Toluene and ethylbenzene aliphatic C-H bond oxidations initiated by a dicopper(II)-mu-1,2-peroxo complex

Intramolecular Phenolic H-Atom Abstraction by a N3ArOH Ligand-Supported (μ-η2:η2-Peroxo)dicopper(II) Species Relevant to the Active Site Function of oxy-Tyrosinase

Synthetic side-on peroxide-bound dicopper(II) (SP) complexes are important for understanding the active site structure/function of many copper-containing enzymes. This work highlights the formation of new {CuII(μ-η2:η2-O22-)CuII} complexes (with electronic absorption and resonance Raman (rR) spectroscopic characterization) using tripodal N3ArOH ligands at -135 °C, which spontaneously participate in intramolecular phenolic H-atom abstraction (HAA). This results in the generation of bis(phenoxyl radical)bis(μ-OH)dicopper(II) intermediates, substantiated by their EPR/UV-vis/rR spectroscopic signatures and crystal structural determination of a diphenoquinone dicopper(I) complex derived from ligand para-C═C coupling. The newly observed chemistry in these ligand-Cu systems is discussed with respect to (a) our Cu-MeAN (tridentate N,N,N',N',N″-pentamethyldipropylenetriamine)-derived model SP species, which was unreactive toward exogenous monophenol addition (J. Am. Chem. Soc. 2012, 134, 8513-8524), emphasizing the impact of intramolecularly tethered ArOH groups, and (b) recent advances in understanding the mechanism of action of the tyrosinase (Ty) enzyme.

Generation and Reactivity of μ-1,2-Peroxo CuIICuII and Bis-μ-oxo CuIIICuIII Species and Catalytic Hydroxylation of Benzene to Phenol with Hydrogen Peroxide

Tetradentate-N4 ligands stabilize dinuclear {CuII(μ-1,2-peroxo)CuII} and {CuIII(μ-O)2CuIII} species, and CuII complexes of these ligands were reported to catalyze the oxidation of benzene with H2O2. Here, we report {CuII(μ-1,2-peroxo)CuII} and {CuIII(μ-O)2CuIII} intermediates of dinucleating bis(tetradentate-N4) ligands depending on the absence or presence of 6-methyl substituents on the terminal pyridine donors, respectively, generated either from {CuICuI} precursors with O2 or from {CuIICuII} precursors with H2O2 and NEt3. Both intermediates are not stable even at low temperatures, but they show no electrophilic HAT reactivity with DHA. Catalytic investigations on the hydroxylation of benzene with excess H2O2 between 30 and 50 °C indicate that both radical-based and {Cu2On}-based mechanisms depend strongly on the catalytic conditions. In the presence of a radical scavenger, TONs of ∼920/∼720 have been achieved without/with the 6-methyl group of the ligand. Although {CuII(μ-OH)CuII} reacts with excess H2O2 at -40 °C to {CuII(OOH)}2 species, these are only stable for seconds at 20 °C and cannot account for catalytic oxidations over a period of 24 h at 30-50 °C.

Ligand Modifications Produce Two-Step Magnetic Switching in a Cobalt(dioxolene) Complex

Mononuclear monodioxolene valence tautomeric (VT) cobalt complexes typically exist in their low spin (l.s.) CoIII (cat2- ) and high spin (h.s.) CoII (sq⋅- ) forms (cat2- =catecholato, and sq⋅- =seminquinonato forms of 3,5-di-t Bu-1,2-dioxolene), which reversibly interconvert via temperature-dependent intramolecular electron transfer. Typically, the remaining four coordination sites on cobalt are supported by a tetradentate ligand whose properties influence the temperature at which VT occurs. We report that replacing one chelating pyridyl arm of tris(2-pyridylmethyl)amine (tpa) with a weaker field ortho-anisole moiety facilitates access to a third magnetic state, and examine a series of related complexes. Variable temperature crystallographic, magnetic, calorimetric, and spectroscopic studies support that this third state is consistent with l.s. CoII (sq⋅- ). Thus, our ligand modifications not only provide access to the VT transition from l.s. CoIII (cat2- ) to l.s. CoII (sq⋅- ), but at higher temperatures, the complex undergoes spin crossover from l.s. CoII (sq⋅- ) to h.s. CoII (sq⋅- ), representing the first example of two-step magnetic switching in a mononuclear monodioxolene cobalt complex. We hypothesize that ligand dynamicity may facilitate access to the rarely observed l.s. CoII (sq⋅- ) intermediate state, suggesting a new design criterion in the development of stimulus-responsive multi-state molecular switches.

