Rational design of pH-controlled DNA strand displacement

Photocurrent switchable dual-target bioassay: Signal distinction and interface reconfiguration via pH-responsive triplex DNA programming

Most multiplexed photoelectrochemical (PEC) sensors require additional instrumentation and cumbersome electrode modification and surface partitioning, which limits their portability and instrument miniaturization. Herein, a pH-responsive programmable triple DNA nanomachine was developed for constructing a reconfigurable multiplex PEC sensing platform. By programming the base sequence, T-A·T-riched triple DNA was designed to construct integrated nano-controlled release machine (INCRM) for simultaneous recognition of multiple targets. The INCRM enables to recognize two targets in one step, and sequentially separate the signal labels by pH adjustment. The detached signal label catalyzes glucose to produce gluconic acid, causing the C-riched DNA fold into a triple structure on the electrode surface. As a result, one target can be detected relying on the enhanced photocurrent due to accelerated electron transfer between the CdS QD labeled at the end of C-riched DNA and the electrode. The triplex DNA dissociation in pH 7.4 buffer reconfigures the electrode interface, which can be continued to detect another target. The feasibility of the multiplexed sensor is verified by the detection of extensively coexisting antibiotics enrofloxacin (ENR) and ciprofloxacin (CIP). Under the optimal conditions, wide linear range (10 fg/mL ∼ 1 μg/mL) and low detection limit (3.27 fg/mL and 9.60 fg/mL) were obtained. The pH-regulated programmable triplex DNA nanomachine-based sensing platform overcomes the technical difficulties of conventional multiplexed PEC assay, which may open the way for miniaturization of multiplexed PEC sensors.

A novel tetrahedral framework nucleic acid-derived chemodynamic therapy agent for effective glioblastoma treatment

Chemodynamic therapy (CDT) has garnered significant attention for treating diverse malignant tumours due to its minimally invasive nature, reduced damage to healthy tissues, and potential mitigation of side effects. However, its application in glioblastoma (GBM) is hindered by the diminished capacity of CDT agents to traverse the blood-brain barrier (BBB), inadequate tumour targeting efficiency, and restricted availability of H2O2 within the tumour microenvironment (TME). To address these challenges, we devised a novel CDT agent (Fe@tFNAs-ANG-3AT) based on a tetrahedral framework nucleic acids (tFNAs). Fe@tFNAs-ANG-3AT was constructed by anchoring iron ions (Fe3+) onto the dual appendages-modified tFNAs. Specifically, one appendage, Angiopep-2 (ANG, a penetrating peptide), facilitates Fe@tFNAs-ANG-3AT penetration across the BBB and selective targeting of tumour cells. Simultaneously, the second appendage, 3-Amino-1,2,4-triazole (3AT, a H2O2 enzyme inhibitor), augments the H2O2 levels required for effective CDT treatment. Upon tumour cell internalization, the loaded Fe3+ in Fe@tFNAs-ANG-3AT is reduced to Fe2+ by the overexpressed glutathione (GSH) in the TME, catalysing the generation of cytotoxic hydroxyl radicals (·OH) and inducing tumour cell death via elevated oxidative stress levels within tumour cells. It is anticipated that Fe@tFNAs-ANG-3AT holds promise as a transformative treatment strategy for GBM.

Determination of the interior pH of lipid nanoparticles using a pH-sensitive fluorescent dye-based DNA probe

Lipid nanoparticles (LNPs) containing ionizable cationic lipids are proven delivery systems for therapeutic nucleic acids, such as small interfering RNA (siRNA). It is important to understand the relationship between the interior pH of LNPs and the pH of the external environment to understand LNP formulation and function. Here, we developed a simple and rapid approach for determining the pH of the LNP core using a pH-sensitive fluorescent dye-based DNA probe. LNP siRNA systems containing pH-responsive DNA probes (LNP-siRNA&DNA) were generated by rapid mixing of lipids in ethanol and pH 4 aqueous buffer containing siRNA and DNA probes. We demonstrated that DNA probes were readily encapsulated in LNP systems and were sequestered into an environment at a high concentration as evidenced by an inter-probe FRET signal. It was shown that the pH of LNP encapsulated probes closely follows the pH increase or decrease of the external environment. This indicates that the clinically approved LNP RNA systems with similar lipid compositions (e.g., Onpattro and Comirnaty) are highly permeable to protons and that the pH of the interior environment closely mirrors the external environment. The pH-dependent response of the probe in LNPs was also confirmed under buffer conditions at various pHs. Furthermore, we showed that the pH-sensitive DNA probe can be incorporated into LNP systems at levels that allow the pH response to be monitored at a single LNP level using convex lens-induced confinement (CLiC) confocal microscopy. Direct visualization of the internal pH of single particles with the fluorescent DNA probe was achieved by CLiC for LNP-siRNA&DNA systems formulated under both high and normal ionic strength conditions.

