Controlled Diffusion of Photoswitchable Receptors by Binding Anti-electrostatic Hydrogen-Bonded Phosphate Oligomers

Redefined ion association constants have consequences for calcium phosphate nucleation and biomineralization

Calcium orthophosphates (CaPs), as hydroxyapatite (HAP) in bones and teeth are the most important biomineral for humankind. While clusters in CaP nucleation have long been known, their speciation and mechanistic pathways to HAP remain debated. Evidently, mineral nucleation begins with two ions interacting in solution, fundamentally underlying solute clustering. Here, we explore CaP ion association using potentiometric methods and computer simulations. Our results agree with literature association constants for Ca2+ and H2PO4-, and Ca2+ and HPO42-, but not for Ca2+ and PO43- ions, which previously has been strongly overestimated by two orders of magnitude. Our data suggests that the discrepancy is due to a subtle, premature phase separation that can occur at low ion activity products, especially at higher pH. We provide an important revision of long used literature constants, where association of Ca2+ and PO43- actually becomes negligible below pH 9.0, in contrast to previous values. Instead, [CaHPO4]0 dominates the aqueous CaP speciation between pH ~6-10. Consequently, calcium hydrogen phosphate association is critical in cluster-based precipitation in the near-neutral pH regime, e.g., in biomineralization. The revised thermodynamics reveal significant and thus far unexplored multi-anion association in computer simulations, constituting a kinetic trap that further complicates aqueous calcium phosphate speciation.

Switchable molecular tweezers: design and applications

Switchable molecular tweezers are a unique class of molecular switches that, like their macroscopic analogs, exhibit mechanical motion between an open and closed conformation in response to stimuli. Such systems constitute an essential component of artificial molecular machines. This review will present selected examples of switchable molecular tweezers and their potential applications. The first part will be devoted to chemically responsive tweezers, including stimuli such as pH, metal coordination, and anion binding. Then, redox-active and photochemical tweezers will be presented.

Automated Structural Activity Screening of β-Diketonate Assemblies with High-Throughput Ion Mobility-Mass Spectrometry

Embracing complexity in design, metallo-supramolecular self-assembly presents an opportunity for fabricating materials of economic significance. The array of accessible supramolecules is alluring, along with favourable energy requirements. Implementation is hampered by an inability to efficiently characterise complex mixtures. The stoichiometry, size, shape, guest binding properties and reactivity of individual components and combinations thereof are inherently challenging to resolve. A large combinatorial library of four transition metals (Fe, Cu, Ni and Zn), and six β-diketonate ligands at different molar ratios and pH was robotically prepared and directly analysed over multiple timepoints with electrospray ionisation travelling wave ion mobility-mass spectrometry. The dataset was parsed for self-assembling activity without first attempting to structurally assign individual species. Self-assembling systems were readily categorised without manual data-handling, allowing efficient screening of self-assembly activity. This workflow clarifies solution phase supramolecular assembly processes without manual, bottom-up processing. The complex behaviour of the self-assembling systems was reduced to simpler qualities, which could be automatically processed.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Photoswitchable Quadruple Hydrogen-Bonding Motif

Multiple hydrogen-bonding motifs serve as important building blocks for molecular recognition and self-assembly. Herein, a photoswitchable quadruple hydrogen-bonding motif featuring near-complete, reversible, and thermostable conversion between DADA and AADD arrays associated with an alteration of their dimerization constants by over 3 orders of magnitude is reported. The system is based on a diarylethene featuring a ureidopyrimidin-4-ol moiety, which upon photoinduced ring closure and associated loss of aromaticity undergoes enol-keto tautomerization to a ureidopyrimidinone moiety. The latter causes a transformation of the hydrogen-bonding arrays and significantly weakens the free energy of dimerization in the case of the closed isomer. This photoswitchable quadruple hydrogen-bonding motif should allow us to spatially and temporarily direct self-assembly and supramolecular polymerization processes by light.

