Helical Vesicles, Segmented Semivesicles, and Noncircular Bilayer Sheets from Solution-State Self-Assembly of ABC Miktoarm Star Terpolymers

pH-induced morphological transition of aggregates formed by miktoarm star polymers in dilute solution: a mesoscopic simulation study

The self-assembly of miktoarm star polymers μ-A i (B(D)) j C k in a neutral solution and the pH-responsive behaviors of vesicles and spherical micelles in an acidic solution have been investigated by DPD simulation. The results show that the self-assembled morphologies can be regulated by the lengths of pH-responsive arm B and hydrophilic arm C, leading to the formation of vesicles, discoidal micelles, and spherical micelles in a neutral solution. The dynamic evolution pathways of vesicles and spherical micelles are categorized into three stages: nucleation, coalescence, and growth. Subsequently, the pH-responsive behaviors of vesicles and spherical micelles have been explored by tuning the protonation degree of pH-responsive arm B. The vesicles evolves from nanodisks to nanosheets, then to nanoribbons, as the protonation degree increases, corresponding to a decrease in pH value, while the spherical micelles undergoes a transition into worm-like micelles, nanosheets, and nanoribbons. Notably, the electrostatic interaction leads the counterions to form a regular hexagonal pattern in nanosheets, while an alternative distribution of charged beads has been observed in nanoribbons. Furthermore, the role of the electrostatic interaction in the morphological transition has been elucidated through the analysis of the distribution of positive and negative charges, as well as the electrostatic potential for associates.

Core-shell particle formation via Co-assembly of AB diblock copolymers and nanoparticles in 3D soft confinement

Core-shell particle formation via co-assembly of AB diblock copolymers and nanoparticles in 3D soft confinement was studied using a simulated annealing method. Several sequences of soft confinement-induced core-shell particles were predicted as functions of the volume fraction of the nanoparticle to core-shell particles, the incompatibility between blocks, the volume fractions of A-blocks, the chain length of AB diblocks, the eccentricity of the nanoparticle, and the initial concentration of copolymers. Simulation results demonstrate that those factors are able to tune the morphology of the core-shell particles precisely. Calculated data indicate that the copolymer chain was located between a hard confinement wall composed of the nanoparticle and a soft confinement wall composed of solvents, and the arrangement direction of the copolymer chains was in a competitive equilibrium between the two. We anticipate that this work will be helpful and instructive for the preparation of polymer shells with different structures and shapes, as well as the study of self-assembly morphology of copolymers in a complex confinement systems.

Shell with Striped, Helical, and Bipolar Lamellae Structures from Soft Confinement-Induced Self-Assembly of AB Diblock Copolymers on a Nanocylinder

The soft confinement-induced self-assembly of AB diblock copolymers on a nanocylinder is studied via a simulated annealing method. The formation of multiple copolymer shells was predicted by varying the interfacial interaction, the size of confinement, and the height and diameter of the nanocylinder. The competition between solvent repulsion and nanocylinder attraction determined the degree of encapsulation of the copolymer shell. The formation of a helical copolymer shell was induced by the maximization of conformational entropy. The preferential distribution position of copolymers on anisotropic nanocylinder surfaces was induced by interfacial energy minimization. Our study contributes to the understanding of the formation mechanism of the helical structure in block copolymer aggregates and the fabrication of copolymer shells with predesigned morphologies.

The mechanism underlying the transitions between stripes, helices, and stacked toroids in the cylindrical shell formed by AB diblock copolymers on a long nanocylinder

The self-assembly of block copolymers on nanocylinders has attracted a lot of interest due to its potential application in biomedicine and other fields. In this study, the self-assembly phase behavior of AB diblock copolymers on long nanocylinders in soft confinement has been studied by using a simulated annealing method. A square phase diagram of the morphology was constructed by increasing the number of chains of copolymers (cn) and the cylindrical diameter (D). As a result, morphological transitions from striped to helical and axially stacked toroids, as well as reversible transitions, started to appear. By analyzing the chain packing in a fan-shaped region and calculating the mean-square end-to-end distance (DEE2) of the copolymers and number of AB contacts, both types of transitions were found to be driven by the competition between conformational entropy and AB interfacial energy. The number of stripes increased and the helical angle decreased with the increase in cylinder diameter. The chirality of the helix was found to be random.

