Fe(TPA)-Catalyzed Alkane Hydroxylation. Metal-Based Oxidation vs Radical Chain Autoxidation

Carboxylic Acid Directed γ-Lactonization of Unactivated Primary C-H Bonds Catalyzed by Mn Complexes: Application to Stereoselective Natural Product Diversification

Reactions that enable selective functionalization of strong aliphatic C-H bonds open new synthetic paths to rapidly increase molecular complexity and expand chemical space. Particularly valuable are reactions where site-selectivity can be directed toward a specific C-H bond by catalyst control. Herein we describe the catalytic site- and stereoselective γ-lactonization of unactivated primary C-H bonds in carboxylic acid substrates. The system relies on a chiral Mn catalyst that activates aqueous hydrogen peroxide to promote intramolecular lactonization under mild conditions, via carboxylate binding to the metal center. The system exhibits high site-selectivity and enables the oxidation of unactivated primary γ-C-H bonds even in the presence of intrinsically weaker and a priori more reactive secondary and tertiary ones at α- and β-carbons. With substrates bearing nonequivalent γ-C-H bonds, the factors governing site-selectivity have been uncovered. Most remarkably, by manipulating the absolute chirality of the catalyst, γ-lactonization at methyl groups in gem-dimethyl structural units of rigid cyclic and bicyclic carboxylic acids can be achieved with unprecedented levels of diastereoselectivity. Such control has been successfully exploited in the late-stage lactonization of natural products such as camphoric, camphanic, ketopinic, and isoketopinic acids. DFT analysis points toward a rebound type mechanism initiated by intramolecular 1,7-HAT from a primary γ-C-H bond of the bound substrate to a highly reactive Mn^IV-oxyl intermediate, to deliver a carbon radical that rapidly lactonizes through carboxylate transfer. Intramolecular kinetic deuterium isotope effect and ¹⁸O labeling experiments provide strong support to this mechanistic picture.

C(sp3)-H oxidation and chlorination catalysed by a bioinspired pincer iron(III) complex

A pincer iron(III) catalyst for the oxidation and chlorination of C(sp³)-H bonds was developed. Oxidation of a diagnostic substrate cis-decalin implies that a long-lived carbon-centred radical is involved. Mechanistic studies suggest that an Fe-oxo species could be responsible for the rate-determining C-H activation step. This report expands the scope of non-heme catalysts for C-H functionalisation.

Peptidic Scaffolds Enable Rapid and Multivariate Secondary Sphere Evolution for an Abiotic Metallocatalyst

Metalloenzymes have benefited from the iterative process of evolution to achieve the precise arrangements of secondary sphere non-covalent interactions that enhance metal-centered catalysis. Iterative synthesis of scaffolds that display complex secondary sphere elements in abiotic systems can be highly challenging and time-intensive. To overcome this synthetic bottleneck, we developed a highly modular and rapid synthetic strategy, leveraging the efficiency of solid-phase peptide synthesis and conformational control afforded by non-canonical residues to construct a ligand platform displaying up to four unique residues of varying electronics and sterics in the secondary coordination sphere. As a proof-of-concept that peptidic secondary sphere can cooperate with the metal complex, we applied this scaffold to a well-known, modestly active C-H oxidizing Fe catalyst to evolve specific non-covalent interactions that is more than double its catalytic activity. Solution-state NMR structures of several catalyst variants suggest that higher activity is correlated with a hydrophobic pocket above the Fe center that may enhance the formation of a catalyst-substrate complex. Above all, we show that peptides are a convenient, highly modular, and structurally defined ligand platform for creating secondary coordination spheres that comprise multiple, diverse functional groups.

