Important Roles of Enthalpic and Entropic Contributions to CO2 Capture from Simulated Flue Gas and Ambient Air Using Mesoporous Silica Grafted Amines

Sequential Pore Functionalization in MOFs for Enhanced Carbon Dioxide Capture

The capture of carbon dioxide (CO2) is crucial for reducing greenhouse emissions and achieving net-zero emission goals. Metal-organic frameworks (MOFs) present a promising solution for carbon capture due to their structural adaptability, tunability, porosity, and pore modification. In this research, we explored the use of a copper (Cu(II))-based MOF called m CBMOF-1. After activation, m CBMOF-1 generates one-dimensional channels with square cross sections, featuring sets of four Cu(II) open metal sites spaced by 6.042 Å, allowing strong interactions with coordinating molecules. To investigate this capability, m CBMOF-1 was exposed to ammonia (NH3) gas, resulting in hysteretic NH3 isotherms indicative of strong interactions between Cu(II) and NH3. At 150 mbar and 298 K, the NH3-loaded (∼1 mmol/g) material exhibited a 106% increase in CO2 uptake compared to that of the pristine m CBMOF-1. Carbon-13 solid-state nuclear magnetic resonance spectra and density functional theory calculations confirmed that the sequential loading of NH3 followed by CO2 adsorption generated a copper-carbamic acid complex within the pores of m CBMOF-1. Our study highlights the effectiveness of sequential pore functionalization in MOFs as an attractive strategy for enhancing the interactions of MOFs with small molecules such as CO2.

High-temperature carbon dioxide capture in a porous material with terminal zinc hydride sites

Carbon capture can mitigate point-source carbon dioxide (CO2) emissions, but hurdles remain that impede the widespread adoption of amine-based technologies. Capturing CO2 at temperatures closer to those of many industrial exhaust streams (>200°C) is of interest, although metal oxide absorbents that operate at these temperatures typically exhibit sluggish CO2 absorption kinetics and instability to cycling. Here, we report a porous metal-organic framework featuring terminal zinc hydride sites that reversibly bind CO2 at temperatures above 200°C-conditions that are unprecedented for intrinsically porous materials. Gas adsorption, structural, spectroscopic, and computational analyses elucidate the rapid, reversible nature of this transformation. Extended cycling and breakthrough analyses reveal that the material is capable of deep carbon capture at low CO2 concentrations and high temperatures relevant to postcombustion capture.

Distributed direct air capture of carbon dioxide by synergistic water harvesting

Adsorption-based direct air capture (DAC) of carbon dioxide, using chemisorbents like solid amines, has been widely recognized as a sustainable measure to contain atmospheric CO2 concentrations. However, the productivity and economic viability of DAC have been compromised by the high energy consumption for regenerating the adsorbents. Here, we show that by synergistically harvesting water and carbon dioxide from the atmosphere, we can regenerate the unit using in situ vapor purge at low energy and capital cost. The desorption of CO2 is substantially enhanced in the presence of concentrated water vapors at around 100 °C, concurrently producing 97.7% purity CO2 and fresh water without the use of vacuum pumps and steam boilers. Moreover, we demonstrate that the DAC prototype can also be powered by sunlight, which recovers 98% of the adsorbed CO2, with 20% less energy demand, enabling sustainable carbon capture from air in a real distributed manner.

Metal-organic frameworks based on pyrazolates for the selective and efficient capture of formaldehyde

Indoor air pollution is one of the major threads in developed countries, notably due to high concentrations of formaldehyde, a harmful molecule difficult to eliminate. Addressing this purification challenge while adhering to the principles of sustainable development requires the use of innovative, advanced sustainable materials. Here we show that by combining state-of-the-art spectroscopic techniques with density-functional theory molecular simulations, we have developed an advantageous mild chemisorption synergistic mechanism using porous metal (III or IV) pyrazole- di-carboxylate based metal-organic framework (MOF) to trap formaldehyde in a reversible manner, without incurring significant energy penalties for regeneration. A straightforward, environmentally friendly, and scalable synthesis protocol was established for the porous, water-stable aluminum pyrazole dicarboxylate known as Al-3.5-PDA or MOF-303, capable of functioning as a highly efficient and reusable filter. It demonstrates selectivity and high storage capacity for formaldehyde under conditions typical of severe indoor use, such as in housing or vehicle cockpits, including varying VOC mixtures and concentrations, humidity, and temperature, without any accidental release. Furthermore, we have successfully regenerated this sorbent using a simple domestic protocol, ensuring the material reusability for at least 10 cycles.

