Degree of Rate Control: How Much the Energies of Intermediates and Transition States Control Rates

Computational Insights on Structural Sensitivity of Cobalt in NO Electroreduction to Ammonia and Hydroxylamine

It has been reported that it was selective to produce ammonia on metallic cobalt in the electrocatalytic nitric oxide reduction reaction (eNORR), where hexagonal close-packed (hcp) cobalt outperforms face-centered cubic (fcc) cobalt. However, hydroxylamine is more selectively produced on a cobalt single-atom catalyst (Co-SAC). Herein, we uncover the structural sensitivity over hcp-Co, fcc-Co, and Co-SAC in eNORR by employing a recently developed constant potential simulation method and microkinetic modeling. It was found that the superior activity for ammonia production on hcp-Co can be attributed to its facile electron and proton transfer and a stronger lateral suppression effect from NO* over fcc-Co. The exceptional hydroxylamine selectivity on Co-SAC is due to the modified electronic structure, namely, a positively charged active center. It was found that it is more favorable to produce NOH* over hcp-Co and fcc-Co, while HNO* is more preferable on Co-SAC, which are firmly correlated with the vertical and strong NO adsorption on the former and the moderate adsorption on the latter. In other words, a key factor for selectivity control is the first step of NO* protonation. Therefore, the local structure and electronic structure of the catalysts can be critical in regulating the activity and selectivity in eNORR.

Efficiency Conceptualization Model: A Theoretical Method for Predicting the Turnover of Catalysts

In recent times, the theoretical prediction of catalytic efficiency is of utmost urgency. With the advent of density functional theory (DFT), reliable computations can delineate a quantitative aspect of the study. To this state-of-the-art approach, valuable incorporation would be a tool that can acknowledge the efficiency of a catalyst. In the current work, we developed the efficiency conceptualization model (ECM) that utilizes the quantum mechanical tool to achieve efficiency in terms of turnover frequency (TOF). Twenty-six experimentally designed transition metal (TM) water oxidation catalysts were chosen under similar experimental conditions of temperature, pressure, and pH to execute the same. The computations conclude that the Fe-based [Fe(OTf)2(Me2Pytacn)] (MWOC-17) is a highly active catalyst and, therefore, can endure for more time in the catalytic cycle. Our results conclude that the Ir-based catalysts [Cp*Ir(κ2-N,O)X] with MWOC-23: X=Cl; and MWOC-24: X=NO3 report the highest computed turnover numbers (TONs),τ c o m p u t e d T O N 0 ${\tau _{computed\;TON}^0 }$ of 406 and 490 against the highest experimental TONs,τ e x p e r i m e n t a l T O N ${\tau _{experimental\;TON} }$ of 1200 and 2000 respectively, whereas the Co-based [Co(12-TMC)]2+ (MWOC-19) has the lowest TONs (τ c o m p u t e d T O N 0 ${\tau _{computed\;TON}^0 }$ =19, τexperimental TON=16) among the chosen catalysts and thereby successful in corroborating the previous experimental results.

Bubble-water/catalyst triphase interface microenvironment accelerates photocatalytic OER via optimizing semi-hydrophobic OH radical

Photocatalytic water splitting (PWS) as the holy grail reaction for solar-to-chemical energy conversion is challenged by sluggish oxygen evolution reaction (OER) at water/catalyst interface. Experimental evidence interestingly shows that temperature can significantly accelerate OER, but the atomic-level mechanism remains elusive in both experiment and theory. In contrast to the traditional Arrhenius-type temperature dependence, we quantitatively prove for the first time that the temperature-induced interface microenvironment variation, particularly the formation of bubble-water/TiO2(110) triphase interface, has a drastic influence on optimizing the OER kinetics. We demonstrate that liquid-vapor coexistence state creates a disordered and loose hydrogen-bond network while preserving the proton transfer channel, which greatly facilitates the formation of semi-hydrophobic •OH radical and O-O coupling, thereby accelerating OER. Furthermore, we propose that adding a hydrophobic substance onto TiO2(110) can manipulate the local microenvironment to enhance OER without additional thermal energy input. This result could open new possibilities for PWS catalyst design.

