Multifunctional Nanostructures Based on Inorganic Nanoparticles and Oligothiophenes and Their Exploitation for Cellular Studies

Recent Advances in Magnetic Upconversion Nanocomposites for Bioapplications

The combination of magnetism and upconversion luminescent property into one single nanostructure is fascinating for biological fields, such as multimodal bioimaging, targeted drug delivery, and imaging-guided therapy. In this review, we will provide the state-of-the-art advances on magnetic upconversion nanocomposites towards their bioapplications. Their structure design, synthesis methods, surface engineering and applications in bioimaging, drug delivery, therapy as well as biodetection will be covered.

Colorimetric determination of glucose in solution and via the use of a paper strip by exploiting the peroxidase and oxidase mimicking activity of bimetallic Cu-Pd nanoparticles deposited on reduced graphene oxide, graphitic carbon nitride, or MoS2 nanosheets

This work describes the preparation of bimetallic Cu-Pd nanoparticles (NPs) on supports like reduced graphene oxide (rGO), graphitic carbon nitride (g-C₃N₄) and MoS₂ sheets with a size of <10 nm. rGO is found to be the best support for synthesizing Cu-Pd NPs with controlled shape, size and oxidation state. The Cu-Pd/rGO nanocomposite also demonstrated the best peroxidase and oxidase mimicking activity compared to Cu-Pd/g-C₃N₄ and Cu-Pd/MoS₂ nanocomposites. The peroxidase mimicking activity of Cu-Pd/rGO was investigated in more detail, and a glucose oxidase (GOx) based glucose sensor was constructed that is based on the enzymatic formation of H₂O₂ and the Cu-Pd NPs-assisted oxidation of tetramethylbenzidine by H₂O₂ to give a blue-green coloration with absorption maxima at 652 nm. The assay has a 0.29 μM detection limit and a detection range that extends from 0.2 to 50 μM. The method was applied to the determination of glucose in diluted serum samples, and results compared well to those acquired with a clinical analyzer. The method also was applied in a colorimetric paper-based test stripe that can detect glucose within 10 min. Graphical abstract Schematic representation of a sensitive colorimetric glucose assay based on bimetallic Cu-Pd nanoparticles supported on 2D nanosheets, and construction of a paper based device for rapid glucose detection.

Tuning the architectural integrity of high-performance magneto-fluorescent core-shell nanoassemblies in cancer cells

High-density nanoarchitectures, endowed with simultaneous fluorescence and contrast properties for MRI and TEM imaging, have been obtained using a simple self-assembling strategy based on supramolecular interactions between non-doped fluorescent organic nanoparticles (FON) and superparamagnetic nanoparticles. In this way, a high-payload core-shell structure FON@mag has been obtained, protecting the hydrophobic fluorophores from the surroundings as well as from emission quenching by the shell of magnetic nanoparticles. Compared to isolated nanoparticles, maghemite nanoparticles self-assembled as an external shell create large inhomogeneous magnetic field, which causes enhanced transverse relaxivity and exacerbated MRI contrast. The magnetic load of the resulting nanoassemblies is evaluated using magnetic sedimentation and more originally electrospray mass spectrometry. The role of the stabilizing agents (citrate versus polyacrylate anions) revealed to be crucial regarding the cohesion of the resulting high-performance magneto-fluorescent nanoassemblies, which questions their use after cell internalization as nanocarriers or imaging agents for reliable correlative light and electron microcopy.

