CO2 Hydrogenation to Formate and Formic Acid by Bimetallic Palladium-Copper Hydride Clusters

Reverse water-gas shift catalyzed by RhnVO3,4- (n = 3-7) cluster anions under variable temperatures

A fundamental understanding of the exact structural characteristics and reaction mechanisms of interface active sites is vital to engineering an energetic metal-support boundary in heterogeneous catalysis. Herein, benefiting from a newly developed high-temperature ion trap reactor, the reverse water-gas shift (RWGS) (CO2 + H2 → CO + H2O) catalyzed by a series of compositionally and structurally well-defined RhnVO3,4- (n = 3-7) clusters were identified under variable temperatures (298-773 K). It is discovered that the Rh5-7VO3,4- clusters can function more effectively to drive RWGS at relatively low temperatures. The experimentally observed size-dependent catalytic behavior was rationalized by quantum-chemical calculations; the framework of RhnVO3,4- is constructed by depositing the Rhn clusters on the VO3,4 "support", and a sandwiched base-acid-base [Rhout--Rhin+-VO3,4-; Rhout and Rhin represent the outer and inner Rh atoms, respectively] feature in Rh5-7VO3,4- governs the adsorption and activation of reactants as well as the facile desorption of the products. In contrast, isolated Rh5-7- clusters without the electronic modification of the VO3,4 "support" can only catalyze RWGS under relatively high-temperature conditions.

Machine Learning for Experimental Reactivity of a Set of Metal Clusters toward C-H Activation

Understanding the mechanisms of C-H activation of alkanes is a very important research topic. The reactions of metal clusters with alkanes have been extensively studied to reveal the electronic features governing C-H activation, while the experimental cluster reactivity was qualitatively interpreted case by case in the literature. Herein, we prepared and mass-selected over 100 rhodium-based clusters (RhxVyOz- and RhxCoyOz-) to react with light alkanes, enabling the determination of reaction rate constants spanning six orders of magnitude. A satisfactory model being able to quantitatively describe the rate data in terms of multiple cluster electronic features (average electron occupancy of valence s orbitals, the minimum natural charge on the metal atom, cluster polarizability, and energy gap involved in the agostic interaction) has been constructed through a machine learning approach. This study demonstrates that the general mechanisms governing the very important process of C-H activation by diverse metal centers can be discovered by interpreting experimental data with artificial intelligence.

Spectroscopic Characterization of Thermal Methane Activation by Lewis-Acid-Base Pair in a Gas-Phase Metal Nitride Anion Ta2N3. Chemphyschem 2024;25:e202400116. [PMID: 38380870 DOI: 10.1002/cphc.202400116] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Activation and transformation of methane is one of the "holy grails" in catalysis. Understanding the nature of active sites and mechanistic details via spectroscopic characterization of the reactive sites and key intermediates is of great challenge but crucial for the development of novel strategies for methane transformation. Herein, by employing photoelectron velocity-map imaging (PEVMI) spectroscopy in conjunction with quantum chemistry calculations, the Lewis acid-base pair (LABP) of [Taδ+-Nδ-] unit in Ta2N3 - acting as an active center to accomplish the heterolytic cleavage of C-H bond in CH4 has been confirmed by direct characterization of the reactant ion Ta2N3 - and the CH4-adduct intermediate Ta2N3CH4 -. Two active vibrational modes for the reactant (Ta2N3 -) and four active vibrational modes for the intermediate (Ta2N3CH4 -) were observed from the vibrationally resolved PEVMI spectra, which unequivocally determined the structure of Ta2N3 - and Ta2N3CH4 -. Upon heating, the LABP intermediate (Ta2N3CH4 -) containing the NH and Ta-CH3 unit can undergo the processes of C-N coupling and dehydrogenation to form the product with an adsorbed HCN molecule.

The superiority of Pd2+ in CO2 hydrogenation to formic acid

The hydrogenation of CO2 to formic acid is an essential subject since formic acid is a promising hydrogen storage material and a valuable commodity chemical. In this study, we report for the first time the hydrogenation of CO2 to formic acid catalyzed by a Pd2+ catalyst, Pd-V/AC-air. The catalyst exhibited extraordinary catalytic activity toward the hydrogenation of CO2 to formic acid. The TON and TOF are up to 4790 and 2825 h-1, respectively, representing the top level among reported heterogeneous Pd catalysts. By combining a study of first-principles density functional theory with experimental results, the superiority of Pd2+ over Pd0 was confirmed. Furthermore, the presence of V modified the electronic state of Pd2+, thus promoting the reaction. This study reports the effect of metal valence and electronic state on the catalytic performance for the first time and provides a new prospect for the design of an efficient heterogeneous catalyst for the hydrogenation of CO2 to formic acid.

Vibrational wave-packet dynamics of the silver pentamer probed by femtosecond NeNePo spectroscopy

Vibrational wave-packet dynamics on the ground electronic state of the neutral silver pentamer (Ag5) are studied by femtosecond (fs) pump-probe spectroscopy using the 'negative ion - to neutral - to positive ion' (NeNePo) excitation scheme. A vibrational wave packet is prepared on the 2A1 state of Ag5via photodetachment of mass-selected, cryogenically cooled Ag5- anions using a fs pump pulse. The temporal evolution of the vibrational wave packet is then probed by an ultrafast probe pulse via resonant multiphoton ionization to Ag5+. Frequency analysis of the fs NeNePo transients for pump-probe delay times from 0.2 to 8 ps reveals three primary beating frequencies at 157 cm-1, 101 cm-1 and 56 cm-1 as well as four weaker features. A comparison of these experimentally obtained beating frequencies to harmonic normal mode frequencies calculated from electronic structure calculations confirms that Ag5 in the gas phase adopts a planar trapezoidal geometry, similar to that previously observed in solid argon. The dependence of the ionization yield on the laser polarization indicates a s-d wave electron photodetachment from a 'p-type' occupied molecular orbital of Ag5. Franck-Condon analysis shows that both processes, photodetachment and subsequent photoionization determine the beating frequencies probed in the time-dependent cation yield. The present study extends the applicability of fs NeNePo spectroscopy to characterize the vibrational spectra in the far-IR frequency range in the absence of perturbations from a medium or a messenger atom to mass-selected neutral metal clusters with more than three atoms in the ground electronic states.

