Methane storage in dry water gas hydrates

Liquid marbles: review of recent progress in physical properties, formation techniques, and lab-in-a-marble applications in microreactors and biosensors

Liquid marbles (LMs) are nonsticking droplets whose surfaces are covered with low-wettability particles. Owing to their high mobility, shape reconfigurability, and widely accessible liquid/particle possibilities, the research on LMs has flourished since 2001. Their physical properties, fabrication mechanisms, and functionalisation capabilities indicate their potential for various applications. This review summarises the fundamental properties of LMs, the recent advances (mainly works published in 2020-2023) in the concept of LMs, physical properties, formation methods, LM-templated material design, and biochemical applications. Finally, the potential development and variations of LMs are discussed.

Enhanced formation of methane hydrate from active ice with high gas uptake

Gas hydrates provide alternative solutions for gas storage & transportation and gas separation. However, slow formation rate of clathrate hydrate has hindered their commercial development. Here we report a form of porous ice containing an unfrozen solution layer of sodium dodecyl sulfate, here named active ice, which can significantly accelerate gas hydrate formation while generating little heat. It can be readily produced via forming gas hydrates with water containing very low dosage (0.06 wt% or 600 ppm) of surfactant like sodium dodecyl sulfate and dissociating it below the ice point, or by simply mixing ice powder or natural snow with the surfactant. We prove that the active ice can rapidly store gas with high storage capacity up to 185 Vg Vw-1 with heat release of ~18 kJ mol-1 CH4 and the active ice can be easily regenerated by depressurization below the ice point. The active ice undergoes cyclic ice-hydrate-ice phase changes during gas uptake/release, thus removing most critical drawbacks of hydrate-based technologies. Our work provides a green and economic approach to gas storage and gas separation and paves the way to industrial application of hydrate-based technologies.

Advances in Nanomaterials for Sustainable Gas Separation and Storage: Focus on Clathrate Hydrates

ConspectusClathrate hydrates, also known as gas hydrates, are a type of inclusion compound formed in highly developed nanoporous lattice spaces created by water molecules, where gas molecules such as CO2, H2, CH4, and other low-molecular-weight liquid molecules are trapped. The nanoporous cage formed by water molecules serves as the "host", while the trapped gas or low-molecular-weight liquid molecules such as tetrahydrofuran act as "guests". Early on, clathrate hydrates drew attention as a potential replacement for conventional natural gas due to their natural gas hydrate form, which contains natural gases as guests and exists in permafrost or sea floors. Recently, based on the unique physicochemical properties of clathrate hydrates, efforts are being made to utilize synthetic clathrate hydrates in various separation processes such as post- and pre-combustion CO2 capture, H2 storage, natural gas storage and transportation, wastewater desalination, and more. While it is undeniable that clathrate hydrates are based on principles that are beneficial for the separation and storage of gas molecules, there are several challenges that must be addressed for their practical application. These challenges include (i) the limitation of gas storage capacity due to the confined size of nanoporous cages, (ii) the relatively high-pressure and low-temperature thermodynamic storage conditions typically required for clathrate hydrate formation, and (iii) slow formation kinetics and low gas hydrate conversion, which are also essential issues that need to be resolved for the meaningful implementation of clathrate hydrates. In this Account, we aim to introduce recent noteworthy research findings, including those from our research team, focusing on addressing these challenges. We explored the untapped potential of clathrate hydrates by bridging the gap between macroscopic and microscopic properties. This has led to breakthroughs in sustainable gas separation and storage applications. By revealing the hidden nature of these hydrates, we have effectively mitigated their inherent limitations, setting the stage for more feasible and efficient H2 storage solutions through the introduction of hydrogen-natural gas blends to clathrate hydrates. Additionally, we have demonstrated the tuning effect on all naturally formed hydrate structures, offering new insights into their underlying properties and macroscopic behavior. Furthermore, our research has proposed a highly efficient hydrate-based pre-combustion CO2 capture approach that leverages porous media with appropriate wettability and considers the implications of microstructure properties. This emphasizes the crucial connection between nano-structure and macroscopic properties, underscoring the significance of understanding their interplay for economic feasibility. We believe that our efforts to unveil the hidden nature of gas hydrates provide strategies to address challenges and lay the groundwork for practical applications.

