Fluorescence Self-Quenching of a Mannosylated Poly(p-phenyleneethynylene) Induced by Concanavalin A

Functionalization of Water-Soluble Conjugated Polymers for Bioapplications

Water-soluble conjugated polymers (WS-CPs) have found widespread use in bioapplications ranging from in vitro optical sensing to in vivo phototherapy. Modification of WS-CPs with specific molecular functional units is necessary to enable them to interact with biological targets. These targets include proteins, nucleic acids, antibodies, cells, and intracellular components. WS-CPs have been modified with covalently linked sugars, peptides, nucleic acids, biotin, proteins, and other biorecognition elements. The objective of this article is to comprehensively review the various synthetic chemistries that have been used to covalently link biofunctional groups onto WS-CP platforms. These chemistries include amidation, nucleophilic substitution, Click reactions, and conjugate addition. Different types of WS-CP backbones have been used as platforms including poly(fluorene), poly(phenylene ethynylene), polythiophene, poly(phenylenevinylene), and others. Example applications of biofunctionalized WS-CPs are also reviewed. These include examples of protein sensing, flow cytometry labeling, and cancer therapy. The major challenges and future development of functionalized conjugated polymers are also discussed.

Self-Assembly of an Amphiphilic Bile Acid Dimer: A Combined Experimental and Theoretical Study of Its Medium-Responsive Fluorescence

This work describes the synthesis and aggregation behavior of a dimeric bile acid derivative in which two steroid cores are bridged by a p-di(phenylethynyl)phenylene fluorophore. The studied compound contains three key characteristics: (a) restricted conformational equilibrium in solution, (b) efficient fluorescence conferred by the bridge, and (c) medium responsiveness encoded in the steroid fragments. The incorporation of the three components afforded a compound that generates nano- and micrometric spherical particles with aggregation-responsive fluorescence emission. The observed self-assembly process of the featured molecule was induced by the gradual addition of water to the tetrahydrofuran (THF) solution. This aggregation led to significant changes in fluorescence that went from two bands at λ_em values of 370 and 390 nm in pure THF to a new spectrum with two maxima at λ_em values of 395 and 418 nm at high water contents, without a decrease in emission. The observed changes can be ascribed to weakly coupled aggregation, a hypothesis supported by multiscale molecular modeling, which sheds light on the mechanism of the self-assembly of this unconventional amphiphile.

Aggregation-Induced Emission-Active Poly(phenyleneethynylene)s for Fluorescence and Raman Dual-Modal Imaging and Drug-Resistant Bacteria Killing

Poly(phenyleneethynylene) (PPE) is a widely used functional conjugated polymer with applications ranging from organic optoelectronics and fluorescence sensors to optical imaging and theranostics. However, the fluorescence efficiency of PPE in aggregate states is generally not as good as their solution states, which greatly compromises their performance in fluorescence-related applications. Herein, a series of PPE derivatives with typical aggregation-induced emission (AIE) properties is designed and synthesized. In these PPEs, the diethylamino-substituted tetraphenylethene units function as the long-wavelength AIE source and the alkyl side chains serve as the functionalization site. The obtained AIE-active PPEs with large π-conjugation show strong aggregate-state fluorescence, interesting self-assembly behaviors, inherently enhanced alkyne vibrations in the Raman-silent region of cells, and efficient antibacterial activities. The PPE nanoparticles with good cellular uptake capability can clearly and sensitively visualize the tumor region and residual tumors via their fluorescence and Raman signals, respectively, to benefit the precise tumor resection surgery. After post-functionalization, the obtained PPE-based polyelectrolyte can preferentially image bacteria over mammalian cells and possesses efficient photodynamic killing capability against Gram-positive and drug-resistant bacteria. This work provides a feasible design strategy for developing functional conjugated polymers with multimodal imaging capability as well as photodynamic antimicrobial ability.

