Rare-Earth Sulfide Nanocrystals from Wet Colloidal Synthesis: Tunable Compositions, Size-Dependent Light Absorption, and Sensitized Rare-Earth Luminescence

Ba15Zr14Te42: a new complex ternary telluride structure with low thermal conductivity

Heavier metal-based tellurides with complex structures are of great interest for thermoelectric (TE) applications. Herein, we report the synthesis of a new telluride Ba15Zr14Te42 using high-temperature reactions of elements. Our single-crystal X-ray diffraction study reveals that it crystallizes in the space group R3̄c of the trigonal crystal system and is isostructural to its Se analogue Ba15Zr14Se42 complex. The unit cell of the structure accommodates 426 atoms with cell dimensions of a = b = 13.2666(10) Å, c = 96.195(9) Å, and V = 14 662(3) Å3. This structure consists of 18 unique crystallographic atoms (3 × Ba, 8 × Zr, and 7 × Te). The bonding of Zr and Te atoms creates chains of ∞1[Zr14Te42]30-, which are separated by the Ba2+ cations. Although all the Zr atoms have a coordination number of 6, they form two types of coordination polyhedra by bonding with six Te atoms: slightly distorted octahedral and trigonal prisms of ZrTe6. We have synthesized polycrystalline Ba15Zr14Q42 (Q = Se/Te) samples, which were characterized by optical absorption studies to reveal direct bandgaps of <0.5 eV for the Te analogue and 1.3(1) eV for the Se analogue. The lattice thermal conductivity (klat) values of the samples are ultralow: ∼0.46 W mK-1 and ∼0.30 W mK-1 at 773 K for the Te and Se analogues, respectively. Temperature-dependent resistivity and thermopower studies were carried out for the Ba15Zr14Te42, which showed the p-type degenerate semiconducting nature of the sample at high temperatures. The theoretical DFT studies predict a bandgap of 0.14 eV for the Ba15Zr14Te42 phase.

Porous carboxymethyl cellulose nanocrystalline imprinted composite aerogels for selective adsorption of gadolinium

Gadolinium is widely applied in medical and high-tech materials because of special magnetic properties. Recovery of gadolinium from waste rare earth products has both economic and environmental value. In this experiment, honeycomb porous composite aerogels were constructed using sericin and sodium alginate mixed with functionally modified carboxymethylated cellulose nanocrystals for the adsorption and separation of gadolinium ions. There were large numbers of carboxyl groups as well as hydroxyl groups on the surface of sodium alginate and filamentous protein, which provided more sites for the adsorption of gadolinium ions. Besides, a stable honeycomb structure appeared on the surface of composite aerogels when the mixture of filamentous protein and sodium alginate was 1:1, which increased the specific surface area of materials to 140.65 m2 g-1. Additionally, the imprinted composite aerogels Ic-CNC/SSA were prepared by virtue of the imprinting technology, enhancing the adsorption selectivity of composite aerogels for gadolinium. The adsorption experiments revealed that the maximum adsorption capacity of Ic-CNC/SSA reached 93.41 mg g-1 at pH 7.0, indicating good selective adsorption of gadolinium ions. In summary, such composite aerogels provide great potential and reference value for the selective adsorption of gadolinium ions in industry.

Suppressed Concentration Quenching Brightens Short-Wave Infrared Emitters

The brightness of doped luminescent materials is usually limited by the ubiquitous concentration quenching phenomenon resulting in an intractable tradeoff between internal quantum efficiency and excitation efficiency. Here, an intrinsic suppression of concentration quenching in sensitized luminescent systems, by exploiting the competitive relationship between light emitters and quenchers in trapping excitation energies from sensitizers, is reported. Although Cr3+ sensitizers and trivalent lanthanide (Ln3+ , Ln = Yb, Nd, and Er) emitters themselves are highly susceptible to concentration quenching, the unprecedentedly high-brightness luminescence of Cr3+ -Ln3+ systems is demonstrated in the short-wave infrared (SWIR) range employing high concentrations of Cr3+ , whereby a record photoelectric efficiency of 23% is achieved for SWIR phosphor-converted light-emitting diodes, which is about twice as high as those previously reported. The results underscore the beneficial role of emitters in terminating excitation energies, opening up a new dimension for developing efficient sensitized luminescent materials.