Cascade CO2 Insertion in Carbanion Ionic Liquids Driven by Structure Rearrangement

The CO2 chemisorption in state-of-the-art sorbents based on oxide/hydroxide/amine moieties is driven by strong chemical bonding formation in the carbonate/bicarbonate/carbamate products, which in turn leads to high energy input in sorbent regeneration. In addition, the CO2 uptake capacity was limited by the active sites' utilization efficiency, with each active site incorporating one CO2 molecule or less. In this work, a new concept and generation of sorbent was developed to achieve cascade insertion of multiple CO2 molecules by leveraging structure rearrangement as the driving force, leading to in situ generation of extra CO2-binding sites and significantly reduced energy input for CO2 release. The designed ionic liquids (ILs) containing carbanions with conjugated and asymmetric structure, deprotonated (methylsulfonyl)acetonitrile ([MSA]) anion, allowed the cascade insertion of two CO2 molecules via consecutive C-C and O-C bond formations. The proton transfer and structure rearrangement of the carboxylic acid intermediates played critical roles in stabilizing the first integrated CO2 and generating extra electron-rich oxygen sites for the insertion of the second CO2. The structure variation and reaction pathway were confirmed by operando spectroscopy, magnetic resonance spectroscopy (NMR), mass spectroscopy, and computational chemistry. The energy input in sorbent regeneration could be further reduced by harnessing the phase-changing behavior of the carbanion salts in ether solutions upon reacting with CO2, avoiding the energy consumption in heating the solvent. The fundamental insights obtained herein provide a promising approach to greatly improve the CO2 sorption performance via sophisticated molecular-scale structural engineering of the sorbents.

Using inelastic neutron scattering spectroscopy to probe CO2 binding in grafted aminosilanes

While a range of in situ characterisation techniques are available to probe CO2 adsorption processes, inelastic neutron scattering is scarcely used, primarily due to the reliance on hydrogeneous modes. Materials capable of adsorbing CO2, such as solid supported-amines contain a range of C-H and N-H species, which can be probed to explore the adsorption of CO2. Here we show the benefits of using inelastic neutron spectroscopy to probe CO2 adsorption with solid supported-amines, and the complementarity that can be achieved using different world-leading spectrometers.

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO2

The covalent organic frameworks (COFs) possessing high crystallinity and capability to capture low-concentration CO2 (400 ppm) from air are still underdeveloped. The challenge lies in simultaneously incorporating high-density active sites for CO2 insertion and maintaining the ordered structure. Herein, a structure engineering approach is developed to afford an ionic pair-functionalized crystalline and stable fluorinated COF (F-COF) skeleton. The ordered structure of the F-COF is well maintained after the integration of abundant basic fluorinated alcoholate anions, as revealed by synchrotron X-ray scattering experiments. The breakthrough test demonstrates its attractive performance in capturing (400 ppm) CO2 from gas mixtures via O─C bond formation, as indicated by the in situ spectroscopy and operando nuclear magnetic resonance spectroscopy using 13C-labeled CO2 sources. Both theoretical and experimental thermodynamic studies reveal the reaction enthalpy of ≈-40 kJ mol-1 between CO2 and the COF scaffolds. This implies weaker interaction strength compared with state-of-the-art amine-derived sorbents, thus allowing complete CO2 release with less energy input. The structure evolution study from synchrotron X-ray scattering and small-angle neutron scattering confirms the well-maintained crystalline patterns after CO2 insertion. The as-developed proof-of-concept approach provides guidance on anchoring binding sites for direct air capture (DAC) of CO2 in crystalline scaffolds.

Machine learning demonstrates the impact of proton transfer and solvent dynamics on CO2 capture in liquid ammonia

Direct air capture of CO2 using supported amines provides a promising means to achieve the net-zero greenhouse gas emissions goal; however, many mechanistic details regarding the CO2 adsorption process in condensed phase amines remain poorly understood. This work combines machine learning potentials, enhanced sampling and grand-canonical Monte Carlo simulations to directly compute experimentally relevant quantities to elucidate the mechanism of CO2 chemisorption in liquid ammonia as a model system. Our simulations suggest that CO2 capture in the liquid occurs in a sequential fashion, with the formation of a metastable zwitterion intermediate. Furthermore, we identified the importance of solvent-mediated proton transfer and solvent dynamics, not only in the reaction pathway but also in the efficiency of CO2 chemisorption. Beyond liquid ammonia, the methodology presented here can be readily extended to simulate amines with more complex chemical structures under experimental conditions, paving the way to elucidate the structure-performance of amines for CO2 capture.

Improving the direct air capture capacity of grafted amines via thermal treatment

This study investigates the effects of elevated temperature thermal treatments on the direct air capture of CO2 by aminosilane-grafted SBA-15 silica sorbents. Exposing samples to high temperatures (200-250 °C compared to 80-120 °C) in an inert environment resulted in improved CO2 capacity (5-21%) that was sustained over multiple adsorption/desorption cycles.

