On the Nature of C(sp3)-C(sp2) Bond Formation in Nickel-Catalyzed Tertiary Radical Cross-Couplings: A Case Study of Ni/Photoredox Catalytic Cross-Coupling of Alkyl Radicals and Aryl Halides

Trajectory-Based Time-Resolved Mechanism for Benzene Reductive Elimination from Cyclopentadienyl Mo/W Phenyl Hydride Complexes

Calculated potential energy structures and landscapes are very often used to define the sequence of reaction steps in an organometallic reaction mechanism and interpret kinetic isotope effect (KIE) measurements. Underlying most of this structure-to-mechanism translation is the use of statistical rate theories without consideration of atomic/molecular motion. Here we report direct dynamics simulations for an organometallic benzene reductive elimination reaction, where nonstatistical intermediates and dynamic-controlled pathways were identified. Specifically, we report single spin state as well as mixed spin state quasiclassical direct dynamics trajectories in the gas phase and explicit solvent for benzene reductive elimination from Mo and W bridged cyclopentadienyl phenyl hydride complexes ([Me2Si(C5Me4)2]M(H)(Ph), M = Mo and W). Different from the energy landscape mechanistic sequence, the dynamics trajectories revealed that after the benzene C-H bond forming transition state (often called reductive coupling), σ-coordination and π-coordination intermediates are either skipped or circumvented and that there is a direct pathway to forming a spin flipped solvent caged intermediate, which occurs in just a few hundred femtoseconds. Classical molecular dynamics simulations were then used to estimate the lifetime of the caged intermediate, which is between 200 and 400 picoseconds. This indicates that when the η2-π-coordination intermediate is formed, it occurs only after the first formation of the solvent-caged intermediate. This dynamic mechanism intriguingly suggests the possibility that the solvent-caged intermediate rather than a coordination intermediate is responsible (or partially responsible) for the inverse KIE value experimentally measured for W. Additionally, this dynamic mechanism prompted us to calculate the kH/kD KIE value for the C-H bonding forming transition states of Mo and W. Surprisingly, Mo gave a normal value, while W gave an inverse value, albeit small, due to a much later transition state position.

Mechanisms of Photoredox Catalysis Featuring Nickel-Bipyridine Complexes

Metallaphotoredox catalysis can unlock useful pathways for transforming organic reactants into desirable products, largely due to the conversion of photon energy into chemical potential to drive redox and bond transformation processes. Despite the importance of these processes for cross-coupling reactions and other transformations, their mechanistic details are only superficially understood. In this review, we have provided a detailed summary of various photoredox mechanisms that have been proposed to date for Ni-bipyridine (bpy) complexes, focusing separately on photosensitized and direct excitation reaction processes. By highlighting multiple bond transformation pathways and key findings, we depict how photoredox reaction mechanisms, which ultimately define substrate scope, are themselves defined by the ground- and excited-state geometric and electronic structures of key Ni-based intermediates. We further identify knowledge gaps to motivate future mechanistic studies and the development of synergistic research approaches spanning the physical, organic, and inorganic chemistry communities.

Engaging Alkenes in Metallaphotoredox: A Triple Catalytic, Radical Sorting Approach to Olefin-Alcohol Cross-Coupling

Metallaphotoredox cross-coupling is a well-established strategy for generating clinically privileged aliphatic scaffolds via single-electron reactivity. Correspondingly, expanding metallaphotoredox to encompass new C(sp3)-coupling partners could provide entry to a novel, medicinally relevant chemical space. In particular, alkenes are abundant, bench-stable, and capable of versatile C(sp3)-radical reactivity via metal-hydride hydrogen atom transfer (MHAT), although metallaphotoredox methodologies invoking this strategy remain underdeveloped. Importantly, merging MHAT activation with metallaphotoredox could enable the cross-coupling of olefins with feedstock partners such as alcohols, which undergo facile open-shell activation via photocatalysis. Herein, we report the first C(sp3)-C(sp3) coupling of MHAT-activated alkenes with alcohols by performing deoxygenative hydroalkylation via triple cocatalysis. Through synergistic Ir photoredox, Mn MHAT, and Ni radical sorting pathways, this branch-selective protocol pairs diverse olefins and methanol or primary alcohols with remarkable functional group tolerance to enable the rapid construction of complex aliphatic frameworks.

Iridium(III)-catalyzed photoredox cross-coupling of alkyl bromides with trialkyl amines: access to α-alkylated aldehydes

A C(sp3)-C(sp3) cross coupling approach based on an iridium-photocatalytic radical process has been developed enabling the synthesis of various α-alkylated aldehydes from easily available/synthesized alkyl bromides and trialkyl amines under mild photocatalytic conditions. The synthesized aldehydes are also explored as a functional handle for various useful products such as carboxylic acid, alcohol and N-heterocycle synthesis.

Enantioselective Construction of Quaternary Stereocenters via Cooperative Photoredox/Fe/Chiral Primary Amine Triple Catalysis

The catalytic and enantioselective construction of quaternary (all-carbon substituents) stereocenters poses a formidable challenge in organic synthesis due to the hindrance caused by steric factors. One conceptually viable and potentially versatile approach is the coupling of a C-C bond through an outer-sphere mechanism, accompanied by the realization of enantiocontrol through cooperative catalysis; however, examples of such processes are yet to be identified. Herein, we present such a method for creating different compounds with quaternary stereocenters by photoredox/Fe/chiral primary amine triple catalysis. This approach facilitates the connection of an unactivated alkyl source with a tertiary alkyl moiety, which is also rare. The scalable process exhibits mild conditions, does not necessitate the use of a base, and possesses a good functional-group tolerance. Preliminary investigations into the underlying mechanisms have provided valuable insights into the reaction pathway.