Computational design of metal hydrides on a defective metal-organic framework HKUST-1 for ethylene dimerization

Catalytic ethylene dimerization to 1-butene is a crucial reaction in the chemical industry, as 1-butene is used for the production of most common plastics (e.g., polyethylene). With well-defined tuneable structures and unsaturated active sites, defective metal-organic frameworks have recently emerged as potential catalysts for ethylene dimerization. Herein, we computationally design a series of metal hydrides on defective HKUST-1 namely H-M-DHKUST-1 (M: Co, Ni, Cu, Ru, Rh and Pd), and subsequently assess their catalytic activity for ethylene dimerization by density functional theory calculations. Due to the antiferromagnetic behavior of dimeric metal-based clusters, we comprehensively investigate all possible multiplicity states on H-M-DHKUST-1 and observe multiplicity crossing. The ground-state reaction barriers for four elementary steps (initiation, C-C coupling, β-hydride elimination and 1-butene desorption) are rationalized and C-C coupling is revealed to be the rate-determining step on H-Co-, H-Ni-, H-Ru-, H-Rh- and H-Pd-DHKUST-1. The energy barrier for β-hydride elimination is found to be the lowest on H-Ru- and H-Rh-DHKUST-1, attributed to the weak stability of agostic arrangement; however, the energy barrier for 1-butene desorption is the highest on H-Rh-DHKUST-1. Among the designed H-M-DHKUST-1, Co- and Ni-based ones are predicted to exhibit the best overall catalytic performance. The mechanistic insights from this study may facilitate the development of new MOFs toward efficient ethylene dimerization and other industrially important reactions.

Design of MoS2 edge-anchored single-atom catalysts for propane dehydrogenation driven by DFT and microkinetic modeling

The design of efficient catalysts for direct propane dehydrogenation (PDH) to inhibit coke formation and deactivation of traditional Pt-based catalysts are challenging tasks. Herein, by exploiting the unique geometric feature and tunability of single atom catalysts (SACs), a wide range of 3d-5d transition metals anchored on the MoS2 edge in the single atom form (TM1-S4/edge) are comprehensively investigated for the PDH application by first-principles calculations, ab initio molecular dynamics (AIMD) simulations and microkinetic modeling. Five criteria are assessed in terms of the feasibility of preparation, practical stability, feasibility of recovery after air oxidation, activity and selectivity. We identified Ru1-S4/edge SAC as the most promising candidate with activity six times higher than that of the conventional Pt(111) catalyst. Interestingly, AIMD simulations show that the motif region of the highly reactive TM1-S4/edge SACs (such as Ru, Os, Rh, and Ir) exhibits a dynamic change, with a TM-coordinated S atom tending to flutter at reaction temperatures and return to its initial position when the species is adsorbed on TMs, thereby affecting the PDH activities. In addition to identifying the potential PDH catalyst from a practical application point of view, we believe that this study also provides a comprehensive picture for the theoretical screening of low-coordination single-atom catalysts.

Potential and electric double-layer effect in electrocatalytic urea synthesis

Electrochemical synthesis is a promising way for sustainable urea production, yet the exact mechanism has not been fully revealed. Herein, we explore the mechanism of electrochemical coupling of nitrite and carbon dioxide on Cu surfaces towards urea synthesis on the basis of a constant-potential method combined with an implicit solvent model. The working electrode potential, which has normally overlooked, is found influential on both the reaction mechanism and activity. The further computational study on the reaction pathways reveals that *CO-NH and *NH-CO-NH as the key intermediates. In addition, through the analysis of turnover frequencies under various potentials, pressures, and temperatures within a microkinetic model, we demonstrate that the activity increases with temperature, and the Cu(100) shows the highest efficiency towards urea synthesis among all three Cu surfaces. The electric double-layer capacitance also plays a key role in urea synthesis. Based on these findings, we propose two essential strategies to promote the efficiency of urea synthesis on Cu electrodes: increasing Cu(100) surface ratio and elevating the reaction temperature.

