Platinum-Tin Oxide Core–Shell Catalysts for Efficient Electro-Oxidation of Ethanol

Diverse Hierarchical Meso/Nanoporous Pt Film Electrocatalysts Prepared via Hydrogen Adsorption-Assisted Dynamic Soft Templating

In this study, we present an innovative approach for creating hierarchical meso/nanoporous Pt films using dynamic soft templating. The fabrication process, called dynamic soft templating, involves Pt electrodeposition within a specialized bicontinuous microemulsion (BME) system characterized by a sophisticated three-dimensional network comprising water and oil phases, surfactants, and cosurfactants. Pt electrodeposition exclusively occurs in the water phase of the BME. This results in a porous Pt film exhibiting a nanostructure mirroring the oil solution/water solution nanostructure (solution/solution structure) of the BME, the size of which can be tailored by adjusting the BME composition. Through a simultaneous interplay of Pt electrodeposition and overpotential deposition of hydrogen (H-OPD, dissociative adsorption of water), potential-dependent Pt mesostructures are dynamically shaped. As a result, we achieve diverse morphologies in the form of hierarchical meso/nanoporous Pt films. The potential applications of the films are evaluated as electrocatalysts for the methanol oxidation reaction (MOR), and it was found that the electrocatalytic performances seem to be sensitive to nanoporosity and not relevant to mesoporosity.

Alkali Metal Cation-Sulfate Anion Ion Pairs Promoted the Cleavage of C-C Bond During Ethanol Electrooxidation

Direct ethanol fuel cells show great promise as a means of converting biomass ethanol derived from biomass into electricity. However, the efficiency of complete conversion is hindered by the low selectivity in breaking the C-C bond. This selectivity is determined by factors such as the material structure and reaction conditions, including the nature of the supporting electrolyte. Cations serve not only as facilitators of electricity conduction through ion migration but also as influencers of the reaction pathways. In this study, we utilized differential electrochemical mass spectrometry to track the in situ generation of CO2 during potential scanning. The presence of alkali cations led to an enhancement in the CO2 selectivity. In addition, in situ Raman spectroscopy provided evidence of the formation of alkali metal cation-sulfate anion ion pairs. The catalytic activity and CO2 selectivity were found to be directly correlated to the ionic strength of these ion pairs.

One-pot synthesis of PdPtAg porous nanospheres with enhanced electrocatalytic activity toward polyalcohol electrooxidation

Porous nanospheres (PNSs) have great development prospects in the electrocatalysis field because of their structural characteristics, such as a large specific surface area. However, it is still a challenge to find a simple and energy-saving method for the controllable synthesis of PNS nanocatalysts. In this paper, a one-pot CTAC-assisted strategy was developed for the successful formation of PdPtAg PNSs with high porosity at room temperature. Benefitting from the unique structures, optimized composition, acceleration of charge transfer and enhanced resistance to CO poisoning, the PdPtAg PNSs displayed considerably improved electrocatalytic performance with high mass activity and stability toward the ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). The EGOR and GOR mass activities of PdPtAg were 5.00 A mg_metal^-1 and 3.06 A mg_metal^-1, which are 6.22 and 1.91 times that of commercial Pd/C, respectively. This work is expected to offer a new path for improving catalytic performance by simple design and adjustment of morphology.

Trace Doping of Pb(OH)2 Species on PdPb Alloys Boost Highly Active and Stable Ethanol Oxidation

PdPb nanocrystals have drawn considerable attention due to their excellent catalytic properties, while their practical applications have been impeded by the severe degradation of activity, which is caused by the adsorption of intermediates (especially CO) during the operation. Herein, we first present porous PdPb alloys with the incorporation of amorphous Pb(OH)₂ species as highly active and stable electrocatalysts. Alloying Pd with Pb species is initially proposed to optimize the Pd-Pd interatomic distance and adjust the d-band center of Pd. Importantly, the amorphous Pb(OH)₂ species are beneficial to promoting the formation of OH_ad and the removal of CO_ad. Therefore, PdPb-Pb(OH)₂ catalysts show a mass activity of 3.18 A mg_Pd ^-1 and keep excellent stability for the ethanol oxidation reaction (EOR). In addition, further CO stripping and a series of CO poisoning experiments indicate that PdPb-Pb(OH)₂ composites possess much better CO tolerance benefiting from the tuned electronic structure of Pd and surface incorporation of Pb(OH)₂ species.

