Regioselective borylation of the C-H bonds in alkylamines and alkyl ethers. Observation and origin of high reactivity of primary C-H bonds beta to nitrogen and oxygen

The Difference in Ir-Catalyzed C(sp2)-H and C(sp3)-H Bond Activation Assisted by a Directing Group: Cyclometalation via Cis- or Trans-Chelation?

Iridium-catalyzed C-H borylation of aromatic and aliphatic hydrocarbons assisted by a directing group was theoretically investigated. Density functional theory (DFT) calculations revealed both Ir-catalyzed C(sp2)-H and C(sp3)-H borylations via an IrIII/IrV catalytic cycle, where the tetra-coordinated (C, N)IrIII(Bpin)2 complex with two vacant sites is an active species. Dramatically, the orientation of cyclometalation for C(sp2)-H bond activation assisted by a directing group is different from the C(sp3)-H one. The activation energy (ΔG°‡ = 28.5 kcal mol-1) of the C(sp2)-H bond via trans-chelation to form cyclometalation is lower than that (41.4 kcal mol-1) via cis-chelation. In contrast, the ΔG°‡ (26.6 kcal mol-1) of the C(sp3)-H bond via cis-chelation to form cyclometalation is lower than that (34.3 kcal mol-1) via trans-chelation. In addition, the rate-determining step of Ir-catalyzed C(sp2)-H borylation is oxidative addition of the C(sp2)-H bond, while that of C(sp3)-H analogues is hydride migration. Such differences arise from not only the differences in the steric hindrance of the C(sp2) and secondary C(sp3) atoms but also the differences in the trans effect and steric effect of the two vacant sites of active species. These findings were expected to facilitate further studies on the design and synthesis of innovative ligands for Ir-catalyzed C-H borylation.

Site-Selective Distal C(sp3)-H Bromination of Aliphatic Amines as a Gateway for Forging Nitrogen-Containing sp3 Architectures

Herein, we disclose a new strategy that rapidly and reliably incorporates bromine atoms at distal, secondary C(sp3)-H sites in aliphatic amines with an excellent and predictable site-selectivity pattern. The resulting halogenated building blocks serve as versatile linchpins to enable a series of carbon-carbon and carbon-heteroatom bond-formations at remote C(sp3) sites, thus offering a new modular and unified platform that expediates the access to advanced sp3 architectures possessing valuable nitrogen-containing saturated heterocycles of interest in medicinal chemistry settings.

Access to C(sp3) borylated and silylated cyclic molecules: hydrogenation of corresponding arenes and heteroarenes

This paper presents a simple and cost-effective hydrogenation method for synthesizing a myriad of cycloalkanes and saturated heterocycles bearing boryl or silyl substituents. The catalyst used are heterogeneous, readily available, bench stable, and recyclable. Also demonstrated is the application of the method to compounds that possess both boryl and silyl groups. When combined with Ir-catalyzed sp2 C-H borylation, such hydrogenations offer a two-step complementary alternative to direct sp3 C-H borylations that can suffer selectivity and reactivity issues. Of practical value to the community, complete stereochemical analyses of reported borylated compounds that were never fully characterized are reported herein.

2-Aminophenanthroline Ligands Enable Mild, Undirected, Iridium-Catalyzed Borylation of Alkyl C-H Bonds

The catalytic, undirected borylation of alkyl C-H bonds typically occurs at high reaction temperatures or with excess substrate, or both, because of the low reactivity of alkyl C-H bonds. Here we report a new iridium system comprising 2-anilino-1,10-phenanthroline as the ligand that catalyzes the borylation of alkyl C-H bonds with little to no induction period and with high reaction rates. This superior activation and reactivity profile of 2-aminophenanthroline-ligated catalysts leads to broader reaction scope, including reactions of sensitive substrates, such as epoxides and glycosidic acetals, enhanced diastereoselectivity, and higher yields of borylated products. These catalysts also enable the borylation of alkanes, amines, and ethers at room temperature for the first time. Mechanistic studies imply that facile N-borylation occurs under the reaction conditions and that iridium complexes containing N-boryl aminophenanthrolines are competent precatalysts for the reaction.

