Proton-Induced Disproportionation of Jahn-Teller-Active Transition-Metal Ions in Oxides Due to Electronically Driven Lattice Instability

Reconfiguring the Hydrogen Networks of Aqueous Electrolyte to Stabilize Iron Hexacyanoferrate for High-Voltage pH-Decoupled Cell

Prussian blue analogs (PBAs) are promising insertion-type cathode materials for different types of aqueous batteries, capable of accommodating metal or non-metal ions. However, their practical application is hindered by their susceptibility to dissolution, which leads to a shortened lifespan. Herein, we have revealed that the dissolution of PBAs primarily originates from the locally elevated pH of electrolytes, which is caused by the proton co-insertion during discharge. To address this issue, the water-locking strategy has been implemented, which interrupts the generation and Grotthuss diffusion of protons by breaking the well-connected hydrogen bonding network in aqueous electrolytes. As a result, the hybrid electrolyte enables the iron hexacyanoferrate to endure over 1000 cycles at a 1 C rate and supports a high-voltage pH-decoupled cell with an average voltage of 1.95 V. These findings provide insights for mitigating the dissolution of electrode materials, thereby enhancing the viability and performance of aqueous batteries.

Interfacial chemistry in multivalent aqueous batteries: fundamentals, challenges, and advances

As one of the most promising electrochemical energy storage systems, aqueous batteries are attracting great interest due to their advantages of high safety, high sustainability, and low costs when compared with commercial lithium-ion batteries, showing great promise for grid-scale energy storage. This invited tutorial review aims to provide universal design principles to address the critical challenges at the electrode-electrolyte interfaces faced by various multivalent aqueous battery systems. Specifically, deposition regulation, ion flux homogenization, and solvation chemistry modulation are proposed as the key principles to tune the inter-component interactions in aqueous batteries, with corresponding interfacial design strategies and their underlying working mechanisms illustrated. In the end, we present a critical analysis on the remaining obstacles necessitated to overcome for the use of aqueous batteries under different practical conditions and provide future prospects towards further advancement of sustainable aqueous energy storage systems with high energy and long durability.

Inducing weak and negative Jahn-Teller distortions to alleviate structural deformations for stable sodium storage

In the quest for efficient supercapacitor materials, manganese-based layered oxide cathodes stand out for their cost-effectiveness and high theoretical capacity. However, their progress is hindered by the Jahn-Teller (J-T) distortion due to the unavoidable Mn4+ to Mn3+ reduction during ion storage processes. Our study addresses this challenge by stabilizing the K0.5MnO2 cathode through strategic Mg2+ substitution. This substitution leads to an altered Mn3+ electronic configuration, effectively mitigating the strong J-T distortion during ion storage processes. We provide a comprehensive analysis combining experimental evidence and theoretical insights, highlighting the emergence of the weak and negative J-T effects with reduced structural deformation during electrochemical cycling. Our findings reveal that the K0.5Mn0.85Mg0.15O2 cathode exhibits remarkable durability, retaining 96.0% of initial capacitance after 8000 cycles. This improvement is attributed to the specific electronic configurations of Mn3+ ions, which play a crucial role in minimizing volumetric changes and counteracting structural deformation typically induced by the strong J-T distortion. Our study not only advances the understanding of managing J-T distortion in manganese-based cathodes but also opens new avenues for designing high-stability supercapacitors and other energy storage devices by tailoring electrode materials based on their electronic configurations.

Thermodynamically spontaneously intercalated H3O+ enables LiMn2O4 with enhanced proton tolerance in aqueous batteries

LiMn2O4 (LMO) is an attractive positive electrode material for aqueous lithium-ion batteries (ALIBs), but its inferior cycle performance limits the practical application. The degradation mechanism of LMO in ALIBs is still unclear, resulting in inability to predictably improve its structural stability. The electrode/electrolyte interface is believed to play an important role in electrode degradation. However, the interactions of the water-containing electrode/electrolyte interface of LMO are underexplored. In this work, we demonstrate the insertion of H3O+ into LMO during cycling in aqueous electrolyte and elucidate the paradoxical effects of H3O+. The crystal H3O+ enhances the structural stability of LMO by forming a gradient Mn4+-rich protective shell, but an excess amount of crystal H3O+ leads to poor Li+ conductivity, resulting in rapid capacity fading. Combining electrochemical analyses, structural characterizations, and first-principles calculations, we reveal the intercalation of H3O+ into LMO and its associated mechanism on the structural evolution of LMO. Furthermore, we regulate the crystal H3O+ content in LMO by modifying the hydrogen bond networks of aqueous electrolyte to restrict H2O molecule activity. This approach utilizes an appropriate amount of crystal H3O+ to enhance the structural stability of LMO while maintaining sufficient Li+ diffusion.

