Resilient Intracrystalline Occlusions: A Solid-State NMR View of Local Structure as It Tunes Bulk Lattice Properties

A Simplified Model for Shear Behavior of Mortar Using Biomimetic Carbonate Precipitation

As a common molecule in biomineralization, L-aspartic acid (L-Asp) has been proven to be able to induce in vitro CaCO3 precipitation, but its application in sand reinforcement has never been studied. In this study, L-Asp was employed in sand reinforcement for the first time through the newly developed biomimetic carbonate precipitation (BCP) technique. Specimens with different number of BCP spray cycles were prepared, and a series of direct shear tests were conducted to investigate the impact of spray number on shear strength, critical displacement, and residual strength. Then a simplified power model for shear stress-displacement behavior was established and calibrated with the measured data. The results show that BCP can significantly improve the shear strength of sand. As the number of spray cycles increases, both the shear strength and residual strength increase, while the critical displacement decreases. Such variations can be described with two sigmoid models and a linear model, respectively. The simplified power model performs well in most cases, especially at higher spray numbers. This study is expected to provide a practical model for the shear behavior of BCP-treated mortar.

Monitoring the influence of additives on the crystallization processes of glycine with dynamic nuclear polarization solid-state NMR

Crystallization is fundamental in many domains, and the investigation of the sequence of solid phases produced as a function of crystallization time is thus key to understand and control crystallization processes. Here, we used a solid-state nuclear magnetic resonance strategy to monitor the crystallization process of glycine, which is a model compound in polymorphism, under the influence of crystallizing additives, such as methanol or sodium chloride. More specifically, our strategy is based on a combination of low-temperatures and dynamic nuclear polarization (DNP) to trap and detect transient crystallizing forms, which may be present only in low quantities. Interestingly, our results show that these additives yield valuable DNP signal enhancements even in the absence of glycerol within the crystallizing solution.

Small-Molecular-Weight Additives Modulate Calcification by Interacting with Prenucleation Clusters on the Molecular Level

Small-molecular-weight (MW) additives can strongly impact amorphous calcium carbonate (ACC), playing an elusive role in biogenic, geologic, and industrial calcification. Here, we present molecular mechanisms by which these additives regulate stability and composition of both CaCO₃ solutions and solid ACC. Potent antiscalants inhibit ACC precipitation by interacting with prenucleation clusters (PNCs); they specifically trigger and integrate into PNCs or feed PNC growth actively. Only PNC-interacting additives are traceable in ACC, considerably stabilizing it against crystallization. The selective incorporation of potent additives in PNCs is a reliable chemical label that provides conclusive chemical evidence that ACC is a molecular PNC-derived precipitate. Our results reveal additive-cluster interactions beyond established mechanistic conceptions. They reassess the role of small-MW molecules in crystallization and biomineralization while breaking grounds for new sustainable antiscalants.

Monitoring of CaCO3 Nanoscale Structuration through Real-Time Liquid Phase Transmission Electron Microscopy and Hyperpolarized NMR

Calcium carbonate (CaCO₃) is one of the most significant biominerals in nature. Living organisms are able to control its biomineralization by means of an organic matrix to tailor a myriad of hybrid functional materials. The soluble organic components are often proteins rich in acidic amino-acids such as l-aspartic acid. While several studies have demonstrated the influence of amino acids on the crystallization of calcium carbonate, nanoscopic insight of their impact on CaCO₃ mineralization, in particular at the early stages, is still lacking. Herein, we implement liquid phase-transmission electron microscopy (LP-TEM) in order to visualize in real-time and at the nanoscale the prenucleation stages of CaCO₃ formation. We observe that l-aspartic acid favors the formation of individual and aggregated prenucleation clusters which are found stable for several minutes before the transformation into amorphous nanoparticles. Combination with hyperpolarized solid state nuclear magnetic resonance (DNP NMR) and density functional theory (DFT) calculations allow shedding light on the underlying mechanism at the prenucleation stage. The promoting nature of l-aspartic acid with respect to prenucleation clusters is explained by specific interactions with both Ca²⁺ and carbonates and the stabilization of the Ca²⁺-CO₃^2-/HCO₃^- ion pairs favoring the formation and stabilization of the CaCO₃ transient precursors. The study of prenucleation stages of mineral formation by the combination of in situ LP-TEM, advanced analytical techniques (including hyperpolarized solid-state NMR), and numerical modeling allows the real-time monitoring of prenucleation species formation and evolution and the comprehension of their relative stability.