A library of vinyl phosphonate anions dimerize with cyanostars, form supramolecular polymers and undergo statistical sorting

Supramolecular dimers are elementary units allowing the build-up of multi-molecule architectures. New among these are cyanostar-stabilized dimers of phosphate and phosphonate anions. While the anion dimerization at the heart of these assemblies is reliable, the covalent synthesis leading to this class of designer anions serves as a bottleneck in the pathway to supramolecular assemblies. Herein, we demonstrate the reliable synthesis of 14 diverse anionic monomers by Heck coupling between vinyl phosphonic acid and aryl bromide compounds. When this synthesis is combined with reliable anion dimerization, we show formation of supramolecular dimers and polymers by co-assembly with cyanostar macrocycles. The removal of the covalent bottleneck opened up a seamless synthetic route to iterate through three monomers affording the solubility needed to characterize the mechanism of supramolecular polymerization. We also test the idea that the small size of these vinyl phosphonates provide identical dimer stabilities across the library by showing how mixtures of anions undergo statistical (social) self-sorting. We exploit this property by preparing soluble copolymers from the mixing of different monomers. This multi-anion assembly shows the utility of a library for programming properties.

Stimulus-Controlled Anion Binding and Transport by Synthetic Receptors

Anionic species are omnipresent and involved in many important biological processes. A large number of artificial anion receptors has therefore been developed. Some of these are capable of mediating transmembrane transport. However, where transport proteins can respond to stimuli in their surroundings, creation of synthetic receptors with stimuli-responsive functions poses a major challenge. Herein, we give a full overview of the stimulus-controlled anion receptors that have been developed thus far, including their application in membrane transport. In addition to their potential operation as membrane carriers, the use of anion recognition motifs in forming responsive membrane-spanning channels is discussed. With this review article, we intend to increase interest in transmembrane transport among scientists working on host-guest complexes and dynamic functional systems in order to stimulate further developments.

Sterically Hindered Stiff-Stilbene Photoswitch Offers Large Motions, 90% Two-Way Photoisomerization, and High Thermal Stability

Molecular photoswitches have been widely used as molecular machines in various fields due to the small structures and simple motions generated in reversible isomerization. However, common photoswitches, as represented by azobenzene (AB), cannot combine both large motions and high thermal stability, which are critically important for some practical applications in addition to high photoisomerization yields. Here, we focus on a promising photoswitch, stiff stilbene (SS), and its derivative, sterically hindered SS (HSS). The detailed investigation of their performance with a comparison to AB demonstrated that HSS is an outstanding photoswitch offering larger motions than AB and SS, ca. 90% photoisomerization in both E-to-Z and Z-to-E directions, and significantly high thermal stability with a half-life of ca. 1000 years at room temperature. The superior performance of HSS promises its use in various applications, even where previous photoswitches have troubles and are unavailable.

Photoswitchable molecular tweezers: isomerization to control substrate binding, and what about vice versa?

The linkage of two identical binding motifs by a molecular photoswitch has proven to be a straightforward and versatile strategy to control substrate binding affinity by light. Stimulus control of binding properties in artificial receptors is partly inspired by the dynamic behavior of proteins and is highly attractive as it could, for example, improve extraction processes and allow (de)activation of membrane transport on demand. This feature article summarizes the development and design principles of molecular tweezers containing a molecular photoswitch as the core unit. Besides the control of binding affinity by isomerization, the effect of substrate binding on the isomerization behavior is discussed where data is available. While the latter often receives less attention, it could be of benefit in the future creation of multi-stimuli-controlled molecular switching and machine-like systems.

Visible‐Light‐Responsive Self‐Assembled Complexes: Improved Photoswitching Properties by Metal Ion Coordination**

A photoswitchable ligand based on azobenzene is self‐assembled with palladium(II) ions to form a [Pd₂(E‐L)₄]⁴⁺ cage. Irradiation with 470 nm light results in the near‐quantitative switching to a monomeric species [Pd(Z‐L)₂]²⁺, which can be reversed by irradiation with 405 nm light, or heat. The photoswitching selectivity towards the metastable isomer is significantly improved upon self‐assembly, and the thermal half‐life is extended from 40 days to 850 days, a promising approach for tuning photoswitching properties.

