The Role and Relevance of the Transfer Coefficient α in the Study of Dissociative Electron Transfers: Concepts and Examples from the Electroreduction of Perbenzoates

Rh single-atom nanozymes for efficient ascorbic acid oxidation and detection

The management of ascorbic acid (AA) in biological fluids is of significant importance for body functions and human health, yet challenging due to the lack of high-performance sensing catalysts. Herein, we report the design of Rh single-atom nanozymes (Rh SAzymes) by mimicking the active sites of ascorbate peroxidase toward efficient electrocatalytic oxidation and detection of AA. Benefiting from the enzyme-mimicking single-atom coordination, the Rh SAzyme exhibits an unprecedented electrocatalytic activity for AA oxidation with an onset potential as low as 0.02 V (vs. Ag/AgCl). Combined with the screen-printing technology, a miniaturized Rh SAzyme biosensor was firstly constructed for tracking dynamic trends of AA in the human subject and detecting AA content in nutritional products. The as-prepared biosensor exhibits excellent detection performances with a wide linear range of 10.0 μM-53.1 mM, a low detection limit of 0.26 μM, and a long stability of 28 days. This work opens a door for the design of artificial single-atom electrocatalysts to mimic natural enzymes and their subsequent application in biosensors.

Anti-Stokes photoinduced electrochemiluminescence at a photocathode

Anti-Stokes photoinduced electrochemiluminescence (PECL) converts infrared photons to visible photons and is usually triggered at a narrow band gap-protected photoanode. Here, we report the first example of PECL with the model [Ru(bpy)₃]²⁺/benzoyl peroxide system at a bare p-type Si photocathode. The reported PECL system, which allows a notable decrease of the cathodic potential required for ECL generation, should open new opportunities for imaging and light-addressable devices.

Facile fabrication of GCE/Nafion/Ni composite, a robust platform to detect hydrogen peroxide in basic medium via oxidation reaction

Nickel particles alone can oxidize hydrogen peroxide but confronts extreme stability problem which imparts a barrier to act as sensor. The porous Nafion bed on glassy carbon electrode (GCE) surface provides the sureness of incorporating of Ni particles which was further exploited as an electrochemical sensor for H₂O₂ detection through oxidative degradation process. The simple electrochemical incorporation of Ni particles along the pores of Nafion improves the stability of the sensor significantly. The oxidative pathway of hydrogen peroxide on GCE/Nafion/Ni was probed by analyzing mass transfer dependent linear sweep voltammograms both in static and rotating modes along with chronoamperometry. An electron transfer step determines the overall reaction rate with k°= 2.72 × 10^-4 cm s^-1, which is supported by the values of transfer coefficient (β) in between (0.68-0.75). Sensing performance was evaluated by recording differential pulse voltammograms (DPVs) with the linear detection limit (LOD) of 1.8 μM and linear dynamic range (LDR) of 5-500 μM. Real samples from industrial sources were successfully quantified with excellent reproducibility mark GCE/Nafion/Ni electrode as an applicable sensor.

Electrochemical reductive remediation of trichloroethylene contaminated groundwater using biomimetic iron-nitrogen-doped carbon

Electrochemical dechlorination is a prospective strategy to remediate trichloroethylene (TCE)-contaminated groundwater. In this work, iron-nitrogen-doped carbon (FeNC) mimicking microbiological dechlorination coenzymes was developed for TCE removal under environmentally related conditions. The biomimetic FeNC-900, FeNC-1000, and FeNC-1100 materials were synthesized via pyrolysis at different temperatures (900, 1000, and 1100 °C). Due to the synergistic effect of Fe-N₄ active sites and graphitic N sites, FeNC-1000 had the highest electron transfer efficiency and the largest electrochemical active surface area among the as-synthesized FeNC catalysts. The pseudo-first-order rate constants for TCE reduction using FeNC-1000 catalyst are 0.19, 0.28 and 0.36 h^-1 at potentials of -0.8 V, -1.0 V and -1.2 V, respectively. Active hydrogen and direct electrons transfer both contribute to the dechlorination from TCE to C₂H₄ and C₂H₆. FeNC maintain a high reactivity after five reuse cycles. Our study provides a novel approach for the dechlorination of chlorinated organic contaminants in groundwater.

