Synthesis of Sulfated Neoglycopolymers: Selective P-Selectin Inhibitors

NIR-II scattering gold superclusters for intravascular optical coherence tomography molecular imaging

Currently, intravascular optical coherence tomography (IV-OCT) is limited to anatomical imaging, providing structural information about atherosclerotic plaque morphology, thrombus and dissection. Earlier detection and risk stratification would be possible through molecular characterization of endothelium but necessitates a purpose-engineered IV-OCT contrast agent. Here we developed gold superclusters (AuSCs) tailored to clinical instrumentation and integrated into clinically relevant workflows. AuSCs are aqueously dispersible clusters of closely packed small gold nanoparticles, affording plasmon hybridization to maximize light scattering at the IV-OCT laser line (~1,350 nm). A polymer coating fosters AuSC uniformity and provides a functionalizable handle, which we targeted to intravascular P-selectin, an early vascular endothelial marker of inflammation. In a rat model of intravascular inflammation, P-selectin-targeted AuSC facilitated IV-OCT molecular imaging, where the strength of the signal correlates with the severity of vascular inflammation.

Systematic Evaluation of Macromolecular Carbohydrate-Lectin Recognition Using Precision Glycopolymers

The precise modulation of protein-carbohydrate interactions is critical in glycobiology, where multivalent binding governs key cellular processes. As such, synthetic glycopolymers are useful for probing these interactions. Herein, we developed precision glycopolymers (PGPs) with unambiguous local chemical composition and well-defined global structure and systematically evaluated the effect of polymer length, hydrophobicity, and backbone hybridization as well as glycan density and identity on the binding to both mammalian and plant lectins. Our studies identified glycan density as a critical factor, with PGPs below 50% grafting density showing significantly weaker lectin interactions. Coarse-grained molecular dynamics simulations suggest that the observed phenomena may be due to a decrease in carbohydrate-carbohydrate interactions in fully grafted PGPs, leading to improved solvent accessibility. In functional assays, these PGPs reduced the cell viability and migration in 4T1 breast cancer cells. Our findings establish a structure-activity relationship in glycopolymers, providing new strategies for designing synthetic glycomacromolecules for a myriad of applications.

A Hitchhiker's Guide to Problem Selection in Carbohydrate Synthesis

Oligosaccharides are ubiquitous in molecular biology and are used for functions ranging from governing protein folding to intercellular communication. Perhaps paradoxically, the exact role of the glycan in most of these settings is not well understood. One reason for this contradiction concerns the fact that carbohydrates often appear in heterogeneous form in nature. These mixtures complicate the isolation of pure material and characterization of structure-activity relationships. As a result, a major bottleneck in glycoscience research is the synthesis and modification of pure materials. While synthetic and chemoenzymatic methods have enabled access to homogeneous tool compounds, a central problem, particularly for newer synthetic chemists, is the matter of problem selection. This outlook aims to provide an entry level overview of fundamental principles in carbohydrate chemistry with an eye toward enabling solutions to frontier challenges.

Sulfation at Glycopolymer Side Chains Switches Activity at the Macrophage Mannose Receptor (CD206) In Vitro and In Vivo

The mannose receptor (CD206) is an endocytic receptor expressed by selected innate immune cells and nonvascular endothelium, which plays a critical role in both homeostasis and pathogen recognition. Although its involvement in the development of several diseases and viral infections is well established, molecular tools able to both provide insight on the chemistry of CD206-ligand interactions and, importantly, effectively modulate its activity are currently lacking. Using novel SO4-3-Gal-glycopolymers targeting its cysteine-rich lectin ectodomain, this study uncovers and elucidates a previously unknown mechanism of CD206 blockade involving the formation of stable intracellular SO4-3-Gal-glycopolymer-CD206 complexes that prevents receptor recycling to the cell membrane. Further, we show that SO4-3-Gal glycopolymers inhibit CD206 both in vitro and in vivo, revealing hitherto unknown receptor function and demonstrating their potential as CD206 modulators within future immunotherapies.