Large-Scale Nonequilibrium Molecular Studies of Thermal Hydrate Dissociation

The energy content of methane hydrate reservoirs (MHRs) is at least twice that of conventional fossil fuels. So, there is considerable interest in their commercial development by heating, among other dissociation mechanisms. However, a few researchers have highlighted the potentially uncontrollable release of methane from MHRs, which could occur because of global warming. Therefore, it is crucial to understand the kinetics of thermal hydrate dissociation to safely develop these resources and prevent the release of this greenhouse gas into the environment. Although there have been several molecular studies of thermal dissociation, most of these use small simulation domains that cannot capture the transient nature of the process. To address this limitation, we performed coarse-grained molecular dynamics (CGMD) simulations on a significantly larger domain with a hundred times more hydrate unit cells than those used in previous studies. We monitored the kinetics of dissociation using an image-processing algorithm and observed the dynamics of the process while maintaining a thermal gradient at the dissociation front. For the first time, we report the formation of an unstable secondary dissociation path that triggers gas bubbles within the solid hydrate. The kinetics of thermal dissociation appears to occur in three stages. In the first stage, the energy of the system increases until it exceeds the activation energy, and dissociation is initiated. Consistent dissociation occurs in the second stage, whereas the third stage involves the dissociation of the remaining hydrates across a nonplanar and heterogeneous interface.

Enabling hydrate-based methane storage under mild operating conditions by periodic mesoporous organosilica nanotubes

Biomethane is a renewable natural gas substitute produced from biogas. Storage of this sustainable energy vector in confined clathrate hydrates, encapsulated in the pores of a host material, is a highly promising avenue to improve storage capacity and energy efficiency. Herein, a new type of periodic mesoporous organosilica (PMO) nanotubes, referred to as hollow ring PMO (HR-PMO), capable of promoting methane clathrate hydrate formation under mild working conditions (273 K, 3.5 MPa) and at high water loading (5.1 g water/g HR-PMO) is reported. Gravimetric uptake measurements reveal a steep single-stepped isotherm and a noticeably high methane storage capacity (0.55 g methane/g HR-PMO; 0.11 g methane/g water at 3.5 MPa). The large working capacity throughout consecutive pressure-induced clathrate hydrate formation-dissociation cycles demonstrates the material's excellent recyclability (97% preservation of capacity). Supported by ex situ cryo-electron tomography and x-ray diffraction, HR-PMO nanotubes are hypothesized to promote clathrate hydrate nucleation and growth by distribution and confinement of water in the mesopores of their outer wall, along the central channels of the nanotubes and on the external nanotube surface. These findings showcase the potential for application of organosilica materials with hierarchical and interconnected pore systems for pressure-based storage of biomethane in confined clathrate hydrates.

Dry liquid metals stabilized by silica particles: Synthesis and application in photothermoelectric power generation

HYPOTHESIS

Gallium-based room-temperature liquid metals (LMs) have unique physicochemical properties; however, their high surface tension, low flowability, and high corrosiveness to other materials limit their advanced processing (including precise shaping) and application. Consequently, LM-rich free-flowing powders, named "dry LMs" that offer the inherent advantages of dry powders, should play a critical role in expanding the application scope of LMs.

EXPERIMENTS

A general method of preparing silica-nanoparticle-stabilized LMs in the form of LM-rich powders (>95 wt% LM) is developed.

FINDINGS

Dry LMs can be simply prepared by mixing LMs with silica nanoparticles in a planetary centrifugal mixer in the absence of solvents. As a sustainable dry-process route alternative to wet-process routes, this ecofriendly and simple method of dry LM fabrication has several advantages, e.g., high throughput, scalability, and low toxicity owing to the lack of organic dispersion agents and milling media. Moreover, the unique photothermal properties of dry LMs are used for photothermal electric power generation. Thus, dry LMs not only pave the way for the use of LMs in powder form but also provide a new opportunity for expanding their application scope in energy conversion systems.

