Photoinduced Charge Accumulation and Prolonged Multielectron Storage for the Separation of Light and Dark Reaction

Fabrication of Active Z-Scheme Sr2MgSi2O7: Eu2+, Dy3+/COF Photocatalyst for Round-the-Clock Efficient Removal of Total Cr

Photoreduction is recognized as a desirable treatment method for hexavalent chromium (Cr(VI)). However, it has been limited by the intermittent solar flux and limited light absorption. In this work, a novel Z-scheme photocatalyst combining a covalent organic framework (COF) with Eu2+, Dy3+ co-doped Sr2MgSi2O7 (Sr2MgSi2O7:Eu2+, Dy3+) is synthesized, which shows the high spectral conversion efficiency and works efficiently in both light irradiation and dark for Cr(VI) reduction. Sr2MgSi2O7:Eu2+, Dy3+ serves as both an electron transfer station and active sites for COF molecule activation, thus resulting in 100% photoreduction of Cr(VI) (50 mL, 10 mg/L) with high light stability and over 1 h dark activity. Moreover, the XPS and FT-IR analyses reveal the existence of functional groups (Si-OH on Sr2MgSi2O7:Eu2+, Dy3+, and -NH- on COFTP-TTA) on the composited catalyst as active sites to adsorb the resultant Cr(III) species, demonstrating a synergistic effect for total Cr removal. This work provides an alternative method for the design of a round-the-clock photocatalyst for Cr(VI) reduction, allowing a versatile solid surface activation for establishing a more energy efficient and robust photocatalysis process for Cr pollution cleaning.

Photochargeable Mn-Based Metal-Organic Framework and Decoupled Photocatalysis

Designing multifunctional materials that mimic the light-dark decoupling of natural photosynthesis is a key challenge in the field of energy conversion. Herein, we introduce MnBr-253, a precious metal-free metal-organic framework (MOF) built on Al nodes, bipyridine linkers and MnBr(CO)3(bipyridine) complexes. Upon irradiation, MnBr-253 colloids demonstrate an electron photocharging capacity of ~42 C ⋅ g-1 MOF, with state-of-the-art photocharging rate (1.28 C ⋅ s-1 ⋅ g-1 MOF) and incident photon-to-electron conversion efficiency of ~9.4 % at 450 nm. Spectroscopic and computational studies support effective electron accumulation at the Mn complex while high porosity and Mn loading account for the notable electron storage performance. The charged MnBr-253 powders were successfully applied for hydrogen evolution under dark conditions thus emulating the light-decoupled reactivity of photosynthesis.

Dual Role of a Novel Heteroleptic Cu(I) Complex in Visible-Light-Driven CO2 Reduction

A novel mononuclear Cu(I) complex was synthesized via coordination with a benzoquinoxalin-2'-one-1,2,3-triazole chelating diimine and the bis[(2-diphenylphosphino)phenyl] ether (DPEPhos), to target a new and efficient photosensitizer for photocatalytic CO2 reduction. The Cu(I) complex absorbs in the blue-green region of the visible spectrum, with a broad band having a maximum at 475 nm (ϵ =4500 M-1 cm-1), which is assigned to the metal-to-ligand charge transfer (MLCT) transition from the Cu(I) to the benzoquinoxalin-2'-one moiety of the diimine. Surprisingly, photo-driven experiments for the CO2 reduction showed that this complex can undergo a photoinduced electron transfer with a sacrificial electron donor and accumulate electrons on the diimine backbone. Photo-driven experiments in a CO2 atmosphere revealed that this complex can not only act as a photosensitizer, when combined with an Fe(III)-porphyrin, but can also selectively produce CO from CO2. Thus, owing to its charge-accumulation properties, the non-innocent benzoquinoxalin-2-one based ligand enabled the development of the first copper(I)-based photocatalyst for CO2 reduction.

Beyond the First Coordination Sphere─Manipulating the Excited-State Landscape in Iron(II) Chromophores with Protons

Molecular transition metal chromophores play a central role in light harvesting and energy conversion. Recently, earth-abundant transition-metal-based chromophores have begun to challenge the dominance of platinum group metal complexes in this area. However, the development of new chromophores with optimized photophysical properties is still limited by a lack of synthetic methods, especially with respect to heteroleptic complexes with functional ligands. Here, we demonstrate a facile and efficient method for the combination of strong-field carbenes with the functional 2,2'-bibenzimidazole ligand in a heteroleptic iron(II) chromophore complex. Our approach yields two isomers that differ predominantly in their excited-state lifetimes based on the symmetry of the ligand field. Deprotonation of both isomers leads to a significant red-shift of the metal-to-ligand charge transfer (MLCT) absorption and a shortening of excited-state lifetimes. Femtosecond transient absorption spectroscopy in combination with quantum chemical simulations and resonance Raman spectroscopy reveals the complex relationship between protonation and photophysical properties. Protonation is found to tip the balance between MLCT and metal-centered (MC) excited states in favor of the former. This study showcases the first example of fine-tuning of the excited-state landscape in an iron(II) chromophore through second-sphere manipulations and provides a new perspective to the challenge of excited-state optimizations in 3d transition metal chromophores.