PAM-Engineered Toehold Switches as Input-Responsive Activators of CRISPR-Cas12a for Sensing Applications

The RNA-programmed CRISPR effector protein Cas12a has emerged as a powerful tool for gene editing and molecular diagnostics. However, additional bio-engineering strategies are required to achieve control over Cas12a activity. Here, we show that Toehold Switch DNA hairpins, presenting a rationally designed locked protospacer adjacent motif (PAM) in the loop, can be used to control Cas12a in response to molecular inputs. Reconfiguring the Toehold Switch DNA from a hairpin to a duplex conformation through a strand displacement reaction provides an effective means to modulate the accessibility of the PAM, thereby controlling the binding and cleavage activities of Cas12a. Through this approach, we showcase the potential to trigger downstream Cas12a activity by leveraging proximity-based strand displacement reactions in response to target binding. By utilizing the trans-cleavage activity of Cas12a as a signal transduction method, we demonstrate the versatility of our approach for sensing applications. Our system enables rapid, one-pot detection of IgG antibodies and small molecules with high sensitivity and specificity even within complex matrices. Besides the bioanalytical applications, the switchable PAM-engineered Toehold Switches serve as programmable tools capable of regulating Cas12a-based targeting and DNA processing in response to molecular inputs and hold promise for a wide array of biotechnological applications.

DNAzyme-Based Dissipative DNA Strand Displacement for Constructing Temporal Logic Gates

Toehold-mediated DNA strand displacement is the foundation of dynamic DNA nanotechnology, encompassing a wide range of tools with diverse functions, dynamics, and thermodynamic properties. However, a majority of these tools are limited to unidirectional reactions driven by thermodynamics. In response to the growing field of dissipative DNA nanotechnology, we present an approach: DNAzyme-based dissipative DNA strand displacement (D-DSD), which combines the principles of dynamic DNA nanotechnology and dissipative DNA nanotechnology. D-DSD introduces circular and dissipative characteristics, distinguishing it from the unidirectional reactions observed in conventional strand displacement. We investigated the reaction mechanism of D-DSD and devised temporal control elements. By substituting temporal components, we designed two distinct temporal AND gates using fewer than 10 strands, eliminating the need for complex network designs. In contrast to previous temporal logic gates, our temporal storage is not through dynamics control or cross-inhibition but through autoregressive storage, a more modular and scalable approach to memory storage. D-DSD preserves the fundamental structure of toehold-mediated strand displacement, while offering enhanced simplicity and versatility.

Dual-Aptamer Drift Canceling Techniques to Improve Long-Term Stability of Real-Time Structure-Switching Aptasensors

This paper presents a dual-aptamer scheme to mitigate signal drifts caused by structure-switching aptamers during long-term monitoring. Electrochemical aptamer-based (E-AB) biosensors have recently shown great potential for continuous in vivo monitoring. However, the accuracy of detection is often limited by signaling drifts. Traditional approaches rely on kinetic differential measurements (KDM) coupled with square-wave voltammetry to eliminate these drifts. Yet, we have discovered that KDM does not apply universally to all aptamers, as their responses at different SWV frequencies heavily rely on their structure-switching characteristics and the electron transfer (ET) kinetics of the redox reporters. In light of this, we propose a "dual-aptamer" scheme that utilizes two aptamers, each responding differently to the same target molecule to cancel out drift. These paired aptamers are identified through (1) screening from an existing pool of aptamers and (2) engineering the signaling behavior of the redox reporters. We demonstrate the differential signaling of the aptamer pair in the presence of ampicillin and ATP molecules and show that the pair exhibits similar drifts in undiluted goat serum. By implementing drift cancelation, sensor drift is reduced by a factor of 370. Additionally, the differential signaling enables an increased recording throughput by leveraging differential readout electronics. The authors believe that the proposed technique holds significant benefits for long-term in vivo monitoring.

Metal-mediated DNA strand displacement and molecular device operations based on base-pair switching of 5-hydroxyuracil nucleobases

Rational design of self-assembled DNA nanostructures has become one of the fastest-growing research areas in molecular science. Particular attention is focused on the development of dynamic DNA nanodevices whose configuration and function are regulated by specific chemical inputs. Herein, we demonstrate the concept of metal-mediated base-pair switching to induce inter- and intramolecular DNA strand displacement in a metal-responsive manner. The 5-hydroxyuracil (UOH) nucleobase is employed as a metal-responsive unit, forming both a hydrogen-bonded UOH-A base pair and a metal-mediated UOH-GdIII-UOH base pair. Metal-mediated strand displacement reactions are demonstrated under isothermal conditions based on the base-pair switching between UOH-A and UOH-GdIII-UOH. Furthermore, metal-responsive DNA tweezers and allosteric DNAzymes are developed as typical models for DNA nanodevices simply by incorporating UOH bases into the sequence. The metal-mediated base-pair switching will become a versatile strategy for constructing stimuli-responsive DNA nanostructures, expanding the scope of dynamic DNA nanotechnology.

Environmentally Controlled Oscillator with Triplex Guided Displacement of DNA Duplexes

The use of DNA triplex association is advantageous for the reconfiguration of dynamic DNA nanostructures through pH alteration and can provide environmental control for both structural changes and molecular signaling. The combination of pH-induced triplex-forming oligonucleotide (TFOs) binding with toehold-mediated strand displacement has recently garnered significant attention in the field of structural DNA nanotechnology. While most previous studies use single-stranded DNA to displace or replace TFOs within the triplex, here we demonstrate that pH alteration allows a DNA duplex, with a toehold assistance, to displace TFOs from the components of another DNA duplex. We examined the dependence of this process on toehold length and show that the pH changes allow for cyclic oscillations between two molecular formations. We implemented the duplex/triplex design onto the surface of 2D DNA origami in the form outlining binary digits 0 or 1 and verified the oscillatory conformational changes between the two formations with atomic force microscopy.

