Structural transitions in ion coordination driven by changes in competition for ligand binding

Insight into the K channel's selectivity from binding of K+, Na+ and water to N-methylacetamide

In potassium channels that conduct K+ selectively over Na+, which sites are occupied by K+ or water and the mechanism of selectivity are unresolved questions. The combination of the energetics and the constraints imposed by the protein structure yield the selective permeation and occupancy. To gain insight into the combination of structure and energetics, we performed density functional theory (DFT) calculations of multiple N-methyl acetamide (NMA) ligands binding to K+ and Na+, relative to hydrated K+ and Na+. NMA is an analogue of the amino acid backbone and provides the carbonyl binding to the ions that occurs in most binding sites of the K+ channel. Unconstrained optimal structures are obtained through geometry optimization calculations of the NMA ligand binding. The complexes formed by 8 NMA binding to the cations have the O atoms positioned in nearly identical locations as the O atoms in the selectivity filter. The transfer free energies between bulk water and K+ or Na+ bound to 8 NMA are almost identical, implying there is no selectivity by a single site. For water optimized with 8 NMA, binding is weak and O atoms are not positioned as in the K+ channel selectivity filter, suggesting that the ions are much more favored than water. Optimal structures of 8 NMA binding with two cations (K+ or Na+) are stable and have lower binding free energy than the optimal structures with just one cation. However, in the Na+ case, the optimal structure deforms and does not match the K+ channel; that is, two bound Na+ are destabilizing. In contrast, the two K+ structure is stabilized and the selectivity free energy favors K+. Overall, this study shows that binding site occupancy and the mechanism for K+ selectivity involves multiple K+ binding in multiple neighboring layers or sites of the K+ channel selectivity filter.

Polarizable AMOEBA Model for Simulating Mg2+·Protein·Nucleotide Complexes

Molecular mechanics (MM) simulations have the potential to provide detailed insights into the mechanisms of enzymes that utilize nucleotides as cofactors. In most cases, the activities of these enzymes also require the binding of divalent cations to catalytic sites. However, modeling divalent cations in MM simulations has been challenging. The inclusion of explicit polarization was considered promising, but despite improvements over nonpolarizable force fields and despite the inclusion of "Nonbonded-fix (NB-fix)" corrections, errors in interaction energies of divalent cations with proteins remain large. Importantly, the application of these models fails to reproduce the experimental structural data on Mg2+·Protein·ATP complexes. Focusing on these complexes, here we provide a systematic assessment of the polarizable AMOEBA model and recommend critical changes that substantially improve its predictive performance. Our key results are as follows. We first show that our recent revision of the AMOEBA protein model (AMOEBABIO18-HFC), which contains high field corrections (HFCs) to induced dipoles, dramatically improves Mg2+-protein interaction energies, reducing the mean absolute error (MAE) from 17 to 10 kcal/mol. This further supports the general applicability of AMOEBABIO18-HFC. The inclusion of many-body NB-fix corrections further reduces MAE to 6 kcal/mol, which amounts to less than 2% error. The errors are estimated with respect to vdW-inclusive density functional theory that we benchmark against CCSD(T) calculations and experiments. We also present a new model of ATP with revised polarization parameters to better capture its high field response, as well as new vdW and dihedral parameters. The ATP model accurately predicts experimental Mg2+-ATP binding free energy in the aqueous phase and provides new insights into how Mg2+ associates with ATP. Finally, we show that molecular dynamics (MD) simulations of Mg2+·Kinase·ATP complexes carried out with these improvements lead to a better agreement in global and local catalytic site structures between MD and X-ray crystallography.

Binding of carboxylate and water to monovalent cations

The interactions of carboxylate anions with water and cations are important for a wide variety of systems, both biological and synthetic. To gain insight on properties of the local complexes, we apply density functional theory, to treat the complex electrostatic interactions, and investigate mixtures with varied numbers of carboxylate anions (acetate) and waters binding to monovalent cations, Li+, Na+ and K+. The optimal structure with overall lowest free energy contains two acetates and two waters such that the cation is four-fold coordinated, similar to structures found earlier for pure water or pure carboxylate ligands. More generally, the complexes with two acetates have the lowest free energy. In transitioning from the overall optimal state, exchanging an acetate for water has a lower free energy barrier than exchanging water for an acetate. In most cases, the carboxylates are monodentate and in the first solvation shell. As water is added to the system, hydrogen bonding between waters and carboxylate O atoms further stabilizes monodentate structures. These structures, which have strong electrostatic interactions that involve hydrogen bonds of varying strength, are significantly polarized, with ChelpG partial charges that vary substantially as the bonding geometry varies. Overall, these results emphasize the increasing importance of water as a component of binding sites as the number of ligands increases, thus affecting the preferential solvation of specific metal ions and clarifying Hofmeister effects. Finally, structural analysis correlated with free energy analysis supports the idea that binding to more than the preferred number of carboxylates under architectural constraints are a key to ion transport.