CO Oxidation Promoted by NO Adsorption on RhMn2O3- Cluster Anions

CO oxidation represents an important model reaction in the gas phase to provide a clear structure-reactivity relationship in related heterogeneous catalysis. Herein, in combination with mass spectrometry experiments and quantum-chemical calculations, we identified that the RhMn2O3- cluster cannot oxidize CO into gas-phase CO2 at room temperature, while the NO preadsorbed products RhMn2O3-[(NO)1,2] are highly reactive in CO oxidation. This discovery is helpful to get a fundamental understanding on the reaction behavior in real-world three-way catalytic conditions where different kinds of reactants coexist. Theoretical calculations were performed to rationalize the crucial roles of preadsorbed NO where the strongly attached NO on the Rh atom can greatly stabilize the products RhMn2O2-[(NO)1,2] during CO oxidation and at the same time works together with the Rh atom to store electrons that stay originally in the attached CO2- unit. The leading result is that the desorption of CO2, which is the rate-determining step of CO oxidation by RhMn2O3-, can be greatly facilitated on the reactions of RhMn2O3-[(NO)1,2] with CO.

Solar driven CO2 hydrogenation to HCOOH on (TiO2)n (n = 1-6) atomic clusters

Artificial photosynthesis is a crucial reaction that addresses energy and environmental challenges by converting CO2 into fuels and value-added chemicals. However, efficient catalytic activity using earth-abundant materials can be challenging due to intrinsic limitations. Herein, we explore neutral (TiO2)n (n = 1-6) atomic clusters for CO2 hydrogenation via comprehensive ab initio calculations combined with time-dependent functional theory. Our results show that these (TiO2)n clusters exhibit outstanding thermodynamic stabilities and decent surficial activities for CO2 activation and H2 dissociation, both of which possess kinetic barriers down to 0-0.74 eV. We establish a relationship between the binding strength of *CO2 species and electron characterization for these (TiO2)n clusters. These clusters, which have a wide energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccpied molecular orbital (LUMO) that allows them to harvest the solar light in the ultraviolet regime, enabling efficient catalysis for driving the catalysis of CO2 conversion. They provide exclusive reaction channels and high selectivity for yielding HCOOH products via the carboxyl mechanism, involving the kinetic barrier of the limiting step of 0.74-1.25 eV. We also investigated the substrate effect on supported (TiO2)n clusters, with non-metallic substrates featuring inert surfaces serving as suitable options for anchoring (TiO2)n clusters while preserving their intrinsic activity and selectivity. These computational results have significant implications not only for meeting energy demands but also for mitigating carbon emissions by utilizing CO2 as an alternative feedstock rather than considering it solely as a greenhouse gas.

Activation of Methane by Rhodium Clusters on a Model Support C20H10

Supported metals represent an important family of catalysts for the transformation of the most stable alkane, methane, under mild conditions. Here, using state-of-the-art mass spectrometry coupled with a newly designed double ion trap reactor that can run at high temperatures, we successfully immobilize a series of Rhn- (n = 4-8) cluster anions on a model support C20H10. Reactivity measurements at room temperature identify a significantly enhanced performance of large-sized Rh7,8C20H10- toward methane activation compared to that of free Rh7,8-. The "support" acting as an "electron sponge" is emphasized as the key factor to improve the reactivity of large-sized clusters, for which the high electron-withdrawing capability of C20H10 dramatically shifts the active Rh atom from the apex position in free Rh7- to the edge position in "supported" Rh7- to enhance CH4 adsorption, while the flexibility of C20H10 to release electrons further promotes subsequent C-H activation. The Rh atoms in direct contact with the support serve as electron-relay stations for electron transfer between C20H10 and the active Rh atom. This work not only establishes a novel approach to prepare and measure the reactivity of "supported" metal clusters in isolated gas phase but provides useful atomic-scale insights for understanding the chemical behavior of carbon (e.g., graphene)-supported metals in heterogeneous catalysis.

Reaction Mechanism and Kinetics for the Selective Hydrogenation of Carbon Dioxide to Formic Acid and Methanol over the [Cu2]0,±1 Dimer

With the rapid growth of industrialization, deforestation, and burning of fossil fuels, undeniably there has been an incredible escalation of the CO2 concentration in the atmosphere. In order to mitigate the problem, the capture and utilization of CO2 in different value-added chemicals have thus remained topics of concerned research for more than a decade. Accordingly, we have performed molecular -level catalytic hydrogenation of CO2 to formic acid using bare [Cu2]0,±1 dimers as catalysts. The entire investigation has been performed using a density functional theory (DFT) method employing the Perdew-Burke-Ernzerhof (PBE) functional with the def2TZVPP basis set to explore the different possible routes and efficiency of the catalysts. Results reveal the feasibility of H2 dissociation on all three Cu2, Cu2+, and Cu2- dimers. The negatively charged hydride formed during H2 dissociation on Cu2 and Cu2+ dimers facilitates the formation of the HCOO* intermediate over COOH*, thereby providing product selectivity for HCOOH above CO. However, the reaction on the Cu2- dimer forms both HCOO* and COOH* intermediates, but HCOO*, being kinetically more favorable, results in HCOOH production. The free-energy change suggests that the complete reaction on Cu2 and Cu2+ dimers forms a stable product compared to the Cu2- dimer. Furthermore, H3COH production is studied using the title catalysts via the obtained HCOOH* intermediate from the reaction channel. Transition state theory (TST) has been considered to evaluate the rate constants for each step of the reaction. Overall results suggest Cu2 to be better compared to Cu2+ and Cu2- dimers for HCOOH formation and Cu2+ over Cu2 and Cu2- dimers to be more efficient for H3COH formation. This work opens the way for further investigation of the reaction mechanism and development of an efficient catalyst for CO2 hydrogenation.