Vesicle self-assembly of amphiphilic siderophores produced by bacterial isolates from Soap Lake, Washington

Soap Lake, located in Washington State, is a meromictic soda lake that was the subject of a prior National Science Foundation funded Microbial Observatory. Several organisms inhabiting this lake have been identified as producers of siderophores that are unique in structure. Two isolates found to be of the species Halomonas, SL01 and SL28, were found to produce suites of amphiphilic siderophores consisting of a peptidic head-group, which binds iron appended to fatty acid moieties of various lengths. The ability for siderophores to self-assemble into vesicles was determined for three suites of amphiphilic siderophores of unique structure (two from SL01 and one from SL28). These siderophores resemble the amphiphilic aquachelin siderophores produced by Halomonas aquamarina strain DS40M3, a marine bacterium. Vesicle self-assembly studies were performed by dynamic light scattering and epifluorescence microscopy. The addition of ferric iron (Fe3+) at different equivalents, where an equivalence of iron is defined as equal to the molarity of the siderophore, demonstrated vesicle formation. This was suggested by both dynamic light scattering and epifluorescence microscopy. Bacteria thriving under saline and alkaline conditions are capable of producing unique siderophores that self-assemble in micelles and vesicles due to ferric iron chelation.

Humic acid-assisted synthesis of stable copper nanoparticles as a peroxidase mimetic and their application in glucose detection

In this report, stable copper nanoparticles (Cu NPs) were prepared through a facile annealing process using humic acid as the reducing and stabilizing agents. The products were characterized by X-ray powder diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The prepared Cu NPs show remarkably intrinsic peroxidase-like activity, which can rapidly catalyze the oxidation of the peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), in the presence of H₂O₂ to produce a blue-color reaction. The detection limit of H₂O₂ by Cu NPs can be as low as 1.32 × 10^-7 M. More importantly, the prepared Cu NPs show excellent stability, which can hardly be oxidized even after 6 months. Based on the aforementioned mechanism, a simple, rapid and selective colorimetric method for glucose detection was developed, and the detection limit of glucose was 6.86 × 10^-7 M. This study provides a novel method for the preparation of stable Cu NPs, which may have widespread applications in the detection of glucose in the human body and pear juice.

Surface charge effect on the cellular interaction and cytotoxicity of NaYF4:Yb3+, Er3+@SiO2 nanoparticles

The positively charged UCNP@SiO₂-PEG-NH₂ exhibits higher cytotoxicity and cellular internalization efficiency than negatively charged UCNP@SiO₂-COOH and UCNP@SiO₂-PEG.

Fluorescent thiophene-based materials and their outlook for emissive applications

An overview of fluorescent thiophene-based materials and their applications, highlighting in particular the various methods employed to achieve highly emissive materials.

The geometry relaxation and intersystem crossing of quaterthiophene studied by femtosecond spectroscopy

The geometry relaxation in the singlet state and the intersystem crossing from relaxed singlet to triplet state are 70 and 398 ps, respectively.

Highly cohesive dual nanoassemblies for complementary multiscale bioimaging

Core–shell nanoarchitectures made of non-doped fluorescent organic platforms capped with magnetic nanoparticles display high bioimaging performances.

Caging of plumbagin on silver nanoparticles imparts selectivity and sensitivity to plumbagin for targeted cancer cell apoptosis

Nano-caging of plumbagin for selective killing of cancer cells.

Towards polymetallic lanthanide complexes as dual contrast agents for magnetic resonance and optical imaging

In the spotlight: polymetallic complexes permitting efficient sensitization of lanthanide luminescence and exhibiting favorable relaxometric properties.

Magnetic iron oxide–fluorescent carbon dots integrated nanoparticles for dual-modal imaging, near-infrared light-responsive drug carrier and photothermal therapy

The multifunctional hybrid nanoparticles described demonstrate great promise towards advanced nanoplatforms for simultaneous imaging diagnostics and high efficacy therapy.