Inclusion of High-Field Target Data in AMOEBA's Calibration Improves Predictions of Protein-Ion Interactions

The reliability of molecular mechanics simulations to predict effects of ion binding to proteins depends on their ability to simultaneously describe ion-protein, ion-water, and protein-water interactions. Force fields (FFs) to describe protein-water and ion-water interactions have been constructed carefully and have also been refined routinely to improve accuracy. Descriptions for ion-protein interactions have also been refined, although in an a posteriori manner through the use of "nonbonded-fix (NB-fix)" approaches in which parameters from default Lennard-Jones mixing rules are replaced with those optimized against some reference data. However, even after NB-fix corrections, there remains a significant need for improvement. This is also true for polarizable FFs that include self-consistent inducible moments. Our recent studies on the polarizable AMOEBA FF suggested that the problem associated with modeling ion-protein interactions could be alleviated by recalibrating polarization models of cation-coordinating functional groups so that they respond better to the high electric fields present near ions. Here, we present such a recalibration of carbonyls, carboxylates, and hydroxyls in the AMOEBA protein FF and report that it does improve predictions substantially─mean absolute errors in Na⁺-protein and K⁺-protein interaction energies decrease from 8.7 to 5.3 and 9.6 to 6.3 kcal/mol, respectively. Errors are computed with respect to estimates from van der Waals-inclusive density functional theory benchmarked against high-level quantum mechanical calculations and experiments. While recalibration does improve ion-protein interaction energies, they still remain underestimated, suggesting that further improvements can be made in a systematic manner through modifications in classical formalism. Nevertheless, we show that by applying our many-body NB-fix correction to Lennard-Jones components, these errors are further reduced to 2.7 and 2.6 kcal/mol, respectively, for Na⁺ and K⁺ ions. Finally, we show that the recalibrated AMOEBA protein FF retains its intrinsic reliability in predicting protein structure and dynamics in the condensed phase.

Hydrated Anions: From Clusters to Bulk Solution with Quasi-Chemical Theory

The interactions of hydrated ions with molecular and macromolecular solution and interface partners are strong on a chemical energy scale. Here, we recount the foremost ab initio theory for the evaluation of the hydration free energies of ions, namely, quasi-chemical theory (QCT). We focus on anions, particularly halides but also the hydroxide anion, because they have been outstanding challenges for all theories. For example, this work supports understanding the high selectivity for F^- over Cl^- in fluoride-selective ion channels despite the identical charge and the size similarity of these ions. QCT is built by the identification of inner-shell clusters, separate treatment of those clusters, and then the integration of those results into the broader-scale solution environment. Recent work has focused on a close comparison with mass-spectrometric measurements of ion-hydration equilibria. We delineate how ab initio molecular dynamics (AIMD) calculations on ion-hydration clusters, elementary statistical thermodynamics, and electronic structure calculations on cluster structures sampled from the AIMD calculations obtain just the free energies extracted from the cluster experiments. That theory-experiment comparison has not been attempted before the work discussed here, but the agreement is excellent with moderate computational effort. This agreement reinforces both theory and experiment and provides a numerically accurate inner-shell contribution to QCT. The inner-shell complexes involving heavier halides display strikingly asymmetric hydration clusters. Asymmetric hydration structures can be problematic for the evaluation of the QCT outer-shell contribution with the polarizable continuum model (PCM). Nevertheless, QCT provides a favorable setting for the exploitation of PCM when the inner-shell material shields the ion from the outer solution environment. For the more asymmetrically hydrated, and thus less effectively shielded, heavier halide ions clustered with waters, the PCM is less satisfactory. We therefore investigate an inverse procedure in which the inner-shell structures are sampled from readily available AIMD calculations on the bulk solutions. This inverse procedure is a remarkable improvement; our final results are in close agreement with a standard tabulation of hydration free energies, and the final composite results are independent of the coordination number on the chemical energy scale of relevance, as they should be. Finally, a comparison of anion hydration structure in clusters and bulk solutions from AIMD simulations emphasize some differences: the asymmetries of bulk solution inner-shell structures are moderated compared with clusters but are still present, and inner hydration shells fill to slightly higher average coordination numbers in bulk solution than in clusters.

High-Dimensional Parameter Search Method to Determine Force Field Mixing Terms in Molecular Simulations

Molecular dynamics (MD) force fields for lipids and ions are typically developed independently of one another. In simulations consisting of both lipids and ions, lipid-ion interaction energies are estimated using a predefined set of mixing rules for Lennard-Jones (LJ) interactions. This, however, does not guarantee their reliability. In fact, compared to the quantum mechanical reference data, Lorentz-Berthelot mixing rules substantially underestimate the binding energies of Na⁺ ions with small-molecule analogues of lipid headgroups, yielding errors on the order of 80 and 130 kJ/mol, respectively, for methyl acetate and diethyl phosphate. Previously, errors associated with mixing force fields have been reduced using approaches such as "NB-fix" in which LJ interactions are computed using explicit cross terms rather than those from mixing rules. Building on this idea, we derive explicit lipid-ion cross terms that also may implicitly include many-body cooperativity effects. Additionally, to account for the interdependency between cross terms, we optimize all cross terms simultaneously by performing high-dimensional searches using our ParOpt software. The cross terms we obtain reduce the errors due to mixing rules to below 10 kJ/mol. MD simulation of the lipid bilayer conducted using these optimized cross terms resolves the structural discrepancies between our previous simulations and small-angle X-ray and neutron scattering experiments. These results demonstrate that simulations of lipid bilayers with ions that are accurate up to structural data from scattering experiments can be performed without explicit polarization terms. However, it is worth noting that such NB-fix cross terms are not based on any physical principle; a polarizable lipid model would be more realistic and is still desired. Our approach is generic and can be applied to improve the accuracies of simulations employing mixed force fields.

