Oxygen-atom transfer reactivity of axially ligated Mn(V)-oxo complexes: evidence for enhanced electrophilic and nucleophilic pathways

Shift of the reduction potential of nickel(II) Schiff base complexes in the presence of redox innocent metal ions

With the objective of gaining insight into the modulation of the reduction potential of the Ni(II/I) couple, we have synthesized two mononuclear nickel(II) complexes, NiLen (H2Len = N,N'-bis(3-methoxysalicylidene)-1,2-diamino-2-methylpropane) and NiLpn (H2Lpn = N,N'-bis(3-methoxysalicylidene)-1,3-diamino-2,2-dimethylpropane) of two N2O4 donor ligands and recorded their cyclic voltammograms. Both the nickel complexes show reversible reduction processes for the Ni(II/I) couple in acetonitrile solution but the reduction potential of NiLpn (E1/2 = -1.883 V) is 188 mV more positive than that of NiLen (E1/2 = -2.071 V). In the presence of redox inactive metal ions (Li+, Na+, K+, Mg2+, Ca2+ and Ba2+), the reduction potentials are shifted by 49-331 mV and 99-435 mV towards positive values compared to NiLen and NiLpn, respectively. The shift increases with the decrease of the pKa of the respective aqua-complexes of the metal ion but is poorly co-linear; however, better linearity is found when the shift of the mono- and bi-positive metal ion aqua complexes is plotted separately. Spectrophotometric titrations of these two nickel complexes with the guest metal ions in acetonitrile showed a well-anchored isosbestic point in all cases, confirming the adduct formation of NiLen and NiLpn with the metal ions. Structural analysis of single crystals, [(NiLen)Li(H2O)2]·ClO4 (1), [(NiLpn)Li(H2O)]·ClO4 (2), [(NiLpn)2Na]·BF4 (3) and [(NiLpn)2Ba(H2O)(ClO4)]·ClO4 (4), also corroborates the heterometallic adduct formation. The orbital energies of the optimised heterometallic adducts from which electron transfers originated were calculated in order to explain the observed reduction process. A strong linear connection between the calculated orbital energies and the experimental E1/2 values was observed. According to MEP and 2D vector field plots, the largest shift for divalent metal ions is most likely caused by the local electric field that they impose in addition to Lewis acidity.

Generation, Characterization and Reactivity of a High-Valent Mononuclear Cobalt(IV)-Diazide Complex

High-valent Fe(IV)=O intermediates of metalloenzymes have inspired numerous efforts to generate synthetic analogs to mimic and understand their substrate oxidation reactivities. However, high-valent M(IV) complexes of late transition metals are rare. We have recently reported a novel Co(IV)-dinitrate complex (1-NO3) that activates sp3 C-H bonds up to 87 kcal/mol. In this work, we have shown that the nitrate ligands in 1-NO3 can be replaced by azide, a more basic coordinating base, resulting in the formation of a more potent Co(IV)-diazide species (1-N3) that reacts with substrates (hydrocarbons and phenols) at faster rate constants and activates stronger C-H bonds than the parent complex 1-NO3. We have characterized 1-N3 employing a combination of spectroscopic and computational approaches. Our results clearly show that the coordination of azide leads to the modulation of the Co(IV) electronic structure and the Co(IV/III) redox potential. Together with the higher basicity of azide, these thermodynamic parameters contribute to the higher driving forces of 1-N3 than 1-NO3 for C-H bond activation. Our discoveries are thus insightful for designing more reactive bio-inspired high-valent late transition metal complexes for activating inert aliphatic hydrocarbons.

Carbon redirection via tunable Fenton-like reactions under nanoconfinement toward sustainable water treatment

The ongoing pattern shift in water treatment from pollution control to energy recovery challenges the energy-intensive chemical oxidation processes that have been developed for over a century. Redirecting the pathways of carbon evolution from molecular fragmentation to polymerization is critical for energy harvesting during chemical oxidation, yet the regulation means remain to be exploited. Herein, by confining the widely-studied oxidation system-Mn3O4 catalytic activation of peroxymonosulfate-inside amorphous carbon nanotubes (ACNTs), we demonstrate that the pathways of contaminant conversion can be readily modulated by spatial nanoconfinement. Reducing the pore size of ACNTs from 120 to 20 nm monotonously improves the pathway selectivity toward oligomers, with the yield one order of magnitude higher under 20-nm nanoconfinement than in bulk. The interactions of Mn3O4 with ACNTs, reactant enrichment, and pH lowering under nanoconfinement are evidenced to collectively account for the enhanced selectivity toward polymerization. This work provides an adaptive paradigm for carbon redirection in a variety of catalytic oxidation processes toward energy harvesting and sustainable water purification.

Amphoteric reactivity of a putative Cu(II)-mCPBA intermediate

In copper-based enzymes, Cu-hydroperoxo/alkylperoxo species are proposed as key intermediates for their biological activity. A vast amount of literature is available on the functional and structural mimics of enzymatic systems with heme and non-heme ligand frameworks to stabilize high valent metal intermediates, mostly at low temperatures. Herein, we report a reaction between [CuI(NCCH3)4]+ and meta-chloroperoxybenzoic acid (mCPBA) in CH3CN that produces a putative CuII(mCPBA) species (1). 1 was characterized by UV/Vis, resonance Raman, and EPR spectroscopies. 1 can catalyze both electrophilic and nucleophilic reactions, demonstrating its amphoteric behavior. Additionally, 1 can also conduct electron transfer reactions with a weak reducing agent such as diacetyl ferrocene, making it one of the reactive copper-based intermediates. One of the most important aspects of the current work is the easy synthesis of a CuII(mCPBA) adduct with no complicated ligands for stabilization. Over time, 1 decays to form a CuII paddle wheel complex (2) and is found to be unreactive towards substrate oxidation.