Enabling antibacterial coating via bioinspired mineralization of nanostructured ZnO on fabrics under mild conditions

Herein, we present an environmentally benign method capable of mineralization and deposition of nanomaterials to introduce antibacterial functionalities into cotton fabrics under mild conditions. Similar to the way in which many naturally occurring biominerals evolve around the living organism under ambient conditions, this technique enables flexible substrates like the cotton fabric to be coated with inorganic-based functional materials. Specifically, our strategy involves the use of long-chain polyamines known to be responsible in certain biomineralization processes, to nucleate, organize, and deposit nanostructured ZnO on cotton bandage in an aqueous solution under mild conditions of room temperature and neutral pH. The ZnO-coated cotton bandages as characterized by SEM, confocal micro-Raman spectroscopy, XRD, UV-DRS, and fluorescence microscopy demonstrate the importance of polyamine in generating a stable and uniform coating of spindle-shaped ZnO particles on individual threads of the fabric. As the coating process requires only mild conditions, it avoids any adverse effect on the thermal and mechanical properties of the substrate. Furthermore, the ZnO particles on cotton fabric show efficient antibacterial activity against both gram-positive and gram-negetive bacteria. Therefore, the developed polyamine mediated bioinspired coating method provides not only a facile and "green" synthesis for coating on flexible substrate but also the fabrication of antibacterial enabled materials for healthcare applications.

pH controlled staining of CD4(+) and CD19(+) cells within functionalized microfluidic channel

Herein proposed is a simple system to realize hands-free labeling and simultaneous detection of two human cell lines within a microfluidic device. This system was realized by novel covalent immobilization of pH-responsive poly(methacrylic acid) microgels onto the inner glass surface of an assembled polydimethylsiloxane/glass microfluidic channel. Afterwards, selected thiophene labeled monoclonal antibodies, specific for recognition of CD4 antigens on T helper/inducer cells and CD19 antigens on B lymphocytes cell lines, were encapsulated in their active state by the immobilized microgels. When the lymphocytes suspension, containing the two target subpopulations, was flowed through the microchannel, the physiological pH of the cellular suspension induced the release of the labeled antibodies from the microgels and thus the selective cellular staining. The selective pH-triggered staining of the CD4- and CD19-positive cells was investigated in this preliminary experimental study by laser scanning confocal microscopy. This approach represents an interesting and versatile tool to realize cellular staining in a defined module of lab-on-a-chip devices for subsequent detection and counting.

Polymer coated inorganic nanoparticles: tailoring the nanocrystal surface for designing nanoprobes with biological implications

The use of inorganic nanoparticles in biomedicine, in particular in the field of diagnosis and therapy of human diseases, has rapidly grown in the last few decades. Water solubilisation of the nanoparticles, especially for particles synthesized in non-polar solvents, is an essential prerequisite for their biological exploitation. The encapsulation of surfactant coated nanoparticles into polymer shells represents one of the most suitable and most popular methods to make them water soluble. Herein we provide an overview of the amphiphilic polymer molecules used and the efforts undertaken to further tailor the surface of polymer coated nanoparticles with fluorescent dyes, chemical sensor molecules and small or large biomolecules for the preparation of bio-functional nanoprobes. Their biological implications, highlighting limitations and challenges, are also discussed.

Oligothiophenes as fluorescent markers for biological applications

This paper summarizes some of our results on the application of oligothiophenes as fluorescent markers for biological studies. The oligomers of thiophene, widely known for their semiconductor properties in organic electronics, are also fluorescent compounds characterized by chemical and optical stability, high absorbance and quantum yield. Their fluorescent emission can be easily modulated via organic synthesis by changing the number of thiophene rings and the nature of side-chains. This review shows how oligothiophenes can be derivatized with active groups such as phosphoramidite, N-hydroxysuccinimidyl and 4-sulfotetrafluorophenyl esters, isothiocyanate and azide by which the (bio)molecules of interest can be covalently bound. This paper also describes how molecules such as oligonucleotides, proteins and even nanoparticles, tagged with oligothiophenes, can be used in experiments ranging from hybridization studies to imaging of fixed and living cells. Finally, a few multilabeling experiments are described.