Thermodynamics of ion binding and occupancy in potassium channels

Potassium channels modulate various cellular functions through efficient and selective conduction of K⁺ ions. The mechanism of ion conduction in potassium channels has recently emerged as a topic of debate. Crystal structures of potassium channels show four K⁺ ions bound to adjacent binding sites in the selectivity filter, while chemical intuition and molecular modeling suggest that the direct ion contacts are unstable. Molecular dynamics (MD) simulations have been instrumental in the study of conduction and gating mechanisms of ion channels. Based on MD simulations, two hypotheses have been proposed, in which the four-ion configuration is an artifact due to either averaged structures or low temperature in crystallographic experiments. The two hypotheses have been supported or challenged by different experiments. Here, MD simulations with polarizable force fields validated by ab initio calculations were used to investigate the ion binding thermodynamics. Contrary to previous beliefs, the four-ion configuration was predicted to be thermodynamically stable after accounting for the complex electrostatic interactions and dielectric screening. Polarization plays a critical role in the thermodynamic stabilities. As a result, the ion conduction likely operates through a simple single-vacancy and water-free mechanism. The simulations explained crystal structures, ion binding experiments and recent controversial mutagenesis experiments. This work provides a clear view of the mechanism underlying the efficient ion conduction and demonstrates the importance of polarization in ion channel simulations.

Polarization shapes the energy landscape of ion conduction in potassium channels.

Absolute ion hydration free energy scale and the surface potential of water via quantum simulation

With a goal of determining an absolute free energy scale for ion hydration, quasi-chemical theory and ab initio quantum mechanical simulations are employed to obtain an accurate value for the bulk hydration free energy of the Na⁺ ion. The free energy is partitioned into three parts: 1) the inner-shell or chemical contribution that includes direct interactions of the ion with nearby waters, 2) the packing free energy that is the work to produce a cavity of size λ in water, and 3) the long-range contribution that involves all interactions outside the inner shell. The interfacial potential contribution to the free energy resides in the long-range term. By averaging cation and anion data for that contribution, cumulant terms of all odd orders in the electrostatic potential are removed. The computed total is then the bulk hydration free energy. Comparison with the experimentally derived real hydration free energy produces an effective surface potential of water in the range -0.4 to -0.5 V. The result is consistent with a variety of experiments concerning acid-base chemistry, ion distributions near hydrophobic interfaces, and electric fields near the surface of water droplets.

Transferable interactions of Li+ and Mg2+ ions in polarizable models

Therapeutic implications of Li⁺, in many cases, stem from its ability to inhibit certain Mg²⁺-dependent enzymes, where it interacts with or substitutes for Mg²⁺. The underlying details of its action are, however, unknown. Molecular simulations can provide insights, but their reliability depends on how well they describe relative interactions of Li⁺ and Mg²⁺ with water and other biochemical groups. Here, we explore, benchmark, and recommend improvements to two simulation approaches: the one that employs an all-atom polarizable molecular mechanics (MM) model and the other that uses a hybrid quantum and MM implementation of the quasi-chemical theory (QCT). The strength of the former is that it describes thermal motions explicitly and that of the latter is that it derives local contributions from electron densities. Reference data are taken from the experiment, and also obtained systematically from CCSD(T) theory, followed by a benchmarked vdW-inclusive density functional theory. We find that the QCT model predicts relative hydration energies and structures in agreement with the experiment and without the need for additional parameterization. This implies that accurate descriptions of local interactions are essential. Consistent with this observation, recalibration of local interactions in the MM model, which reduces errors from 10.0 kcal/mol to 1.4 kcal/mol, also fixes aqueous phase properties. Finally, we show that ion-ligand transferability errors in the MM model can be reduced significantly from 10.3 kcal/mol to 1.2 kcal/mol by correcting the ligand's polarization term and by introducing Lennard-Jones cross-terms. In general, this work sets up systematic approaches to evaluate and improve molecular models of ions binding to proteins.

Improved description of ligand polarization enhances transferability of ion-ligand interactions

The reliability of molecular mechanics (MM) simulations in describing biomolecular ion-driven processes depends on their ability to accurately model interactions of ions simultaneously with water and other biochemical groups. In these models, ion descriptors are calibrated against reference data on ion-water interactions, and it is then assumed that these descriptors will also satisfactorily describe interactions of ions with other biochemical ligands. The comparison against the experiment and high-level quantum mechanical data show that this transferability assumption can break down severely. One approach to improve transferability is to assign cross terms or separate sets of non-bonded descriptors for every distinct pair of ion type and its coordinating ligand. Here, we propose an alternative solution that targets an error-source directly and corrects misrepresented physics. In standard model development, ligand descriptors are never calibrated or benchmarked in the high electric fields present near ions. We demonstrate for a representative MM model that when the polarization descriptors of its ligands are improved to respond to both low and high fields, ligand interactions with ions also improve, and transferability errors reduce substantially. In our case, the overall transferability error reduces from 3.3 kcal/mol to 1.8 kcal/mol. These improvements are observed without compromising on the accuracy of low-field interactions of ligands in gas and condensed phases. Reference data for calibration and performance evaluation are taken from the experiment and also obtained systematically from "gold-standard" CCSD(T) in the complete basis set limit, followed by benchmarked vdW-inclusive density functional theory.