Electrogenerated chemiluminescence detection of single entities

Electrogenerated chemiluminescence, also known as electrochemiluminescence (ECL), is an electrochemically induced production of light by excited luminophores generated during redox reactions. It can be used to sense the charge transfer and related processes at electrodes via a simple visual readout; hence, ECL is an outstanding tool in analytical sensing. The traditional ECL approach measures averaged electrochemical quantities of a large ensemble of individual entities, including molecules, microstructures and ions. However, as a real system is usually heterogeneous, the study of single entities holds great potential in elucidating new truths of nature which are averaged out in ensemble assays or hidden in complex systems. We would like to review the development of ECL intensity and imaging based single entity detection and place emphasis on the assays of small entities including single molecules, micro/nanoparticles and cells. The current challenges for and perspectives on ECL detection of single entities are also discussed.

Heterogeneous Kinetics of Thiourea Electro-Catalytic Oxidation Reactions on Palladium Surface in Aqueous Medium

The electrochemical behaviors of thiourea (TU) oxidation have been studied at Palladium (Pd) electrode in the acidic medium by recording cyclic voltammograms (CVs). The influence of pH was investigated in the pH range of 1.0 to 9.0. Facilitated adsorption of TU on electrode surface results in enhanced catalytic response in acidic medium and maximum electro-catalytic response was found at pH∼3.0. Chronoamperometric (CA) experiment determined this oxidation as 1e^- transfer process and the variation of TU concentration reveals a 1st order kinetics. In the CV responses, the large value of peak separation (▵E_p >380 mV) calculated by the variation of scan rate indicates that oxidation of TU is an irreversible process. With the aid of convolution potential sweep voltammetry (CPSV), the standard rate constant (k°) for the reaction was found to be 7.1×10^-4 cm/s and the formal potential constant (E°' ) was evaluated to be ∼0.37 V vs Ag/AgCl (sat. KCl). The value of transfer coefficient (α) was found to vary from 0.74 to 0.40 with applied potential (E). From the potential dependent variation of transfer coefficient (α) and activation energy (▵G^≠ ), it was concluded that the overall electrochemical oxidation of TU follows a stepwise mechanism at lower potential (<0.40) V and a concerted one at relatively higher potential (>0.40) V. The FTIR analysis of the product after oxidation of TU molecules confirmed the appearance of a new sharp band near 530 cm^-1 due to the formation of S-S bonds suggesting formation of formamidine disulfide (FD) ions.

Interplay between Structure and Mechanism in Reductive Dissociative Electron Transfers to α,β -Epoxyketones

The electrochemical reduction of several α,β -epoxyketones was studied using cyclic (linear sweep) voltammetry, convolution voltammetry, and homogeneous redox catalysis. The results were reconciled to pertinent theories of electron transfer. α,β -Epoxyketones undergo dissociative electron-transfer reactions with C-O bond cleavage, via both stepwise and concerted mechanisms, depending on their structure. For aliphatic ketones, the preferred mechanism of reduction is consistent with the "sticky" concerted model for dissociative electron transfer. Bond cleavage occurs simultaneously with electron transfer, and there is a residual, electrostatic interaction in the ring-opened (distonic) radical anion. In contrast, for aromatic ketones, because the ring-closed radical anions are resonance-stabilized and exist at energy minima, a stepwise mechanism operates (electron transfer and bond cleavage occur in discrete steps). The rate constants for ring opening are on the order of 10⁸  s^-1 , and not significantly affected by substituents on the 3-membered ring (consistent with C-O bond cleavage). These results and conclusions were fully supported and augmented by molecular orbital calculations.

Mechanistic insight into the electrocatalytic performance of reduced graphene oxide supported palladium, silver and palladium-silver nanodeposits toward electro-dehalogenation of halocarbons in room temperature ionic liquids

