Photocontrolled Radical Polymerization from Hydridic C-H Bonds

CdS Quantum Dot Gels as a Direct Hydrogen Atom Transfer Photocatalyst for C-H Activation

Here, we report CdS quantum dot (QD) gels, a three-dimensional network of interconnected CdS QDs, as a new type of direct hydrogen atom transfer (d-HAT) photocatalyst for C-H activation. We discovered that the photoexcited CdS QD gel could generate various neutral radicals, including α-amido, heterocyclic, acyl, and benzylic radicals, from their corresponding stable molecular substrates, including amides, thio/ethers, aldehydes, and benzylic compounds. Its C-H activation ability imparts a broad substrate and reaction scope. The mechanistic study reveals that this reactivity is intrinsic to CdS materials, and the neutral radical generation did not proceed via the conventional sequential electron transfer and proton transfer pathway. Instead, the C-H bonds are activated by the photoexcited CdS QD gel via a d-HAT mechanism. This d-HAT mechanism is supported by the linear correlation between the logarithm of the C-H bond activation rate constant and the C-H bond dissociation energy (BDE) with a Brønsted slope α=0.5. Our findings expand the currently limited direct hydrogen atom transfer photocatalysis toolbox and provide new possibilities for photocatalytic C-H activation.

Direct Functionalization of Polyethylene Surfaces with High-Density Polymer Brushes

Introducing functionality onto PE surfaces is a longstanding challenge in polymer science, driven by the need for polymer materials with improved adhesion and antifouling properties. Herein, we report surface-initiated hydrogen atom transfer-reversible addition-fragmentation chain transfer (SI HAT-RAFT) as a robust method to grow high-density brush polymers from PE surfaces. We demonstrate that, under mild conditions, direct initiation from the C-H bonds of PE surfaces allows for the graft polymerization of a variety of (meth)acrylate monomers. The resulting polymer brushes reached several hundred nanometers in thickness with densities of ca. 0.62 chains/nm2, compared to the current standard of ∼0.28 chains/nm2. Finally, we show that our method is capable of dramatically improving the adhesive properties of PE surfaces. This work enables the preparation of PE with diverse surface functionalities for potential use in biomedical, industrial, and battery applications.

A General Approach for Photo-Oxidative Degradation of Various Polymers

The escalating demand for plastics has resulted in a surge of plastic waste worldwide, posing a monumental environmental challenge. To address this issue, a versatile photo-oxidative degradation method applicable to seven distinct polymer families is proposed, comprising poly(isobutyl vinyl ether) (PIBVE), poly(2,3-dihydrofuran) (PDHF), poly(vinyl acetate) (PVAc), poly(n-butyl acrylate) (PBA), poly(methyl acrylate) (PMA), poly(vinyl chloride) (PVC), poly(dimethyl acrylamide) (PDMA), poly(ethylene oxide) (PEO), poly(oligo(ethylene glycol) methyl ether acrylate) (PEGMEA), and even poly(methyl methacrylate) (PMMA). This method employs photo-mediated hydrogen atom transfer (HAT) followed by oxidation to promote polymer degradation. This reaction is carried out under aerobic condition in the presence of iron trichloride (FeCl3) as a photocatalyst in combination with low-intensity purple light irradiation. The process can degrade up to 97% of the polymer in less than 3 h. This degradation process can be easily controlled by switching the light off, which allows for precise modulation of the degradation rate, enhancing the effectiveness of the method. Overall, this method provides a sustainable method for degrading various polymer types with low energy input.

Metal Free Functionalization of Saturated Heterocycles with Vinylarenes and Pyridine Enabled by Photocatalytic Hydrogen Atom Transfer

Saturated heterocycles are important class of structural scaffolds in small-molecule drugs, natural products, and synthetic intermediates. Here, we disclosed a metal free, mild, and scalable functionalization of saturated heterocycles using vinylarenes as a linchpin approach. Key to success of this transformation is the employing of simple and cheap benzophenone as a hydrogen atom transfer (HAT) catalyst. This operationally robust process was used for the making of diverse functionalized saturated heterocycles. Furthermore, aldehydes, alkane, and alcohol have been functionalized under the optimized conditions. The potential pharmaceutical utility of the procedure has also been demonstrated by late-stage functionalization of bioactive natural compounds and pharmaceutical molecules. Initial mechanism studies and control experiments were performed to elucidate the mechanism of the reactions.