Dry Water as a Promoter for Gas Hydrate Formation: A Review

Applications of clathrate hydrate require fast formation kinetics of it, which is the long-standing technological bottleneck due to mass transfer and heat transfer limitations. Although several methods, such as surfactants and mechanical stirring, have been employed to accelerate gas hydrate formation, the problems they bring are not negligible. Recently, a new water-in-air dispersion stabilized by hydrophobic nanosilica, dry water, has been used as an effective promoter for hydrate formation. In this review, we summarize the preparation procedure of dry water and factors affecting the physical properties of dry water dispersion. The effect of dry water dispersion on gas hydrate formation is discussed from the thermodynamic and kinetic points of view. Dry water dispersion shifts the gas hydrate phase boundary to milder conditions. Dry water increases the gas hydrate formation rate and improves gas storage capacity by enhancing water-guest gas contact. The performance comparison and synergy of dry water with other common hydrate promoters are also summarized. The self-preservation effect of dry water hydrate was investigated. Despite the prominent effect of dry water in promoting gas hydrate formation, its reusability problem still remains to be solved. We present and compare several methods to improve its reusability. Finally, we propose knowledge gaps in dry water hydrate research and future research directions.

Robust cellulose-based hydrogel marbles with excellent stability for gas sensing

Liquid marbles, as particle-armored droplets, have potential applications in microreactors, biomedicine, controlled release and gas detection. To improve the stability and biocompatibility of marble, biocompatible cellulose acetate particles and 3-allyloxy-2-hydroxy-propyl-cellulose (AHP-cellulose) were used to fabricate robust cellulose-based liquid marbles with excellent stability. Liquid marble was gelled into hydrogel marble via blue-light-irradiated polymerization of AHP-cellulose. The mechanical properties of cellulose-based hydrogel marble are superior to those of liquid marble. The rupture height of liquid marble is 10.5 m, which is 420 times greater than that of water marble (0.025 m). Surprisingly, the hydrogel marble with a 3 % AHP-cellulose concentration remained intact even after being dropped from a height of 50 m, which is comparable with the ability of a leather ball to withstand larger impact. When released from a height of 60 mm, hydrogel marble bounced to approximately 25.5 mm, 881 % higher than liquid marble (2.6 mm). Hydrogel marble exhibited long-lasting stability and was capable of monitoring ammonia with a detection limit of 365.2 mg/m³. The biocompatible cellulose-based hydrogel marble with excellent mechanical stability and reusability detection has great potential in chemical and environmental engineering as gas sensors.

"Nanoreactors" for Boosting Gas Hydrate Formation toward Energy Storage Applications

Hydrogen and methane can be molecularly incorporated in ice-like water structures up to mass fractions of 4.3% and 13.3%, respectively. The resulting solid structures, called gas hydrates, offer great potential for the efficient storage of hydrogen and natural gas. However, slow gas encapsulation by bulk water hinders this application. Porous structures have been shown to effectively promote gas hydrate formation and are a potential enabler for the development of hydrate-based gas storage technologies. Here, we offer an insightful perspective on using porous structures as nanoreactors for achieving fast gas hydrate formation for gas storage applications. We critically discuss and elucidate the working mechanisms of nanoreactors and identify the criteria for efficient nanoreactors. Based on the concepts founded, we propose a theoretical framework for designing next-generation porous materials for delivering better promoting effects on gas hydrate formation.

Magnetically Recyclable -SO3--Coated Nanoparticles Promote Gas Storage via Forming Hydrates

Efficient gas enrichment approaches are of great importance for the storage and transportation of clean energy and the sequestration of carbon dioxide. Of special interest is the regulated gas hydrate-based method; however, its operation requires adequate additives to overcome the low-storage capacity issue. Thus, this method is not economically feasible or environmentally friendly. In this work, a novel recyclable hydrate promoter of copolystyrene-sodium styrenesulfonate@Fe3O4 (PNS) nanoparticles with an integrated core-shell structure was synthesized through emulsion polymerization. This was found to effectively reduce the induction time of methane hydrate formation by one-third compared with the widely used sodium dodecyl sulfate (SDS); the corresponding gas storage capacity was also comparable, up to 155 v/v. In addition, the PNS nanoparticles showed a good performance in foam inhibition upon hydrate decomposition, which frequently occurred with the use of SDS and other surfactant-based promoters. In particular, the new promoters contributed to a more than 30% increase in CO2 storage capacity, coacting with the fine sediments that mimic a marine environment. This provided further possibilities of sequestering CO2 in the form a gas hydrate under the seafloor. The underlying mechanism was proposed to involve anchored surfactants on the surface and tiny channels between the nanoparticles that lead to rapid hydrate nucleation and controlled growth. The results showed that the integrated magnetically recovering nanoparticles developed in this study could improve the efficiency of gas storage by forming gas hydrates; the excellent recycling performance paved the way for solving the economic and environmental problems encountered in additive usage.