Catalytic Enantioselective Primary C-H Borylation for Acyclic All-Carbon Quaternary Stereocenters

Creating a perfect catalyst to operate enzyme-like chiral recognition has been a long-sought aim. A challenging example in this context is constructing acyclic all-carbon quaternary stereogenic centers by transition metal-catalyzed enantioselective C-H activation. We now report highly enantioselective iridium-catalyzed primary C-H borylation of α-all-carbon substituted 2,2-dimethyl amides enabled by a tailor-made chiral bidentate boryl ligand (CBL). The success of the current transformation is attributed to the CBL/iridium catalyst, which has a confined chiral pocket. This protocol provides a diverse array of acyclic all-carbon quaternary stereocenters with excellent enantiocontrol and distinct structural features. Computational study reveals that steric hindrance of CBL could regulate the type of dominant orbital interaction between the catalyst and substrate, which is crucial to conferring high chiral induction.

β-C-H Allylation of Trialkylamines with Allenes Promoted by Synergistic Borane/Palladium Catalysis

Functionalization of the C(sp3 )-H bonds of trialkylamines is challenging, especially for reactions at positions other than the α position. Herein, we report a method for β-C(sp3 )-H allylation of trialkylamines. In these reactions, which involve synergistic borane/palladium catalysis, an enamine intermediate is first generated from the amine via α,β-dehydrogenation promoted by B(C6 F5 )3 and a base, and then the enamine undergoes palladium-catalyzed reaction with an allene to give the allylation product. Because the hydride and the proton resulting from the initial dehydrogenation are ultimately shuttled to the product by B(C6 F5 )3 and the palladium catalyst, respectively, these reactions show excellent atom economy. The establishment of this method paves the way for future studies of C-H functionalization of trialkylamines by means of synergistic borane/transition-metal catalysis.

Catalytic Undirected Meta-Selective C-H Borylation of Metallocenes

Metallocenes are privileged backbones in the fields of synthetic chemistry, catalysis, polymer science, etc. Direct C-H functionalization is undoubtedly the simplest approach for tuning the properties of metallocenes. However, owing to the presence of multiple identical C(sp2 )-H sites, this protocol often suffers from low reactivity and selectivity issues, especially for the regioselective synthesis of 1,3-difunctionalized metallocenes. Herein, an efficient iridium-catalyzed meta-selective C-H borylation of metallocenes is reported. With no need of preinstalled directing groups, this approach enables a rapid synthesis of various boronic esters based on benzoferrocenes, ferrocenes, ruthenocene, and related half sandwich complex. A broad range of electron-deficient and -rich functional groups are all compatible with the process. Notably, C-H borylation of benzoferrocenes takes place exclusively at the benzene ring, which is likely ascribed to the shielding effect of pentamethylcyclopentadiene. The synthetic utility is further demonstrated by easy scalability to gram quantities, the conversion of boron to heteroatoms including N3 , SePh, and OAc, as well as diverse cross-coupling reactions.

Metal-free, photoinduced remote C(sp3)-H borylation

Here, we describe a protocol for the metal-free, photo-induced borylation of unactivated C(sp3)-H bonds distal to an O-oxalate hydroxamic ester functionality. The methodology requires only substrate and bis(catecholato)diboron under light irradiation to effect the desired transformation. A range of linear and cyclic tertiary and secondary borylation products are obtained in good yields and high site-selectivity enabling the late-stage C(sp3)-H borylation of natural product derivatives and drug-like compounds.

Transition metal-free visible light photoredox-catalyzed remote C(sp3)-H borylation enabled by 1,5-hydrogen atom transfer

The borylation of unreactive carbon-hydrogen bonds is a valuable method for transforming feedstock chemicals into versatile building blocks. Here, we describe a transition metal-free method for the photoredox-catalyzed borylation of unactivated C(sp³)-H bond, initiated by 1,5-hydrogen atom transfer (HAT). The remote borylation was directed by 1,5-HAT of the amidyl radical, which was generated by photocatalytic reduction of hydroxamic acid derivatives. The method accommodates substrates with primary, secondary and tertiary C(sp³)-H bonds, yielding moderate to good product yields (up to 92%) with tolerance for various functional groups. Mechanistic studies, including radical clock experiments and DFT calculations, provided detailed insight into the 1,5-HAT borylation process.