Understanding the self-assembly dynamics of A/T absent 'four-way DNA junctions with sticky ends' at altered physiological conditions through molecular dynamics simulations

Elucidation of structure and dynamics of alternative higher-order structures of DNA such as in branched form could be targeted for therapeutics designing. Herein, we are reporting the intrinsically dynamic and folds transitions of an unusual DNA junction with sequence d(CGGCGGCCGC)4 which self-assembles into a four-way DNA junction form with sticky ends using long interval molecular simulations under various artificial physiological conditions. The original crystal structure coordinates (PDB ID: 3Q5C) for the selected DNA junction was considered for a total of 1.1 μs molecular dynamics simulation interval, including different temperature and pH, under OPLS-2005 force field using DESMOND suite. Following, post-dynamics structure parameters for the DNA junction were calculated and analyzed by comparison to the crystal structure. We show here that the self-assembly dynamics of DNA junction is mitigated by the temperature and pH sensitivities, and discloses peculiar structural properties as function of time. From this study it can be concluded on account of temperature sensitive and pH dependent behaviours, DNA junction periodic arrangements can willingly be synthesized and redeveloped for multiple uses like genetic biomarkers, DNA biosensor, DNA nanotechnology, DNA Zipper, etc. Furthermore, the pH dis-regulation behaviour may be used to trigger the functionality of DNA made drug-releasing nanomachines.

Programming Non-Nucleic Acid Molecules into Computational Nucleic Acid Systems

Nucleic acid (NA) computation has been widely developed in the past years to solve kinds of logic and mathematic issues in both information technologies and biomedical analysis. However, the difficulty to integrate non-NA molecules limits its power as a universal platform for molecular computation. Here, we report a versatile prototype of hybridized computation integrated with both nucleic acids and non-NA molecules. Employing the conformationally controlled ligand converters, we demonstrate that non-NA molecules, including both small molecules and proteins, can be computed as nucleic acid strands to construct the circuitry with increased complexity and scalability, and can be even programmed to solve arithmetical calculations within the computational nucleic acid system. This study opens a new door for molecular computation in which all-NA circuits can be expanded with integration of various ligands, and meanwhile, ligands can be precisely programmed by the nuclei acid computation.

A pH-Responsive Covalent Nanoscale Device Enhancing Temporal and Force Stability for Specific Tumor Imaging

Approaches to DNA probe-mediated precision medicine have been extensively explored for the diagnosis and treatment of diverse types of cancer. Despite this, simple nanoscale devices with the required recognition specificity and sensitivity for clinical application have remained elusive until now. Here, we report a pH-driven covalent nanoscale device that integrates pH-responsive, switchable structure and proximity-driven covalent cross-linking. A tumor acidic, pH-driven mechanism eliminates "on-target, off-tumor" nonspecific recognition. By manipulating covalent binding to target molecule on the cell surface, this nanodevice avoids binding-then-shedding to improve the sensitivity of tumor recognition. We envision that this pH-driven covalent nanoscale device will inspire more clinical applications toward specific, long-term tumor imaging in the cancer microenvironment.

Toehold clipping: A mechanism for remote control of DNA strand displacement

The ability to create stimuli-responsive DNA nanostructures has played a prominent role in dynamic DNA nanotechnology. Primary among these is the process of toehold-based strand displacement, where a nucleic acid molecule can act as a trigger to cause conformational changes in custom-designed DNA nanostructures. Here, we add another layer of control to strand displacement reactions through a 'toehold clipping' process. By designing DNA complexes with a photocleavable linker-containing toehold or an RNA toehold, we show that we can use light (UV) or enzyme (ribonuclease) to eliminate the toehold, thus preventing strand displacement reactions. We use molecular dynamics simulations to analyze the structural effects of incorporating a photocleavable linker in DNA complexes. Beyond simple DNA duplexes, we also demonstrate the toehold clipping process in a model DNA nanostructure, by designing a toehold containing double-bundle DNA tetrahedron that disassembles when an invading strand is added, but stays intact after the toehold clipping process even in the presence of the invading strand. This work is an example of combining multiple physical or molecular stimuli to provide additional remote control over DNA nanostructure reconfiguration, advances that hold potential use in biosensing, drug delivery or molecular computation.

DNA-mediated dynamic plasmonic nanostructures: assembly, actuation, optical properties, and biological applications

Recent advances in DNA technology have made it possible to combine with the plasmonics to fabricate reconfigurable dynamic nanodevices with extraordinary property and function. These DNA-mediated plasmonic nanostructures have been investigated for a variety of unique and beneficial physicochemical properties and their dynamic behavior has been controlled by endogenous or exogenous stimuli for a variety of interesting biological applications. In this perspective, the recent efforts to use the DNA nanostructures as molecular linkers for fabricating dynamic plasmonic nanostructures are reviewed. Next, the actuation media for triggering the dynamic behavior of plasmonic nanostructures and the dynamic response in optical features are summarized. Finally, the applications, remaining challenges and perspectives of the DNA-mediated dynamic plasmonic nanostructures are discussed.

A Photoresponsive Intramolecular Triplex Motif That Enables Rapid and Reversible Control of Aptamer Binding Activity

DNA switches that can change conformation in response to certain wavelengths of light could enable rapid and noninvasive control of chemical processes for a wide range of applications. However, most current photoresponsive DNA switches are limited by either irreversible switching or reversible switching with impractically slow kinetics. Here, we report the design of an intramolecular triplex photoswitch (TPS) design based on single-stranded DNA that undergoes rapid and reversible photoswitching between folded and unfolded states through isomerization of internal azobenzene modifications. After optimizing the performance of our photoswitch design, we used molecular dynamics simulations to reveal how individual azobenzenes contribute to the stabilization or destabilization of the triplex depending on their photoisomerization state. By coupling our TPS to an existing aptamer, we can reversibly modulate its binding affinity with less than 15 s of UV light exposure. We further demonstrate reproducible shifting in affinity over multiple cycles of UV and blue light irradiation without substantial photobleaching.