Activation and catalytic transformation of methane under mild conditions

In the last few decades, worldwide scientists have been motivated by the promising production of chemicals from the widely existing methane (CH₄) under mild conditions for both chemical synthesis with low energy consumption and climate remediation. To achieve this goal, a whole library of catalytic chemistries of transforming CH₄ to various products under mild conditions is required to be developed. Worldwide scientists have made significant efforts to reach this goal. These significant efforts have demonstrated the feasibility of oxidation of CH₄ to value-added intermediate compounds including but not limited to CH₃OH, HCHO, HCOOH, and CH₃COOH under mild conditions. The fundamental understanding of these chemical and catalytic transformations of CH₄ under mild conditions have been achieved to some extent, although currently neither a catalyst nor a catalytic process can be used for chemical production under mild conditions at a large scale. In the academic community, over ten different reactions have been developed for converting CH₄ to different types of oxygenates under mild conditions in terms of a relatively low activation or catalysis temperature. However, there is still a lack of a molecular-level understanding of the activation and catalysis processes performed in extremely complex reaction environments under mild conditions. This article reviewed the fundamental understanding of these activation and catalysis achieved so far. Different oxidative activations of CH₄ or catalytic transformations toward chemical production under mild conditions were reviewed in parallel, by which the trend of developing catalysts for a specific reaction was identified and insights into the design of these catalysts were gained. As a whole, this review focused on discussing profound insights gained through endeavors of scientists in this field. It aimed to present a relatively complete picture for the activation and catalytic transformations of CH₄ to chemicals under mild conditions. Finally, suggestions of potential explorations for the production of chemicals from CH₄ under mild conditions were made. The facing challenges to achieve high yield of ideal products were highlighted and possible solutions to tackle them were briefly proposed.

Transition Metal-Catalyzed C-H Oxidation of Saturated Hydrocarbons with Molecular Oxygen

The C-H oxidation of saturated hydrocarbons to the corresponding alcohols and ketones can be performed efficiently at room temperature with molecular oxygen (1 atm) in the presence of acetaldehyde and catalysts such as Fe, Cu(OH)₂ , and CuCl₂ -18-crown-6 complex. Moreover, extremely high turnover numbers (>27,000) have been obtained for the C-H oxidation of saturated hydrocarbons with molecular oxygen (1 atm) using a combination of Cu(OAc)₂ and acetonitrile at 70 °C. Related oxidation reactions such as epoxidation, Baeyer-Villiger reaction, acetoxylation of β-lactams with molecular oxygen and a suitable aldehyde at room temperature are described.

μ-Oxo-bridged diiron(iii) complexes of tripodal 4N ligands as catalysts for alkane hydroxylation reaction using m-CPBA as an oxidant: substrate vs. self hydroxylation

A series of non-heme μ-oxo-bridged dinuclear iron(iii) complexes of the type [Fe₂(μ-O)(L1–L6)₂Cl₂]Cl₂1–6 have been isolated and their catalytic activity towards oxidative transformation of alkanes into alcohols has been studied using m-choloroperbenzoic acid (m-CPBA) as an oxidant. All the complexes were characterized by CHN, electrochemical, and UV-visible spectroscopic techniques. The molecular structures of 2 and 5 have been determined successfully by single crystal X-ray diffraction analysis and both possesses octahedral coordination geometry and each iron atom is coordinated by four nitrogen atoms of the 4N ligand and a bridging oxygen. The sixth position of each octahedron is coordinated by a chloride ion. The (μ-oxo)diiron(iii) core is linear in 2 (Fe–O–Fe, 180.0°), whereas it is non-linear (Fe–O–Fe, 161°) in 5. All the diiron(iii) complexes show quasi-reversible one electron transfer in the cyclic voltammagram and catalyze the hydroxylation of alkanes like cyclohexane, adamantane with m-CPBA as an oxidant. In acetonitrile solution, adding excess m-CPBA to the diiron(iii) complex 2 without chloride ions leads to intramolecular hydroxylation reaction of the oxidant. Interestingly, 2 catalyzes alkane hydroxylation in the presence of chloride ions, but intramolecular hydroxylation in the absence of chloride ions. The observed selectivity for cyclohexane (A/K, 5–7) and adamantane (3°/2°, 9–18) suggests the involvement of high-valent iron–oxo species rather than freely diffusing radicals in the catalytic reaction. Moreover, 4 oxidizes (A/K, 7) cyclohexane very efficiently up to 513 TON while 5 oxidizes adamantane with good selectivity (3°/2°, 18) using m-CPBA as an oxidant. The electronic effects of ligand donors dictate the efficiency and selectivity of catalytic hydroxylation of alkanes.

The ligand stereoelectronic effect of diiron(iii) complexes determines the efficiency and selectivity of catalytic alkane hydroxylation with m-CPBA as an oxidant.

Lanthanide metal–organic frameworks for catalytic oxidation of olefins

Two isostructural metal–organic frameworks (MOFs), termed Ln-MOF-589 (Ln = La, Ce), were developed for the catalytic oxidation of olefins.