Methane Adsorption Properties in Biomaterials: A Possible Route to Gas Storage and Transportation

Methane can be stored in biomaterials rapidly in hydrate form with low energy consumption. Considering the high cost of biomaterials (vegetables or fruits), agricultural wastes may be more practical. In this work, the characteristics of methane storage in two low-cost agricultural wastes, eggplant, and static water, are studied and compared. The methane adsorption rates and capacities were greatly enhanced in three biomaterials compared with that in the static water, while only corncob pith maintained relatively high gas adsorption capacity (72 v/v) and adsorption rate (~0.0300 MPa/min) in repeatable gas adsorption-desorption processes. Further investigations on the gas adsorption behavior in the corncob pith revealed that the porous structure of corncob pith generates larger specific surface areas, providing more nucleation sites for hydrate nucleation. In addition, the hydrophobic and hydrophilic performance of corncob pith components also affect the hydrate formation. The porous structure of corncob pith reduces its water activity, which decreases the stability of methane hydrate (~0.6 MPa higher at 273.15 K for equilibrium pressure than bulk phase). These results demonstrate the great gas adsorption performance and mild storage-transportation conditions of low-cost agricultural wastes and provide significant information in promoting their application in gas storage and transportation.

Interfacial study of clathrates confined in reversed silica pores

Storing methane in clathrates is one of the most promising alternatives for transporting natural gas (NG) as it offers similar gas densities to liquefied and compressed NG while offering lower safety risks. However, the practical use of clathrates is limited given the extremely low temperatures and high pressures necessary to form these structures. Therefore, it has been suggested to confine clathrates in nanoporous materials, as this can facilitate clathrate's formation conditions while preserving its CH4 volumetric storage. Yet, the choice of nanoporous materials to be employed as the clathrate growing platform is still rather arbitrary. Herein, we tackle this challenge in a systematic way by computationally exploring the stability of clathrates confined in alkyl-grafted silica materials with different pore sizes, ligand densities and ligand types. Based on our findings, we are able to propose key design criteria for nanoporous materials favoring the stability of a neighbouring clathrate phase, namely large pore sizes, high ligand densities, and smooth pore walls. We hope that the atomistic insight provided in this work will guide and facilitate the development of new nanomaterials designed to promote the formation of clathrates.

Clathrate Adhesion Induced by Quasi-Liquid Layer

The adhesive force of clathrates to surfaces is a century-old problem of pipeline blockage for the energy industry. Here, we provide new physical insight into the origin of this force by accounting for the existence of a quasi-liquid layer (QLL) on clathrate surfaces. To gain this insight, we measure the adhesive force between a tetrahydrofuran clathrate and a solid sphere. We detect a strong adhesion, which originates from a capillary bridge that is formed from a nanometer-thick QLL on the clathrate surface. The curvature of this capillary bridge is nanoscaled, causes a large negative Laplace pressure, and leads to a strong capillary attraction. The microscopic capillary bridge expands and consolidates over time. This dynamic behavior explains the time-dependent increase of measured capillary forces. The adhesive force decreases greatly upon increasing the roughness and the hydrophobicity of the sphere, which founds the fundamental basics for reducing clathrate adhesion by using surface coating.