Operando Mössbauer Spectroscopic Tracking the Metastable State of Atomically Dispersed Tin in Copper Oxide for Selective CO2 Electroreduction

Metastable state is the most active catalyst state that dictates the overall catalytic performance and rules of catalytic behaviors; however, identification and stabilization of the metastable state of catalyst are still highly challenging due to the continuous evolution of catalytic sites during the reaction process. In this work, operando 119Sn Mössbauer measurements and theoretical simulations were performed to track and identify the metastable state of single-atom Sn in copper oxide (Sn1-CuO) for highly selective CO2 electroreduction to CO. A maximum CO Faradaic efficiency of around 98% at -0.8 V (vs. RHE) over Sn1-CuO was achieved at an optimized Sn loading of 5.25 wt. %. Operando Mössbauer spectroscopy clearly identified the dynamic evolution of atomically dispersed Sn4+ sites in the CuO matrix that enabled the in situ transformation of Sn4+-O4-Cu2+ to a metastable state Sn4+-O3-Cu+ under CO2RR conditions. In combination with quasi in situ X-ray photoelectron spectroscopy, operando Raman and attenuated total reflectance surface enhanced infrared absorption spectroscopies, the promoted desorption of *CO over the Sn4+-O3 stabilized adjacent Cu+ site was evidenced. In addition, density functional theory calculations further verified that the in situ construction of Sn4+-O3-Cu+ as the true catalytic site altered the reaction path via modifying the adsorption configuration of the *COOH intermediate, which effectively reduced the reaction free energy required for the hydrogenation of CO2 and the desorption of the *CO, thereby greatly facilitating the CO2-to-CO conversion. This work provides a fundamental insight into the role of single Sn atoms on in situ tuning the electronic structure of Cu-based catalysts, which may pave the way for the development of efficient catalysts for high-selectivity CO2 electroreduction.

Coupling of N2 and O2 in the Gas Phase to Synthesize Nitric Oxide at Room Temperature: A Zeldovich-Like Strategy

Dinitrogen (N2) activation and its chemical transformations are some of the most challenging topics in chemistry. Herein, we report that heteronuclear metal anions AuNbBO- can mediate the direct coupling of N2 and O2 to generate NO molecules. N2 first forms the nondissociative adsorption product AuNbBON2- on AuNbBO-. In the following reactions with two O2 molecules, two NO molecules are gradually released, with the formation of AuNbBO2N- and AuNbBO3-. In the reaction with the first O2, the generated nitrene radical (N••-) originating from the dissociated N2, induces the activation of O2. Subsequently, the second O2 is anchored and forms a superoxide radical (O2•-); this radical attacks the other N atom to form an N-O bond, releasing the second NO. The N••- and O2•- radicals play key roles in the reactions. The mechanism adopted in this direct oxidation of N2 by O2 to NO can be labeled as a Zeldovich-like mechanism.

Metal Effect on Cationic [Cp2MH]+ (M = Group 4 and 5)-Mediated CO2 Hydrogenation in the Gas Phase

Effective CO2 hydrogenation has recently attracted quite some attention for producing more valuable chemical oxygenates (such as methanol, formate) in mild conditions. However, the influence of the metal center on the CO2 activation remains unclear. First, electrospray ionization mass spectrometry (ESI-MS) was employed to explore the direct CO2 hydrogenation to formic acid mediated by [Cp2MH]+ (M = Zr, Hf) in the gas phase at room temperature. The key formate intermediate [Cp2M(O2CH)]+ (M = Zr, Hf) was confirmed by traveling wave ion mobility spectrometry (TWIMS). Second, to gain insights into the metal effect, the CO2 hydrogenation process involving Group 4 (i.e., Ti, Zr, Hf) transition metals was calculated along with Group 5 (i.e., V, Nb, Ta) by density functional theory (DFT) methods. The CO2 insertion process was found to be the rate-limiting step. For [Cp2TiH]+, [Cp2ZrH]+, [Cp2HfH]+, [Cp2VH]+, [Cp2NbH]+, and [Cp2TaH]+, the barriers are +7.7, +6.5, +5.9, +9.2, +8.0, and +6.3 kcal/mol, respectively. [Cp2HfH]+-mediated CO2 hydrogenation occurs the most rapidly, as revealed by MS. According to the orbital analysis on the CO2 insertion transition state, the electron-deficient metal center resulting in a low-lying lowest unoccupied molecular orbital (LUMO) could interact more favorably with the π bond of deformed CO2, which was also consistent with the natural bond orbital (NBO) results. Last but not the least, NBO charges on the metal centers were found to correlate linearly well with the CO2 insertion barriers rather than hydride affinity. Thus, the reactivity of different metal hydride complexes with CO2 to produce a formate could be estimated by the NBO charge on metals. Our findings might provide a series of candidates for the catalyst as well as guidance for catalyst design in mild CO2 hydrogenation.

Selective Reduction of NO into N2 Catalyzed by Rh1-Doped Cluster Anions RhCe2O3-5. J Am Chem Soc 2023;145:18658-18667. [PMID: 37572057 DOI: 10.1021/jacs.3c06565]

Catalytic conversion of toxic nitrogen oxide (NO) and carbon monoxide (CO) into nitrogen (N2) and carbon dioxide (CO2) is imperative under the weight of the increasingly stringent emission regulations, while a fundamental understanding of the nature of the active site to selectively drive N2 generation is elusive. Herein, in combination with state-of-the-art mass-spectrometric experiments and quantum-chemical calculations, we demonstrated that the rhodium-cerium oxide clusters RhCe2O3-5- can catalytically drive NO reduction by CO and give rise to N2 and CO2. This finding represents a sharp improvement in cluster science where N2O is commonly produced in the rarely established examples of catalytic NO reduction mediated with gas-phase clusters. We demonstrated the importance of the unique chemical environment in the RhCe2O3- cluster to guide the substantially improved N2 selectivity: a triatomic Lewis "acid-base-acid" Ceδ+-Rhδ--Ceδ+ site is proposed to strongly adsorb two NO molecules as well as the N2O intermediate that is attached on the Rh atom and can facilely dissociate to form N2 assisted by both Ce atoms.