Reduced Graphene Oxide/Cellulose Sodium Aerogel-Supported Eutectic Phase Change Material Gel Demonstrating Superior Energy Conversion and Storage Capacity toward High-Performance Personal Thermal Management

By virtue of their capacity to absorb and release energy during the phase change process, phase change materials (PCMs) are ideal for personal thermal management (PTM). The combination of reduced graphene oxide/cellulose sodium aerogel (rGCA) and lauric acid/myristic acid binary eutectic phase change gel (LMG) creates a composite phase change material that possesses outstanding photothermal conversion capabilities, electro-thermal conversion capabilities, energy storage capabilities, and shape-stable performance. The results showed that rGCA had a maximum adsorption efficiency of 99.7% with a melting latent heat of 124.6 J g-1. The high absorption rate of rGCA to LMG is a result of the capillary force, pore characteristics, hydrogen bonding, and the π-π interaction. Notably, rGCA and LMG composite material (rGCG) exhibited an excellent photothermal conversion efficiency of 96.5% and electro-thermal conversion of 82.3%. Results indicate that binary eutectic phase change materials are more suitable for temperature regulation than single phase change materials, making them more suitable for PTM. It is anticipated that the innovative thermal comfort solution, which provides thermal shielding, thermal energy storage, self-supporting characteristics, and wearability, will offer new possibilities for the next generation of wearable PTMs.

Convergence of Time-Derivative Nonadiabatic Couplings in Plane-Wave DFT Calculations

Accurate prediction of charge carrier relaxation rates is essential to design molecules and materials with the desired photochemical properties for applications like photocatalysis and solar energy conversion. Nonadiabatic molecular dynamics allows one to simulate the relaxation process of excited charge carriers. Plane-wave density functional theory (DFT) calculations make the time-derivative nonadiabatic couplings (TNACs) simple to compute because the basis is independent of the atomic positions. However, the effect of the kinetic energy cutoff for the plane-wave basis on the accuracy of the dynamics has not been studied. Here, we examine the effect of the kinetic energy cutoff on the TNACs and decay time scales for the prototypical model system of tetracene. These calculations show that the choice of kinetic energy cutoff can change the relaxation time by up to 30%. The relaxation times of states that have small TNACs to other states or are far from degenerate are more sensitive to the kinetic energy cutoff than those of states with large TNACs or near degeneracies. A kinetic energy cutoff of 60 Ry is sufficient for all states to reach semiquantitative agreement (absolute error <10%) with the decay times of our 110 Ry reference data, and a cutoff of 80 Ry is required for all states to reach quantitative agreement (absolute error <2%).

Photochemical charge accumulation in a heteroleptic copper(i)-anthraquinone molecular dyad via proton-coupled electron transfer

Developing efficient photocatalysts that perform multi electron redox reactions is critical to achieving solar energy conversion. One can reach this goal by developing systems which mimic natural photosynthesis and exploit strategies such as proton-coupled electron transfer (PCET) to achieve photochemical charge accumulation. We report herein a heteroleptic Cu(i)bis(phenanthroline) complex, Cu-AnQ, featuring a fused phenazine-anthraquinone moiety that photochemically accumulates two electrons in the anthraquinone unit via PCET. Full spectroscopic and electrochemical analyses allowed us to identify the reduced species and revealed that up to three electrons can be accumulated in the phenazine-anthraquinone ring system under electrochemical conditions. Continuous photolysis of Cu-AnQ in the presence of sacrificial electron donor produced doubly reduced monoprotonated photoproduct confirmed unambiguously by X-ray crystallography. Formation of this photoproduct indicates that a PCET process occurred during illumination and two electrons were accumulated in the system. The role of the heteroleptic Cu(i)bis(phenanthroline) moiety participating in the photochemical charge accumulation as a light absorber was evidenced by comparing the photolysis of Cu-AnQ and the free AnQ ligand with less reductive triethylamine as a sacrificial electron donor, in which photogenerated doubly reduced species was observed with Cu-AnQ, but not with the free ligand. The thermodynamic properties of Cu-AnQ were examined by DFT which mapped the probable reaction pathway for photochemical charge accumulation and the capacity for solar energy stored in the process. This study presents a unique system built on earth-abundant transition metal complex to store electrons, and tune the storage of solar energy by the degree of protonation of the electron acceptor.

