Realization of Distinct Mechano- and Piezochromic Behaviors via Alkoxy Chain Length-Modulated Phosphorescent Properties and Multidimensional Self-Assembly Structures of Dinuclear Platinum(II) Complexes

A visible-light regulated luminescent switch based on a spiropyran-derived Pt(II) complex for advanced anti-counterfeiting materials

A dual optical switch regulated by visible light has been developed through an integrated strategy, including luminescent Pt(II) and photochromic spiropyran (SP) as a triplet-sensitizer and photo-regulator building block, respectively. An efficient Förster resonance energy transfer (FRET) process is achieved, along with apparent and emissive color changes under visible light irradiation and temperature stimuli, which was utilized to develop advanced anti-counterfeiting materials.

Vibration-Dependent Dual-Phosphorescent Cu4 Nanocluster with Remarkable Piezochromic Behavior

The dual emission (DE) characteristics of atomically precise copper nanoclusters (Cu NCs) are of significant theoretical and practical interest. Despite this, the underlying mechanism driving DE in Cu NCs remains elusive, primarily due to the complexities of excited state processes. Herein, a novel [Cu4(PPh3)4(C≡C-p-NH2C6H4)3]PF6 (Cu4) NC, shielded by alkynyl and exhibiting DE, was synthesized. Hydrostatic pressure was applied to Cu4, for the first time, to investigate the mechanism of DE. With increasing pressure, the higher-energy emission peak of Cu4 gradually disappeared, leaving the lower-energy emission peak as the dominant emission. Additionally, the Cu4 crystal exhibited notable piezochromism transitioning from cyan to orange. Angle-dispersive synchrotron X-ray diffraction results revealed that the reduced inter-cluster distances under pressure brought the peripheral ligands closer, leading to the formation of new C-H⋅⋅⋅N and N-H⋅⋅⋅N hydrogen bonds in Cu4. It is proposed that these strengthened hydrogen bond interactions limit the ligands' vibration, resulting in the vanishing of the higher-energy peak. In situ high-pressure Raman and vibrationally resolved emission spectra demonstrated that the benzene ring C=C stretching vibration is the structural source of the DE in Cu4.

Responsive Organic Fluorescent Aggregates Based on Ion-π Interactions Away from Fluorescent Conjugated Groups

Responsive organic luminescent aggregates have a wide range of application fields, but currently there is still a lack of reasonable molecular design strategies. Introducing ion-π interactions into molecules can effectively alter their luminescent properties. However, current research typically focuses on ion localization at luminescent conjugated groups with the strong interaction forces. In this work, we introduce the flexible alkoxy chain spacers between fluorescent conjugated groups and ion-π interaction sites, and then adjust the fluorescence performance of the molecule by changing the strength of ion-π interactions. Bromine ion-based molecules with strong ion-π interactions exhibit high and stable fluorescence quantum yields in crystals and amorphous powders under the external stimuli. Hexafluorophosphate ion-based molecules with weak ion-π interactions have the high fluorescence quantum yield in crystals and very low fluorescence quantum yield in amorphous powders, showing variable fluorescence intensities under external stimuli. This demonstrates a new class of responsive organic luminescent solid-state materials.

Precise Regulation the Multiemission Based on Soft Double Salt for Information Encryption

Manipulation of multiemissive luminophores is meaningful for exploring luminescent materials. Herein, we report a soft double salt assembly strategy that could result in well-organized nanostructures and different luminescence based on multiple weak intermolecular interactions thanks to the existence of electrostatic attraction between the anionic and cationic platinum(II) complexes. The cationic complexes B1 and B2 can coassemble with anionic complex A, respectively, and the emission switches from monomeric and excimeric emission to the triplet metal-metal-to-ligand charge transfer (3MMLCT) along with morphology changes from 0-dimensional (0-D) nanospheres to 3-dimensional (3-D) nanostructures. It is demonstrated that an isodesmic growth mechanism is adopted during the spontaneous self-assembly process, and the relative negative ΔG values make the anionic and cationic complex molecules prefer to form aggregates based on π-π stacking, Pt···Pt interactions, and electrostatic interactions. The coassembly strategy between anionic and cationic complexes endows them with multicolor luminescent and apparent color as optical materials for advanced information encryption.