Aqueous Supramolecular Co-Assembly of Anionic and Cationic Photoresponsive Stiff-Stilbene Amphiphiles

Fabrication of macroscopic soft functional materials, such as macroscopic photoresponsive soft materials and artificial muscles, can be commonly prepared by charge screening of supramolecular assemblies with inorganic salt solutions using a shear-flow method. However, some of the charged end-groups of photoresponsive molecular amphiphiles cannot be stabilized with inorganic salt solutions to fabricate macroscopic soft materials. We design and synthesize stiff stilbene amphiphiles (SAs) functionalized with anionic phosphite and cationic quaternary ammonium end groups and determine their photochemical and supramolecular assembly properties. Supramolecular co-assembly of anionic and cationic nanotubes of SAs allows to transform into nanoribbons, confirmed by TEM, CAC, and Zeta potential measurements. Nanoribbons of anionic and cationic SAs can be prepared into macroscopic soft materials with inorganic salt solutions and surprisingly also with deionized water. The macroscopic soft material of anionic and cationic SAs can be stabilized at low concentration ∼5 mM. Meanwhile, the photoresponsiveness of the macroscopic soft materials is retained to provide macroscopic morphological change upon photoirradiation. These results exhibit the feasibility in fabrication of macroscopic functional soft materials from supramolecular assembly across multiple length-scale without help of inorganic salts and offer ample opportunity in developing future soft supramolecular robotic systems. This article is protected by copyright. All rights reserved.

Visible-Light Switching of Metallosupramolecular Assemblies

A photoswitchable ligand and palladium(II) ions form a dynamic mixture of self-assembled metallosupramolecular structures. The photoswitching ligand is an ortho-fluoroazobenzene with appended pyridyl groups. Combining the E-isomer with palladium(II) salts affords a double-walled triangle with composition [Pd3 L6 ]6+ and a distorted tetrahedron [Pd4 L8 ]8+ (1 : 2 ratio at 298 K). Irradiation with 410 nm light generates a photostationary state with approximately 80 % of the E-isomer of the ligand and results in the selective disassembly of the tetrahedron, the more thermodynamically stable structure, and the formation of the triangle, the more kinetically inert product. The triangle is then slowly transformed back into the tetrahedron over 2 days at 333 K. The Z-isomer of the ligand does not form any well-defined structures and has a thermal half-life of 25 days at 298 K. This approach shows how a thermodynamically preferred self-assembled structure can be reversibly pumped to a kinetic trap by small perturbations of the isomer distribution using non-destructive visible light.

Rapid Online Analysis of Photopolymerization Kinetics and Molecular Weight Using Diffusion NMR

Online, high-throughput molecular weight analysis of polymerizations is rare, with most studies relying on tedious sampling techniques and batchwise postanalysis. The ability to track both monomer conversion and molecular weight evolution in real time could underpin precision polymer development and facilitate study of rapid polymerization reactions. Here, we use a single time-resolved diffusion nuclear magnetic resonance (NMR) experiment to simultaneously study the kinetics and molecular weight evolution during a photopolymerization, with in situ irradiation inside the NMR instrument. As a model system, we used a photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The data allow diffusion coefficients and intensities to be calculated every 14 s from which the polymer size and monomer conversion can be extracted. Key to this approach is (1) the use of shuffled gradient amplitudes in the diffusion NMR experiment to access reactions of any rate, (2) the addition of a relaxation agent to increase achievable time resolution and, (3) a sliding correction that accounts for viscosity changes during polymerization. Diffusion NMR offers a uniquely simple, translatable handle for online monitoring of polymerization reactions.