Herein, we report the results from our extensive voltammetric investigations designed to explore, assess and explain the electrocatalytic performance of reduced graphene oxide supported metal nano-deposits toward the electro-dehalogenation of halocarbons in room temperature ionic liquids (RTILs). Specifically, we investigated the electro-reductive dechlorination of the model halocarbon, carbon tetrachloride over glassy carbon electrode (GCE) and palladium-graphene (Pd-Gr), silver-graphene (Ag-Gr) and palladium-silver-graphene (PdAg-Gr) nanocomposites in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM][NTf₂]). Analysis of the voltammetric data in light of Marcus-Hush formulation reveals that the electro-reductive cleavage of the C-Cl bond of CCl₄ over GCE in [BMIM][NTf₂] follows a sticky dissociative electron transfer (SDET) pathway. The significantly stronger interaction energy between electrogenerated Cl^- and CCl₃˙ (radical) fragments in RTILs makes electroreduction of CCl₄ in [BMIM][NTf₂] much easier than in organic solvents. The activation-driving force relationship for electro-catalytic dechlorination of CCl₄ over Pd-Gr was observed to follow a modified sticky dissociative electron transfer model wherein apart from the ion-radical interaction, the adsorptive interaction of chlorinated species with the electrocatalytic surface needs to be taken into consideration to account for the apparent activation energy-driving force dependence. Interestingly the activation energy-driving force relationships for the electroreduction of CCl₄ over Ag-Gr and PdAg-Gr were observed to fit a modified stepwise ET (MSET) pathway. In the MSET pathway, the adsorption and the implied free energy change of the electroreducible halocarbon significantly alter the solvent re-organization energy and the inherent barrier for the heterogeneous ET process. The adsorptive interaction and hence the electrocatalytic performance of PdAg-Gr were observed to be more than that observed for Ag-Gr. This is attributed to the Ag to Pd charge transfer in the PdAg-Gr nanodeposits. Our results besides underlining the positive influence of RTILs in facilitating the electroreductive detoxification of halocarbons, very well establish the mechanistic basis for the electrocatalytic performance of graphene based nanodeposits toward electrodehalogenation of halocarbons.

Photophysics, Electrochemistry and Efficient Electrochemiluminescence of Trigonal Truxene-Core Dyes

We synthesized and characterized a series of dyes built from a spirofluorene or truxene core. The quadrupolar spirofluorene system is the initial building unit for the design and preparation of more complex star-shaped dyes consisting of a truxene core bearing three di- or triphenylamine moieties with or without a thiophene connector. Their photophysical, electrochemical, and electrochemiluminescence (ECL) properties were first investigated in solution. Structure/activity relationships were derived and rationalized by comparing the quadrupolar system and trigonal truxene-core derivatives using computational studies. The photophysical and redox characteristics are drastically tuned by the introduction of a thiophene bridge and electron-donor substituents at their terminal branches. These comparative studies show the essential role of the stability of both radical cations and anions to obtain efficient ECL dyes. The stabilization of the radicals is directly related to the charge delocalization due to the π-conjugation by the thiophene bridge. The brightest ECL is achieved by annihilation and coreactant (benzoyl peroxide) pathways with the blue-emitting truxene dye, which is 2- and 4.5-times greater than that of the quadrupolar compound and reference [Ru(bpy)₃ ]²⁺ emitter, respectively. Such an extensive study on these extended π-conjugated molecules presenting different core structures may guide the design and synthesis of new ECL dyes with a strong efficiency.

Intrinsic nature of photocatalysis by comparing with electrochemistry

Photocatalysis has been gathering much attention because of the unique applications of photoenergy for environmental cleaning and solar fuel production. Electron transfer (ET) at the solid-liquid interface, which initiates photocatalytic reactions, has been the subject of electrochemistry, and hence the reactions are often analyzed in terms of electrochemistry. However, how extensively the concept of electrochemistry can be incorporated has not been discussed so far. In this report, by comparing with electrochemistry, the intrinsic nature of photocatalysis is disclosed and the limitation of the use of the concept of electrochemistry was pointed out. The electric potential near the photocatalyst surface was calculated and visualized, showing a potential gradient similar to that at the electrode surface but localized near the positive hole. Since the frequency of the ET at the photocatalyst surface is limited by the photon absorption, the investigation of photocatalysis in terms of energy states and kinetics should be different from those for electrochemistry. Since semiconductor photocatalysts are not wired to the electric source, the estimation of energy band positions may be altered, which was actually discussed in terms of the band alignments of anatase and rutile TiO2 crystals.

Solid state electrochemiluminescence from homogeneous and patterned monolayers of bifunctional spirobifluorene

Electrochemiluminescence (ECL) from self-assembled monolayers of a spirobifluorene dye covalently linked to a transparent ITO surface is reported.