Ultrahigh-Sensitive Compression-Stress Sensor Using Integrated Stimuli-Responsive Materials

Measurement of mechanical stresses, such as compression, shear, and tensile stresses, contributes toward achieving a safer and healthier life. In particular, the detection of weak compression stresses is required for healthcare monitoring and biomedical applications. Compression stresses in the order of 10⁶ -10¹⁰  Pa have been visualized and/or quantified using mechano-responsive materials in previous works. However, in general, it is not easy to detect compression stresses weaker than 10³  Pa using conventional mechano-responsive materials because the dynamic motion of the rigid mechano-responsive molecules is not induced by such a weak stress. In the present work, weak compression stresses in the order of 10⁰ -10³  Pa are visualized and measured via the integration of stimuli-responsive materials, such as layered polydiacetylene (PDA) and dry liquid (DL), through response cascades. DLs consisting of liquid droplets covered by solid particles release the interior liquid and collapse with application of a weak compression stress. The color of the layered PDA is changed by the spilled liquid as a chemical stress. A variety of weak compression stresses, such as expiratory pressure, are visualized and colorimetrically measured using the paper-based device of the integrated stimuli-responsive materials. Diverse mechano-sensing devices can be designed via the integration of stimuli-responsive materials.

Insight to hydrophobic SiO2 encapsulated SiO2 gel: Preparation and application in fire extinguishing

Micron-sized hydrophobic SiO₂ encapsulated SiO₂ gel (HSESG) was prepared successfully by using SiO₂ gel as the solid core and hydrophobic nano-SiO₂ particle as the shell under high-speed shear stirring. The flowability, stability, particle size distribution, bulk density and water repellency of the powder were measured separately, and it was concluded that this type of product can exhibit smaller static angle, larger flow rate and lower bulk density. After the formation of a stable spatial network of SiO₂ gel in its interior, relevant fire extinguishing experiments were carried out and HSESG exhibits higher efficiency in suppressing wood stack fires than that of ordinary dry water (DW) and ABC dry powder. As a high-efficiency fire-extinguishing material, it also exhibits excellent environmental friendliness and non-toxicity, which will make it have the potential to develop a new application market.

Fire extinguishing performance and mechanism for several typical dry water extinguishing agents

In this work, four new dry water fire extinguishing agents (FEAs) were prepared by hydrophobic SiO₂ and aqueous solution under certain conditions. The dry water FEAs were developed and we conducted two types of fire extinguishing experiments (i.e., class A solid fire and class B liquid fire test). Thermocouples and a color video camera were used to measure burning temperature and record the fire extinguishing process. Results indicate that the new dry water FEAs have the ability to extinguish A, B and C fires, and have a better cooling effect than dry powder FEA. It is noted, compared with traditional FEAs, that dry water FEAs have the advantages of high efficiency and high speed, and have a potential application prospect.

Four new dry water fire extinguishing agents (FEAs) were developed by hydrophobic SiO₂ and aqueous solution. Among them, dry water FEA with ammonium dihydrogen phosphate has the best extinguishing effect via temperature changes by thermocouples.

Microscopic Molecular Insights into Hydrate Formation and Growth in Pure and Saline Water Environments

The growth dynamics of natural gas hydrates in saline water has been studied using copious experiments and spectroscopic observations; however, the microscopic evidences to the structural and molecular transformations that they have provided are poorly understood. In this view, we perform extensive molecular dynamics simulations to gain physical insights into the formation and growth mechanism of naturally occurring gas hydrates with a wide variation in the amount of methane (1:5 to 1:18 methane/water ratio) in pure and salt (0-5 wt %) water environments at 50 MPa and 260 K. A couple of new findings analyzed from the number of cages and F_4φ order parameter are as follows: (a) 1:6 (methane/water ratio) is an optimum ratio for the rapid growth of a properly ordered hydrate in pure water at which the hydrate growth retards with increasing salt concentration, (b) there is an inconsequential difference between methane hydrate dynamics in pure water and 0.8 and 1.5 wt % salt water at a ratio of 1:12 (methane/water), and (c) lower methane (1:18) and salt (0.8 wt %) concentrations promote hydrate growth. Besides, this study observes the structural coexistence of S-I and S-II methane hydrates as the large 5¹²6⁴ cages appear along with the small 5¹² and large 5¹²6² cages, in which the low methane concentration favors the S-II structure.