Catalytic undirected borylation of tertiary C-H bonds in bicyclo[1.1.1]pentanes and bicyclo[2.1.1]hexanes

Catalytic borylations of sp3 C-H bonds occur with high selectivities for primary C-H bonds or secondary C-H bonds that are activated by nearby electron-withdrawing substituents. Catalytic borylation at tertiary C-H bonds has not been observed. Here we describe a broadly applicable method for the synthesis of boron-substituted bicyclo[1.1.1]pentanes and (hetero)bicyclo[2.1.1]hexanes by an iridium-catalysed borylation of the bridgehead tertiary C-H bond. This reaction is highly selective for the formation of bridgehead boronic esters and is compatible with a broad range of functional groups (>35 examples). The method is applicable to the late-stage modification of pharmaceuticals containing this substructure and the synthesis of novel bicyclic building blocks. Kinetic and computational studies suggest that C-H bond cleavage occurs with a modest barrier and that the turnover-limiting step of this reaction is an isomerization that occurs prior to reductive elimination that forms the C-B bond.

General and Selective Metal-Free Radical α-C-H Borylation of Aliphatic Amines

Despite recent developments, selective C(sp3)-H borylation of feedstock amines remains a formidable challenge. Herein, we have developed a general, mild, and photoinduced transition metal- and strong base-free method for α-C(sp3)-H borylation of amines. This protocol features a regioselective 1,5-hydrogen atom transfer process to access key α-aminoalkyl radical intermediate using commercially available easy-to-install/remove iodobenzoyl radical translocating group. Remarkably, this general, efficient, and operationally simple method allows activation of primary and secondary α-C-H sites of a broad range of acyclic and cyclic amines toward highly regio- and diastereoselective synthesis of valuable α-aminoboronates. Utility of this protocol has been demonstrated by its employment in late-stage borylation of structurally complex amines and formal C-H arylation reaction of amines. Thus, it is expected that this operationally simple, general, and practical method will find broad application in organic synthesis and drug discovery.

Recent Advances in Transition-Metal-Catalyzed C-H Functionalization of Ferrocene Amides

During the past decades, in synthetic organic chemistry, directing-group-assisted C-H functionalization is found to be a key tool for the expedient and site-selective construction of C-C and hybrid bonds. Among C-H functionalization of ferrocene derivatives, the directed group strategy is undoubtedly the most commonly used method. Compared to the other directing groups, ferrocene amides can be synthesized easily and are now recognized as one of the most efficient devices for the selective functionalization of certain positions because its metal centre permits fine, tuneable and reversible coordination. The family of amide directing groups mainly comprises monodentate and bidentate directing groups, which are categorized on the basis of coordination sites. In this review, various C-H bond functionalization reactions of ferrocene using amide directing groups are broadly discussed.

Metal-catalysed C-H bond activation and borylation

Transition metal-catalysed direct borylation of hydrocarbons via C-H bond activation has received a remarkable level of attention as a popular reaction in the synthesis of organoboron compounds owing to their synthetic versatility. While controlling the site-selectivity was one of the most challenging issues in these C-H borylation reactions, enormous efforts of several research groups proved instrumental in dealing with selectivity issues that presently reached an impressive level for both proximal and distal C-H bond borylation reactions. For example, in the case of ortho C-H bond borylation reactions, innovative methodologies have been developed either by the modification of the directing groups attached with the substrates or by creating new catalytic systems via the design of new ligand frameworks. Whereas meta and para selective C-H borylations remained a formidable challenge, numerous innovative concepts have been developed within a very short period of time by the development of new catalytic systems with the employment of various noncovalent interactions. Moreover, significant advancements have occurred for aliphatic C(sp³)-H borylations as well as enantioselective borylations. In this review article, we aim to discuss and summarize the different approaches and findings related to the development of directed proximal ortho, distal meta/para, aliphatic (racemic and enantioselective) borylation reactions since 2014. Additionally, considering the C-H borylation reaction as one of the most important mainstream reactions, various applications of this C-H borylation reaction toward the synthesis of natural products, therapeutics, and applications in materials chemistry will be summarized in the last part of this review article.