Using ultraviolet absorption spectroscopy to study nanoswitches based on non-canonical DNA structures

Non-canonical forms of DNA are attracting increasing interest for applications in nanotechnology. It is frequently convenient to characterize DNA molecules using a label-free approach such as ultraviolet absorption spectroscopy. In this paper we present the results of our investigation into the use of this technique to probe the folding of quadruplex and triplex nanoswitches. We confirmed that four G-quartets were necessary for folding at sub-mM concentrations of potassium and found that the wrong choice of sequence for the linker between G-tracts could dramatically disrupt folding, presumably due to the presence of kinetic traps in the folding landscape. In the case of the triplex nanoswitch we examined, we found that the UV spectrum showed a small change in absorbance when a triplex was formed. We anticipate that our results will be of interest to researchers seeking to design DNA nanoswitches based on quadruplexes and triplexes.

•

Ultraviolet absorption spectroscopy can probe non-canonical DNA structures.

•

Absorbance at 295 nm tends to increase as G-quadruplexes form.

•

Four G-quartets are needed to form a quadruplex with less than 1 mM potassium.

•

Formation of DNA triplexes can also yield a small change in UV spectra.

•

UV absorption is a cheap label-free method for studying DNA nanoswitches.

Anomeric DNA Strand Displacement with α-D Oligonucleotides as Invaders and Ethidium Bromide as Fluorescence Sensor for Duplexes with α/β-, β/β- and α/α-D Configuration

DNA strand displacement is a technique to exchange one strand of a double stranded DNA by another strand (invader). It is an isothermal, enzyme free method driven by single stranded overhangs (toeholds) and is employed in DNA amplification, mismatch detection and nanotechnology. We discovered that anomeric (α/β) DNA can be used for heterochiral strand displacement. Homochiral DNA in β-D configuration was transformed to heterochiral DNA in α-D/β-D configuration and further to homochiral DNA with both strands in α-D configuration. Single stranded α-D DNA acts as invader. Herein, new anomeric displacement systems with and without toeholds were designed. Due to their resistance against enzymatic degradation, the systems are applicable to living cells. The light-up intercalator ethidium bromide is used as fluorescence sensor to follow the progress of displacement. Anomeric DNA displacement shows benefits over canonical DNA in view of toehold free displacement and simple detection by ethidium bromide.

Intelligent Programmable DNA Nanomachines for the Spatially Controllable Imaging of Intracellular MicroRNA

The high programmability of DNA molecules makes them particularly suitable for constructing artificial molecular machines to perform sophisticated functions by simulating complex living systems. However, intelligent DNA nanomachines which can perform precise tasks logically in complex environments still remain challenging. Herein, we develop a general strategy to design a pH-responsive programmable DNA (PRPD) nanomachine to perform multilayer DNA cascades, enabling precise sensing and calculation of intracellular biomolecules. The PRPD nanomachine is built on a four-stranded DNAzyme walker precursor with a DNA switch on the surface of an Au nanoparticle, which is capable of precisely responding to pH variations in living cells by sequence tuning. This multilayer DNA cascade networks have been applicated in spatially controlled imaging of intracellular microRNA, which efficiently avoided the DNA nanomachine activated by nonspecific extracellular molecules and achieved apparent signal amplification. Our strategy enables the sensing-computing-output functional integration of DNA nanomachines, facilitating the application of programmable and complex nanomachines in nanoengineering, chemistry, and biomedicine.

Mismatch-fueled catalytic hairpin assembly mediated ultrasensitive biosensor for rapid detection of MicroRNA

Herein, a mismatch-fueled catalytic hairpin assembly (MCHA) was rationally engineered, which possessed higher amplification efficiency and faster rate than catalytic hairpin assembly (CHA). Once input target microRNA-21(miRNA-21) triggers the MCHA, the hairpin DNA H1 will be opened to form the duplex H1-miRNA-21, then the mismatched hairpin DNA H2 could easily hybridize with H1-miRNA-21 to generate duplex H1-H2 and the miRNA-21 could be released to enter next cycle, thus generating amounts of output products. Impressively, the MCHA realizes a pretty shorter complete reaction time of 40 min and quite higher amplification efficiency of 9.56 × 10⁶, which dramatically transcended the barrier: low amplification times and long reaction time in traditional CHA. As a proof of the concept, the elaborated MCHA as a hyper-efficiency and high-speed DNA signal-magnifier was successfully applied in ultrasensitive and rapid detection of miRNA-21 with the detection limit of 0.17 fM, which exploited an ingenious nucleic acid signal amplification technique for sensitive and fast detection of biomarkers in biosensing assay and clinic diagnose.