Toward Glycomaterials with Selectivity as Well as Affinity

Multivalent glycosylated materials (polymers, surfaces, and particles) often show high affinity toward carbohydrate binding proteins (e.g., lectins) due to the nonlinear enhancement from the cluster glycoside effect. This affinity gain has potential in applications from diagnostics, biosensors, and targeted delivery to anti-infectives and in an understanding of basic glycobiology. This perspective highlights the question of selectivity, which is less often addressed due to the reductionist nature of glycomaterials and the promiscuity of many lectins. The use of macromolecular features, including architecture, heterogeneous ligand display, and the installation of non-natural glycans, to address this challenge is discussed, and examples of selectivity gains are given.

1,6-heptadiynes based cyclopolymerization functionalized with mannose by post polymer modification for protein interaction

Carbohydrate functionalized polymers or Glycopolymers have earned a great deal of interest in recent times for their potential biomedical applications. In the present study, a mannose containing glycopolymer was synthesized by cyclopolymerization of malonic acid derivative using second generation Hoveyda Grubbs' catalyst. Post-polymerization modification was done to install a propargyl moiety. Finally, functionalization of the propargylated polymer with 2-azidoethyl mannoside using azide-alkyne "click chemistry" furnished the target glycopolymer which was successfully characterized using NMR, FT-IR, mass spectroscopy and advanced polymer chromatography. The glycopolymer was found to self-assemble into capsule and spherical shape in water and DMSO respectively and these morphologies were observed through SEM and TEM. Upon interaction with Con A, the mannose containing glycopolymer showed an increment in aggregation induced fluorescence with increasing concentration of the lectin. In vitro cytotoxicity studies on MCF 7 cell line showed 90% cell viability up to glycopolymer concentration of 500 μg/mL.

Synthetic linear glycopolymers and their biological applications

As typical affinities of carbohydrates with their receptors are modest, polymers of carbohydrates (glycopolymers) are exciting tools to probe the multifaceted biological activities of glycans. In this review, the linear glycopolymers and the multivalency effects are first introduced. This is followed by discussions of methods to synthesize these polymers. Subsequently, the interactions of glycopolymers with plant lectins and viral/bacterial carbohydrate binding proteins are discussed. In addition, applications of the glycopolymers in facilitating glycan microarray studies, mimicking cell surface glycans, modulation of the immune system, cryoprotection of protein, and electron-beam lithography are presented to stimulate further development of this fascinating technology.

Hyaluronan (HA)-inspired glycopolymers as molecular tools for studying HA functions

Hyaluronic acid (HA), the only non-sulphated glycosaminoglycan, serves numerous structural and biological functions in the human body, from providing viscoelasticity in tissues to creating hydrated environments for cell migration and proliferation. HA is also involved in the regulation of morphogenesis, inflammation and tumorigenesis through interactions with specific HA-binding proteins. Whilst the physicochemical and biological properties of HA have been widely studied for decades, the exact mechanisms by which HA exerts its multiple functions are not completely understood. Glycopolymers offer a simple and precise synthetic platform for the preparation of glycan analogues, being an alternative to the demanding synthetic chemical glycosylation. A library of homo, statistical and alternating HA glycopolymers were synthesised by reversible addition-fragmentation chain transfer polymerisation and post-modification utilising copper alkyne-azide cycloaddition to graft orthogonal pendant HA monosaccharides (N-acetyl glucosamine: GlcNAc and glucuronic acid: GlcA) onto the polymer. Using surface plasmon resonance, the binding of the glycopolymers to known HA-binding peptides and proteins (CD44, hyaluronidase) was assessed and compared to carbohydrate-binding proteins (lectins). These studies revealed potential structure-binding relationships between HA monosaccharides and HA receptors and novel HA binders, such as Dectin-1 and DEC-205 lectins. The inhibitory effect of HA glycopolymers on hyaluronidase (HAase) activity was also investigated suggesting GlcNAc- and GlcA-based glycopolymers as potential HAase inhibitors.