Photochemically Mediated Toluene Oxidation through a Copper Complex

A method is described to photochemically oxidize toluene selectively to benzaldehyde, an essential compound in the chemical industry. Copper(I) complexes with different ligands were applied in combination with [Ru(bipy)3 ](PF6 )2 and dioxygen as the oxidant. As a result, a "dioxygen adduct" copper complex, for example, a peroxido complex, is formed as the active species. The copper(II) complex obtained after oxidation can be photochemically reduced to the starting copper(I) species, and the process can be repeated continuously. The ligand tris(2-methylpyridyl)amine (tmpa) led to the highest conversion rates.

Cu(II)-Catalyzed Unsymmetrical Dioxidation of gem-Difluoroalkenes to Generate α,α-Difluorinated-α-phenoxyketones

A Cu-based catalyst system convergently couples gem-difluoroalkenes with phenols under aerobic conditions to deliver α,α-difluorinated-α-phenoxyketones, an unstudied hybrid fluorinated functional group. Composed of α,α-difluorinated ketone and α,α-difluorinated ether moieties, these compounds have rarely been reported as a synthetic intermediate. Computational predictions and later experimental corroboration suggest that the phenoxy-substituted fluorinated ketone's sp3-hybridized hydrate form is energetically favored relative to the respective nonether variant and that perturbation of the electronic character of the ketone can further encourage the formation of the hydrate. The more facile conversion between ketone and hydrate forms suggests that analogues should readily covalently inhibit proteases and other enzymes. Further functionalization of the ketone group enables access to other useful fluorinated functional groups.

Toward Improved Charge Separation through Conformational Control in Copper Coordination Complexes

The continued development of solar energy as a renewable resource necessitates new approaches to sustaining photodriven charge separation (CS). We present a bioinspired approach in which photoinduced conformational rearrangements at a ligand are translated into changes in coordination geometry and environment about a bound metal ion. Taking advantage of the differential coordination properties of Cu^I and Cu^II, these dynamics aim to facilitate intramolecular electron transfer (ET) from Cu^I to the ligand to create a CS state. The synthesis and photophysical characterization of CuCl(dpaa^R) (dpaa = dipicolylaminoacetophenone, with R = H and OMe) are presented. These ligands incorporate a fluorophore that gives rise to a twisted intramolecular charge transfer (TICT) excited state. Excited-state ligand twisting provides a tetragonal coordination geometry capable of capturing Cu^II when an internal ortho-OMe binding site is present. NMR, IR, electron paramagnetic resonance (EPR), and optical spectroscopies, X-ray diffraction, and electrochemical methods establish the ground-state properties of these Cu^I and Cu^II complexes. The photophysical dynamics of the Cu^I complexes are explored by time-resolved photoluminescence and optical transient absorption spectroscopies. Relative to control complexes lacking a TICT-active ligand, the lifetimes of CS states are enhanced ∼1000-fold. Further, the presence of the ortho-OMe substituent greatly enhances the lifetime of the TICT* state and biases the coordination environment toward Cu^II. The presence of Cu^I decreases photoinduced degradation from 14 to <2% but does not result in significant quenching via ET. Factors affecting CS in these systems are discussed, laying the groundwork for our strategy toward solar energy conversion.

Conformationally dynamic copper coordination complexes

The interplay between oxidation state and coordination geometry dictates both kinetic and thermodynamic properties underlying electron transfer events in copper coordination complexes. An ability to stabilize both Cu^I and Cu^II oxidation states in a single conformationally dynamic chelating ligand allows access to controlled redox reactivity. We report an analysis of the conformational dynamics of Cu^I complexes bearing dipicolylaniline (dpa^R) ligands, with ortho-aniline substituents R = H and R = OMe. Variable temperature NMR spectroscopy and electrochemical experiments suggest that in solution at room temperature, an equilibrium exists between two conformers. Two metal-centered redox events are observed which, bolstered by structural information from single crystal X-ray diffraction and solution information from EPR and NMR spectroscopies, are ascribed to the Cu^II/I couple in planar and tetrahedral conformations. Activation and equilibrium parameters for these structural interconversions are presented and provide entry to leveraging redox-triggered conformational dynamics at Cu.