Alcohol-alcohol cross-coupling enabled by SH2 radical sorting

Alcohols represent a functional group class with unparalleled abundance and structural diversity. In an era of chemical synthesis that prioritizes reducing time to target and maximizing exploration of chemical space, harnessing these building blocks for carbon-carbon bond-forming reactions is a key goal in organic chemistry. In particular, leveraging a single activation mode to form a new C(sp3)-C(sp3) bond from two alcohol subunits would enable access to an extraordinary level of structural diversity. In this work, we report a nickel radical sorting-mediated cross-alcohol coupling wherein two alcohol fragments are deoxygenated and coupled in one reaction vessel, open to air.

3-Chloropropylbis(catecholato)silicate as a Bifunctional Reagent for the One-Pot Synthesis of Tetrahydroquinolines from o-Bromosulfonamides

Bis(catecholato)silicate salts are easily accessible reagents that can be used to install alkyl fragments through photoredox-enabled cross-coupling. These reagents can incorporate various functional groups including pendant alkyl halides. A halogenated organosilicate reagent was leveraged to develop a one-pot synthesis of tetrahydroquinolines from o-bromosulfonamides, where the bifunctional reagent participates in a nickel/photoredox cross-coupling followed by intramolecular nucleophilic substitution. The functional group tolerance of this cross-coupling strategy allowed for the preparation of a series of substituted tetrahydroquinolines.

A free-radical design featuring an intramolecular migration for a synthetically versatile alkyl-(hetero)arylation of simple olefins

A free-radical approach has enabled the development of a synthetically versatile alkyl-(hetero)arylation of olefins. Alkyl and (hetero)aryl groups were added concurrently to a full suite of mono- to tetrasubstituted simple alkenes (i.e., without requiring directing or electronically activating groups) for the first time. Key advances also included the introduction of synthetically diversifiable alkyl groups featuring different degrees of substitution, good diastereocontrol in both cyclic and acyclic settings, the addition of biologically valuable heteroarenes featuring Lewis basic nitrogen atoms as well as simple benzenes, and the generation of either tertiary or quaternary benzylic centers. The synthetic potential of this transformation was demonstrated by leveraging it as the key step in a concise synthesis of oliceridine, a new painkiller that received FDA approval in 2020.

Nickel-Electrocatalytic Decarboxylative Arylation to Access Quaternary Centers

There is a pressing need, particularly in the field of drug discovery, for general methods that will enable direct coupling of tertiary alkyl fragments to (hetero)aryl halides. Herein a uniquely powerful and simple set of conditions for achieving this transformation with unparalleled generality and chemoselectivity is disclosed. This new protocol is placed in context with other recently reported methods, applied to simplify the routes of known bioactive building blocks molecules, and scaled up in both batch and flow. The role of pyridine additive as well as the mechanism of this reaction are interrogated through Cyclic Voltammetry studies, titration experiments, control reactions with Ni(0) and Ni(II)-complexes, and ligand optimization data. Those studies indicate that the formation of a BINAPNi(0) is minimized and the formation of an active pyridine-stabilized Ni(I) species is sustained during the reaction. Our preliminary mechanistic studies ruled out the involvement of Ni(0) species in this electrochemical cross-coupling, which is mediated by Ni(I) species via a Ni(I)-Ni(II)-Ni(III)-Ni(I) catalytic cycle.

Dual Photoredox/Nickel Catalysis Enables Diastereoselective Synthesis of Multisubstituted γ-Lactams Using Alkyl-GeMe3 as Radical Precursors

Herein, we report a single-step, multicomponent approach to versatile γ-lactams through dual photoredox/nickel-catalyzed dicarbofunctionalization of α,β-unsaturated γ-butyrolactam. This reaction utilized alkyl trimethylgermanium as a radical precursor and acyl chloride as the electrophile, demonstrating remarkable functional group compatibility.

Computational Methods Enable the Prediction of Improved Catalysts for Nickel-Catalyzed Cross-Electrophile Coupling

Cross-electrophile coupling has emerged as an attractive and efficient method for the synthesis of C(sp2)-C(sp3) bonds. These reactions are most often catalyzed by nickel complexes of nitrogenous ligands, especially 2,2'-bipyridines. Precise prediction, selection, and design of optimal ligands remains challenging, despite significant increases in reaction scope and mechanistic understanding. Molecular parameterization and statistical modeling provide a path to the development of improved bipyridine ligands that will enhance the selectivity of existing reactions and broaden the scope of electrophiles that can be coupled. Herein, we describe the generation of a computational ligand library, correlation of observed reaction outcomes with features of the ligands, and the in silico design of improved bipyridine ligands for Ni-catalyzed cross-electrophile coupling. The new nitrogen-substituted ligands display a 5-fold increase in selectivity for product formation versus homodimerization when compared to the current state of the art. This increase in selectivity and yield was general for several cross-electrophile couplings, including the challenging coupling of an aryl chloride with an N-alkylpyridinium salt.