Tailoring Amorphous PdCu Nanostructures for Efficient C-C Cleavage in Ethanol Electrooxidation

The large-scale application of direct ethanol fuel cells has long been obstructed by the sluggish ethanol oxidation reaction at the anode. Current wisdom for designing and fabricating EOR electrocatalysts has been focused on crystalline materials, which result in only limited improvement in catalytic efficiency. Here, we report the amorphous PdCu (a-PdCu) nanomaterials as superior EOR electrocatalysts. The amorphization of PdCu catalysts can significantly facilitate the C-C bond cleavage, which thereby affords a C1 path faradic efficiency as high as 69.6%. Further tailoring the size and shape of a-PdCu nanocatalysts through the delicate kinetic control can result in a maximized mass activity up to 15.25 A/mg_Pd, outperforming most reported catalysts. Notably, accelerated durability tests indicate that both the isotropic structure and one-dimensional shape can dramatically enhance the catalytic durability of the catalysts. This work provides valuable guidance for the rational design and fabrication of amorphous noble metal-based electrocatalysts for fuel cells.

Pt-Sn alloy shells with tunable composition and structure on Au nanoparticles for boosting ethanol oxidation

Combining the core-shell structure with the optimization of surface composition and structure in the shell is a fantastic strategy to enhance the electrocatalytic performances. Here, we synthesized trimetallic Au@Pt_xSn_y core-shell nanoparticles (NPs) with tunable composition and structure of Pt-Sn alloyed shells. Impressively, the Au@PtSn core-shell NPs with hexagonal PtSn alloyed shells exhibited the highest mass activity and specific activity toward ethanol oxidation reaction (EOR) in alkaline electrolyte, which are 13.0 and 12.7 times higher than those of the commercial Pt/C. In addition, the Au@PtSn core-shell NPs displayed the best stability compared to commercial Pt/C, with only 44.8% loss vs. 86.8% loss in mass activity after 1,000 s due to the stronger anti-poisoning ability for reaction intermediates. The theory calculations reveal that the introduction of Au core and alloying Pt with Sn both endow Pt with an appropriate d-band center, and thus effectively boosting the EOR activity.

Mesoporous PdBi nanocages for enhanced electrocatalytic performances by all-direction accessibility and steric site activation

An effective yet simple approach was developed to synthesize mesoporous PdBi nanocages for electrochemical applications. This technique relies on the subtle utilization of the hydrolysis of a metal salt to generate precipitate cores in situ as templates for navigating the growth of mesoporous shells with the assistance of polymeric micelles. The mesoporous PdBi nanocages are then obtained by excavating vulnerable cores and regulating the crystals of mesoporous metallic skeletons. The resultant mesoporous PdBi nanocages exhibited excellent electrocatalytic performance toward the ethanol oxidation reaction with a mass activity of 3.56 A mg-1_Pd, specific activity of 17.82 mA cm-2 and faradaic efficiency of up to 55.69% for C1 products.

Controllable Synthesis of Platinum-Tin Intermetallic Nanoparticles with High Electrocatalytic Performance for Ethanol Oxidation

This article proposes a general approach for the preparation of intermetallic nanoparticles of Pt3Sn, PtSn, PtSn2, and PtSn4, triggered by hexamethyldisilazane (HMDS) in conjunction with SnCl2. The ethanol oxidation reaction...