Lennard-Jones Parameters Determined to Reproduce the Solubility of NaCl and KCl in SPC/E, TIP3P, and TIP4P/2005 Water

Most classical nonpolarizable ion potential models underestimate the solubility values of NaCl and KCl in water significantly. We determine Lennard-Jones parameters of Na⁺, K⁺, and Cl^- that reproduce the solubility as well as the hydration free energy in dilute aqueous solutions for three water potential models, SPC/E, TIP3P, and TIP4P/2005. The ion-oxygen distance in the solution and the cation-anion distance in salt are also considered in the parametrization. In addition to the target properties, the hydration enthalpy, hydration entropy, self-diffusion coefficient, coordination number, lattice energy, enthalpy of solution, density, viscosity, and number of contact ion pairs are calculated for comparison with 17 frequently used or recently developed ion potential models. The overall performance of each ion model is represented by a global score using a scheme that was originally developed for comparison of water potential models. The global score is better for our models than for the other 17 models not only because of the quite good prediction for the solubility but also because of the relatively small deviation from the experimental value for many of the other properties.

Machine Learning-Guided Approach for Studying Solvation Environments

Molecular-level understanding and characterization of solvation environments are often needed across chemistry, biology, and engineering. Toward practical modeling of local solvation effects of any solute in any solvent, we report a static and all-quantum mechanics-based cluster-continuum approach for calculating single-ion solvation free energies. This approach uses a global optimization procedure to identify low-energy molecular clusters with different numbers of explicit solvent molecules and then employs the smooth overlap for atomic positions learning kernel to quantify the similarity between different low-energy solute environments. From these data, we use sketch maps, a nonlinear dimensionality reduction algorithm, to obtain a two-dimensional visual representation of the similarity between solute environments in differently sized microsolvated clusters. After testing this approach on different ions having charges 2+, 1+, 1-, and 2-, we find that the solvation environment around each ion can be seen to usually become more similar in hand with its calculated single-ion solvation free energy. Without needing either dynamics simulations or an a priori knowledge of local solvation structure of the ions, this approach can be used to calculate solvation free energies within 5% of experimental measurements for most cases, and it should be transferable for the study of other systems where dynamics simulations are not easily carried out.

Interactions of Monovalent and Divalent Cations at Palmitoyl-Oleoyl-Phosphatidylcholine Interface

Li⁺ is a biologically active and medically important cation. Experiments show that Li⁺ modulates some phospholipid bilayer properties in a manner similar to divalent cations, rather than other monovalent cations. We previously performed a comparative simulation study of the interaction of several monovalent cations with palmitoyl-oleoyl-phosphatidylcholine bilayers and reported that Li⁺ exhibited the highest association with lipids and formed a unique tetrahedral coordinated structure with lipid head groups. Here we extend these studies to two biologically important divalent cations, Mg²⁺ and Ca²⁺, and observe that, just like monovalent cations, Mg²⁺ and Ca²⁺ reduce bilayer areas and increase chain order. Bilayer area changes induced by cations are strongly correlated with the amount of charge inside the headgroup region; however, Mg²⁺ and Li⁺ are clear outliers. At the same time though, Mg²⁺ adsorption in the bilayer is the smallest among all cations, which is in contrast to Li⁺ that binds strongly to lipids. In fact, in contrast to all other cations, Mg²⁺ remains fully hydrated in the lipid headgroup region. However, Li⁺ and Mg²⁺ share high overlap between their inner-shell coordination topologies. This suggests that Li⁺ can structurally replace Mg²⁺, which is bound to other biomolecules with up to fourfold coordination, provided such replacement is energetically feasible. We compute structural topologies and compare them quantitatively using a new weighted-graphs-based method. Finally, we find that the specificity of cation interaction with lipid head groups exhibit consistent trend with the solvation shell energetics of ions in lipid headgroup and bulk water regions.

Interaction of salt with ether- and ester-linked phospholipid bilayers

A distinguishing feature of Archaeal plasma membranes is that their phospholipids contain ether-links, as opposed to bacterial and eukaryotic plasma membranes where phospholipids primarily contain ester-links. Experiments show that this chemical difference in headgroup-tail linkage does produce distinct differences in model bilayer properties. Here we examine the effects of salt on bilayer structure in the case of an ether-linked lipid bilayer. We use molecular dynamics simulations and compare equilibrium properties of two model lipid bilayers in NaCl salt solution - POPC and its ether-linked analog that we refer to as HOPC. We make the following key observations. The headgroup region of HOPC "adsorbs" fewer ions compared to the headgroup region of POPC. Consistent with this, we note that the Debye screening length in the HOPC system is ∼ 10% shorter than that in the POPC system. Herein, we introduce a protocol to identify the lipid-water interfacial boundary that reproduces the bulk salt distribution consistent with Gouy-Chapman theory. We also note that the HOPC bilayer has excess solvent in the headgroup region when compared to POPC, coinciding with a trough in the electrostatic potential. Waters in this region have longer autocorrelation times and smaller lateral diffusion rates compared to the corresponding region in the POPC bilayer, suggesting that the waters in HOPC are more strongly coordinated to the lipid headgroups. Furthermore, we note that it is this region of tightly coordinated waters in the HOPC system that has a lower density of Na⁺ ions. Based on these observations we conclude that an ether-linked lipid bilayer has a lower binding affinity for Na⁺ compared to an ester-linked lipid bilayer.

