Nanoparticle-Catalyzed Green Chemistry Synthesis of Polybenzoxazole

Green Synthesis of Iron Nanoparticles Using an Aqueous Extract of Strawberry (Fragaria × ananassa Duchesne) Leaf Waste

In this study, we analysed the potential use of dried strawberry leaves and calyces for the production of nanoparticles using inorganic iron compounds. We used the following iron precursors FeCl3 × 6H2O, FeCl2 × 4H2O, Fe(NO3)3 × 9H2O, Fe2(SO4)3 × H2O, FeSO4 × 7H2O, FeCl3 anhydrous. It was discovered that the content of polyphenols and flavonoids in dried strawberries and their antioxidant activity in DPPH and FRAP were 346.81 µM TE/1 g and 331.71 µM TE/1 g, respectively, and were similar to these of green tea extracts. Microimages made using TEM techniques allowed for the isolation of a few nanoparticles with dimensions ranging from tens of nanometres to several micrometres. The value of the electrokinetic potential in all samples was negative and ranged from -21,300 mV to -11,183 mV. XRF analyses confirmed the presence of iron ranging from 0.13% to 0.92% in the samples with a concentration of 0.01 mol/dm3. FT-IR spectra analyses showed bands characteristic of nanoparticles. In calorimetric measurements, no increase in temperature was observed in any of the tests during exposure to the electromagnetic field. In summary, using the extract from dried strawberry leaves and calyxes as a reagent, we can obtain iron nanoparticles with sizes dependent on the concentration of the precursor.

Enabling Pd Catalytic Selectivity via Engineering Intermetallic Core@Shell Structure

Core@shell nanoparticles (NPs) have been widely explored to enhance catalysis due to the synergistic effects introduced by their nanoscale interface and surface structures. However, creating a catalytically functional core@shell structure is often a synthetic challenge due to the need to control the shell thickness. Here, we report a one-step synthetic approach to core-shell CuPd@Pd NPs with an intermetallic B2-CuPd core and a thin (∼0.6 nm) Pd shell. This core@shell structure shows enhanced activity toward selective hydrogenation of Ar-NO2 and allows one-pot tandem hydrogenation of Ar-NO2 to Ar-NH2 and its condensation with Ar-CHO to form Ar-N═CH-Ar. DFT calculations indicate that the B2-CuPd core promotes the Pd shell binding to Ar-NO2 more strongly than to Ar-CHO, thereby selectively activating Ar-NO2. The chemoselective catalysis demonstrated by B2-CuPd@Pd can be extended to a broader scope of substrates, allowing green chemistry synthesis of a wide range of functional chemicals and materials.

Metal-Ligand Interactions and Their Roles in Controlling Nanoparticle Formation and Functions

ConspectusFunctional nanoparticles (NPs) have been studied extensively in the past decades for their unique nanoscale properties and their promising applications in advanced nanosciences and nanotechnologies. One critical component of studying these NPs is to prepare monodisperse NPs so that their physical and chemical properties can be tuned and optimized. Solution phase reactions have provided the most reliable processes for fabricating such monodisperse NPs in which metal-ligand interactions play essential roles in the synthetic controls. These interactions are also key to stabilizing the preformed NPs for them to show the desired electronic, magnetic, photonic, and catalytic properties. In this Account, we summarize some representative organic bipolar ligands that have recently been explored to control NP formation and NP functions. These include aliphatic acids, alkylphosphonic acids, alkylamines, alkylphosphines, and alkylthiols. This ligand group covers metal-ligand interactions via covalent, coordination, and electrostatic bonds that are most commonly employed to control NP sizes, compositions, shapes, and properties. The metal-ligand bonding effects on NP nucleation rate and growth can now be more thoroughly investigated by in situ spectroscopic and theoretical studies. In general, to obtain the desired NP size and monodispersity requires rational control of the metal/ligand ratios, concentrations, and reaction temperatures in the synthetic solutions. In addition, for multicomponent NPs, the binding strength of ligands to various metal surfaces needs to be considered in order to prepare these NPs with predesigned compositions. The selective ligand binding onto certain facets of NPs is also key to anisotropic growth of NPs, as demonstrated in the synthesis of one-dimensional nanorods and nanowires. The effects of metal-ligand interactions on NP functions are discussed in two aspects, electrochemical catalysis for CO₂ reduction and electronic transport across NP assemblies. We first highlight recent advances in using surface ligands to promote the electrochemical reduction of CO₂. Several mechanisms are discussed, including the modification of the catalyst surface environment, electron transfer through the metal-organic interface, and stabilization of the CO₂ reduction intermediates, all of which facilitate selective CO₂ reduction. These strategies lead to better understanding of molecular level control of catalysis for further catalyst optimization. Metal-ligand interaction in magnetic NPs can also be used to control tunneling magnetoresistance properties across NPs in NP assemblies by tuning NP interparticle spacing and surface spin polarization. In all, metal-ligand interactions have yielded particularly promising directions for tuning CO₂ reduction selectivity and for optimizing nanoelectronics, and the concepts can certainly be extended to rationalize NP engineering at atomic/molecular precision for the fabrication of sensitive functional devices that will be critical for many nanotechnological applications.

