene “A” block was synthesized via miniemulsion polymerization followed by 2EHA pre-emulsion feeding to form the soft “B” block. Polymerization kinetics and the evolution of the molecular weight distribution were followed during synthesis of both initial and final block copolymers. DSC measurements of the block copolymers revealed the existence of two glass transition temperatures (Tgs) and thus the occurrence of two-phase systems. Microscopic techniques (atomic force microscopy (AFM) and transmission electron microscopy (TEM)) were used to study the phase separation within the particles in the latex form, after film formation at room temperature cast directly from the latex and after different post-treatments well above the Tg of the hard-polystyrene domains, when complete particle coalescence had occurred. The morphological differences observed after different annealing temperatures were correlated with the mechanical properties analyzed by DMTA measurements. Finally, the differences found in the mechanical properties of the block copolymers annealed at different temperatures were correlated to their heat seal application results.

Starch nanoparticles prepared by enzymatic hydrolysis and self-assembly of short-chain glucans

Enzymatic hydrolysis and self-assembly are considered promising methods for preparation of starch nanoparticles (SNPs) because they are environmentally friendly, and time- and cost-effective. These methods are based on the self-assembly of short-chain glucans released from the α-1,6 bonds in amylopectin. Since their discovery, many studies have described the structural and physicochemical properties of self-assembled SNPs. Self-assembled SNPs can be prepared by two methods: using only the soluble portion containing the short-chain glucans, or using the whole hydrolyzate including both insoluble and soluble fractions. Although the structural and physical properties of self-assembled SNPs can be attributed to the composition of the hydrolyzates that participate in self-assembly, this aspect has not yet been discussed. This review focuses on SNPs self-assembled with only soluble short-chain glucans and addresses their characteristics, including formation mechanisms as well as structural and physicochemical properties, compared with SNPs prepared with total hydrolyzates.

100th Anniversary of Macromolecular Science Viewpoint: Block Copolymer Particles: Tuning Shape, Interfaces, and Morphology

Confined assembly of block copolymers (BCPs) is receiving increasing attention due to the ability to create unconventional morphologies that cannot be observed in the corresponding bulk systems. This effect is further driven by the simplicity and versatility of these procedures for controlling the shape of particles prepared by 3D soft confinement of BCPs in emulsions. By taking advantage of a mobile emulsion interface, the one-step formation of nonspherical BCP particles through spontaneous deformation is possible with design principles and theoretical models for controlling shape/nanostructure now being established. This Viewpoint highlights strategies for shape tuning of BCP particles, currently accessible shapes, their controllability, and potential application. The emergence of 3D soft confinement of BCPs and related theory is overviewed with a focus on current strategies, types of nonspherical shapes achieved, and structure-property relationships for nonspherical BCP particles. Finally, the applications and future perspectives for these materials are discussed.

Anisotropic Nano-/Microparticles from Diversified Copolymers by Solvent-Mediated Self-Assembly

Effective synthesis of anisotropic nano-/microparticles (APs) by the copolymers is of great significance in nanomaterials and nanotechnology. However, achieving regulation of the morphology, composition, property, and particle size of anisotropic nano-/microparticles (APs) with diversified copolymers is difficult due to complex mechanism and formation conditions. In this work, a versatile one-pot solvent-mediated self-assembly (SmSa) strategy had been proposed for the facile one-pot synthesis of shape-tunable anisotropic nano-/microparticles (StAPs). In addition, the formation mechanism of StAPs was determined through numerous characterization methods related to morphology and element distribution. The results revealed that the anisotropic architectures of StAPs were closely related to the nature of poly(methylacrylic acid-methyl methacrylate-butyl acrylate) (L₁) and poly(butyl acrylate-styrene) (L₂) polymer chains imparted by polymer blocks of different domains. Therefore, the ordered assembly of the rigid and hydrophobic L₂ polymer chains in micelles consisting of the flexible and amphiphilic L₁ and solvent could be successfully carried out under the mediation of increasing solvent polarity and the strong adsorption of poly(vinylpyrrolidone) for L₂. Furthermore, the developed versatile SmSa strategy and the obtained StAPs play an essential role in the development of nanoscience and nanotechnology. Particularly given its adjustable emulsifying properties at different pH values, as well as numerous sites for further modification by fluorescent or other components, it can be employed to synthesize a wide range of functional materials.