Iridium-Catalyzed C(sp3 )-H Borylation Using Silyl-Bipyridine Pincer Ligands

New ligands for the iridium-catalyzed C(sp³ )-H borylation of aliphatic compounds were established. In sharp contrast to 6-methyl-2,2'-bipyridine and 6-isobutyl-2,2'-bipyridine, 2,2'-bipyridine and 1,10-phenanthroline derivatives bearing a hydrosilylmethyl group (which would give a thermally stable NNSi pincer complex) served as suitable ligands for the reaction. Among them, a phenanthroline-based NNSi pincer ligand was shown to be an excellent ligand, and various aliphatic compounds were efficiently converted to the corresponding borylated products using the Ir/NNSi pincer catalyst system. The NNSi pincer ligand showed unique selectivity and enabled the iridium-catalyzed C(sp³ )-H borylation using pinacolborane [H-B(pin)] instead of B₂ (pin)₂ . The formation of an iridium complex bearing a quinoline-based NNSi pincer ligand from [IrCl(cod)]₂ was observed, and the catalytic activity of the complex was demonstrated.

Amide directed iridium C(sp3)-H borylation catalysis with high N-methyl selectivity

A bidentate monoanionic ligand system was developed to enable iridium catalyzed C(sp³)-H activation borylation of N-methyl amides. Borylated amides were obtained in moderate to good isolated yields, and exclusive mono-borylation allowed the amide to be the limiting reagent. Selectivity for C(sp³)-H activation was demonstrated in the presence of sterically available C(sp³)-H bonds. Competitive kinetic isotope studies revealed a large primary isotope effect, implicating C-H activation as the rate limiting step.

Selective Benzylic CH-Borylations by Tandem Cobalt Catalysis

Metal-catalyzed C-H activations are environmentally and economically attractive synthetic strategies for the construction of functional molecules as they obviate the need for pre-functionalized substrates and minimize waste generation. Great challenges reside in the control of selectivities, the utilization of unbiased hydrocarbons, and the operation of atom-economical dehydrocoupling mechanisms. An especially mild borylation of benzylic CH bonds was developed with the ligand-free pre-catalyst Co[N(SiMe3 )2 ]2 and the bench-stable and inexpensive borylation reagent B2 pin2 that produces H2 as the only by-product. A full set of kinetic, spectroscopic, and preparative mechanistic studies are indicative of a tandem catalysis mechanism of CH-borylation and dehydrocoupling via molecular CoI catalysts.

Rhodium Indenyl NHC and Fluorenyl-Tethered NHC Half-Sandwich Complexes: Synthesis, Structures and Applications in the Catalytic C-H Borylation of Arenes and Alkanes

Indenyl (Ind) rhodium N-heterocyclic carbene (NHC) complexes [Rh(η5 -Ind)(NHC)(L)] were synthesised for 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene (SIPr) with L=C2 H4 (1), CO (2 a) and cyclooctene (COE; 3), for 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene (SIMes) with L=CO (2 b) and COE (4), and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) with L=CO (2 c) and COE (5). Reaction of SIPr with [Rh(Cp*)(C2 H4 )2 ] did not give the desired SIPr complex, thus demonstrating the "indenyl effect" in the synthesis of 1. Oxidative addition of HSi(OEt)3 to 3 proceeded under mild conditions to give the Rh silyl hydride complex [Rh(Ind){Si(OEt)3 }(H)(SIPr)] (6) with loss of COE. Tethered-fluorenyl NHC rhodium complexes [Rh{(η5 -C13 H8 )C2 H4 N(C)C2 Hx NR}(L)] (x=4, R=Dipp, L=C2 H4 : 11; L=COE: 12; L=CO: 13; R=Mes, L=COE: 14; L=CO: 15; x=2, R=Me, L=COE: 16; L=CO: 17) were synthesised in low yields (5-31 %) in comparison to good yields for the monodentate complexes (49-79 %). Compounds 3 and 1, which contain labile alkene ligands, were successful catalysts for the catalytic borylation of benzene with B2 pin2 (Bpin=pinacolboronate, 97 and 93 % PhBpin respectively with 5 mol % catalyst, 24 h, 80 °C), with SIPr giving a more active catalyst than SIMes or IMes. Fluorenyl-tethered NHC complexes were much less active as borylation catalysts, and the carbonyl complexes were inactive. The borylation of toluene, biphenyl, anisole and diphenyl ether proceeded to give meta substitutions as the major product, with smaller amounts of para substitution and almost no ortho product. The borylation of octane and decane with B2 pin2 at 120 and 140 °C, respectively, was monitored by 11 B NMR spectroscopy, which showed high conversions into octyl and decylBpin over 4-7 days, thus demonstrating catalysed sp3 C-H borylation with new piano stool rhodium indenyl complexes. Irradiation of the monodentate complexes with 400 or 420 nm light confirmed the ready dissociation of C2 H4 and COE ligands, whereas CO complexes were inert. Evidence for C-H bond activation in the alkyl groups of the NHC ligands was obtained.