Activation of Dinitrogen Promoted by Adsorption of C6H6 on Fe2VC- Cluster Anions

The introduction of organic ligands is one of the effective strategies to improve the stability and reactivity of metal clusters. Herein, the enhanced reactivity of benzene-ligated cluster anions Fe₂VC(C₆H₆)^- with respect to naked Fe₂VC^- is identified. Structural characterization suggests that C₆H₆ is molecularly bound to the dual metal site in Fe₂VC(C₆H₆)^-. Mechanistic details reveal that the cleavage of N≡N is feasible in Fe₂VC(C₆H₆)^-/N₂ but hindered by an overall positive barrier in the Fe₂VC^-/N₂ system. Further analysis discloses that the ligated C₆H₆ regulates the compositions and energy levels of the active orbitals of the metal clusters. More importantly, C₆H₆ serves as an electron reservoir for the reduction of N₂ to lower the crucial energy barrier of N≡N splitting. This work demonstrates that the flexibility of C₆H₆ in terms of withdrawing and donating electrons is crucial to regulating the electronic structures of the metal cluster and enhancing the reactivity.

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Molecular Anions Perspective

This Perspective attempts to shed light on developments in the theoretical and experimental study of molecular anions highlighting more recent workers in the field. The species I discuss include (i) valence-bound (singly and multiply charged) anions including atmospheric, catalytic, superhalogen, interfacial, and more; (ii) dipole- and correlation-bound anions including their role as doorways to other states and their appearance "in space", and (iii) metastable anions focusing on tools needed for their theoretical treatment. I also briefly discuss angular distributions of photodetached electrons and their growing utilization in experiments and theory. A recurring theme is the dependence of electron binding energies (EBEs) on the surrounding environment. Some anions that are nonexistent as isolated species evolve to be stable but with small EBEs when weakly solvated (e.g., as in a cluster or at an air-solvent interface). Others existing in isolation only as metastable species become stable when the underlying molecular framework contains one or more positively charged group (e.g., protonated side chains in a peptide) that generates a stabilizing Coulomb potential. On the other hand, a destabilizing Coulomb potential between/among negative sites in a multiply charged anion decreases the EBEs of each such site and generates a repulsive Coulomb barrier that can affect stability.

Filtration of the preferred catalyst for reverse water-gas shift among Rhn- (n = 3-11) clusters by mass spectrometry under variable temperatures

The key to optimizing energy-consuming catalytic conversions lies in acquiring a fundamental understanding of the nature of the active sites and the mechanisms of elementary steps at an atomically precise level, while it is challenging to capture the crucial step that determines the overall temperature of a real-life catalytic reaction. Herein, benefiting from a newly-developed high-temperature ion trap reactor, the reverse water-gas shift (CO₂ + H₂ → CO + H₂O) reaction catalyzed by the Rh_n^- (n = 3-11) clusters was investigated under variable temperatures (298-783 K) and the critical temperature that each elementary step (Rh_n^- + CO₂ and Rh_nO^- + H₂) requires to take place was identified. The Rh₄^- cluster strikingly surpasses other Rh_n^- clusters to drive the catalysis at a mild starting temperature (∼440 K). This finding represents the first example that a specifically sized cluster catalyst that works under an optimum condition can be accurately filtered by using state-of-the-art mass spectrometric experiments and rationalized by quantum-chemical calculations.

Room-Temperature Conversion of Methane to Methanediol by [FeO2]. J Phys Chem Lett 2023;14:1633-1640. [PMID: 36752636 DOI: 10.1021/acs.jpclett.2c03786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Inspired by the activities of P-450 enzyme and Rieske oxygenases in nature, in which the high-valent Fe-oxo complexes play a key role for oxidation of alkanes, the oxidation process of methane by the high-valent iron oxide cation [FeO₂]⁺ has been explored by using Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometry complemented by high-level quantum chemical calculations. In contrast to the previously reported [FeO]⁺/CH₄ and [Fe(O)OH]⁺/CH₄ systems, which afford [FeOH]⁺ as the main product, the generation of Fe⁺ dominates the reaction of [FeO₂]⁺ with CH₄. Theoretical calculations suggest a novel "oxygen rebound" pathway for the liberation of methanediol. In particular, the inevitable valence increase of Fe prior to C-H activation is similar to the cytochrome P-450 mediated processes. To our best knowledge, this study provides the first example of methane activation by the high-valent Fe(V)-oxo species in the gas phase, which may thus bridge the gas-phase model and the condensed-phase biosystems.

CO2 hydrogenation to formic acid on Pd-Cu nanoclusters: a DFT study

Carbon dioxide (CO₂) hydrogenation to formic acid is a promising method for the conversion of CO₂ to useful organic products. The interaction of CO₂ with hydrogen (H₂) on Pd_mCu_n (m + n = 4, 8 and 13) clusters to form formic acid (HCOOH) has been explored using density functional theoretical (DFT) calculations. Pd₂Cu₂, Pd₄Cu₄ and 13-atom Pd₁₂Cu clusters are found to be the most stable among all of the Pd_mCu_n (m + n = 4, 8 and 13) clusters with binding energies of -1.75, -2.16 and -2.40 eV per atom, respectively. CO₂ molecules get adsorbed on the Pd₂Cu₂, Pd₄Cu₄ and Pd₁₂Cu clusters in an inverted V-shaped way with adsorption energies of -0.91, -0.96 and -0.44 eV, respectively. The hydrogenation of CO₂ to form formate goes through a unidentate structure that rapidly transforms into the bidentate structure. To determine the transition state structures and minimum energy paths (MEPs) for CO₂ hydrogenation to formic acid, the climbing image nudge elastic band (CI-NEB) method has been adopted. The activation barriers for the formation of formic acid from formate on Pd₂Cu₂ and Pd₄Cu₄ are calculated to be 0.79 and 0.68 eV, respectively whereas that on the Pd₁₂Cu cluster is 1.77 eV. The enthalpy for the overall process of CO₂ hydrogenation to formic acid on the Pd₂Cu₂, Pd₄Cu₄ and Pd₁₂Cu clusters are found to be 0.83, 0.48 and 0.63 eV, respectively. Analysis of the density of states (DOS) spectra show that the 4d orbital of Pd, the 3d orbital of Cu, and the 2p orbitals of C and O atoms are involved in the bonding between CO₂ molecules and the Pd₂Cu₂ clusters. The CO₂ adsorption on the Pd_mCu_n (m + n = 4 and 8) clusters has also been explained in terms of the charge density distribution analysis.