Photomodulation of Transmembrane Transport and Potential by Stiff-Stilbene Based Bis(thio)ureas

Membrane transport proteins fulfill important regulatory functions in biology with a common trait being their ability to respond to stimuli in the environment. Various small-molecule receptors, capable of mediating transmembrane transport, have been successfully developed. However, to confer stimuli-responsiveness on them poses a fundamental challenge. Here we demonstrate photocontrol of transmembrane transport and electric potential using bis(thio)ureas derived from stiff-stilbene. UV-vis and 1H NMR spectroscopy are used to monitor E-Z photoisomerization of these bis(thio)ureas and 1H NMR titrations reveal stronger binding of chloride to the (Z)-form than to the (E)-form. Additional insight into the binding properties is provided by single crystal X-ray crystallographic analysis and DFT geometry optimization. Importantly, the (Z)-isomers are much more active in transmembrane transport than the respective (E)-isomers as shown through various assays. As a result, both membrane transport and depolarization can be modulated upon irradiation, opening up new prospects toward light-based therapeutics as well as physiological and optopharmacological tools for studying anion transport-associated diseases and to stimulate neuronal activity, respectively.

Anti-Electrostatic Pi-Hole Bonding: How Covalency Conquers Coulombics

Intermolecular bonding attraction at π-bonded centers is often described as "electrostatically driven" and given quasi-classical rationalization in terms of a "pi hole" depletion region in the electrostatic potential. However, we demonstrate here that such bonding attraction also occurs between closed-shell ions of like charge, thereby yielding locally stable complexes that sharply violate classical electrostatic expectations. Standard DFT and MP2 computational methods are employed to investigate complexation of simple pi-bonded diatomic anions (BO-, CN-) with simple atomic anions (H-, F-) or with one another. Such "anti-electrostatic" anion-anion attractions are shown to lead to robust metastable binding wells (ranging up to 20-30 kcal/mol at DFT level, or still deeper at dynamically correlated MP2 level) that are shielded by broad predissociation barriers (ranging up to 1.5 Å width) from long-range ionic dissociation. Like-charge attraction at pi-centers thereby provides additional evidence for the dominance of 3-center/4-electron (3c/4e) nD-π*AX interactions that are fully analogous to the nD-σ*AH interactions of H-bonding. Using standard keyword options of natural bond orbital (NBO) analysis, we demonstrate that both n-σ* (sigma hole) and n-π* (pi hole) interactions represent simple variants of the essential resonance-type donor-acceptor (Bürgi-Dunitz-type) attraction that apparently underlies all intermolecular association phenomena of chemical interest. We further demonstrate that "deletion" of such π*-based donor-acceptor interaction obliterates the characteristic Bürgi-Dunitz signatures of pi-hole interactions, thereby establishing the unique cause/effect relationship to short-range covalency ("charge transfer") rather than envisioned Coulombic properties of unperturbed monomers.

Search for an exothermic halogen bond between anions

A halogen-bonded complex containing a pair of anions can be made more stable than the isolated anions if the Lewis acid is a long carbon chain, fully substituted by CN groups, with an I atom on one end and a COO− group on the other, with Cl− as base.

Inter-anion chalcogen bonds: Are they anti-electrostatic in nature?

Inter-anion hydrogen and halogen bonds have emerged as counterintuitive linkers and inspired us to expand the range of this unconventional bonding pattern. Here, the inter-anion chalcogen bond (IAChB) was proposed and theoretically analyzed in a series of complexes formed by negatively charged bidentate chalcogen bond donors with chloride anions. The kinetic stability of IAChB was evidenced by the minima on binding energy profiles and further supported by ab initio molecular dynamic simulations. The block-localized wave function (BLW) method and its subsequent energy decomposition (BLW-ED) approach were employed to elucidate the physical origin of IAChB. While all other energy components vary monotonically as anions get together, the electrostatic interaction behaves exceptionally as it experiences a Coulombic repulsion barrier. Before reaching the barrier, the electrostatic repulsion increases with the shortening Ch⋯Cl^- distance as expected from classical electrostatics. However, after passing the barrier, the electrostatic repulsion decreases with the Ch⋯Cl^- distance shortening and subsequently turns into the most favorable trend among all energy terms at short ranges, representing a dominating force for the kinetic stability of inter-anions. For comparison, all energy components exhibit the same trends and vary monotonically in the conventional counterparts where donors are neutral. By comparing inter-anions and their conventional counterparts, we found that only the electrostatic energy term is affected by the extra negative charge. Remarkably, the distinctive (nonmonotonic) electrostatic energy profiles were reproduced using quantum mechanical-based atomic multipoles, suggesting that the crucial electrostatic interaction in IAChB can be rationalized within the classical electrostatic theory just like conventional non-covalent interactions.