Substantial impact of surface charges on electrochemical reaction kinetics on S vacancies of MoS2 using grand-canonical iteration method

The surface charges of catalysts have intricate influences on the thermodynamics and kinetics of electrochemical reactions. Herein, we develop a grand-canonical iteration method based on density functional theory calculations to explore the effect of surface charges on reaction kinetics beyond the traditional Butler-Volmer picture. Using the hydrogen evolution reaction on S vacancies of MoS2 as an example, we show how to track the change of surface charge in a reaction and to analyze its influence on the kinetics. Protons adsorb on S vacancies in a tough and charge-insensitive water splitting manner, which explains the observed large Tafel slope. Grand-canonical calculations report an unanticipated surface charge-induced change of the desorption pathway from the Heyrovsky route to a Volmer-Tafel route. During an electrochemical reaction, a net electron inflow into the catalyst may bring two effects, i.e., stabilization of the canonical energy and destabilization of the charge-dependent grand-canonical part. On the contrary, a net outflow of electrons from the catalyst can reverse the two effects. This surface charge effect has substantial impacts on the overpotential and the Tafel slope. We suggest that the surface charge effect is universal for all electrochemical reactions and significant for those involving interfacial proton transfers.

Theoretical insight into the promotion effect of potassium additive on the water-gas shift reaction over low-coordinated Au catalysts

CONTEXT

How to elucidate the effect of alkali metal promoters on gold-catalyzed water-gas shift reaction intrinsically remains a challenging, because that the complex synergy effects such as strong metal-support interactions, interfacial effects, and charge transfer of supported metal catalysts makes people difficulty in the understanding the alkali promotion phenomenon in nature. Herein, we report a systematically study of whole water-gas shift reaction mechanism on pure and the K-modified defected-Au(211) (i.e., by removing one surface Au atom from perfect Au(211) and make one model with the Au-Au coordination number is six) by using the microkinetic modeling based on first principles. Our results indicate that the presence of K can increase the adsorption ability of oxygen-containing species via the attractive coulomb interaction, has no significant effect on the adsorption of H species, but inhibits the adsorption of CO due to the steric effect. K promoter stabilizes the water adsorption by ~0.3 eV, which results in one order increasing of whole reaction rate. Interestingly, the strong promotion effect of the K can be assigned to the significant direct space interaction between K and the adsorbate H2O* through the inducted electric field, which can be further confirmed by the posed negative electric field on the unpromoted D-Au(211). Microkinetic modeling results revealed that the carboxyl mechanism is the most likely to occur, redox mechanism is the next one, and the formate mechanism is the least likely to occur. For different kinds of alkali metal additives, the adsorption strength of water molecules gradually weakens from Li to Cs, but Na shows the best promoter behavior at the low temperature. By considering the effect of K contents on the reactivity of water-gas shift reaction, we found that the K with the medium coverage (~0.2~0.3 ML) has the strongest promoting effect. It is expected that the conclusion of this work can be extended to other WGSR catalytic systems like Cu(or Pt).

METHODS

All calculations were performed by using the plane-wave based periodic method implemented in Vienna ab initio simulation package (VASP, version 5.4.4), where the ionic cores are described by the projector augmented wave (PAW) method. The exchange and correlation energies were computed using the Perdew, Burke and Ernzerhof functional with the vdw correction (PBE-D3). The transition states (TSs) were searched using the climbing image nudged elastic band (CI-NEB) method. Some electronic structure properties like work function was predicated by the DS-PAW software. Microkinetic simulation was carried out using MKMCXX software.

Theoretical Investigation of the Electrochemical Oxidation of H2 and CO Fuels on a Ruddlesden-Popper SrLaFeO4-δ Anode