Mechanoresponsive luminescence triggered by phase transition of a supercooled copper(I) complex

Under mechanical stimulation, a copper(I) complex in its supercooled liquid state transforms into a crystalline phase, showing a dramatic emission color change from red to green that is accompanied by a 20-fold increase in the photoluminescence quantum yield up to 87%. This reversible phase transition relies on the intriguing ability of this copper complex to form a supercooled metastable state.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Cyanido-bridged diplatinum(ii) complexes: ligand and solvent effect on aggregation and luminescence

The association of platinum(ii)-based luminophores, which is caused by metal⋯metal and π-π stacking interactions, has been actively exploited in supramolecular construction of photofunctional molecular materials. Herein, we describe a series of bimetallic complexes [{Pt(C^N^/*N)}2(CN)][BAr4F], containing cyanido-bridged cyclometalated Pt(ii) chromophore fragments (HC^N^N = 6-phenyl-2,2'-bipyridine, (benzyltriazolyl)-phenylpyridine, and pyrazolyl-phenylpyridine; HC^N*N = N-pentyl-6-phenyl-N-(pyridin-2-yl)pyridin-2-amine; ^/* denote five/six-membered metallocycles). These compounds are intensely phosphorescent at room temperature showing quantum yields up to 0.73 in solution and 0.62 in the solid state, which are generally higher than those of the mononuclear relatives [Pt(C^N^/*N)(CN)]. The complex cations bearing sterically unhindered -C^N^N ligands readily assemble in solution, reaching the tetrameric species [{Pt(C^N^N)}2(CN)]44+ as suggested by diffusion NMR spectroscopy. The size of the aggregates can be regulated by the concentration, temperature, and polarity of the solvent that allows to alter the emission from green to near-IR. In the solid state, the maximum of low-energy luminescence is shifted up to 912 nm. The results show that photophysical properties of discrete complexes and the intermolecular aggregation can be substantially enhanced by utilizing the rigid bimetallic units giving rise to novel dynamic light emitting Pt(ii) systems.

Self-Assembly of Erlotinib-Platinum(II) Complexes for Epidermal Growth Factor Receptor-Targeted Photodynamic Therapy

Due to cell mutation and self-adaptation, the application of clinical drugs with early epidermal growth factor receptor (EGFR)-targeted inhibitors is severely limited. To overcome this limitation, herein, the synthesis and in-depth biological evaluation of an erlotinib-platinum(II) complex as an EGFR-targeted anticancer agent is reported. The metal complex is able to self-assemble inside an aqueous solution and readily form nanostructures with strong photophysical properties. While being poorly toxic toward healthy cells and upon treatment in the dark, the compound was able to induce a cytotoxic effect in the very low micromolar range upon irradiation against EGFR overexpressing (drug resistant) human lung cancer cells as well as multicellular tumor spheroids. Mechanistic insights revealed that the compound was able to selectively degrade the EGFR using the lysosomal degradation pathway upon generation of singlet oxygen at the EGFR. We are confident that this work will open new avenues for the treatment of EGFR-overexpressing tumors.

Phenylbenzothiazole-Based Platinum(II) and Diplatinum(II) and (III) Complexes with Pyrazolate Groups: Optical Properties and Photocatalysis

Based on 2-phenylbenzothiazole (pbt) and 2-(4-dimethylaminophenyl)benzothiazole (Me2N-pbt), mononuclear [Pt(pbt)(R'2-pzH)2]PF6 (R'2-pzH = pzH 1a, 3,5-Me2pzH 1b, 3,5-iPr2pzH 1c) and diplatinum (PtII-PtII) [Pt(pbt)(μ-R'2pz)]2 (R'2-pz = pz 2a, 3,5-Me2pz 2b, 3,5-iPr2pz 2c) and [Pt(Me2N-pbt)(μ-pz)]2 (3a) complexes have been prepared. In the presence of sunlight, 2a and 3a evolve, in CHCl3 solution, to form the PtIII-PtIII complexes [Pt(R-pbt)(μ-pz)Cl]2 (R = H 4a, NMe2 5a). Experimental and computational studies reveal the negligible influence of the pyrazole or pyrazolate ligands on the optical properties of 1a-c and 2a,b, which exhibit a typical 3IL/3MLCT emission, whereas in 2c the emission has some 3MMLCT contribution. 3a displays unusual dual, fluorescence (1ILCT or 1MLCT/1LC), and phosphorescence (3ILCT) emissions depending on the excitation wavelength. The phosphorescence is lost in aerated solutions due to sensitization of 3O2 and formation of 1O2, whose determined quantum yield is also wavelength dependent. The phosphorescence can be reversibly photoinduced (365 nm, ∼ 15 min) in oxygenated THF and DMSO solutions. In 4a and 5a, the lowest electronic transitions (S1-S3) have mixed characters (LMMCT/LXCT/L'XCT 4a and LMMCT/LXCT/ILCT 5a) and they are weakly emissive in rigid media. The 1O2 generation property of complex 3a is successfully used for the photooxidation of p-bromothioanisol showing its potential application toward photocatalysis.