Better Covalent Connection in a Molecular Triad Enables More Efficient Photochemical Energy Storage

Numerous studies have explored the kinetics of light-induced charge separation and thermal charge recombination in donor-acceptor compounds, but quantum efficiencies have rarely been investigated. Here, we report on two essentially isomeric molecular triads, both comprising a π-extended tetrathiafulvalene (ExTTF) donor, a ruthenium(II)-based photosensitizer, and a naphthalene diimide (NDI) acceptor. The key difference between the two triads is how the NDI acceptor is connected. Linkage at the NDI core provides stronger electronic coupling to the other molecular components than connection via the nitrogen atoms of NDI. This change in molecular connectivity is expected to accelerate both energy-storing charge separation and energy-wasting charge recombination processes, but it is not a priori clear how this will affect the triad's ability to store photochemical energy; any gain resulting from faster charge separation could potentially be (over)compensated by losses through accelerated charge recombination. The new key insight emerging from our study is that the quantum yield for the formation of a long-lived charge-separated state increases by a factor of 5 when going from nitrogen- to core-connected NDI, providing the important proof of concept that better molecular connectivity indeed enables more efficient photochemical energy storage. The physical origin of this behavior seems to root in different orbital connectivity pathways for charge separation and charge recombination, as well as in differences in the relevant orbital interactions depending on NDI connection. Our work provides guidelines for how to discriminate between energy-storing and energy-wasting electron transfer reactions in order to improve the quantum yields for photochemical energy storage and solar energy conversion.

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

This review surveys advances in the literature that impact organic sacrificial electron donor recycling in artificial photosynthesis. Systems for photocatalytic carbon dioxide reduction are optimized using sacrificial electron donors. One strategy for coupling carbon dioxide reduction and water oxidation to achieve artificial photosynthesis is to use a redox mediator, or recyclable electron donor. This review highlights photo- and electrochemical methods for recycling amines and NADH analogues that can be used as electron donors in artificial photosynthesis. Important properties of sacrificial donors and recycling strategies are also discussed. Compounds from other fields, such as redox flow batteries and decoupled water splitting research, are introduced as alternative recyclable sacrificial electron donors and their oxidation potentials are compared to the redox potentials of some model photosensitizers. The aim of this review is to act as a reference for researchers developing photocatalytic systems with sacrificial electron donors, and for researchers interested in designing new redox mediator and recyclable electron donor species.

Bichromophoric Photosensitizers: How and Where to Attach Pyrene Moieties to Phenanthroline to Generate Copper(I) Complexes

Pyrene is a polycyclic aromatic hydrocarbon and organic dye that can form superior bichromophoric systems when combined with a transition metal-based chromophore. However, little is known about the effect of the type of attachment (i.e., 1- vs 2-pyrenyl) and the individual position of the pyrenyl substituents at the ligand. Therefore, a systematic series of three novel diimine ligands and their respective heteroleptic diimine-diphosphine copper(I) complexes has been designed and extensively studied. Special attention was given to two different substitution strategies: (i) attaching pyrene via its 1-position, which occurs most frequently in the literature, or via its 2-position and (ii) targeting two contrasting substitution patterns at the 1,10-phenanthroline ligand, i.e., the 5,6- and the 4,7-position. In the applied spectroscopic, electrochemical, and theoretical methods (UV/vis, emission, time-resolved luminescence and transient absorption, cyclic voltammetry, density functional theory), it has been shown that the precise choice of the derivatization sites is crucial. Substituting the pyridine rings of phenanthroline in the 4,7-position with the 1-pyrenyl moiety has the strongest impact on the bichromophore. This approach results in the most anodically shifted reduction potential and a drastic increase in the excited state lifetime by more than two orders of magnitude. In addition, it enables the highest singlet oxygen quantum yield of 96% and the most beneficial activity in the photocatalytic oxidation of 1,5-dihydroxy-naphthalene.

Reaching strong absorption up to 700 nm with new benzo[g]quinoxaline-based heteroleptic copper(I) complexes for light-harvesting applications

Heteroleptic copper(I) complexes, with a diimine as a chromophoric unit and a bulky diphosphine as an ancillary ligand, have the advantage of a reduced pseudo Jahn-Teller effect in their excited state over the corresponding homoleptic bis(diimine) complexes. Nevertheless, their lowest absorption lies generally between 350 to 500 nm. Aiming at a strong absorption in the visible by stable heteroleptic Cu(I) complexes, we designed a novel diimine based on 4-(benzo[g]quinoxal-2'-yl)-1,2,3-triazole derivatives. The large π-conjugation of the benzoquinoxaline moiety shifted bathochromically the absorption with regard to other diimine-based Cu(I) complexes. Adding another Cu(I) core broadened the absorption and extended it to considerably longer wavelengths. Moreover, by fine-tuning the structure of the dichelating ligand, we achieved a panchromatic absorption up to 700 nm with a high molar extinction coefficient of 8000 M^-1 cm^-1 at maximum (λ = 570 nm), making this compound attractive for light-harvesting antennae.