Following Molecular Mobility during Chemical Reactions: No Evidence for Active Propulsion

The reported changes in self-diffusion of small molecules during reactions have been attributed to "boosted mobility". We demonstrate the critical role of changing concentrations of paramagnetic ions on nuclear magnetic resonance (NMR) signal intensities, which led to erroneous measurements of diffusion coefficients. We present simple methods to overcome this problem. The use of shuffled gradient amplitudes allows accurate diffusion NMR measurements, even with time-dependent relaxation rates caused by changing concentrations of paramagnetic ions. The addition of a paramagnetic relaxation agent allows accurate determination of both diffusion coefficients and reaction kinetics during a single experiment. We analyze a copper-catalyzed azide-alkyne cycloaddition "click" reaction, for which boosted mobility has been claimed. With our methods, we accurately measure the diffusive behavior of the solvent, starting materials, and product and find no global increase in diffusion coefficients during the reaction. We overcome NMR signal overlap using an alternative reducing agent to improve the accuracy of the diffusion measurements. The alkyne reactant diffuses slower as the reaction proceeds due to binding to the copper catalyst during the catalytic cycle. The formation of this intermediate was confirmed by complementary NMR techniques and density functional theory calculations. Our work calls into question recent claims that molecules actively propel or swim during reactions and establishes that time-resolved diffusion NMR measurements can provide valuable insight into reaction mechanisms.

Photoresponsive macrocycles for selective binding and release of sulfate

A series of new photoresponsive macrocyclic anion receptors were synthesized via integration of an azobenzene unit and multiple anion binding sites. They exhibited highly selective binding to dianionic sulfate over other tested anions and the reversible release of sulfate could be triggered by visible light as inferred from mass spectroscopy, crystallographical analysis, NMR spectroscopy, and theoretical calculations.

Classical Electrostatics Remains the Driving Force for Interanion Hydrogen and Halogen Bonding

Interanion hydrogen bonding (IAHB) and halogen bonding (IAXB) have emerged as a counterintuitive linker in a range of fascinating applications. Despite the overall repulsive (positive) binding energy, anions are trapped in a local minimum with its corresponding transition state (TS) preventing dissociation. In other words, the adduct of anions is metastable. Seemingly, the electrostatic paradigm and force field description of hydrogen/halogen bonding (HB/XB) are challenged, because of the preconceived Coulombic repulsion. Aiming at an insightful understanding of these interanion phenomena, we employed the energy decomposition approach based on the block-localized wavefunction method (BLW-ED) to investigate a series of exemplary interanion complexes. As expected, the key distinction from the conventional HB/XB lies in the electrostatic interaction, which is not increasingly repulsive as anions gradually approach to each other. Rather, there is a Coulombic barrier at a certain point. After this point, the electrostatic repulsion diminishes with the decreasing distance between anions. Differently, other energy components vary monotonically just like in conventional cases. The nonmonotonic characteristic of the electrostatic interaction in interanion complexes was reproduced using the multipole expansion in AMOEBA polarizable force field in which the state-specified atomic multipoles were adopted. This suggests that the nonmonotonicity can be well interpreted by classical electrostatic theory and there is no conceptual difference between conventional HB/XB and IAHB/IAXB. The stability of IAHB/IAXB depends on the competition between the local attractive HB/XB and the global Coulombic repulsion of net charges, though there is cooperativity between these two contrasting forces. This concise model was supported by the attractive IAHB/IAXB in modified molecular capsules, which exhibit strong quadruple HB/XBs and a considerable distance between charged substituents.