Iridium-Catalyzed Regioselective Borylation through C-H Activation and the Origin of Ligand-Dependent Regioselectivity Switching

Research efforts in catalytic regioselective borylation using C-H bond activation of arenes have gained considerable recent attention. The ligand-enabled regiocontrol, such as in the borylation of benzaldehyde, the selectivity could be switched from the ortho to meta position, under identical conditions, by just changing the external ligand (L) from 8-aminoquinoline (8-AQ) to tetramethylphenanthroline (TMP). The DFT(B3LYP-D3) computations helped us learn that the energetically preferred catalytic pathway includes the formation of an Ir-π-complex between the active catalyst [Ir(L)(Bpin)₃] and benzaldimine, a C-H bond oxidative addition (OA) to form an Ir(V)aryl-hydride intermediate, and a reductive elimination to furnish the borylated benzaldehyde as the final product. The lowest energetic span (δE_ortho = 26 kcal/mol with 8-AQ) is noted in the ortho borylation pathway, with the OA transition state (TS) as the turnover-determining TS. The change in regiochemical preference to the meta borylation (δE_meta = 26) with TMP is identified. A hemilabile mode of 8-AQ participation is found to exhibit a δE_ortho of 24 kcal/mol for the ortho borylation, relative to that in the chelate mode (δE_ortho = 26 kcal/mol). The predicted regioselectivity switching is in good agreement with the earlier experimental observations.

Dual C(sp3)-H Functionalization of Cyclic Ethers via Singlet Oxygen-Mediated Ring Opening and Ring Closing

A metal-free dual C(sp³)-H bond functionalization of saturated cyclic ethers via photooxidative singlet oxygen-mediated ring opening and ring closing has been developed, providing a method for generating hydrobenzofurans/pyrans/dioxins. Mechanistic studies have confirmed that ring-opening intermediates were effectively generated by singlet oxygen-mediated C(sp³)-H activation and efficiently reacted with aldehydes and activated methylene compounds to form a wide array of products with high diastereoselectivities (up to >95:5 dr). This study is a rare example of α,β-dual C(sp³)-H bond functionalization of ethers.

α-Aminoboronates: recent advances in their preparation and synthetic applications

α-Aminoboronic acids and their derivatives are useful as bioactive agents. Thus far, three compounds containing an α-aminoboronate motif have been approved by the Food and Drug Administration (FDA) as protease inhibitors, and more are currently undergoing clinical trials. In addition, α-aminoboronic acids and their derivatives have found applications in organic synthesis, e.g. as α-aminomethylation reagents for the synthesis of chiral nitrogen-containing molecules, as nucleophiles for preparing valuable vicinal amino alcohols, and as bis-nucleophiles in the construction of valuable small molecule scaffolds. This review summarizes new methodology for the preparation of α-aminoboronates, including highlights of asymmetric synthetic methods and mechanistic explanations of reactivity. Applications of α-aminoboronates as versatile synthetic building blocks are also discussed.

Ir-Catalyzed Regio- and Enantioselective Hydroalkynylation of Trisubstituted Alkene to Access All-Carbon Quaternary Stereocenters

The stereoselective construction of all-carbon quaternary stereocenters, especially acyclic ones, represents an important challenge in organic synthesis. In particular, homopropargyl amides with a quaternary stereocenter β to a nitrogen atom are valuable synthetic intermediates, which could be transformed to diverse chiral structures through alkyne transformations. However, highly enantioselective synthetic methods for homopropargyl amides with a β quaternary stereocenter are extremely rare. We report here unprecedented substrate-directed, iridium-catalyzed enantioselective hydroalkynylations of trisubstituted alkenes to form an acyclic all-carbon quaternary stereocenter β to a nitrogen atom. The hydroalkynylation of enamide occurred with unconventional selectivity, favoring the more hindered reaction site. Homopropargyl amides with β-stereocenters were prepared in high regio- and enantioselectivities. Combined experimental and computational studies revealed the origin of the regio- and enantioselectivities.