Ultrathin 2D Cerium-Based Metal-Organic Framework Nanosheet That Boosts Selective Oxidation of Inert C(sp3 )H Bond through Multiphoton Excitation

The development of methodologies for inducing and tailoring activities of catalysts is an important issue in various catalysis. The ultrathin 2D monolayer metal-organic framework (MOF) nanosheets with more accessible active sites and faster diffusion obtained by exfoliating 3D layered MOFs are of great potential as heterogeneous catalysts, but the rational design and preparation of 3D layered MOFs remains a grand challenge. Herein, a novel weak electrostatic interaction strategy to construct a 3D layered cerium-bearing MOF by coordinating chlorine-capped cerium nodes and linear photoactive methyl viologen (MV⁺ ) organic linkers is used. Under multiphoton excitation, the MV⁺ ligands and CeCl chromophores are triggered consecutively to form the high activity chlorine radical (Cl^• ) for activation of inert C(sp³ )H bond through a hydrogen atom transfer. Benefiting from framework confinement effects, synergistic effects of two active sites and/or flexibility of the ultrathin framework nanosheets with high surface utilization, the observed activities increase in the order CeCl₃ /MV⁺  < bulk 3D MOF crystals < 2D MOF nanosheets in photocatalysis. This work not only contributes a new strategy to construct 3D layered MOFs and their ultrathin nanosheets but also paves the way to use nanostructured MOFs to handle synergy of multiple molecular catalysts.

Decoupled Artificial Photosynthesis

Natural photosynthesis (NP) generates oxygen and carbohydrates from water and CO₂ utilizing solar energy to nourish lives and balance CO₂ levels. Following nature, artificial photosynthesis (AP), typically, overall water or CO₂ splitting, produces fuels and chemicals from renewable energy. However, hydrogen evolution or CO₂ reduction is inherently coupled with kinetically sluggish water oxidation, lowering efficiencies and raising safety concerns. Decoupled systems have thus emerged. In this review, we elaborate how decoupled artificial photosynthesis (DAP) evolves from NP and AP and unveil their distinct photoelectrochemical mechanisms in energy capture, transduction and conversion. Advances of AP and DAP are summarized in terms of photochemical (PC), photoelectrochemical (PEC), and photovoltaic-electrochemical (PV-EC) catalysis based on material and device design. The energy transduction process of DAP is emphasized. Challenges and perspectives on future researches are also presented.

New Strategy for the Persistent Photocatalytic Reduction of U(VI): Utilization and Storage of Solar Energy in K+ and Cyano Co-Decorated Poly(Heptazine Imide)

The photocatalytic conversion of soluble U(VI) into insoluble U(IV) is a robust strategy to harvest aqueous uranium, but remains challenging owing to the intermittent availability of solar influx and reoxidation of U(IV) without illumination. Herein, a dual platform based on K+ and cyano group co-decorated poly(heptazine imide) (K-CN-PHI) is reported that can drive persistent U(VI) extraction upon/beyond light. K-CN-PHI achieves the photocatalytic reduction of U(VI) with a reaction rate of 0.89 min-1 , being 47 times greater than that over pristine carbon nitride (PCN). This system can further be triggered by light to form long-living radicals, driving the reduction of U(VI) in the dark for over 3 d. The flexible structural K+ as counterions stabilize the electrons trapped by cyanamide groups, enabling the long lifetime of the generated radicals. The results collectively prove K-CN-PHI to be a novel and efficient photocatalyst enabling persistent U(VI) extraction around the clock, and broadening the practical applications of the photocatalytic extraction of U(VI).

Accumulation of Four Electrons on a Terphenyl (Bis)disulfide

The activation of N₂ , CO₂ or H₂ O to energy-rich products relies on multi-electron transfer reactions, and consequently it seems desirable to understand the basics of light-driven accumulation of multiple redox equivalents. Most of the previously reported molecular acceptors merely allow the storage of up to two electrons. We report on a terphenyl compound including two disulfide bridges, which undergoes four-electron reduction in two separate electrochemical steps, aided by a combination of potential compression and inversion. Under visible-light irradiation using the organic super-electron donor tetrakis(dimethylamino)ethylene, a cascade of light-induced reaction steps is observed, leading to the cleavage of both disulfide bonds. Whereas one of them undergoes extrusion of sulfur to result in a thiophene, the other disulfide is converted to a dithiolate. These insights seem relevant to enhance the current fundamental understanding of photochemical energy storage.