Ion-Hydroxyl Interactions: From High-Level Quantum Benchmarks to Transferable Polarizable Force Fields

Ion descriptors in molecular mechanics models are calibrated against reference data on ion-water interactions. It is then typically assumed that these descriptors will also satisfactorily describe interactions of ions with other functional groups, such as those present in biomolecules. However, several studies now demonstrate that this transferability assumption produces, in many different cases, large errors. Here we address this issue in a representative polarizable model and focus on transferability of cationic interactions from water to a series of alcohols. Both water and alcohols use hydroxyls for ion-coordination, and, therefore, this set of molecules constitutes the simplest possible case of transferability. We obtain gas phase reference data systematically from "gold-standard" quantum Monte Carlo and CCSD(T) methods, followed by benchmarked vdW-corrected DFT. We learn that the original polarizable model yields large gas phase water → alcohol transferability errors - the RMS and maximum errors are 2.3 and 5.1 kcal/mol, respectively. These errors are, nevertheless, systematic in that ion-alcohol interactions are overstabilized, and systematic errors typically imply that some essential physics is either missing or misrepresented. A comprehensive analysis shows that when both low- and high-field responses of ligand dipole polarization are described accurately, then transferability improves significantly - the RMS and maximum errors in the gas phase reduce, respectively, to 0.9 and 2.5 kcal/mol. Additionally, predictions of condensed phase transfer free energies also improve. Nevertheless, within the limits of the extrathermodynamic assumptions necessary to separate experimental estimates of salt dissolution into constituent cationic and anionic contributions, we note that the error in the condensed phase is systematic, which we attribute, at least, partially to the parametrization in long-range electrostatics. Overall, this work demonstrates a rational approach to boosting transferability of ionic interactions that will be applicable broadly to improving other polarizable and nonpolarizable models.

Ion-peptide interactions between alkali metal ions and a termini-protected dipeptide: modeling a portion of the selectivity filter in K+ channels

Potassium channels have the unique ability to allow the selective passage of potassium ions at near diffusion-free rates while inhibiting the passage of more abundant sodium ions. Local interactions between chemical functional groups and the ions are responsible for both selectivity and transport. As an initial step in characterizing these interactions, the structures of Na+ and K+ complexed to the Ac-Tyr-NHMe peptide have been determined from infrared laser spectroscopy and supporting ab initio calculations. Ac-Tyr-NHMe, a termini-protected peptide sequence, replicates the GYG portion of one of the four peptide chains comprising the selectivity filter of a K+ channel. This peptide contains two carbonyl groups, among the eight C[double bond, length as m-dash]O groups forming the S1 binding site of the selectivity filter. Three conformations have been identified for both ions by laser IR-IR double resonance methods. Two conformations have the ion bound to the two C[double bond, length as m-dash]O groups. The third conformation has, in addition, a cation-π interaction with the aromatic ring of tyrosine, i.e. tridentate binding. The relative contributions of the three conformers are approximately the same for K+Ac-Tyr-NHMe, while the tridentate conformer is preferred for Na+Ac-Tyr-NHMe. These differences will be discussed in the context of ion mobility and selectivity.

Quasi-Chemical Theory with Cluster Sampling from Ab Initio Molecular Dynamics: Fluoride (F-) Anion Hydration

Accurate predictions of the hydration free energy for anions typically has been more challenging than that for cations. Hydrogen bond donation to the anion in hydrated clusters such as F(H₂O) _n ^- can lead to delicate structures. Consequently, the energy landscape contains many local minima, even for small clusters, and these minima present a challenge for computational optimization. Utilization of cluster experimental results for the free energies of gas-phase clusters shows that even though anharmonic effects are interesting they need not be of troublesome magnitudes for careful applications of quasi-chemical theory to ion hydration. Energy-optimized cluster structures for anions can leave the central ion highly exposed, and application of implicit solvation models to these structures can incur more serious errors than those for metal cations. Utilizing cluster structures sampled from ab initio molecular dynamics simulations substantially fixes those issues.

Quasi-chemical theory of F-(aq): The "no split occupancies rule" revisited

We use ab initio molecular dynamics (AIMD) calculations and quasi-chemical theory (QCT) to study the inner-shell structure of F^-(aq) and to evaluate that single-ion free energy under standard conditions. Following the "no split occupancies" rule, QCT calculations yield a free energy value of -101 kcal/mol under these conditions, in encouraging agreement with tabulated values (-111 kcal/mol). The AIMD calculations served only to guide the definition of an effective inner-shell constraint. QCT naturally includes quantum mechanical effects that can be concerning in more primitive calculations, including electronic polarizability and induction, electron density transfer, electron correlation, molecular/atomic cooperative interactions generally, molecular flexibility, and zero-point motion. No direct assessment of the contribution of dispersion contributions to the internal energies has been attempted here, however. We anticipate that other aqueous halide ions might be treated successfully with QCT, provided that the structure of the underlying statistical mechanical theory is absorbed, i.e., that the "no split occupancies" rule is recognized.