Ring-Opening Metathesis Polymerization of Biomass-Derived Levoglucosenol

The readily available cellulose-derived bicyclic compound levoglucosenol was polymerized through ring-opening metathesis polymerization (ROMP) to yield polylevoglucosenol as a novel type of biomass-derived thermoplastic polyacetal, which, unlike polysaccharides, contains cyclic as well as linear segments in its main chain. High-molar-mass polyacetals with apparent weight-average molar masses of up to 100 kg mol^-1 and dispersities of approximately 2 were produced despite the non-living/controlled character of the polymerization due to irreversible deactivation or termination of the catalyst/active chain ends. The resulting highly functionalized polyacetals are glassy in bulk with a glass transition temperature of around 100 °C. In analogy to polysaccharides, polylevoglucosenol degrades slowly in an acidic environment.

Synthesis and adhesion control of glucose-based bioadhesive via strain-promoted azide–alkyne cycloaddition

A glucose-based bioadhesive has been synthesized by radical polymerization. The adhesion was significantly enhanced by biologically safe SPAAC crosslinking after initial attachment on a substrate.

Mimicking Complex Biological Membranes and Their Programmable Glycan Ligands with Dendrimersomes and Glycodendrimersomes

Synthetic vesicles have been assembled and coassembled from phospholipids, their modified versions, and other single amphiphiles into liposomes, and from block copolymers into polymersomes. Their time-consuming synthesis and preparation as stable, monodisperse, and biocompatible liposomes and polymersomes called for the elaboration of new synthetic methodologies. Amphiphilic Janus dendrimers (JDs) and glycodendrimers (JGDs) represent the most recent self-assembling amphiphiles capable of forming monodisperse, stable, and multifunctional unilamellar and multilamellar onion-like vesicles denoted dendrimersomes (DSs) and glycodendrimersomes (GDSs), dendrimercubosomes (DCs), glycodendrimercubosomes (GDCs), and other complex architectures. Amphiphilic JDs consist of hydrophobic dendrons connected to hydrophilic dendrons and can be thought of as monodisperse oligomers of a single amphiphile. They can be functionalized with a variety of molecules such as dyes, and, in the case of JGDs, with carbohydrates. Their iterative modular synthesis provides efficient access to sequence control at the molecular level, resulting in topologies with specific epitope sequence and density. DSs, GDSs, and other architectures from JDs and JGDs serve as powerful tools for mimicking biological membranes and for biomedical applications such as targeted drug and gene delivery and theranostics. This Review covers all aspects of the synthesis of JDs and JGDs and their biological activity and applications after assembly in aqueous media.

Microwave-assisted synthesis of glycopolymers by ring-opening metathesis polymerization (ROMP) in an emulsion system

Well-defined glycopolymers fabricated by microwave-accelerated emulsion polymerization offer promising prospects for deciphering glycan-dependent interactions.

Heparin-Mimicking Polymers: Synthesis and Biological Applications

Heparin is a naturally occurring, highly sulfated polysaccharide that plays a critical role in a range of different biological processes. Therapeutically, it is mostly commonly used as an injectable solution as an anticoagulant for a variety of indications, although it has also been employed in other forms such as coatings on various biomedical devices. Due to the diverse functions of this polysaccharide in the body, including anticoagulation, tissue regeneration, anti-inflammation, and protein stabilization, and drawbacks of its use, analogous heparin-mimicking materials are also widely studied for therapeutic applications. This review focuses on one type of these materials, namely, synthetic heparin-mimicking polymers. Utilization of these polymers provides significant benefits compared to heparin, including enhancing therapeutic efficacy and reducing side effects as a result of fine-tuning heparin-binding motifs and other molecular characteristics. The major types of the various polymers are summarized, as well as their applications. Because development of a broader range of heparin-mimicking materials would further expand the impact of these polymers in the treatment of various diseases, future directions are also discussed.

