Water in Supercritical Carbon Dioxide Microemulsions: Spectroscopic Investigation of a New Environment for Aqueous Inorganic Chemistry

The phase diagram of carbon dioxide from correlation functions and a many-body potential

The phase stability and equilibria of carbon dioxide are investigated from 125-325 K and 1-10 000 atm using extensive molecular dynamics (MD) simulations and the Two-Phase Thermodynamics (2PT) method. We devise a direct approach for calculating phase diagrams, in general, by considering the separate chemical potentials of the isolated phase at specific points on the P-T diagram. The unique ability of 2PT to accurately and efficiently approximate the entropy and Gibbs energy of liquids allows for assignment of phase boundaries from relatively short (∼100 ps) MD simulations. We validate our approach by calculating the critical properties of the flexible elementary physical model 2, showing good agreement with previous results. We show, however, that the incorrect description of the short-range Pauli force and the lack of molecular charge polarization lead to deviations from experiments at high pressures. We, thus, develop a many-body, fluctuating charge model for CO₂, termed CO₂-Fq, from high level quantum mechanics (QM) calculations that accurately capture the condensed phase vibrational properties of the solid (including the Fermi resonance at 1378 cm^-1) as well as the diffusional properties of the liquid, leading to overall excellent agreement with experiments over the entire phase diagram. This work provides an efficient computational approach for determining phase diagrams of arbitrary systems and underscores the critical role of QM charge reorganization physics in molecular phase stability.

Oxidation of organosolv lignin in a novel surfactant-free microemulsion reactor

Lignin is considered as a promising substitute for fossil resources, but its efficient conversion remains a huge challenge due to the structural complexity and immiscibility with typical solvents. Herein, a series of surfactant-free microemulsion reactors comprised of n-octane, water and n-propanol were designed and their corresponding phase behaviors alongside their ability to intensify oxidative depolymerization of lignin were explored. Experimental results show that the phenolic monomer yield improves substantially (40-500 wt%) by comparison with processes performed in a single solvent. Detailed characterizations also suggest that the above intensification is rationalized by the solubilization effect of microemulsion system and directional aggregation of lignin at the microemulsion interface.

Computer simulation study of fluorocarbon phosphate surfactant based aqueous reverse micelle in supercritical CO2: roles of surfactant functional groups, ionic strength, and phase changes in CO2

Structural and dynamic properties of an aqueous micelle organized from fluorocarbon phosphate surfactant molecules in supercritical carbon dioxide (CO₂) are investigated via molecular dynamics computer simulations. The roles of the functional groups and ionic strength of the surfactants on the formation of reverse micelles in supercritical CO₂, and related water dynamics characterized as translational and reorientational dynamics, are systematically demonstrated by employing three different phosphate-based surfactants paired with sodium cations. The strong electrostatic interactions between the phosphate head groups and sodium cations result in formation of an aqueous core inside the surfactant aggregates, where water molecules are bonded together with loss of the tetrahedral hydrogen bonded network found in bulk water. It is found that all the three surfactants with CO₂-philic fluorocarbon double tails build up well-stabilized reverse micelles in supercritical CO₂, avoiding direct contacts between CO₂ and water molecules. Despite this, the surfactant with a carboxylic ester linkage between the phosphate head and fluorocarbon tail group tends to coordinate water molecules toward sustaining the inter-water hydrogen bonds, indicating better efficiency at covering the aqueous core with hydrophobic groups compared to one without a carboxylic ester group. As for water molecules confined in the reverse micelle, their translational and reorientational motions, and fluctuating dynamics of the inter-water hydrogen bonds, significantly slow down compared to bulk water at ambient temperature. The water dynamics become more restricted with an increase in ionic strength of the anionic surfactant; this is attributed to divalent surfactant heads and sodium cations being more tightly bound together with bonding to water compared to monovalent ones. Lastly, the structural and dynamic changes of the reverse micelle caused by a phase change in CO₂ are monitored with gradually decreasing temperature and pressure from the supercritical to gaseous state for CO₂. The average reverse micelle structure equilibrated in supercritical CO₂ is found to remain stable over a time period of 0.2 ms through a depressurization process to gaseous CO₂. We note that the diverse pathways of surfactant self-aggregation in gaseous CO₂ could be controlled by the preceding solvation procedure in the supercritical regime which governs the final aggregated structures in gaseous CO₂.