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Fluorescence detection of pyrene-stained Bacillus subtilis LPM1 rhizobacteria from colonized patterns of tomato roots

A series of water soluble 8-alcoxypyrene-1,3,6-trisulfonic sodium salts bearing different alcoxy lateral chains and functional end groups was synthesized and the molecular structure was corroborated by nuclear magnetic resonance spectroscopy. The photophysical properties in water analyzed by UV-Vis and static and dynamic fluorescence revealed that all of the pigments emit in the blue region at a maximal wavelength of 436 nm and with fluorescence lifetimes in the range of ns. Among them, sodium 8-((10-carboxydecyl) oxy) pyrene-1,3,6-trisulfonate M1 exhibits a high fluorescence quantum yield (φ = 80%) and a good interaction with B. subtilis LPM1 rhizobacteria; this has been demonstrated through in vitro staining assays. Tomato plants (Solanum lycopersicon cv. Micro-Tom) increased the release of root exudates, mainly malic and fumaric acids, after 12 h of treatment with benzothiadiazole (BTH) as a foliar elicitor. However, the chemotaxis analysis demonstrated that malic acid is the most powerful chemoattractant of the rhizobacteria Bacillus subtilis LPM1: in agar plates, a major growth (60 mm) was found for a concentration of 100 mM, while in capillary tubes, the earliest response was at 30 min with 3.3 × 108 CFU mL-1. The confocal microscopic analysis carried out on the tomato roots of the pyrene stained B. subtilis LPM1 revealed that this bacterium mainly colonizes the epidermal zones, i.e. the junctions to primary roots, lateral roots and root hairs, meaning that these root hair sections are the highest colonisable sites involved in the biosynthesis of exudates. This fluorescent pyrene marker M1 represents a valuable tool to evaluate B. subtilis-plant interactions in an easy and quick test in both in vitro and in vivo tomato crops.

Biological Sensing and Imaging Using Conjugated Polymers and Peptide Substrates

Peptides have been widely applied as targeting elements or enzyme-substrates in biological sensing and imaging. Conjugated Polymers (CPs) have emerged as a novel biosensing material and received considerable attention due to their excellent light absorption, strong fluorescence emission, as well as amplified quenching properties. In this review, we summarize the recent advances of using CPs and peptide substrates in biosensing and bioimaging. After a brief introduction of the advantages of CPs and peptide substrates, different sensing designs and mechanisms are discussed based on peptides' structures and functions, including targeting recognition elements, enzyme-substrates, and cell-penetrating elements. Applications of CPs and peptides in fluorescent imaging and Raman imaging in living cells are subsequently reviewed.

Fluorescent glycoconjugates and their applications

Fluorescent glycoconjugates are discussed for their applications in biology in vitro, in cell assays and in animal models. Advantages and limitations are presented for each design using a fluorescent core conjugated with glycosides, or vice versa.

Synthesis and photophysical properties of water-soluble fluorinated poly(aryleneethynylene)s

Reported are the synthesis of water-soluble fluorinated conjugated polymers, and photophysical properties, and fluorescence quenching response to arylamines.

Synthesis and photophysical properties of conjugated (dodecyl)benzoateethynylene macromolecules: staining ofBacillus subtilisandEscherichia colirhizobacteria

The staining of agrobacteria was successfully demonstrated through a benzoateethynylene by fluorescence spectroscopy, laser confocal microscopy and microRaman.

A Simple Mannose-Coated Poly (p-Phenylene Ethynylene) for Qualitative Bacterial Capturing

A mannose-functionalized poly (p-phenylene ethynylene) was rationally designed to achieve selective detection of bacteria. The polymer was constructed as a signaling unit and was modified by attaching aminoethyl mannose using the carboxylic acid group at the end of the linker. Incubation of Escherichia coli with the polymer yielded fluorescent bacteria aggregates through polyvalent interactions. The utility of the mannose functionalized polymer to detect E. coli expressing functional FimH mannose-specific lectin on their surface was also demonstrated. The sugar units displayed on the surface of the polymer retained their functional ability to interact with mannose-binding lectin. To determine the optimum binding time, we measured the fluorescence intensity of the polymer-bacteria suspension at intervals. Our results showed that binding in this system will reach an optimum level within 30 min of incubation. The polymer’s affinity for bacteria has been demonstrated and bacteria with a concentration of 10³ CFU mL⁻¹ can be detected by this system.

Tetraphenylethylene-based glycoclusters with aggregation-induced emission (AIE) properties as high-affinity ligands of bacterial lectins

TPE-based glycoclusters are fluorescent through aggregation induced emission (AIE) in water.