Modeling the Phase Equilibria of Associating Polymers in Porous Media with Respect to Chromatographic Applications

Associating copolymers self-assemble during their passage through a liquid chromatography (LC) column, and the elution differs from that of common non-associating polymers. This computational study aims at elucidating the mechanism of their unique and intricate chromatographic behavior. We focused on amphiphilic diblock copolymers in selective solvents, performed the Monte Carlo (MC) simulations of their partitioning between a bulk solvent (mobile phase) and a cylindrical pore (stationary phase), and investigated the concentration dependences of the partition coefficient and of other functions describing the phase behavior. The observed abruptly changing concentration dependences of the effective partition coefficient demonstrate the significant impact of the association of copolymers with their partitioning between the two phases. The performed simulations reveal the intricate interplay of the entropy-driven and the enthalpy-driven processes, elucidate at the molecular level how the self-assembly affects the chromatographic behavior, and provide useful hints for the analysis of experimental elution curves of associating polymers.

Self-Assembly of Miktoarm Star Polyelectrolytes in Solutions with Various Ionic Strengths

We studied the self-assembly of miktoarm star polyelectrolytes with different numbers of arms in solutions with various ionic strengths using coarse-grained molecular dynamic simulations. Spherical micelles are obtained for star polyelectrolytes with fewer arms, whereas wormlike clusters are obtained for star polyelectrolytes with more arms at a low ionic strength environment, with hydrophilic arms showing a stretched conformation. The number of clusters shows an overall decreasing tendency with increasing the number of arms in star polyelectrolytes due to strong electrostatic coupling between polycations and polyanions. The formation of wormlike clusters follows an overall stepwise pathway with an intermittent association-dissociation process for star polyelectrolytes with weak electrostatic coupling. These computational results can provide relevant physical insights to understand the self-assembly mechanism of star polyelectrolytes in solvents with various ionic strengths and to design star polyelectrolytes with functional groups that can fine-tune self-assembled structures for specific applications.

Self-assembly of miktoarm palm tree-like star copolymers in a selective solvent

Amphiphilic miktoarm star copolymers with one long solvophobic arm (a "stem") and several short solvophilic arms (the "leaves") were studied in a selective solvent using mesoscopic computer simulations. The conventional morphologies (spherical, cylindrical and vesicular) as well as the mixed ones were obtained. However, the resulting diagram of states appeared to be different from the diagram of the linear diblock copolymer with the analogous composition. Namely, the increase of the number of leaves at fixed solvophobic-solvophilic ratio leads to the transition from the vesicles to the cylinders, while the latter ones eventually transform into spherical micelles in the case of highly branched copolymers. The observed effect appears due to the increase of the interfacial area between the collapsed and swollen blocks per single macromolecule. In turn, the increase of the solvent selectivity shifts the stability region of the cylindrical micelles to the region of more symmetric copolymer composition. Meanwhile, the compatibility between the blocks has a weak effect on the resulting morphology. Finally, it was found that the increase in the number of leaves and the simultaneous decrease in their length results in the localization of higher amount of solvophilic segments near the core-solvent interface, which in the case of cylindrical micelles significantly affects the shape of the aggregates making them thinner and longer.

A simulation study of the self-assembly of ABC star terpolymers confined between two parallel surfaces

The phase behavior of ABC star terpolymers confined between two identical parallel surfaces is systematically studied using a simulated annealing method. Several phase diagrams are constructed for systems with different bulk phases or with different interfacial interaction strength ratios in the space of surface distance (D) and surface preference for different arms, or in the space of D and the arm-length ratio x. Phases, including tiling patterns [6.6.6], [8.8.4], [8.6.6; 8.6.4], [8.6.6; 8.6.4; 10.6.6; 10.6.4] and hierarchical lamellar structures of lamella + cylinders and lamella + rods, are identified both in the bulk and in the films. Our results suggest that the self-assembled structure of a phase is largely controlled by x, while an increase of the interfacial interaction strength ratio shifts the x-window for each phase to the smaller x side. The orientation of a confined phase depends on the "effective surface preference" which is a combined effect of the interfacial interaction strength ratio, the surface preference, and the entropic preference. In the case of neutral or weak "effective surface preference", phases with a perpendicular orientation are usually observed, while in the case of strong "effective surface preference" phases with a perpendicular orientation or also with outermost wetting-layers can be frequently observed under some circumstances.