Spectroscopic Identification of the Dinitrogen Fixation and Activation by Metal Carbide Cluster Anions PtCn- (n = 4-6)

Nitrogen fixation is confronted with great challenges in the field of chemistry. Herein, we report that single metal carbides PtC_n^- and PtC_nN₂^- (n = 4-6) are indispensable intermediates in the process of nitrogen fixation by mass spectrometry coupled with anionic photoelectron spectroscopy, quantum chemical calculations, and simulated density-of-state spectra. The most stable isomers of these cluster anions are characterized to have linear chain structures. The fixation and activation of dinitrogen are facilitated by the charge transfer from Pt and C_n to N₂. The significance of π back-donation of the 5d orbital of the Pt atom to the antibonding π orbits of N₂ for dinitrogen fixation and activation is discussed in detail. This study not only provides a theoretical basis at the molecular level for the activation of dinitrogen by mononuclear metal carbide clusters but also provides a new paradigm for dinitrogen fixation.

Ga and Zn increase the oxygen affinity of Cu-based catalysts for the CO x hydrogenation according to ab initio atomistic thermodynamics

The direct hydrogenation of CO or CO₂ to methanol, a highly vivid research area in the context of sustainable development, is typically carried out with Cu-based catalysts. Specific elements (so-called promoters) improve the catalytic performance of these systems under a broad range of reaction conditions (from pure CO to pure CO₂). Some of these promoters, such as Ga and Zn, can alloy with Cu and their role remains a matter of debate. In that context, we used periodic DFT calculations on slab models and ab initio thermodynamics to evaluate both metal alloying and surface formation by considering multiple surface facets, different promoter concentrations and spatial distributions as well as adsorption of several species (O*, H*, CO* and ) for different gas phase compositions. Both Ga and Zn form an fcc-alloy with Cu due to the stronger interaction of the promoters with Cu than with themselves. While the Cu-Ga-alloy is more stable than the Cu-Zn-alloy at low promoter concentrations (<25%), further increasing the promoter concentration reverses this trend, due to the unfavoured Ga-Ga-interactions. Under CO₂ hydrogenation conditions, a substantial amount of O* can adsorb onto the alloy surfaces, resulting in partial dealloying and oxidation of the promoters. Therefore, the CO₂ hydrogenation conditions are actually rather oxidising for both Ga and Zn despite the large amount of H₂ present in the feedstock. Thus, the growth of a GaO _x /ZnO _x overlayer is thermodynamically preferred under reaction conditions, enhancing CO₂ adsorption, and this effect is more pronounced for the Cu-Ga-system than for the Cu-Zn-system. In contrast, under CO hydrogenation conditions, fully reduced and alloyed surfaces partially covered with H* and CO* are expected, with mixed CO/CO₂ hydrogenation conditions resulting in a mixture of reduced and oxidised states. This shows that the active atmosphere tunes the preferred state of the catalyst, influencing the catalytic activity and stability, indicating that the still widespread image of a static catalyst under reaction conditions is insufficient to understand the complex interplay of processes taking place on a catalyst surface under reaction conditions, and that dynamic effects must be considered.

Reverse water-gas shift reaction catalyzed by diatomic rhodium anions

The reverse water-gas shift (RWGS, CO₂ + H₂ → CO + H₂O, ΔH₂₉₈ = +0.44 eV) reaction mediated by the diatomic anion Rh₂^- was successfully constructed. The generation of a gas-phase H₂O molecule and ion product [Rh₂(CO)_ads]^- was identified unambiguously at room temperature and the only elementary step that requires extra energy to complete the catalysis is the desorption of CO from [Rh₂(CO)_ads]^-. This experimentally identified Rh₂^- anion represents the first gas-phase species that can drive the RWGS reaction because it is challenging to design effective routes to yield H₂O from CO₂ and H₂. The reactions were performed by using our newly developed double ion trap reactors and characterized by mass spectrometry, photoelectron spectroscopy, and high-level quantum-chemical calculations. We found that the order that the reactants (CO₂ or D₂) were fed into the reactor did not have a pronounced impact on the reactivity and the final product distribution (D₂O and Rh₂CO^-). The atomically precise insights into the key steps to guide the reaction toward the RWGS direction were provided.

Plasma-promoted reactions of the heterobimetallic anions CuNb- with dinitrogen and subsequent reactions with carbon dioxide: formation of C-N bonds

The activation and functionalization of dinitrogen with carbon dioxide into useful chemicals containing C-N bonds are significant research projects but highly challenging. Herein, we report that N₂ molecules are dissociated by heterobimetallic CuNb^- anions assisted by surface plasma radiation, leading to the formation of CuNbN₂^- anions; the CuNbN₂^- anions can further react with CO₂ to generate products NCO^- with one C-N bond and NbO₂NCN^- with two C-N bonds under thermal collision conditions. For the activation of dinitrogen, the plasma atmosphere is conducive to the dissociation of the NN bond, which renders the coupling reactions of N₂ and CO₂ molecules easier to proceed. This is the first report of coupling of N₂ and CO₂ to generate C-N bonds by making good use of the plasma effect to assist in the activation of N₂ molecules. This new strategy with the assistance of plasma provides a practicable route to construct C-N bonds by directly using N₂ and CO₂ at room temperature.