Intercalation of Alkynylplatinum(II) Terpyridine Complexes into a Helical Poly(phenylene ethynylene) Sulfonate: Application to Protein Sensing

The interactions of two anionic poly(phenylene ethynylene) sulfonate-conjugated polyelectrolytes (mPPESO₃^- and pPPESO₃^-) with two alkynylplatinum(II) terpyridine complexes (Pt²⁺ and Pt³⁺) were studied. The Pt(II) complexes interact with helical mPPESO₃^- by intercalation within the polymer helix to form a "guest-host" ensemble. Titration of Pt(II) complexes into an aqueous solution of mPPESO₃^- gives rise to efficient quenching of the polymer's fluorescence; meanwhile, triplet metal-metal-to-ligand charge transfer (³MMLCT) state emission from the intercalated Pt(II) complexes appears when the ensembles are excited into the polymer's absorption band. The ³MMLCT state emission implies that the Pt(II) complexes aggregate or dimerize on the mPPESO₃^- scaffold. The responses of the mPPESO₃^- and Pt(II) complex ensembles to various proteins were examined by monitoring the mPPESO₃^- fluorescence change. Negatively charged proteins recover the mPPESO₃^- fluorescence more than the positively charged proteins under physiological pH, indicating that electrostatics play an important role in the protein-ensemble interaction.

End Functionalized Nonionic Water-Dispersible Conjugated Polymers

2,7-Dibromofluorene monomers carrying two or four oligo(ethylene glycol) (OEG) side chains are synthesized. Heck coupling between the monomers and 1,4-divinylbenzene followed by end capping with [4-(4-bromophenoxy)butyl]carbamic acid tert-butyl ester leads to two nonionic water-dispersible poly(fluorene-alt-1,4-divinylenephenylene)s end-functionalized with amine groups after hydrolysis. In water, the polymer with a lower OEG density (P1) has poor water dispersibility with a quantum yield of 0.24, while the polymer with a higher OEG density (P2) possesses excellent water-dispersibility with a high quantum yield of 0.45. Both polymers show fluorescence enhancement and blue-shifted absorption and emission maxima in the presence of surfactant sodium dodecyl sulfate and dodecyltrimethylammonium bromide. The polymers are also resistant to ionic strength with minimal nonspecific interactions to bovine serum albumin. When biotin is incorporated into the end of the polymer backbones through N-hydroxysuccinimide/amine coupling reaction, the biotinylated polymers interact specifically with streptavidin on solid surface.

Supramolecular Recognition of Escherichia coli Bacteria by Fluorescent Oligo(Phenyleneethynylene)s with Mannopyranoside Termini Groups

Escherichia coli is one the most common bacteria responsible of uropathogenic diseases, which motives the search for rapid and easy methods of detection. By taking advantage of the specific interactions between mannose and type 1 fimbriae, in this work two fluorescent phenyleneethynylene (PE) trimers bearing one or two 4-aminophenyl-α-D-mannopyranoside termini groups were synthesized for the detection of E. coli. Three bacterial strains: ORN 178 (fimbriae I expression), ORN 208 (mutant serotype with no fimbriae expression) and one obtained from a local hospital (SS3) were used. Laser Scanning Confocal Microscopy (LSCM) and Surface Plasmon Resonance (SPR) were applied for the interaction studies following two different approaches: (1) mixing the oligomer solutions with the bacterial suspension, which permitted the observation of stained bacteria and by (2) biosensing as thin films, where bacteria adhered on the surface-functionalized substrate. LSCM allows one to easily visualize that two mannose groups are necessary to have a specific interaction with the fimbriae 1. The sensitivity of SPR assays to E. coli was 10⁴ colony forming unit (CFU)/mL at 50 µL/min flow rate. The combination of PE units with two mannose groups results in a novel molecule that can be used as a specific fluorescent marker as well as a transducer for the detection of E. coli.

Perylenediimide-based glycoclusters as high affinity ligands of bacterial lectins: synthesis, binding studies and anti-adhesive properties

Rapid access to perylenediimide-based glycoclusters allowed their evaluation as high affinity ligands of bacterial lectins and their potential as anti-adhesive antibacterials.