Using a monocopper-superoxo complex to prepare multicopper-peroxo species relevant to proposed enzyme intermediates

With the goal of generating a (peroxo)tricopper species analogous to the Peroxy Intermediate proposed for multicopper oxidases, solutions of the copper-superoxide complex [K(Krypt)][LCuO₂] (L = N,N'-bis(2,6-diisopropylphenyl)-2,6-pyridinedicarboxamide, Krypt = 4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane) were reacted with the dicopper(I) complex [(TPBN)Cu₂(MeCN)₂][PF₆]₂ at -70 °C (TPBN = N,N,N',N'-tetrakis-(2-pyridylmethyl)-1,4-diaminobutane). A metastable intermediate formed, which on the basis of UV-vis, EPR, and resonance Raman spectroscopy was proposed to derive from reaction of two equivalents of the copper-superoxide with one equivalent of the dicopper(I) complex to yield a complex with two (peroxo)dicopper moieties rather than the desired (peroxo)tricopper PI model. A similar intermediate formed upon reaction of [K(Krypt)][LCuO₂] with [(BPMA)Cu(MeCN)][PF₆] (BPMA = N,N-bis(2-pyridylmethyl)-methyl-amine), which contained the same donor set as provided by TPBN. Comparison of resonance Raman data and consideration of structural preferences for LCuX species led to hypothesis of a μ-η¹:η²-peroxo structure for both intermediates.

Characterization of copper complexes with derivatives of the ligand (2-aminoethyl)bis(2-pyridylmethyl)amine (uns-penp) and their reactivity towards oxygen

A series of copper(I) complexes with ligands derived from the tripodal ligand (2-aminoethyl)bis(2-pyridylmethyl)amine (uns-penp) have been structurally characterized and their redox chemistry analyzed by cyclic voltammetry. While the redox potentials of most of the complexes were similar their reactivity towards dioxygen was quite different. While the complex with a ferrocene derived ligand of uns-penp reacted in solution at low temperatures in a two-step reaction from the preliminary formed mononuclear end-on superoxido complex to a quite stable dinuclear peroxido complex it did not react with dioxygen in the solid state. Other complexes also did not react with dioxygen in the solid state while some showed a reversible formation to a green compound, indicating formation of an end-on superoxido complex that unfortunately so far could not be characterized. In contrast, copper complexes with the Me₂uns-penp and Et-iProp-uns-penp formed dinuclear peroxido complexes in a solid-state reaction. While the reaction of dioxygen with the [Cu(Me₂uns-penp]BPh₄ was quite slow an instant reaction took place for [Cu(Et-iProp-uns-penp]BPh. Very unusual, it turned out that crystals of the copper(I) complex that could be structurally characterized still were crystalline when reacted with dioxygen. Therefore, it was possible to solve the structure of the corresponding dinuclear peroxido complex directly from the same batch of crystals. The crystalline structures of the copper(I) and copper(II) complex revealed that the reason for this is the fact, that the copper(I) complex is kind of preorganized for the uptake of dioxygen and does not really change in its overall structure when being oxidized.

Spectroscopic Definition of a Highly Reactive Site in Cu-CHA for Selective Methane Oxidation: Tuning a Mono-μ-Oxo Dicopper(II) Active Site for Reactivity

Using UV-vis and resonance Raman spectroscopy, we identify a [Cu₂O]²⁺ active site in O₂ and N₂O activated Cu-CHA that reacts with methane to form methanol at low temperature. The Cu-O-Cu angle (120°) is smaller than that for the [Cu₂O]²⁺ core on Cu-MFI (140°), and its coordination geometry to the zeolite lattice is different. Site-selective kinetics obtained by operando UV-vis show that the [Cu₂O]²⁺ core on Cu-CHA is more reactive than the [Cu₂O]²⁺ site in Cu-MFI. From DFT calculations, we find that the increased reactivity of Cu-CHA is a direct reflection of the strong [Cu₂OH]²⁺ bond formed along the H atom abstraction reaction coordinate. A systematic evaluation of these [Cu₂O]²⁺ cores reveals that the higher O-H bond strength in Cu-CHA is due to the relative orientation of the two planes of the coordinating bidentate O-Al-O T-sites that connect the [Cu₂O]²⁺ core to the zeolite lattice. This work along with our earlier study ( J. Am. Chem. Soc, 2018, 140, 9236-9243) elucidates how zeolite lattice constraints can influence active site reactivity.