Enhanced methane gas storage in the form of hydrates: role of the confined water molecules in silica powders

Methane hydrates are promising materials for storage and transportation of natural gas; however, the slow kinetics and inefficient water to hydrate conversions impede its broad scale utilisation. The purpose of the present study is to demonstrate rapid (2-3 h) and efficient methane hydrate conversions by utilising the water molecules confined in the intra- and inter-granular space of silica powders. All the experiments were conducted with amorphous silica (10 g) powders of 2-30 μm; 10-20 nm grain size, to mimic the hydrate formations in fine sand and clay dominated environments under moderate methane pressure (7-8 MPa). Encasing of methane molecules in hydrate cages was confirmed by Raman spectroscopic (ex situ) and thermodynamic phase boundary measurements. The present studies reveal that the water to hydrate conversion is relatively slower in 10-20 nm grain size silica, although the nucleation event is rapid in both silicas. The process of hydrate conversion is vastly diffusion-controlled, and this was distinctly observed during the hydrate growth in nanosize silica.

Nonmonotonous Lattice Distortion Model for Gas Hydrates

A gas hydrate forms when the hydrogen-bonded crystal structure of water entraps the small-sized gas molecules at a relatively low temperature and high pressure. Experimental and spectroscopic studies prove that the inclusion of a guest into an empty cavity leads to the distortion of the hydrate lattice via either the contraction or expansion of the cavity, which depends on the size and functional group of the guest. However, the existing lattice distortion theories represent only the expansion phenomena, and consequently, the degree of distortion is reported as a monotonous function of the size of the guest. Addressing this research gap, we propose the lattice distortion by using the statistical thermodynamics based model, in association with the modified Patel-Teja equation of state, and an ab initio quantum mechanical methodology for cavity potential calculations. To accurately capture the guest-host interactions, we propose the spin-component-scaled modification in the second order Møller-Plesset (SCS-MP2) perturbation theory applied with Dunning's basis set. The half-counterpoise method with the Pauling point correction factor is used to handle the basis set superposition (BSSE) and completeness (BSCE) errors. As an estimate of the degree of lattice distortion, the reference chemical potential difference (RCPD) is calculated by applying linear regression analysis to the experimental data of the hydrate phase equilibrium. We identify a nonmonotonous lattice distortion model, in which RCPD first decreases, and then increases, with the guest size. This result shows that the small guest contracts the cavity and that the larger guest expands the cavity during encapsulation. Therefore, for the first time, we report the RCPD (794.0913 J mol^-1) for the undistorted sII-type hydrate lattice as the minimum of the lattice distortion curve. The proposed model is validated with the phase equilibrium data of methane, nitrogen, oxygen, cyclopropane, propane, and isobutane hydrates that have a wide range of guest sizes.

Direct observation of the attachment behavior of hydrophobic colloidal particles onto a bubble surface

The attachment of solid particles to the surface of immersed gas bubbles plays a fundamental role in surface science, and hence plays key roles in various engineering fields ranging from industrial separation processes to the fabrication of functional materials. However, detailed investigation from a microscopic view on how a single particle attaches to a bubble surface and how the particle properties affect the attachment behavior has been so far scarcely addressed. Here, we observed the attachment of a single particle to a bubble surface using a high-speed camera and systematically investigated the effects of the wettability and shape of particles. We found that hydrophobic particles abruptly "jumped into" the bubble while sliding down the bubble surface to eventually satisfy their static contact angles, the behavior of which induced a much stronger attachment to the bubble surface. Interestingly, the determinant factor for the attachment efficiency of spherical particles was not the wettability of the spherical particles but the location of the initial collision with the bubble surface. In contrast, the attachment efficiency of anisotropically-shaped particles was found to increase with the hydrophobicity caused by a larger contact area to the bubble surface. Last but not least, a simple formulation is suggested to recover the contact angle based on the jump-in behavior.

Gas hydrates in sustainable chemistry

This review includes the current state of the art understanding and advances in technical developments about various fields of gas hydrates, which are combined with expert perspectives and analyses.