Synthesis and bioconjugation of first alkynylated poly(dithieno[3,2-b:2′,3′-d]pyrrole)s

First synthesis of alkynylated poly(dithieno[3,2-b:2′,3′-d]pyrroles) is reported for the fabrication of compositionally tuneable electrodes.

A polymer electron donor based on isoindigo units bearing branched oligo(ethylene glycol) side chains for polymer solar cells

The oligo(ethylene glycol) side chains make the polymer donor exhibit good compatibility with PC₇₁BM and consequently show good photovoltaic performance.

Visualization of Sweat Fingerprints on Various Surfaces Using a Conjugated Polyelectrolyte

A conformation-variable conjugated polyelectrolyte responding to oppositely charged biomolecules was examined as an imaging agent for the detection of latent fingerprints (LFPs). Sulfonated poly(diphenylacetylene) (SPDPA) produces high-resolution fluorescence (FL) LFP images by simple wetting of the target objects with the polymer solution without any additional treatment. SPDPA readily interacts with LFP sweat components (especially amino acids) via electrostatic interactions, leading to significantly enhanced FL images in a "turn-on" mode. The FL emission enhancement was examined in a model reaction between SPDPA and an amino acid standard. Visualization with SPDPA is effective on various surfaces, including both rough (paper) and smooth (glass and plastic) ones. Moreover, SPDPA readily interacts with extremely thin sweat LFPs, especially on smooth glass surfaces.

Supramolecular Ensembles Formed between Charged Conjugated Polymers and Glycoprobes for the Fluorogenic Recognition of Receptor Proteins

This paper describes the simple construction of a unique class of supramolecular ensembles formed by electrostatic self-assembly between charged conjugated polymers and fluorophore-coupled glycoligands (glycoprobes) for the selective fluorogenic detection of receptor proteins at both the molecular and cellular levels. We show that positively and negatively charged diazobenzene-containing poly(p-phenylethynylenes) (PPEs) can be used to form stable fluorogenic probes with fluorescein-based (negatively charged) and rhodamine B based (positively charged) glycoprobes by electrostatic interaction. The structures of the ensembles have been characterized by spectroscopic and microscopic techniques. The supramolecular probes formed show quenched fluorescence in an aqueous buffer solution, which can be specifically recovered, in a concentration-dependent manner, through competitive complexation with a selective protein receptor, over a range of other unselective proteins. The ensembles also show selective fluorescence enhancement with a live cell that expresses the glycoligand receptor but not a control cell without receptor expression.

Synthesis of 3-stannyl and 3-silyl propargyl phosphanes and the formation of a phosphinoallene

The group 14 chloropropargyls R3EC ≡ CCH2Cl (R3E = (n)Bu3Sn, Ph3Sn, Me2PhSi, (i)Pr3Si, (n)Pr3Si, (n)Bu3Si), obtained by a modified literature procedure, react with LiPPh2 to afford the novel propargyl phosphanes Ph2PCH2C ≡ CER3 in high yield, as viscous oils; (Me3Si)2PCH2C ≡ CSiPhMe2 is similarly obtained from LiP(SiMe3)2. In contrast, the reaction of PhC[triple bond, length as m-dash]CCH2MgCl with ClP(NEt2)2 fails to produce a comparable propargyl phosphane, but generates preferentially (>70%) the novel phosphinoallene (Et2N)2PC(Ph) = C = CH2, which is characterised spectroscopically, and through its reaction with HCl. The coordination chemistry of representative phosphanes is explored with respect to platinum and palladium for the first time.

Cu-Catalyzed Click Reaction in Carbohydrate Chemistry

Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC), popularly known as the "click reaction", serves as the most potent and highly dependable tool for facile construction of simple to complex architectures at the molecular level. Click-knitted threads of two exclusively different molecular entities have created some really interesting structures for more than 15 years with a broad spectrum of applicability, including in the fascinating fields of synthetic chemistry, medicinal science, biochemistry, pharmacology, material science, and catalysis. The unique properties of the carbohydrate moiety and the advantages of highly chemo- and regioselective click chemistry, such as mild reaction conditions, efficient performance with a wide range of solvents, and compatibility with different functionalities, together produce miraculous neoglycoconjugates and neoglycopolymers with various synthetic, biological, and pharmaceutical applications. In this review we highlight the successful advancement of Cu(I)-catalyzed click chemistry in glycoscience and its applications as well as future scope in different streams of applied sciences.