Reactivity umpolung (reversal) of ligands in transition metal complexes

The success and power of homogeneous catalysis derives in large part from the wide choice of transition metal ions and their ligands. This tutorial review introduces examples where the reactivity of a ligand is completely reversed (umpolung) from Lewis basic/nucleophilic to acidic/electrophilic or vice versa on changing the metal and co-ligands. Understanding this phenomenon will assist in the rational design of catalysts and the understanding of metalloenzyme mechanisms. Labelling a metal and ligand with Seebach donor and acceptor labels helps to identify whether a reaction involving the intermolecular attack on the ligand is displaying native reactivity or reactivity umpolung. This has been done for complexes of nitriles, carbonyls, isonitriles, dinitrogen, Fischer carbenes, alkenes, alkynes, hydrides, methyls, methylidenes and alkylidenes, silylenes, oxides, imides/nitrenes, alkylidynes, methylidynes, and nitrides. The electronic influence of the metal and co-ligands is discussed in terms of the energy of (HOMO) d electrons. The energy can be related to the pKLACa (LAC is ligand acidity constant) of the theoretical hydride complexes [H-[M]-L]+ formed by the protonation of pair of valence d electrons on the metal in the [M-L] complex. Preliminary findings indicate that a negative pKLACa indicates that nucleophilic attack by a carbanion or amine on the ligand will likely occur while a positive pKLACa indicates that electrophilic attack by strong acids on the ligand will usually occur when the ligand is nitrile, carbonyl, isonitrile, alkene and η6-arene.

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Untangling ancillary ligand donation versus locus of oxidation effects on metal nitride reactivity

We detail the relative role of ancillary ligand electron-donating ability in comparison to the locus of oxidation (either metal or ligand) on the electrophilic reactivity of a series of oxidized Mn salen nitride complexes. The electron-donating ability of the ancillary salen ligand was tuned via the para-phenolate substituent (R = CF3, H, tBu, OiPr, NMe2, NEt2) in order to have minimal effect on the geometry at the metal center. Through a suite of experimental (electrochemistry, electron paramagnetic resonance spectroscopy, UV-vis-NIR spectroscopy) and theoretical (density functional theory) techniques, we have demonstrated that metal-based oxidation to [MnVI(SalR)N]+ occurs for R = CF3, H, tBu, OiPr, while ligand radical formation to [MnV(SalR)N]+˙ occurs with the more electron-donating substituents R = NMe2, NEt2. We next investigated the reactivity of the electrophilic nitride with triarylphosphines to form a MnIV phosphoraneiminato adduct and determined that the rate of reaction decreases as the electron-donating ability of the salen para-phenolate substituent is increased. Using a Hammett plot, we find a break in the Hammett relation between R = OiPr and R = NMe2, without a change in mechanism, consistent with the locus of oxidation exhibiting a dominant effect on nitride reactivity, and not the overall donating ability of the ancillary salen ligand. This work differentiates between the subtle and interconnected effects of ancillary ligand electron-donating ability, and locus of oxidation, on electrophilic nitride reactivity.

Tuning Reactivity of Zr-Substituted Keggin Phosphotungstate in Alkene Epoxidation through Balancing H2O2 Activation Pathways: Unusual Effect of Base

The Zr-monosubstituted Keggin-type dimeric phosphotungstate (Bu4N)8[{PW11O39Zr(μ-OH)(H2O)}2] (1) efficiently catalyzes epoxidation of C═C bonds in various kinds of alkenes, including terminal ones, with aqueous H2O2 as oxidant. Less sterically hindered double bonds are preferably epoxidized despite their lower nucleophilicity. Basic additives (Bu4NOH) in the amount of 1 equiv per dimer 1 suppress H2O2 unproductive decomposition, increase substrate conversion, improve yield of heterolytic oxidation products and oxidant utilization efficiency, and also affect regioselectivity of epoxidation, enhancing oxygen transfer to sterically hindered electron-rich C═C bonds. Acid additives produce a reverse effect on the substrate conversion and H2O2 efficiency. The reaction mechanism was explored using a range of test substrates, kinetic, and spectroscopic tools. The opposite effects of acid and base additives on alkene epoxidation and H2O2 degradation have been rationalized in terms of their impact on hydrolysis of 1 to form monomeric species, [PW11O39Zr(OH)(H2O)x]4- (1-M, x = 1 or 2), which favors H2O2 homolytic decomposition. The interaction of 1 with H2O2 has been investigated by HR-ESI-MS, ATR-FT-IR, and 31P NMR spectroscopic techniques. The combination of spectroscopic studies and kinetic modeling implicated the existence of two types of dimeric peroxo complexes, [Zr2(μ-η2:η2-O2){PW11O39}2(H2O)x]]8- and [{Zr(μ-η2-O2)}2(PW11O39)2(H2O)y]10-, along with monomeric Zr (hydro)peroxo species that begin to dominate at a high excess of H2O2. Both dimeric μ-η2-peroxo intermediates are inert toward alkenes under stoichiometric conditions. V-shape Hammett plots obtained for epoxidation of p-substituted styrenes suggested a biphilic nature of the active oxidizing species, which are monomeric Zr-hydroperoxo and peroxo species. Small basic additives increase the electrophilicity of the catalyst and decrease its nucleophilicity. HR-ESI-MS has identified a dimeric, most likely, bridging hydroperoxo species [{PW11O39Zr}2(μ-O)(μ-OOH)]9-, which may account for the improved epoxidation selectivity and regioselectivity toward sterically hindered C═C bonds.

Permanganate activation with Mn oxides at different oxidation states: Insight into the surface-promoted electron transfer mechanism

The development of new strategies to improve the removal of organic pollutants with permanganate (KMnO₄) is a hot topic in water treatment. While Mn oxides have been extensively used in Advanced Oxidation Processes through an electron transfer mechanism, the field of KMnO₄ activation remains relatively unexplored. Interestingly, this study has discovered that Mn oxides with high oxidation states including γ-MnOOH, α-Mn₂O₃ and α-MnO₂, exhibited excellent performance to degrade phenols and antibiotics in the presence of KMnO₄. The MnO₄^- species initially formed stable complexes with the surface Mn(III/IV) species and showed an increased oxidation potential and electron transfer reactivity, caused by the electron-withdrawing capacity of the Mn species acting as Lewis acids. Conversely, for MnO and γ-Mn₃O₄ with Mn(II) species, they reacted with KMnO₄ to produce cMnO₂ with very low activity for phenol degradation. The direct electron transfer mechanism in α-MnO₂/KMnO₄ system was further confirmed through the inhibiting effect of acetonitrile and the galvanic oxidation process. Moreover, the adaptability and reusability of α-MnO₂ in complicated waters indicated its potential for application in water treatment. Overall, the findings shed light on the development of Mn-based catalysts for organic pollutants degradation via KMnO₄ activation and understanding of the surface-promoted mechanism.