High-Performance CO2 Capture from Air by Harnessing the Power of CaO- and Superbase-Ionic-Liquid-Engineered Sorbents

Direct air capture (DAC) of CO2 by solid porous materials represents an attractive "negative emission" technology. However, state-of-the-art sorbents based on supported amines still suffer from unsolved high energy consumption and stability issues. Herein, taking clues from the CO2 interaction with superbase-derived ionic liquids (SILs), high-performance and tunable sorbents in DAC of CO2 was developed by harnessing the power of CaO- and SIL-engineered sorbents. Deploying mesoporous silica as the substrate, a thin CaO layer was first introduced to consume the surface-OH groups, and then active sites with different basicities (e. g., triazolate and imidazolate) were introduced as a uniformly distributed thin layer. The as-obtained sorbents displayed high CO2 uptake capacity via volumetric (at 0.4 mbar) and breakthrough test (400 ppm CO2 source), rapid interaction kinetics, facile CO2 releasing, and stable sorption/desorption cycles. Operando diffuse reflectance infrared Fourier transformation spectroscopy (DRIFTS) analysis under simulated air atmosphere and solid-state NMR under 13 CO2 atmosphere demonstrated the critical roles of the SIL species in low-concentration CO2 capture. The fundamental insights obtained in this work provide guidance on the development of high-performance sorbents in DAC of CO2 by leveraging the combined advantages of porous solid scaffolds and the unique features of CO2 -philic ionic liquids.

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2

Direct air capture (DAC) of CO2 has emerged as the most promising "negative carbon emission" technologies. Despite being state-of-the-art, sorbents deploying alkali hydroxides/amine solutions or amine-modified materials still suffer from unsolved high energy consumption and stability issues. In this work, composite sorbents are crafted by hybridizing a robust metal-organic framework (Ni-MOF) with superbase-derived ionic liquid (SIL), possessing well maintained crystallinity and chemical structures. The low-pressure (0.4 mbar) volumetric CO2 capture assessment and a fixed-bed breakthrough examination with 400 ppm CO2 gas flow reveal high-performance DAC of CO2 (CO2 uptake capacity of up to 0.58 mmol g-1 at 298 K) and exceptional cycling stability. Operando spectroscopy analysis reveals the rapid (400 ppm) CO2 capture kinetics and energy-efficient/fast CO2 releasing behaviors. The theoretical calculation and small-angle X-ray scattering demonstrate that the confinement effect of the MOF cavity enhances the interaction strength of reactive sites in SIL with CO2 , indicating great efficacy of the hybridization. The achievements in this study showcase the exceptional capabilities of SIL-derived sorbents in carbon capture from ambient air in terms of rapid carbon capture kinetics, facile CO2 releasing, and good cycling performance.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Direct Air Capture of CO2 Using a Liquid Amine-Solid Carbamic Acid Phase-Separation System Using Diamines Bearing an Aminocyclohexyl Group

The phase separation between a liquid amine and the solid carbamic acid exhibited >99% CO₂ removal efficiency under a 400 ppm CO₂ flow system using diamines bearing an aminocyclohexyl group. Among them, isophorone diamine [IPDA; 3-(aminomethyl)-3,5,5-trimethylcyclohexylamine] exhibited the highest CO₂ removal efficiency. IPDA reacted with CO₂ in a CO₂/IPDA molar ratio of ≥1 even in H₂O as a solvent. The captured CO₂ was completely desorbed at 333 K because the dissolved carbamate ion releases CO₂ at low temperatures. The reusability of IPDA under CO₂ adsorption-and-desorption cycles without degradation, the >99% efficiency kept for 100 h under direct air capture conditions, and the high CO₂ capture rate (201 mmol/h for 1 mol of amine) suggest that the phase separation system using IPDA is robust and durable for practical use.

New-Generation Carbon-Capture Ionic Liquids Regulated by Metal-Ion Coordination

Development of efficient carbon capture-and-release technologies with minimal energy input is a long-term challenge in mitigating CO₂ emissions, especially via CO₂ chemisorption driven by engineered chemical bond construction. Herein, taking advantage of the structural diversity of ionic liquids (ILs) in tuning their physical and chemical properties, precise reaction energy regulation of CO₂ chemisorption was demonstrated deploying metal-ion-amino-based ionic liquids (MAILs) as absorbents. The coordination ability of different metal sites (Cu, Zn, Co, Ni, and Mg) to amines was harnessed to achieve fine-tuning on stability constants of the metal ion-amine complexes, acting as the corresponding cations in the construction of diverse ILs coupled with CO₂ -philic anions. The as-afforded MAILs exhibited efficient and controllable CO₂ release behavior with great reduction in energy input and minimal sacrifice on CO₂ uptake capacity. This coordination-regulated approach offers new prospects for the development of ILs-based systems and beyond towards energy-efficient carbon capture technologies.