In-situ noncovalent interaction of ammonium ion enabled C-H bond functionalization of polyethylene glycols

The noncovalent interactions of ammonium ion with multidentate oxygen-based host has never been reported as a reacting center in catalytic reactions. In this work, we report a reactivity enhancement process enabled by non-covalent interaction of ammonium ion, achieving the C-H functionalization of polyethylene glycols with acrylates by utilizing photoinduced co-catalysis of iridium and quinuclidine. A broad scope of alkenes can be tolerated without observing significant degradation. Moreover, this cyano-free condition respectively allows the incorporation of bioactive molecules and the PEGylation of dithiothreitol-treated bovine serum albumin, showing great potentials in drug delivery and protein modification. DFT calculations disclose that the formed α-carbon radical adjacent to oxygen-atom is reduced directly by iridium before acrylate addition. And preliminary mechanistic experiments reveal that the noncovalent interaction of PEG chain with the formed quinuclidinium species plays a unique role as a catalytic site by facilitating the proton transfer and ultimately enabling the transformation efficiently.

RAFT Polymerisation by the Radical Decarboxylation of Carboxylic Acids

The controlled grafting of polymers from small- and macro-molecular substrates is an essential process for many advanced polymer applications. This usually requires the pre-functionalisation of substrates with an appropriate functional group, such as a RAFT agent or ATRP initiator, which requires additional synthetic steps. In this paper, we describe the direct grafting of RAFT polymers from carboxylate containing small molecules and polymers via photochemical radical decarboxylation. This method utilises the innate functional groups present in the substrates, and achieves efficient polymer initiation in a single step with excellent control of molecular weight and dispersity.

Resurgence and advancement of photochemical hydrogen atom transfer processes in selective alkane functionalizations

The selective functionalization of alkanes has long been recognized as a prominent challenge and an arduous task in organic synthesis. Hydrogen atom transfer (HAT) processes enable the direct generation of reactive alkyl radicals from feedstock alkanes and have been successfully employed in industrial applications such as the methane chlorination process, etc. Nevertheless, challenges in the regulation of radical generation and reaction pathways have created substantial obstacles in the development of diversified alkane functionalizations. In recent years, the application of photoredox catalysis has provided exciting opportunities for alkane C-H functionalization under extremely mild conditions to trigger HAT processes and achieve radical-mediated functionalizations in a more selective manner. Considerable efforts have been devoted to building more efficient and cost-effective photocatalytic systems for sustainable transformations. In this perspective, we highlight the recent development of photocatalytic systems and provide our views on current challenges and future opportunities in this field.

Controllable C-H Alkylation of Polyethers via Iron Photocatalysis

The efficient conversion of a C-H bond in the polyether chain to other functional groups provides great opportunities for development of novel applications in many research fields. However, this field is quite underdeveloped due to the key challenge on controlling the selectivity of the C-H bond functionalization over the chain cleavage. In this work, we report a controllable C-H bond alkylation of polyethers under mild conditions via photoinduced iron catalysis. The level of functionalization could be controlled by using different amounts of alkenes and various reaction times, while the molecular weight distributions were maintained narrow. A broad scope of electron-deficient alkenes containing nitrile, ester, epoxide, terminal alkynyl, 2,5-dioxotetrafuranyl, and 2,5-dioxopyrrolidinyl groups could be utilized to functionalize the different polyethers with great efficiencies. The potential applications of the modified polyethylene glycols and polyethylene oxides were explored by the preparation of novel hydrogels and solid-state electrolytes with enhancement of lithium ion conductivities. Moreover, the density functional theory calculation disclosed the plausible mechanism and explained the high selectivity for the C-H alkylation.

Expanding monomer scope and enabling post-modification in photocontrolled radical ring-opening polymerization of vinylcyclopropanes by an iodine transfer strategy

Visible light-driven iodine transfer polymerization provides efficient and unique access to novel poly(vinylcyclopropanes) with enhanced material properties.

The challenges of controlling polymer synthesis at the molecular and macromolecular level

In this Perspective, we outline advances and challenges in controlling the structure of polymers at various size regimes in the context of structural features such as molecular weight distribution, end groups, architecture, composition and sequence.

Donor modification of thermally activated delayed fluorescence photosensitizers for organocatalyzed atom transfer radical polymerization

TADF donor-acceptor conjugates were applied as photosensitizers for organocatalyzed organic atom transfer radical polymerization. A donor-modification strategy was found to dramatically improve the control over the polymerization.