Platinum-Tin/Tin Oxide/CNT Catalysts for High-Performance Electrocatalytic Ethanol Oxidation

Ethanol is a promising liquid clean energy source in the energy conversion field. However, the self-poisoning caused by the strongly adsorbed reaction intermediates (typically, CO) is a critical problem in ethanol oxidation reaction. To address this issue, we proposed a joint use of two strategies, alloying of Pt with other metals and building Pt/metal-oxide interfaces, to achieve high-performance electrocatalytic ethanol oxidation. For this, a well-designed synthetic route combining wet impregnation with a two-step thermal treatment process was established to construct PtSn/SnO_x interfaces on carbon nanotubes. Using this route, the alloying of Pt-Sn and formation of PtSn-SnO_x interfaces can simultaneously be achieved, and the coverage of SnO_x thin films on PtSn alloy nanoparticles can be facilely tuned by the strong interaction between Pt and SnO_x . The results revealed that the partial coverage of SnO_x species not only retained the active sites, but also enhanced the CO anti-poisoning ability of the catalyst. Consequently, the H-PtSn/SnO_x /CNT-2 catalyst with an optimized PtSn-SnO_x interface showed significantly improved performances toward the ethanol oxidation reaction (825 mA mg_Pt ^-1 ). This study provides deep insights into the structure-performance relationship of PtSn/metal oxide composite catalysts, which would be helpful for the future design and fabrication of high-performance Pt-based ethanol oxidation reaction catalysts.

Construction of Pd-Zn dual sites to enhance the performance for ethanol electro-oxidation reaction

Rational design and synthesis of superior electrocatalysts for ethanol oxidation is crucial to practical applications of direct ethanol fuel cells. Here, we report that the construction of Pd-Zn dual sites with well exposure and uniformity can significantly improve the efficiency of ethanol electro-oxidation. Through synthetic method control, Pd-Zn dual sites on intermetallic PdZn nanoparticles, Pd-Pd sites on Pd nanoparticles and individual Pd sites are respectively obtained on the same N-doped carbon coated ZnO support. Compared with Pd-Pd sites and individual Pd sites, Pd-Zn dual sites display much higher activity for ethanol electro-oxidation, exceeding that of commercial Pd/C by a factor of ~24. Further computational studies disclose that Pd-Zn dual sites promote the adsorption of ethanol and hydroxide ion to optimize the electro-oxidation pathway with dramatically reduced energy barriers, leading to the superior activity. This work provides valuable clues for developing high-performance ethanol electro-oxidation catalysts for fuel cells.

Pt3Sn nanoparticles enriched with SnO2/Pt3Sn interfaces for highly efficient alcohol electrooxidation

Pt₃Sn nanoparticles (NPs) enriched with Pt₃Sn/ultra-small SnO₂ interfaces (Pt₃Sn@u-SnO₂/NG) were synthesized through a thermal treatment of Pt₂Sn/NG in a H₂ atmosphere, followed by annealing under H₂ and air conditions. The unique structure of Pt₃Sn NPs enriched with Pt₃Sn/SnO₂ interfaces was observed on the Pt₃Sn@u-SnO₂/NG catalyst based on HRTEM. The optimized Pt₃Sn@u-SnO₂/NG catalyst achieves high catalytic activity with an ethanol oxidation reaction (EOR) activity of 366 mA mg_Pt ^-1 and a methanol oxidation reaction (MOR) activity of 503 mA mg_Pt ^-1 at the potential of 0.7 V, which are eight-fold and five-fold higher than those for the commercial Pt/C catalyst (44 and 99 mA mg_Pt ^-1, respectively). The Pt₃Sn@u-SnO₂/NG catalyst is found to be 3 times more stable and have higher CO tolerance than Pt/C. The outstanding performance of the Pt₃Sn@u-SnO₂/NG catalyst should be ascribed to the synergetic effect induced by the unique structure of Pt₃Sn NPs enriched with Pt₃Sn/SnO₂ interfaces. The synergetic effect between Pt₃Sn NPs and ultra-small SnO₂ increases the performance for alcohol oxidation because the Sn in both Pt₃Sn and SnO₂ favors the removal of CO_ads on the nearby Pt by providing OH_ads species at low potentials. The present work suggests that the Pt₃Sn@u-SnO₂ is indeed a unique kind of efficient electrocatalyst for alcohol electrooxidation.