Assessment of Simple Models for Molecular Simulation of Ethylene Carbonate and Propylene Carbonate as Solvents for Electrolyte Solutions

Progress in understanding liquid ethylene carbonate (EC) and propylene carbonate (PC) on the basis of molecular simulation, emphasizing simple models of interatomic forces, is reviewed. Results on the bulk liquids are examined from the perspective of anticipated applications to materials for electrical energy storage devices. Preliminary results on electrochemical double-layer capacitors based on carbon nanotube forests and on model solid-electrolyte interphase (SEI) layers of lithium ion batteries are considered as examples. The basic results discussed suggest that an empirically parameterized, non-polarizable force field can reproduce experimental structural, thermodynamic, and dielectric properties of EC and PC liquids with acceptable accuracy. More sophisticated force fields might include molecular polarizability and Buckingham-model description of inter-atomic overlap repulsions as extensions to Lennard-Jones models of van der Waals interactions. Simple approaches should be similarly successful also for applications to organic molecular ions in EC/PC solutions, but the important case of Li\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^+$$\end{document}+ deserves special attention because of the particularly strong interactions of that small ion with neighboring solvent molecules. To treat the Li\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^+$$\end{document}+ ions in liquid EC/PC solutions, we identify interaction models defined by empirically scaled partial charges for ion-solvent interactions. The empirical adjustments use more basic inputs, electronic structure calculations and ab initio molecular dynamics simulations, and also experimental results on Li\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^+$$\end{document}+ thermodynamics and transport in EC/PC solutions. Application of such models to the mechanism of Li\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^+$$\end{document}+ transport in glassy SEI models emphasizes the advantage of long time-scale molecular dynamics studies of these non-equilibrium materials.

H. R, Thamleena A. H, Joseph A, Ben A, V. U. K. Roles of different amino-acid residues towards binding and selective transport of K+ through KcsA K+-ion channel

Each amino acid in the selectivity filter plays a distinct role towards binding and transport of K⁺ ion through KcsA.

Towards a Unified Understanding of Lithium Action in Basic Biology and its Significance for Applied Biology

Lithium has literally been everywhere forever, since it is one of the three elements created in the Big Bang. Lithium concentration in rocks, soil, and fresh water is highly variable from place to place, and has varied widely in specific regions over evolutionary and geologic time. The biological effects of lithium are many and varied. Based on experiments in which animals are deprived of lithium, lithium is an essential nutrient. At the other extreme, at lithium ingestion sufficient to raise blood concentration significantly over 1 mM/, lithium is acutely toxic. There is no consensus regarding optimum levels of lithium intake for populations or individuals-with the single exception that lithium is a generally accepted first-line therapy for bipolar disorder, and specific dosage guidelines for sufferers of that condition are generally agreed on. Epidemiological evidence correlating various markers of social dysfunction and disease vs. lithium level in drinking water suggest benefits of moderately elevated lithium compared to average levels of lithium intake. In contrast to other biologically significant ions, lithium is unusual in not having its concentration in fluids of multicellular animals closely regulated. For hydrogen ions, sodium ions, potassium ions, calcium ions, chloride ions, and magnesium ions, blood and extracellular fluid concentrations are closely and necessarily regulated by systems of highly selective channels, and primary and secondary active transporters. Lithium, while having strong biological activity, is tolerated over body fluid concentrations ranging over many orders of magnitude. The lack of biological regulation of lithium appears due to lack of lithium-specific binding sites and selectivity filters. Rather lithium exerts its myriad physiological and biochemical effects by competing for macromolecular sites that are relatively specific for other cations, most especially for sodium and magnesium. This review will consider what is known about the nature of this competition and suggest using and extending this knowledge towards the goal of a unified understanding of lithium in biology and the application of that understanding in medicine and nutrition.

Ion-Specific Effects in Carboxylate Binding Sites

Specific ion binding by carboxylates (-COO^-) is a broadly important topic because -COO^- is one of the most common functional groups coordinated to metal ions in metalloproteins and synthetic polymers. We apply quantum chemical methods and the quasi-chemical free-energy theory to investigate how variations in the number of -COO^- ligands in a binding site determine ion-binding preferences. We study a series of monovalent (Li⁺, Na⁺, K⁺, Cs⁺) and divalent (Zn²⁺, Ca²⁺) ions relevant to experimental work on ion channels and ionomers. Of two competing hypotheses, our results support the ligand field strength hypothesis and follow the reverse Hofmeister series for ion solvation and ion transfer from aqueous solution to binding sites with the preferred number of ligands. New insight arises from the finding that ion-binding sequences can be manipulated and even reversed just by constraining the number of carboxylate ligands in the binding sites. Our results help clarify the discrepancy in ion association between molecular ligands in aqueous solutions and ionomers, and their chemical analogues in ion-channel binding sites.