Controlling the chirality and number of strands of helices self-assembled from achiral block copolymers confined inside a nanopore: a simulation study

Achiral block copolymers can self-assemble into helical structures when confined inside a cylindrical nanopore. However, controlling the chirality and the number of strands of helices is challenging. We present our simulation results of the influence of a chiral patch added to the confining nanopore on the structures and chirality of helices self-assembled from achiral cylinder-forming diblock copolymers under the confinement. Our results indicate that, when the designed patch is of proper geometry, it can induce the formation of helical structures and exhibit good control over their chirality. The bottom surface of the patch can induce the formation of a characteristic local structure near and parallel to it. It is the characteristic local structure that directs the formation of helices and of their chirality consistent with that of the patch. A large patch angle or the top/bottom surface of a weakly selective pore promotes the formation of double-helices compared to single-helices by enlarging the pitch of the helices near the patch or through the entropic attraction of the top surface of the pore to the minority blocks.

Open and Closed Layered Nanostructures with Sub-10 nm Periodicity Self-Assembled from Hydrophilic [60]Fullerene-Based Giant Surfactants

Giant surfactants have been identified as good candidates to produce sub-10 nm elaborate nanostructures, which could potentially realize complex functions in nanofabrication fields. Our theoretical simulation demonstrates the formation of open layered (pupa-like micelles) and closed layered (onion-like micelles) nanostructures, self-assembled from giant surfactants with comparably sized hydrophilic heads tethered by oligomers in solution. Directed by these simulation results, we synthesized giant surfactants consisting of hydrophilic [60]fullerene heads and oligostyrene (OS₇) tails and produced the predicted nanostructures with periods of 9.5, 8.3, and 7.5 nm, experimentally. Adjusting the polarity of the solvent and corresponding concentration changed the nanostructures from onion-like micelles with closed layers to pupa-like micelles with open layers. The different morphologies and periods were caused by solvent inclusion and the overlap of OS chains. The above layered nanostructures remained stable after annealing at 120 °C. This work provides insights that computer simulation can play an important role in assisting the design and construction of complicated nanostructures in giant surfactant systems.

Formation and Regulation of Multicompartment Vesicles from Cyclic Diblock Copolymer Solutions: A Simulation Study

The self-assembly of a cyclic AB copolymer system with relatively long A blocks and short B blocks in B-selective solvents is investigated using a simulated annealing method. By investigating the effect of the lengths and solubilities of A and B blocks (N A and N B, εAS and εBS), the incompatibility between A and B blocks (εAB), as well as the polymer concentration (C p) and the conditions for the formation of multicompartment vesicles in cyclic diblock copolymer solutions, is predicted. The phase diagrams in terms of N B, εAS, and C p are constructed. The mechanism of the morphological transition is elucidated. It is shown that for cyclic copolymers the change in the above factors relating to the polymer and solvent properties all can lead to the transition from simple vesicles to multicompartment vesicles, but two different transition mechanisms are revealed. In addition, our simulations demonstrate that the self-assembly of cyclic copolymers could provide a powerful strategy for regulating the compartment number and the wall thickness of the multicompartment vesicles by adjusting the block solubilities and block lengths, respectively. These findings will facilitate the application of multicompartment architectures in cell mimicry, drug delivery, and nanoreactors.