Manipulating disorder within cathodes of alkali-ion batteries

The fact that ordered materials are rarely perfectly crystalline is widely acknowledged among materials scientists, but its impact is often overlooked or underestimated when studying how structure relates to properties. Various investigations demonstrate that intrinsic and extrinsic defects, and disorder generated by physicochemical reactions, are responsible for unexpectedly detrimental or beneficial functionalities. The task remains to modulate the disorder to produce desired properties in materials. As disorder is often correlated with local interactions, it is controllable. In this Review, we explore the structural disorder in cathode materials as a novel approach for improving their electrochemical performance. We revisit cathode materials for alkali-ion batteries and outline the origins and beneficial consequences of disorder. Focusing on layered, cubic rocksalt and other metal oxides, we discuss how disorder improves electrochemical properties of cathode materials and which interactions generate the disorder. We also present the potential pitfalls of disorder that must be considered. We conclude with perspectives for enhancing the electrochemical performance of cathode materials by using disorder.

Activation of MnO6 Units via an Interfacial Electric Field: Electron Injection into Mn t2g for Rapid and Stable Sodium Ion Storage in CeO2/MnOx

Manganese-based oxides (MnOx) suffer from sluggish charge diffusion kinetics and poor cycling stability in sodium ion storage. Herein, an interfacial electric field (IEF) in CeO2/MnOx is constructed to obtain high electronic/ionic conductivity and structural stability of MnOx. The as-designed CeO2/MnOx exhibits a remarkable capacity of 397 F g-1 and favorable cyclic stability with 92.13% capacity retention after 10,000 cycles. Soft X-ray absorption spectroscopy and partial density of states results reveal that the electrons are substantially injected into the Mn t2g orbitals driven by the formed IEF. Correspondingly, the MnO6 units in MnOx are effectively activated, endowing the CeO2/MnOx with fast charge transfer kinetics and high sodium ion storage capacity. Moreover, In situRaman verifies a remarkably increased structural stability of CeO2/MnOx, which is attributed to the enhanced Mn─O bond strength and efficiently stabilized MnO6 units. Mechanism studies show that the downshift of Mn 3d-band center dramatically increases the Mn 3d-O 2p orbitals overlap, thus inhibiting the Jahn-Teller (J-T) distortion of MnOx during sodium ion insertion/extraction. This work develops an advanced strategy to achieve both fast and sustainable sodium ion storage in metal oxides-based energy materials.

Delineating the Impact of Transition-Metal Crossover on Solid-Electrolyte Interphase Formation with Ion Mass Spectrometry

Lithium-metal batteries (LMB) employing cobalt-free layered-oxide cathodes are a sustainable path forward to achieving high energy densities, but these cathodes exhibit substantial transition-metal dissolution during high-voltage cycling. While transition-metal crossover is recognized to disrupt solid-electrolyte interphase (SEI) formation on graphite anodes, experimental evidence is necessary to demonstrate this for lithium-metal anodes. In this work, advanced high-resolution 3D chemical analysis is conducted with time-of-flight secondary-ion mass spectrometry (TOF-SIMS) to establish spatial correlations between the transition metals and electrolyte decomposition products found on cycled lithium-metal anodes. Insights into the localization of various chemistries linked to crucial processes that define LMB performance, such as lithium deposition, SEI growth, and transition-metal deposition are deduced from a precise elemental and spatial analysis of the SEI. Heterogenous transition-metal deposition is found to perpetuate both heterogeneous SEI growth and lithium deposition on lithium-metal anodes. These correlations are confirmed across various lithium-metal anodes that are cycled with different cobalt-free cathodes and electrolytes. An advanced electrolyte that is stable to higher voltages is shown to minimize transition-metal crossover and its effects on lithium-metal anodes. Overall, these results highlight the importance of maintaining uniform SEI coverage on lithium-metal anodes, which is disrupted by transition-metal crossover during operation at high voltages.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

High Flux and Stability of Cationic Intercalation in Transition-Metal Oxides: Unleashing the Potential of Mn t2g Orbital via Enhanced π-Donation