Theoretical Perspective on Operando Spectroscopy of Fluxional Nanocatalysts

Improvements in operando spectroscopy have enabled the catalysis community to investigate the dynamic nature of catalysts under operating conditions with increasing detail. Still, the highly dynamic nature of some catalysts, such as fluxional supported subnano clusters, presents a formidable challenge even for the most state-of-the-art techniques. The reason is that such fluxional catalytic interfaces contain a variety of thermally accessible states. Operando spectroscopies used in catalysis generally fall into two categories: ensemble-based techniques, which provide spectra containing the signals of the entire ensemble of states of the catalyst and are not necessarily dominated by the most active species, and localized techniques, which provide atomistic-level information about the dynamics of active sites in a very small area, which might not include the most active species. Combining many different kinds of techniques can provide detailed insight; however, we propose that effective utilization of specific computational techniques and approaches within the fluxionality paradigm can fill the gap and enable atomistic characterization of the most relevant catalytic sites.

Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO2 Fixation

Merging existing catalysts together as a cascade catalyst may achieve "one-pot" synthesis of complex but functional molecules by simplifying multistep reactions, which is the blueprint of sustainable chemistry with low pollutant emission and consumption of energy and materials only when the smooth mass exchange between different catalysts is ensured. Effective strategies to facilitate the mass exchange between different active centers, which may dominate the final activity of various cascade catalysts, have not been reached until now, even though charged interfaces due to work function driven electron exchange have been widely observed. Here, we successfully constructed mass (reactants and intermediates) exchange paths between Pd/N-doped carbon and MoC/N-doped carbon induced by interfacial electron exchange to trigger the mild and cascade methylation of amines using CO₂ and H₂. Theoretical and experimental results have demonstrated that the mass exchange between electron-rich MoC and electron-deficient Pd could prominently improve the production of N,N-dimethyl tertiary amine, which results in a remarkably high turnover frequency value under mild conditions, outperforming the state-of-the-art catalysts in the literature by a factor of 5.9.

Molecular-level electrocatalytic CO2 reduction reaction mediated by single platinum atoms

The activation and transformation of H₂O and CO₂ mediated by electrons and single Pt atoms is demonstrated at the molecular level. The reaction mechanism is revealed by the synergy of mass spectrometry, photoelectron spectroscopy, and quantum chemical calculations. Specifically, a Pt atom captures an electron and activates H₂O to form a H-Pt-OH^- complex. This complex reacts with CO₂via two different pathways to form formate, where CO₂ is hydrogenated, or to form bicarbonate, where CO₂ is carbonated. The overall formula of this reaction is identical to a typical electrochemical CO₂ reduction reaction on a Pt electrode. Since the reactants are electrons and isolated, single atoms and molecules, we term this reaction a molecular-level electrochemical CO₂ reduction reaction. Mechanistic analysis reveals that the negative charge distribution on the Pt-H and the -OH moieties in H-Pt-OH^- is critical for the hydrogenation and carbonation of CO₂. The realization of the molecular-level CO₂ reduction reaction provides insights into the design of novel catalysts for the electrochemical conversion of CO₂.

Developing Atomically Thin Li1.81H0.19Ti2O5·2H2O Nanosheets for Selective Photocatalytic CO2 Reduction to CO

Solar-driven CO₂ conversion to carbon-based fuels is an attractive approach to alleviate the worsening global climate change and increasing energy issues. However, exploring and designing efficient photocatalysts with excellent activity and stability still remain challenging. Herein, layered Li_1.81H_0.19Ti₂O₅·2H₂O (LHTO) nanosheets were explored as the photocatalyst for photocatalytic CO₂ reduction, and atomically thin LHTO nanosheets with one-unit-cell thickness were successfully constructed for photocatalytic CO₂ reduction. The atomically thin LHTO nanosheets exhibited excellent performance for CO₂ photoreduction to CO, with a yield rate of 4.0 μmol g^-1 h^-1, a selectivity of 93%, and over 25 h photostability, dramatically outperforming the bulk LHTO. The better performance of the atomically thin LHTO nanosheets was experimentally verified to benefit from more sites for CO₂ adsorption, faster electron transfer rate, and a more negative conduction band edge compared with bulk LHTO. This work provided a methodological basis for designing more efficient photocatalytic CO₂ reduction catalysts.

Facile N≡N Bond Cleavage by Anionic Trimetallic Clusters V3-x Tax C4 - (x=0-3): A DFT Study

Activation of N₂ on anionic trimetallic V_3-x Ta_x C₄ ^- (x=0-3) clusters was theoretically studied employing density functional theory. For all studied clusters, initial adsorption of N₂ (end-on) on one of the metal atoms (denoted as Site 1) is transferred to an of end-on: side-on: side-on coordination on three metal atoms, prior to N₂ dissociation. The whole reaction is exothermic and has no global energy barriers, indicating that the dissociation of N₂ is facile under mild conditions. The reaction process can be divided into two processes: N₂ transfer (TRF) and N-N dissociation (DIS). For V-series clusters, which has a V atom on Site 1, the rate-determining step is DIS, while for Ta-series clusters with a Ta on Site 1, TRF may be the rate-determining step or has energy barriers similar to those of DIS. The overall energy barriers for heteronuclear V₂ TaC₄ ^- and VTa₂ C₄ ^- clusters are lower than those for homonuclear V₃ C₄ ^- and Ta₃ C₄ ^- , showing that the doping effect is beneficial for the activation and dissociation of N₂ . In particular, V-Ta₂ C₄ ^- has low energy barriers in both TRF and DIS, and it has the highest N₂ adsorption energy and a high reaction heat release. Therefore, a trimetallic heteronuclear V-series cluster, V-Ta₂ C₄ ^- , is suggested to have high reactivity to N₂ activation, and may serve as a prototype for designing related catalysts at a molecular level.