Structural Determination of an Unusual CuI -Porphyrin-π-Bond in a Hetero-Pacman Cu-Zn-Complex

The synthesis and characterization of a hetero‐dinuclear compound is presented, in which a copper(I) trishistidine type coordination unit is positioned directly above a zinc porphyrin unit. The close distance between the two coordination fragments is secured by a rigid xanthene backbone, and a unique (intramolecular) copper porphyrin‐π‐bond was determined for the first time in the molecular structure. This structural motif was further analyzed by temperature‐dependent NMR studies: In solution at room temperature the coordinative bond fluctuates, while it can be frozen at low temperatures. Preliminary reactivity studies revealed a reduced reactivity of the copper(I) moiety towards dioxygen. The results adumbrate why nature is avoiding metal porphyrin‐π‐bonds by fixing reactive metal centers in a predetermined distance to each other within multimetallic enzymatic reaction centers.

Coligand modulated oxidative O-demethylation of a methyl ether appended tetradentate N-ligand in Co(ii) complexes

Two Co(ii) complexes of the formula CoL^OMeX₂ (X = Cl^- (1a); X = I^- (1b)), where L^OMe is 2-methoxy-N,N-bis(pyridin-2-ylmethyl) aniline, were synthesized and their structure, spectra and reactivity were studied. Upon oxidation of 1a and 1b, the ligand L^OMe undergoes demethylation at the metal centre resulting in the formation of Co(iii) complexes with modified phenoxide ligands. This is the very first example of oxidative O-demethylation reported at a Co(ii) centre. The oxidative behaviour exhibits a striking dependence on the nature of coligands coordinated to the metal centre. The Co(ii) complex 1a with stronger chloro coligands requires a strong oxidising agent like t-BuOOH for oxidative demethylation and the subsequent formation of a mononuclear Co(iii) complex with a demethylated ligand, CoL^O-Cl₂ (2). On the other hand, complex 1b with weaker iodo coligands undergoes oxidation in the presence of the weak oxidant O₂ to form a dihydroxo bridged binuclear Co(iii) complex [Co₂(L^O-)₂(OH)₂]²⁺ (3) with modified phenoxide ligands. The oxidation of 1b to 3 is monitored and the intermediate Co(ii) iodo aqua complex [CoL^OMeI(H₂O)]⁺ and Co(ii) diaqua complex [CoL^OMe(H₂O)₂]²⁺ are isolated and characterised.

Unprecedented direct cupric-superoxo conversion to a bis-μ-oxo dicopper(III) complex and resulting oxidative activity

Investigations of small molecule copper-dioxygen chemistry can and have provided fundamental insights into enzymatic processes (e.g., copper metalloenzyme dioxygen binding geometries and their associated spectroscopy and substrate reactivity). Strategically designing copper-binding ligands has allowed for insight into properties that favor specific (di)copper-dioxygen species. Herein, the tetradentate tripodal TMPA-based ligand (TMPA = tris((2-pyridyl)methyl)amine) possessing a methoxy moiety in the 6-pyridyl position on one arm (OCH3TMPA) was investigated. This system allows for a trigonal bipyramidal copper(II) geometry as shown by the UV-vis and EPR spectra of the cupric complex [(OCH3TMPA)CuII(OH2)](ClO4)2. Cyclic voltammetry experiments determined the reduction potential of this copper(II) species to be -0.35 V vs. Fc+/0 in acetonitrile, similar to other TMPA-derivatives bearing sterically bulky 6-pyridyl substituents. The copper-dioxygen reactivity is also analogous to these TMPA-derivatives, affording a bis-μ-oxo dicopper(III) complex, [{(OCH3TMPA)CuIII}2(O2-)2]2+, upon oxygenation of the copper(I) complex [(OCH3TMPA)CuI](B(C6F5)4) at cryogenic temperatures in 2-methyltetrahydrofuran. This highly reactive intermediate is capable of oxidizing phenolic substrates through a net hydrogen atom abstraction. However, after bubbling of the precursor copper(I) complex with dioxygen at very low temperatures (-135 °C), a cupric superoxide species, [(OCH3TMPA)CuII(O2 •-)]+, is initially formed before slowly converting to [{(OCH3TMPA)CuIII}2(O2-)2]2+. This appears to be the first instance of the direct conversion of a cupric superoxide to a bis-μ-oxo dicopper(III) species in copper(I)-dioxygen chemistry.

N-Doped carbon nanofibers derived from bacterial cellulose as an excellent metal-free catalyst for selective oxidation of arylalkanes

N-Doped carbon nanofibers derived from one-step pyrolysis of low-cost bacterial cellulose with the assistance of urea were an excellent metal-free carbocatalyst for selective oxidation of arylalkanes.