A cooperative adsorbent for the switch-like capture of carbon dioxide from crude natural gas

Natural gas constitutes a growing share of global primary energy due to its abundant supply and lower CO₂ emission intensity compared to coal. For many natural gas reserves, CO₂ contamination must be removed at the wellhead to meet pipeline specifications. Here, we demonstrate the potential of the diamine-appended metal–organic framework ee-2–Mg₂(dobpdc) (ee-2 = N,N-diethylethylenediamine; dobpdc⁴⁻ = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) as a next-generation CO₂ capture material for high-pressure natural gas purification. Owing to a cooperative adsorption mechanism involving formation of ammonium carbamate chains, ee-2–Mg₂(dobpdc) can be readily regenerated with a minimal change in temperature or pressure and maintains its CO₂ capacity in the presence of water. Moreover, breakthrough experiments reveal that water enhances the CO₂ capture performance of ee-2–Mg₂(dobpdc) by eliminating “slip” of CO₂ before full breakthrough. Spectroscopic characterization and multicomponent adsorption isobars suggest that the enhanced performance under humid conditions arises from preferential stabilization of the CO₂-inserted phase in the presence of water. The favorable performance of ee-2–Mg₂(dobpdc) is further demonstrated through comparison with a benchmark material for this separation, zeolite 13X, as well as extended pressure cycling. Overall, these results support continued development of ee-2–Mg₂(dobpdc) as a promising adsorbent for natural gas purification.

Diamine-appended metal–organic frameworks can be optimized as adsorbents for pressure-swing purification of crude natural gas. A cooperative CO₂ binding mechanism enables high CO₂ swing capacities and enhanced performance under humid conditions.

Preparation and characterization of templated porous carbons from sucrose by one-pot method and application as a CO2 adsorbent

The templated porous carbons were prepared from sucrose by one-pot method. In this method in which the pre-synthesis of the hard template is eliminated, the porous carbons were produced by organic-inorganic self-assembly of sucrose, tetraethyl ortosilicate (TEOS), Pluronic P123 and n-butanol in an acidic medium, and subsequent carbonization. The synthesis parameters such as sucrose amount, TEOS molar ratio and carbonization temperature were evaluated for describing their effects on the pore structures of the synthesized carbons. The prepared porous carbons were characterized by N₂ adsorption, thermogravimetric analysis (TGA), Raman spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) techniques. The carbon dioxide adsorption uptakes of the obtained porous carbons were determined at 1 bar and 273 K. The templated carbon obtained with the lowest TEOS molar ratio exhibited the highest BET surface area of 1289 m²/g and micropore volume of 0.467 cm³/g, and showed the highest CO₂ uptake of 2.28 mmol/g.

Deciphering Evolution Pathway of Supported NO3 • Enabled via Radical Transfer from •OH to Surface NO3 - Functionality for Oxidative Degradation of Aqueous Contaminants

NO₃ ^• can compete with omnipotent ^•OH/SO₄ ^•- in decomposing aqueous pollutants because of its lengthy lifespan and significant tolerance to background scavengers present in H₂O matrices, albeit with moderate oxidizing power. The generation of NO₃ ^•, however, is of grand demand due to the need of NO₂ ^•/O₃, radioactive element, or NaNO₃/HNO₃ in the presence of highly energized electron/light. This study has pioneered a singular pathway used to radicalize surface NO₃ ^- functionalities anchored on polymorphic α-/γ-MnO₂ surfaces (α-/γ-MnO₂-N), in which Lewis acidic Mn^2+/3+ and NO₃ ^- served to form ^•OH via H₂O₂ dissection and NO₃ ^• via radical transfer from ^•OH to NO₃ ^- (^•OH → NO₃ ^•), respectively. The elementary steps proposed for the ^•OH → NO₃ ^• route could be energetically favorable and marginal except for two stages such as endothermic ^•OH desorption and exothermic ^•OH-mediated NO₃ ^- radicalization, as verified by EPR spectroscopy experiments and DFT calculations. The Lewis acidic strength of the Mn^2+/3+ species innate to α-MnO₂-N was the smallest among those inherent to α-/β-/γ-MnO₂ and α-/γ-MnO₂-N. Hence, α-MnO₂-N prompted the rate-determining stage of the ^•OH → NO₃ ^• route (^•OH desorption) in the most efficient manner, as also evidenced by the analysis on the energy barrier required to proceed with the ^•OH → NO₃ ^• route. Meanwhile, XANES and in situ DRIFT spectroscopy experiments corroborated that α-MnO₂-N provided a larger concentration of surface NO₃ ^- species with bi-dentate binding arrays than γ-MnO₂-N. Hence, α-MnO₂-N could outperform γ-MnO₂-N in improving the collision frequency between ^•OH and NO₃ ^- species and in facilitating the exothermic transition of NO₃ ^- functionalities to surface NO₃ ^• analogues per unit time. These were corroborated by a greater efficiency of α-MnO₂-N in decomposing phenol, in addition to scavenging/filtration control runs and DFT calculations. Importantly, supported NO₃ ^• species provided 5-7-fold greater efficiency in degrading textile wastewater than conventional ^•OH and supported SO₄ ^•- analogues we discovered previously.