Pressure-Responsive, Surfactant-Free CO2-Based Nanostructured Fluids

Microemulsions are extensively used in advanced material and chemical processing. However, considerable amounts of surfactant are needed for their formulation, which is a drawback due to both economic and ecological reasons. Here, we describe the nanostructuration of recently discovered surfactant-free, carbon dioxide (CO2)-based microemulsion-like systems in a water/organic-solvent/CO2 pressurized ternary mixture. "Water-rich" nanodomains embedded into a "water-depleted" matrix have been observed and characterized by the combination of Raman spectroscopy, molecular dynamics simulations, and small-angle neutron scattering. These single-phase fluids show a reversible, pressure-responsive nanostructuration; the "water-rich" nanodomains at a given pressure can be instantaneously degraded/expanded by increasing/decreasing the pressure, resulting in a reversible, rapid, and homogeneous mixing/demixing of their content. This pressure-triggered responsiveness, together with other inherent features of these fluids, such as the absence of any contaminant in the ternary mixture (e.g., surfactant), their spontaneous formation, and their solvation capability (enabling the dissolution of both hydrophobic and hydrophilic molecules), make them appealing complex fluid systems to be used in molecular material processing and in chemical engineering.

Transport properties of microemulsions with ionic liquid apolar domains as a function of ionic liquid content

The conductivity, dynamic viscosity and diffusion coefficient of aqueous ionic liquid microemulsions were measured as a function of ionic liquid content. ​The conclusions from transport properties were supported by UV-Vis as well as FTIR measurements.

Temperature-induced vesicle to micelle transition in cationic/cationic mixed surfactant systems

Temperature-induced vesicle to micelle transition (VMT), which has rarely been reported in cationic/cationic mixed surfactant systems, was systemically studied in a didodecyldimethylammonium bromide (DDAB)/dodecyltrimethylammonium chloride (DTAC) aqueous solution. We investigated the effect of temperature on DDAB/DTAC aqueous solutions by means of turbidity, conductivity, cryo-TEM, a UV-vis spectrophotometer, and a steady-state fluorescence spectrometer. It was found that increasing temperature could induce the transformation from the vesicle to the micelle in this cationic/cationic mixed surfactant system. The degree of transformation can be easily controlled by the operation temperature. Additionally, by adjusting the proportion of the mixed cationic/cationic systems and employing cationic surfactants with different chain-lengths, we were able to conclude that the hydrophobic tail length of the surfactant affects the aggregation behavior of cationic/cationic mixed surfactant systems as a function of temperature. It is universal to induce the transformation from the vesicle to the micelle by temperature in cationic/cationic mixed surfactant systems. A possible mechanism for the temperature-induced VMT was proposed based on the experimental results.

Processing of surfactant templated nano-structured silica films using compressed carbon dioxide as interpreted from in situ fluorescence spectroscopy

The local environment and dynamics of compressed carbon dioxide (CO(2)) penetration in surfactant templated silica film synthesis is interpreted from the in situ fluorescence emission spectra of pyrene (Py) and a modified pyrene probe. Pyrene emission in cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB) templated silica films is monitored immediately after casting and during processing with gaseous and supercritical (sc) CO(2) (17-172 bar, 45 °C). The solvatochromic emission spectra of pyrene in CTAB templated films suggest CO(2) penetration in both the micelle interface and its interior. An anchored derivative of pyrene, 1-pyrenehexadecanoic acid (C(16)-pyr), is established for probing CPB films, where the pyrene moiety is preferentially oriented toward the micelle interior, thus limiting quenching by the pyridinium headgroup of CPB. CO(2) processing of CPB templated silica films results in an increase in the time scale for probe mobility, suggesting an increased time scale of silica condensation through CO(2) processing. The mobility of C(16)-pyr increases with pressure from gaseous to sc CO(2) processing and persists for over 5 h for sc CO(2) processing at 172 bar and 45 °C compared to about 25 min for the unprocessed film. The delivery of CO(2) soluble solutes to specific regions of surfactant templated mesoporous materials is examined via the nonradiative energy transfer (NRET) between pyrene and CO(2)-solubilized naphthalene.