High-valence CuIICuIII species in action: demonstration of aliphatic C–H bond activation at room temperature

The electrochemically generated Cu^IICu^III mixed-valence species promotes activation of strong aliphatic C–H bonds (i.e. toluene), turning from stoichiometric to catalytic upon addition of a base.

Pd-Catalyzed Aerobic Oxidation Reactions: Strategies To Increase Catalyst Lifetimes

The palladium complex [(neocuproine)Pd(μ-OAc)]₂[OTf]₂ (1, neocuproine = 2,9-dimethyl-1,10-phenanthroline) is an effective catalyst precursor for the selective oxidation of primary and secondary alcohols, vicinal diols, polyols, and carbohydrates. Both air and benzoquinone can be used as terminal oxidants, but aerobic oxidations are accompanied by oxidative degradation of the neocuproine ligand, thus necessitating high Pd loadings. Several strategies to improve aerobic catalyst lifetimes were devised, guided by mechanistic studies of catalyst deactivation. These studies implicate a radical autoxidation mechanism initiated by H atom abstraction from the neocuproine ligand. Ligand modifications designed to retard H atom abstractions as well as the addition of sacrificial H atom donors increase catalyst lifetimes and lead to higher turnover numbers (TON) under aerobic conditions. Additional investigations revealed that the addition of benzylic hydroperoxides or styrene leads to significant increases in TON as well. Mechanistic studies suggest that benzylic hydroperoxides function as H atom donors and that styrene is effective at intercepting Pd hydrides. These strategies enabled the selective aerobic oxidation of polyols on preparative scales using as little as 0.25 mol % of Pd, a major improvement over previous work.

Copper(i) complexes based on ligand systems with two different binding sites: synthesis, structures and reaction with O2

The synthesis of the ligand systems L1 and L2 with two different N₃-binding sites linked through a dibenzofuran spacer and their coordination properties towards a variety of Cu^I precursors are reported. The reaction of L1 with copper halides leads to the formation of a bimetallic species [(L1)(Cu^ICl)₂] (1), and metallodimers [((L1)(Cu^IX)₂)₂(μ-(Cu)(μ-X)₂)] (2: X = Br, 3: X = I) in which two dicopper complexes are bridged by a (μ-(Cu)(μ-X)₂)-moiety whereas L2 reacts with copper chloride to afford {[Cu(L2)Cl₂]}_n (8). Furthermore, starting from L1 in combination with copper(i) salts of weakly coordinating anions the dicopper complexes [(L1)(Cu^I(NCCH₃))₂](BF₄)₂ (4), [(L1)(Cu^I(NCCH₃))(Cu(Y))](Y) (5: Y = OTf, 6: Y = ClO₄) and [(L1)(Cu(dppe))](PF₆)₂ (7) were isolated, and employing L2, the complexes [(L2)(Cu^I(NCCH₃))₂](Z)₂ (9: Z = PF₆, 10: Z = OTf) and [(L2)(Cu(dppe))](PF₆)₂ (11) were obtained. Complexes 4-6 as well as 9 and 10 react rapidly with O₂ to form metastable O₂ adducts in acetone at -90 °C, where O₂ is bound between the two copper centers within one dicopper molecule, as evidenced by UV/Vis spectroscopy, kinetic investigations, Raman spectroscopy and studies with ligands containing the isolated donor sites. The reactivity of the O₂ adducts towards selected substrates was also investigated, showing their ability to act as electrophiles as well as nucleophiles.

Structure and properties of a novel staircase-like decanuclear [CuII10] cluster supported by carbonate and carboxylate bridges

A novel staircase-like decanuclear copper(ii) cluster composed of a pair of [CuII5] pentameric units that are linked together exclusively by two μ₂:η²:η¹carbonate ligands is reported. The cluster also shows a rare μ₃:η²:η¹:η¹bridging coordination mode of benzoate groups of the ligand.

Copper-mediated reduction of azides under seemingly oxidising conditions: catalytic and computational studies

The reduction of aryl azides in the presence of water and air and without an obvious reducing agent is reported.