Photophysics of Anionic Bis(4H-imidazolato)CuI Complexes

In this paper, the photophysical behavior of four panchromatically absorbing, homoleptic bis(4H-imidazolato)CuI complexes, with a systematic variation in the electron-withdrawing properties of the imidazolate ligand, were studied by wavelength-dependent time-resolved femtosecond transient absorption spectroscopy. Excitation at 400, 480, and 630 nm populates metal-to-ligand charge transfer, intraligand charge transfer, and mixed-character singlet states. The pump wavelength-dependent transient absorption data were analyzed by a recently established 2D correlation approach. Data analysis revealed that all excitation conditions yield similar excited-state dynamics. Key to the excited-state relaxation is fast, sub-picosecond pseudo-Jahn-Teller distortion, which is accompanied by the relocalization of electron density onto a single ligand from the initially delocalized state at Franck-Condon geometry. Subsequent intersystem crossing to the triplet manifold is followed by a sub-100 ps decay to the ground state. The fast, nonradiative decay is rationalized by the low triplet-state energy as found by DFT calculations, which suggest perspective treatment at the strong coupling limit of the energy gap law.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Influence of the Linker Chemistry on the Photoinduced Charge‐Transfer Dynamics of Hetero‐dinuclear Photocatalysts

To optimize light‐driven catalytic processes, light‐mediated multi‐electron transfer dynamics in molecular dyads need to be studied and correlated with structural changes focusing on the catalytically active metastable intermediates. Here, spectro‐electrochemistry has been employed to investigate the structure‐dependent photoelectron transfer kinetics in catalytically active intermediates of two Ru−Rh catalysts for light‐driven NAD⁺ reduction. The excited‐state reactivity of short‐lived intermediates was studied along different photoreaction pathways by resonance Raman and time‐resolved transient absorption spectro‐electrochemistry with sub‐picosecond time resolution under operando conditions. The results demonstrate, for the first time, how the bridging ligand serves as a (multi‐)electron storage structure, mediates the strength of the electronic coupling of catalytic and photocenter and impacts the targeted electron transfer as well as parasitic electron‐transfer kinetics.

How the Way a Naphthalimide Unit is Implemented Affects the Photophysical and -catalytic Properties of Cu(I) Photosensitizers

Driven by the great potential of solar energy conversion this study comprises the evaluation and comparison of two different design approaches for the improvement of copper based photosensitizers. In particular, the distinction between the effects of a covalently linked and a directly fused naphthalimide unit was assessed. For this purpose, the two heteroleptic Cu(I) complexes CuNIphen (NIphen = 5-(1,8-naphthalimide)-1,10-phenanthroline) and Cubiipo (biipo = 16H-benzo-[4′,5′]-isoquinolino-[2′,1′,:1,2]-imidazo-[4,5-f]-[1,10]-phenanthroline-16-one) were prepared and compared with the novel unsubstituted reference compound Cuphen (phen = 1,10-phenanthroline). Beside a comprehensive structural characterization, including two-dimensional nuclear magnetic resonance spectroscopy and X-ray analysis, a combination of electrochemistry, steady-state and time-resolved spectroscopy was used to determine the electrochemical and photophysical properties in detail. The nature of the excited states was further examined by (time-dependent) density functional theory (TD-DFT) calculations. It was found that CuNIphen exhibits a greatly enhanced absorption in the visible and a strong dependency of the excited state lifetimes on the chosen solvent. For example, the lifetime of CuNIphen extends from 0.37 µs in CH2Cl2 to 19.24 µs in MeCN, while it decreases from 128.39 to 2.6 µs in Cubiipo. Furthermore, CuNIphen has an exceptional photostability, allowing for an efficient and repetitive production of singlet oxygen with quantum yields of about 32%.

Ligand‐Induced Donor State Destabilisation – A New Route to Panchromatically Absorbing Cu(I) Complexes

The intense absorption of light to covering a large part of the visible spectrum is highly desirable for solar energy conversion schemes. To this end, we have developed novel anionic bis(4H‐imidazolato)Cu(I) complexes (cuprates), which feature intense, panchromatic light absorption properties throughout the visible spectrum and into the NIR region with extinction coefficients up to 28,000 M⁻¹ cm⁻¹. Steady‐state absorption, (spectro)electrochemical and theoretical investigations reveal low energy (Vis to NIR) metal‐to‐ligand charge‐transfer absorption bands, which are a consequence of destabilized copper‐based donor states. These high‐lying copper‐based states are induced by the σ‐donation of the chelating anionic ligands, which also feature low energy acceptor states. The optical properties are reflected in very low, copper‐based oxidation potentials and three ligand‐based reduction events. These electronic features reveal a new route to panchromatically absorbing Cu(I) complexes.