Cooperative Branch Migration: A Mechanism for Flexible Control of DNA Strand Displacement

DNA strand displacement plays an essential role in the field of dynamic DNA nanotechnology. However, flexible regulation of strand displacement remains a significant challenge. Most previous regulatory tools focused on controllable activation of toehold and thus limited the design flexibility. Here, we introduce a regulatory tool termed cooperative branch migration (CBM), through which DNA strand displacement can be controlled by regulating the complementarity of branch migration domains. CBM shows perfect compatibility with the majority of existing regulatory tools, and when combined with forked toehold, it permits continuous fine-tuning of the strand displacement rate spanning 5 orders of magnitude. CBM manifests multifunctional regulation ability, including rate fine-tuning, continuous dynamic regulation, reaction resetting, and selective activation. To exemplify the powerful function, we also constructed a nested if-function signal processing system on the basis of cascading CBM reactions. We believe that the proposed regulatory strategy would effectively enrich the DNA strand displacement toolbox and ultimately promote the construction of DNA machines of higher complexity in nucleic acid research and biomedical applications.

Programmable allosteric DNA regulations for molecular networks and nanomachines

Structure-based molecular regulations have been widely adopted to modulate protein networks in cells and recently developed to control allosteric DNA operations in vitro. However, current examples of programmable allosteric signal transmission through integrated DNA networks are stringently constrained by specific design requirements. Developing a new, more general, and programmable scheme for establishing allosteric DNA networks remains challenging. Here, we developed a general strategy for programmable allosteric DNA regulations that can be finely tuned by varying the dimensions, positions, and number of conformational signals. By programming the allosteric signals, we realized fan-out/fan-in DNA gates and multiple-layer DNA cascading networks, as well as expanding the approach to long-range allosteric signal transmission through tunable DNA origami nanomachines ~100 nm in size. This strategy will enable programmable and complex allosteric DNA networks and nanodevices for nanoengineering, chemical, and biomedical applications displaying sense-compute-actuate molecular functionalities.

Electrical conductivity measurement ofλDNA molecules by conductive atomic force microscopy

Conductive atomic force microscopy (C-AFM) is a powerful tool used in the microelectronics analysis by applying a certain bias voltage between the conducting probe and the sample and obtaining the electrical information of sample. In this work, the surface morphological information and current images of the lambda DNA (λDNA) molecules with different distributions were obtained by C-AFM. The 1 and 10 ngμl^-1DNA solutions were dripped onto mica sheets for making randomly distributed DNA and DNA network samples, and another 1 ngμl^-1DNA sample was placed in a DC electric field with a voltage of 2 V before being dried for stretching the DNA sample. The results show that the current flowing through DNA networks was significantly higher than the stretched and random distribution of DNA in the experiment. TheI-Vcurve of DNA networks was obtained by changing the bias voltage of C-AFM from -9 to 9 V. The currents flowing through stretched DNA at different pH values were studied. When the pH was 7, the current was the smallest, and the current was gradually increased as the solution became acidic or alkaline.

Obtaining Precise Molecular Information via DNA Nanotechnology

Precise characterization of biomolecular information such as molecular structures or intermolecular interactions provides essential mechanistic insights into the understanding of biochemical processes. As the resolution of imaging-based measurement techniques improves, so does the quantity of molecular information obtained using these methodologies. DNA (deoxyribonucleic acid) molecule have been used to build a variety of structures and dynamic devices on the nanoscale over the past 20 years, which has provided an accessible platform to manipulate molecules and resolve molecular information with unprecedented precision. In this review, we summarize recent progress related to obtaining precise molecular information using DNA nanotechnology. After a brief introduction to the development and features of structural and dynamic DNA nanotechnology, we outline some of the promising applications of DNA nanotechnology in structural biochemistry and in molecular biophysics. In particular, we highlight the use of DNA nanotechnology in determination of protein structures, protein-protein interactions, and molecular force.

Controllable DNA strand displacement by independent metal-ligand complexation

Introduction of artificial metal-ligand base pairs can enrich the structural diversity and functional controllability of nucleic acids. In this work, we revealed a novel approach by placing a ligand-type nucleoside as an independent toehold to control DNA strand-displacement reactions based on metal-ligand complexation. This metal-mediated artificial base pair could initiate strand invasion similar to the natural toehold DNA, but exhibited flexible controllability to manipulate the dynamics of strand displacement that was only governed by its intrinsic coordination properties. External factors that influence the intrinsic properties of metal-ligand complexation, including metal species, metal concentrations and pH conditions, could be utilized to regulate the strand dynamics. Reversible control of DNA strand-displacement reactions was also achieved through combination of the metal-mediated artificial base pair with the conventional toehold-mediated strand exchange by cyclical treatments of the metal ion and the chelating reagent. Unlike previous studies of embedded metal-mediated base pairs within natural base pairs, this metal-ligand complexation is not integrated into the nucleic acid structure, but functions as an independent toehold to regulate strand displacement, which would open a new door for the development of versatile dynamic DNA nanotechnologies.

Multi-Mode Reconfigurable DNA-Based Chemical Reaction Circuits for Soft Matter Computing and Control

Developing smart material systems for performing different tasks in diverse environments remains challenging. Here, we show that by integrating stimuli-responsive soft materials with multi-mode reconfigurable DNA-based chemical reaction circuits (D-CRCs), it can control size change of microgels with multiple reaction pathways and adapt expansion behaviors to meet diverse environments. We first use pH-responsive intramolecular conformational switches for regulating DNA strand displacement reactions (SDRs). The ability to regulate SDRs with tunable pH-dependence allows to build dynamic chemical reaction networks with diverse reaction pathways. We confirm that the designed DNA switching circuits are reconfigurable at different pH and perform different logic operations, and the swelling of DNA switching circuit-integrated microgel systems can be programmably directed by D-CRCs. Our approach provides insight into building smart responsive materials and fabricating autonomous soft robots.