Self-assembly of phospholipid molecules in solutions under shear flows: Microstructures and phase diagrams

Shear-induced microstructures and their phase diagrams were investigated for phospholipid molecules in aqueous solution by dissipative particle dynamic simulation. Self-assembled microstructures, including spherical and cylindrical micelles, spherical vesicles, lamellae, undulated lamellae, perforated lamellae, and continuous networks, were observed under various shear flows and phospholipid concentrations, where the spatial inhomogeneity and symmetry were analysed. A series of phase diagrams were constructed based on the chain lengths under various phospholipid concentrations. The phase distributions showed that the structures with spherical symmetry could be shear-induced to structures with cylindrical symmetry in the dilute solutions. In the semi-concentrated solutions, the lamellae were located in most spaces under zero shear flows, which could be shear-induced into undulated lamellae and then into cylindrical micelles. For the concentrated solutions, the strong shear flows oriented the directions of multilayer lamellae and phase transitions appeared between several cylindrical network structures. These observations on shear-induced microstructures and their distributions revealed a promising approach that could be used to design bio-microstructures based on phospholipid molecules under shear flows.

Formation of homochiral helical nanostructures in diblock copolymers under the confinement of nanopores

The control of the homochirality of helical structures formed in achiral systems is of great interest as it is helpful for understanding the origin of homochirality in life.

Intramolecular Noncovalent Carbon Bonding Interaction Stabilizes the cis Conformation in Acylhydrazones

Noncovalent carbon bonding, a recently explored σ-hole interaction, was hitherto supposed to be a weak and structure-guided interaction. Here, its role in the intramolecular stabilization of the cis conformation of the amide moiety in acylhydrazones is described. The calculations reveal an electron donation from the lone pair of the nitrogen atom to the empty antibonding C-N orbital [LP(N)→BD*(C-N)] with a concomitant stabilization energy of E⁽²⁾ =1.2 kcal mol^-1 .

Confined co-assembly of AB/BC diblock copolymer blends under 3D soft confinement

Compared to synthesizing a new block copolymer, blending of two types of block copolymers or a block copolymer and a homopolymer is a simple yet effective approach to create new self-assembled nanostructures. Here, we apply Monte Carlo (MC) simulations to mimic the co-assembly of AB/BC diblock copolymer blends within a three-dimensional (3D) soft confined space, which corresponds to the co-assembly confined in an emulsion droplet in experiment. The confined co-assemblies of four types of block copolymer blends at different block ratios, i.e., A8B8/B8C8, A6B10/B10C6, A12B4/B4C12 and A12B4/B10C6, are investigated by MC simulations. The simulation results reveal that the ratio of different types of blocks and the polymer-solvent interactions between the different blocks and the solvent determine the final self-assembled nanostructures. By tailoring these two controlling parameters, we not only reproduced some classic nanostructures, i.e., pupa-, onion-, and bud-like particles, but also predicted some unconventional nanostructures, such as patch-, Janus-, peanut-, disc- and snowman-like particles via MC simulations.

Effect of solvophobicity on the phase behavior of linear ABC triblock copolymers in selective solvents: a Monte Carlo study

The microphase separation behavior of linear ABC triblock copolymers in A-selective solvents are studied using Monte Carlo simulation. The ABC triblock copolymer used in this study has a short solvophilic block A and two long solvophobic blocks B and C. The effects of the solvophobicity difference and the incompatibility between solvophobic blocks B and C on the micelle morphologies formed by linear ABC triblock copolymers are investigated, and phase diagrams as a function of the solvophobicity of blocks B and C are given at different repulsions between blocks B and C, respectively. A series of multicompartment micelles with distinct solvophobic parts is obtained, such as pupa-like multi-layered micelles, hamburger-like micelles and bumpy disks. Remarkably, when the solvophobicity of blocks B is much stronger than that of blocks C, a novel reverse core–shell–corona micelle with solvophilic blocks A located in the center of the micelle is obtained. Moreover, the results indicate that the competition between the effects of the incompatibility and solvophobicity difference between blocks B and C determines the microphase separation structures in the multicompartment micelles. These simulation results elucidate the mechanism of the formation of ABC triblock copolymer nanostructures and provide theoretical guidance for experimental studies.

The solvophobicity difference and incompatibility between different solvophobic blocks determine the overall shapes and micro-structures of micelles formed by linear ABC terpolymers.

Recent progress in the self-assembly of block copolymers confined in emulsion droplets

When the self-assembly of block copolymers (BCPs) occurs within a deformable emulsion droplet, BCPs can aggregate into a variety of nanoscaled particles with unique nanostructures and properties since the confinement effect can effectively break the symmetry of a structure.

