Molecular Design, Device Function and Surface Potential of Zwitterionic Electron Injection Layers

Optimizing Interfacial Energetics for Conjugated Polyelectrolyte Electron Injection Layers in High Efficiency and Fast Responding Polymer Light Emitting Diodes

Modification of the π-conjugated backbone structure of conjugated polyelectrolytes (CPEs) for use as electron injection layers (EILs) in polymer light emitting diodes (PLEDs) has previously brought conflicted results in the literature in terms of device efficiency and turn-on response time. Herein, we determine the energetics at the CPE and the light emitting polymer (LEP) interface as a key factor for PLED device performance. By varying the conjugated backbone structure of both the LEP and CPE, we control the nature of the CPE/LEP interface in terms of optical energy gap offset, interfacial energy level offset, and location of the electron-hole recombination zone. We use a wide gap CPE with a shallow LUMO (F8im-Br) and one with a smaller gap and deeper LUMO (F8imBT-Br), in combination with three different LEPs. We find that the formation of a type II heterojunction at the CPE/LEP interfaces causes interfacial luminance quenching, which is responsible for poor efficiency in PLED devices. The effect is exacerbated with increased energy level offset from ionic rearrangement and hole accumulation occurring near the CPE/LEP interface. However, a deep CPE LUMO is found to be beneficial for fast current and luminance turn-on times of devices. This work provides important CPE molecular design rules for EIL use, offering progress toward a universal PLED-compatible CPE that can simultaneously deliver high efficiency and fast response times. In particular, engineering the LUMO position to be deep enough for fast device turn-on while avoiding the creation of a large energy level offset at the CPE/LEP interface is shown to be highly desirable.

Alcohol-Soluble Zwitterionic 4-(Dimethyl(pyridin-2-yl)ammonio)butane-1-sulfonate Small Molecule as a Cathode Modifier for Nonfullerene Acceptor-Based Organic Solar Cells

A new zwitterionic small molecule 4-(dimethyl(pyridin-2-yl)ammonio)butane-1-sulfonate (PAS), synthesized from 2-dimethylaminopyrindine (2-DMAP), was developed for the ITO cathode modifier. PAS and 2-DMAP dissolved in methanol can form a thin layer on ITO cathode by a simple spin-coating process. The heteroatom moieties in 2-DMAP (sp² and sp³ nitrogen) and PAS (sp² nitrogen and sulfonate ion) can coordinate to the ITO surface and decrease the ITO work function by the induced surface dipoles. The fullerene-based (PBDTT-FTTE:PC₇₁BM) inverted OSCs using PAS and 2-DMAP interlayer can achieve PCEs of 8.95 and 8.26%, respectively, which are superior to the devices without a modifier (PCE = 3.25%) and comparable to the corresponding ZnO-based device (PCE = 8.57%). Nevertheless, 2-DMAP, like other nitrogen-containing polymer interlayer materials, turns out to be not applicable to inverted organic solar cells (I-OSCs) with IT-4F as the n-type electron acceptor because the amino group of 2-DMAP can act as a nucleophile to attack the end-group of IT-4F at the interface. The decomposition of IT-4F by 2-DMAP was carefully proved to be via retro-aldol condensation. As a result, the device (PBDBT-F:IT-4F) modified with 2-DMAP displayed a low PCE of 7.34%. The zwitterionic PAS with reduced nucleophilicity and basicity can modify the ITO surface without decomposing IT-4F. The PBDBT-F:IT-4F-based device modified with PAS maintained a high PCE of 11.41%. Most importantly, the PAS-based device using the well-known Y6 acceptor (PBDBT-F:Y6) can achieve a PCE of 13.82%. This new interfacial material can be universally applied to I-OSCs employing various A-D-A-type acceptors installed with the electrophilic 1,1-dicyanamethylene-5,6-difluoro-3-indanone (FIC) end-group.

Gate Tunable Organic Light Emitting Diodes: Principles and Prospects

This record summarizes our recent developments on gate-tunable organic light-emitting diodes (OLEDs). The key point is to modulate the charge carrier injection barrier by the applied gate potential. One way is to electrochemically dope charge carrier injection layer through porous electrodes. The electrochemically doped charge carrier layer thus form gate-tunable contact with porous electrodes. Another way is to modulate the work-function of electrodes that can have varied charge carrier injection barriers following the applied gate potential. Gate-tunable OLEDs based on these two working principles have been fabricated, characterized and demonstrated for displaying simple digitals and letters. New materials including dielectric, porous electrodes, work function tunable electrodes, and charge carrier injection materials have been further explored for performance improvement.