Regio- and Stereoselective Functionalization Enabled by Bidentate Directing Groups

Chelation-assisted C-H bond and alkene functionalization using bidentate directing groups offers an elegant and versatile approach to overcome regiocontrol issues by allowing the catalyst to come into close proximity with the targeted sites. In this personal account, we highlight our recent works in developing regio- and stereocontrolled functionalizations through transition-metal catalysis enabled by bidentate directing groups. We classify our results into two categories: (1) regioselective alkene functionalization using bidentate directing groups, and (2) asymmetric C-H functionalization using chiral bidentate directing groups. Furthermore, density functional theory studies to elucidate the origin of the regio- and stereoselectivity exerted by bidentate directing groups are discussed.

The Synthesis of Biarylmonophosphonates via Palladium-Catalyzed Phosphonation, Iridium-Catalyzed C-H Borylation, Palladium-Catalyzed Suzuki–Miyaura Cross-Coupling

Abstract

The iridium-catalyzed C-H borylation of diethyl phenylphosphonate results in nonselective mono and bisborylation to afford a near statistical mixture of 3-, 3,5- and 4-boryl substituted aryl phosphonates whereas 3-substituted aryl phosphonates undergo highly regioselective C-H borylation to afford the corresponding meta-phosphonate substituted arylboronic esters as the sole product; the resulting boronic esters were used as nucleophilic reagents in a subsequent palladium-catalyzed Suzuki–Miyaura cross-coupling to generate a range of biarylmonophosphonates. Gratifyingly, the Suzuki–Miyaura cross-coupling can be conducted without purifying the boronic ester which greatly simplifies the synthetic procedure.

Graphical Abstract

Ligand-Driven Advances in Iridium-Catalyzed sp3 C–H Borylation: 2,2′-Dipyridylarylmethane

The field of catalytic C–H borylation has grown considerably since its founding, providing a means for the preparation of synthetically versatile organoborane products. Although sp2 C–H borylation methods have found widespread and practical use in organic synthesis, the analogous sp3 C–H borylation reaction remains challenging and has seen limited application. Existing catalysts are often hindered by incomplete consumption of the diboron reagent, poor functional-group tolerance, harsh reaction conditions, and the need for excess or neat substrate. These challenges acutely affect the C–H borylation chemistry of unactivated hydrocarbon substrates, which has lagged in comparison to methods for the C–H borylation of activated compounds. Herein, we discuss recent advances in the sp3 C–H borylation of undirected substrates in the context of two particular challenges: (1) utilization of the diboron reagent and (2) the need for excess or neat substrate. Our recent work on the application of dipyridylarylmethane ligands in sp3 C–H borylation has allowed us to make contributions in this space and has presented an additional ligand scaffold to supplement traditional phenanthroline ligands.

Phosphine-Directed sp3 C-H, C-O, and C-N Borylation

Benzylic C-H borylation reactions are limited, requiring new approaches to exploit their reactivity for efficient selective functionalization. The recent development of phosphine-directed C-H borylation of arenes has now been extended to benzylic substrates, providing high yield of the mono- and geminal bis-borylation products. Attempts to borylate the C-H bond α to a benzylic ether or amine resulted in C-O and C-N borylation, followed by C-H borylation to provide geminal bis-borylated products.

Metal-free photoinduced C(sp3)-H borylation of alkanes

Boronic acids and their derivatives are some of the most useful reagents in the chemical sciences¹, with applications spanning pharmaceuticals, agrochemicals and functional materials. Catalytic C-H borylation is a powerful method for introducing these and other boron groups into organic molecules because it can be used to directly functionalize C-H bonds of feedstock chemicals without the need for substrate pre-activation^1-3. These reactions have traditionally relied on precious-metal catalysts for C-H bond cleavage and, as a result, display high selectivity for borylation of aromatic C(sp²)-H bonds over aliphatic C(sp³)-H bonds⁴. Here we report a mechanistically distinct, metal-free borylation using hydrogen atom transfer catalysis⁵, in which homolytic cleavage of C(sp³)-H bonds produces alkyl radicals that are borylated by direct reaction with a diboron reagent. The reaction proceeds by violet-light photoinduced electron transfer between an N-alkoxyphthalimide-based oxidant and a chloride hydrogen atom transfer catalyst. Unusually, stronger methyl C-H bonds are borylated preferentially over weaker secondary, tertiary and even benzylic C-H bonds. Mechanistic studies indicate that the high methyl selectivity is a result of the formation of a chlorine radical-boron 'ate' complex that selectively cleaves sterically unhindered C-H bonds. By using a photoinduced hydrogen atom transfer strategy, this metal-free C(sp³)-H borylation enables unreactive alkanes to be transformed into valuable organoboron reagents under mild conditions and with selectivities that contrast with those of established metal-catalysed protocols.