Enhancing catalytic alkane hydroxylation by tuning the outer coordination sphere in a heme-containing metal-organic framework

Catalytic heme active sites of enzymes are sequestered by the protein superstructure and are regulated by precisely defined outer coordination spheres. Here, we emulate these protective functions in the porphyrinic metal-organic framework PCN-224 by post-synthetic acetylation and subsequent hydroxylation of the Zr6 nodes. A suite of physical methods demonstrates that both transformations preserve framework structure, crystallinity, and porosity without modifying the inner coordination spheres of the iron sites. Single-crystal X-ray analyses establish that acetylation replaces the mixture of formate, benzoate, aqua, and terminal hydroxo ligands at the Zr6 nodes with acetate ligands, and hydroxylation affords nodes with seven-coordinate, hydroxo-terminated Zr4+ ions. The chemical influence of these reactions is probed with heme-catalyzed cyclohexane hydroxylation as a model reaction. By virtue of passivated reactive sites at the Zr6 nodes, the acetylated framework oxidizes cyclohexane with a yield of 68(8)%, 2.6-fold higher than in the hydroxylated framework, and an alcohol/ketone ratio of 5.6(3).

Palladium aminopyridine complexes catalyzed selective benzylic C–H oxidations with peracetic acid

Palladium complexes with tripodal ligands of the tpa family efficiently catalyze benzylic C–H oxidation of various substrates with peracetic acid, affording the corresponding ketones in high yields (up to 100%), at <1 mol% catalyst loadings.

Cu(I) Coordination Polymers as the Green Heterogeneous Catalysts for Direct C-H Bonds Activation of Arylalkanes to Ketones in Water with Spatial Confinement Effect

To develop coordination polymers (CPs) as catalysts to selectively catalyze the reaction of C-H bond activation of arylalkanes to their homologous ketones, three new Cu(I)-based coordination polymers (Cu^I-CPs) [CuI(aas-TPB)]_n (1), [CuBr(ass-TPB)CH₃CN]_n (2), and {[Cu(ass-TPB)]Cl}_n (3) (TPB = N,N,N-tris(3-pyridinyl)-1,3,5-benzenetricarboxamide) were synthesized. Structural variations from a herringbone fashion one-dimensional framework of 1 to a two-dimensional framework of 2 containing a 48-membered macrocycle and a cationic three-dimensional framework of 3 filled with Cl^- anions were observed arising from the different halogen ions (I^-, Br^-, and Cl^-). 1-3 were used as the green heterogeneous catalysts to catalyze direct C-H bond activation reactions of arylalkanes to ketones under mild reaction conditions with water as solvent. Handy product separation, convenient reaction procedures, and recyclability of these catalysts make the catalytic system fascinating. Moreover, the Cu^I-CPs performed the reaction with high regioselectivity due to the unique spatial confinement effect of CPs.

Ketone-catalyzed photochemical C(sp3)-H chlorination

Photoexcited arylketones catalyze the direct chlorination of C(sp3)-H groups by N-chlorosuccinimide. Acetophenone is the most effective catalyst for functionalization of unactivated C-H groups while benzophenone provides better yields for benzylic C-H functionalization. Activation of both acetophenone and benzophenone can be achieved by irradiation with a household compact fluorescent lamp. This light-dependent reaction provides a better control of the reaction as compared to the traditional chlorination methods that proceed through a free radical chain propagation mechanism.

Iron Complex Catalyzed Selective C-H Bond Oxidation with Broad Substrate Scope

The use of a peroxidase-mimicking Fe complex has been reported on the basis of the biuret-modified TAML macrocyclic ligand framework (Fe-bTAML) as a catalyst to perform selective oxidation of unactivated 3° C-H bonds and activated 2° C-H bonds with low catalyst loading (1 mol %) and high product yield (excellent mass balance) under near-neutral conditions and broad substrate scope (18 substrates which includes arenes, heteroaromatics, and polar functional groups). Aliphatic C-H oxidation of 3° and 2° sites of complex substrates was achieved with predictable selectivity using steric, electronic, and stereoelectronic rules that govern site selectivity, which included oxidation of (+)-artemisinin to (+)-10β-hydroxyartemisinin. Mechanistic studies indicate Fe^V(O) to be the active oxidant during these reactions.

Design and synthesis of a dinucleating ligand system with varying terminal donor functions that provides no bridging donor and its application to the synthesis of a series of FeIII–μ-O–FeIII complexes

We have developed the dinucleating ligands H₄julia, susan, and H₄hilde^Me2 and present their μ-oxo diferric complexes.

Effective alkaline metal-catalyzed oxidative delignification of hybrid poplar

BACKGROUND

Strategies to improve copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment of hybrid poplar were investigated. These improvements included a combination of increasing hydrolysis yields, while simultaneously decreasing process inputs through (i) more efficient utilization of H2O2 and (ii) the addition of an alkaline extraction step prior to the metal-catalyzed AHP pretreatment. We hypothesized that utilizing this improved process could substantially lower the chemical inputs needed during pretreatment.