Dissociative electron transfer to diphenyl-substituted bicyclic endoperoxides: the effect of molecular structure on the reactivity of distonic radical anions and determination of thermochemical parameters

The heterogeneous electron transfer reduction of the bicyclic endoperoxide 1,4-diphenyl-2,3-dioxabicyclo[2.2.1]hept-5-ene (4) was investigated in N,N-dimethylformamide at a glassy carbon electrode. The endoperoxide reacts by a concerted dissociative ET mechanism resulting in reduction of the O-O bond with an observed peak potential of −1.4 V at 0.2 V s⁻¹. The major product (90% yield) resulting from the heterogeneous bulk electrolysis of 4 at −1.4 V with a rotating disk glassy carbon electrode is 1,4-diphenyl-cyclopent-2-ene-cis-1,3-diol with a consumption of 1.73 electrons per mole. In contrast, 1,4-diphenyl-2,3-dioxabicyclo[2.2.2]oct-5-ene (1), undergoes a two-electron reduction mechanism in quantitative yield. This difference in product yield between 1 and 4 is suggestive of a radical-anion mechanism, as observed with 1,4-diphenyl-2,3-dioxabicyclo-[2.2.2] octane (2) and 1,4-diphenyl-2,3-dioxabicyclo[2.2.1]heptane (3). Convolution potential sweep voltammetry is used to determine unknown thermochemical parameters of 4, including the O-O bond dissociation energy and the standard reduction potential and a comparison is made to the previously studied bicyclic endoperoxides 1–3 with respect to the effect of molecular structure on the reactivity of distonic radical anions.

Understanding intrinsically irreversible, non-Nernstian, two-electron redox processes: a combined experimental and computational study of the electrochemical activation of platinum(IV) antitumor prodrugs

Six-coordinate Pt(IV)-complexes are prominent prodrug candidates for the treatment of various cancers where, upon two-electron reduction and loss of two axial ligands, they form more familiar, pharmacologically active four-coordinate Pt(II) drugs. A series of electrochemical experiments coupled with extensive density functional calculations has been employed to elucidate the mechanism for the two-electron reduction of Pt(IV)(NH3)2Cl2L2 to Pt(II)(NH3)2Cl2 (L = CH3COO(-), 1; L = CHCl2COO(-), 2; L = Cl(-), 3). A reliable estimate for the normal reduction potential E(o) is derived for the electrochemically irreversible Pt(IV) reduction and is compared directly to the quantum chemically calculated reduction potentials. The process of electron transfer and Pt-L bond cleavage is found to occur in a stepwise fashion, suggesting that a metastable six-coordinate Pt(III) intermediate is formed upon addition of a single electron, and the loss of both axial ligands is associated with the second electron transfer. The quantum chemically calculated reduction potentials are in excellent agreement with experimentally determined values that are notably more positive than peak potentials reported previously for 1-3.

Luminescent 'On-Off' CdSe/ZnS quantum dot chemodosimeter for hydroxide based on photoinduced electron transfer from a carboxylate moiety

A CdSe-ZnS quantum dot (QD) has been surface functionalised by a place exchange reaction with p-mercaptomethyl benzoate synthesized by a three-step procedure. The resulting lumophore-spacer-receptor QD-conjugate was characterized by IR, UV-visible and fluorescence spectroscopy. The emission profile of the QD reveals a narrow emission peak centred at 542 nm. Addition of hydroxide to the solution containing the QD-conjugate results in quenching of the original fluorescence, which is attributed to a photoinduced electron transfer reaction from the electron-rich benzoate moiety to the QD valence band. This is the first reported example of fluorescent quenching of a CdSe-ZnS QD luminescence by an aryl carboxylate moiety.

Electron transfer catalysis with monolayer protected Au₂₅ clusters

Au₂₅L₁₈ (L = S(CH₂)₂Ph) clusters were prepared and characterized. The resulting monodisperse clusters were reacted with bis(pentafluorobenzoyl) peroxide in dichloromethane to form Au₂₅L₁₈⁺ quantitatively. The kinetics and thermodynamics of the corresponding electron transfer (ET) reactions were characterized via electrochemistry and thermochemical calculations. Au₂₅L₁₈⁺ was used in homogeneous redox catalysis experiments with a series of sym-substituted benzoyl peroxides, including the above peroxide, bis(para-cyanobenzoyl) peroxide, dibenzoyl peroxide, and bis(para-methoxybenzoyl) peroxide. Peroxide dissociative ET was catalyzed using both the Au₂₅L₁₈/Au₂₅L₁₈⁻ and the Au₂₅L₁₈⁺/Au₂₅L₁₈ redox couples as redox mediators. Simulation of the CV curves led to determination of the ET rate constant (k(ET)) values for concerted dissociative ET to the peroxides. The ET free energy ΔG° could be estimated for all donor-acceptor combinations, leading to observation of a nice activation-driving force (log k(ET)vs.ΔG°) relationship. Comparison with the k(ET) obtained using a ferrocene-type donor with a formal potential similar to that of Au₂₅L₁₈/Au₂₅L₁₈⁻ showed that the presence of the capping monolayer affects the ET rate rather significantly, which is attributed to the intrinsic nonadiabaticity of peroxide acceptors.