CO2 Chemisorption Behavior of Coordination-Derived Phenolate Sorbents

CO₂ chemisorption via C-O bond formation is an efficient methodology in carbon capture especially using phenolate-based ionic liquids (ILs) as the sorbents to afford carbonate products. However, most of the current IL systems involve alkylphosphonium cations, leading to side reactions via the ylide intermediate pathway. It is important to figure out the CO₂ chemisorption behavior of phenolate-derived sorbents using inactive and easily accessible cation counterparts without active protons. Herein, phenolate-based systems were constructed via coordination between alkali metal cations with crown ethers to avoid the participation of active protons in CO₂ chemisorption. Reaction pathway study revealed that CO₂ uptake could be achieved by O-C bond formation to afford carbonate. CO₂ uptake capacity and reaction enthalpy were significantly influenced by the coordination effect, alkali metal types, and alkyl groups on the benzene ring.

Graphene coupled TiO2 photocatalysts for environmental applications: A review

Nanostructured photocatalysts have always offered opportunities to solve issues concerned with the environmental challenges caused by rapid urbanization and industrialization. These materials, due to their tunable physicochemical characteristics, are capable of providing a clean and sustainable ecosystem to humanity. One of the current thriving research focuses of visible-light-driven photocatalysts is on the nanocomposites of titanium dioxide (TiO₂) with carbon nanostructures, especially graphene. Coupling TiO₂ with graphene has proven more active by photocatalysis than TiO₂ alone. It is generally considered that graphene sheets act as an electron acceptor facilitating the transfer and separation of photogenerated electrons during TiO₂ excitation, thereby reducing electron-hole recombination. This study briefly reviews the fundamental mechanism and interfacial charge-transfer dynamics in TiO₂/graphene nanocomposites. Design strategies of various graphene-based hybrids are highlighted along with some specialized synthetic routes adopted to attain preferred properties. Importantly, the enhancing interfacial charge transfer of photogenerated e¯_CB through the graphene layers by morphology orientation of TiO₂, predominated exposure of their high energy crystal facets, defect engineering, enhancing catalytic sites in graphene, constructing dedicated architectures, tuning the nanomaterial dimensionality at the interface, and employing the synergism adopted through various modifications, are systematically compiled. Portraying the significance of these photocatalytic hybrids in environmental remediation, important applications including air and water purification, self-cleaning surfaces, H₂ production, and CO₂ reduction to desired fuels, are addressed.

Assessing CO2 Adsorption on Amino-Functionalized Mesocellular Foams Synthesized at Different Aging Temperatures

A wide variety of solid sorbents has recently been synthesized for application in CO2 adsorption. Among them, mesoporous silicas deserve attention because of their ability to accommodate large concentrations of different chemicals as a consequence of their surface chemistry and tunable pore structure. Functionalized materials exhibit promising features for CO2 adsorption at high temperatures and low CO2 concentrations. This work aimed to assess the influence of the textural properties on the performance of CO2 adsorption on functionalized mesoporous silica. With this goal, several mesoporous silica foams were synthesized by varying the aging temperature, obtaining materials with larger pore diameter. Thus, the synthesized materials were functionalized by grafting or impregnation with 3-aminopropyltriethoxysilane, polyethylenimine, and tetraethylenepentamine as amine sources. Finally, the amino functionalized materials were assessed for CO2 capture by means of equilibrium adsorption isotherms at 25, 45, and 65°C. Among the most outstanding results, high aging temperatures favor the performance of impregnated materials by exposing greater pore diameters. Low or intermediate temperatures favor grafting by preserving an appropriate density of silanol groups.

Discovering Inherent Characteristics of Polyethylenimine-Functionalized Porous Materials for CO2 Capture

CO₂ capture is vital for addressing greenhouse gas (GHG)-based environmental issues worldwide. Amine-polymer/silica sorbents have been extensively studied for CO₂ capture, but the fundamental understandings of polyethylenimine (PEI) loading effect, thermal effect, and CO₂ sorption behavior are still lacking. Small-angle neutron scattering (SANS) offers promising opportunities for characterizing CO₂ sorption behavior of PEI-functionalized SBA-15. Herein, in situ SANS has been used to investigate not only PEI loading distribution but also PEI thermal swelling and temperature-dependent CO₂ sorption behavior of PEI-functionalized SBA-15. The results indicate that PEI could disperse on the mesopore surface for the sample with low PEI loading, while for the sample with high PEI loading, PEI could not only disperse on the mesopore surface but also partially fill in the mesopore as plugs. The sample with high PEI loading shows a two-stage swelling of PEI with increasing temperature from 25 to 120 °C in vacuum, in which the size of the intramolecular voids between PEI chains has no change from 25 to 75 °C but expands from 75 to 120 °C, whereas only a subtle swelling is observed up to 120 °C for the sample with low PEI loading. Besides the fact that in situ SANS successfully detects physisorbed CO₂ on the mesopore surface and chemisorbed CO₂ by the amine groups simultaneously: (1) the amount of physisorbed CO₂ increases with increasing pressure but decreases with increasing temperature, and (2) the amount of chemisorbed CO₂ has a trend of V_CO2 (75 °C) > V_CO2 (120 °C) > V_CO2 (25 °C). The thermal swelling of PEI causes dilation of intramolecular voids and thus increases the accessibility of chemisorption sites, resulting in higher CO₂ sorption capacity. Therefore, temperature and PEI swelling are essential factors for kinetic and thermodynamic controls of CO₂ capture in amine-functionalized porous adsorbents.