Modeling recovery of natural gas from hydrate reservoirs with carbon dioxide sequestration: Validation with Iġnik Sikumi field data

Fundamental understanding of guest gas replacement in hydrate reservoirs is crucial for the enhanced recovery of natural gas and carbon dioxide (CO₂) sequestration. To gain physical insight into this exchange process, this work aims at developing and validating a clathrate hydrate model for gas replacement. Most of the practical concerns associated with naturally occurring gas hydrates, including hydrate formation and dissociation in interstitial pore space between distributed sand particles in the presence of salt ions and in irregular nanometer-sized pores of those particles, irregularity in size of particles and shape of their pores, interphase dynamics during hydrate formation and decay, and effect of surface tension, are addressed. An online parameter identification technique is devised for automatic tuning of model parameters in the field. This model is employed to predict the laboratory-scale data for methane hydrate formation and decomposition. Subsequently, the model is validated with the field data of the Prudhoe Bay Unit on the Alaska North Slope during 2011 and 2012. In this Iġnik Sikumi field experiment, mixed CO₂ (i.e., CO₂ + N₂) is used as a replacement agent for natural gas recovery. It is observed that the proposed formulation secures a promising performance with a maximum absolute average relative deviation (AARD) of about 2.83% for CH₄, which is even lower, 0.84% for CO₂ and 1.67% for N₂.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.

Functionalized Nanoparticles for the Dispersion of Gas Hydrates in Slurry Flow

Gas hydrates are crystals that can form in oil and gas production. Their agglomeration in flowlines may disrupt the normal production. One current strategy of hydrate management is to inject an anti-agglomerant, a type of low-dosage hydrate inhibitor that prevents hydrate agglomeration. Concerns in the use of these chemicals include their toxicity, cost, and environmental impacts. In this study, we exploited functionalized nanoparticles in place of anti-agglomerants to produce hydrate slurry, with the potential benefit of nanoparticles to be more environmentally friendly and conveniently recyclable. We coated 256 nm spherical silica nanoparticles with different hydrophobicity and evaluated their performance for the hydrate dispersion at atmospheric and high pressure. Nanoparticles with moderate hydrophobicity stabilized oil-in-water (O/W) or water-in-oil (W/O) emulsions. Direct visualization of the cyclopentane hydrate formation from the nanoparticle-stabilized emulsions revealed different morphologies of hydrate particles depending on whether the nanoparticles prevented agglomeration. We also measured the apparent viscosity of a hydrate-nanoparticle mixture using a high-pressure rheometer. Nanoparticles with moderate hydrophobicity during hydrate formation slowed the viscosification, reduced the maximum viscosity, increased the water conversion, and ultimately helped to maintain a low steady-state viscosity. Increasing nanoparticle or salt concentrations also improved the gas hydrate dispersion. Our study demonstrated the great potential of using nanoparticles in preventing agglomeration of gas hydrates under realistic pipeline flow conditions.

Dry hydrated potassium carbonate for effective CO2 capture

Dry hydrated potassium carbonate (DHPC) is a free-flowing powder prepared by uniformly mixing hydrated K₂CO₃ and hydrophobic nanosilica. We demonstrated that DHPCs can absorb CO₂ rapidly because of their high surface-to-volume ratio. Their CO₂ capture performance is superior to that of 30 wt% monoethanolamine (MEA), an industry standard. DHPC-75 (containing 75 wt% K₂CO₃) has a CO₂ uptake capacity of 233 mg g^-1 (90% saturation uptake within 13 min), higher than the widely used 30 wt% MEA aqueous solution (111 mg g^-1, 90% saturation uptake within 25 min). DHPC-75 also exhibits an excellent cycling performance, thus becoming a promising candidate for practical application.