Controlled Assembly of CdSe Nanoplatelet Thin Films and Nanowires

We assemble semiconductor CdSe nanoplatelets (NPs) at the air/liquid interface into 2D monolayers several micrometers wide, distinctly displaying nematic order. We show that this configuration is the most favorable energetically and that the edge-to-edge distance between neighboring NPs can be tuned by ligand exchange without disrupting film topology and nanoparticle orientation. We explore the rich assembly phase space by using depletion interactions to direct the formation of 1D nanowires from stacks of NPs. The improved control and understanding of the assembly of semiconductor NPs offers opportunities for the development of cheaper optoelectronic devices that rely on 1D or 2D charge delocalization throughout the assembled monolayers and nanowires.

A Universal Synthesis Strategy for Lanthanide Sulfide Nanocrystals with Efficient Photocatalytic Hydrogen Production

As an important lanthanide (Ln)-based functional materials, the Ln chalcogenides possess unique properties and various applications. However, the controllable synthesis of Ln chalcogenide nanocrystals still faces great challenges because of the rather poor affinity between Ln and chalcogenide ions (S, Se, Te) as well as strong preference of combination with existed oxygen. Herein, a facile but general heterogeneous nucleation synthetic strategy is established toward a series of colloidal ternary Cu Ln sulfides nanocrystals using the Ln dithiocarbamates and CuI as precursors. To extend this synthetic protocol, similar strategy is used to prepare six kinds of high quality CuLnS2 nanocrystals, while the bulk ones are only obtained by the traditional solid-state reaction at rigorous condition. Importantly, high-entropy nanocrystals CuLnS2 and CuEux Ln2-x S3 which contain six Ln elements (Nd, Sm, Gd, Tb, Dy) are readily obtained by the co-decomposed process attributed to their similar diffusion speed. As a proof-of-concept application, CuEu2 S3 nanocrystals showed efficient photocatalytic hydrogen production properties.

One-pot synthesis of nitrogen-doped carbonized polymer dots with tunable emission for multicolor light-emitting diodes

Carbonized polymer dots (CPDs) have highly potential application value in the field of optoelectronic devices due to their preferable stability, excellent optical properties and low cost. Here, the nitrogen-doped carbonized polymer dots (HNCDs) with self-quenching-resistant fluorescence were prepared via a simple solvothermal method with citric acid, urea and 2-hydroxyethyl methacrylate (HEMA) as raw materials. The structure and optical properties of the HNCDs have been explored in detail by various contrast experiments. The results show that HEMA form the poly(HEMA) to modify on the surface of carbonized core, which can overcome the quenching effect of carbonized core. The nitrogen doping is crucial for the red shift emission of solid-state HNCDs. Furthermore, the HNCDs exhibit concentration-dependent emission and excellent compatibility with silicone sol, which lead to their emission red shifted from blue to red with increasing concentration. The HNCDs were further applied to construct the light-emitting diodes (LEDs), and the multicolor LEDs ranging from blue to red can be prepared by simply varying the type of chips and adjusting the concentration of HNCDs in encapsulating material.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Nonvolatile modulation of luminescence in perovskite oxide thin films by ferroelectric gating

Nonvolatile and giant modulation of luminescence can be realized by the ferroelectric gating effect in a Ga³⁺/Pr³⁺ co-doped BaTiO₃ ultra-thin film epitaxially grown on a [Pb(Mg_1/3Nb_2/3)O₃]_0.7-[PbTiO₃]_0.3 single-crystallized substrate. The change behavior of the emission intensity matches that of the ferroelectric polarization hysteresis loop with a giant enhancement of over 13 times with negative polarization orientation. The interaction of O^2- at the O2p orbital in the valence band and Pr³⁺ with injected holes by the ferroelectric gating effect promotes the formation of excited state O^-, Pr⁴⁺, or Pr^3+q. This ferroelectric gating method can promote the development of controllable photo-, electroluminescent, and other optoelectronic devices for display, sensing, communication, and so on.

Sub-5 nm Anisotropic Pattern Transfer via Colloidal Lithography of a Self-Assembled GdF3 Nanocrystal Monolayer

Patterning materials with nanoscale features opens many research opportunities ranging from fundamental science to technological applications. However, current nanofabrication methods are ill-suited for sub-5 nm patterning and pattern transfer. We demonstrate the use of colloidal lithography to transfer an anisotropic pattern of discrete features into substrates with a critical dimension below 5 nm. The assembly of monodisperse, anisotropic nanocrystals (NCs) with a rhombic-plate morphology spaced by dendrimer ligands results in a well-ordered monolayer that serves as a 2D anisotropic hard mask pattern. This pattern is transferred into the underlying substrate using dry etching followed by removal of the NC mask. We exemplify this approach by fabricating an array of pillars with a rhombic cross-section and edge-to-edge spacing of 4.4 ± 1.1 nm. The fabrication approach enables broader access to patterning materials at the deep nanoscale by implementing innovative processes into well-established fabrication methods while minimizing process complexity.