A Comprehensive Picture of the Structures, Energies, and Bonding in the Alanine Dimers

High level quantum mechanical computations and extensive stochastic searches of the potential energy surfaces of the Alanine dimers uncover rich and complex structural and interaction landscapes. A total of 416 strongly bound (up 13.4 kcal mol^-1 binding energies at the DLPNO-CCSD(T)/6-311++G(d,p) level corrected by the basis set superposition error and by the zero point vibrational energies over B3LYP-D3 geometries), close energy equilibrium structures were located, bonded via 32 specific types of intermolecular contacts including Y⋅⋅⋅H-X primary and Y⋅⋅⋅H-C secondary hydrogen bonds, H⋅⋅⋅H dihydrogen contacts, and non conventional anti-electrostatic Y δ - ⋯ X δ - interactions. The putative global minimum is triply degenerate, corresponding to the structure of the common dimer of a carboxylic acid. All quantum descriptors of chemical bonding point to a multitude of weak individual interactions within each dimer, whose cumulative effect results in large binding energies and in an attractive fluxional wall of non-covalent interactions in the interstitial region between the monomers.

Push-Pull Stiff-Stilbene: Proton-Gated Visible-Light Photoswitching and Acid-Catalyzed Isomerization

Donor‐acceptor substituted stiff‐stilbene is shown to undergo isomerization induced by visible light avoiding the need for harmful UV light. This visible‐light photoswitching is inhibited by protonation of the dimethylamino‐donor unit, disrupting the push‐pull character and thus, gating of the photochromic properties is allowed by acid/base addition. Remarkably, the addition of a mild acid also triggers fast thermal back‐isomerization, which is unprecedented for stiff‐stilbene photoswitches usually having a very high energy barrier for this process. These combined features offer unique orthogonal control over switching behavior by light and protonation, which is investigated in detail by ¹H NMR and UV/Vis spectroscopy. In addition, TD‐DFT calculations are used to gain further insight into the absorption properties. Our results will help elevating the level of control over dynamic behavior in stiff‐stilbene applications.

Protonation and anion-binding properties of aromatic sulfonylurea derivatives

In this work the anion-binding properties of three aromatic sulfonylurea derivatives in acetonitrile and dimethyl sulfoxide were explored by means of NMR titrations. It was found that the studied receptors effectively bind anions of low basicity (Cl^-, Br^-, I^-, NO₃ ^- and HSO₄ ^-). The stoichiometry of the complexes with receptors containing one binding site was 1 : 1 exclusively, whereas in the case of the receptor containing two sulfonylurea groups 1 : 2 (receptor : anion) complexes were also detected in some cases. The presence of strongly basic anions (acetate and dihydrogen phosphate) led to the deprotonation of the sulfonylurea moiety. This completely hindered its anion-binding properties in DMSO and only proton transfer occurred upon the addition of basic anions to the studied receptors. In MeCN, a complex system of equilibria including both ligand deprotonation and anion binding was established. Since ionisation of receptors was proven to be a decisive factor defining the behaviour of the sulfonylurea receptors, their pK _a values were determined using several deprotonation agents in both solvents. The results were interpreted in the context of receptor structures and solvent properties and applied for the identification of the interactions with basic anions.

Sulfoxide hemithioindigo tweezers - visible light addressable capture and release

Introducing responsive elements into supramolecular recognition systems offers great advantages for the control of intermolecular interactions and represents an important stepping stone towards multi-purpose and reprogrammable synthetic systems. Of particular interest is implementation of light-responsiveness because of the unique ease and precision of this signal. Here we present visible light responsive hemithioindigo-based molecular tweezers that bear a highly polar sulfoxide function as an additional recognition unit inside their binding site. Sulfur oxidation allows to simultaneously enhance all crucial properties of this receptor type i.e. photoswitching capability, thermal stability of individual switching states, binding affinity, and binding modulation upon switching. With a novel titration method the thermodynamic binding parameters were determined using reduced sample amounts. Employing these strongly enhanced molecular tweezers allowed to demonstrate photocontrol of intermolecular charge transfer in a reversible manner.

Hemithioindigo based molecular tweezers with a comprehensively improved property profile are obtained by simple oxidation of the sulfur atom.