Degradable Vinyl Random Copolymers via Photocontrolled Radical Ring-Opening Cascade Copolymerization

Degradable vinyl polymers by radical ring-opening polymerization are promising solutions to the challenges caused by non-degradable vinyl plastics. However, achieving even distributions of labile functional groups in the backbone of degradable vinyl polymers remains challenging. Herein, we report a photocatalytic approach to degradable vinyl random copolymers via radical ring-opening cascade copolymerization (rROCCP). The rROCCP of macrocyclic allylic sulfones and acrylates or acrylamides mediated by visible light at ambient temperature achieved near-unity comonomer reactivity ratios over the entire range of the feed compositions. Experimental and computational evidence revealed an unusual reversible inhibition of chain propagation by in situ generated sulfur dioxide (SO2), which was successfully overcome by reducing the solubility of SO2. This study provides a powerful approach to degradable vinyl random copolymers with comparable material properties to non-degradable vinyl polymers.

Site-Selective Acceptorless Dehydrogenation of Aliphatics Enabled by Organophotoredox/Cobalt Dual Catalysis

The value of catalytic dehydrogenation of aliphatics (CDA) in organic synthesis has remained largely underexplored. Known homogeneous CDA systems often require the use of sacrificial hydrogen acceptors (or oxidants), precious metal catalysts, and harsh reaction conditions, thus limiting most existing methods to dehydrogenation of non- or low-functionalized alkanes. Here we describe a visible-light-driven, dual-catalyst system consisting of inexpensive organophotoredox and base-metal catalysts for room-temperature, acceptorless-CDA (Al-CDA). Initiated by photoexited 2-chloroanthraquinone, the process involves H atom transfer (HAT) of aliphatics to form alkyl radicals, which then react with cobaloxime to produce olefins and H₂. This operationally simple method enables direct dehydrogenation of readily available chemical feedstocks to diversely functionalized olefins. For example, we demonstrate, for the first time, the oxidant-free desaturation of thioethers and amides to alkenyl sulfides and enamides, respectively. Moreover, the system's exceptional site selectivity and functional group tolerance are illustrated by late-stage dehydrogenation and synthesis of 14 biologically relevant molecules and pharmaceutical ingredients. Mechanistic studies have revealed a dual HAT process and provided insights into the origin of reactivity and site selectivity.

Direct Photocatalyzed Hydrogen Atom Transfer (HAT) for Aliphatic C-H Bonds Elaboration

Direct photocatalyzed hydrogen atom transfer (d-HAT) can be considered a method of choice for the elaboration of aliphatic C–H bonds. In this manifold, a photocatalyst (PC_HAT) exploits the energy of a photon to trigger the homolytic cleavage of such bonds in organic compounds. Selective C–H bond elaboration may be achieved by a judicious choice of the hydrogen abstractor (key parameters are the electronic character and the molecular structure), as well as reaction additives. Different are the classes of PCs_HAT available, including aromatic ketones, xanthene dyes (Eosin Y), polyoxometalates, uranyl salts, a metal-oxo porphyrin and a tris(amino)cyclopropenium radical dication. The processes (mainly C–C bond formation) are in most cases carried out under mild conditions with the help of visible light. The aim of this review is to offer a comprehensive survey of the synthetic applications of photocatalyzed d-HAT.

Photopolymerization performed under dark conditions using long-stored electrons in carbon nitride

In nature, the chemical energy and electrons stored in ATP and NADPH generated during irradiation can facilitate biochemical reactions under dark conditions. However, in artificial photoreaction systems, it is still very difficult to perform photoreactions under dark conditions due to the fact that the photogenerated charge pairs can recombine immediately upon ceasing the irradiation. Preventing the recombination of photogenerated charge pairs still constitutes a major challenge at present. Here, it is reported that functionalized carbon nitride nanomaterials having many heptazine rings with a positive charge distribution, which can tightly trap photogenerated electrons, efficiently prevent the recombination of photogenerated charges. These stored charges are exceedingly long-lived (up to months) and can drive photopolymerization without light irradiation, even after one month. The system introduced here demonstrates a new approach for storing light energy as long-lived radicals, enabling photoreactions under dark conditions.