Synthesis of Glycopolymer Containing Cell-Penetrating Peptides as Inducers of Recombinant Protein Expression under the Control of Lactose Operator/Repressor Systems

We recently reported on newly synthesized S-galactosyl oligo(Arg) conjugates to overcome the serious problem of the passage through the E. coli cell membrane. Following in vivo expression of green fluorescent protein (GFP) induced by each of the S-galactosyl (Arg)n constructs (n = 5, 6, 8) at the T5 promoter in E. coli for 18 h, we visually observed that the cultures fluoresced green light when excited with UV light. The fluorescence intensities for these cultures were greater than that found for a control culture, indicating that the peptides had induced GFP expression. In order to accomplish higher expression efficiency, we investigated the cluster effect and structural fine-tuning of new poly(2-oxazoline) containing CysArgArg as the cell-penetrating peptide (CPP) and S-galactosides when acting as inducers of recombinant protein expression under the control of lac operator/repressor systems in this article. Quantitative fluorescence intensities (calculated per molecule) also supported the observations that the cell-penetrating glyco poly(2-oxazoline)s were better inducers of GFP expression than glyco poly(2-oxazoline) containing no CPP or isopropyl β-d-thiogalactoside. Because the level of GFP expression was directly related to the number of sugar residues in each glyco poly(2-oxazoline), we propose that a cluster effect of the S-galactosides attached to the cell-penetrating poly(2-oxazoline) is responsible for how well the galactosides inhibited the lac repressor to activate the protein expression under the control of the lac operator/repressor system. A similar tendency was observed when the T7 promoter was placed upstream of the gene for an artificial extracellular matrix protein and glyco poly(2-oxazoline)s-CPP conjugates were used as inducers. To assess how the glyco poly(2-oxazoline) penetrate the cell membrane, we labeled the glyco poly(2-oxazoline) using 1-amino pyrene and directly observed the penetration process. Furthermore, we could visualize protein expression under the control of a lac promoter/operator/repressor system using transmission electron microscopy combined with energy dispersive X-ray analysis mapping.

Tunable Nanocarrier Morphologies from Glycopolypeptide-Based Amphiphilic Biocompatible Star Copolymers and Their Carbohydrate Specific Intracellular Delivery

Nanocarriers with carbohydrates on the surface represent a very interesting class of drug-delivery vehicles because carbohydrates are involved in biomolecular recognition events in vivo. We have synthesized biocompatible miktoarm star copolymers comprising glycopolypeptide and poly(ε-caprolactone) chains using ring-opening polymerization and "click chemistry". The amphiphilic copolymers were self-assembled in water into morphologies such as nanorods, polymersomes, and micelles with carbohydrates displayed on the surface. We demonstrate that the formation of nanostructure could be tuned by chain length of the blocks and was not affected by the type of sugar residue. These nanostructures were characterized in detail using a variety of techniques such as TEM, AFM, cryogenic electron microscopy, spectrally resolved fluorescence imaging, and dye encapsulation techniques. We show that it is possible to sequester both hydrophobic as well as hydrophilic dyes within the nanostructures. Finally, we show that these noncytotoxic mannosylated rods and polymersomes were selectively and efficiently taken up by MDA-MB-231 breast cancer cells, demonstrating their potential as nanocarriers for drug delivery.

Regioselective modification of unprotected glycosides

The regioselective modification of unprotected glycosides represents shortcuts in carbohydrate chemistry and enables efficient routes to complex derivatives.

Bioactive polymersomes self-assembled from amphiphilic PPO-glycopolypeptides: synthesis, characterization, and dual-dye encapsulation

Glycopolypeptide-based polymersomes have promising applications as vehicles for targeted drug delivery because they are capable of encapsulating different pharmaceuticals of diverse polarity as well as interacting with specific cell surfaces due to their hollow structural morphology and bioactive surfaces. We have synthesized glycopolypeptide-b-poly(propylene oxide) by ROP of glyco-N-carboxyanhydride (NCA) using the hydrophobic amine-terminated poly(propylene oxide) (PPO) as the initiator. This block copolymer is composed of an FDA-approved PPO hydrophobic block in conjugation with hydrophilic glycopolypeptides which are expected to be biocompatible. We demonstrate the formation of glycopolypeptide-based polymersomes from the self-assembly of glycopolypeptide-b-poly(propylene oxide) in which the presence of an ordered helical glycopolypeptide segment is required for their self-assembly into spherical nanoscale (∼50 nm) polymersomes. The polymersomes were characterized in detail using a variety of techniques such as TEM, AFM, cryo-SEM, and light-scattering measurements. As a model for drugs, both hydrophobic (RBOE) and hydrophilic (calcein) dyes have been incorporated within the polymersomes from solution. To substantiate the simultaneous entrapment of the two dyes, spectrally resolved fluorescence microscopy was performed on the glycopeptide polymersomes cast on a glass substrate. We show that it is possible to visualize individual nanoscale polymersomes and effectively probe the dyes' colocalization and energy-transfer behaviors therein as well as investigate the variation in dual-dye encapsulation over a large number of single polymersomes. Finally, we show that the galactose moieties present on the surface can specifically recognize lectin RCA120, which reveals that the polymersomes' surface is indeed biologically active.