Schiff base modified starch: A promising biosupport for palladium in Suzuki cross-coupling reactions

Starch can be used in diverse fields because it is a readily available, non-toxic polysaccharide with adaptable functionality and biodegradability. In this study, taking the aforementioned characteristics into consideration, we designed a modified starch (Starch-SB), which serves as supporting material for palladium stabilization. This new air and moisture-stable robust palladium composite [Starch-SB-Pd(II)] was characterized by FT-IR, XRD, TGA, XPS, SEM, EDX, TEM, CP/MAS ¹³C NMR, and ICP-MS analytical techniques. The catalytic studies exhibit high activity (up to 99 %) and stability in Suzuki cross-coupling reactions for this starch supported catalytic system under mild conditions (lower reaction temperature and green solvents) because of the cooperative interactions of multifunctional capturing sites on starch (Schiff base, hydroxy and amine groups) with palladium species. The experiments on reusability demonstrate that Starch-SB-Pd(II), which was prepared from functionalized starch, could be readily recycled several cycles through centrifugation. Moreover, we proposed a possibly multifunctional complex structure. This work presents an appealing and intriguing pathway for the utilization of polysaccharide as crucial support in green chemical transformations.

Reactivity and Recyclability of Ligand-Protected Metal Cluster Catalysts for CO2 Transformation

It remains a significant challenge to construct an integrated catalyst that combines advantages of homogeneous and heterogeneous catalysis with clarified mechanism and high performance. Here we show atomically precise CuAg cluster catalysts for CO₂ capture and utilization, where two functional units are combined into the clusters: metal and ligand. Due to atomic resolution on total and local structures of such catalysts to be achieved, which disentangles heterogeneous imprecise systems and permits tracing the reaction processes via experiments coupled with theory, site-specific catalysis induced by metal-ligand synergy can be accurately elucidated. The CuAg cluster catalysts exhibit excellent reactivity and recyclability to forge the C-N bonding from CO₂ formylation with secondary amines that can make the cluster catalysts more unique compared with typically homogeneous complexes.

Surface-enhanced Raman spectroscopy for detection of fentanyl and its analogs by using Ag-Au nanoparticles

The problem of opioid abuse has become a global problem. Thus, creating an urgent need for highly sensitive detection of opioid substances. In this work, we developed a method for the controllable preparation of Ag@Au nanocrystals (Ag@Au NCs) for highly sensitive SERS detection of fentanyl and its analogs. By regulating the concentration of ligands on the surface of silver seed, we successfully prepared Ag@Au NCs with three different morphologies, including core-satellite, yolk shell and hollow structure. Firstly, we explored the SERS-enhancing effect of Ag@Au NCs with different morphology using rhodamine 6G as the molecule to be tested. The results show that the core-satellite Ag@Au NCs has the best SERS effect, and the lowest detection concentration for R6G reached to 10^-10 M. Furthermore, we used the prepared core-satellite Ag@Au NCs to detect fentanyl and its five analogs, including carfentanyl, furanylfentanyl, thiofentanyl, 4-fluorobutyrfentanyl and N-4-piperidylacetanilide. Trace detection was achieved for the above six substances. For the environmental water samples spiked with fentanyl, the calculated recovery was 89.2% with an RSD value of 7.3%. Moreover, in order to realize the qualitative analysis of the characteristic peaks of different fentanyl analogs, we performed DFT calculations on the Raman spectra of the above-mentioned 6 substances. By analyzing the DFT calculation results, conventional Raman spectroscopy and SERS spectroscopy, we realized the distinction of six fentanyl analogs with similar structures.