Water Enables Efficient CO2 Capture from Natural Gas Flue Emissions in an Oxidation-Resistant Diamine-Appended Metal-Organic Framework

Supported by increasingly available reserves, natural gas is achieving greater adoption as a cleaner-burning alternative to coal in the power sector. As a result, carbon capture and sequestration from natural gas-fired power plants is an attractive strategy to mitigate global anthropogenic CO₂ emissions. However, the separation of CO₂ from other components in the flue streams of gas-fired power plants is particularly challenging due to the low CO₂ partial pressure (∼40 mbar), which necessitates that candidate separation materials bind CO₂ strongly at low partial pressures (≤4 mbar) to capture ≥90% of the emitted CO₂. High partial pressures of O₂ (120 mbar) and water (80 mbar) in these flue streams have also presented significant barriers to the deployment of new technologies for CO₂ capture from gas-fired power plants. Here, we demonstrate that functionalization of the metal-organic framework Mg₂(dobpdc) (dobpdc^4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) with the cyclic diamine 2-(aminomethyl)piperidine (2-ampd) produces an adsorbent that is capable of ≥90% CO₂ capture from a humid natural gas flue emission stream, as confirmed by breakthrough measurements. This material captures CO₂ by a cooperative mechanism that enables access to a large CO₂ cycling capacity with a small temperature swing (2.4 mmol CO₂/g with ΔT = 100 °C). Significantly, multicomponent adsorption experiments, infrared spectroscopy, magic angle spinning solid-state NMR spectroscopy, and van der Waals-corrected density functional theory studies suggest that water enhances CO₂ capture in 2-ampd-Mg₂(dobpdc) through hydrogen-bonding interactions with the carbamate groups of the ammonium carbamate chains formed upon CO₂ adsorption, thereby increasing the thermodynamic driving force for CO₂ binding. In light of the exceptional thermal and oxidative stability of 2-ampd-Mg₂(dobpdc), its high CO₂ adsorption capacity, and its high CO₂ capture rate from a simulated natural gas flue emission stream, this material is one of the most promising adsorbents to date for this important separation.

Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle

This review focuses on important stability issues facing amine-functionalized CO2 adsorbents, including amine-grafted and amine-impregnated silicas, zeolites, metal-organic frameworks and carbons. During the past couple of decades, major advances were achieved in understanding and improving the performance of such materials, particularly in terms of CO2 adsorptive properties such as adsorption capacity, selectivity and kinetics. Nonetheless, to pave the way toward commercialization of adsorption-based CO2 capture technologies, in addition to other attributes, adsorbent materials should be stable over many thousands of adsorption-desorption cycles. Adsorbent stability, which is of utmost importance as it determines adsorbent lifetime and operational costs of CO2 capture, is a multifaceted issue involving thermal, hydrothermal, and chemical stability. Here we discuss the impact of the adsorbent physical and chemical properties, the feed gas composition and characteristics, and the adsorption-desorption operational parameters on the long-term stability of amine-functionalized CO2 adsorbents. We also review important insights associated with the underlying deactivation pathways of the adsorbents upon exposure to high temperature, oxygen, dry CO2, sulfur-containing compounds, nitrogen oxides, oxygen and steam. Finally, specific recommendations are provided to address outstanding stability issues.

Silica-Supported Sterically Hindered Amines for CO2 Capture

Most studies exploring the capture of CO₂ on solid-supported amines have focused on unhindered amines or alkylimine polymers. It has been observed in extensive solution studies that another class of amines, namely sterically hindered amines, can exhibit enhanced CO₂ capacity when compared to their unhindered counterparts. In contrast to solution studies, there has been limited research conducted on sterically hindered amines on solid supports. In this work, one hindered primary amine and two hindered secondary amines are grafted onto mesoporous silica at similar amine coverages, and their adsorption performances are investigated through fixed bed breakthrough experiments and thermogravimetric analysis. Furthermore, chemisorbed CO₂ species formed on the sorbents under dry and humid conditions are elucidated using in situ Fourier-transform infrared spectroscopy. Ammonium bicarbonate formation and enhancement of CO₂ adsorption capacity is observed for all supported hindered amines under humid conditions. Our experiments in this study also suggest that chemisorbed CO₂ species formed on supported hindered amines are weakly bound, which may lead to reduced energy costs associated with regeneration if such materials were deployed in a practical separation process. However, overall CO₂ uptake capacities of the solid supported hindered amines are modest compared to their solution counterparts. The oxidative and thermal stabilities of the supported hindered amine sorbents are also assessed to give insight into their operational lifetimes.