Aspartic Acid-Assisted Size-Controllable Synthesis of Nanoscale Spherical Covalent Organic Frameworks with Chiral Interfaces for Inhibiting Amyloid-β Fibrillation

Covalent organic framework nanospheres (COF NSs) have garnered special attention due to their uniform sphere morphology, adjustable particle size, and mesoporous microenvironment. However, methods to control an optimal particle size scale while achieving solution dispersibility and specific surface properties remain underdeveloped, which precludes many of the biomedical applications. Here, we propose and develop a general strategy to access simultaneous size control and surface functionalization of uniform spherical COF NSs in a single step using aspartic acid (d-/l-Asp) that plays center roles in an acid catalyst, hydrophilicity, size-controllable synthesis, and chiral enantiomer. In this study, for the first time, we have employed a surface chemistry engineering study to create a variety of nanoscale spherical COFs and subsequently measure parameters to evaluate the effectiveness of Asp in the regulation of the particle size. Moreover, the potential utilization of the d/l-enantiomeric Asp-COF NSs in preventing β-amyloid (Aβ) aggregation is investigated by analyzing their interactions with Aβ amyloids using a multitechnique experimental approach. To our knowledge, our strategy is the first synthesis of hydrophilic COF NSs with an optimal length scale and a chiral-selective targeting surface, which are crucial for the inhibition of Aβ fibrillation for Alzheimer's disease prevention.

Monitoring Crystallization Processes in Confined Porous Materials by Dynamic Nuclear Polarization Solid-State Nuclear Magnetic Resonance

Establishing mechanistic understanding of crystallization processes at the molecular level is challenging, as it requires both the detection of transient solid phases and monitoring the evolution of both liquid and solid phases as a function of time. Here, we demonstrate the application of dynamic nuclear polarization (DNP) enhanced NMR spectroscopy to study crystallization under nanoscopic confinement, revealing a viable approach to interrogate different stages of crystallization processes. We focus on crystallization of glycine within the nanometric pores (7-8 nm) of a tailored mesoporous SBA-15 silica material with wall-embedded TEMPO radicals. The results show that the early stages of crystallization, characterized by the transition from the solution phase to the first crystalline phase, are straightforwardly observed using this experimental strategy. Importantly, the NMR sensitivity enhancement provided by DNP allows the detection of intermediate phases that would not be observable using standard solid-state NMR experiments. Our results also show that the metastable β polymorph of glycine, which has only transient existence under bulk crystallization conditions, remains trapped within the pores of the mesoporous SBA-15 silica material for more than 200 days.

Coccolith crystals: Pure calcite or organic-mineral composite structures?

The localization of organic material within biominerals is central to developing biomineral formation mechanisms. Coccoliths, morphologically sophisticated calcite platelets of intracellularly calcifying coccolithophores, are not only eco-physiologically important, but also influence biogeochemical cycles through mass production. Despite their importance and over a century of research, the formation mechanism of coccoliths is still poorly understood. Crucial unsolved questions include the localization of organic material within coccoliths. In extracellular calcifiers the discovery of an organics-containing nano-structure within seemingly single crystals has led to the formulation of a two-step crystallization mechanism. Coccoliths are traditionally thought of as being formed by a different mechanism, but it is unclear whether coccolith crystals possess a nano-structure. Here we review the evidence for and against such a nano-structure. Current SXPD analyses suggest a nano-structure of some kind, while imaging methods (SEM, TEM, AFM) provide evidence against it. We suggest directions for future research which should help solve this puzzle. STATEMENT OF SIGNIFICANCE: Coccolithophores, unicellular calcifying algae, are important primary producers and contribute significantly to pelagic calcium carbonate export. Their calcite platelets, the coccoliths, are amongst the most sophisticated biomineral structures. Understanding the crystallization mechanism of coccolith crystals is not only central to coccolithophore cell biology but also lies at the heart of biomineralization research more generally. The crystallization mechanism of coccoliths has remained largely elusive, not least because it is still an open question whether the micron sized coccolith crystals are pure calcite, or contain organic material. Here we review the state of the art and suggest a way to solve this central problem.