Paving the Way to the Fuel of the Future-Nanostructured Complex Hydrides

Hydrides have emerged as strong candidates for energy storage applications and their study has attracted wide interest in both the academic and industry sectors. With clear advantages due to the solid-state storage of hydrogen, hydrides and in particular complex hydrides have the ability to tackle environmental pollution by offering the alternative of a clean energy source: hydrogen. However, several drawbacks have detracted this material from going mainstream, and some of these shortcomings have been addressed by nanostructuring/nanoconfinement strategies. With the enhancement of thermodynamic and/or kinetic behavior, nanosized complex hydrides (borohydrides and alanates) have recently conquered new estate in the hydrogen storage field. The current review aims to present the most recent results, many of which illustrate the feasibility of using complex hydrides for the generation of molecular hydrogen in conditions suitable for vehicular and stationary applications. Nanostructuring strategies, either in the pristine or nanoconfined state, coupled with a proper catalyst and the choice of host material can potentially yield a robust nanocomposite to reliably produce H2 in a reversible manner. The key element to tackle for current and future research efforts remains the reproducible means to store H2, which will build up towards a viable hydrogen economy goal. The most recent trends and future prospects will be presented herein.

Cu2O nanoparticle-catalyzed tandem reactions for the synthesis of robust polybenzoxazole

We report the synthesis of Cu₂O nanoparticles (NPs) by controlled oxidation of Cu NPs and the study of these NPs as a robust catalyst for ammonia borane dehydrogenation, nitroarene hydrogenation, and amine/aldehyde condensation into Schiff-base compounds. Upon investigation of the size-dependent catalysis for ammonia borane dehydrogenation and nitroarene hydrogenation using 8-18 nm Cu₂O NPs, we found 13 nm Cu₂O NPs to be especially active with quantitative conversion of nitro groups to amines. The 13 nm Cu₂O NPs also efficiently catalyze tandem reactions of ammonia borane, diisopropoxy-dinitrobenzene, and terephthalaldehyde, leading to a controlled polymerization and the facile synthesis of polybenzoxazole (PBO). The highly pure PBO (M_w = 19 kDa) shows much enhanced chemical stability than the commercial PBO against hydrolysis in boiling water or simulated seawater, demonstrating a great potential of using noble metal-free catalysts for green chemistry synthesis of PBO as a robust lightweight structural material for thermally and mechanically demanding applications.

Mesoporous Noble Metal-Metalloid/Nonmetal Alloy Nanomaterials: Designing Highly Efficient Catalysts

Mesoporous metals have received increasing attention in catalysis and related applications because of their novel physicochemical properties and functional geometric features. Control of multicomponent compositions and crystalline structures of mesoporous metals is critical for their applications. Recently, mesoporous metals have gradually expanded from traditional metal-metal alloys to metal-metalloid/nonmetal alloys with random solids and/or ordered intermetallics. As new, highly efficient nanocatalysts, mesoporous metal-metalloid/nonmetal alloys not only increase the utilization efficiency of precious noble metals and accelerate electron/mass transfer but also introduce new functions and optimize the surface electronic structure of metal sites, all of which enhance their catalytic activity and stability and tune their catalytic selectivity. In this Perspective, we focus on the latest developments in this area, including the findings from our group regarding the rational design and targeted synthesis of mesoporous noble metal-metalloid/nonmetal alloy nanocatalysts. We summarize the current synthetic strategies for mesoporous noble metal-metalloid/nonmetal alloys and discuss key effects of crystalline mesoporosity and metalloid/nonmetal alloys in enhancing catalytic performances of noble metal catalysts. We also describe the current bottlenecks and major challenges to explore further directions in synthesis and applications of mesoporous noble metal-metalloid/nonmetal alloys.

Recent advances in cyclization reactions of isatins or thioisatins via C–N or C–S bond cleavage

This review summarizes recent developments on cyclization reactions induced by the C–N or C–S bond cleavage of isatins or thioisatins in the last 5 years, which produce fused products instead of spiro compounds.