Preparation of Conjugated Polymer Grafted with H2O2-Sensitive Prodrug for Cell Imaging and Tumor Cell Killing

In this work, a new conjugated polymer poly(fluorene-co-phenylene) derivative containing pendent quaternized chlormethine (PFP-Chl) was synthesized by covalent linking small molecular prodrug groups onto conjugated polymer side chains. H2O2-sensitive prodrug with an eight-member-cyclic boronate ester structure could suffer from H2O2-triggered nitrogen mustard release and further DNA cross-linking and alkylation. PFP-Chl combines therapeutic characteristic with excellent optical property of conjugated polymers. It is found that PFP-Chl could enter into cells by endocytosis to simultaneously exhibit abilities of fluorescent imaging and tumor cell inhibition.

Interlocked supramolecular glycoconjugated polymers for receptor-targeting theranostics

We report an interlocked supramolecular ensemble formed between a conjugated polymer (CP) and a fluorescent glycoprobe for receptor-targeting cancer cell theranostics.

Self-assembling oligothiophene–bolaamphiphiles for loading and controlled release of doxorubicin into living cells

Symmetric mannose-functionalized oligothiophenes for efficient transport and release of the anti-tumour drug doxorubicin.

Carbohydrates in Supramolecular Chemistry

Carbohydrates are involved in a variety of biological processes. The ability of sugars to form a large number of hydrogen bonds has made them important components for supramolecular chemistry. We discuss recent advances in the use of carbohydrates in supramolecular chemistry and reveal that carbohydrates are useful building blocks for the stabilization of complex architectures. Systems are presented according to the scaffold that supports the glyco-conjugate: organic macrocycles, dendrimers, nanomaterials, and polymers are considered. Glyco-conjugates can form host-guest complexes, and can self-assemble by using carbohydrate-carbohydrate interactions and other weak interactions such as π-π interactions. Finally, complex supramolecular architectures based on carbohydrate-protein interactions are discussed.

Pyridine-based poly(aryleneethynylene)s: a study on anionic side chain density and their influence on optical properties and metallochromicity

We report the Pd-catalyzed synthesis of six new water soluble, alternating poly(p-phenylene-ethynylene-p-pyridinylene-ethynylene) (abcb-alternating) copolymers and one poly(p-pyridinyleneethynylene).

Synthesis of a multifunctional poly(p-phenylene ethynylene) scaffold with clickable azide-containing side chains for (bio)sensor applications

Clickable poly(p-phenylene ethynylene) (PPE) copolymers were designed and synthesized towards (bio)sensor applications.

Chiral, fluorescent microparticles constructed by optically active helical substituted polyacetylene: preparation and enantioselective recognition ability

Novel chiral fluorescent microparticles derived from helical substituted polyacetylene were prepared. The microparticles showed enantioselective recognition ability in both heterogeneous and homogeneous systems.

Monodispersed nanoparticles of conjugated polyelectrolyte brush with high charge density for rapid, specific and label-free detection of tumor marker

Rapid and label-free detection of human α-fetoprotein (AFP) based on selective superquenching of monodispersed nanoparticles of conjugated polyelectrolyte.

"Yin and Yang" tuned fluorescence sensing behavior of branched 1,4-bis(phenylethynyl)benzene