RESULTS

Hybrid poplar was pretreated utilizing a modified process in which an alkaline extraction step was incorporated prior to the Cu-AHP treatment step and H2O2 was added batch-wise over the course of 10 h. Our results revealed that the alkaline pre-extraction step improved both lignin and xylan solubilization, which ultimately led to improved glucose (86 %) and xylose (95 %) yields following enzymatic hydrolysis. An increase in the lignin solubilization was also observed with fed-batch H2O2 addition relative to batch-only addition, which again resulted in increased glucose and xylose yields (77 and 93 % versus 63 and 74 %, respectively). Importantly, combining these strategies led to significantly improved sugar yields (96 % glucose and 94 % xylose) following enzymatic hydrolysis. In addition, we found that we could substantially lower the chemical inputs (enzyme, H2O2, and catalyst), while still maintaining high product yields utilizing the improved Cu-AHP process. This pretreatment also provided a relatively pure lignin stream consisting of ≥90 % Klason lignin and only 3 % xylan and 2 % ash following precipitation. Two-dimensional heteronuclear single-quantum coherence (2D HSQC) NMR and size-exclusion chromatography demonstrated that the solubilized lignin was high molecular weight (Mw ≈ 22,000 Da) and only slightly oxidized relative to lignin from untreated poplar.

CONCLUSIONS

This study demonstrated that the fed-batch, two-stage Cu-AHP pretreatment process was effective in pretreating hybrid poplar for its conversion into fermentable sugars. Results showed sugar yields near the theoretical maximum were achieved from enzymatically hydrolyzed hybrid poplar by incorporating an alkaline extraction step prior to pretreatment and by efficiently utilizing H2O2 during the Cu-AHP process. Significantly, this study reports high sugar yields from woody biomass treated with an AHP pretreatment under mild reaction conditions.

Mn(ii) acetate: an efficient and versatile oxidation catalyst for alcohols

A homogeneous catalytic system consisting of Mn(ii) acetate, tert-butylhydroperoxide, acetonitrile and trifluoroacetic acid oxidises various alcohols efficiently and selectively.

Nonheme iron-mediated amination of C(sp3)-H bonds. Quinquepyridine-supported iron-imide/nitrene intermediates by experimental studies and DFT calculations

The 7-coordinate complex [Fe(qpy)(MeCN)2](ClO4)2 (1, qpy = 2,2':6',2″:6″,2''':6''',2''''-quinquepyridine) is a highly active nonheme iron catalyst for intra- and intermolecular amination of C(sp(3))-H bonds. This complex effectively catalyzes the amination of limiting amounts of not only benzylic and allylic C(sp(3))-H bonds of hydrocarbons but also the C(sp(3))-H bonds of cyclic alkanes and cycloalkane/linear alkane moieties in sulfamate esters, such as those derived from menthane and steroids cholane and androstane, using PhI═NR or "PhI(OAc)2 + H2NR" [R = Ts (p-toluenesulfonyl), Ns (p-nitrobenzenesulfonyl)] as nitrogen source, with the amination products isolated in up to 93% yield. Iron imide/nitrene intermediates [Fe(qpy)(NR)(X)](n+) (CX, X = NR, solvent, or anion) are proposed in these amination reactions on the basis of experimental studies including ESI-MS analysis, crossover experiments, Hammett plots, and correlation with C-H bond dissociation energies and with support by DFT calculations. Species consistent with the formulations of [Fe(qpy)(NTs)2](2+) (CNTs) and [Fe(qpy)(NTs)](2+) (C) were detected by high-resolution ESI-MS analysis of the reaction mixture of 1 with PhI═NTs (4 equiv). DFT calculations revealed that the reaction barriers for H-atom abstraction of cyclohexane by the ground state of 7-coordinate CNTs and ground state of C are 15.3 and 14.2 kcal/mol, respectively, in line with the observed high activity of 1 in catalyzing the C-H amination of alkanes under mild conditions.

A Highly Selective Vanadium Catalyst for Benzylic C-H Oxidation

Vanadium complexes have been used extensively to catalyze olefin and alcohol oxidation. However, their application in C-H oxidation has not been well-studied. We report herein that commercially available Cp(2)VCl(2) catalyzes benzylic C-H oxidation selectively and effectively, giving no aromatic oxidation products.