Electrochemical Properties and Reactivity Study of [MnV(O)(μ-OR-Lewis Acid)] Cores

A mononuclear manganese(V) oxo complex of a bis(amidate)bis(alkoxide) ligand, (NMe₄)[Mn^V(HMPAB)(O)] [2; H₄HMPAB = 1,2-bis(2-hydroxy-2-methylpropanamido)benzene], was synthesized and structurally characterized. A Mn-O_term distance of 1.566(4) Å was observed in the solid-state structure of 2, consistent with the Mn≡O formulation. The reaction of redox-inactive metal ions (Mⁿ⁺ = Li⁺, Ca²⁺, Mg²⁺, Y³⁺, and Sc³⁺) with 2 resulted in the formation of 2-Mⁿ⁺ species, which were characterized by UV-vis, ¹H NMR, cyclic voltammetry, and in situ IR spectroscopy. Theoretical calculations suggested that the alkoxide oxygen atoms of the ligand scaffold are energetically most favorable for coordinating the Mⁿ⁺ ions in 2. Complex 2 revealed one-electron-reduction potential at -0.01 V versus ferrocenium/ferrocene, which shifted anodically upon coordination of Mⁿ⁺ ions to 2, and such a shift became more prominent with stronger Lewis acids. The oxygen-atom transfer (OAT) reactivities of 2 and 2-Mⁿ⁺ species with triphenylphosphine were compared, which exhibited a systematic increase of the reaction rate with increasing Lewis acidity of Mⁿ⁺ ions, and a plot of log k₂ versus Lewis acidity of Mⁿ⁺ ions (ΔE) followed a linear relationship. It was observed that 2-Sc³⁺ was ca. 3200 times more reactive toward the OAT reaction compared to 2. Hammett analysis of 2 exhibited a V-shaped plot, indicating a change of the reaction mechanism upon going from electron-rich to electron-deficient Ar₃P substrates. In contrast, 2-Ca²⁺ and 2-Sc³⁺ showed an electrophilic nature toward the OAT reaction, thus demonstrating the role of the Lewis acid in controlling the OAT mechanism. The hydrogen-atom abstraction reaction of 2 and 2-Mⁿ⁺ adducts with 1-benzyl-1,4-dihydronicotinamide was investigated, and it was observed that the rate of reaction did not vary considerably with the Lewis acidity of Mⁿ⁺ ions. On the basis of Eyring analysis of 2 and 2-Mⁿ⁺ adducts, we hypothesized an entropy-controlled hydrogen-atom-transfer reaction for 2-Sc³⁺, which is different from the reaction mechanism of 2 and 2-Ca²⁺.

Structure and Reactivity of a Manganese(VI) Nitrido Complex Bearing a Tetraamido Macrocyclic Ligand

Manganese complexes in +6 oxidation state are rare. Although a number of Mn(VI) nitrido complexes have been generated in solution via one-electron oxidation of the corresponding Mn(V) nitrido species, they are too unstable to isolate. Herein we report the isolation and the X-ray structure of a Mn(VI) nitrido complex, [Mn^VI(N)(TAML)]^- (2), which was obtained by one-electron oxidation of [Mn^V(N)(TAML)]^2- (1). 2 undergoes N atom transfer to PPh₃ and styrenes to give Ph₃P═NH and aziridines, respectively. A Hammett study for various p-substituted styrenes gives a V-shaped plot; this is rationalized by the ability of 2 to function as either an electrophile or a nucleophile. 2 also undergoes hydride transfer reactions with NADH analogues, such as 10-methyl-9,10-dihydroacridine (AcrH₂) and 1-benzyl-1,4-dihydronicotinamide (BNAH). A kinetic isotope effect of 7.3 was obtained when kinetic studies were carried out with AcrH₂ and AcrD₂. The reaction of 2 with NADH analogues results in the formation of [Mn^V(N)(TAML-H⁺)]^- (3), which was characterized by ESI/MS, IR spectroscopy, and X-ray crystallography. These results indicate that this reaction occurs via an initial "separated CPET" (separated concerted proton-electron transfer) mechanism; that is, there is a concerted transfer of 1 e^- + 1 H⁺ from AcrH₂ (or BNAH) to 2, in which the electron is transferred to the Mn^VI center, while the proton is transferred to a carbonyl oxygen of TAML rather than to the nitrido ligand.

Experimental and Computational Studies on the Ruthenium-Catalyzed Dehydrative C-H Coupling of Phenols with Aldehydes for the Synthesis of 2-Alkylphenol, Benzofuran, and Xanthene Derivatives

The cationic Ru-H complex [(C₆H₆)(PCy₃)(CO)RuH]⁺BF₄^- (1) was found to be an effective catalyst for the dehydrative C-H coupling reaction of phenols and aldehydes to form 2-alkylphenol products. The coupling reaction of phenols with branched aldehydes selectively formed 1,1-disubstituted benzofurans, while the coupling reaction with salicylaldehydes yielded xanthene derivatives. A normal deuterium isotope effect was observed from the coupling reaction of 3-methoxyphenol with benzaldehyde and 2-propanol/2-propanol-d₈ (k_H/k_D = 2.3 ± 0.3). The carbon isotope effect was observed on the benzylic carbon of the alkylation product from the coupling reaction of 3-methoxyphenol with 4-methoxybenzaldehyde (C(3) 1.021(3)) and on both benzylic and ortho-arene carbons from the coupling reaction with 4-trifluorobenzaldehdye (C(2) 1.017(3), C(3) 1.011(2)). The Hammett plot from the coupling reaction of 3-methoxyphenol with para-substituted benzaldehydes p-X-C₆H₄CHO (X = OMe, Me, H, F, Cl, CF₃) displayed a V-shaped linear slope. Catalytically relevant Ru-H complexes were observed by NMR from a stoichiometric reaction mixture of 1, 3-methoxyphenol, benzaldehyde, and 2-propanol in CD₂Cl₂. The DFT calculations provided a detailed catalysis mechanism featuring an electrophilic aromatic substitution of the aldehyde followed by the hydrogenolysis of the hydroxy group. The calculations also revealed a mechanistic rationale for the strong electronic effect of the benzaldehdye substrates p-X-C₆H₄CHO (X = OMe, CF₃) in controlling the turnover-limiting step. The catalytic C-H coupling method provides an efficient synthetic protocol for 2-alkylphenols, 1,1-disubstituted benzofurans, and xanthene derivatives without employing any reactive reagents or forming wasteful byproducts.