A Combined Spectroscopic and Theoretical Study on a Ruthenium Complex Featuring a π-Extended dppz Ligand for Light-Driven Accumulation of Multiple Reducing Equivalents

The design of photoactive systems capable of storing and relaying multiple electrons is highly demanded in the field of artificial photosynthesis, where transformations of interest rely on multielectronic redox processes. The photophysical properties of the ruthenium photosensitizer [(bpy)2 Ru(oxim-dppqp)]2+ (Ru), storing two electrons coupled to two protons on the π-extended oxim-dppqp ligand under light-driven conditions, are investigated by means of excitation wavelength-dependent resonance Raman and transient absorption spectroscopies, in combination with time-dependent density functional theory; the results are discussed in comparison to the parent [(bpy)2 Ru(dppz)]2+ and [(bpy)2 Ru(oxo-dppqp)]2+ complexes. In addition, this study provides in-depth insights on the impact of protonation or of accumulation of multiple reducing equivalents on the reactive excited states.

A photosensitizer-polyoxometalate dyad that enables the decoupling of light and dark reactions for delayed on-demand solar hydrogen production

Decoupling the production of solar hydrogen from the diurnal cycle is a key challenge in solar energy conversion, the success of which could lead to sustainable energy schemes capable of delivering H₂ independent of the time of day. Here, we report a fully integrated photochemical molecular dyad composed of a ruthenium-complex photosensitizer covalently linked to a Dawson polyoxometalate that acts as an electron-storage site and hydrogen-evolving catalyst. Visible-light irradiation of the system in solution leads to charge separation and electron storage on the polyoxometalate, effectively resulting in a liquid fuel. In contrast to related, earlier dyads, this system enables the harvesting, storage and delayed release of solar energy. On-demand hydrogen release is possible by adding a proton donor to the dyad solution. The system is a minimal molecular model for artificial photosynthesis and enables the spatial and temporal separation of light absorption, fuel storage and hydrogen release.

Merging of a Perylene Moiety Enables a RuII Photosensitizer with Long-Lived Excited States and the Efficient Production of Singlet Oxygen

Multichromophoric systems based on a RuII polypyridine moiety containing an additional organic chromophore are of increasing interest with respect to different light-driven applications. Here, we present the synthesis and detailed characterization of a novel RuII photosensitizer, namely [(tbbpy)2 Ru((2-(perylen-3-yl)-1H-imidazo[4,5-f][1,10]-phenanthrolline))](PF6 )2 RuipPer, that includes a merged perylene dye in the back of the ip ligand. This complex features two emissive excited states as well as a long-lived (8 μs) dark state in acetonitrile solution. Compared to prototype [(bpy)3 Ru]2+ -like complexes, a strongly altered absorption (ϵ=50.3×103  M-1  cm-1 at 467 nm) and emission behavior caused by the introduction of the perylene unit is found. A combination of spectro-electrochemistry and time-resolved spectroscopy was used to elucidate the nature of the excited states. Finally, this photosensitizer was successfully used for the efficient formation of reactive singlet oxygen.

Comprehensive Picture of the Excited State Dynamics of Cu(I)- and Ru(II)-Based Photosensitizers with Long-Lived Triplet States

Ru(II)- and Cu(I)-based photosensitizers featuring the recently developed biipo ligand (16H-benzo-[4',5']-isoquinolino-[2',1',:1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one) were comprehensively investigated by X-ray crystallography, electrochemistry, and especially several time-resolved spectroscopic methods covering all time scales from femto- to milliseconds. The analysis of the experimental results is supported by density functional theory (DFT) calculations. The biipo ligand consists of a coordinating 1,10-phenanthroline moiety fused with a 1,8-naphthalimide unit, which results in an extended π-system with an incorporated electron acceptor moiety. In a previous study, it was shown that this ligand enabled a Ru(II) complex that is an efficient singlet oxygen producer and of potential use for other light-driven applications due to its long emission lifetime. The goal of our here presented research is to provide a full spectroscopic picture of the processes that follow optical excitation. Interestingly, the Ru(II) and Cu(I) complexes differ in their characteristics even though the lowest electronically excited states involve in both cases the biipo ligand. The combined spectroscopic results indicate that an emissive ³MLCT state and a rather dark ³LC state are populated, each to some extent. For the Cu(I) complex, most of the excited population ends up in the ³LC state with an extraordinary lifetime of 439 μs in the solid state at 20 K, while a significant population of the ³MLCT state causes luminescence for the Ru(II) complex. Hence, there is a balance between these two states, which can be tuned by altering the metal center or even by thermal energy, as suggested by the temperature-dependent experiments.