Methane Borylation Catalyzed by Ru, Rh, and Ir Complexes in Comparison with Cyclohexane Borylation: Theoretical Understanding and Prediction

Methane borylation catalyzed by Cp*M(Bpin)_n (M = Ru or Rh; HBpin = pinacolborane; n = 2 or 3) and (TMPhen)Ir(Bpin)₃ (TMPhen = 3,4,7,8-tetramethyl-1,10-phenanthroline) was investigated by DFT in comparison with cyclohexane borylation. Because Ru-catalyzed borylation has not been theoretically investigated yet, its reaction mechanism was first elucidated; Cp*Ru(Bpin)₃ 1-Ru is an active species, and Cp*Ru(Bpin)₃(H)(CH₃) 4-Ru is a key intermediate. In 4-Ru, the Ru is understood to have an ambiguous oxidation state between +IV and +VI because it has a H··Bpin bonding interaction with a bond order of about 0.5. Methane borylation occurs through oxidative addition of methane C-H bond followed by reductive elimination of borylmethane in all of these catalysts. The catalytic activity for methane borylation increases following the order Cp*Ru(Bpin)₃ < (TMPhen)Ir(Bpin)₃ < Cp*Rh(Bpin)₂. Cyclohexane borylation occurs in the same mechanism except for the presence of isomerization of a key intermediate. Chemoselectivity of methane over cyclohexane increases following the order Ir < Ru < Rh. In all of these catalysts, the rate-determining step (RDS) of cyclohexane borylation needs a larger ΔG°^‡ than the RDS of methane borylation because the more bulky cyclohexyl group induces larger steric repulsion with the ligand than methyl. One reason for the worse chemoselectivity of the Ir catalyst is its less congested transition state of the reductive elimination of borylcyclohexane. Herein, use of a strongly electron-donating ligand consisting of pyridine and N-heterocyclic carbene with bulky substituents is computationally proposed as a good ligand for the Ir catalyst; actually, the Ir complex of this ligand is calculated to be more active and more chemoselective than Cp*Rh(Bpin)₂ for methane borylation.

Diverse functionalization of strong alkyl C-H bonds by undirected borylation

The selective functionalization of strong, typically inert carbon-hydrogen (C-H) bonds in organic molecules is changing synthetic chemistry. However, the undirected functionalization of primary C-H bonds without competing functionalization of secondary C-H bonds is rare. The borylation of alkyl C-H bonds has occurred previously with this selectivity, but slow rates required the substrate to be the solvent or in large excess. We report an iridium catalyst ligated by 2-methylphenanthroline with activity that enables, with the substrate as limiting reagent, undirected borylation of primary C-H bonds and, when primary C-H bonds are absent or blocked, borylation of strong secondary C-H bonds. Reactions at the resulting carbon-boron bond show how these borylations can lead to the installation of a wide range of carbon-carbon and carbon-heteroatom bonds at previously inaccessible positions of organic molecules.

Iridium-Catalyzed sp3 C-H Borylation in Hydrocarbon Solvent Enabled by 2,2'-Dipyridylarylmethane Ligands

Iridium-catalyzed alkane C-H borylation has long suffered from poor atom economy, resulting from both the inclusion of only 1 equiv of boron from the diboron reagent and a requirement for neat substrate. An appropriately substituted dipyridylarylmethane ligand was found to give highly active alkane borylation catalysts that facilitate C-H borylation with improved efficiency. This system provides for complete consumption of the diboron reagent, producing 2 molar equivalents of product at low catalyst loadings. The superior efficacy of this system also enables borylation of unactivated alkanes in hydrocarbon solvent with a reduced excess of substrate and improved functional group compatibility. The effectiveness of this ligand is displayed across a selection of functional groups, both under traditional borylation conditions in neat substrate and under atypical conditions in cyclohexane solvent. The utility of this catalytic system is exemplified by the borylation of substrates containing polar functionality, which are unreactive toward C-H borylation under neat conditions.