Combined Experimental and Theoretical Study of the Competitive Absorption of CO2 and NO2 by a Superbase Ionic Liquid

A superbase ionic liquid (IL), trihexyltetradecylphosphonium benzimidazolide ([P66614][Benzim]), is investigated for the capture of CO2 in the presence of NO2 impurities. The effect of the waste gas stream contaminant on the ability of the IL to absorb simultaneously CO2 is demonstrated using novel measurement techniques, including a mass spectrometry breakthrough method and in situ infrared spectroscopy. The findings show that the presence of an industrially relevant concentration of NO2 in a combined feed with CO2 has the effect of reducing the capacity of the IL to absorb CO2 efficiently by ∼60% after 10 absorption-desorption cycles. This finding is supported by physical property analysis (viscosity, 1H and 13C NMR, and X-ray photoelectron spectroscopy) and spectroscopic infrared characterization, in addition to density functional theory (DFT) calculations, to determine the structure of the IL-NO2 complex. The results are presented in comparison with another flue gas component, NO, demonstrating that the absorption of NO2 is more favorable, thereby hindering the ability of the IL to absorb CO2. Significantly, this work aids understanding of the effects that individual components of flue gas have on CO2 capture sorbents, through studying a contaminant that has received limited interest previously.

Mechanistic insight into oxygen atom transfer reactions by mononuclear manganese(IV)-oxo adducts

High-valent metal-oxo intermediates are well known to facilitate oxygen-atom transfer (OAT) reactions both in biological and synthetic systems. These reactions can occur by a single-step OAT mechanism or by a stepwise process initiated by rate-limiting electron transfer between the substrate and the metal-oxo unit. Several recent reports have demonstrated that changes in the metal reduction potential, caused by the addition of Brønsted or Lewis acids, cause a change in sulfoxidation mechanism of MnIV-oxo complexes from single-step OAT to the multistep process. In this work, we sought to determine if ca. 4000-fold rate variations observed for sulfoxidation reactions by a series of MnIV-oxo complexes supported by neutral, pentadentate ligands could arise from a change in sulfoxidation mechanism. We examined the basis for this rate variation by performing variable-temperature kinetic studies to determine activation parameters for the reactions of the MnIV-oxo complexes with thioanisole. These data reveal activation barriers predominantly controlled by activation enthalpy, with unexpectedly small contributions from the activation entropy. We also compared the reactivity of these MnIV-oxo complexes by a Hammett analysis using para-substituted thioanisole derivatives. Similar Hammett ρ values from this analysis suggest a common sulfoxidation mechanism for these complexes. Because the rates of oxidation of the para-substituted thioanisole derivatives by the MnIV-oxo adducts are much faster than that expected from the Marcus theory of outer-sphere electron-transfer, we conclude that these reactions proceed by a single-step OAT mechanism. Thus, large variations in sulfoxidation by this series of MnIV-oxo centers occur without a change in reaction mechanism.

Mechanistic insights into dioxygen activation by a manganese corrole complex: a broken-symmetry DFT study

The Mn–oxygen species have been implicated as key intermediates in various Mn-mediated oxidation reactions. However, artificial oxidants were often used for the synthesis of the Mn–oxygen intermediates. Remarkably, the Mn(v)–oxo and Mn(iv)–peroxo species have been observed in the activation of O₂ by Mn(iii) corroles in the presence of base (OH⁻) and hydrogen donors. In this work, density functional theory methods were used to get insight into the mechanism of dioxygen activation and formation of Mn(v)–oxo. The results demonstrated that the dioxygen cannot bind to Mn without the axial OH⁻ ligand. Upon the addition of the axial OH⁻ ligand, the dioxygen can bind to Mn in an end-on fashion to give the Mn(iv)–superoxo species. The hydrogen atom transfer from the hydrogen donor (substrate) to the Mn(iv)–superoxo species is the rate-limiting step, having a high reaction barrier and a large endothermicity. Subsequently, the O–C bond formation is concerted with an electron transfer from the substrate radical to the Mn and a proton transfer from the hydroperoxo moiety to the nearby N atom of the corrole ring, generating an alkylperoxo Mn(iii) complex. The alkylperoxo O–O bond cleavage affords a Mn(v)–oxo complex and a hydroxylated substrate. This novel mechanism for the Mn(v)–oxo formation via an alkylperoxo Mn(iii) intermediate gives insight into the O–O bond activation by manganese complexes.

DFT calculations revealed a novel mechanism for the formation of Mn(v)–oxo in the dioxygen activation by a Mn(iii) corrole complex involving a Mn(iii)–alkylperoxo intermediate.

Opening the CoIII,IV2(μ-O)2 Diamond Core by Lewis Bases Leads to Enhanced C-H Bond Cleaving Reactivity

The high-valent diiron(IV) intermediate Q is the key oxidant that cleaves strong C-H bonds of methane in the catalytic cycle of soluble methane monooxygenase (sMMO). sMMO-Q was previously reported as a bis-μ-oxo Fe^IV₂(μ-O)₂ diamond core but was recently described to have an open core with a long Fe···Fe distance. We recently reported a high-valent Co^III,IV₂(μ-O)₂ diamond core complex (1) that is highly reactive with sp³ C-H bonds. In this work, we demonstrated that the C-H bond cleaving reactivity of 1 can be further enhanced by introducing a Lewis base X, affording faster kinetic rate constants and the ability to cleave stronger C-H bonds compared to 1. We proposed that 1 first reacts with X in a fast equilibrium to form an open core species X-Co^III-O-Co^IV-O (1-X). We were able to characterize 1-X using EPR spectroscopy and DFT calculations. 1-X exhibited an S = 1/2 EPR signal distinct from that of the parent complex 1. DFT calculations showed that 1-X has an open core with the spin density heavily delocalized in the Co^IV-O unit. Moreover, 1-X has a more favorable thermodynamic driving force and a smaller activation barrier than 1 to carry out C-H bond activation reactions. Notably, 1-X is at least 4 orders of magnitude more reactive than its diiron open core analogues. Our findings indicate that the diamond core isomerization is likely a practical enzymatic strategy to unmask the strong oxidizing power of sMMO-Q necessary to attack the highly inert C-H bonds of methane.