Programmable late-stage functionalization of bridge-substituted bicyclo[1.1.1]pentane bis-boronates

Modular functionalization enables versatile exploration of chemical space and has been broadly applied in structure-activity relationship (SAR) studies of aromatic scaffolds during drug discovery. Recently, the bicyclo[1.1.1]pentane (BCP) motif has increasingly received attention as a bioisosteric replacement of benzene rings due to its ability to improve the physicochemical properties of prospective drug candidates, but studying the SARs of C2-substituted BCPs has been heavily restricted by the need for multistep de novo synthesis of each analogue of interest. Here we report a programmable bis-functionalization strategy to enable late-stage sequential derivatization of BCP bis-boronates, opening up opportunities to explore the SARs of drug candidates possessing multisubstituted BCP motifs. Our approach capitalizes on the inherent chemoselectivity exhibited by BCP bis-boronates, enabling highly selective activation and functionalization of bridgehead (C3)-boronic pinacol esters (Bpin), leaving the C2-Bpin intact and primed for subsequent derivatization. These selective transformations of both BCP bridgehead (C3) and bridge (C2) positions enable access to C1,C2-disubstituted and C1,C2,C3-trisubstituted BCPs that encompass previously unexplored chemical space.

Transition-Metal-Free, Reductive Csp2-Csp3 Bond Constructions via Electrochemically Induced Alkyl Radicals

Construction of the Csp2-Csp3 bond without the aid of transition metal catalysts has been achieved by coupling the electrogenerated alkyl radicals with electron deficient (hetero)arenes in an undivided cell. Simultaneous cathodic reduction of both unactivated alkyl halides and cyanobenzenes under high potential enables radical-radical cross-coupling to deliver alkylarenes in the absence of transition metals. Depending on the coupling partner, the electrogenerated alkyl radicals can also proceed the Minisci-type reaction with N-heteroarenes without redox agents.

Amidative β-Scission of Alcohols Enabled by Dual Catalysis of Photoredox Proton-Coupled Electron Transfer and Inner-Sphere Ni-Nitrenoid Transfer

The photoredox/Ni dual catalysis is an appealing strategy to enable unconventional C-heteroatom bond formation. While significant advances have been achieved using this system, intermolecular C(sp3)-N bond formation has been relatively underdeveloped due to the difficulty in C(sp3)-N reductive elimination. Herein, we present a new mechanistic approach that utilizes dioxazolones as the Ni(II)-nitrenoid precursor to capture carbon-centered radicals by merging proton-coupled electron transfer (PCET) with nickel catalysis, thus forming synthetically versatile N-alkyl amides using alcohols. Based on mechanistic investigations, the involvement of (κ2-N,O)Ni(II)-nitrenoid species was proposed to capture photoredox PCET-induced alkyl radicals, thereby playing a pivotal role to enable the C(sp3)-N bond formation.

One-Pot Synthesis of Cereblon Proteolysis Targeting Chimeras via Photoinduced C(sp2)-C(sp3) Cross Coupling and Amide Formation for Proteolysis Targeting Chimera Library Synthesis

In this study, a one-pot synthesis via photoinduced C(sp2)-C(sp3) coupling followed by amide formation to access proteolysis targeting chimeras (PROTACs) was developed. The described protocol was studied on cereblon (CRBN)-based E3-ligase binders and (+)-JQ-1, a bromodomain inhibitor, to generate BET (bromodomain and extra terminal domain) targeting protein degraders. The generated PROTACs were profiled in vitro and tested for their degradation ability with several potent candidates identified. Upfront, the individual reactions of the one-pot transformation were carefully optimized for CRBN binder functionalization and multiple heterobifunctional linker moieties were designed and synthesized. Separate scopes detailing the C(sp2)-C(sp3) coupling and one-pot PROTAC synthesis are described in this report as well as a library miniaturization study showing the high-throughput compatibility. Overall, the developed protocol provides rapid access to PROTACs in a single process, thereby allowing efficient generation of CRBN-based PROTAC libraries.

Bicyclopentylation of Alcohols with Thianthrenium Reagents

Herein we present the first method for the synthesis of bicyclo[1.1.1]pentyl (BCP) alkyl ethers from alcohols. The reaction uses BCP-thianthrenium reagents and is catalyzed by a dual copper/photoredox catalyst system. Unlike known alkylations of tertiary alcohols via carbocation intermediates, our Cu-mediated radical process circumvents the labile BCP carbocations. The approach demonstrates a broad tolerance for functional groups when applied to primary, secondary, and even tertiary alcohols. In addition, we highlight the utility of this method in late-stage functionalizations of both natural products and pharmaceuticals as well as in the rapid construction of BCP analogs of known pharmaceuticals that would otherwise be difficult to access.

Recent Advances in First-Row Transition Metal-Catalyzed Reductive Coupling Reactions for π-Bond Functionalization and C-Glycosylation