Cytotoxicity of naphthoquinones and their capacity to generate reactive oxygen species is quenched when conjugated with gold nanoparticles

Several reports have demonstrated the anticancer activities of plumbagin, a naphthoquinone derivative isolated from plants belonging to Plumbaginaceae family. However, to the best of our knowledge, there are no reports which describe gold nanoconjugation with plumbagin, even though plumbagin is considered to be a promising therapeutic agent. In this report, we demonstrate the fabrication and characterization of gold nanoparticles conjugated with plumbagin (AuPB) that can reduce the toxicity of the latter, and their capacity for cellular localization and generation of reactive oxygen species. The anticancer activity and ability of plumbagin to produce reactive oxygen species was studied and compared with that of bromoderivatives of 1,4 naphthoquinones such as 2-bromo-1,4-naphthoquinone (2-BNQ) and 2,3-dibromo-1, 4-naphthoquinone (2,3-DBNQ) and their gold nanoconjugates. Plumbagin and bromoderivatives of 1,4 naphthoquinones in the form of gold nanoconjugates showed reduced cytotoxicity and apoptosis compared with the pristine compounds, ie, plumbagin, 2-BNQ, and 2,3-DBNQ. Interestingly, we observed that the gold nanoparticles could quench the reactive oxygen species-generating capacity of plumbagin, 2-BNQ, and 2,3-BNQ, which is one of the main mechanisms of action of the naphthoquinones. Therefore, it can be concluded that conjugation with gold nanoparticles can reduce the cytotoxicity of these compounds.

Porphyrin-magnetite nanoconjugates for biological imaging

Background

The use of silica coated magnetic nanoparticles as contrast agents has resulted in the production of highly stable, non-toxic solutions that can be manipulated via an external magnetic field. As a result, the interaction of these nanocomposites with cells is of vital importance in understanding their behaviour and biocompatibility. Here we report the preparation, characterisation and potential application of new "two-in-one" magnetic fluorescent nanocomposites composed of silica-coated magnetite nanoparticles covalently linked to a porphyrin moiety.

Method

The experiments were performed by administering porphyrin functionalised silica-coated magnetite nanoparticles to THP-1 cells, a human acute monocytic leukaemia cell line. Cells were cultured in RPMI 1640 medium with 25 mM HEPES supplemented with heat-inactivated foetal bovine serum (FBS).

Results

We have synthesised, characterised and analysed in vitro, a new multimodal (magnetic and fluorescent) porphyrin magnetic nanoparticle composite (PMNC). Initial co-incubation experiments performed with THP-1 macrophage cells were promising; however the PMNC photobleached under confocal microscopy study. β-mercaptoethanol (β-ME) was employed to counteract this problem and resulted not only in enhanced fluorescence emission, but also allowed for elongated imaging and increased exposure times of the PMNC in a cellular environment.

Conclusion

Our experiments have demonstrated that β-ME visibly enhances the emission intensity. No deleterious effects to the cells were witnessed upon co-incubation with β-ME alone and no increases in background fluorescence were recorded. These results should present an interest for further development of in vitro biological imaging techniques.

Multimodal imaging probes based on Gd-DOTA conjugated quantum dot nanomicelles

Recently, multimodal nanoparticles integrating dual- or tri-imaging modalities into a single hybrid nanosystem have attracted plenty of attention in biomedical research. Here, we report the fabrication of two types of multimodal micelle-encapsulated nanoparticles, which were systematically characterized and thoroughly evaluated in terms of their imaging potential and biocompatibility. Optical and magnetic resonance (MR) imaging probes were integrated by conjugating DOTA-gadolinium (Gd) derivative to quantum dot based nanomicelles. Two amphiphilic block copolymer micelles, amine-terminated mPEG-phospholipid and amine-modified Pluronic F127, were chosen as the capping agents because of their excellent biocompatibility and ability to prevent opsonization and prolong circulation time in vivo. Owing to their different hydrophobic-hydrophilic structure, the micellar aggregates exhibited different sizes and protection of core QDs. This work revealed the differences between these nanomicelles in terms of the stability over a wide range of pH, along with their cytotoxicity and the capacity for chelating gadolinium, thus providing a useful guideline for tailor-making multimodal nanoparticles for specific biomedical applications.