Anisotropic growth of ZnO nanoparticles driven by the structure of amine surfactants: the role of surface dynamics in nanocrystal growth

Herein, we elucidate the key role of amine surfactants in the controlled anisotropic growth of ZnO nanoparticles that is achieved under mild conditions by organometallic hydrolysis. The structuring influence of alkyl substituents on the nitrogen atom of amines is jointly analyzed theoretically by DFT modeling, and experimentally by multinuclear NMR (1H, 13C and 17O) spectroscopy. We demonstrate that in initial steps leading to the growth of colloidal ZnO particles, the nature of molecular species that are involved in the solution strongly depends on the structure of the amine surfactant. By using tertiary, secondary or primary amines, no or weak adducts between the amine and zinc, or stable adducts, or adduct oligomers were identified, respectively. Afterwards, following the course of the reaction, the dynamic behavior of the amines on the grown ZnO nanocrystal surfaces is also strongly correlated with their structure. We identified that in the presence of tertiary, secondary or primary amines, no significant [Zn⋯N] adsorption, or surface adsorption with notable surface mobility, or a very strong adsorption is achieved, respectively. The last case, primary amines, significantly involves the structuring of a hydrogen bonding network. Therefore, such surface dynamic behavior has a predominant role in driving the nanocrystal growth, and orienting the ZnO material final morphology. By forming hydrogen bonds at the nanoparticle surface during the growth process, primary amines specifically lead to the formation of nanorods. Conversely, isotropic nanoparticles and aggregates are obtained when secondary and tertiary amines are used, respectively. These findings shed light on the role of weak surface interactions, herein H-bonding, that rule the growth of nano-objects and are as such crucial to identify, study, and control for achieving progress in nanoscience.

Synthesis of Mixed-Valent Lanthanide Sulfide Nanoparticles

In targeting reduced valent lanthanide chalcogenides, we report the first nanoparticle synthesis of the mixed-valent ferromagnets Eu₃ S₄ and EuSm₂ S₄ . Using divalent lanthanide halides with bis(trimethylsilyl)sulfide and oleylamine, we prepared nanoparticles of EuS, Eu₃ S₄ , EuSm₂ S₄ , SmS_1.9 , and Sm₃ S₄ . All nanoparticle phases were identified using powder X-ray diffraction, transmission electron microscopy was used to confirm morphology and nanoparticle size, and magnetic susceptibility measurements for determining the ordering temperatures and valence. The UV/Vis, Raman and X-ray photoelectron spectroscopies for each phase were compared. Surprisingly, the phase is influenced by the halide and the reaction temperature, where EuCl₂ formed EuS while EuI₂ formed Eu₃ S₄ , highlighting the role of kinetics in phase stabilization. Interestingly, at lower temperatures EuI₂ initially forms EuS, and converts over time to Eu₃ S₄ .

Facile Synthesis of Water-Stable Multicolor Carbonized Polymer Dots from a Single Unconjugated Glucose for Engineering White Light-Emitting Diodes with a High Color Rendering Index

Tunable emission carbonized polymer dots (CPDs) are highly desirable for the preparation of optoelectronic devices, especially white light-emitting diodes (WLEDs). In most available studies, polychromatic CPDs are synthesized using aromatic molecules as precursors. However, few studies report the successful synthesis of polychromatic CPDs using two or more unconjugated precursors. In this work, we prepare multicolor fluorescent CPDs from a single unconjugated precursor, glucose, via a hydrothermal reaction. By controlling the particle size and degree of graphitization of the synthesized CPDs, their emission wavelength can be tuned in the range 440-625 nm (i.e., almost the entire visible region). Furthermore, the CPDs can be used to construct LEDs of varying colors, including WLEDs (CIE coordinates: 0.34, 0.36) with the correlated color temperature and color rendering index of 4997 K and 92.69, respectively. In brief, the strategy proposed in this study successfully converts unconjugated glucose into high-performance LEDs with great application potential.