ConspectusEfficient construction of ubiquitous carbon-carbon bonds between two electrophiles has garnered interest in recent decades, particularly if it is mediated by nonprecious, first-row transition metals. Reductive coupling has advantages over traditional cross-coupling by obviating the need for stoichiometric air- and moisture-sensitive organometallic reagents. By harnessing transition metal-catalyzed reductive coupling as a powerful tool, intricate molecular architectures can be readily assembled through the installation of two C-C bonds across π systems (alkenes/alkynes) via reaction with two appropriate electrophiles. Despite advances in reductive alkene difunctionalization, there remains significant potential for the discovery of novel reaction pathways. In this regard, development of reductive protocols that enable the union of challenging alkyl/alkynyl electrophiles in high regio- and chemoselectivity remains a highly sought-after goal.Apart from π-bond functionalization, reductive coupling has found application in carbohydrate chemistry, particularly in the synthesis of valuable C-glycosyl compounds. In this vein, suitable glycosyl donors can be used to generate reactive glycosyl radical intermediates under reductive conditions. Through elaborately designed reactions, these intermediates can be trapped to furnish pharmaceutically relevant glycoconjugates. Consequently, diversification in C-glycosyl compound synthesis using first-row transition metal catalysis holds strong appeal.In this Account, we summarize our efforts in the development of first-row transition metal-catalyzed reductive coupling reactions for applications in alkene/alkyne functionalization and C-glycosylation. We will first discuss the nickel (Ni)-catalyzed reductive difunctionalization of alkenes, aided by an 8-aminoquinoline (AQ) directing auxiliary. Next, we highlight the Ni-catalyzed hydroalkylation of alkenyl amides tethered with a similar AQ-derived directing auxiliary. Lastly, we discuss an efficient synthesis of 1,3-enynes involving site- and stereoselective reductive coupling of terminal alkynes with alkynyl halides and NHPI esters.Beyond alkene dicarbofunctionalization, we extended the paradigm of transition metal-catalyzed reductive coupling toward the construction of C-glycosidic linkages in carbohydrates. By employing an earth-abundant iron (Fe)-based catalyst, we show that useful glycosyl radicals can be generated from glycosyl chlorides under reductive conditions. These intermediates can be captured in C-C bond formation to furnish valuable C-aryl, C-alkenyl, and C-alkynyl glycosyl compounds with high diastereoselectivity. Our Ni-catalyzed multicomponent union of glycosyl chlorides, aryl/alkyl iodides, and isobutyl chloroformate under reductive conditions led to the stereoselective synthesis of C-acyl glycosides. In addition to Fe and Ni, we discovered a Ti-catalyzed/Mn-promoted synthetic route to access C-alkyl and C-alkenyl glycosyl compounds, through the reaction of glycosyl chlorides with electron-deficient alkenes/alkynes. We further developed an electron donor-acceptor (EDA) photoactivation system leveraging decarboxylative and deaminative strategies for C-glycosylation under Ni catalysis. This approach has been demonstrated to selectively activate carboxyl and amino motifs to furnish glycopeptide conjugates. Finally, through two distinct catalytic transformations of bench-stable heteroaryl glycosyl sulfones, we achieved stereodivergent access to both α- and β-anomers of C-aryl glycosides, one of which involves a Ni-catalyzed reductive coupling with aryl iodides.The findings presented in this Account are anticipated to have far-reaching implications beyond our research. We foresee that these results will pave the way for new transformations founded on the concept of reductive coupling, leading to the discovery of novel applications in the future.

Experimental and Computational Studies on Cobalt(I)-Catalyzed Regioselective Allylic Alkylation Reactions

Here, we report the development of cobalt(I)-catalyzed regioselective allylic alkylation reactions of tertiary allyl carbonates with 1,3-dicarbonyl compounds. A family of well-defined tetrahedral cobalt(I) complexes bearing commercially available bidentate bis(phosphine) ligands [(P,P)Co(PPh3 )Cl] are synthesized and explored as catalysts in allylic alkylation reactions. The catalyst [(dppp)Co(PPh3 )Cl] (dppp=1,3-Bis(diphenylphosphino)propane) enables the alkylation of a large variety of tertiary allyl carbonates with high yields and excellent regioselectivity for the branched product. Remarkably, this methodology is selective for the activation of tertiary allyl carbonates even in the presence of secondary allyl carbonates. This contrasts with the selectivity observed in cobalt-catalyzed allylic alkylations enabled by visible light photocatalysis. Mechanistic insights by means of experimental and computational investigations support a Co(I)/Co(III) catalytic cycle.

Nickel/photoredox-catalyzed enantioselective arylation of α-chloro thioesters

The first dual nickel/photoredox-catalyzed enantioselective reductive cross-coupling of racemic α-chloro thioesters with aryl iodides has been developed. This strategy avoids the need for organometallic reagents or stoichiometric metal reductants. This reaction could tolerate a wide range of substrate scope with excellent reactivity and high enantioselectivities (up to 91% ee) to access a variety of chiral α-aryl thioesters. The synthetic utility of the corresponding α-aryl thioesters is demonstrated. Furthermore, we explored the mechanism of such an enantioselective radical cross-coupling process.

Chemoselective Three-Component Geminal Cross Couplings of Dihaloalkanes with Cr Catalysis: Rapid Access to Tertiary and Quaternary Alkanes via a Metal-Carbene Intermediate

Geminal cross couplings using multiple components enable the formation of several different bonds at one site in the building of tertiary and quaternary alkanes. Nevertheless, there are remaining issues of concern-cleavage of two geminal bonds and control of selectivity present challenges. We report here the geminal cross couplings of three components by reactions of dihaloalkanes with organomagnesium and chlorosilanes or alkyl tosylates by Cr catalysis, affording the formation of geminal C-C/C-Si or C-C/C-C bonds in the creation of tertiary and quaternary alkanes. The geminal couplings are catalyzed by low-cost CrCl2 , enabling the sluggishness of competitive Kumada-type side couplings and homocouplings of Grignard reagents, in achieving high chemoselectivity. Experimental and theoretical studies indicate that two geminal C-halide bonds are continuously cleaved by Cr to afford a metal carbene intermediate, which couples with a Grignard reagent, followed by silylation, in the formation of geminal C-C and C-Si bonds via a novel inner-sphere radical coupling mechanism. These three-component geminal cross couplings are value-addition to the synthesis of commercial drugs and bioactive molecules in medicinal chemistry.