DNA-based constitutional dynamic networks as functional modules for logic gates and computing circuit operations

A nucleic acid-based constitutional dynamic network (CDN) is introduced as a single computational module that, in the presence of different sets of inputs, operates a variety of logic gates including a half adder, 2 : 1 multiplexer and 1 : 2 demultiplexer, a ternary multiplication matrix and a cascaded logic circuit. The CDN-based computational module leads to four logically equivalent outputs for each of the logic operations. Beyond the significance of the four logically equivalent outputs in establishing reliable and robust readout signals of the computational module, each of the outputs may be fanned out, in the presence of different inputs, to a set of different logic circuits. In addition, the ability to intercommunicate constitutional dynamic networks (CDNs) and to construct DNA-based CDNs of higher complexity provides versatile means to design computing circuits of enhanced complexity.

Triggered Dimerization and Trimerization of DNA Tetrahedra for Multiplexed miRNA Detection and Imaging of Cancer Cells

The reversible and switchable triggered reconfiguration of tetrahedra nanostructures from monomer tetrahedra structures into dimer or trimer structures is introduced. The triggered bridging of monomer tetrahedra by K⁺ -ion-stabilized G-quadruplexes or T-A•T triplexes leads to dimer or trimer tetrahedra structures that are separated by crown ether or basic pH conditions, respectively. The signal-triggered dimerization/trimerization of DNA tetrahedra structures is used to develop multiplexed miRNA-sensing platforms, and the tetrahedra mixture is used for intracellular sensing and imaging of miRNAs.

Cofactor-assisted three-way DNA junction-driven strand displacement

Toehold-mediated strand displacement is widely used to construct and operate DNA nanodevices. Cooperative regulation of strand displacement with diverse factors is pivotal in the design and construction of functional and dynamic devices. Herein, a cofactor-assisted three-way DNA junction-driven strand displacement strategy was reported, which could tune the reaction kinetics by the collaboration of DNA and other types of stimulus. This strategy is responsive to various inputs by incorporation of the specific sequence into the three-way junction structure. Specifically, the cooperation of multiple factors changes the conformation of the specific domain and promotes the reaction. To demonstrate the strategy, adenosine triphosphate (ATP), HG²⁺, and pH were used as cofactors to modulate the displacement reaction. The electrophoresis and fluorescence experiments showed that the cooperative regulation of the strand displacement reaction could be achieved by diverse factors using this strategy. The proposed strategy provides design flexibility for dynamic DNA devices and may have potential in biosensing and biocomputing.

Cooperative regulation of strand displacement with diverse factors was achieved by a cofactor-assisted three-way DNA junction-driven strategy. Using this strategy nanodevices reacted to various inputs by incorporating a specific sequence into the three-way junction structure.

pH-Controlled Detachable DNA Circuitry and Its Application in Resettable Self-Assembly of Spherical Nucleic Acids

Toehold-mediated strand displacement reaction, the fundamental basis in dynamic DNA nanotechnology, has proven its extraordinary power in programming dynamic molecular systems. Programmed activation of the toehold in a DNA substrate is crucial for building sophisticated DNA devices with digital and dynamic behaviors. Here we developed a detachable DNA circuit by embedding a pH-controlled intermolecular triplex between the toehold and branch migration domain of the traditional "linear substrate". The reaction rate and the "on/off" state of the detachable circuit can be regulated by varying the pHs. Similarly, a two-input circuit composed of three pH-responsive DNA modules was then constructed. Most importantly, a resettable self-assembly system of spherical nucleic acids was built by utilizing the high detachability of the intermolecular triplex structure-based DNA circuit. This work demonstrated a dynamic DNA device that can be repeatedly operated at constant temperature without generating additional waste DNA products. Moreover, this strategy showed an example of recycling waste spherical nucleic acids from a self-assembly system of spherical nucleic acids. Our strategy will provide a facile approach for dynamic regulation of complex molecular systems and reprogrammable nanoparticle assembly structures.

Interlocked DNA Nanojoints for Reversible Thermal Sensing

The ability to precisely measure and monitor temperature at high resolution at the nanoscale is an important task for better understanding the thermodynamic properties of functional entities at the nanoscale in complex systems, or at the level of a single cell. However, the development of high-resolution and robust thermal nanosensors is challenging. The design, assembly, and characterization of a group of thermal-responsive deoxyribonucleic acid (DNA) joints, consisting of two interlocked double-stranded DNA (dsDNA) rings, is described. The DNA nanojoints reversibly switch between the static and mobile state at different temperatures without a special annealing process. The temperature response range of the DNA nanojoint can be easily tuned by changing the length or the sequence of the hybridized region in its structure, and because of its interlocked structure the temperature response range of the DNA nanojoint is largely unaffected by its own concentration; this contrasts with systems that consist of separated components.

Controlling Matter at the Molecular Scale with DNA Circuits

In recent years, a diverse set of mechanisms have been developed that allow DNA strands with specific sequences to sense information in their environment and to control material assembly, disassembly, and reconfiguration. These sequences could serve as the inputs and outputs for DNA computing circuits, enabling DNA circuits to act as chemical information processors to program complex behavior in chemical and material systems. This review describes processes that can be sensed and controlled within such a paradigm. Specifically, there are interfaces that can release strands of DNA in response to chemical signals, wavelengths of light, pH, or electrical signals, as well as DNA strands that can direct the self-assembly and dynamic reconfiguration of DNA nanostructures, regulate particle assemblies, control encapsulation, and manipulate materials including DNA crystals, hydrogels, and vesicles. These interfaces have the potential to enable chemical circuits to exert algorithmic control over responsive materials, which may ultimately lead to the development of materials that grow, heal, and interact dynamically with their environments.