The electrochemical oxidation of H₂ and CO fuels have been investigated on the Ruddlesden-Popper layered perovskite SrLaFeO_4-δ (SLF) under anodic solid oxide fuel cell conditions using periodic density functional theory and microkinetic modeling techniques. Two distinct FeO₂-plane-terminated surface models differing in terms of the underlying rock salt layer (SrO or LaO) are used to identify the active site and limiting factors for the electro-oxidation of H₂, CO, and syngas fuels. Microkinetic modeling predicted an order of magnitude higher turnover frequency for the electro-oxidation of H₂ compared to CO for SLF at short-circuit conditions. The surface model with an underlying SrO layer was found to be more active with respect to H₂ oxidation than the LaO-based surface model. At an operating voltage of less than 0.7 V, surface H₂O/CO₂ formation was found to be the key rate-limiting step, and the surface H₂O/CO₂ desorption was the key charge transfer step. In contrast, the bulk oxygen migration process was found to affect the overall rate at high cell voltage conditions above 0.9 V. In the presence of syngas fuel, the overall electrochemical activity is derived mainly from H₂ electro-oxidation and CO₂ is chemically shifted to CO via the reverse water-gas shift reaction. Substitutional doping of a surface Fe atom with Co, Ni, and Mn revealed that the H₂ electro-oxidation activity of FeO₂-plane terminated anodes with an underlying LaO rock salt layer can be improved with dopant introduction, with Co yielding a three orders of magnitude higher activity relative to the undoped LaO surface model. Constrained ab initio thermodynamic analysis furthermore suggested that the SLF anodes are resistant toward sulfur poisoning both in the presence and absence of dopants. Our findings reflect the role of various elements in controlling the fuel oxidation activity of SLF anodes that could aid the development of new Ruddlesden-Popper phase materials for fuel cell applications.

Lanthanide-doped MoS2 with enhanced oxygen reduction activity and biperiodic chemical trends

Molybdenum disulfide has broad applications in catalysis, optoelectronics, and solid lubrication, where lanthanide (Ln) doping can be used to tune its physicochemical properties. The reduction of oxygen is an electrochemical process important in determining fuel cell efficiency, or a possible environmental-degradation mechanism for nanodevices and coatings consisting of Ln-doped MoS₂. Here, by combining density-functional theory calculations and current-potential polarization curve simulations, we show that the dopant-induced high oxygen reduction activity at Ln-MoS₂/water interfaces scales as a biperiodic function of Ln type. A defect-state pairing mechanism, which selectively stabilizes the hydroxyl and hydroperoxyl adsorbates on Ln-MoS₂, is proposed for the activity enhancement, and the biperiodic chemical trend in activity is found originating from the similar trends in intraatomic 4f-5d6s orbital hybridization and interatomic Ln-S bonding. A generic orbital-chemistry mechanism is described for explaining the simultaneous biperiodic trends observed in many electronic, thermodynamic, and kinetic properties.

Promoted coke resistance of Ni by surface carbon for the dry reforming of methane

Dry reforming of methane (DRM) is an efficient process to transform methane and carbon dioxide to syngas. Nickel could show good catalytic activity for DRM, whereas the deactivation of nickel surfaces by the formation of inert carbon structures is inevitable. In this study, we carry out a detailed investigation of the evolution and catalytic performance of the carbon-covered surface structure on Ni(100) with a combined density functional theory and microkinetic modeling approach. The results suggest that the pristine Ni(100) surface is prone to carbon deposition and accumulation under reaction conditions. Further studies show that over this carbon-covered reconstructed Ni(100) surface, a carbon-based Mars-van-Krevelen mechanism would be favored, and the activity and coke resistance is promoted. This surface state and reaction mechanism were rarely reported before and would provide more insights into the DRM process under real reaction conditions and would help design more stable Ni catalysts.

Nature of Catalytic Behavior of Cobalt Oxides for CO2 Hydrogenation

Cobalt oxide (CoO _x ) catalysts are widely applied in CO₂ hydrogenation but suffer from structural evolution during the reaction. This paper describes the complicated structure-performance relationship under reaction conditions. An iterative approach was employed to simulate the reduction process with the help of neural network potential-accelerated molecular dynamics. Based on the reduced models of catalysts, a combined theoretical and experimental study has discovered that CoO(111) provides active sites to break C-O bonds for CH₄ production. The analysis of the reaction mechanism indicated that the C-O bond scission of *CH₂O species plays a key role in producing CH₄. The nature of dissociating C-O bonds is attributed to the stabilization of *O atoms after C-O bond cleavage and the weakening of C-O bond strength by surface-transferred electrons. This work may offer a paradigm to explore the origin of performance over metal oxides in heterogeneous catalysis.