Regime Switch in the Dual-Catalyzed Coupling of Alkyl Silicates with Aryl Bromides

Metallaphotoredox catalyzed cross-coupling of an arylbromide (Ar-Br) with an alkyl bis(catecholato)silicate (R-Si⊖ ) has been analyzed in depth using a continuum of analytical techniques (EPR, fluorine NMR, electrochemistry, photophysics) and modeling (micro-kinetics and DFT calculations). These studies converged on the impact of four control parameters consisting in the initial concentrations of the iridium photocatalyst ([Ir]0 ), nickel precatalyst ([Ni]0 ) and silicate ([R-Si⊖ ]0 ) as well as light intensity I0 for an efficient reaction between Ar-Br and R-Si⊖ . More precisely, two regimes were found to be possibly at play. The first one relies on an equimolar consumption of Ar-Br with R-Si⊖ smoothly leading to Ar-R, with no side-product from R-Si⊖ and a second one in which R-Si⊖ is simultaneously coupled to Ar-Br and degraded to R-H. This integrative approach could serve as a case study for the investigation of other metallaphotoredox catalysis manifolds of synthetic significance.

A Paradigm Shift in Catalysis: Electro- and Photomediated Nickel-Catalyzed Cross-Coupling Reactions

ConspectusTransition-metal catalyzed cross-coupling reactions are fundamental reactions in organic chemistry, facilitating strategic bond formations for accessing natural products, organic materials, agrochemicals, and pharmaceuticals. Redox chemistry enables access to elusive cross-coupling mechanisms through single-electron processes as an alternative to classical two-electron strategies predominated by palladium catalysis. The seminal reports of Baran, MacMillan, Doyle, Molander, Weix, Lin, Fu, Reisman, and others in merging redox perturbation (photochemical, electrochemical, and purely chemical) with catalysis are pivotal to the current resurgence and mechanistic understanding of first-row transition metal-based catalysis. The hallmark of this redox platform is the systematic modulation of transition-metal oxidation states by a photoredox catalyst or at a heterogeneous electrode surface. Electrocatalysis and photocatalysis enhance transition metal catalysis' capacity for bond formation through electron- or energy-transfer processes that promote otherwise challenging elementary steps or elusive mechanisms. Cross-coupling conditions promoted by electrocatalysis and photocatalysis are mild, and bond formation proceeds with exceptionally high chemoselectivity and wide functional group tolerance. The interfacing of abundant first-row transition-metal catalysis with electrocatalysis and photocatalysis has brought about a paradigm shift in cross-coupling technology as practitioners are quickly applying these tools in synthesizing fine chemicals and pharmaceutically relevant motifs. In particular, the merger of Ni catalysis with electro- and photochemistry ushered in a new era for carbon-carbon and carbon-heteroatom cross-couplings with expanded generality compared to their thermally driven counterparts. Over the past decade, we have developed enabling photo- and electrochemical methods throughout our combined research experience in industry (BMS, AstraZeneca) and academia (Professor Baran, Scripps Research) in cross-disciplinary collaborative environments. In this Account, we will outline recent progress from our past and present laboratories in photo- and electrochemically mediated Ni-catalyzed cross-couplings. By highlighting these cross-coupling methodologies, we will also compare mechanistic features of both electro- and photochemical strategies for forging C(sp2)-C(sp3), C(sp3)-C(sp3), C-O, C-N, and C-S bonds. Through these side-by-side comparisons, we hope to demystify the subtle differences between the two complementary tools to enact redox control over transition metal catalysis. Finally, building off the collective experience of ourselves and the rest of the community, we propose a tactical user guide to photo- and electrochemically driven cross-coupling reactions to aid the practitioner in rapidly applying such tools in their synthetic designs.

Comproportionation and disproportionation in nickel and copper complexes

Disproportionation and comproportionation reactions have become increasingly important electron transfer events in organometallic chemistry and catalysis. The renewed interest in these reactions is in part attributed to the improved understanding of first-row metals and their ability to occupy odd and even oxidation states. Disproportionation and comproportionation reactions enable metal complexes to shuttle between various oxidation states, a matter of utmost relevance for controlling the speciation and catalytic turnover. In addition, these reactions have a direct impact in the thermodynamic and kinetic stability of the corresponding metal complexes. This review covers the relevance and impact of these processes in electron transfer reactions and provides valuable information about their non-negligible influence in Ni- and Cu-catalysed transformations.

Substrate Plasticity Enables Group-Selective Transmetalation: Catalytic Stereospecific Cross-Couplings of Tertiary Boronic Esters

Activation of enantiomerically enriched tertiary alkylboronic esters with adamantyllithium generated in situ enables stereoretentive boron-to-copper transmetalation. The resulting alkylcopper species can undergo cross-coupling reactions with an array of electrophiles to furnish synthetically useful compounds bearing quaternary stereocenters. DFT calculations of the transmetalation process provide insights for reactivity and selectivity.

Orange Light-Driven C(sp2)-C(sp3) Cross-Coupling via Spin-Forbidden Ir(III) Metallaphotoredox Catalysis

We report the development and characterization of a library of Ir(III) photocatalysts capable of undergoing spin-forbidden excitation (SFE) under orange light irradiation (595 nm). These catalysts were successfully applied to the construction of synthetically valuable C(sp2)-C(sp3) bonds inaccessible with existing methods of low-energy light-driven dual nickel/photoredox catalysis, demonstrating the synthetic utility of this photocatalyst family. The photocatalysts are capable of accessing both oxidatively and reductively activated coupling partners, illustrated through deaminative arylation and potassium alkyl trifluoroborate cross-coupling reactions with aryl halides. We demonstrate diverse substrate scopes of both cross-coupling paradigms under mild conditions in the first example of low-energy light-driven C(sp2)-C(sp3) metallaphotoredox coupling.