Effective and efficient surfactant for CO2 having only short fluorocarbon chains

A previous study (Langmuir2011, 27, 5772) found the fluorinated double-tail sulfogulutarate 8FG(EO)(2) to act as a superefficient solubilizer for water in supercritical CO(2) (W/CO(2)) microemulsions. To explore more economic CO(2)-philic surfactants with high solubilizing power as well as rapid solubilization rates, the effects of fluorocarbon chain length and linking group were examined with sodium 1,5-bis(1H,1H,2H,2H-perfluoroalkyloxy)-1,5-dioxopentane-2-sulfonates (nFG(EO)(2), fluorocarbon chain length n = 4, 6, 8) and sodium 1,4-bis(1H,1H,2H,2H-perfluoroalkyloxy)-1,4-dioxobutane-2-sulfonate (nFS(EO)(2), n = 4, 8). Visual observation and UV-vis spectral measurements with methyl orange as a reporter dye indicated a maximum water-to-surfactant molar ratio (W(0)) in the microemulsions, which was 60-80 for nFG(EO)(2) and 40-50 for nFG(EO)(2). Although it is normally expected that high solubilizing power requires long fluorocarbon surfactant chains, the shortest fluorocarbon 4FG(EO)(2) interestingly achieved the highest W(0) (80) transparent single-phase W/CO(2) microemulsion. In addition, a very rapid solubilization of loaded water into CO(2) was observed for 4FG(EO)(2) even at a high W(0) of ~80.

Super-efficient surfactant for stabilizing water-in-carbon dioxide microemulsions

The fluorinated double-tailed glutarate anionic surfactant, sodium 1,5-bis[(1H,1H,2H,2H-perfluorodecyl)oxy]-1,5-dioxopentane-2-sulfonate (8FG(EO)(2)), was found to stabilize water-in-supercritical CO(2) microemulsions with high water-to-surfactant molar ratios (W(0)). Studies were carried out here to obtain detailed information on the phase stability and nanostructure of the microemulsions by using a high-pressure UV-vis dye probe and small-angle neutron scattering (SANS) measurements. The UV-vis spectra, with methyl orange as a reporter dye, indicated a maximum attainable W(0) of 60 at 45 and 75 °C, and SANS profiles indicated regular droplet swelling with a linear relationship between the water core nanodroplet radius and W(0). This represents the highest water solubilization reported to date for any water-in-CO(2) microemulsion. Further analysis of the SANS data indicated critical packing parameters for 8FG(EO)(2) at the microemulsion interface >1.34, representing approximately 1.1 times the value for common aerosol-OT in water-in-heptane microemulsions under equivalent conditions.

Switching micellization of pluronics in water by CO2

The micellization of amphiphilic molecules is an interesting topic from both theoretical and practical points of view. Herein we have studied the effects of compressed CO(2) on the micellization of Pluronics in water by means of fluorescence, UV/Vis spectra, and small-angle X-ray scattering. It was found that CO(2) can induce the micellization of Pluronics in water, and the micelle can return to the initial state of molecular dispersion after depressurization. Therefore, the micellization of Pluronics in water can be switched through the easy control of pressure. Different from the common micelles with hydrophobic cores, interestingly, this CO(2)-induced micelle has an amphiphilic core, in which hydrophobic and hydrophilic domains coexist. On account of the ability to dissolve both polar and nonpolar components in the micellar core, the CO(2)-induced micelles can improve the reagent compatibilities frequently encountered in various applications. In an attempt to address this advantage, this micelle was utilized as template to the one-step synthesis of Au/silica core-shell composite nanoparticles. Furthermore, the underlying mechanism for the CO(2)-induced micellization of Pluronics in water was investigated by a series of experiments.