Highly Porous Pt2Ir Alloy Nanocrystals as a Superior Catalyst with High-Efficiency C-C Bond Cleavage for Ethanol Electrooxidation

Achieving high catalytic performance with high CO₂ selectivity is critical for commercialization of direct ethanol fuel cells. Here, we report carbon-supported highly porous Pt₂Ir alloy nanocrystals (p-Pt₂Ir/C) for an ethanol oxidation reaction (EOR) that displays nearly 7.2-fold enhancement in mass activity and promotes antipoisoning ability and durability for the EOR as compared with the commercial Pt/C-JM. Moreover, the catalyst exhibits high CO₂ selectivity, 3.4-fold at 0.65 V (vs. SCE) and 4.1-fold at 0.75 V (vs. SCE) higher as compared with the carbon-supported porous Pt nanocrystals (p-Pt/C). The highly porous structure is composed of interconnected one-dimensional (1D) rough branches with an average diameter of only 1.9 nm, largely promoting Pt utilization efficiency and accelerating mass transfer. The 1D rough branch surface exposed many atomic steps/corners endowed with abundant high activity sites. Alloying with Ir can significantly improve the antipoisoning ability, durability, and C-C bond cleavage ability, thereby evidently enhancing its EOR performance.

Highly efficient blackberry-like trimetallic PdAuCu nanoparticles with optimized Pd content for ethanol electrooxidation

The rational design of highly efficient catalysts for ethanol electrooxidation is extremely challenging for developing direct ethanol fuel cells (DEFCs). Herein, a facile one-pot method has been developed to prepare blackberry-like PdAuCu nanoparticles (NPs) with tunable composition and surface structures. Among PdAuCu NPs with different Pd contents (1.6-22 mass%), PdAuCu NPs-0.5 (contained Pd at 2.5 mass%) delivered one of the highest catalytic activities of Pd-based catalysts towards ethanol electrooxidation, exhibiting a mass activity of 23.0 A mg_Pd^-1. Kinetic analysis, electrochemical impedance spectroscopy and CO stripping test results suggested that the excellent electrocatalytic activity may originate from the optimized balance between Pd content and surface structure of PdAuCu NPs-0.5. The optimization of the balance between composition and surface structure would contribute to the further design of multimetallic nanoparticles for fuel cells and other applications.

In situ observation of the crystal structure transition of Pt-Sn intermetallic nanoparticles during deactivation and regeneration

The mechanism of the deactivation and regeneration of PtSn intermetallic compound nanoparticle (iNP) catalysts was studied by in situ TEM investigation. Our study reveals the reversible dynamic structural transition of the iNPs during deactivation and regeneration, which provides a direct correlation between the atomic structure and the catalytic activity of the iNPs.

Contrasting the EXAFS obtained under air and H2 environments to reveal details of the surface structure of Pt-Sn nanoparticles

Understanding the surface structure of bimetallic nanoparticles is crucial for heterogeneous catalysis. Although surface contraction has been established in monometallic systems, less is known for bimetallic systems, especially of nanoparticles. In this work, the bond length contraction on the surface of bimetallic nanoparticles is revealed by XAS in H2 at room temperature on dealloyed Pt-Sn nanoparticles, where most Sn atoms were oxidized and segregated to the surface when measured in air. The average Sn-Pt bond length is found to be ∼0.09 Å shorter than observed in the bulk. To ascertain the effect of the Sn location on the decrease of the average bond length, Pt-Sn samples with lower surface-to-bulk Sn ratios than the dealloyed Pt-Sn were studied. The structural information specifically from the surface was extracted from the averaged XAS results using an improved fitting model combining the data measured in H2 and in air. Two samples prepared so as to ensure the absence of Sn in the bulk were also studied in the same fashion. The bond length of surface Sn-Pt and the corresponding coordination number obtained in this study show a nearly linear correlation, the origin of which is discussed and attributed to the poor overlap between the Sn 5p orbitals and the available orbitals of the Pt surface atoms.