Effect of the charge state (z = -1, 0, +1) on the nuclear magnetic resonance of monodisperse Au25[S(CH2)2Ph]18(z) clusters

Monodisperse Au(25)L(18)(0) (L = S(CH(2))(2)Ph) and [n-Oct(4)N(+)][Au(25)L(18)(-)] clusters were synthesized in tetrahydrofuran. An original strategy was then devised to oxidize them: in the presence of bis(pentafluorobenzoyl) peroxide, the neutral or the negatively charged clusters react as efficient electron donors in a dissociative electron-transfer (ET) process, in the former case yielding [Au(25)L(18)(+)][C(6)F(5)CO(2)(-)]. As opposed to other reported redox methods, this dissociative ET approach is irreversible, easily controllable, and clean, particularly for NMR purposes, as no hydrogen atoms are introduced. By using this approach, the -1, 0, and +1 charge states of Au(25)L(18) could be fully characterized by (1)H and (13)C NMR spectroscopy, using one- and two-dimensional techniques, in various solvents, and as a function of temperature. For all charge states, the NMR results and analysis nicely match recent structural findings about the presence of two different ligand populations in the capping monolayer, each resonance of the two ligand families displaying distinct NMR patterns. The radical nature of Au(25)L(18)(0) is particularly evident in the (1)H and (13)C NMR patterns of the inner ligands. The NMR behavior of radical Au(25)L(18)(0) was also simulated by DFT calculations, and the interplay between theory and experiments revealed a fundamental paramagnetic contribution coming from Fermi contact shifts. Interestingly, the NMR patterns of Au(25)L(18)(-) and Au(25)L(18)(+) were found to be quite similar, pointing to the latter cluster form as a diamagnetic species.

The quantitative characterization of free radical sources and traps by electromigration applications

Nowadays, very diverse human activities generate urgent demands for fast, sensitive reliable innovative tools capable of detecting major industrial, military, and other dangerous products. An important part of these compounds are free radicals. Capillary electrophoresis (CE), especially in its miniaturized format (lab-on-a-chip), and other electromigration methods offer special possibilities to resolve this problem. These measurements have a great opportuness because of very wide chemical and biological role of free radicals. Several compounds, e.g. monomers and some biologically important groups (as are nitrones) oppose oxidative challenges by virtue of their trap very rapidly oxygen- or carbon-centered radicals and generating other radical species which are stable and biochemically less harmful than the original ones. In many cases, conventionally, the relative trap capacity is measured against tert.-butylhydroperoxide (TBH). In this lecture are presented numerous important free radical species (active oxygen-, nitrogen- and carbon-centered ones, as HO, NO etc) and their adequate in vitro and in vivo applied bioanalytical methods, including liquid chromatography with electrochemical detection and mass spectrometry, gas chromatography with mass spectrometry, capillary electrophoresis, electron spin resonance and chemiluminescence analysis. A simple and highly sensitive method is the capillary zone electrophoresis with amperometric detection (CZE-AD); It was introduced to determine indirectly OH by analysing its reaction products with salicylic and dihydroxybenzoic acids. Hydroxylated radical products of these acids are often used as a relative measurement in free radical research. Accurate determination of pK(a) values is important for proper characterization of newly synthesized molecules. CZE method was used for determination of their values. Are initiated new research fields as Fenton-, electro-Fenton and photoelectro-Fenton chemistry and foreseen their perspectives. Nitric oxide is an important cell signaling molecule in physiology and pathophysiology. An indirect method for monitoring nitric oxide (NO) by determining nitrate and nitrite by microchip capillary electrophoresis (CE) with electrochemical (EC) detection has been developed. The amount of nitrite formed in this reaction (analyzed by capillary electrophoresis) was compared with the amount of oxygen consumed (measured by polarography). Were observed a linear relationship between the amount of consumed oxygen and the amount of nitrite formed in the measured range. These results demonstrate that polarographic measurements of the amount of oxygen consumed in the reaction with NO could be used to estimate the concentration of dissolved NO in authentic media. Polarography is an adequate method also to quantitative kinetic study of the free radical activity and of the trapping capacity of different compounds. This method is based on measure of the catalytic polarografic current of Fe(III) in the presence of free radical sources (TBH, hydrogen-peroxydes), and their traps. Personal contribution of the authors in this field is discussed.