Iron-Catalyzed Hydrobenzylation: Stereoselective Synthesis of (-)-Eugenial C

Metal-hydride hydrogen atom transfer (MHAT) has emerged as a useful tool to form quaternary carbons from alkenes via hydrofunctionalization. Methods to date that cross-couple alkenes with sp3 partners rely on heterobimetallic catalysis to merge the two cycles. Here, we report an iron-only cross-coupling via putative MHAT/SH2 steps that solves a key stereochemical problem in the synthesis of meroterpenoid eugenial C and obviates the need for nickel. The concise synthesis benefits from a conformationally locked o,o'-disubstituted benzyl bromide and a locally sourced chiral pool terpene coupling partner.

Architector for high-throughput cross-periodic table 3D complex building

Rare-earth and actinide complexes are critical for a wealth of clean-energy applications. Three-dimensional (3D) structural generation and prediction for these organometallic systems remains a challenge, limiting opportunities for computational chemical discovery. Here, we introduce Architector, a high-throughput in-silico synthesis code for s-, p-, d-, and f-block mononuclear organometallic complexes capable of capturing nearly the full diversity of the known experimental chemical space. Beyond known chemical space, Architector performs in-silico design of new complexes including any chemically accessible metal-ligand combinations. Architector leverages metal-center symmetry, interatomic force fields, and tight binding methods to build many possible 3D conformers from minimal 2D inputs including metal oxidation and spin state. Over a set of more than 6,000 x-ray diffraction (XRD)-determined complexes spanning the periodic table, we demonstrate quantitative agreement between Architector-predicted and experimentally observed structures. Further, we demonstrate out-of-the box conformer generation and energetic rankings of non-minimum energy conformers produced from Architector, which are critical for exploring potential energy surfaces and training force fields. Overall, Architector represents a transformative step towards cross-periodic table computational design of metal complex chemistry.

Stereospecific Nickel-Catalyzed Cross-Electrophile Coupling Reaction of Alkyl Mesylates and Allylic Difluorides to Access Enantioenriched Vinyl Fluoride-Substituted Cyclopropanes

Cross-electrophile coupling reactions involving direct C-O bond activation of unactivated alkyl sulfonates or C-F bond activation of allylic gem-difluorides remain challenging. Herein, we report a nickel-catalyzed cross-electrophile coupling reaction between alkyl mesylates and allylic gem-difluorides to synthesize enantioenriched vinyl fluoride-substituted cyclopropane products. These complex products are interesting building blocks with applications in medicinal chemistry. Density functional theory (DFT) calculations demonstrate that there are two competing pathways for this reaction, both of which initiate by coordination of the electron-deficient olefin to the low-valent nickel catalyst. Subsequently, the reaction can proceed by oxidative addition of the C-F bond of the allylic gem-difluoride moiety or by directed polar oxidative addition of the alkyl mesylate C-O bond.

Multimetallic-Catalyzed C-C Bond-Forming Reactions: From Serendipity to Strategy

The use of two or more metal catalysts in a reaction is a powerful synthetic strategy to access complex targets efficiently and selectively from simple starting materials. While capable of uniting distinct reactivities, the principles governing multimetallic catalysis are not always intuitive, making the discovery and optimization of new reactions challenging. Here, we outline our perspective on the design elements of multimetallic catalysis using precedent from well-documented C-C bond-forming reactions. These strategies provide insight into the synergy of metal catalysts and compatibility of the individual components of a reaction. Advantages and limitations are discussed to promote further development of the field.

Comprehensive Theoretical Study of Cp*IrIII-Catalyzed Intermolecular Enantioselective Allylic C-H Amidation: Reaction Mechanism, Electronic Processes, and Regioselectivity

Density functional theory was used to elucidate the reaction mechanism of Cp*Ir^III-catalyzed intermolecular regioselective C(sp³)-H amidation of alkenes with methyl dioxazolones. All substrates, intermediates, and transition states were fully optimized at the ωB97XD/6-31G(d,p) level (LANL2DZ(f) for Ir). The computational results revealed that this amidation occurred through the Ir^III/Ir^V catalytic cycle, involving four important elementary steps: C-H bond activation, oxidative addition of methyl dioxazolone, reductive elimination, and proto-demetalation, and the first was the rate-determining step. The C-H bond activation showed good α- and branch-regioselectivity, decided by the distortion energy of 2-pentene and the interaction energy of the transition state, respectively. The oxidative addition of dioxazolone occurred in one elementary step with CO₂ disassociation. The reductive elimination showed good branch-regioselectivity determined by the distorted energy of the allyl group. In the proto-demetalation, hydrogen directly transferred from the oxygen atom to the nitrogen atom. Moreover, to clarify the effect of the substituted groups, selected 12 substrates were also discussed in this text.