Electrostatic Interaction Mediates the Formation of Vesicular Structures from Coassembly of PS-b-PAA with Quantum Dots

Vesicular structures of block copolymers and inorganic nanoparticles with good stability have potential applications in therapeutic drug release and bioimaging. Herein, a block copolymer of polystyrene-b-poly(acrylic acid) (PS₄₈-b-PAA₆₇) and water-soluble AgInS₂/ZnS core/shell quantum dots (QDs) capped with gelatin and thioglycolic acid were coassembled in tetrahydrofuran by adding water. The positively charged QDs bind to negatively charged PAA segments through electrostatic interaction. Numerous vesicular structures, such as uniform bilayer vesicles, flowerlike large compound vesicles, onionlike lamellar structures consisting of alternating PS and PAA&QD layers, and multilamellar vesicles with spaces between concentric vesicle layers were obtained from the coassembly of PS₄₈-b-PAA₆₇ with QDs. The binding of the positively charged QDs to the PAA block influenced both the intra-aggregate PAA corona conformation and the interaggregate interactions. The key parameters affecting the formation of these vesicular structures included the QD content, solution pH, and water addition rate. Thus, tunable vesicular structures can be prepared and regulated through this simple but effective coassembly method.

Well-Ordered Inorganic Nanoparticle Arrays Directed by Block Copolymer Nanosheets

Precise control over the spatial arrangement of inorganic nanoparticles on a large scale is desirable for the design of functional nanomaterials, sensing, and optical/electronic devices. Although great progress has been recently made in controlling the organization of nanoparticles, there still remains a grand challenge to arrange nanoparticles into highly-ordered arrays over multiple length scales. Here, we report the directed arrangement of inorganic nanoparticles into arrayed structures with long-range order, up to tens of microns, by using hexagonally-packed cylindrical patterns of block copolymer nanosheets self-assembled within collapsed emulsion droplets as scaffolds. This technique can be used to generate nanoparticle arrays with various nanoparticle arrangements, including hexagonal honeycomb structures, periodic nanoring structures, and their combinations. This finding provides an effective route to fabricate diverse nanoparticle arrayed structures for the design of functional materials and devices.

Formation Mechanisms of Porous Particles from Self-Assembly of Amphiphilic Diblock Copolymers inside an Oil-in-Water Emulsion Droplet upon Solvent Evaporation

The formation mechanisms of porous particles from self-assembly of amphiphilic diblock copolymers inside an oil-in-water emulsion droplet upon evaporation of the organic solvent are investigated based on Monte Carlo simulations for the first time. A morphological diagram of particles is constructed as a function of the surfactant concentration (φ) and the copolymer composition characterized by the volume fraction of the hydrophilic B block ( f_B). Particles with various morphologies are predicted. Morphological sequences from non-porosity to closed-porosity to capsules and finally to open-porosity particles are usually observed with increasing φ when f_B ≤ 1/2, with the only exception that capsules do not occur when f_B = 1/6. Furthermore, the critical φ value for a given morphological transition usually decreases with increasing f_B. Micelles are always observed at higher φ regions when f_B > 1/2. It is found that the specific surface area falls on almost the same regime for particles with the same kind of morphology, indicating that the morphology of a particle largely determines its specific surface area. The chain stretching varies with the particle morphology. It is the presence of the surfactant that makes the formation of porous particles possible, while when φ > 0, multiple morphological transitions can be induced by changing f_B. In the process of organic solvent removal, the value of f_B may affect the shape of pores inside the droplet and hence leads to the f_B dependence of the morphological sequences. When the solvent evaporation is not too fast, the resulting morphological sequence does not depend on the evaporation rate. Our results are compared with related experiments.

Shape and Color Switchable Block Copolymer Particles by Temperature and pH Dual Responses

Herein, we report a simple and robust strategy for preparing dual-responsive shape-switchable block copolymer (BCP) particles, which respond to subtle temperature and pH changes near physiological conditions (i.e., human body temperature and neutral pH). The shape transition of polystyrene- b-poly(4-vinylpyridine) BCP particles between lens and football shapes occurs in very narrow temperature and pH ranges: no temperature-based transition for pH 6.0, 40-50 °C transition for pH 6.5, and 25-35 °C for pH 7.0. To achieve these shape transitions, temperature/pH-responsive polymer surfactants of poly( N-(2-(diethylamino)ethyl)acrylamide- r- N-isopropylacrylamide) are designed to induce dramatic changes in relative solubility and their location in response to temperature and pH changes near physiological conditions. In addition, the BCP particles exhibit reversible shape-transforming behavior according to orthogonal temperature and pH changes. Colorimetric measurements of temperature and pH changes are enabled by shape-transforming properties combined with selective positioning of dyes, suggesting promising potential for these particles in clinical and biomedical applications.