Multifunctional nanobeads based on quantum dots and magnetic nanoparticles: synthesis and cancer cell targeting and sorting

Trifunctional polymer nanobeads are prepared by destabilization of a mixture of magnetic nanoparticles, quantum dots, and an amphiphilic polymer, followed by functionalization of the bead surface with folic acid molecules. The distribution of the nanoparticles within the nanobeads can be tuned using either acetonitrile or water as destabilizing solvent. The luminescence of the resulting beads can be tuned by varying the ratio of quantum dots per magnetic nanoparticles. The application of an external magnetic field (such as a small static magnet of 0.3 T) to the magnetic-fluorescent nanobeads allows the quantitative accumulation of the beads within a few hours depending on the total size of the beads. Furthermore, specific targeting of cancer cells overexpressing folate receptors is achieved thanks to the folic acid decorating the surface of the as-synthesized nanobeads. Folate receptor mediated cellular uptake of the folic acid-functionalized nanobeads is proven via both confocal imaging and transmission electron microscopy characterization. Cell sorting experiments performed with trifunctional nanobeads show quantitative recovering of targeted cells even when they are present at low percentage (up to 1%).

Fluorescent-magnetic-biotargeting multifunctional nanobioprobes for detecting and isolating multiple types of tumor cells

Fluorescent-magnetic-biotargeting multifunctional nanobioprobes (FMBMNs) have attracted great attention in recent years due to their increasing, important applications in biomedical research, clinical diagnosis, and biomedicine. We have previously developed such nanobioprobes for the detection and isolation of a single kind of tumor cells. Detection and isolation of multiple tumor markers or tumor cells from complex samples sensitively and with high efficiency is critical for the early diagnosis of tumors, especially malignant tumors or cancers, which will improve clinical diagnosis outcomes and help to select effective treatment approaches. Here, we expanded the application of the monoclonal antibody (mAb)-coupled FMBMNs for multiplexed assays. Multiple types of cancer cells, such as leukemia cells and prostate cancer cells, were detected and collected from mixed samples within 25 min by using a magnet and an ordinary fluorescence microscope. The capture efficiencies of mAb-coupled FMBMNs for the above-mentioned two types of cells were 96% and 97%, respectively. Furthermore, by using the mAb-coupled FMBMNs, specific and sensitive detection and rapid separation of a small number of spiked leukemia cells and prostate cancer cells in a large population of cultured normal cells (about 0.01% were tumor cells) were achieved simply and inexpensively without any sample pretreatment before cell analysis. Therefore, mAb-coupled multicolor FMBMNs may be used for very sensitive detection and rapid isolation of multiple cancer cells in biomedical research and medical diagnostics.

Synthesis and spectroscopic properties of silica-dye-semiconductor nanocrystal hybrid particles

We prepared silica-dye-nanocrystal hybrid particles and studied the energy transfer from semiconductor nanocrystals (= donor) to organic dye molecules (= acceptor). Multishell CdSe/CdS/ZnS semiconductor nanocrystals were adsorbed onto monodisperse Stöber silica particles with an outer silica shell of thickness 2-23 nm containing organic dye molecules (Texas Red). The thickness of this dye layer has a strong effect on the energy transfer efficiency, which is explained by the increase in the number of dye molecules homogeneously distributed within the silica shell, in combination with an enhanced surface adsorption of nanocrystals with increasing dye amount. Our conclusions were underlined by comparison of the experimental results with numerically calculated FRET efficiencies and by control experiments confirming attractive interaction between the nanocrystals and Texas Red freely dissolved in solution.