Conjugated Cross-linked Phenothiazines as Green or Red Light Heterogeneous Photocatalysts for Copper-Catalyzed Atom Transfer Radical Polymerization

Using the power of light to drive controlled radical polymerizations has provided significant advances in synthesis of well-defined polymers. Photoinduced atom transfer radical polymerization (ATRP) systems often employ UV light to regenerate copper activator species to mediate the polymerization. Taking full advantage of long-wavelength visible light for ATRP would require developing appropriate photocatalytic systems that engage in photoinduced electron transfer processes with the ATRP components to generate activating species. Herein, we developed conjugated microporous polymers (CMP) as heterogeneous photocatalysts to exploit the power of visible light in promoting copper-catalyzed ATRP. The photocatalyst was designed by cross-linking phenothiazine (PTZ) as a photoactive core in the presence of dimethoxybenzene as a cross-linker via the Friedel-Crafts reaction. The resulting PTZ-CMP network showed photoactivity in the visible region due to the extended conjugation throughout the network because of the aromatic groups connecting the PTZ units. Therefore, photoinduced copper-catalyzed ATRP was performed with CMPs that regenerated activator species under green or red light irradiation to start the ATRP process. This resulted in efficient polymerization of acrylate and methacrylate monomers with high conversion and well-controlled molecular weight. The heterogeneous nature of the photocatalyst enabled easy separation and efficient reusability in subsequent polymerizations.

Oxidation of the inert sp3 C-H bonds of tetrahydroisoquinolines through C-H activation relay (CHAR): construction of functionalized isoquinolin-1-ones

A TBN/O₂-initiated oxidation of the relatively inert 3,4-C-H bonds of THIQs was accomplished, in which the existence of an α-phosphoric ester group is crucial to enable dioxygen trapping and intramolecular HAT (C-H activation relay, CHAR), realizing the synthesis of a series of isoquinolin-1-ones in high yields. The mechanistic study confirmed that the formation of the 3,4-double bond is mediated by the CHAR process. This work provides a new strategy to achieve remote C-H bond activation.

Daylight-activated fumigant detoxifying nanofibrous membrane based on thiol-ene click chemistry

Daylight-activated detoxifying nanofibrous membranes (LDNMs) are fabricated by grafting benzophenone-3,3',4,4'-tetracarboxylic dianhydride (BD) and biological thiols successively on poly(vinyl alcohol-co-ethylene) (EVOH) nanofibrous membrane. Taking the merits of photoactivity of BD, high-reactivity of biological thiols, and high specific surface area and porosity of the nanofibrous membrane, 1,3-dichloropropene (1,3-D) can be efficiently detoxified on the LDNMs under daylight irradiation via a thiol-ene click reaction. The detoxification function of the LDNMs is "switched on" by light irradiation and continues by following a cascade of chemical attacks of thiyl radicals formed during the photoexcitation process. The resultant LDNMs present rapid detoxification rate (i.e., t1/2 =~30 min) and massive detoxification amount (i.e., ~12 mg/g) against 1,3-D vapor under ambient conditions. More importantly, the LDNMs perform a detoxification tailing effect after moving the light-irradiated membrane to a dark environment, thus ensuring the protective function in the absence of sufficient light sources. The detoxification property of the LDNMs in an outdoor environment with sunlight irradiation shows comparable results to the lab-scale outcomes, enabling them to serve as innovative materials for personal protective equipment in practical applications. The successful fabrication of LDNMs may inspire new insights into the design of protective materials providing aggressive protection.

Reflection on the Matyjaszewski Lab Webinar Series and the Rise of Webinars in Polymer Chemistry

Webinar series are helping our community of polymer scientists to stay engaged and connected, despite the cancellation of in-person meetings and the periodic closure of laboratories to contain the spread of the coronavirus pandemic. The sustainable and inclusive character of these virtual events make them valuable learning and networking opportunities. As organizers of the Matyjaszewski Lab Webinar Series, we share herein our experience, highlighting the benefits of virtual meetings and providing a short guide for webinar organizers. Researchers, particularly young scientists, are encouraged to organize such virtual events to broaden their skills and strengthen their professional network.

Light-intensity switch enabled nonsynchronous growth of fluorinated raspberry-like nanoparticles

Raspberry-like (RB) nanoparticles hold potential for diverse applications due to their hierarchical morphology. Here we developed a novel tandem synthetic approach of nonsynchronous growth based on photo-mediated reversible-deactivation radical polymerization, enabling simple, efficient and bottom-up synthesis of RB nanoparticles of uniform sizes at quantitative conversions of fluorinated monomers. Chain transfer agents of different chain lengths, concentrations and chemical compositions were varied to tune the diameter of RB particles. Importantly, fluorinated RB nanoparticles obtained with this method allow facile post modifications via both covalent bond formation and intermolecular physical interactions without disrupting the RB morphology. The facile nature of this method and versatility of the obtained fluorinated RB materials open new opportunities for the development of functional materials using nanoparticles.