Unprecedented Reactivities of Highly Reactive Manganese(III)-Iodosylarene Porphyrins in Oxidation Reactions

We report that Mn(III)-iodosylarene porphyrins, [Mn^III(Porp)(^sArIO)]⁺, are capable of activating the C-H bonds of hydrocarbons, including unactivated alkanes such as cyclohexane, with unprecedented reactivities, such as a low kinetic isotope effect, a saturation behavior of reaction rates, and no electronic effect of porphyrin ligands on the reactivities of [Mn^III(Porp)(^sArIO)]⁺. In oxygen atom transfer (OAT) reactions, the sulfoxidation of para-X-substituted thioanisoles by [Mn^III(Porp)(^sArIO)]⁺ affords a very unusual behavior in the Hammett plot with the saturation behavior of reaction rates and no electronic effect of porphyrin ligands on reactivities. The reactivities and mechanisms of [Mn^III(Porp)(^sArIO)]⁺ are then compared with those of the corresponding Mn^IV(Porp)(O) complex. The present study reports the first example of highly reactive Mn(III)-iodosylarene porphyrins with unprecedented reactivities in C-H bond activation and OAT reactions.

Epoxidation Catalyzed by the Nonheme Iron(II)- and 2-Oxoglutarate-Dependent Oxygenase, AsqJ: Mechanistic Elucidation of Oxygen Atom Transfer by a Ferryl Intermediate

Mechanisms of enzymatic epoxidation via oxygen atom transfer (OAT) to an olefin moiety is mainly derived from the studies on thiolate-heme containing epoxidases, such as cytochrome P450 epoxidases. The molecular basis of epoxidation catalyzed by nonheme-iron enzymes is much less explored. Herein, we present a detailed study on epoxidation catalyzed by the nonheme iron(II)- and 2-oxoglutarate-dependent (Fe/2OG) oxygenase, AsqJ. The native substrate and analogues with different para substituents ranging from electron-donating groups (e.g., methoxy) to electron-withdrawing groups (e.g., trifluoromethyl) were used to probe the mechanism. The results derived from transient-state enzyme kinetics, Mössbauer spectroscopy, reaction product analysis, X-ray crystallography, density functional theory calculations, and molecular dynamic simulations collectively revealed the following mechanistic insights: (1) The rapid O2 addition to the AsqJ Fe(II) center occurs with the iron-bound 2OG adopting an online-binding mode in which the C1 carboxylate group of 2OG is trans to the proximal histidine (His134) of the 2-His-1-carboxylate facial triad, instead of assuming the offline-binding mode with the C1 carboxylate group trans to the distal histidine (His211); (2) The decay rate constant of the ferryl intermediate is not strongly affected by the nature of the para substituents of the substrate during the OAT step, a reactivity behavior that is drastically different from nonheme Fe(IV)-oxo synthetic model complexes; (3) The OAT step most likely proceeds through a stepwise process with the initial formation of a C(benzylic)-O bond to generate an Fe-alkoxide species, which is observed in the AsqJ crystal structure. The subsequent C3-O bond formation completes the epoxide installation.

Reactivity patterns of vanadium(iv/v)-oxo complexes with olefins in the presence of peroxides: a computational study

Vanadium porphyrin complexes are naturally occurring substances found in crude oil and have been shown to have medicinal properties as well. Little is known on their activities with substrates; therefore, we decided to perform a detailed density functional theory study on the properties and reactivities of vanadium(iv)- and vanadium(v)-oxo complexes with a TPPCl8 or 2,3,7,8,12,13,17,18-octachloro-meso-tetraphenylporphyrinato ligand system. In particular, we investigated the reactivity of [VV(O)(TPPCl8)]+ and [VIV(O)(TPPCl8)] with cyclohexene in the presence of H2O2 or HCO4-. The work shows that vanadium(iv)-oxo and vanadium(v)-oxo are sluggish oxidants by themselves and react with olefins slowly. However, in the presence of hydrogen peroxide, these metal-oxo species can be transformed into a side-on vanadium-peroxo complex, which reacts with substrates more efficiently. Particularly with anionic axial ligands, the side-on vanadium-peroxo and vanadium-oxo complexes produced epoxides from cyclohexene via small barrier heights. In addition to olefin epoxidation, we investigated aliphatic hydroxylation mechanisms by the same oxidants and some oxidants show efficient and viable cyclohexene hydroxylation mechanisms. The work implies that vanadium-oxo and vanadium-peroxo complexes can react with double bonds through epoxidation, and under certain conditions also undergo hydroxylation, but the overall reactivity is highly dependent on the equatorial ligand, the local environment and the presence or absence of anionic axial ligands.

Advances in Sustainable Catalysis: A Computational Perspective

The enormous challenge of moving our societies to a more sustainable future offers several exciting opportunities for computational chemists. The first principles approach to "catalysis by design" will enable new and much greener chemical routes to produce vital fuels and fine chemicals. This prospective outlines a wide variety of case studies to underscore how the use of theoretical techniques, from QM/MM to unrestricted DFT and periodic boundary conditions, can be applied to biocatalysis and to both homogeneous and heterogenous catalysts of all sizes and morphologies to provide invaluable insights into the reaction mechanisms they catalyze.

Reduction of CO2 by a masked two-coordinate cobalt(i) complex and characterization of a proposed oxodicobalt(ii) intermediate

Fixation and chemical reduction of CO2 are important for utilization of this abundant resource, and understanding the detailed mechanism of C-O cleavage is needed for rational development of CO2 reduction methods. Here, we describe a detailed analysis of the mechanism of the reaction of a masked two-coordinate cobalt(i) complex, L tBuCo (where L tBu = 2,2,6,6-tetramethyl-3,5-bis[(2,6-diisopropylphenyl)imino]hept-4-yl), with CO2, which yields two products of C-O cleavage, the cobalt(i) monocarbonyl complex L tBuCo(CO) and the dicobalt(ii) carbonate complex (L tBuCo)2(μ-CO3). Kinetic studies and computations show that the κN,η6-arene isomer of L tBuCo rearranges to the κ2 N,N' binding mode prior to binding of CO2, which contrasts with the mechanism of binding of other substrates to L tBuCo. Density functional theory (DFT) studies show that the only low-energy pathways for cleavage of CO2 proceed through bimetallic mechanisms, and DFT and highly correlated domain-based local pair natural orbital coupled cluster (DLPNO-CCSD(T)) calculations reveal the cooperative effects of the two metal centers during facile C-O bond rupture. A plausible intermediate in the reaction of CO2 with L tBuCo is the oxodicobalt(ii) complex L tBuCoOCoL tBu, which has been independently synthesized through the reaction of L tBuCo with N2O. The rapid reaction of L tBuCoOCoL tBu with CO2 to form the carbonate product indicates that the oxo species is kinetically competent to be an intermediate during CO2 cleavage by L tBuCo. L tBuCoOCoL tBu is a novel example of a thoroughly characterized molecular cobalt-oxo complex where the cobalt ions are clearly in the +2 oxidation state. Its nucleophilic reactivity is a consequence of high charge localization on the μ-oxo ligand between two antiferromagnetically coupled high-spin cobalt(ii) centers, as characterized by DFT and multireference complete active space self-consistent field (CASSCF) calculations.