First principles insights into the relative stability, electronic and catalytic properties of core-shell, Janus and mixed structural patterns for bimetallic Pd-X nano-alloys (X = Co, Ni, Cu, Rh, Ag, Ir, Pt, Au)

The three well-known orderings of the two constituting atomic species in a bimetallic nano-alloy - core-shell, Janus and mixed structural patterns - may be interconvertible depending on the synthesis conditions. Using first principles electronic structure calculations in the present work, we look for the microscopic origin for such structural transformation considering eight Pd-related bimetallic nano-alloys. Our analysis shows that it is the change in atom-atom covalency that is responsible for such structural transformation. Our study also reveals that the three patterns are distinctly identified in terms of total orbital hybridization. Finally, we have analyzed the trend in the relative catalytic activity for the three structures of each bimetallic nano-alloy using the d-band model. Our analysis indicates that the trend in the catalytic activity for the bimetallic Pd-X nano-alloys seems to be intermediate to those of the pristine Pd and Pt nano-clusters possessing similar structure and equal number of total atoms. Among the studied binary nano-alloys, the bimetallic Pd-Ni nano-alloy appears as the most suitable binary pair to develop a non-Pt catalyst.

A new adsorption energy-barrier relation and its application to CO2 hydrogenation to methanol over In2O3-supported metal catalysts

Herein, we report a new adsorption energy-barrier relation, the adsorbate-dependent barrier scaling (ADBS) relation, with which the catalytic activity of In₂O₃-supported metal catalysts for CO₂ hydrogenation to methanol is predicted. It is shown that Cu, Ga, NiPt and NiPd alloys exhibit high catalytic activity for CO₂ hydrogenation to methanol.

The Promoting Role of Ni on In2O3 for CO2 Hydrogenation to Methanol

Ni-promoted indium oxide (In₂O₃) is a promising catalyst for the selective hydrogenation of CO₂ to CH₃OH, but the nature of the active Ni sites remains unknown. By employing density functional theory and microkinetic modeling, we elucidate the promoting role of Ni in In₂O₃-catalyzed CO₂ hydrogenation. Three representative models have been investigated: (i) a single Ni atom doped in the In₂O₃(111) surface, (ii) a Ni atom adsorbed on In₂O₃(111), and (iii) a small cluster of eight Ni atoms adsorbed on In₂O₃(111). Genetic algorithms (GAs) are used to identify the optimum structure of the Ni₈ clusters on the In₂O₃ surface. Compared to the pristine In₂O₃(111) surface, the Ni₈-cluster model offers a lower overall barrier to oxygen vacancy formation, whereas, on both single-atom models, higher overall barriers are found. Microkinetic simulations reveal that only the supported Ni₈ cluster can lead to high methanol selectivity, whereas single Ni atoms either doped in or adsorbed on the In₂O₃ surface mainly catalyze CO formation. Hydride species obtained by facile H₂ dissociation on the Ni₈ cluster are involved in the hydrogenation of adsorbed CO₂ to formate intermediates and methanol. At higher temperatures, the decreasing hydride coverage shifts the selectivity to CO. On the Ni₈-cluster model, the formation of methane is inhibited by high barriers associated with either direct or H-assisted CO activation. A comparison with a smaller Ni₆ cluster also obtained with GAs exhibits similar barriers for key rate-limiting steps for the formation of CO, CH₄, and CH₃OH. Further microkinetic simulations show that this model also has appreciable selectivity to methanol at low temperatures. The formation of CO over single Ni atoms either doped in or adsorbed on the In₂O₃ surface takes place via a redox pathway involving the formation of oxygen vacancies and direct CO₂ dissociation.

Steering from electrochemical denitrification to ammonia synthesis

The removal of nitric oxide is an important environmental issue, as well as a necessary prerequisite for achieving high efficiency of CO₂ electroreduction. To this end, the electrocatalytic denitrification is a sustainable route. Herein, we employ reaction phase diagram to analyze the evolution of reaction mechanisms over varying catalysts and study the potential/pH effects over Pd and Cu. We find the low N₂ selectivity compared to N₂O production, consistent with a set of experiments, is limited fundamentally by two factors. The N₂OH* binding is relatively weak over transition metals, resulting in the low rate of as-produced N₂O* protonation. The strong correlation of OH* and O* binding energies limits the route of N₂O* dissociation. Although the experimental conditions of varying potential, pH and NO pressures can tune the selectivity slightly, which are insufficient to promote N₂ selectivity beyond N₂O and NH₃. A possible solution is to design catalysts with exceptions to break the scaling characters of energies. Alternatively, we propose a reverse route with the target of decentralized ammonia synthesis.