Cationic charged helical glycopolypeptide using ring opening polymerization of 6-deoxy-6-azido-glyco-N-carboxyanhydride

Glycopolypeptides with a defined secondary structure are of significance in understanding biological phenomena. Synthetic glycopolypeptides, or polypeptides featuring pendant carbohydrate moieties, have been of particular interest in the field of tissue engineering and drug delivery. In this work, we have synthesized charged water-soluble glycopolypeptides that adopt a helical conformation in water. This was carried out by the synthesis of a glyco-N-carboxyanhydride (glyco-NCA) containing an azide group at the sixth position of the carbohydrate ring. Subsequently, the NCA was polymerized to obtain azide-containing glycopolypeptides having good control over molecular weight and polydispersity index (PDI) in high yields. We were also able to control the incorporation of the azide group by synthesizing random co-glycopolypeptide containing 6-deoxy-6-azido and regular 6-OAc functionalized glucose. This azide functionality allows for the easy attachment of a bioactive group, which could potentially enhance the biological activity of the glycopolypeptide. We were able to obtain water-soluble charged glycopolypeptides by both reducing the azide groups into amines and using CuAAC with propargylamine. These charged glycopolypeptides were shown to have a helical conformation in water. Preliminary studies showed that these charged glycopolypeptides showed good biocompatibility and were efficiently taken up by HepG2 cells.

Chemical Approach to a Whole Body Imaging of Sialo-N-Linked Glycans

PET and noninvasive fluorescence imaging of the sialo-N-linked glycan derivatives are described. To establish the efficient labeling protocol for N-glycans and/or glycoconjugates, new labeling probes of fluorescence and ⁶⁸Ga-DOTA, as the positron emission nucleus for PET, through rapid 6π-azaelectrocyclization were designed and synthesized, (E)-ester aldehydes. The high reactivity of these probes enabled the labeling of lysine residues in peptides, proteins, and even amino groups on the cell surfaces at very low concentrations of the target molecules (~10⁻⁸ M) within a short reaction time (~5 min) to result in "selective" and "non-destructive" labeling of the more accessible amines. The first MicroPET of glycoproteins, ⁶⁸Ga-DOTA-orosomucoid and asialoorosomucoid, successfully visualized the differences in the circulatory residence of glycoproteins, in the presence or absence of sialic acids. In vivo dynamics of the new N-glycoclusters, prepared by the "self-activating" Huisgen cycloaddition reaction, could also be affected significantly by their partial structures at the non-reducing end, i.e., the presence or absence of sialic acids, and/or sialoside linkages to galactose. Azaelectrocyclization chemistry is also applicable to the engineering of the proteins and/or the cell surfaces by the oligosaccharides; lymphocytes chemically engineered by sialo-N-glycan successfully target the tumor implanted in BALB/C nude mice, detected by noninvasive fluorescence imaging.

Tailored glycopolymers as anticoagulant heparin mimetics

Heparin and its low molecular weight derivatives are clinical therapeutics used to treat and prevent blood clots, but are prone to side effects and contamination. Here we describe the design and expedient synthesis of heparin-based glycopolymers that are potent and potentially safer mimetics of heparin. The mimetics exhibited strong activity against proteases in the coagulation cascade and prolonged blood clot times in human plasma with efficacies similar to those of clinical anticoagulants.