Dispersion- and Exchange-Corrected Density Functional Theory for Sodium Ion Hydration

A challenge in density functional theory is developing functionals that simultaneously describe intermolecular electron correlation and electron delocalization. Recent exchange-correlation functionals address those two issues by adding corrections important at long ranges: an atom-centered pairwise dispersion term to account for correlation and a modified long-range component of the electron exchange term to correct for delocalization. Here we investigate how those corrections influence the accuracy of binding free energy predictions for sodium-water clusters. We find that the dual-corrected ωB97X-D functional gives cluster binding energies closest to high-level ab initio methods (CCSD(T)). Binding energy decomposition shows that the ωB97X-D functional predicts the smallest ion-water (pairwise) interaction energy and larger multibody contributions for a four-water cluster than most other functionals - a trend consistent with CCSD(T) results. Also, ωB97X-D produces the smallest amounts of charge transfer and the least polarizable waters of the density functionals studied, which mimics the lower polarizability of CCSD. When compared with experimental binding free energies, however, the exchange-corrected CAM-B3LYP functional performs best (error <1 kcal/mol), possibly because of its parametrization to experimental formation enthalpies. For clusters containing more than four waters, "split-shell" coordination must be considered to obtain accurate free energies in comparison with experiment.

Octa-Coordination and the Aqueous Ba(2+) Ion

The hydration structure of Ba(2+) ion is important for understanding blocking mechanisms in potassium ion channels. Here, we combine statistical mechanical theory, ab initio molecular dynamics simulations, and electronic structure methods to calculate the hydration free energy and local hydration structure of Ba(2+)(aq). The predicted hydration free energy (-304 ± 1 kcal/mol) agrees with the experimental value (-303 kcal/mol) when a maximally occupied, unimodal inner solvation shell is treated. In the local environment defined by the first shell of hydrating waters, Ba(2+) is directly and stably coordinated by eight (8) waters. Octa-coordination resembles the crystal structure of Ba(2+) and K(+) bound in potassium ion channels, but differs from the local hydration structure of K(+)(aq) determined earlier.

Role of methyl-induced polarization in ion binding

The chemical property of methyl groups that renders them indispensable to biomolecules is their hydrophobicity. Quantum mechanical studies undertaken here to understand the effect of point substitutions on potassium (K-) channels illustrate quantitatively how methyl-induced polarization also contributes to biomolecular function. K- channels regulate transmembrane salt concentration gradients by transporting K(+) ions selectively. One of the K(+) binding sites in the channel's selectivity filter, the S4 site, also binds Ba(2+) ions, which blocks K(+) transport. This inhibitory property of Ba(2+) ions has been vital in understanding K-channel mechanism. In most K-channels, the S4 site is composed of four threonine amino acids. The K channels that carry serine instead of threonine are significantly less susceptible to Ba(2+) block and have reduced stabilities. We find that these differences can be explained by the lower polarizability of serine compared with threonine, because serine carries one less branched methyl group than threonine. A T→S substitution in the S4 site reduces its polarizability, which, in turn, reduces ion binding by several kilocalories per mole. Although the loss in binding affinity is high for Ba(2+), the loss in K(+) binding affinity is also significant thermodynamically, which reduces channel stability. These results highlight, in general, how biomolecular function can rely on the polarization induced by methyl groups, especially those that are proximal to charged moieties, including ions, titratable amino acids, sulfates, phosphates, and nucleotides.

Hydration structure of salt solutions from ab initio molecular dynamics

The solvation structures of Na(+), K(+), and Cl(-) ions in aqueous solution have been investigated using density functional theory (DFT) based Car-Parrinello (CP) molecular dynamics (MD) simulations. CPMD trajectories were collected for systems containing three NaCl or KCl ion pairs solvated by 122 water molecules using three different but commonly employed density functionals (BLYP, HCTH, and PBE) with electron correlation treated at the level of the generalized gradient approximation (GGA). The effect of including dispersion forces was analyzed through the use of an empirical correction to the DFT-GGA scheme. Special attention was paid to the hydration characteristics, especially the structural properties of the first solvation shell of the ions, which was investigated through ion-water radial distribution functions, coordination numbers, and angular distribution functions. There are significant differences between the present results obtained from CPMD simulations and those provided by classical MD based on either the CHARMM force field or a polarizable model. Overall, the computed structural properties are in fair agreement with the available experimental results. In particular, the observed coordination numbers 5.0-5.5, 6.0-6.4, and 6.0-6.5 for Na(+), K(+), and Cl(-), respectively, are consistent with X-ray and neutron scattering studies but differ somewhat from some of the many other recent computational studies of these important systems. Possible reasons for the differences are discussed.

Simulation studies of the mechanism of membrane transporters

Membrane transporters facilitate active transport of their specific substrates, often against their electrochemical gradients across the membrane, through coupling the process to various sources of cellular energy, for example, ATP binding and hydrolysis in primary transporters, and pre-established electrochemical gradient of molecular species other than the substrate in the case of secondary transporters. In order to provide efficient energy-coupling mechanisms, membrane transporters have evolved into molecular machines in which stepwise binding, translocation, and transformation of various molecular species are closely coupled to protein conformational changes that take the transporter from one functional state to another during the transport cycle. Furthermore, in order to prevent the formation of leaky states and to be able to pump the substrate against its electrochemical gradient, all membrane transporters use the widely-accepted "alternating access mechanism," which ensures that the substrate is only accessible from one side of the membrane at a given time, but relies on complex and usually global protein conformational changes that differ for each family of membrane transporters. Describing the protein conformational changes of different natures and magnitudes is therefore at the heart of mechanistic studies of membrane transporters. Here, using a number of membrane transporters from diverse families, we present common protocols used in setting up and performing molecular dynamics simulations of membrane transporters and in analyzing the results, in order to characterize relevant motions of the system. The emphasis will be on highlighting how optimal design of molecular dynamics simulations combined with mechanistically oriented analysis can shed light onto key functionally relevant protein conformational changes in this family of membrane proteins.