A dissipative particle dynamics simulation study on phase diagrams for the self-assembly of amphiphilic hyperbranched multiarm copolymers in various solvents

Self-assembly of amphiphilic hyperbranched multiarm copolymers (HMCs) has shown great potential for preparing all kinds of delicate supramolecular structures in all scales and dimensions in solution. However, theoretical studies on the influencing factors for the self-assembly of HMCs have been greatly lagging behind. The phase diagram of HMCs in selective solvents is very necessary but has not been disclosed up to now. Here, the self-assembly of HMCs with different hydrophilic fractions in various solvents was studied systematically by using dissipative particle dynamics (DPD) simulations. Three morphological phase diagrams are constructed and a rich variety of morphologies, ranging from spherical micelles, worm-like micelles, membranes, vesicles, vesosomes, small micellar aggregates (SMAs), and aggregates of spherical and worm-like micelles to helical micelles, are obtained. In addition, both the self-assembly mechanisms and the dynamic processes for the formation of these self-assemblies have been systematically investigated. The simulation results are consistent with available experimental observations. Besides, several novel structures, like aggregates of spherical and worm-like micelles, vesosomes and helical micelles, are firstly discovered for HMC self-assembly. We believe the current work will extend the knowledge on the self-assembly of HMCs, especially on the control of supramolecular structures and on fabricating novel self-assemblies.

Evolution of macromolecular complexity in drug delivery systems

Designing therapeutics is a process with many challenges. Even if the first hurdle - designing a drug that modulates the action of a particular biological target in vitro - is overcome, selective delivery to that target in vivo presents a major barrier. Side-effects can, in many cases, result from the need to use higher doses without targeted delivery. However, the established use of macromolecules to encapsulate or conjugate drugs can provide improved delivery, and stands to enable better therapeutic outcomes. In this Review, we discuss how drug delivery approaches have evolved alongside our ability to prepare increasingly complex macromolecular architectures. We examine how this increased complexity has overcome the challenges of drug delivery and discuss its potential for fulfilling unmet needs in nanomedicine.

Structure of Amphiphilic Terpolymer Raspberry Vesicles

Terpolymer raspberry vesicles contain domains of different chemical affinities. They are potential candidates as multi-compartment cargo carriers. Their efficacy depends on their stability and load capacity. Using a model star terpolymer system in an aqueous solution, a dissipative particle dynamic (DPD) simulation is employed to investigate how equilibrium aggregate structures are affected by polymer concentration and pairwise interaction energy in a solution. It is shown that a critical mass of polymer is necessary for vesicle formation. The free energy of the equilibrium aggregates are calculated and the results show that the transition from micelles to vesicles is governed by the interactions between the longest solvophobic block and the solvent. In addition, the ability of vesicles to encapsulate solvent is assessed. It is found that reducing the interaction energy favours solvent encapsulation, although solvent molecules can permeate through the vesicle's shell when repulsive interactions among monomers are low. Thus, one can optimize the loading capacity and the release rate of the vesicles by turning pairwise interaction energies of the polymer and the solvent. The ability to predict and control these aspects of the vesicles is an essential step towards designing vesicles for specific purposes.

Soft Confinement-Induced Morphologies of the Blends of AB Diblock Copolymers and C Homopolymers

Self-assembly behavior of the blends of AB diblock copolymers and C homopolymers in soft confinement is studied by using a simulated annealing method. Polymer solution droplets in a poor solvent environment realize the soft confinement. Several sequences of soft confinement-induced copolymer aggregates with different shapes and internal structures are predicted as functions of the size of confinement, the number ratio of AB diblock copolymers to C homopolymers, the volume fraction of blocks, the selectivity of confinement's surface, the incompatibility between blocks, and the competition between two block-homopolymer interactions. Simulation results demonstrate that those factors are able to tune the morphology of the aggregates precisely. We anticipate the rules achieved here is helpful to fabrication of polymeric particle with predesigned morphology.