Dinuclear cobalt(II) complexes with double phosphate ester bridges and tetradentate ligands having anisole or quinoline appendages

Phosphate esters provide a rigid and stable polymeric backbone in nucleic acids. Metal complexes with phosphate ester groups have been synthesized as structural and spectroscopic models of phosphate-containing enzymes. Dinucleating ligands are used extensively to synthesize model complexes since they provide the support required to stabilize such complexes. The crystal structures of two dinuclear CoII complexes, namely bis(μ-diphenyl phosphato-κ2 O:O′)bis({2-methoxy-N,N-bis[(pyridin-2-yl)methyl]aniline-κ4 N,N′,N′′,O}cobalt(II)) bis(perchlorate), [Co(C12H10O4P)2(C19H19N3O)2](ClO4)2, and bis(μ-diphenyl phosphato-κ2 O:O′)bis({N,N-bis[(pyridin-2-yl)methyl]quinolin-8-amine-κ4 N,N′,N′′,O}cobalt(II)) bis(perchlorate), [Co(C12H10O4P)2(C21H18N4)2](ClO4)2, with tetradentate 2-methoxy-N,N-bis[(pyridin-2-yl)methyl]aniline (L 1) and N,N-bis[(pyridin-2-yl)methyl]quinolin-8-amine (L 2) ligands are reported. The complexes have similar structures, with distorted octahedral geometries around the metal centres. Both are centrosymmetric (Z′ = 0.5), with the CoII centres doubly bridged by diphenyl phosphate ester groups. A number of aromatic–aromatic interactions are present and differ between the two complexes as the anisole group in L 1 is replaced by a quinoline group in L 2. A detailed study of these interactions is presented.

Specific Enhancement of Catalytic Activity by a Dicopper Core: Selective Hydroxylation of Benzene to Phenol with Hydrogen Peroxide

A dicopper(II) complex, stabilized by the bis(tpa) ligand 1,2-bis[2-[bis(2-pyridylmethyl)aminomethyl]-6-pyridyl]ethane (6-hpa), [Cu₂ (μ-OH)(6-hpa)]³⁺ , was synthesized and structurally characterized. This complex catalyzed selective hydroxylation of benzene to phenol using H₂ O₂ , thus attaining large turnover numbers (TONs) and high H₂ O₂ efficiency. The TON after 40 hours for the phenol production exceeded 12000 in MeCN at 50 °C under N₂ , the highest value reported for benzene hydroxylation with H₂ O₂ catalyzed by homogeneous complexes. At 22 % benzene conversion, phenol (95.2 %) and p-benzoquinone (4.8 %) were produced. The mechanism of H₂ O₂ activation and benzene hydroxylation is proposed.

Copper-Oxygen Complexes Revisited: Structures, Spectroscopy, and Reactivity

A longstanding research goal has been to understand the nature and role of copper-oxygen intermediates within copper-containing enzymes and abiological catalysts. Synthetic chemistry has played a pivotal role in highlighting the viability of proposed intermediates and expanding the library of known copper-oxygen cores. In addition to the number of new complexes that have been synthesized since the previous reviews on this topic in this journal (Mirica, L. M.; Ottenwaelder, X.; Stack, T. D. P. Chem. Rev. 2004, 104, 1013-1046 and Lewis, E. A.; Tolman, W. B. Chem. Rev. 2004, 104, 1047-1076), the field has seen significant expansion in the (1) range of cores synthesized and characterized, (2) amount of mechanistic work performed, particularly in the area of organic substrate oxidation, and (3) use of computational methods for both the corroboration and prediction of proposed intermediates. The scope of this review has been limited to well-characterized examples of copper-oxygen species but seeks to provide a thorough picture of the spectroscopic characteristics and reactivity trends of the copper-oxygen cores discussed.

Experimental and mechanistic insights into copper(ii)–dioxygen catalyzed oxidative N-dealkylation of N-(2-pyridylmethyl)phenylamine and its derivatives

An efficient Cu(ii)/O₂ catalytic system was experimentally explored for the N-dealkylation of PyCH₂NHPh and its derivatives via C–H bond activation.

Accessing Drug Metabolites via Transition-Metal Catalyzed C-H Oxidation: The Liver as Synthetic Inspiration

Can classical and modern chemical C-H oxidation reactions complement biotransformation in the synthesis of drug metabolites? We have surveyed the literature in an effort to try to answer this important question of major practical significance in the pharmaceutical industry. Drug metabolites are required throughout all phases of the drug discovery and development process; however, their synthesis is still an unsolved problem. This Review, not intended to be comprehensive or historical, highlights relevant applications of chemical C-H oxidation reactions, electrochemistry and microfluidic technologies to drug templates in order to access drug metabolites, and also highlights promising reactions to this end. Where possible or appropriate, the contrast with biotransformation is drawn. In doing so, we have tried to identify gaps where they exist in the hope to spur further activity in this very important research area.