Rational design of aptamer switches with programmable pH response

Aptamer switches that respond sensitively to pH could enhance control over molecular devices, improving their diagnostic and therapeutic efficacy. Previous designs have inserted pH-sensitive DNA motifs into aptamer sequences. Unfortunately, their performance was limited by the motifs' intrinsic pH-responses and could not be tuned to operate across arbitrary pH ranges. Here, we present a methodology for converting virtually any aptamer into a molecular switch with pH-selective binding properties - in acidic, neutral, or alkaline conditions. Our design inserts two orthogonal motifs that can be manipulated in parallel to tune pH-sensitivity without altering the aptamer sequence itself. From a single ATP aptamer, we engineer pH-controlled target binding under diverse conditions, achieving pH-induced selectivity in affinity of up to 1,000-fold. Importantly, we demonstrate the design of tightly regulated aptamers with strong target affinity over only a narrow pH range. Our approach offers a highly generalizable strategy for integrating pH-responsiveness into molecular devices.

Programmable Bivalent Peptide-DNA Locks for pH-Based Control of Antibody Activity

The ability to control antibody activity by pH has important applications in diagnostics, therapeutic antibody targeting, and antibody-guided imaging. Here, we report the rational design of bivalent peptide-DNA ligands that allow pH-dependent control of antibody activity. Our strategy uses a pH-responsive DNA triple helix to control switching from a tight-binding bivalent peptide-DNA lock into a weaker-binding monovalent ligand. Different designs are introduced that allow antibody activation at both basic and acidic pHs, either autonomously or in the presence of an additional oligonucleotide trigger. The pH of antibody activation could be precisely tuned by changing the DNA triple helix sequence. The peptide-DNA locks allowed pH-dependent antibody targeting of tumor cells both in bulk and for single cells confined in water-in-oil microdroplets. The latter approach enables high-throughput antibody-mediated detection of single tumor cells based on their distinctive metabolic activity.

5-Carboxylcytosine and Cytosine Protonation Distinctly Alter the Stability and Dehybridization Dynamics of the DNA Duplex

Applications associated with nucleobase protonation events are grounded in their fundamental impact on DNA thermodynamics, structure, and hybridization dynamics. Of the canonical nucleobases, N3 protonation of cytosine (C) is the most widely utilized in both biology and nanotechnology. Naturally occurring C derivatives that shift the N3 pK_a introduce an additional level of tunability. The epigenetic nucleobase 5-carboxylcytosine (caC) presents a particularly interesting example since this derivative forms Watson-Crick base pairs of similar stability and displays pH-dependent behavior over the same range as the canonical nucleobase. However, the titratable group in caC corresponds to the exocyclic carboxyl group rather than N3, and the implications of these divergent protonation events toward DNA hybridization thermodynamics, kinetics, and base pairing dynamics remain poorly understood. Here, we study the pH dependence of these physical properties using model oligonucleotides containing C and caC with FTIR and temperature-jump IR spectroscopy. We demonstrate that N3 protonation of C completely disrupts duplex stability, leading to large shifts in the duplex/single-strand equilibrium, a reduction in the cooperativity of melting, and an acceleration in the rate of duplex dissociation. In contrast, while increasing 5-carboxyl protonation in caC-containing duplexes induces an increase in base pair fluctuations, the DNA duplex can tolerate substantial protonation without significant perturbation to the duplex/single-strand equilibrium. However, 5-carboxyl protonation has a large impact on hybridization kinetics by reducing the transition state free energy. Our thermodynamic and kinetic analysis provides new insight on the impact of two divergent protonation mechanisms in naturally occurring nucleobases on the biophysical properties of DNA.

Conformational enhancement of fidelity in toehold-sequestered DNA nanodevices

Simple design principles improve conformational stability and decrease strand leakage by two orders of magnitude.

Sensitive Detection of Argonaute2 by Triple-Helix Molecular Switch Reaction and Pyrene Excimer Switching

RNA interference (RNAi) is a powerful tool for silencing target genes in a variety of cells and has great therapeutic potential. It is triggered by small interfering RNAs (siRNAs) and by an RNA-binding protein (argonaute, Ago). In this manuscript, we designed a simple fluorescence sensor strategy for sensitive detection of argonaute2 (Ago2) based on the base pairing principle of Watson–Crick and Hoogsteen and the pyrene excimer switch. The sensing platform has extremely high sensitivity and a detection limit of 0.1nM. It can be used to detect endogenous Ago2 in cancer cells and has great potential in clinical diagnosis and biomedical research.

Precise Cross-Dimensional Regulation of the Structure of a Photoreversible DNA Nanoswitch

In this study, an accurately and digitally regulated allosteric nanoswitch based on the conformational control of two DNA hairpins was developed. By switching between UV irradiation and blue light conditions, the second molecular beacon (H#2) would bind/separate with a repression sequence (RES) via the introduced PTG molecules (a photosensitive azobenzene derivative), resulting in the target aptamer sequence in the first molecular beacon (H#1) not being able/being able to hold the stem-loop configuration, hence losing/regaining the ability to bind with the target. Importantly, we successfully monitor conformation changes of the nanoswitch by an elegant mathematical model for connecting K_i (the dissociation constant between RES and H#2) with K_d (the overall equilibrium constant of the nanoswitch binding the target), hence realizing "observing" DNA structure across dimensions from "structural visualization" to digitization and, accurately, digitally regulating DNA structure from digitization to "structural visualization".