Planet-Satellite Micellar Superstructures Formed by ABCB Terpolymers in Solution

The occurrence and relative stability of planet-satellite nanostructures, composed of a host micelle (the planet) accompanied by a number of guest micelles (the satellites), in ABCB tetrablock terpolymer solutions are studied using the polymeric self-consistent field theory and dissipative particle dynamics simulations. The theoretical results demonstrate that the self-assembly of the ABCB tetrablock terpolymers with solvophobic A- and C-blocks and solvophilic B-blocks could lead to the formation of various planet-satellite superstructures, where the planet and satellites are composed of the A- and C-blocks, respectively. Furthermore, the number of satellites is controlled by the ratio of the two B-blocks. The arrangement of the satellites surrounding the planet resembles the solution of the well-known Thomson's problem concerning the optimum arrangement of a given number of electrons on a sphere. Besides providing a facile route to engineering novel multicompartment micelles with planet-satellite superstructures for potential advanced applications, the study strengthens the prospect that multiblock copolymers could become a useful platform for the fabrication of complex nanostructures.

Chiral selection of single helix formed by diblock copolymers confined in nanopores

Chiral selection has attracted tremendous attention from the scientific communities, especially from biologists, due to the mysterious origin of homochirality in life. The self-assembly of achiral block copolymers confined in nanopores offers a simple but useful model of forming helical structures, where the helical structures possess random chirality selection, i.e. equal probability of left-handedness and right-handedness. Based on this model, we study the stimulus-response of chiral selection to external conditions by introducing a designed chiral pattern onto the inner surface of a nanopore, aiming to obtain a defect-free helix with controllable homochirality. A cell dynamics simulation based on the time-dependent Ginzburg-Landau theory is carried out to demonstrate the tuning effect of the patterned surface on the chiral selection. Our results illustrate that the chirality of the helix can be successfully controlled to be consistent with that of the tailored surface patterns. This work provides a successful example for the stimulus response of the chiral selection of self-assembled morphologies from achiral macromolecules to external conditions, and hence sheds light on the understanding of the mechanism of the stimulus response.

Phase behavior of ABC-type triple-hydrophilic block copolymers in aqueous solutions

The phase behavior of symmetric ABC triple-hydrophilic triblock copolymers in concentrated aqueous solutions is investigated using a simulated annealing technique. Two typical cases, in which the hydrophilicity of the middle B-block is either stronger or weaker than that of the end A- and C-blocks, are studied. In these two cases, a variety of phase diagrams are constructed as a function of the volume fraction of the B-block and the copolymer concentration ([Formula: see text] for both non-frustrated and frustrated copolymers. Structures, such as two-color alternatingly packed cylinders or gyroid, and lamellae-in-lamellae etc. that do not occur in the melt system, are obtained in solutions. Rich phase transition sequences, especially re-entrant phase transitions involving complex continuous networks of alternating gyroid and alternating diamond are observed for a given copolymer with decreasing [Formula: see text] . The difference in hydrophilicity among different blocks can result in inhomogeneous distribution of solvent molecules in the morphology, and with the decrease of [Formula: see text] , the distribution of solvent molecules presents a non-monotonic variation. This results in a non-monotonic variation of the effective volume fraction of each domain with the decrease of [Formula: see text] , which induces the re-entrant phase transitions. The presence of a good solvent for all the blocks can cause changes in the effective segregation strengths between different blocks and also in chain conformations, hence can alter the bulk phases and results in the occurrence of new structures and phase transitions. Especially, structures having A-C interfaces or A-C mixed domains can be obtained even in the non-frustrated copolymer systems, and structures obtained in the frustrated systems may be similar to those obtained in the non-frustrated systems. The window of the alternating gyroid structures may occupy a large part of the phase diagram for non-frustrated copolymers with stronger B-hydrophilicity. This behavior can be used to tune the self-assembled structures of block copolymers.