A Manganese(V)-Oxo Tetraamido Macrocyclic Ligand (TAML) Cation Radical Complex: Synthesis, Characterization, and Reactivity Studies

A mononuclear manganese(V)-oxo complex with tetraamido macrocyclic ligand (TAML), [Mn^V (O)(TAML)]^- (1), is a sluggish oxidant in oxidation reactions. Herein, a mononuclear manganese(V)-oxo TAML cation radical complex, [Mn^V (O)(TAML^+. )] (2), is reported. It was synthesized by reacting [Mn^III (TAML)]^- with 3.0 equivalents of [Ru^III (bpy)₃ ]³⁺ or upon addition of one-electron oxidant to 1 and then characterized thoroughly with various spectroscopic techniques along with DFT calculations. Although 1 is a sluggish oxidant, 2 is a strong oxidant capable of activating C-H bonds of hydrocarbons (i.e., hydrogen atom transfer reaction) and transferring its oxygen atom to thioanisoles and olefins (i.e., oxygen atom transfer reaction).

Mn-Mimochrome VI*a: An Artificial Metalloenzyme With Peroxygenase Activity

Manganese-porphyrins are important tools in catalysis, due to their capability to promote a wide variety of synthetically valuable transformations. Despite their great reactivity, the difficulties to control the reaction selectivity and to protect the catalyst from self-degradation hamper their practical application. Compared to small-molecule porphyrin complexes, metalloenzymes display remarkable features, because the reactivity of the metal center is finely modulated by a complex interplay of interactions within the protein matrix. In the effort to combine the catalytic potential of manganese porphyrins with the unique properties of biological catalysts, artificial metalloenzymes have been reported, mainly by incorporation of manganese-porphyrins into native protein scaffolds. Here we describe the spectroscopic and catalytic properties of Mn-Mimochrome VI*a (Mn-MC6*a), a mini-protein with a manganese deuteroporphyrin active site within a scaffold of two synthetic peptides covalently bound to the porphyrin. Mn-MC6*a is an efficient catalyst endowed with peroxygenase activity. The UV-vis absorption spectrum of Mn-MC6*a resembles that of Mn-reconstituted horseradish peroxidase (Mn-HRP), both in the resting and high-valent oxidized states. Remarkably, Mn-MC6*a shows a higher reactivity compared to Mn-HRP, because higher yields and chemoselectivity were observed in thioether oxidation. Experimental evidences also provided indications on the nature of the high-valent reactive intermediate and on the sulfoxidation mechanism.

Benzoate Cyclometalation Enables Oxidative Addition of Haloarenes at a Ru(II) Center

The first Ru(II)-catalyzed arylation of substrates without a directing group was recently developed. Remarkably, this process only worked in the presence of a benzoate additive, found to be crucial for the oxidative addition step at Ru(II). However, the exact mode of action of the benzoate was unknown. Herein, we disclose a mechanistic study that elucidates the key role of the benzoate salt in the C–H arylation of fluoroarenes with aryl halides. Through a combination of rationally designed stoichiometric experiments and DFT studies, we demonstrate that the aryl–Ru(II) species arising from initial C–H activation of the fluoroarene undergoes cyclometalation with the benzoate to generate an anionic Ru(II) intermediate. The enhanced lability of this intermediate, coupled with the electron-rich anionic Ru(II) metal center renders the oxidative addition of the aryl halide accessible. The role of an additional (NMe₄)OC(CF₃)₃ additive in facilitating the overall arylation process is also shown to be linked to a shift in the C–H pre-equilibrium associated with benzoate cyclometalation.

Incorporation of redox-inactive cations promotes iron catalyzed aerobic C-H oxidation at mild potentials

The synthesis and characterization of the Schiff base complexes Fe(ii) (2M) and Fe(iii)Cl (3M), where M is a K+ or Ba2+ ion incorporated into the ligand, are reported. The Fe(iii/ii) redox potentials are positively shifted by 440 mV (2K) and 640 mV (2Ba) compared to Fe(salen) (salen = N,N'-bis(salicylidene)ethylenediamine), and by 70 mV (3K) and 230 mV (3Ba) compared to Fe(Cl)(salen), which is likely due to an electrostatic effect (electric field) from the cation. The catalytic activity of 3M towards the aerobic oxidation of allylic C-H bonds was explored. Prior studies on iron salen complexes modified through conventional electron-donating or withdrawing substituents found that only the most oxidizing derivatives were competent catalysts. In contrast, the 3M complexes, which are significantly less oxidizing, are both active. Mechanistic studies comparing 3M to Fe(salen) derivatives indicate that the proximal cation contributes to the overall reactivity in the rate determining step. The cationic charge also inhibits oxidative deactivation through formation of the corresponding Fe2-μ-oxo complexes, which were isolated and characterized. This study demonstrates how non-redox active Lewis acidic cations in the secondary coordination sphere can be used to modify redox catalysts in order to operate at milder potentials with a minimal impact on the reactivity, an effect that was unattainable by tuning the catalyst through traditional substituent effects on the ligand.

Kinetics and mechanistic studies on the formation and reactivity of high valent MnO porphyrin species: mono-ortho or para-substituted porphyrins versus a di-ortho-substituted one

High valent Mn(O) species of a series of electron-rich and -deficient meso-tetra(aryl)porphyrins (aryl = phenyl, 2-Cl-phenyl, 2-nitrophenyl, 2-Me-phenyl, 2-Br-phenyl, 2,6-di-Cl-phenyl 4-OMe-phenyl, 4-Me-phenyl, 4-Cl-phenyl and 4-pyridyl) were prepared at 273 K.