Achieving high sensing performance and good photostability of fluorescent films based on adlayer construction represents a significant challenge in the area of functional fluorescent film research. A solution may be offered by "Yin and Yang", a balance idea from Chinese philosophy, for the design of a fluorophore and the relevant assembly. Accordingly, a 1,4-bis(phenylethynyl)benzene (BPEB) derivative (C2) with two cholesteryl residues in the side chains and two glucono units in the head and tail positions was designed and synthesized. As a control, compound C1 was also prepared. The only difference between C1 and C2 is that the hydroxyl groups in the glucono residues of C1 are fully acetylated. Studies of the fluorescence behaviors of the two compounds in solution revealed that both the profile and the intensity of the fluorescence emission of the compounds, in particular C2, are dependent on their concentration and on the nature of solvents employed. Presence of HCl also alters the emission of the compounds in solution. On the basis of the studies, three fluorescent films were prepared, and their sensing performances to HCl in vapor state were studied. Specifically, Film 1 and Film 3 were fabricated via physical coating, separately, of C2 and C1 on glass plate surfaces. As another comparison, Film 2 was also fabricated with C2 as a fluorophore but at a much lower concentration if compared to that for the preparation of Film 1. As revealed by SEM and fluorescent microscopy studies, Film 1 and Film 2 exhibit well-defined microstructures, which are spherical particles and spherical pores, respectively, while Film 3 is characterized by irregular aggregates of C1. Fluorescence measurements demonstrated that Film 1 and Film 3 both display an aggregation emission, of which the emission from Film 1 is supersensitive to the presence of HCl vapor (detection limit: 0.4 ppb, a lowest value reported in the literatures). For Film 3, however, its emission is insensitive to the presence of the vapor. Similarly, the emission from the nonaggregated state of C2, a characteristic emission of Film 2, is also insensitive to the presence of the vapor. Furthermore, the sensing process of Film 1 to the vapor is highly selective and fully reversible, which lays foundation for its real-life uses. As for C2, the results from solution studies and those from film studies demonstrate clearly that introduction of auxiliary structures with opposite properties onto a typical fluorophore is a good strategy to develop fluorescent supramolecular motifs with rich assembly properties and great potential of applications.

Detection of amines with extended distyrylbenzenes by strip assays

We herein describe the synthesis and property evaluation of three novel aldehyde-substituted pentameric phenylenevinylenes carrying branched oligo(ethylene glycol) (swallowtail, Sw) substituents. The targets were synthesized by a combination of Heck coupling and Wittig or Horner reactions of suitable precursor modules. If the pentameric phenylenevinylene carries only two of these Sw substituents, it is no longer water-soluble. When six of the Sw substituents are attached, regardless of their position, the pentameric phenylenevinylenes are well water-soluble. The dialdehydes were investigated with respect to their amine-sensing capabilities both in water as well as in the solid state, sprayed onto thin layer chromatography (TLC) plates (alox, silica gel, reversed phase silica gel). The recognition of amine vapors using the sprayed-on phenylenevinylene dialdehydes is superb and allows the identification of different amines on regular silica TLC plates via color changes, analyzed by a statistical tool, the multivariate analysis of variance (MANOVA) protocol.

Glycan-functionalized fluorescent chitin nanocrystals for biorecognition applications

A new platform based on chitin nanocrystals has been developed for biorecognition applications. TEMPO-oxidized chitin nanocrystals (TCNs) were labeled with a fluorescent imidazoisoquinolinone dye, and simultaneously conjugated with carbohydrate ligands, resulting in dually functionalized TCNs. The biorecognition properties of the nanocrystals were probed with lectins and bacteria, resulting in selective interactions with their corresponding cognate carbohydrate-binding proteins, as visualized by optical, fluorescence, STEM, and TEM imaging. This represents a new approach to multifunctional nanomaterials based on naturally occurring polymers, holding high potential for biomedical applications.

Self-organizing carbohydrate-oligothiophene-hybrids for eukaryotic membrane-labelling

Self-assembling d-(+) and l-(−) mannose-functionalized oligothiophene hybrids were synthesized via Sonogashira cross-coupling reaction. The hybrids are taken up into live myeloid cells and offer an ideal platform for imaging of artificial and cellular membranes.

A facile strategy toward conjugated polyelectrolyte with oligopeptide as pendants for biological applications

We report a facile yet efficient strategy to synthesize biofunctionalized conjugated polyelectrolyte using click reaction between an amphiphilic oligopeptide (R10) and organic soluble polyfluorene (PF) as an example. PF-R10 shows the absorption and emission maxima at ~380 and ~430 nm in water, respectively. In addition, it exhibits enhanced fluorescence in acidic circumstance as compared to that in neutral environment because of reduced aggregation, which is confirmed by laser light scattering and atomic force microscopy studies. In view of the penetration property of the grafted R10 peptide, PF-R10 shows excellent cell uptake and labeling ability in cellular imaging.