Tuning intermediate adsorption in structurally ordered substituted PdCu3 intermetallic nanoparticles for enhanced ethanol oxidation reaction

Co and Ni-substituted structurally ordered intermetallic PdCu₃ nanoparticles (NPs) synthesized at low temperature exhibit remarkable enhancement of the ethanol electrooxidation (EOR) activity with improved durability. The first-principle calculations suggest that prompted generation of OH and CH₃CO radicals in close proximity and shifting of the d-band center towards the Fermi level boost the EOR efficiency.

Mechanistic Insights for Photoelectrochemical Ethanol Oxidation on Black Gold Decorated Monoclinic Zirconia

Surface decoration of metal oxides by metals for enhancing their electrocatalytic properties for organic conversions has attracted a lot of researchers' interest due to their high abundancy, inexpensiveness, and high stability. In the present work, a process for the synthesis of black gold (BG) using a citrate assisted chemical route and m-ZrO₂ by a hydrothermal method at 200 °C has been developed. Further, different concentrations of black gold are being used to decorate the surface of zirconia by exploitation of surface potential of zirconia and gold surfaces. The catalyst having 6 mol % concentration of black gold shows excellent electrocatalytic activity for ethanol oxidation with low oxidation peak potential (1.17 V) and high peak current density (8.54 mA cm^-2). The current density ratio (j_f/j_b) is also high (2.54) for this catalyst indicating its high tolerance toward poisoning by intermediate species generated during the catalytic cycle. The enhanced electrocatalytic activity can be attributed to the high tolerance of gold toward CO poisoning and high stability of the ZrO₂ support. The black gold decorated zirconia catalyst showed enhanced activity during photoelectrochemical studies when the entire spectrum of light falls on the catalyst. Ultrafast transient studies demonstrated plasmonic excitation of metallic free electrons and subsequent charge separation in the black gold-ZrO₂ heterointerface as the key factor for enhanced photoelectrocatalytic activity.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

One-step coating of Ni–Fe alloy outerwear on 1–3-dimensional nanomaterials by a novel technology

A simple one-step electrodeposition approach was developed to manufacture Ni–Fe alloy@1–3-dimensional core–shell nanomaterials using a novel technology.

One-step fabrication of CuO-doped TiO2 nanotubes enhanced the catalytic activity of Pt nanoparticles towards the methanol oxidation reaction in acid media

To meet the requirements for the potential applications of fuel cells, it is of vital importance to search for advanced electrocatalysts toward the methanol oxidation reaction that have both high electrocatalytic activity and great CO resistance.

A Phosphorus-Doped Ag@Pd Catalyst for Enhanced CC Bond Cleavage during Ethanol Electrooxidation

Ethanol is preferred to be oxidized into CO₂ for the construction of a high-performance direct ethanol fuel cell since this complete ethanol oxidation reaction (EOR) transfers 12 electrons. However, this EOR is sluggish and has the low activity as well as poor selectivity. To promote such a favorable EOR, more exactly the cleavage selectivity of CC bonds in ethanol, phosphorus-doped silver-core-and-Pd-shell catalysts (denoted as Ag@PdP) are designed and synthesized. In the alkaline media, a Ag@Pd₂ P_0.2 catalyst is superior toward EOR into CO₂ . It exhibits seven times higher mass activity and six times higher selectivity than the benchmark Pd/C catalyst. As confirmed by means of density functional theory calculation and in situ Fourier-transform infrared spectroscopy, such high performance stems from an increased adsorption energy of OH radicals on the Pd active sites. Meanwhile, the tensile strain effect of a core-shell structure of this Ag@Pd₂ P_0.2 catalyst favors the formation of adsorbed CH₃ CO intermediate, the key species for the enhanced C-C cleavage into CO₂ , instead of acetate. The proposed way to design and synthesize such high-performance EOR catalysts will explore the practical applications of direct alkaline ethanol fuel cells.