Dynamic DNA nanostructures in biomedicine: Beauty, utility and limits

DNA composite materials are at the forefront, especially for biomedical science, as they can increase the efficacy and safety of current therapies and drug delivery systems. The specificity and predictability of the Watson-Crick base pairing make DNA an excellent building material for the production of programmable and multifunctional objects. In addition, the principle of nucleic acid hybridization can be applied to realize mobile nanostructures, such as those reflected in DNA walkers that sort and collect cargo on DNA tracks, DNA robots performing tasks within living cells and/or DNA tweezers as ultra-sensitive biosensors. In this review, we present the diversity of dynamic DNA nanostructures functionalized with different biomolecules/functional units, imaging smart biomaterials capable of sensing, interacting, delivery and performing complex tasks within living cells/organisms.

Aptamer Displacement Reaction from Live-Cell Surfaces and Its Applications

The DNA strand displacement reaction has had sustained scientific interest in building complicated nucleic acid-based networks. However, extending the fundamental mechanism to more diverse biomolecules in a complex environment remains challenging. Aptamers bind with targeted biomolecules with high affinity and selectivity, thus offering a promising route to link the powers of nucleic acid with diverse cues. Here, we describe three methods that allow facile and efficient displacement reaction of aptamers from the living cell surface using complement DNA (cDNA), toehold-labeled cDNA (tcDNA), and single-stranded binding protein (SSB). The kinetics of the DNA strand displacement reaction is severely affected by complex physicochemical properties of the natural membrane. Toehold-mediated and SSB-mediated aptamer displacement exhibited significantly enhanced kinetics, and they completely removed the aptamer quickly to avoid a false signal caused by aptamer internalization. Because of its simplicity, aptamer displacement enabled detection of membrane protein post-translation and improved selection efficiency of cell-SELEX.

Toehold-Mediated Strand Displacement in a Triplex Forming Nucleic Acid Clamp for Reversible Regulation of Polymerase Activity and Protein Expression

Triplex forming oligonucleotides are used as a tool for gene regulation and in DNA nanotechnology. By incorporating artificial nucleic acids, target affinity and biological stability superior to that of natural DNA may be obtained. This work demonstrates how a chimeric clamp consisting of acyclic (L)-threoninol nucleic acid (aTNA) and DNA can bind DNA and RNA by the formation of a highly stable triplex structure. The (L)-aTNA clamp is released from the target again by the addition of a releasing strand in a strand displacement type of reaction. It is shown that the clamp efficiently inhibits Bsu and T7 RNA polymerase activity and that polymerase activity is reactivated by displacing the clamp. The clamp was successfully applied to the regulation of luciferase expression by reversible binding to the mRNA. When targeting a sequence in the double stranded plasmid, 40 % downregulation of protein expression is achieved.

Engineering a responsive DNA triple helix into an octahedral DNA nanostructure for a reversible opening/closing switching mechanism: a computational and experimental integrated study

We propose an experimental and simulative approach to study the effect of integrating a DNA functional device into a large-sized DNA nanostructure. We selected, as a test bed, a well-known and characterized pH-dependent clamp-switch, based on a parallel DNA triple helix, to be integrated into a truncated octahedral scaffold. We designed, simulated and experimentally characterized two different functionalized DNA nanostructures, with and without the presence of a spacer between the scaffold and the functional elements. The experimental and simulative data agree in validating the need of a spacer for the occurrence of the pH dependent switching mechanism. The system is fully reversible and the switching can be monitored several times without any perturbation, maintaining the same properties of the isolated clamp switch in solution.

Principles and Applications of Nucleic Acid Strand Displacement Reactions

Dynamic DNA nanotechnology, a subfield of DNA nanotechnology, is concerned with the study and application of nucleic acid strand-displacement reactions. Strand-displacement reactions generally proceed by three-way or four-way branch migration and initially were investigated for their relevance to genetic recombination. Through the use of toeholds, which are single-stranded segments of DNA to which an invader strand can bind to initiate branch migration, the rate with which strand displacement reactions proceed can be varied by more than 6 orders of magnitude. In addition, the use of toeholds enables the construction of enzyme-free DNA reaction networks exhibiting complex dynamical behavior. A demonstration of this was provided in the year 2000, in which strand displacement reactions were employed to drive a DNA-based nanomachine (Yurke, B.; et al. Nature 2000, 406, 605-608). Since then, toehold-mediated strand displacement reactions have been used with ever increasing sophistication and the field of dynamic DNA nanotechnology has grown exponentially. Besides molecular machines, the field has produced enzyme-free catalytic systems, all DNA chemical oscillators and the most complex molecular computers yet devised. Enzyme-free catalytic systems can function as chemical amplifiers and as such have received considerable attention for sensing and detection applications in chemistry and medical diagnostics. Strand-displacement reactions have been combined with other enzymatically driven processes and have also been employed within living cells (Groves, B.; et al. Nat. Nanotechnol. 2015, 11, 287-294). Strand-displacement principles have also been applied in synthetic biology to enable artificial gene regulation and computation in bacteria. Given the enormous progress of dynamic DNA nanotechnology over the past years, the field now seems poised for practical application.