Oxidatively-Stable Linear Poly(propylenimine)-Containing Adsorbents for CO2 Capture from Ultradilute Streams

Aminopolymer-based solid sorbents have been widely investigated for the capture of CO₂ from dilute streams such as flue gas or ambient air. However, the oxidative stability of the widely studied aminopolymer, poly(ethylenimine) (PEI), is limited, causing it to lose its CO₂ capture capacity after exposure to oxygen at elevated temperatures. Here, we demonstrate the use of linear poly(propylenimine) (PPI), synthesized through a simple cationic ring-opening polymerization, as a more oxidatively stable alternative to PEI with high CO₂ capacity and amine efficiency. The performance of linear PPI/SBA-15 composites was investigated over a range of CO₂ capture conditions (CO₂ partial pressure, adsorption temperature) to examine the tradeoff between adsorption capacity and sorption-site accessibility, which was expected to be more limited in linear polymers relative to the prototypical hyperbranched PEI. Linear PPI/SBA-15 composites were more efficient at CO₂ capture and retained 65-83 % of their CO₂ capacity after exposure to a harsh oxidative treatment, compared to 20-40 % retention for linear PEI. Additionally, we demonstrated long-term stability of linear PPI sorbents over 50 adsorption/desorption cycles with no loss in performance. Combined with other strategies for improving the oxidative stability and adsorption kinetics, linear PPI may play a role as a component of stable solid adsorbents in commercial applications for CO₂ capture.

CO₂ Capture with Mesoporous Silicas Modified with Amines by Double Functionalization: Assessment of Adsorption/Desorption Cycles

CO₂ adsorption on mesoporous silica modified with amine by double functionalization was studied. Adsorption microcalorimetry was used in order to investigate the influence of increasing the nitrogen surface density on double functionalized materials with respect to the only grafted materials. The distribution of sites and the rate-controlling mechanism of adsorption were evaluated. A Tian Calvet microcalorimeter coupled to a manometric setup was used to evaluate the energy distribution of adsorption sites and to calculate the thermokinetic parameters from the differential enthalpy curves. CO₂ and N₂ adsorption equilibrium isotherms at 50 and 75 °C were measured with a magnetic suspension balance, allowing for the computation of working capacity and selectivity at two temperatures. With these data, an Adsorbent Performance Indicator (API) was calculated and contrasted with other studied materials under the same conditions. The high values of API and selectivity confirmed that double functionalized mesoporous silica is a promising adsorbent for the post combustion process. The adsorption microcalorimetric study suggests a change in active sites distribution as the amine density increases. Maximum thermokinetic parameter suggests that physisorption on pores is the rate-controlling binding mechanism for the double-functionalized material.

A catalytic role of surface silanol groups in CO2 capture on the amine-anchored silica support

A new mechanism of CO₂ capture on the amine-functionalized silica support is demonstrated using density functional theory calculations, in which the silica surface not only acts as a support to anchor amines, but also can actively participate in the CO₂ capture process through a facile proton transfer reaction with the amine groups.

Spontaneous Cooling Absorption of CO2 by a Polymeric Ionic Liquid for Direct Air Capture

A polymeric ionic liquid (PIL), with quaternary ammonium ions attached to the polymer matrix, displays CO₂ affinity controlled by moisture. This finding led to the development of moisture swing absorption (MSA) for direct air capture of CO₂. This work aims to elucidate the role of water in MSA. For some humidity range, CO₂ absorption is an endothermic process associated with concurrent dehydration of the sorbent. The thermodynamic behavior of water indicates a decreased hydrophilicity of the PIL as the mobile anion transforms from CO₃^2- to HCO₃^- during CO₂ absorption. The decrease in hydrophilicity drives water out of the PIL, carrying heat away. The mechanism is elucidated by molecular modeling based on density functional theory. The finding of spontaneous cooling during absorption and its mechanism in the PIL opens new possibilities for designing an air capture sorbent with a strong CO₂ affinity but low absorption heat.