Fundamental Limit of Selectivity in Photocatalytic Denitrification over Titania

Although photocatalytic decomposition of NO (deNO) into N₂ and O₂ is low-cost and non-polluting, it has a low NO conversion efficiency. Establishing the activity and selectivity trend among active sites is an important base to explore and improve the deNO processes. Because the experimental performances are determined by the reaction rate, it is worthwhile to investigate the kinetic limiting steps calculated by comparative microkinetic modeling. We found that, without illumination, N₂ production is inactive over various TiO₂ surfaces/sites, but photogenerated holes can break the scaling relation of the dark condition by weakening O₂* adsorption, leading to a significant increase in deNO activity on defective titania surfaces. However, the low N₂ selectivity can be attributed to the small strength of N₂O adsorption. In contrast, the N₂ selectivity is enhanced in Ti-modified zeolite because of a stronger N₂O* adsorption. We demonstrate here that the reaction phase diagram analysis can clearly establish a global picture of reaction activity and selectivity over various catalytic sites. In combination with microkinetic modeling, it can effectively determine the kinetic limits, providing insights to improve the design of photocatalysts.

Tailoring of Active Sites from Single to Dual Atom Sites for Highly Efficient Electrocatalysis

Single atom catalysts (SACs) have been attracting extensive attention in electrocatalysis because of their unusual structure and extreme atom utilization, but the low metal loading and unified single site induced scaling relations may limit their activity and practical application. Tailoring of active sites at the atomic level is a sensible approach to break the existing limits in SACs. In this review, SACs were first discussed regarding carbon or non-carbon supports. Then, five tailoring strategies were elaborated toward improving the electrocatalytic activity of SACs, namely strain engineering, spin-state tuning engineering, axial functionalization engineering, ligand engineering, and porosity engineering, so as to optimize the electronic state of active sites, tune d orbitals of transition metals, adjust adsorption strength of intermediates, enhance electron transfer, and elevate mass transport efficiency. Afterward, from the angle of inducing electron redistribution and optimizing the adsorption nature of active centers, the synergistic effect from adjacent atoms and recent advances in tailoring strategies on active sites with binuclear configuration which include simple, homonuclear, and heteronuclear dual atom catalysts (DACs) were summarized. Finally, a summary and some perspectives for achieving efficient and sustainable electrocatalysis were presented based on tailoring strategies, design of active sites, and in situ characterization.

Experimental and Theoretical Studies of Ultrafine Pd-Based Biochar Catalyst for Dehydrogenation of Formic Acid and Application of In Situ Hydrogenation

In this work, a novel "foaming" strategy uses sodium bicarbonate (NaHCO₃) and ammonium oxalate ((NH₄)₂C₂O₄) as the foaming agent, turning biomass-derived carboxymethyl cellulose (CMC) into N-doped porous carbon. Highly active palladium nanoparticles (Pd NPs) immobilized on nitrogen-doped porous carbon (Pd@MC(2)-P) are produced through a phosphate-mediation approach. The phosphoric acid (H₃PO₄) becomes the key to the synthesis of highly dispersed ultrafine Pd NPs on active Pd-cluster-edge (the edge of the Pd-cluster-100 and Pd-cluster-111 surfaces). The Pd@MC(2)-P exhibits high activity for formic acid (FA) dehydrogenation with an initial TOF_g of 971 h^-1 at room temperature. The subsequent hydrogenation of phenol using FA as an in situ hydrogen source on Pd@MC(2)-P and the highly efficient hydrogenation of phenol to cyclohexanone reaches more than 90% selectivity and 80% conversion. Density functional theory (DFT) calculations reveal that the reduced H poisoning and more exposed (100) surface over Pd nanoparticles are the keys to the Pd nanoparticles' high activity.