Iridium(I)-Catalyzed α-C(sp3)-H Alkylation of Saturated Azacycles

Saturated azacycles are commonly encountered in bioactive compounds and approved therapeutic agents. The development of methods for functionalization of the α-methylene C-H bonds of these highly privileged building blocks is of great importance, especially in drug discovery. While much effort has been dedicated toward this goal by using a directed C-H activation approach, the development of directing groups that are both general as well as practical remains a significant challenge. Herein, the design and development of novel amidoxime directing groups is described for Ir(I)-catalyzed α-C(sp³)-H alkylation of saturated azacycles using readily available olefins as coupling partners. This protocol extends the scope of saturated azacycles to piperidines, azepane, and tetrahydroisoquinoline that are incompatible with our previously reported directing group. A variety of olefin coupling partners, including previously unreactive disubstituted terminal olefins and internal olefins, are compatible with this transformation. The selectivity for a branched α-C(sp³)-alkylation product is also observed for the first time when acrylate is used as the reaction partner. The development of practical, one-step installation and removal protocols further adds to the utility of amidoxime directing groups.

Effect of Ligand Structure on the Electron Density and Activity of Iridium Catalysts for the Borylation of Alkanes

An in-depth study of iridium catalysts for the borylation of alkyl C-H bonds is reported. Although the borylation of aryl C-H bonds can be catalyzed by iridium complexes containing phen or bpy ligands at mild temperatures and with limiting arene, the borylation of alkyl C-H bonds remains underdeveloped. We prepared a library of phenanthrolines that contain varying substitution patterns. The corresponding phen-Ir trisboryl carbon monoxide complexes were synthesized to determine the electron-donating ability of these ligands, and the initial rates for the borylation of the C-H bonds in THF and diethoxyethane β to oxygen catalyzed by Ir complexes containing these ligands were measured. For some subsets of these ligands, the donor ability correlated positively with the rate of C-H borylation catalyzed by the complexes containing ligands within a given subset. However, across subsets, ligands possessing similar donor properties to one another form catalysts for the borylation of alkyl C-H bonds with widely varying activity. This phenomenon was investigated computationally, and it was discovered that the stabilizing interactions between the phenanthroline ligand and the boryl ligands attached to Ir in the transition state for C-H oxidative addition could account for the differences in the activity of the catalysts that possess similar electron densities at Ir. The effect of these interactions on the borylation of secondary alkyl C-H bonds is larger than it is on the borylation of primary alkyl C-H bonds.

Computational understanding of catalyst-controlled borylation of fluoroarenes: directed vs. undirected pathway

In this work, density functional theory (DFT) calculations are performed to understand the origin of the regioselective C–H borylation of aromatics catalyzed by Co(i)/^iPrPNP and Ir(iii)/dtbpy (4,4-di-tert-butyl bipyridine).

Catalytic C(sp3)-H bond activation in tertiary alkylamines

The development of robust catalytic methods to assemble tertiary alkylamines provides a continual challenge to chemical synthesis. In this regard, transformation of a traditionally unreactive C-H bond, proximal to the nitrogen atom, into a versatile chemical entity would be a powerful strategy for introducing functional complexity to tertiary alkylamines. A practical and selective metal-catalysed C(sp³)-H activation facilitated by the tertiary alkylamine functionality, however, remains an unsolved problem. Here, we report a Pd(II)-catalysed protocol that appends arene feedstocks to tertiary alkylamines via C(sp³)-H functionalization. A simple ligand for Pd(II) orchestrates the C-H activation step in favour of deleterious pathways. The reaction can use both simple and complex starting materials to produce a range of multifaceted γ-aryl tertiary alkylamines and can be rendered enantioselective. The enabling features of this transformation should be attractive to practitioners of synthetic and medicinal chemistry as well as in other areas that use biologically active alkylamines.

Boryl-Directed, Ir-Catalyzed C(sp3)-H Borylation of Alkylboronic Acids Leading to Site-Selective Synthesis of Polyborylalkanes

Pyrazolylaniline serves as a temporary directing group attached to the boron atom of alkylboronic acids in Ir-catalyzed C(sp³)-H borylation. The reaction takes place at α-, β-, and γ-C-H bonds, giving polyborylated products including di-, tri-, tetra-, and even pentaborylalkanes. α-C-H borylation was generally found to be the preferred reaction of primary alkylboronic acid derivatives, whereas β- or γ-borylation also occurred if β- or γ-C-H bonds were located on the methyl group.