Solvent-Free Self-Assembly to the Synthesis of Nitrogen-Doped Ordered Mesoporous Polymers for Highly Selective Capture and Conversion of CO2

A solvent-free induced self-assembly technology for the synthesis of nitrogen-doped ordered mesoporous polymers (N-OMPs) is developed, which is realized by mixing polymer precursors with block copolymer templates, curing at 140-180 °C, and calcination to remove the templates. This synthetic strategy represents a significant advancement in the preparation of functional porous polymers through a fast and scalable yet environmentally friendly route, since no solvents or catalysts are used. The synthesized N-OMPs and their derived catalysts are found to exhibit competitive CO₂ capacities (0.67-0.91 mmol g^-1 at 25 °C and 0.15 bar), extraordinary CO₂ /N₂ selectivities (98-205 at 25 °C), and excellent activities for catalyzing conversion of CO₂ into cyclic carbonate (conversion >95% at 100 °C and 1.2 MPa for 1.5 h). The solvent-free technology developed in this work can also be extended to the synthesis of N-OMP/SiO₂ nanocomposites, mesoporous SiO₂ , crystalline mesoporous TiO₂ , and TiPO, demonstrating its wide applicability in porous material synthesis.

Linking Silica Support Morphology to the Dynamics of Aminopolymers in Composites

A combined computational and experimental approach is used to elucidate the effect of silica support morphology on polymer dynamics and CO₂ adsorption capacities in aminopolymer/silica composites. Simulations are based on coarse-grained molecular dynamics simulations of aminopolymer composites where a branched aminopolymer, representing poly(ethylenimine) (PEI), is impregnated into different silica mesoporous supports. The morphology of the mesoporous supports varies from hexagonally packed cylindrical pores representing SBA-15, double gyroids representing KIT-6 and MCM-48, and cagelike structures representing SBA-16. In parallel, composites of PEI and the silica supports SBA-15, KIT-6, MCM-48, and SBA-16 are synthesized and characterized, including measuring their CO₂ uptake. Simulations predict that a 3D pore morphology, such as those of KIT-6, MCM-48, and SBA-16, will have faster segmental mobility and have lower probability of primary amine and surface silanol associations, which should translate to higher CO₂ uptake in comparison to a 2D pore morphology such as that of SBA-15. Indeed, it is found that KIT-6 has higher CO₂ uptake than SBA-15 at equivalent PEI loading, even though both supports have similar surface area and pore volume. However, this is not the case for the MCM-48 support, which has smaller pores, and SBA-16, whose pore structure rapidly degrades after PEI impregnation.

Role of Alumina Basicity in CO2 Uptake in 3-Aminopropylsilyl-Grafted Alumina Adsorbents

Oxide-supported amine materials are widely known to be effective CO₂ sorbents under simulated flue-gas and direct-air-capture conditions. Most work has focused on amine species loaded onto porous silica supports, though potential stability advantages may be offered through the use of porous alumina supports. Unlike silica materials, which are comparably inert, porous alumina materials can be tuned to have substantial acidity and/or basicity. Owing to their amphoteric nature, alumina supports play a more active role in CO₂ sorption than silica supports, potentially directly participating in the adsorption process. In this work, primary amines associated with 3-aminopropyltriethoxysilane are grafted onto two different mesoporous alumina materials having different levels of basicity. Adsorbent materials with different amine loadings are prepared, and the CO₂ -adsorption behavior of similar amines on the two alumina supports is demonstrated to be different. At low amine loadings, the inherent properties of the support surface play a significant role, whereas at high amine loadings, when the alumina surface is effectively blocked, the sorbents prepared on the two supports behave similarly. At high amine loadings, amine-CO₂ -amine interactions are shown to dominate, leading to adsorbed species that appear similar to the species formed over silica-supported amine materials. The sorbent properties are comprehensively characterized using N₂ physisorption analysis, in situ FTIR spectroscopy, and adsorption microcalorimetry.

Flue-gas and direct-air capture of CO2 by porous metal-organic materials

Sequestration of CO₂, either from gas mixtures or directly from air (direct air capture), is a technological goal important to large-scale industrial processes such as gas purification and the mitigation of carbon emissions. Previously, we investigated five porous materials, three porous metal-organic materials (MOMs), a benchmark inorganic material, ZEOLITE 13X: and a chemisorbent, TEPA-SBA-15: , for their ability to adsorb CO₂ directly from air and from simulated flue-gas. In this contribution, a further 10 physisorbent materials that exhibit strong interactions with CO₂ have been evaluated by temperature-programmed desorption for their potential utility in carbon capture applications: four hybrid ultramicroporous materials, SIFSIX-3-CU: , DICRO-3-NI-I: , SIFSIX-2-CU-I: and MOOFOUR-1-NI: ; five microporous MOMs, DMOF-1: , ZIF-8: , MIL-101: , UIO-66: and UIO-66-NH2: ; an ultramicroporous MOM, NI-4-PYC: The performance of these MOMs was found to be negatively impacted by moisture. Overall, we demonstrate that the incorporation of strong electrostatics from inorganic moieties combined with ultramicropores offers improved CO₂ capture performance from even moist gas mixtures but not enough to compete with chemisorbents.This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.