Au Nanoparticles Modified with Pt, Ru and SnO2 as Electrocatalysts for Ethanol Oxidation Reaction in Acids

The anodic reaction in direct ethanol fuel cells (DEFCs), ethanol oxidation reaction (EOR) faces challenges, such as incomplete electrooxidation of ethanol and high cost of the most efficient electrocatalyst, Pt in acidic media at low temperature. In this study, core-shell electrocatalysts with an Au core and Pt-based shell (Au@Pt) are developed. The Au core size and Pt shell thickness play an important role in the EOR activity. The Au size of 2.8 nm and one layer of Pt provide the most optimized performance, having 6 times higher peak current density in contrast to commercial Pt/C. SnO₂ as a support also enhances the EOR activity of Au@Pt by 1.73 times. Further modifying the Pt shell with Ru atoms achieve the highest EOR current density that is 15 and 2.5 times of Pt/C and Au@Pt. Our results suggest the importance of surface modification in rational design of advanced electrocatalysts.

The Ethanol Oxidation Reaction Performance of Carbon-Supported PtRuRh Nanorods

In this study, carbon-supported Pt-based catalysts, including PtRu, PtRh, and PtRuRh nanorods (NRs), were prepared by the formic acid reduction method for ethanol oxidation reaction (EOR) application. The aspect ratio of all experimental NRs is 4.6. The X-ray photoelectron spectroscopy and H2-temperature-programmed reduction results confirm that the ternary PtRuRh has oxygen-containing species (OCS), including PtOx, RuOx and RhOx, on its surface and shows high EOR current density at 0.6 V. The corresponding physical structure results indicate that the surface OCS can enhance the adsorption of ethanol through bi-functional mechanism and thereby promote the EOR activity. On the other hand, the chronoamperometry (CA) results imply that the ternary PtRuRh has the highest mass activity, specific activity, and stability among all catalysts. The aforementioned pieces of evidence reveal that the presence of OCS facilitates the oxidation of adsorbed intermediates, such as CO or CHx, which prevents the Pt active sites from poisoning and thus simultaneously improves the current density and durability of PtRuRh NRs in EOR.

Polymer fiber membrane-based direct ethanol fuel cell with Ni-doped SnO2 promoted Pd/C catalyst

The PFM-based DEFC with as-prepared Pd/Ni–SnO₂/C as the anode catalyst and porous NiCo₂O₄ as the cathode catalyst delivers encouraging properties.

Interfacial Engineering in PtNiCo/NiCoS Nanowires for Enhanced Electrocatalysis and Electroanalysis

Searching for new anti-poisoning Pt-based catalysts with enhanced activity for alcohol oxidation is the key in direct alcohol fuel cells (DAFCs). However, in the traditional strategy for designing bimetallic or multimetallic alloy is still difficult to achieve a satisfactory heterogeneous electrocatalyst because the activity often depends on only the surface atoms. Herein, we fabricate the multicomponent active sites by creating a sulfide structure on 1D PtNiCo trimetallic nanowires (NWs), to give a PtNiCo/NiCoS interface NWs (IFNWs). Owing to the presence of sulfide interfaces, the PtNiCo/NiCoS IFNWs enable an impressive methanol/ethanol oxidation reaction (MOR/EOR) performance and excellent anti-CO poisoning tolerance. They have the MOR and EOR mass activities of 2.25 Amg^-1 _Pt and 1.62 Amg^-1 _Pt , around 1.26, 3.21 and 1.46, 2.96 times higher than those of PtNiCo NWs and commercial Pt/C, respectively. CO-stripping and XPS measurements further demonstrate that the new interfacial structure and optimal bonding of Pt-CO can result in accelerating the removal of surface adsorbed carbonaceous intermediates. Moreover, such a unique structure has also demonstrated a much-improved ability for the electrochemical detection of some important molecules (H₂ O₂ and NH₂ NH₂ ).