Bimodal magnetic-fluorescent probes for bioimaging

Fluorescent optical probes have been intensively used in the area of bio-imaging. In this review article, we describe the recent advancements in the synthesis and application of bimodal magnetic-fluorescent probes for bioimaging. The bimodal probes consist of fluorescent [semiconducting quantum dots (e.g., CdSe/ZnS) or rare-earth doped (e.g., NaYF(4) :Yb,Er)] nanoparticles (NPs) and magnetic (iron oxide or gadolinium based) NPs for optical and magnetic resonance (MR) imaging.

Robust Fe3O4/SiO2-Pt/Au/Pd magnetic nanocatalysts with multifunctional hyperbranched polyglycerol amplifiers

Here we report a facile approach to prepare multicarboxylic hyperbranched polyglycerol (HPG)-grafted SiO(2)-coated iron oxide (Fe(3)O(4)/SiO(2)) magnetic hybrid support. This support combined the both features of Fe(3)O(4) and HPG, facile magnetic separation, and favorable molecular structure with numerous functional groups. With the use of the grafted-HPGs as templates, various noble metal nanocatalysts such as Pt, Au, and Pd were directly grown on the surfaces of magnetic support with ultrasmall and nearly monodisperse sizes (e.g., the average sizes of Pt, Au, and Pd are 4.8 +/- 0.5, 6.0 +/- 0.6, and 4.0 +/- 0.4 nm, respectively) and high coverage densities. Because of the amplification effect of HPG, high loading capacities of the nanocatalysts, around 0.296, 0.243, and 0.268 mmol/g for Pt, Au, and Pd, respectively, were achieved. Representative catalytic reactions including reduction of 4-nitrophenol, alcohol oxidation, and Heck reaction demonstrated the high catalytic activity of the noble metal nanocatalysts. Because of the stabilization of HPG templates, the nanocatalysts can be readily recycled by a magnet and reused for the next reactions with high efficiencies. The robust multifunctional magnetic hybrids will find important applications in catalysis and other fields such as drug delivery and bioseparations.

Uptake and distribution of labeled antibodies into pH-sensitive microgels

We investigated the uptake and release of labeled antibodies from pH-sensitive hydrogel microparticles (i.e. microgels) by means of fluorescence analysis of labeled biological samples. The poly(methacrylic acid) (PMAA) hydrogel is a carbon-based network having carboxylic groups on the surface that dissociate according to their acid-base equilibrium. The ability of the PMAA microgel to encapsulate and release anti-CD4 and anti-CD8 monoclonal antibodies (MAbs), differing for the isotype and labeled with highly photostable fluorophore, was studied in solution by photoluminescence spectroscopy. The experimental results indicated that the uptake and release of the tested antibodies were controlled by pH. Furthermore, confocal microscopy analysis in the solid state revealed that the distribution of the labeled antibodies either on the surface or in the core of the microgel matrix was related to the specific properties of these MAbs.

Fluorescent-magnetic hybrid nanoparticles induce a dose-dependent increase in proinflammatory response in lung cells in vitro correlated with intracellular localization

Iron-platinum nanoparticles embedded in a poly(methacrylic acid) (PMA) polymer shell and fluorescently labeled with the dye ATTO 590 (FePt-PMA-ATTO-2%) are investigated in terms of their intracellular localization in lung cells and potential to induce a proinflammatory response dependent on concentration and incubation time. A gold core coated with the same polymer shell (Au-PMA-ATTO-2%) is also included. Using laser scanning and electron microscopy techniques, it is shown that the FePt-PMA-ATTO-2% particles penetrate all three types of cell investigated but to a higher extent in macrophages and dendritic cells than epithelial cells. In both cell types of the defense system but not in epithelial cells, a particle-dose-dependent increase of the cytokine tumor necrosis factor alpha (TNFalpha) is found. By comparing the different nanoparticles and the mere polymer shell, it is shown that the cores combined with the shells are responsible for the induction of proinflammatory effects and not the shells alone. It is concluded that the uptake behavior and the proinflammatory response upon particle exposure are dependent on the time, cell type, and cell culture.