Gate-Tunable Electron Injection Based Organic Light-Emitting Diodes for Low-Cost and Low-Voltage Active Matrix Displays

Low-cost and low-voltage active matrix displays were fabricated by simply patterning gate electrode arrays on a polymer electrolyte (PE)-coated polymer light-emitting diode (PLED). Structurally, a PE capacitor seamlessly stacked on a PLED by sharing a common Al:LiF composite electrode (PEC|PLED). This monolithic integrated organic optoelectronic device was characterized and interpreted as the tunable work function (surface potential) because of the perturbation of accumulated ions on Al:LiF composite electrode by PEC charging and discharging. The modulation of electron injection by the PEC resulted in increases in the electroluminescent brightness, from <100 cd m^-2 to >8000 cd m^-2, and the external quantum efficiency from <0.025% to 2.4%.

Conjugated Polymer Zwitterions: Efficient Interlayer Materials in Organic Electronics

Conjugated polymer zwitterions (CPZs) are neutral, hydrophilic, polymer semiconductors. The pendent zwitterions, viewed as side chain dipoles, impart solubility in polar solvents for solution processing, and open opportunities as interfacial components of optoelectronic devices, for example, between metal electrodes and organic semiconductor active layers. Such interlayers are crucial for defining the performance of organic electronic devices, e.g., field-effect transistors (OFETs), light-emitting diodes (OLEDs), and photovoltaics (OPVs), all of which consist of multilayer structures. The interlayers reduce the Schottky barrier height and thus improve charge injection in OFETs and OLEDs. In OPVs, the interlayers serve to increase the built-in electric potential difference (V_bi) across the active layer, ensuring efficient extraction of photogenerated charge carriers. In general, polar and even charged electronically active polymers have gained recognition for their ability to modify metal/semiconductor interfaces to the benefit of organic electronics. While conjugated polyelectrolytes (CPEs) as interlayer materials are well-documented, open questions remain about the role of mobile counterions in CPE-containing devices. CPZs possess the processing advantages of CPEs, but as neutral molecules lack any potential complications associated with counterions. The electronic implications of CPZs on metal electrodes stem from the orientation of the zwitterion dipole moment in close proximity to the metal surface, and the resultant surface-induced polarization. This generates an interfacial dipole (Δ) at the CPZ/metal interface, altering the work function of the electrode, as confirmed by ultraviolet photoelectron spectroscopy (UPS), and improving device performance. An ideal cathode interlayer would reduce electrode work function, have orthogonal processability to the active layer, exhibit good film forming properties (i.e., wettability/uniformity), prevent exciton quenching, possess optimal electron affinity that neither limits the work function reduction nor impedes the charge extraction, transport electrons selectively, and exhibit long-term stability. Our recent discoveries show that CPZs achieve many of these attributes, and are poised for further expansion and development in the interfacial science of organic electronics. This Account reviews a recent collaboration that began with the synthesis of CPZs and a study of their structural and electronic properties on metals, then extended to their application as interlayer materials for OPVs. We discuss CPZ structure-property relationships based on several material platforms, ranging from homopolymers to copolymers, and from materials with intrinsic p-type conjugated backbones to those with intrinsic n-type conjugated backbones. We discuss key components of such interlayers, including (i) the origin of work function reduction of CPZ interlayers on metals; (ii) the role of the frontier molecular orbital energy levels and their trade-offs in optimizing electronic and device properties; and (iii) the role of polymer conductivity type and the magnitude of charge carrier mobility. Our motivation is to present our prior use and current understanding of CPZs as interlayer materials in organic electronics, and describe outstanding issues and future potential directions.

Water/alcohol soluble conjugated polymers for the interface engineering of highly efficient polymer light-emitting diodes and polymer solar cells

This review provides a summary of the recent developments and applications of water/alcohol soluble conjugated polymers in highly efficient polymer light-emitting diodes and polymer solar cells.

Conjugated polymeric zwitterions as efficient interlayers in organic solar cells

Conjugated polymeric zwitterions, when utilized as interlayer materials in bulk heterojunction organic solar cells, lead to significantly enhanced power conversion efficiencies. The electrostatic model of self-aligning dipolar side groups in the vicinity of the metal surface rationalizes the effects of reduced cathode work function, a key factor behind the observed enhanced efficiency.