Waterborne Polyurethanes as a New and Promising Class of Kinetic Inhibitors for Methane Hydrate Formation

A facile, new and promising technique based on waterborne polymers for designing and synthesizing kinetic hydrate inhibitors (KHIs) has been proposed to prevent methane hydrate formation. This topic is challenging subject in flow assurance problems in gas and oilfields. Proposed technique helps to get KHIs with required number and distance of hydrophilic and hydrophobic groups in molecule and good solubility in water. The performance of these new KHIs was investigated by high pressure micro-differential scanning calorimeter (HP-μDSC) and high-pressure autoclave cell. The results demonstrated the high performance of these inhibitors in delay the induction time (10–20 times) and reduce the hydrate growth rate (3 times). Also they did not increase hydrate dissociation temperature in comparison with pure water and show thermodynamic inhibition as well. Inhibition effect of synthesized polymers is improved with the increase of concentration significantly. Since this is the first report of the use of waterborne polymers as kinetic hydrate inhibitor, we expect that KHIs based on waterborne-based polymers can be a prospective option for preventing methane hydrate formation.

Performance of dry water- and porous carbon-based sorbents for carbon dioxide capture

Carbon dioxide is the primary greenhouse gas that has a strong impact on global warming. Several technologies have been developed for capturing CO₂ to mitigate the greenhouse effect. The objective of this research was to investigate the performance of several sorbents based on dry water and porous carbon materials for capturing CO₂. Seven sorbents were prepared and comparatively evaluated for their CO₂ capture capabilities: (i) Conocarpus biochar (CBC); (ii) commercial activated carbon (CAC); (iii) normal dry water (NDW); (iv) K₂CO₃-treated CBC (TCBC); (v) K₂CO₃-modified dry water (MDW); (vi) MDW and 2% TCBC (MDWTCBC); and (vii) MDW and 2% activated carbon (MDWCAC). The sorption process was carried out with initial CO₂ concentration of 5.7%, temperature of 25 °C, feed gas flow rate of 0.5 l min^-1 and a pressure of 1.0 bar. The pure CO₂ was mixed with O₂ or N₂ to achieve the desired inlet concentration of CO₂. The CO₂ adsorption capacity and partition coefficient (PC) of the tested sorbents were evaluated at 5% and 100% breakthrough (BT). The results showed a longer breakthrough and equilibrium adsorption times for CO₂ when mixed with N₂ than with O₂. Among all sorbents, both CAC and CBC showed enhanced CO₂ capture performance with equilibrium (100% BT) adsorption capacities of 239 and 197 mg g^-1, respectively (in terms of PC: 1.0 × 10^-3 and 7.9 × 10^-4 mol kg^-1 Pa^-1, respectively). In contrast, the performance of TCBC and the dry water-based sorbents was far lower than CAC or CBC. The CO₂ adsorption data fitted well to the non-linearized form of the pseudo-first-order kinetic model. The Fourier-transform infrared spectral patterns indicated that the reaction of CO₂ molecules with the hydroxyl groups of sorbents is possible through the formation of chemisorbed CO₂ species. It could be concluded that the activation process did not play a role in increasing the CO₂ capture performance in order to form new active sorption sites. However, Conocarpus biochar can be used as efficient sorbent for CO₂ capture with a better performance than other materials tested previously (e.g., activated carbon).

Sodium Dodecyl Sulfate Preferentially Promotes Enclathration of Methane in Mixed Methane-Tetrahydrofuran Hydrates

Methane storage in mixed hydrates is advantageous due to faster kinetics and added stability. However, capacity needs to be improved. Here we study mixed hydrates of methane (CH₄) and tetrahydrofuran (THF), in the presence of sodium dodecyl sulfate (SDS) as a kinetic promoter for hydrate formation. We report the co-existence of pure methane (sI) and mixed CH₄-THF hydrates (sII) in the presence of SDS; however, in the absence of SDS, co-existence of pure THF (sII) and mixed CH₄-THF hydrates (sII) was observed. Thus the presence of SDS preferentially promotes the enclathration of methane over that of THF. Furthermore, through in situ Raman spectrometry, complemented by high-pressure differential scanning calorimeter, we present temperature-dependent methane occupancy in small and large cages of sI and sII hydrates. Our findings offer new insights for enhancing the methane storage capacity in more stable sII hydrate configuration for large-scale methane storage via solidified natural gas technology.

•

Sodium dodecyl sulfate preferentially promotes structure I hydrates

•

Co-existence of pure CH₄ (sI) and mixed CH₄-THF hydrates (sII) in the presence of SDS

•

Temperature-dependent CH₄ occupancy in small and large cages of mixed hydrates