Mechanofluorochromic Properties of 1,4-Diphenylanthracene Derivatives with Hypsochromic Shift

Several types of 1,4-diphenylanthracene derivatives 1-4 were prepared, and their photophysical properties were observed in the solid and solution states. Interestingly, the CN-group-substituted 1,4-diphenylanthracene derivative 2 was found to exhibit a higher fluorescence quantum yield (ϕf = 0.71) in the solid state than in the solution state, probably due to the formation of an intermolecular Ar-CN⋯H-Ar hydrogen bond and antiparallel type locked packing structure in the solid state. Furthermore, for some derivatives, an increase in the fluorescence quantum yield was observed in the PMMA film (1 wt%) over both the solid state and the solution state. More interestingly, some of the 1,4-diphenylanthracene derivatives exhibited unusual mechanofluorochromic properties with a "hypsochromic shift" in luminous color depending on the substituents of the phenyl group, and with the derivatives having CF3, OMe, CN, and two F substituents (1d-1f, 2-4) showing a significant luminous color change with a "hypsochromic shift" after grinding. However, no change in the luminous color was observed for the derivatives having H, Me, and one F substituent (1a-1c), and especially for some of the CN-substituted derivatives, a reversible luminous color change with a "hypsochromic shift" was observed, probably due to the formation of an antiparallel type packing structure. These "hypsochromic" anthracene derivatives could probably be utilized as new mechanofluorochromic materials.

Dibenzannulated peri-acenoacenes from anthanthrene derivatives

A series of dibenzannulated phenyl-annulated [4,2]peri-acenoacenes have been synthesized in three straightforward steps from 4,10-dibromoanthanthrone (vat orange 3). The phenyl bisannulation of [4,2]peri-acenoacene provides extra stability by increasing the overall aromatic character of the molecules, and allows for a 45-80% increase of the molar extinction coefficient (ε) compared to their [5,2]peri-acenoacene isomers. Depending on the substituents attached to the π-conjugated core, some derivatives exhibit strong aggregation in the solid state with association constant (Ka) up to 255 M-1, resulting in a significant broadening of the absorption spectrum and a substantial decrease of the bandgap value (more than 0.3 V) from solution to the solid state. One [4,2]peri-acenoacene derivative was doubly reduced using cesium and the crystal structure of the resulting salt has been obtained. Field-effect transistors showing a temperature-dependent hole mobility have been tested.

Near-Infrared Piezochromism from an o-Carborane Dyad: Boron Clusters Facilitating a Wide-Range Redshift and High Sensitivity

Piezochromic materials, which exhibit a fluorescence response with large emission spectral shifts and high sensitivity, may be useful in important applications, but there have been few reports of such organic luminophores. Herein, we report a new high-sensitivity piezochromic material based on the incorporation of an o-carborane unit, which exhibits aggregation-induced emission properties. In a high-pressure experiment, compared to carborane-free MTY, which exhibits an emission spectral shift of 75 nm and a sensitivity of 19.1 nm ⋅ GPa^-1 , the o-carborane dyad MTCb shows a larger emission wavelength difference of 131 nm and a higher sensitivity of 32.8 nm ⋅ GPa^-1 , demonstrating a performance that ranks among the best of organic piezochromic materials reported thus far. MTCb molecules adopt a J-aggregated pattern and have relatively loose molecular packing in the crystalline state. Interestingly, nonconjugated spherical carborane can disrupt the π-π interactions between adjacent molecules during compression, which results in excellent piezochromic performance.

Pressure-induced room-temperature phosphorescence enhancement based on purely organic molecules with a folded geometry

The pressure-dependent luminescence behavior of purely organic compounds is an important topic in the field of stimulus-responsive smart materials. However, the relevant studies are mainly limited to the investigation of fluorescence properties, while room-temperature phosphorescence (RTP) of purely organic compounds has not been investigated. Here, we filled in this gap regarding pressure-dependent RTP by using a model molecule selenanthrene (SeAN) with a folded geometry. For the first time to the best of our knowledge, a unique phenomenon involving pressure-induced RTP enhancement was discovered in an SeAN crystal, and an underlying mechanism involving folding-induced spin-orbit coupling enhancement was revealed. Pressure-induced RTP enhancement was also observed in an analog of SeAN also showing a folded geometry, but in this case yielded a white-light emission that is very rare in purely organic RTP-displaying materials.