Involvement of high-valent manganese-oxo intermediates in oxidation reactions: realisation in nature, nano and molecular systems

Manganese plays multiple role in many biological redox reactions in which it exists in different oxidation states from Mn(II) to Mn(IV). Among them the high-valent manganese-oxo intermediate plays important role in the activity of certain enzymes and lessons from the natural system provide inspiration for new developments of artificial systems for a sustainable energy supply and various organic conversions. This review describes recent advances and key lessons learned from the nature on high-valent Mn-oxo intermediates. Also we focus on the elemental science developed from the natural system, how the novel strategies are realised in nano particles and molecular sites at heterogeneous and homogeneous reaction conditions respectively. Finally, perspectives on the utilisation of the high-valent manganese-oxo species towards other organic reactions are proposed.

Biomimetic Reactivity of Oxygen-Derived Manganese and Iron Porphyrinoid Complexes

Heme proteins utilize the heme cofactor, an iron porphyrin, to perform a diverse range of reactions including dioxygen binding and transport, electron transfer, and oxidation/oxygenations. These reactions share several key metalloporphyrin intermediates, typically derived from dioxygen and its congeners such as hydrogen peroxide. These species are composed of metal-dioxygen, metal-superoxo, metal-peroxo, and metal-oxo adducts. A wide variety of synthetic metalloporphyrinoid complexes have been synthesized to generate and stabilize these intermediates. These complexes have been studied to determine the spectroscopic features, structures, and reactivities of such species in controlled and well-defined environments. In this Review, we summarize recent findings on the reactivity of these species with common porphyrinoid scaffolds employed for biomimetic studies. The proposed mechanisms of action are emphasized. This Review is organized by structural type of metal-oxygen intermediate and broken into subsections based on the metal (manganese and iron) and porphyrinoid ligand (porphyrin, corrole, and corrolazine).

The pKa value of the proximal water molecule trans to a high-valent MnVO porphyrin: towards the control of reactivity by pH

In water, the protonation state of the proximal water molecule of a high-valent manganese-oxo porphyrin could be controlled by pH. While in interaction with DNA the porphyrin was able to cleave DNA, only when the proximal water molecule was in the form of a hydroxyl group.

Lewis-Acid-assisted Hydrogen Atom Transfer to Manganese(V)-Oxo Corrole through Valence Tautomerization

The kinetics of formation of the valence tautomers (tpfc^⋅)Mn^IV(O−LA)]ⁿ⁺ [where LA=Zn^II, Ca^II, Sc^III, Yb^III, B(C₆F₅)₃, and trifluoroacetic acid (TFA); tpfc=5,10,15‐tris(pentafluorophenyl) corrole] from (tpfc)Mn^V(O) were followed by UV/Vis spectroscopy, giving second‐order rate constants ranging over five orders of magnitude from 10⁻² for Ca to 10³  m⁻¹ s⁻¹ for Sc. Hydrogen atom transfer (HAT) rates from 2,4‐di‐tert‐butyl phenol (2,4‐DTBP) to the various Lewis acid valence tautomers of manganese oxo corrole complexes were evaluated and compared. For LA=TFA, Sc^III, or Yb^III, the rate constants of HAT were comparable to unactivated (tpfc)Mn^V(O). However, with LA=B(C₆F₅)₃, Zn^II, and Ca^II, 6‐, 21‐, and 31‐fold rate enhancements were observed, respectively. Remarkably, [(tpfc^⋅)Mn^IV(OCa)]²⁺ gave the most enhancement despite its rate of formation being the slowest. Comparisons of HAT rate constants among the various Lewis acid tautomers revealed that both size and charge are important. This study underscores how valence may affect the reactivity of high‐valent manganese‐oxo compounds and sheds light on nature's choice of Ca in the activation of Mn‐oxo in the oxygen‐evolving complex.

Singlet versus Triplet Reactivity in an Mn(V)-Oxo Species: Testing Theoretical Predictions Against Experimental Evidence

Discerning the factors that control the reactivity of high-valent metal-oxo species is critical to both an understanding of metalloenzyme reactivity and related transition metal catalysts. Computational studies have suggested that an excited higher spin state in a number of metal-oxo species can provide a lower energy barrier for oxidation reactions, leading to the conclusion that this unobserved higher spin state complex should be considered as the active oxidant. However, testing these computational predictions by experiment is difficult and has rarely been accomplished. Herein, we describe a detailed computational study on the role of spin state in the reactivity of a high-valent manganese(V)-oxo complex with para-Z-substituted thioanisoles and utilize experimental evidence to distinguish between the theoretical results. The calculations show an unusual change in mechanism occurs for the dominant singlet spin state that correlates with the electron-donating property of the para-Z substituent, while this change is not observed on the triplet spin state. Minimum energy crossing point calculations predict small spin-orbit coupling constants making the spin state change from low spin to high spin unlikely. The trends in reactivity for the para-Z-substituted thioanisole derivatives provide an experimental measure for the spin state reactivity in manganese-oxo corrolazine complexes. Hence, the calculations show that the V-shaped Hammett plot is reproduced by the singlet surface but not by the triplet state trend. The substituent effect is explained with valence bond models, which confirm a change from an electrophilic to a nucleophilic mechanism through a change of substituent.

Electrophilic and nucleophilic pathways in ligand oxide mediated reactions of phenylsulfinylacetic acids with oxo(salen)chromium(V) complexes

The mechanism of oxidative decarboxylation of phenylsulfinylacetic acids (PSAA) by oxo(salen)Cr(V)⁺ ion in the presence of ligand oxides has been studied spectrophotometrically in acetonitrile medium. Addition of ligand oxides (LO) causes a red shift in the λ _max values of oxo(salen) complexes and an increase in absorbance with the concentration of LO along with a clear isobestic point. The reaction shows first-order dependence on oxo(salen)-chromium(V)⁺ ion and fractional-order dependence on PSAA and ligand oxide. Michaelis-Menten kinetics without kinetic saturation was observed for the reaction. The order of reactivity among the ligand oxides is picoline N-oxide > pyridine N-oxide > triphenylphosphine oxide. The low catalytic activity of TPPO was rationalized. Both electron-withdrawing and electron-donating substituents in the phenyl ring of PSAA facilitate the reaction rate. The Hammett plots are non-linear upward type with negative ρ value for electron-donating substituents, (ρ ^- = -0.740 to -4.10) and positive ρ value for electron-withdrawing substituents (ρ ⁺ = +0.057 to +0.886). Non-linear Hammett plot is explained by two possible mechanistic scenarios, electrophilic and nucleophilic attack of oxo(salen)chromium(V)⁺-LO adduct on PSAA as the substituent in PSAA is changed from electron-donating to electron-withdrawing. The linearity in the log k vs. E _ox plot confirms single-electron transfer (SET) mechanism for PSAAs with electron-donating substituents.