Directed Photochemically Mediated Nickel-Catalyzed (Hetero)arylation of Aliphatic C-H Bonds

Site-selective functionalization of unactivated C(sp3)-H centers is challenging because of the ubiquity and strength of alkyl C-H bonds. Herein, we disclose a position-selective C(sp3)-C(sp2) cross-coupling reaction. This process engages C(sp3)-H bonds and aryl bromides, utilizing catalytic quantities of a photoredox-capable molecule and a nickel precatalyst. Using this technology, selective C-H functionalization arises owing to a 1,6-hydrogen atom transfer (HAT) process that is guided by a pendant alcohol-anchored sulfamate ester. These transformations proceed directly from N-H bonds, in contrast to previous directed, radical-mediated, C-H arylation processes, which have relied on prior oxidation of the reactive nitrogen center in reactions with nucleophilic arenes. Moreover, these conditions promote arylation at secondary centers in good yields with excellent selectivity.

Theoretical Insight on the High Reactivity of Reductive Elimination of NiIII Based on Energy- and Electron-Transfer Mechanisms

Iridium/nickel (Ir/Ni) metallaphotoredox dual catalysis overcomes the challenging reductive elimination (RE) of Ni(II) species and has made a breakthrough progress to construct a wide range of C-X (X = C, N, S, and P) bonds. However, the corresponding reaction mechanisms are still ambiguous and controversial because the systematic research on the nature of this synergistic catalysis is not sufficient. Herein, Ir^III/Ni^II and Ir^III/Ni⁰ metallaphotoredox catalysis have been theoretically explored taking the aryl esterification reaction of benzoic acid and aryl bromide as an example by a combination of density functional theory (DFT), molecular dynamics, and time-dependent DFT computations. It is found that an electron-transfer mechanism is applicable to Ir^III/Ni^II metallaphotoredox catalysis, but an energy-transfer mechanism is applicable to Ir^III/Ni⁰ combination. The Ir^III/Ni^II metallaphotoredox catalysis succeeds to construct a Ni^I-Ni^III catalytic cycle to avoid the challenging RE of Ni(II) species, while the RE occurs from triplet excited-state Ni(II) species in the Ir^III/Ni⁰ metallaphotoredox catalysis. In addition, the lower lowest unoccupied molecular orbital energy level of Ni(III) species than that of Ni(II) species accelerates RE from Ni(III) one. The triplet excited-state Ni(II) species can resemble a Ni(III) center, considering the metal-to-ligand charge transfer character to promote the RE.

Mechanistic views and computational studies on transition-metal-catalyzed reductive coupling reactions

Transition-metal-catalyzed reductive coupling reactions have been considered as a powerful tool to convert two electrophiles into value-added products. Numerous related reports have shown the fascinating potential. Mechanistic studies, especially theoretical studies, can provide important implications for the design of novel reductive coupling reactions. In this review, we summarize the representative advancements in theoretical studies on transition-metal-catalyzed reductive coupling reactions and systematically elaborate the mechanisms for the key steps of reductive coupling reactions. The activation modes of electrophiles and the deep insights of selectivity generation are mechanistically discussed. In addition, the mechanism of the reduction of high-oxidation-state catalysts and further construction of new chemical bonds are also described in detail.

Ligand-free nickel catalyzed perfluoroalkylation of arenes and heteroarenes

We describe a "ligand-free" Ni-catalyzed perfluoroalkylation of heteroarenes to produce a diverse array of trfiluoromethyl, pentafluoroethyl and heptafluoropropyl adducts. Catalysis proceeds at room temperature via a radical pathway. The catalytic protocol is distinguished by its simplicity, and its wide scope demonstrates the potential in the late-stage functionalization of drug analogues and peptides.

One step synthesis of unsymmetrical 1,3-disubstituted BCP ketones via nickel/photoredox-catalyzed [1.1.1]propellane multicomponent dicarbofunctionalization

Bicyclo[1.1.1]pentanes (BCPs), utilized as sp3-rich bioisosteres for tert-butyl- and aryl groups as well as internal alkynes, have gained considerable momentum in drug development programs. Although many elegant methods have been developed to access BCP amines and BCP aryls efficiently, the methods used to construct BCP ketones directly are relatively underdeveloped. In particular, the preparation of unsymmetrical 1,3-disubstituted-BCP ketones remains challenging and still requires multiple chemical steps. Herein, a single-step, multi-component approach to versatile disubstituted BCP ketones via nickel/photoredox catalysis is reported. Importantly, installing a boron group at the carbon position adjacent to the BCP structure bypasses the limitation to tertiary BF3K coupling partners, thus expanding the scope of this paradigm. Further transformation of disubstituted-BCP ketones into a variety of other BCP derivatives demonstrates the synthetic value of this developed method.

Dual Nickel/Photoredox-Catalyzed Site-Selective Cross-Coupling of 1,2-Bis-Boronic Esters Enabled by 1,2-Boron Shifts

Site‐selective transition‐metal‐catalyzed mono‐deboronative cross‐couplings of 1,2‐bis‐boronic esters are valuable methods for the synthesis of functionalized organoboron compounds. However, such cross‐couplings are limited to reaction of the sterically less hindered primary boronic ester. Herein, we report a nickel/photoredox‐catalyzed mono‐deboronative arylation of 1,2‐bis‐boronic esters that is selective for coupling of the more sterically hindered secondary/tertiary position. This is achieved by taking advantage of a 1,2‐boron shift of primary β‐boryl radicals to the thermodynamically favored secondary/tertiary radicals, which are subsequently intercepted by the nickel catalyst to enable arylation. The mild conditions are amenable to a broad range of aryl halides to give β‐aryl boronic ester products in good yields and with high regioselectivity. This method also allows stereodivergent coupling of cyclic cis‐1,2‐bis‐boronic esters to give trans‐substituted products.