Self-assembly of ABC triblock copolymers under 3D soft confinement: a Monte Carlo study

Under three-dimensional (3D) soft confinement, block copolymers can self-assemble into unique nanostructures that cannot be fabricated in an un-confined space. Linear ABC triblock copolymers containing three chemically distinct polymer blocks possess relatively complex chain architecture, which can be a promising candidate for the 3D confined self-assembly. In the current study, the Monte Carlo technique was applied in a lattice model to study the self-assembly of ABC triblock copolymers under 3D soft confinement, which corresponds to the self-assembly of block copolymers confined in emulsion droplets. We demonstrated how to create various nanostructures by tuning the symmetry of ABC triblock copolymers, the incompatibilities between different block types, and solvent properties. Besides common pupa-like and bud-like nanostructures, our simulations predicted various unique self-assembled nanostructures, including a striped-pattern nanoparticle with intertwined A-cages and C-cages, a pyramid-like nanoparticle with four Janus B-C lamellae adhered onto its four surfaces, an ellipsoidal nanoparticle with a dumbbell-like A-core and two Janus B-C lamellae and a Janus B-C ring surrounding the A-core, a spherical nanoparticle with a A-core and a helical Janus B-C stripe around the A-core, a cubic nanoparticle with a cube-shape A-core and six Janus B-C lamellae adhered onto the surfaces of the A-cube, and a spherical nanoparticle with helical A, B and C structures, from the 3D confined self-assembly of ABC triblock copolymers. Moreover, the formation mechanisms of some typical nanostructures were also examined by the variations of the contact numbers with time and a series of snapshots at different Monte Carlo times. It is found that ABC triblock copolymers usually aggregate into a loose aggregate at first, and then the microphase separation between A, B and C blocks occurs, resulting in the formation of various nanostructures.

Shear-induced self-assembly of linear ABC triblock copolymers in solution: creation of 1D cylindrical micellar structures

In this work, shear flow is introduced to create 1D cylindrical micellar structures based on solution self-assembly of linear ABC terpolymers.

Morphologies and dynamics of linear ABC triblock copolymers with different block sequences

Two different mechanisms of dynamic evolution, i.e. “contacting and fusing” for l-ABC and l-ACB, and “folding and fusing” for l-BAC, are founded firstly.

Dissipative particle dynamics simulations of the morphologies and dynamics of linear ABC triblock copolymers in solutions

Due to the great potential in the field of multifunctional nanoreactors and carriers, several previous works have shown the interesting morphologies of multicompartment micelles from simple linear ABC triblock copolymers in solutions.

Synthesis, postmodification and fluorescence properties of reduction-cleavable core-couplable miktoarm stars with a branched core

Postmodification of (PEG)_m(PCL)_n miktoarm stars with a dual-reactive branched core allowed the introduction of versatile functionalities, and the coumarin-functionalized star exhibited tunable fluorescence properties sensitive to solvent polarity and reduction stimulus.

Monte Carlo study of the micelles constructed by ABCA tetrablock copolymers and their formation in A-selective solvents

Micelles with hamburger-type and Janus-type solvophobic parts, asymmetric vesicles with multicompartment outer surface formed by ABCA tetrablock copolymers in A-selective solvent.

Polypeptide-based "smart" micelles for dual-drug delivery: a combination study of experiments and simulations

A dual-drug-loaded micelle is designed and constructed from a mixture of poly(propylene oxide)-b-poly(γ-benzyl-l-glutamate)-b-poly(ethylene glycol) (PPO-b-PBLG-b-PEG) triblock terpolymers and two model drugs, doxorubicin (DOX) and naproxen (Nap). In the micelles, the DOX is chemically linked to the PBLG backbones through an acid-cleavable hydrazone bond, whereas the Nap is physically encapsulated in the cores. The drug loading and releasing behaviors of the dual-drug-loaded micelles as well as single drug-loaded micelles (DOX-conjugated or Nap-loaded micelles) are studied. The structures of micelles are characterized by means of microscopies and dynamic light scattering, and further examined by dissipative particle dynamics (DPD) simulations. It is revealed that the micelles possess a core-shell-corona structure in which the PPO/Nap, PBLG/DOX, and PEG aggregate to form the core, shell, and corona, respectively. In vitro studies reveal that the release of DOX and Nap is pH- and thermosensitive. Such drug releasing behaviors are also examined by DPD simulations, and more information regarding the mechanism is obtained. In addition, the bio-related properties such as cellular uptake of the micelles and biocompatibility of the deliveries are evaluated. The results show that the dual-drug-loaded micelles are biocompatible at normal physiological conditions and retain the anti-cancer efficiency.