Transition-metal oxides (TMOs) often struggle with challenges related to low electronic conductivity and unsatisfactory cyclic stability toward cationic intercalation. In this work, we tackle these issues by exploring an innovative strategy: leveraging heightened π-donation to activate the t2g orbital, thereby enhancing both electron/ion conductivity and structural stability of TMOs. We engineered Ni-doped layered manganese dioxide (Ni-MnO2), which is characterized by a distinctive Ni-O-Mn bridging configuration. Remarkably, Ni-MnO2 presents an impressive capacitance of 317 F g-1 and exhibits a robust cyclic stability, maintaining 81.58% of its original capacity even after 20,000 cycles. Mechanism investigations reveal that the incorporation of Ni-O-Mn configurations stimulates a heightened π-donation effect, which is beneficial to the π-type orbital hybridization involving the O 2p and the t2g orbital of Mn, thereby accelerating charge-transfer kinetics and activating the redox capacity of the t2g orbital. Additionally, the charge redistribution from Ni to the t2g orbital of Mn effectively elevates the low-energy orbital level of Mn, thus mitigating the undesirable Jahn-Teller distortion. This results in a subsequent decrease in the electron occupancy of the π*-antibonding orbital, which promotes an overall enhancement in structural stability. Our findings pave the way for an innovative paradigm in the development of fast and stable electrode materials for intercalation energy storage by activating the low orbitals of the TM center from a molecular orbital perspective.

Jahn-Teller distortion in Sr2FeO4: group-theoretical analysis and hybrid DFT calculations

We present theoretical justification for distorted Ruddlesden-Popper (RP) phases of the first-order by using hybrid density functional theory (DFT) calculations and group-theoretical analysis. We, thus, demonstrate the existence of the Jahn-Teller effect around an Fe[Formula: see text] ion in Sr[Formula: see text]FeO[Formula: see text]. On the calculation side, we have established a combination of Wu-Cohen (WC) exchange and Perdew-Wang (PW) correlation in a three-parameter functional WC3PW, giving the most accurate description of Sr[Formula: see text]FeO[Formula: see text] from the comparison of three hybrid DFT functionals. Self-consistently obtained Hartree-Fock exact exchange of 0.16 demonstrates consistent results with the experimental literature data. Importantly, we explain conditions for co-existing proper and pseudo-Jahn-Teller effects from the crystalline orbitals, symmetry-mode analysis and irreps products. Moreover, phonon frequency calculations support and confirm the results of symmetry-mode analysis. In particular, the symmetry-mode analysis identifies a dominating irreducible representation of the Jahn-Teller mode (X2+) and corresponding space group (SG) of ground state structure (SG Cmce model). Therefore, the usually suggested high-symmetry tetragonal crystal structure (SG I4/mmm model) is higher in energy by 121 meV/f.u. (equivalent to the Jahn-Teller stabilization energy) compared with the distorted low-symmetry structure (SG Cmce model). We also present diffraction patterns for the two crystal symmetries to discuss the differences. Therefore, our results shed light on the existence of low-symmetry RP phases and make possible direct comparisons with future experiments.

Insights into Capacity Fading Mechanism and Coating Modification of High-Nickel Cathodes in Lithium-Ion Batteries

Developments in electric vehicles and mobile electronic devices are promoting the demand for lithium-ion batteries with higher capacity and longer lifetime. The performances of lithium-ion batteries are crucially affected by cathode materials, among which ternary cathode materials are the most competitive option with the advantages of high capacity, safety, and cost-effectiveness. However, although high-nickel ternary cathode materials can achieve relatively high specific capacity, they generally have unsatisfactory stability during long-term cycling. In this study, the microscopic mechanisms of the cathode failure and the principle of coating modification in lithium-ion batteries have been comprehensively examined. It has been revealed that the irreversible capacity fading is mainly attributed to the interface chemical reaction, which reduces the transition-metal valence states and generates undesired disordered rock-salt phases. This structural phase transformation at the interface induces the dissolution of transition metals and results in irreversible capacity loss of the cathode. To restrain the occurrence of this process, a LiNbO₃ coating-modified single-crystal LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) cathode material has been prepared. The electrochemical properties as well as the microstructural evolution of the cathode-electrolyte interface during cycling of both the uncoated and coated samples have been comprehensively characterized and compared through impedance spectroscopy testing, SEM-EDX, STEM, and EELS characterization. Additionally, molecular dynamics simulation results confirmed that LiNbO₃ coating can effectively inhibit the dissolution of transition metals while providing stable lithium-ion channels. The experimental results also indicate that the coating modification can effectively improve the cycling stability of the NCM811, with the capacity retention rate for 500 cycles increasing from 19% to 70%. This study is helpful to deepen the understanding of the capacity fading mechanisms, and the coating method is effective at maintaining the structural stability and improving the cycle life of lithium-ion batteries.