Dinitrogen Activation by Heteronuclear Metal Carbide Cluster Anions FeTaC2-: A 5d Early and 3d Late Transition Metal Strategy

Cleavage of the strong N≡N bond has long been a great challenge for energy-efficient dinitrogen (N₂) fixation; thus a reasonable design of reactive species to activate N₂ under mild conditions is highly desirable and meaningful. Herein a novel N₂ activation strategy of combining 5d early (E) and 3d late (L) transition metals (TMs) is proposed, which is verified by the facile and complete N≡N cleavage via the polarized Fe-Ta bond in gas-phase cluster FeTaC₂^-. The efficient N≡N cleavage benefits from an electronic-level design of highly strengthened donor-acceptor interactions, in which the 5d-ETM (Ta) mainly pushes electrons from occupied 5d-orbitals to N₂ π*-orbitals while the 3d-LTM (Fe) simultaneously pulls electrons from N₂ σ/π-orbitals to its unoccupied 3d-orbitals. Through employing 5d-ETM and 3d-LTM to play their respective roles, this work provides a new and versatile idea for activating the inert N≡N bond and inspires relevant design of TM-based catalysts.

Bias-Adaptable CO2-to-CO Conversion via Tuning the Binding of Competing Intermediates

CO₂ electroreduction powered by renewable electricity represents a promising method to enclose anthropogenic carbon cycle. Current catalysts display high selectivity toward the desired product only over a narrow potential window due primarily to unoptimized intermediate binding. Here, we report a functional ligand modification strategy in which palladium nanoparticles are encapsulated inside metal-organic frameworks with 2,2'-bipyridine organic linkers to tune intermediate binding and thus to sustain a highly selective CO₂-to-CO conversion over widened potential window. The catalyst exhibits CO faradaic efficiency in excess of 80% over a potential window from -0.3 to -1.2 V and reaches the maxima of 98.2% at -0.8 V. Mechanistic studies show that the 2,2'-bipyridine on Pd surface reduces the binding strength of both *H and *CO, a too strong binding of which leads to competing formate production and CO poison, respectively, and thus enhances the selectivity and stability of CO product.

Screening of transition metal doped copper clusters for CO2 activation

Activation of CO₂ is the first step towards its reduction to more useful chemicals. Here we systematically investigate the CO₂ activation mechanism on Cu₃X (X is a first-row transition metal atom) using density functional theory computations. The CO₂ adsorption energies and the activation mechanisms depend strongly on the selected dopant. The dopant electronegativity, the HOMO-LUMO gap and the overlap of the frontier molecular orbitals control the CO₂ dissociation efficiency. Our calculations reveal that early transition metal-doped (Sc, Ti, V) clusters exhibit a high CO₂ adsorption energy, a low activation barrier for its dissociation, and a facile regeneration of the clusters. Thus, early transition metal-doped copper clusters, particularly Cu₃Sc, may be efficient catalysts for the carbon capture and utilization process.

Ligated aluminum cluster anions, LAln- (n = 1-14, L = N[Si(Me)3]2)

A wide range of low oxidation state aluminum-containing cluster anions, LAln- (n = 1-14, L = N[Si(Me)3]2), were produced via reactions between aluminum cluster anions and hexamethyldisilazane (HMDS). These clusters were identified by mass spectrometry, with a few of them (n = 4, 6, and 7) further characterized by a synergy of anion photoelectron spectroscopy and density functional theory (DFT) based calculations. As compared to a previously reported method which reacts anionic aluminum hydrides with ligands, the direct reactions between aluminum cluster anions and ligands promise a more general synthetic scheme for preparing low oxidation state, ligated aluminum clusters over a large size range. Computations revealed structures in which a methyl-group of the ligand migrated onto the surface of the metal cluster, thereby resulting in "two metal-atom" insertion between Si-CH3 bond.

An air-stable, reusable Ni@Ni(OH)2 nanocatalyst for CO2/bicarbonate hydrogenation to formate

Production of formate via CO2/bicarbonate hydrogenation using cheap metal-based heterogeneous catalysts is attractive. Herein, we report the organometallic synthesis of a foam-like Ni@Ni(OH)2 composite nanomaterial which exhibited remarkable air stability and over 2 times higher catalytic activity than commercial RANEY® Ni catalyst in formate synthesis. Formate generation was achieved with an optimal rate of 6.0 mmol gcat-1 h-1 at 100 °C, a significantly lower operation temperature compared to the 200-260 °C reported in the literature. Deep characterization evidenced that this nanomaterial was made of an amorphous Ni(OH)2 phase covering metallic Ni sites; a core-shell structure which is crucial for the stability of the catalyst. The adsorption of bicarbonates onto the Ni@Ni(OH)2 catalyst was found to be a kinetically relevant step in the reaction, and the Ni-Ni(OH)2 interface was found to be beneficial for both CO2 and H2 activation thanks to a cooperative effect. Our findings emphasize the underestimated potential of Ni-based catalysts in CO2 hydrogenation to formate, indicating a viable strategy to develop stable, cheap metal catalysts for greener catalytic applications.

Catalytic Co-Conversion of CH4 and CO2 Mediated by Rhodium-Titanium Oxide Anions RhTiO2. Angew Chem Int Ed Engl 2021;60:13788-13792. [PMID: 33890352 PMCID: PMC8251526 DOI: 10.1002/anie.202103808]

Catalytic co‐conversion of methane with carbon dioxide to produce syngas (2 H₂+2 CO) involves complicated elementary steps and almost all the elementary reactions are performed at the same high temperature conditions in practical thermocatalysis. Here, we demonstrate by mass spectrometric experiments that RhTiO₂⁻ promotes the co‐conversion of CH₄ and CO₂ to free 2 H₂+CO and an adsorbed CO (CO_ads) at room temperature; the only elementary step that requires the input of external energy is desorption of CO_ads from the RhTiO₂CO⁻ to reform RhTiO₂⁻. This study not only identifies a promising active species for dry (CO₂) reforming of methane to syngas, but also emphasizes the importance of temperature control over elementary steps in practical catalysis, which may significantly alleviate the carbon deposition originating from the pyrolysis of methane.