The influence of doping amount on the catalytic oxidation of formaldehyde by Mn-CeO2 mixed oxide catalyst: A combination of DFT and microkinetic study

Formaldehyde (HCHO) is a major environmental pollutant. The Mn-doped CeO₂ catalyst has good catalytic performance for the oxidation of HCHO. The catalytic activity can be effectively tuned by changing the amount of metal doping. In this paper, density functional theory combined with micro-kinetic analysis are employed to provide a molecular level understanding to such effects. The CeO₂(111) surface with different Mn doping content was used to study the oxidation mechanism of HCHO. Highly dispersed Mn doped ceria was dominant at low content of Mn. While with the increase of Mn doping, Mn begins to accumulate on the CeO₂(111) surface. It is not conducive to the breaking of C-H bonds, the generation of oxygen vacancies and the adsorption of active oxygen species. Therefore, the low-content Mn-doped CeO₂ catalyst has higher catalytic oxidation activity of HCHO. The present contribution is useful for further optimization of Mn-CeO₂ catalysts towards HCHO oxidation.

Mechanistic insights into acid-affected hydrogenolysis of glycerol to 1,3-propanediol over an Ir-Re/SiO2 catalyst

Glycerol hydrogenolysis to 1,3-propanediol is identified to follow the dehydration-hydrogenation pathway with the rate-determining step (RDS) of H* + OH* → H₂O* over an IrRe catalyst. The positive effects of solid acids are elucidated to originate from the reduced energy barrier of the RDS by H protons, while the negative ones of liquid acids are from excessively strong adsorption of anions.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

CO 2 Hydrogenation to Methanol over Cd 4 /TiO 2 Catalyst: Insight into Multifunctional Interface

Supported metal catalysts have shown to be efficient for CO₂ conversion due to their multifunctionality and high stability. Herein, we have combined density functional theory calculations with microkinetic modeling to investigate the catalytic reaction mechanisms of CO₂ hydrogenation to CH₃OH over a recently reported catalyst of Cd₄/TiO₂. Calculations reveal that the metal‐oxide interface is the active center for CO₂ hydrogenation and methanol formation via the formate pathway dominates over the reverse water‐gas shift (RWGS) pathway. Microkinetic modeling demonstrated that formate species on the surface of Cd₄/TiO₂ is the relevant intermediate for the production of CH₃OH, and CH₂O^# formation is the rate‐determining step. These findings demonstrate the crucial role of the Cd‐TiO₂ interface for controlling the CO₂ reduction reactivity and CH₃OH selectivity.

Computational Scaling Relationships Predict Experimental Activity and Rate-Limiting Behavior in Homogeneous Water Oxidation

While computational screening with first-principles density functional theory (DFT) is essential for evaluating candidate catalysts, limitations in accuracy typically prevent the prediction of experimentally relevant activities. Exemplary of these challenges are homogeneous water oxidation catalysts (WOCs) where differences in experimental conditions or small changes in ligand structure can alter rate constants by over an order of magnitude. Here, we compute mechanistically relevant electronic and energetic properties for 19 mononuclear Ru transition-metal complexes (TMCs) from three experimental water oxidation catalysis studies. We discover that 15 of these TMCs have experimental activities that correlate with a single property, the ionization potential of the Ru(II)-O₂ catalytic intermediate. This scaling parameter allows the quantitative understanding of activity trends and provides insight into the rate-limiting behavior. We use this approach to rationalize differences in activity with different experimental conditions, and we qualitatively analyze the source of distinct behavior for different electronic states in the other four catalysts. Comparison to closely related single-atom catalysts and modified WOCs enables rationalization of the source of rate enhancement in these WOCs.

Trimethyloxonium ion – a zeolite confined mobile and efficient methyl carrier at low temperatures: a DFT study coupled with microkinetic analysis

The reaction network of ethene methylation over H-ZSM-5, including methanol dehydration, ethene methylation, and C3H7+ conversion, is investigated by employing a multiscale approach combining DFT calculations and microkinetic modeling.

Micro-kinetic Description of Electrocatalytic Reactions: The Role of Self-organized Phenomena

In this perspective we proposed a workflow for the construction of micro-kinetic models that consists of at least four stages, starting with information gathering that allows proposing possible reaction mechanisms....