From bimetallic PdCu nanowires to ternary PdCu-SnO2 nanowires: Interface control for efficient ethanol electrooxidation

At present, although a large number of palladium-based nanowire electrocatalysts have been prepared, there are few reports on nanowires containing rich metal oxides. Herein, porous PdCu alloy nanowires and PdCu-SnO₂ nanowires were prepared by using a galvanic displacement synthesis method. Due to their one-dimensional structure, rough surfaces with non-homogeneous edges, electronic effect, and the advanced PdCu/SnO₂ interface of the as-synthesized PdCu-SnO₂ nanowire catalysts, they exhibited a mass activity of 7770.0 mA mg^-1 towards ethanol oxidation, which was 7.6-fold higher than that of Pd/C catalysts (1025.0 mA mg^-1). In addition, they behaved strong durability upon chronoamperometry and continuous cyclic voltammetry tests. The electrochemical measurements demonstrated that SnO₂ was introduced into the PdCu/SnO₂ interface, which promoted the oxidation of ethanol at a lower potential and accelerated the oxidation of Pd-CO_ads via SnO₂-OH_ads to regenerate the active sites. This research highlights the significance of introducing metal oxides into the nanostructure interface, and the performance of Pd-containing catalysts towards ethanol oxidation reaction was greatly improved.

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro-oxidation of Liquid Fuels

Efficient electro-oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂ . Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀ -structure and Au segregates on the surface to alloy with Pt. The L1₀ -structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro-oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt , 1.49 A/mg_Pt , and 11.97 A/mg_Pt , respectively in 0.1 m HClO₄ . The L1₀ -CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface-enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C-C bond more efficiently for ethanol oxidation.

Spectroscopy Identification of the Bimetallic Surface of Metal-Organic Framework-Confined Pt-Sn Nanoclusters with Enhanced Chemoselectivity in Furfural Hydrogenation

Research and development in bimetallic nanoparticles have gained great interest over their monometallic counterparts because of their distinct and unique properties in a wide range of applications such as catalysis, energy storage, and bio/plasmonic imaging. Identification and characterization of these bimetallic surfaces for application in heterogeneous catalysis remain a challenge and heavily rely on advanced characterization techniques such as aberration-corrected electron microscopy and synchrotron X-ray absorption studies. In this article, we have reported a strategy to prepare sub-2 nm bimetallic Pt-Sn nanoclusters confined in the pores of a Zr-based metal-organic framework (MOF). The Pt-Sn nanoclusters encapsulated in the Zr-MOF pores show enhanced chemoselectivity from 51 to 93% in an industrially relevant reaction, furfural hydrogenation to furfuryl alcohol. The presence of bimetallic Pt-Sn surfaces was investigated by a surface-sensitive characterization technique utilizing diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO to probe the bimetallic surface of the encapsulated ultrafine Pt-Sn nanocluster. Complementary techniques such as aberration-corrected high-angle annular dark-field scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were also used to characterize the Pt-Sn nanoclusters.

Preparation of Pt-skin PtRhNi Nanoframes Decorated with Small SnO2 Nanoparticles as an Efficient Catalyst for Ethanol Oxidation Reaction

Pt-based nanoframes are one of the most promising catalysts for ethanol oxidation reaction in direct ethanol fuel cells. It is important to understand the mechanisms responsible for creating these hollow nanoframe-based catalysts. Herein, for the first time, Pt-skin PtRhNi rhombic dodecahedral nanoframes were decorated with small SnO₂ nanoparticles and were used as an efficient catalyst for the ethanol oxidation reaction. Moreover, by combining the ex situ scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy observations at various stages of synthesis, along with density functional theory calculations, it was possible to track the synthesis route of solid rhombic dodecahedral PtRhNi nanoparticles, which are the precursors of PtRhNi nanoframes. After the chemical etching of the Ni core from solid PtRhNi nanoparticles, the obtained nanoframes were decorated with SnO₂ nanoparticles. The resulting SnO₂@PtRhNi heteroaggregates were deposited on high-surface-area carbon and electrochemically tested, showing a 6-fold higher mass activity and 10-fold higher specific activity toward ethanol oxidation reaction than commercially available Pt catalysts.