A novel water-in-ionic liquid microemulsion and its interfacial effect on the activity of laccase

It is of great significance to develop an appropriate water-in-ionic liquid (W/IL) microemulsion suitable for the expression of the catalytic activity of a given enzyme. In this paper, the phase diagram of a new AOT/Triton X-100/H(2)O/[Bmim][PF(6)] pseudo ternary system is presented. With the aid of nonionic surfactant Triton X-100, AOT could be dissolved in hydrophobic ionic liquid [Bmim][PF(6)], forming a large single phase microemulsion region. The water-in-[Bmim][PF(6)] (W/IL) microemulsion domain was identified electrochemically by using K(3)Fe(CN)(6) as a probe. The existence of W/IL microemulsions was demonstrated spectrophotometrically by using CoCl(2) as a probe. New evidences from the FTIR spectroscopic study, which was first introduced to the W/IL microemulsion by substituting D(2)O for H(2)O to eliminate the spectral interference, demonstrated that there existed bulk water at larger ω(0) values (ω(0) was defined as the molar ratio of water to the total surfactant) in the W/IL microemulsion, which had remained unclear before. In addition to the inorganic salts, biomacromolecule laccase could be solubilized in the W/IL microemulsion. The laccase hosted in the microemulsion exhibited a catalytic activity and the activity could be regulated by the composition of the interfacial membrane.

Enhanced stabilization of vesicles by compressed CO2

In this work, we studied the effect of compressed CO2 on the stability of vesicles formed in a dodecyltrimethylammonium bromide (DTAB)/sodium dodecyl sulfate (SDS) mixed surfactant system by combination of phase behavior and turbidity study, and UV-vis and fluorescence techniques. It was discovered that compressed CO2 could enhance the stability of vesicles significantly. This new and effective method to stabilize vesicles has some unique advantages over conventional methods. For example, the size and stability of the vesicles can be easily controlled by CO2 pressure; the method is greener because CO2 is a green reagent and it can be released completely after depressurization, which simplifies postseparation processes in applications. The main reason for CO2 to stabilize the vesicles is that CO2 molecules can insert into the hydrophobic bilayer region to enhance the rigidity of the vesicle film and reduce the size of the vesicles, which is different from that of conventional cosolvents (e.g., alcohols) used to stabilize vesicles. On the basis of this discovery, we developed a method to prepare hollow silica spheres using tetraethoxysilane as the precursor and CO2-stabilized vesicles as the template, in which CO2 acts as both the stabilizer of the vesicular template and the catalyst for the hydrolysis reaction of the precursor, and other cosolvents and catalysts are not required. Besides, the size of the silica hollow spheres prepared can be controlled by the pressure of CO2.

Water/supercritical CO2 microemulsions with mixed surfactant systems

Phase behavior was investigated for water/supercritical CO 2 (W/scCO2) microemulsions stabilized with sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO) 2) mixed with various guest surfactants. Only for the mixtures with fluorocarbon-hydrocarbon hybrid anionic surfactants (FC6-HC n), the maximum water-to-surfactant molar ratio (W0(c)) was larger than that estimated from linear interpolation of the W0(c) values for pure 8FS(EO) 2 and pure guest surfactant. Fourier transform infrared (FT-IR) measurement for the microemulsion revealed that the mixing of 8FS(EO) 2 with FC6-HC n can prevent a phase transition from the microemulsion to the liquid crystal even in the presence of excess water. It was also found from the measurement of water/scCO 2 interfacial tension that the area occupied per surfactant molecule was markedly increased by the mixing with FC6-HC n. The loose molecular packing, probably due to a microsegregation of 8FS(EO) 2 and FC6-HC n, is consistent with the enhanced stability of the microemulsion upon surfactant mixing.

Effect of compressed CO2 on the properties of lecithin reverse micelles

Lecithin is a very useful biosurfactant. In this work, the effects of compressed CO 2 on the critical micelle concentration (cmc) of lecithin in cyclohexane and solubilization of water, lysozyme, and PdCl 2 in the lecithin reverse micelles were studied. The micropolarity and pH value of the polar cores of the reverse micelles with and without CO 2 were also investigated. It was found that CO 2 could reduce the cmc of the micellar solution and enhance the capacity of the reverse micelles to solubilize water, the biomolecule, and the inorganic salt significantly. Moreover, the water pools could not be formed in the reverse micelles in the absence of CO 2 because of the limited amount of water solubilized. However, the water pools could be formed in the presence of CO 2 because large amounts of water could be solubilized. All of these provide more opportunity for effective utilization of this green surfactant. The possible mechanism for tuning the properties of the reverse micelles by CO 2 is discussed.