Recent Advances and Perspectives in Photodriven Charge Accumulation in Molecular Compounds: A Mini Review

The formation of so-called solar fuels from abundant low-energetic compounds, such as carbon dioxide or water, relies on the chemical elementary steps of photoinduced electron transfer and accumulation of multiple redox equivalents. The majority of molecular systems explored to date require sacrificial electron donors to accumulate multiple electrons on a single acceptor unit, but the use of high-energetic sacrificial redox reagents is unsustainable. In recent years, an increasing number of molecular compounds for reversible light-driven accumulation of redox equivalents that do not need sacrificial electron donors has been reported. Those compounds are the focus of this mini review. Different concepts, such as redox potential compression (achieved by proton-coupled electron transfer, Lewis acid-base interactions, or structural rearrangements), hybrids with inorganic nanoparticles, and diffusion-controlled multi-component systems, will be discussed. Newly developed strategies to outcompete unproductive reaction pathways in favor of desired photoproduct formation will be compared, and the importance of identifying reaction intermediates in the course of multiphotonic excitation by different time-resolved spectroscopic techniques will be discussed. The mechanistic insights gained from molecular donor-photosensitizer-acceptor compounds inform the design of next-generation charge accumulation systems for solar energy conversion.

Modulating the Excited-State Decay Pathways of Cu(I) 4H-Imidazolate Complexes by Excitation Wavelength and Ligand Backbone

Cu(I) 4H-imidazolato complexes are excellent photosensitizers with broad and intense light absorption properties, based on an earth-abundant metal, and hold great promise as photosensitizers in artificial photosynthesis and for accumulation of redox equivalents. In this study, the excited-state relaxation dynamics of three novel heteroleptic Cu(I) 4H-imidazolato complexes with phenyl, tolyl, and mesityl side groups are systematically investigated by femtosecond and nanosecond time-resolved transient absorption spectroscopy and theoretical methods, complemented by steady-state absorption spectroscopy and (spectro)electrochemistry. After photoexcitation into the metal-to-ligand charge transfer (MLCT) and intraligand charge transfer absorption band, fast (0.6-1 ps) intersystem crossing occurs into the triplet MLCT manifold. The triplet-state population relaxes via the geometrical planarization of the N-aryl rings on the Cu(I) 4H-imidazolato complexes. Depending on the initial Franck-Condon state, the remaining small singlet state population relaxes into two geometrically distinct minima geometries with similar energy, S_1/2,relax and S_3/4,relax. Subsequent ground-state recovery from S_1/2,relax and internal conversion from S_3/4,relax to S_1/2,relax take place on a 100 ps time scale. The internal conversion can be understood as hole transfer from a d_yz-orbital to a d_xz-orbital, which is accompanied with the structural reorganization of the coordination environment. Generally, the photophysical processes are determined by the steric hindrance of the side groups on the ligands. And the excited singlet-state pathways are dependent on the excitation wavelength.

Continuous photocatalysis via photo-charging and dark-discharging for sustainable environmental remediation: Performance, mechanism, and influencing factors

Continuous photocatalysis via photo-charging and dark-discharging presents a paradigm shift in conventional photocatalysis with the requirement of continuous illumination to maintain the catalytic activity. This is expected to meet the ever-increasing demand for sustainable development of energy and environment driven by natural day-night cycles. Substantial advances in continuous photocatalysis for various environmental applications under light-dark cycles have been witnessed during the last decade. However, there lacks a systematic and critical review on basic but important information of continuous photocatalysis for environmental remediation, challenging robust scientific progress of this technology towards potential practical use. Here, the general description of continuous photocatalysis involving energy storage mechanisms (hole and electron storage) and characterizations (electron storage behaviors, release behaviors and storage capacity) has been first introduced. Importantly, the remediation performance and mechanism of continuous photocatalysis for environmental applications are qualitatively and quantitatively demonstrated, including chemical pollutant oxidation and reduction, microbial pathogen inactivation, and multifunctional treatment. In addition, key factors influencing its remediation performance are analyzed, for the first time, from both operational and environmental views. The ample opportunities in the field of continuous photocatalysis for sustainable environmental remediation are also pointed out, calling for more efforts to fill current knowledge gaps in the future.