Nanocatalysts for Electrocatalytic Oxidation of Ethanol

The use of ethanol as a fuel in direct alcohol fuel cells depends not only on its ease of production from renewable sources, but also on overcoming the challenges of storage and transportation. In an ethanol-based fuel cell, highly active electrocatalysts are required to break the C-C bond in ethanol for its complete oxidation at lower overpotentials, with the aim of increasing the cell performance, ethanol conversion rates, and fuel efficiency. In recent decades, the development of wet-chemistry methods has stimulated research into catalyst design, reactivity tailoring, and mechanistic investigations, and thus, created great opportunities to achieve efficient oxidation of ethanol. In this Minireview, the nanomaterials tested as electrocatalysts for the ethanol oxidation reaction in acid or alkaline environments are summarized. The focus is mainly on nanomaterials synthesized by using wet-chemistry methods, with particular attention on the relationship between the chemical and physical characteristics of the catalysts, for example, catalyst composition, morphology, structure, degree of alloying, presence of oxides or supports, and their activity for ethanol electro-oxidation. As potential alternatives to noble metals, non-noble-metal catalysts for ethanol oxidation are also briefly reviewed. Insights into further enhancing the catalytic performance through the design of efficient electrocatalysts are also provided.

Ultrathin PtNiM (M = Rh, Os, and Ir) Nanowires as Efficient Fuel Oxidation Electrocatalytic Materials

The development of new electrocatalysts with high activity and durability for alcohol oxidation is an emerging need of direct alcohol fuel cells. However, the commonly used Pt-based catalysts still exhibit drawbacks including limited catalytic activity, high overpotential, and severe CO poisoning. Here a general approach is reported for preparing ultrathin PtNiM (M = Rh, Os, and Ir) nanowires (NWs) with excellent anti-CO-poisoning ability and high activity. Owing to their superior nanostructure and optimal electronic interaction, the ultrathin PtNiM NWs show enhanced electrocatalytic performance for both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The optimal PtNiRh NWs show mass activity of 1.72 A mg^-1 and specific activity of 2.49 mA cm^-2 for MOR, which are 3.17 and 2.79 times higher than those of Pt/C. In particular, the onset potentials of PtNiRh NWs for MOR and EOR shift down by about 65 and 85 mV compared with those of Pt/C. Density functional theory calculations further verify their high antipoison properties for MOR and EOR from both an electronic and energetic perspective. Facilitated by the introduction of Rh and Ni, the stable pinning of the Pt 5d band associated with electron-rich and depletion centers solves the dilemma between reactivity and anti-CO poisoning.

Shape-control of one-dimensional PtNi nanostructures as efficient electrocatalysts for alcohol electrooxidation

Bimetallic one-dimensional (1D) nanostructures such as nanowires (NWs) and nanorods (NRs), serving as high-efficiency anode electrocatalysts, have attracted extensive attention in the past decade. However, the precise design and synthesis of 1D Pt-based nanocrystals with tunable morphology and size still remain an arduous challenge. Driven by this, we report a facile yet efficient strategy for the first time to prepare PtNi ultrafine NWs (UNWs), sinuous NWs (SNWs) and ultrashort NRs (UNRs) by adjusting the amount of citric acid, ascorbic acid and glucose. Detailed analysis of their electrocatalytic properties has indicated that the as-obtained PtNi SNWs exhibit the most outstanding electrocatalytic activity toward ethylene glycol oxidation reaction (EGOR) and glycerol oxidation (GOR), 4.5 and 4.3 times higher in mass activity as well as 4.3 and 3.9 times higher in specific activity compared with the commercial Pt/C catalyst. The as-prepared PtNi SNWs are also more stable than the commercial Pt/C catalyst after successive durability tests. The proposed method provides insight into more rational designs of bimetallic nanocatalysts with 1D architectures and the as-synthesized PtNi catalysts with improved electrocatalytic performance assist in promoting the further development of direct alcohol fuel cells (DAFCs).