Density variant glycan microarray for evaluating cross-linking of mucin-like glycoconjugates by lectins

Interactions of mucin glycoproteins with cognate receptors are dictated by the structures and spatial organization of glycans that decorate the mucin polypeptide backbone. The glycan-binding proteins, or lectins, that interact with mucins are often oligomeric receptors with multiple ligand binding domains. In this work, we employed a microarray platform comprising synthetic glycopolymers that emulate natural mucins arrayed at different surface densities to evaluate how glycan valency and spatial separation affect the preferential binding mode of a particular lectin. We evaluated a panel of four lectins (Soybean agglutinin (SBA), Wisteria floribunda lectin (WFL), Vicia villosa-B-4 agglutinin (VVA), and Helix pomatia agglutin (HPA)) with specificity for α-N-acetylgalactosamine (α-GalNAc), an epitope displayed on mucins overexpressed in many adenocarcinomas. While these lectins possess the ability to agglutinate A₁-blood cells carrying the α-GalNAc epitope and cross-link low valency glycoconjugates, only SBA showed a tendency to form intermolecular cross-links among the arrayed polyvalent mucin mimetics. These results suggest that glycopolymer microarrays can reveal discrete higher-order binding preferences beyond the recognition of individual glycan epitopes. Our findings indicate that glycan valency can set thresholds for cross-linking by lectins. More broadly, well-defined synthetic glycopolymers enable the integration of glycoconjugate structural and spatial diversity in a single microarray screening platform.

Architecture effects on L-selectin shedding induced by polypeptide-based multivalent ligands

Multivalent interactions between selectins and their ligands play key roles in mediating the rolling and tethering of leukocytes in the early steps of the inflammatory response, as well as in lymphocyte circulation. L-selectin shedding, which is the proteolytic cleavage of L-selectin, can be induced by L-selectin clustering through the binding of multivalent ligands to multiple L-selectin molecules, and it has been shown to regulate leukocyte rolling and subsequent integrin activation for firm adhesion. In this paper, we report the production of homogenous glycopolypeptides modified with a 3,6-disulfo-galactopyranoside equipped with a caproyl linker. The saccharide residue was chemically attached to various polypeptide backbones of differing architectures; the composition and purity of the sulfated glycopolypeptides was confirmed via¹H-NMR spectroscopy, amino acid analysis (AAA), and electrophoretic analysis. The retention of the conformation of the polypeptide backbone was confirmed via circular dichroic spectroscopy. The shedding of l-selectin from the surface of Jurkat cells induced by these sulfated glycopolypeptides, determined via ELISA-based methods, varied based on differences in the architectures of the polypeptide scaffolds, suggesting opportunities for these strategies in probing cell-surface receptor arrays and directing cell signaling events.

Synthesis of a pyridyl disulfide end-functionalized glycopolymer for conjugation to biomolecules and patterning on gold surfaces

A pyridyl disulfide end-functionalized polymer with N-acetyl-d-glucosamine pendant side-chains was synthesized by atom transfer radical polymerization (ATRP). The glycopolymer was prepared from a pyridyl disulfide initiator catalyzed by a Cu(I)/Cu(II)/2,2'-bipyridine system in a mixture of methanol and water at 30 degrees C. The final polymer had a number-average molecular weight (M(n)) of 13.0 kDa determined by (1)H NMR spectroscopy and a narrow polydispersity index (1.12) determined by gel permeation chromatography (GPC). The pyridyl disulfide end-group was then utilized to conjugate the glycopolymer to a double-stranded short interfering RNA (siRNA). Characterization of the glycopolymer-siRNA by polyacrylamide gel electrophoresis (PAGE) showed 97% conjugation. The activated disulfide polymer was also patterned on gold via microcontact printing. The pyridyl disulfide allowed for ready immobilization of the glycopolymer into 200 microm sized features on the surface.

Synthesis and microcontact printing of dual end-functionalized mucin-like glycopolymers for microarray applications

Click to view: Glycopolymers can be used to display glycans on microarrays in native-like architectures. The structurally uniform alkyne-terminated mucin mimetic glycopolymers (see picture; TR = fluorophore) were printed on azide-functionalized chips by microcontact printing in the presence of a copper catalyst. The surface-bound glycopolymers bind lectins in a ligand-specific manner.