Modeling Spin-Dependent Nonadiabatic Dynamics with Electronic Degeneracy: A Phase-Space Surface-Hopping Method

Nuclear Berry curvature effects emerge from electronic spin degeneracy and can lead to nontrivial spin-dependent (nonadiabatic) nuclear dynamics. However, such effects are not captured fully by any current mixed quantum-classical method such as fewest-switches surface hopping. In this work, we present a phase-space surface-hopping (PSSH) approach to simulate singlet-triplet intersystem crossing dynamics. We show that with a simple pseudodiabatic ansatz, a PSSH algorithm can capture the relevant Berry curvature effects and make predictions in agreement with exact quantum dynamics for a simple singlet-triplet model Hamiltonian. Thus, this approach represents an important step toward simulating photochemical and spin processes concomitantly, as relevant to intersystem crossing and spin-lattice relaxation dynamics.

Control of Redox‐Active Ester Reactivity Enables a General Cross‐Electrophile Approach to Access Arylated Strained Rings**

Strained rings are increasingly important for the design of pharmaceutical candidates, but cross‐coupling of strained rings remains challenging. An attractive, but underdeveloped, approach to diverse functionalized carbocyclic and heterocyclic frameworks containing all‐carbon quaternary centers is the coupling of abundant strained‐ring carboxylic acids with abundant aryl halides. Herein we disclose the development of a nickel‐catalyzed cross‐electrophile approach that couples a variety of strained ring N‐hydroxyphthalimide (NHP) esters, derived from the carboxylic acid in one step, with various aryl and heteroaryl halides under reductive conditions. The chemistry is enabled by the discovery of methods to control NHP ester reactivity, by tuning the solvent or using modified NHP esters, and the discovery that ^t‐BuBpyCam^CN, an L2X ligand, avoids problematic side reactions. This method can be run in flow and in 96‐well plates.

1,2-Radical Shifts in Photoinduced Synthetic Organic Transformations: A Guide to the Reactivity of Useful Radical Synthons

The exploration of 1,2-radical shift (RS) mechanisms in photoinduced organic reactions has provided efficient routes for the generation of important radical synthons in many chemical transformations. In this Review, the basic concepts involved in the traditional 1,2-spin-center shift (SCS) mechanisms in recently reported studies are discussed. In addition, other useful 1,2-RSs are addressed, such as those proceeding through 1,2-group migrations in carbohydrate chemistry, via 1,2-boron shifts, and by the generation of α-amino radicals. The discussion begins with a general overview of the basic aspects of 1,2-RS mechanisms, followed by a demonstration of their applicability in photoinduced transformations. The sections that follow are organized according to the mechanisms operating in combination with the 1,2-radical migration event. This contribution is not a comprehensive review but rather aims to provide an understanding of the topic, focused on the more recent advances in the field, and establishes a definition for the nomenclature that has been used to describe such mechanisms.

Kinetics of a Ni/Ir-Photocatalyzed Coupling of ArBr with RBr: Intermediacy of ArNiII(L)Br and Rate/Selectivity Factors

The Ni/Ir-photocatalyzed coupling of an aryl bromide (ArBr) with an alkyl bromide (RBr) has been analyzed using in situ LED-¹⁹F NMR spectroscopy. Four components (light, [ArBr], [Ni], [Ir]) are found to control the rate of ArBr consumption, but not the product selectivity, while two components ([(TMS)₃SiH], [RBr]) independently control the product selectivity, but not the rate. A major resting state of nickel has been identified as ArNi^II(L)Br, and ¹³C-isotopic entrainment is used to show that the complex undergoes Ir-photocatalyzed conversion to products (Ar-R, Ar-H, Ar-solvent) in competition with the release of ArBr. A range of competing absorption and quenching effects lead to complex correlations between the Ir and Ni catalyst loadings and the reaction rate. Differences in the Ir/Ni Beer–Lambert absorption profiles allow the rate to be increased by the use of a shorter-wavelength light source without compromising the selectivity. A minimal kinetic model for the process allows simulation of the reaction and provides insights for optimization of these processes in the laboratory.

Dual Photoredox Ni/Benzophenone Catalysis: A Study of the NiII Precatalyst Photoreduction Step

The combination of Ni^IIX₂ salts with a bipyridine-type ligand and aromatic carbonyl-based chromophores has emerged as a benchmark precatalytic system to efficiently conduct cross-couplings mediated by light. Mechanistic studies have led to two scenarios in which Ni⁰ is proposed as the catalytic species. Nonetheless, in none of these studies has a Ni^II to Ni⁰ photoreduction been evidenced. By exploiting UV-visible, nuclear magnetic resonance, resonance Raman, electron paramagnetic resonance, and dynamic light scattering spectroscopies and also transmission electron microscopy, we report that, when photolyzed by UVA in alcohols, the structurally defined [Ni^II₂(μ-OH₂)(dtbbpy)₂(BPCO₂)₄] complex 1 integrating a benzophenone chromophore is reduced into a diamagnetic Ni^I dimer of the general formula [Ni^I₂(dtbbpy)₂(BPCO₂)₂]. In marked contrast, in THF, photolysis led to the fast formation of Ni⁰, which accumulates in the form of metallic ultrathin Ni nanosheets characterized by a mean size of ∼100 nm and a surface plasmon resonance at 505 nm. Finally, it is shown that 1 combined with UVA irradiation catalyzes cross-couplings, that is, C(sp³)-H arylation of THF and O-arylation of methanol. These results are discussed in light of the mechanisms proposed for these cross-couplings with a focus on the oxidation state of the catalytic species.