Stabilizing Layered Structure in Aqueous Electrolyte via O2-Type Oxygen Stacking

Despite the high energy density of O3-type layered cathode materials, the short cycle life in aqueous electrolyte hinders their practical applications in aqueous lithium-ion batteries (ALIBs). In this work, it is demonstrated that the structural stability of layered LiCoO₂ in aqueous electrolyte can be remarkably improved by altering the oxygen stacking from O3 to O2. As compared to the O3-type LiCoO₂ , the O2-type LiCoO₂ exhibits significantly improved cycle performance in neutral aqueous electrolyte. It is found that the structural degradation caused by electrophilic attack of proton can be effectively mitigated in O2-type layered structure. With O2 stacking, CoO₆ octahedra in LiCoO₂ possess stronger CoO bonds while Co migration from Co layer to Li layer is strongly hampered, resulting in enhanced structural stability against proton attack and prolonged cycle life in aqueous electrolyte. The findings in this work reveal that regulating oxygen stacking sequence is an effective strategy to improve the structural stability of layered materials for ALIBs.

Developments in Surface/Interface Engineering of Ni-Rich Layered Cathode Materials

Ni-rich layered cathodes with high energy densities reveal an enormous potential for lithium-ion batteries (LIBs), however, their poor stability and reliability have inhibited their application. To ensure their stability over extensive cycles at high voltage, surface/interface modifications are necessary to minimize the adverse reactions at the cathode-electrolyte interface (CEI), which is a critical factor impeding electrode performance. Therefore, this review provides a comprehensive discussion on the surface engineering of Ni-rich cathode materials for enhancing their lithium storage property. Based on the structural characteristics of the Ni-rich cathode, the major failure mechanisms of these structures during synthesis and operation are summarized. Then the existing surface modification techniques are discussed and compared. Recent breakthroughs in various surface coatings and modification strategies are categorized and their unique functionalities in structural protection and performance-enhancing are elaborated. Finally, the challenges and outlook on the Ni-rich cathode materials are also proposed.

Interfacial Strategies for Suppression of Mn Dissolution in Rechargeable Battery Cathode Materials

It is urgent to develop high-performance cathode materials for rechargeable batteries to address the globally growing concerns of energy shortage and environmental pollution. Among many candidate materials, Mn-based materials are promising and already used in some commercial batteries. Yet, their applicable future in reversible energy storage is severely plagued by the notorious Mn dissolution behaviors associated with structural instability during long-term cycling. As such, interfacial strategies aiming to protect Mn-based electrodes against Mn dissolution are being widely developed in recent years. A variety of interface-driven designs have been reported to function efficiently in suppressing Mn dissolution, necessitating a timely summary of recent advancements in the field. In this review, various interfaces, including the prebuilt interface and the electrochemically induced interface, to suppress Mn dissolution for Mn-based cathodes are discussed in terms of their fabrication details and functional outcomes. Perspectives for the future of interfacial strategies aiming at Mn dissolution suppression are also shared.

Gradient Hydrogen Migration Modulated with Self-Adapting S Vacancy in Copper-Doped ZnIn2S4 Nanosheet for Photocatalytic Hydrogen Evolution

It is a challenge to regulate charge flow synergistically at the atomic level to modulate gradient hydrogen migration (H migration) for boosting photocatalytic hydrogen evolution. Herein, a self-adapting S vacancy (Vs) induced with atomic Cu introduction into ZnIn₂S₄ nanosheets was fabricated elaborately, which can tune charge separation and construct a gradient channel for H migration. Detailed experimental results and theoretical simulations uncover the behavior mechanism of Vs generation with Cu introduction after substituting a Zn atom tendentiously. Cu-S bond shrinkage and Zn-S bond distortion are presented around Vs areas. Besides, Vs induced by Cu introduction lowers the internal electric field to restrain electron transmission between layers, which are enriched on the Vs area because of the lower surface electrostatic potential. Atomic Cu and Vs show a synergistic effect for regulating regional charge separation due to the Cu dopant being a hole trap and Vs being an electron trap. The channels for H migration with gradient ΔG_H⁰ are constructed by different S atom sites, which are modulated by Vs. Gradient H migration driven by a photothermal effect occurs on an identical surface without striding across a heterogeneous interface, which is a valid pathway with lower resistance for boosting H₂ release. Ultimately, 5 mol % Cu confined in ZnIn₂S₄ nanosheets achieves an optimum photocatalytic hydrogen evolution activity of 9.8647 mmol g^-1 h^-1, which is 14.8 times higher than 0.6640 mmol g^-1 h^-1 for ZnIn₂S₄, and apparent quantum efficiency reaches 37.11% at 420 nm. This work demonstrates the behavior mechanism of atomic substitution and provides cognition for hydrogen evolution mechanism deeply.