Ion binding sites and their representations by reduced models

The binding of small metal ions to complex macromolecular structures is typically dominated by strong local interactions of the ion with its nearest ligands. Progress in understanding the molecular determinants of ion selectivity can often be achieved by considering simplified reduced models comprised of only the most important ion-coordinating ligands. Although the main ingredients underlying simplified reduced models are intuitively clear, a formal statistical mechanical treatment is nonetheless necessary in order to draw meaningful conclusions about complex macromolecular systems. By construction, reduced models only treat the ion and the nearest coordinating ligands explicitly. The influence of the missing atoms from the protein or the solvent is incorporated indirectly. Quasi-chemical theory offers one example of how to carry out such a separation in the case of ion solvation in bulk liquids, and in several ways, a statistical mechanical formulation of reduced binding site models for macromolecules is expected to follow a similar route. However, there are also important differences when the ion-coordinating moieties are not solvent molecules from a bulk phase but are molecular ligands covalently bonded to a macromolecular structure. Here, a statistical mechanical formulation of reduced binding site models is elaborated to address these issues. The formulation provides a useful framework to construct reduced binding site models, and define the average effect from the surroundings on the ion and the nearest coordinating ligands.

Current and selectivity in a model sodium channel under physiological conditions: Dynamic Monte Carlo simulations

A reduced model of a sodium channel is analyzed using Dynamic Monte Carlo simulations. These include the first simulations of ionic current under approximately physiological ionic conditions through a model sodium channel and an analysis of how mutations of the sodium channel's DEKA selectivity filter motif transform the channel from being Na(+) selective to being Ca(2+) selective. Even though the model of the pore, amino acids, and permeant ions is simplified, the model reproduces the fundamental properties of a sodium channel (e.g., 10 to 1 Na(+) over K(+) selectivity, Ca(2+) exclusion, and Ca(2+) selectivity after several point mutations). In this model pore, ions move through the pore one at a time by simple diffusion and Na(+) versus K(+) selectivity is due to both the larger K(+) not fitting well into the selectivity filter that contains amino acid terminal groups and K(+) moving more slowly (compared to Na(+)) when it is in the selectivity filter.

A local entropic signature of specific ion hydration

Monovalent ion hydration entropies are analyzed via energetic partitioning of the potential distribution theorem free energy. Extensive molecular dynamics simulations and free energy calculations are performed over a range of temperatures to determine the electrostatic and van der Waals components of the entropy. The far-field electrostatic contribution is negative and small in magnitude, and it does not vary significantly as a function of ion size, consistent with dielectric models. The local electrostatic contribution, however, varies widely as a function of ion size; the sign yields a direct indication of the kosmotropic (strongly hydrated) or chaotropic (weakly hydrated) nature of the ion hydration. The results provide a thermodynamic signature for specific ion effects in hydration and are consistent with experiments that suggest minimal perturbations of water structure outside the first hydration shell. The hydration entropies are also examined in relation to the corresponding entropies for the isoelectronic rare gas pairs; an inverse correlation is observed, as expected from thermodynamic hydration data.

Probing the thermodynamics of competitive ion binding using minimum energy structures

Ion binding is known to affect the properties of biomolecules and is directly involved in many biochemical pathways. Because of the highly polar environments where ions are found, a quantum-mechanical treatment is preferable for understanding the energetics of competitive ion binding. Due to computational cost, a quantum mechanical treatment may involve several approximations, however, whose validity can be difficult to determine. Using thermodynamic cycles, we show how intuitive models for complicated ion binding reactions can be built up from simplified, isolated ion-ligand binding site geometries suitable for quantum mechanical treatment. First, the ion binding free energies of individual, minimum energy structures determine their intrinsic ion selectivities. Next, the relative propensity for each minimum energy structure is determined locally from the balance of ion-ligand and ligand-ligand interaction energies. Finally, the environment external to the binding site exerts its influence both through long-ranged dispersive and electrostatic interactions with the binding site as well as indirectly through shifting the binding site compositional and structural preferences. The resulting picture unifies field-strength, topological control, and phase activation viewpoints into a single theory that explicitly indicates the important role of solute coordination state on overall reaction energetics. As an example, we show that the Na(+) → K(+) selectivities can be recovered by correctly considering the conformational contribution to the selectivity. This can be done even when constraining configuration space to the neighborhood around a single, arbitrarily chosen, minimum energy structure. Structural regions around minima for K(+)- and Na(+)-water clusters are exhibited that display both rigid/mechanical and disordered/entropic selectivity mechanisms for both Na(+) and K(+). Thermodynamic consequences of the theory are discussed with an emphasis on the role of coordination structure in determining experimental properties of ions in complex biological environments.