Syntheses and structure of dinuclear metal complexes containing naphthyl-Ir bichromophore

A series of novel metal complexes were synthesized containing an Ir-cyclometalated bichromophore as a visible-light sensitizer. A new bichromophoric unit containing a naphthyl substituent and methyl substituents on the 2-phenylpyridine chelating ligand was synthesized and characterized for the first time. According to the increased crystallinity of the bichromophoric unit, novel Ir-M metal complexes (M = Pd, Mn, and Ir) were synthesized and fully characterized. The novel Ir-Pd complex maintained photocatalytic activity toward styrenes under visible-light irradiation, and polymerization with p-chlorostyrene, copolymerization with styrene and p-chlorostyrene furnished corresponding polymers.

Role of Triplet States in the Photodynamics of Aniline

The dynamics of excited heteroaromatic molecules is a key to understanding the photoprotective properties of many biologically relevant chromophores that dissipate their excitation energy nonreactively and thereby prevent the detrimental effects of ultraviolet radiation. Despite their structural variability, most substituted aromatic compounds share a common feature of a repulsive ¹πσ* potential energy surface. This surface can lead to photoproducts, and it can also facilitate the population transfer back to the ground electronic state by means of a ¹πσ*/S₀ conical intersection. Here, we explore a hidden relaxation route involving the triplet electronic state of aniline, which has recently been discovered by means of time-selected photofragment translational spectroscopy [J. Chem. Phys. 2019, 151, 141101]. By using the recently available analytical gradients for multiconfiguration pair-density functional theory, it is now possible to locate the minimum-energy crossing points between states of different spin and therefore compute the intersystem crossing rates with a multireference method, rather than with the less reliable single-reference methods. Using such calculations, we demonstrate that the population loss of aniline in the T₁(³ππ*) state is dominated by C₆H₅NH₂ → C₆H₅NH· + H· dissociation, and we explain the long nonradiative lifetimes of the T₁(³ππ*) state at the excitation wavelengths of 294-264 nm.

Photodriven Charge Accumulation and Carrier Dynamics in a Water-Soluble Carbon Nitride Photocatalyst

Charge accumulation in photoactive molecules and materials holds great promise in solar energy conversion as it allows for decoupling solar-driven charging from (dark) redox reactions. In this contribution, light-driven charge accumulation was investigated for a recently reported novel water-soluble carbon nitride [K,Na-poly(heptazine imide); K,Na-PHI] photocatalyst, which exhibits excellent activity and stability in highly selective photocatalytic oxidation of alcohols and concurrent reduction of dioxygen to H2 O2 under quasi-homogeneous conditions. An excellent charge storage ability of the K,Na-PHI material was demonstrated, showing an optimal density of accumulated electrons (32.2 μmol of electrons per gram) in the presence of 10 vol % MeOH as a sacrificial electron donor. The long-lived electrons accumulated under anaerobic conditions as K,Na-PHI.- radical ions were utilized in interfacial electron transfer to O2 or methyl viologen in a subsequent dark reaction. Ultrafast time-resolved spectroscopy was employed to reveal the kinetics of charge-carrier recombination and methanol oxidation. Geminate recombination of electrons and holes within approximately 100 ps was followed by trap-assisted recombination. The presence of methanol as a sacrificial electron donor accelerated the decay of the transient absorption signal when a static sample was used. This behavior was ascribed to the faster charge recombination in the presence of the radical anions generated after hole extraction. The work suggests that photodriven electron storage in the water-soluble carbon nitride is enabled by localized trap states, and highlights the importance of the effective electron donor for creating long-lived photo-generated carbon nitride radicals.

Cross-Coupled Phenyl- and Alkynyl-Based Phenanthrolines and Their Effect on the Photophysical and Electrochemical Properties of Heteroleptic Cu(I) Photosensitizers

With the aims of increasing the antenna system and improving the photophysical properties of Cu(I)-based photosensitizers, the backbone of 2,9-dimethyl-1,10-phenanthroline was selectively extended in the 5,6-position. Applying specifically tailored Suzuki-Miyaura and "chemistry-on-the-complex" Sonogashira cross-coupling reactions enabled the development of two sets of structurally related diimine ligands with a broad variety of different phenyl- and alkynyl-based substituents. The resulting 11 novel heteroleptic Cu(I) complexes, including five solid-state structures, were studied with respect to their structure-property relationships. Both sets of substituents are able to red-shift the absorption maxima and to increase the absorptivity. For the alkynyl-based complexes, this is accompanied by a significant anodic shift of the reduction potentials. The phenyl-based substituents strongly influence the emission wavelength and quantum yield of the resulting Cu(I) complexes and lead to an increase in the emission lifetime of up to 504 ns, which clearly indicates competition with the benchmark system [(xantphos)Cu(bathocuproine)]PF₆.