The Influence of Peripheral Substituent Modification on P(V), Mn(III), and Mn(V)(O) Corrolazines: X-ray Crystallography, Electrochemical and Spectroscopic Properties, and HAT and OAT Reactivities

The influence of remote peripheral substitution on the physicochemical properties and reactivity of phosphorus and manganese corrolazine (Cz) complexes was examined. The substitution of p-MeO for p-t-Bu groups on the eight phenyl substituents of the β-carbon atoms of the Cz ring led to changes in UV-vis transitions and redox potentials for each of the complexes. The oxygen atom transfer (OAT) and hydrogen atom transfer (HAT) reactivity of the Mn(V)(O) complexes was also influenced by p-MeO substitution. The OAT reactivity of Mn(V)(O)(MeOP8Cz) (MeOP8Cz = octakis(p-methoxyphenyl)corrolazinato(3-)) with triarylphosphine (PAr3) substrates led to second-order rate constants from 10.2(5) to 3.1(2) × 10(4) M(-1) s(-1). These rates of OAT are slower than those seen for Mn(V)(O)(TBP8Cz) (TBP8Cz = octakis(p-tert-butylphenyl)corrolazinato(3-)). A Hammett study involving para-substituted PAr3 substrates reveals a Hammett ρ-value for Mn(V)(O)(MeOP8Cz) that is more negative than that observed for Mn(V)(O)(TBP8Cz), consistent with a less electrophilic Mn center. The HAT reactivity of Mn(V)(O)(MeOP8Cz) with C-H substrates was examined and revealed second-order rate constants from 6.8(5) × 10(-5) to 1.70(2) × 10(-1) M(-1) s(-1). The rate constants varied with the C-H bond strength of the substrate. Slightly faster HAT rates with C-H substrates were observed with Mn(V)(O)(MeOP8Cz) compared to Mn(V)(O)(TBP8Cz), indicating that the basicity of the putative [Mn(IV)(O)](-) intermediate likely compensates for the more negative redox potential in the driving force for HAT. In addition, the complete, large-scale synthesis of the para-phenyl-substituted porphyrazines RP8PzH2 (R = p-tert-butylphenyl (TB), p-methoxyphenyl (MeO), and p-isopropylphenyl) and corrolazines RP8CzH3 (TBP8CzH3 and MeOP8CzH3) is presented. The crystal structures of the monoprotonated, metal-free corrolazine [(TBP8CzH3)(H)](+)[BArF](-), P(V)(OMe)2(MeOP8Cz), and Mn(III)(MeOP8Cz)(MeOH) are presented. This work provides the first insights into the influence of electronic substituent effects on the corrolazine periphery.

Challenging Density Functional Theory Calculations with Hemes and Porphyrins

In this paper we review recent advances in computational chemistry and specifically focus on the chemical description of heme proteins and synthetic porphyrins that act as both mimics of natural processes and technological uses. These are challenging biochemical systems involved in electron transfer as well as biocatalysis processes. In recent years computational tools have improved considerably and now can reproduce experimental spectroscopic and reactivity studies within a reasonable error margin (several kcal·mol(-1)). This paper gives recent examples from our groups, where we investigated heme and synthetic metal-porphyrin systems. The four case studies highlight how computational modelling can correctly reproduce experimental product distributions, predicted reactivity trends and guide interpretation of electronic structures of complex systems. The case studies focus on the calculations of a variety of spectroscopic features of porphyrins and show how computational modelling gives important insight that explains the experimental spectra and can lead to the design of porphyrins with tuned properties.

Photocatalytic Oxygenation of Substrates by Dioxygen with Protonated Manganese(III) Corrolazine

UV-vis spectral titrations of a manganese(III) corrolazine complex [Mn(III)(TBP8Cz)] with HOTf in benzonitrile (PhCN) indicate mono- and diprotonation of Mn(III)(TBP8Cz) to give Mn(III)(OTf)(TBP8Cz(H)) and [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] with protonation constants of 9.0 × 10(6) and 4.7 × 10(3) M(-1), respectively. The protonated sites of Mn(III)(OTf)(TBP8Cz(H)) and [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] were identified by X-ray crystal structures of the mono- and diprotonated complexes. In the presence of HOTf, the monoprotonated manganese(III) corrolazine complex [Mn(III)(OTf)(TBP8Cz(H))] acts as an efficient photocatalytic catalyst for the oxidation of hexamethylbenzene and thioanisole by O2 to the corresponding alcohol and sulfoxide with 563 and 902 TON, respectively. Femtosecond laser flash photolysis measurements of Mn(III)(OTf)(TBP8Cz(H)) and [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] in the presence of O2 revealed the formation of a tripquintet excited state, which was rapidly converted to a tripseptet excited state. The tripseptet excited state of Mn(III)(OTf)(TBP8Cz(H)) reacted with O2 with a diffusion-limited rate constant to produce the putative Mn(IV)(O2(•-))(OTf)(TBP8Cz(H)), whereas the tripseptet excited state of [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] exhibited no reactivity toward O2. In the presence of HOTf, Mn(V)(O)(TBP8Cz) can oxidize not only HMB but also mesitylene to the corresponding alcohols, accompanied by regeneration of Mn(III)(OTf)(TBP8Cz(H)). This thermal reaction was examined for a kinetic isotope effect, and essentially no KIE (1.1) was observed for the oxidation of mesitylene-d12, suggesting a proton-coupled electron transfer (PCET) mechanism is operative in this case. Thus, the monoprotonated manganese(III) corrolazine complex, Mn(III)(OTf)(TBP8Cz(H)), acts as an efficient photocatalyst for the oxidation of HMB by O2 to the alcohol.