One example on how colloidal nano- and microparticles could contribute to medicine

Nanomedicine, nowadays, is a popular keyword in the media, although everyone seems to associate it with different visions, hopes and even fears. This article gives a perspective from two sides. From the point of view of a materials scientist, it will be pointed out what new materials will be possible, how they will be designed and which properties they could offer for diagnosis and treatment. From the point of view of a medical doctor, it will be pointed out which properties are actually desired and what materials are hoped for practical applications. The two different points of view indicate that, although sophisticated materials with advanced novel properties will be available in the future, they do not automatically match the requirements and demands of clinicians. The discussion is centerd around one example, multifunctional polyelectrolyte capsules, which might act as a ‘nanosubmarine’ for in vivo sensing and delivery, which is used to highlight promising interfaces between both disciplines.

Microwave-assisted synthesis of thiophene fluorophores, labeling and multilabeling of monoclonal antibodies, and long lasting staining of fixed cells

We report the expedient microwave-assisted synthesis of thiophene based 4-sulfo-2,3,5,6,-tetrafluorophenyl esters whose molecular structure was engineered to achieve blue to red bright fluorescence. The reactivity toward monoclonal antibodies of the newly synthesized fluorophores was analyzed in comparison with that of the corresponding N-succinimidyl esters. Single-fluorophore and multiple-fluorophore labeled antibodies were easily prepared with both types of esters. Multiple-fluorophore labeling with blue and orange emitting fluorophores resulted in white fluorescent antibodies. Thiophene based fluorophores displayed unprecedented fluorescence stability in immunostaining experiments. First-principles TD-DFT theoretical calculations helped us to interpret the behavior of fluorescence emission in different environments.

Fluorescent nanocrystals reveal regulated portals of entry into and between the cells of Hydra

Initially viewed as innovative carriers for biomedical applications, with unique photophysical properties and great versatility to be decorated at their surface with suitable molecules, nanoparticles can also play active roles in mediating biological effects, suggesting the need to deeply investigate the mechanisms underlying cell-nanoparticle interaction and to identify the molecular players. Here we show that the cell uptake of fluorescent CdSe/CdS quantum rods (QRs) by Hydra vulgaris, a simple model organism at the base of metazoan evolution, can be tuned by modifying nanoparticle surface charge. At acidic pH, amino-PEG coated QRs, showing positive surface charge, are actively internalized by tentacle and body ectodermal cells, while negatively charged nanoparticles are not uptaken. In order to identify the molecular factors underlying QR uptake at acidic pH, we provide functional evidence of annexins involvement and explain the QR uptake as the combined result of QR positive charge and annexin membrane insertion. Moreover, tracking QR labelled cells during development and regeneration allowed us to uncover novel intercellular trafficking and cell dynamics underlying the remarkable plasticity of this ancient organism.

Novel nanomedicine-based MRI contrast agents for gynecological malignancies

Gynecological cancers result in significant morbidity and mortality in women despite advances in treatment and diagnosis. This is due to detection of the disease in the late stages following metastatic spread in which treatment options become limited and may not result in positive outcomes. In addition, traditional contrast agents are not very effective in detecting primary metastatic tumors and cells due to a lack of specificity and sensitivity of the diagnostic tools, which limits their effectiveness. Recently, the field of nanomedicine-based contrast agents offers a great opportunity to develop highly sophisticated devices that can overcome many traditional hurdles of contrast agents including solubility, cell-specific targeting, toxicities, and immunological responses. These nanomedicine-based contrast agents including liposomes, micelles, dendrimers, multifunctional magnetic polymeric nanohybrids, fullerenes, and nanotubes represent improvements over their traditional counterparts, which can significantly advance the field of molecular imaging.