Activation of Carbon Dioxide by CoCDn- (n = 0-4) Anions

Laser ablation generated CoCD_n^- (n = 0-4) anions were mass selected and then reacted with CO₂ in an ion trap reactor. The reactions were characterized by mass spectrometry and quantum chemical calculations. The experimental results demonstrated that the CoC^- anion can convert CO₂ into CO. In contrast, the bare Co^- anion is inert toward CO₂. Coordinated D ligands can modify the reactivity of CoCD_1-4^- in which CoCD_1-3^- can reduce CO₂ into CO selectively and CoCD₄^- can only adsorb CO₂. The crucial roles of the coordinated C and D ligands to tune the reactivity of CoCD_n^- (n = 0-4) toward CO₂ were rationalized by theoretical calculations. Note that the hydrogenation process that is usually observed in the reactions of gas-phase metal hydrides with CO₂ is completely suppressed for the reactions CoCD_n^- + CO₂. This study provides insights into the molecular-level origin for the observations that CO can be selectively generated from CO₂ catalyzed by cobalt-containing carbides in heterogeneous catalysis.

Surface functionalized highly porous date seed derived activated carbon and MoS2 nanocomposites for hydrogenation of CO2 into formic acid

In recent years, substantial progress has been made towards developing effective catalysts for the hydrogenation of CO₂ into fuels. However, the quest for a robust catalyst with high activity and stability still remains challenging. In this study, we present a cost-effective catalyst composed of MoS₂ nanosheets and functionalized porous date seed-derived activated carbon (f-DSAC) for hydrogenation of CO₂ into formic acid (FA). As-fabricated MoS₂/f-DSAC catalysts were characterized by FE-SEM, XRD, Raman, FT-IR, BET, and CO₂-TPD analyses. At first, bicarbonate (HCO₃^-) was successfully converted into FA with a high yield of 88% at 200 °C for 180 min under 10 bar H₂ atmosphere. A possible reaction pathway for the conversion of HCO₃^- into FA is postulated. The catalyst has demonstrated high activity and long-term stability over five consecutive cycles. Additionally, MoS₂/f-DSAC catalyst was effectively used for the conversion of gaseous CO₂ into FA at 200 °C under 20 bar (CO₂/H₂ = 1:1) over 15 h. The catalyst exhibited a remarkable TOF of 510 h^-1 with very low activation energy of 12 kJ mol^-1, thus enhancing the catalytic conversion rate of CO₂ into FA. Thus, this work demonstrates the MoS₂/f-DSAC nanohybrid system as an efficient non-noble catalyst for converting CO₂ into fuels.

CO2 Activation and Hydrogenation by Palladium Hydride Cluster Anions

Mass spectrometric analysis of the anionic products of interaction between palladium hydride anions, PdH^-, and carbon dioxide, CO₂, in a reaction cell shows an efficient generation of the PdHCO₂^- intermediate and isolated formate product. Multiple isomers of the PdHCO₂^- intermediates are identified by a synergy between negative ion photoelectron spectroscopy and quantum-chemical calculations. It is shown that a direct mechanism, in which the H atom in PdH^- directly activates and hydrogenates CO₂, leads to the formation of the formate product. An indirect mechanism, on the other hand, leads to a stable HPdCO₂^- structure, where CO₂ is chemisorbed onto the Pd atom.

Unveiling the Activity Origin of Iron Nitride as Catalytic Material for Efficient Hydrogenation of CO2 to C2+ Hydrocarbons

Developing efficient catalytic materials and unveiling the active species are significant for selective hydrogenation of CO₂ to C₂₊ hydrocarbons. Fe₂ N@C nanoparticles were reported to exhibit outstanding performance toward selective CO₂ hydrogenation to C₂₊ hydrocarbons (C₂₊ selectivity: 53.96 %; C₂ -C₄ ⁼ selectivity, 31.03 %), outperforming corresponding Fe@C. In situ X-ray diffraction, ex situ Mössbauer and X-ray photoelectron spectra revealed that iron nitrides were in situ converted to highly active iron carbides, which acted as the real active species. Moreover, the combined results of in situ diffuse reflectance infrared Fourier transform spectroscopy and control experiments suggested an in situ formed carbonyl iron-mediated conversion mechanism from iron nitrides to iron carbides.

Hydrogenation of CO2 Promoted by Silicon-Activated H2S: Origin and Implications

Unlike the usual method of CO_x (x = 1, 2) hydrogenation using H₂ directly, H₂S and HSiSH (silicon-activated H₂S) were selected as alternative hydrogen sources in this study for the CO_x hydrogenation reactions. Our results suggest that it is kinetically infeasible for hydrogen in the form of H₂S to transfer to CO_x at low temperatures. However, when HSiSH is employed instead, the title reaction can be achieved. For this approach, the activation of CO₂ is initiated by its interaction with the HSiSH molecule, a reactive species with both a hydridic H^δ− and protonic H^δ+. These active hydrogens are responsible for the successive C-end and O-end activations of CO₂ and hence the final product (HCOOH). This finding represents a good example of an indirect hydrogen source used in CO₂ hydrogenation through reactivity tuned by silicon incorporation, and thus the underlying mechanism will be valuable for the design of similar reactions.

Simultaneous Functionalization of Methane and Carbon Dioxide Mediated by Single Platinum Atomic Anions

Mass spectrometric analysis of the anionic products of interaction among Pt^-, methane, and carbon dioxide shows that the methane activation complex, H₃C-Pt-H^-, reacts with CO₂ to form [H₃C-Pt-H(CO₂)]^-. Two hydrogenation and one C-C bond coupling products are identified as isomers of [H₃C-Pt-H(CO₂)]^- by a synergy between anion photoelectron spectroscopy and quantum chemical calculations. Mechanistic study reveals that both CH₄ and CO₂ are activated by the anionic Pt atom and that the successive depletion of the negative charge on Pt drives the CO₂ insertion into the Pt-H and Pt-C bonds of H₃C-Pt-H^-. This study represents the first example of the simultaneous functionalization of CH₄ and CO₂ mediated by single atomic anions.