Carborane-thiol protected copper nanoclusters: stimuli-responsive materials with tunable phosphorescence

Atomically precise nanomaterials with tunable solid-state luminescence attract global interest. In this work, we present a new class of thermally stable isostructural tetranuclear copper nanoclusters (NCs), shortly Cu4@oCBT, Cu4@mCBT and Cu4@ICBT, protected by nearly isomeric carborane thiols: ortho-carborane-9-thiol, meta-carborane-9-thiol and ortho-carborane 12-iodo 9-thiol, respectively. They have a square planar Cu4 core and a butterfly-shaped Cu4S4 staple, which is appended with four respective carboranes. For Cu4@ICBT, strain generated by the bulky iodine substituents on the carboranes makes the Cu4S4 staple flatter in comparison to other clusters. High-resolution electrospray ionization mass spectrometry (HR ESI-MS) and collision energy-dependent fragmentation, along with other spectroscopic and microscopic studies, confirm their molecular structure. Although none of these clusters show any visible luminescence in solution, bright μs-long phosphorescence is observed in their crystalline forms. The Cu4@oCBT and Cu4@mCBT NCs are green emitting with quantum yields (Φ) of 81 and 59%, respectively, whereas Cu4@ICBT is orange emitting with a Φ of 18%. Density functional theory (DFT) calculations reveal the nature of their respective electronic transitions. The green luminescence of Cu4@oCBT and Cu4@mCBT clusters gets shifted to yellow after mechanical grinding, but it is regenerated after exposure to solvent vapour, whereas the orange emission of Cu4@ICBT is not affected by mechanical grinding. Structurally flattened Cu4@ICBT didn't show mechanoresponsive luminescence in contrast to other clusters, having bent Cu4S4 structures. Cu4@oCBT and Cu4@mCBT are thermally stable up to 400 °C. Cu4@oCBT retained green emission even upon heating to 200 °C under ambient conditions, while Cu4@mCBT changed from green to yellow in the same window. This is the first report on structurally flexible carborane thiol appended Cu4 NCs having stimuli-responsive tunable solid-state phosphorescence.

Polymorphism and Mechanochromism in 2-Phenylbenzothiazole Cyclometalated PtII Complexes with Chelating N∧O Ligands

New cyclometalated Pt^II complexes with 2-phenylbenzothiazole (pbt) and two different picolinate ligands [Pt(pbt)(R-pic-κN,O)] (R = H (1), OH (2)) were prepared. In contrast to 1, the OH substituent group on 2 allows modulation of the packing in the solid state through donor-acceptor H-bonding interactions with the CH₂Cl₂ solvent. Thus, three pseudopolymorphs of 2 with different aggregation degrees were isolated, including yellow 2-Y, orange-red 2-R (2·0.5CH₂Cl₂) and black 2-B (2·0.75CH₂Cl₂) with emissions at 540, 656, and 740 nm, respectively, in the solid state at 298 K. 2-R and 2-B can be transformed to the pristine solid 2. Studies of their crystal structures show that 1 and 2-Y stack in columns with only π···π stacking interactions, whereas 2-R displays strong aggregated 1D infinite chains based on Pt···Pt and π···π stacking interactions, consistent with the colors and the photophysical properties, measured in several media. Interestingly, 1 and 2 exhibit reversible mechanochromic behavior with high contrast in the color and color emission upon mechanical grinding due to a phase transition between a crystalline and an amorphous state, as confirmed by powder X-ray diffraction (PXRD) studies. Theoretical calculations indicate that Pt···Pt contacts are more relevant in the trimers and tetramers than in the dimers, particularly in their T₁ states, associated with a change from a ³IL/³MLCT transition in the monomer to ³MM(L+L')CT in the oligomers. Noncovalent interaction (NCI) theoretical studies indicate that the π···π stacking among chelates also exerts a strong influence in the metal-metal-to-ligand charge transfer transition character.

Phosphorescent Bimetallic C^C* Platinum( ii ) Complexes with Bridging Substituted Diphenylformamidinates

A series of phosphorescent bimetallic platinum(II) complexes is presented, which were synthesized by the combination of bidentate cyclometalated N-heterocyclic carbene ligands and different bridging diphenylformamidinates. The complexes were characterized by standard techniques and additionally two solid-state structures could be obtained. Photoluminescence measurements revealed the strong emissive behavior of the compounds with quantum yields of up to 90 % and emission lifetimes of approx. 2 μs. The effect of the substitution pattern in the bridging ligands on the structural and photophysical properties of the complexes was examined in detail and rationalized by density functional theory calculations (PBE0/6-311G*).

Precise Synthesis of Concentric Ring, Helicoid, and Ladder Metallo-Polymers with Chevron-Shaped Monomers

Molecular geometry represents one of the most important structural features and governs physical properties and functions of materials. Nature creates a wide array of substances with distinct geometries but similar chemical composition with superior efficiency and precision. However, it remains a formidable challenge to construct abiological macromolecules with various geometries based on identical repeating units, owing to the lack of corresponding synthetic approaches for precisely manipulating the connectivity between monomers and feasible techniques for characterizing macromolecules at the single-molecule level. Herein, we design and synthesize a series of tetratopic monomers with chevron stripe shape which serve as the key precursors to produce four distinct types of metallo-macromolecules with well-defined geometries, viz., the concentric hexagon, helicoid polymer, ladder polymer, and cross-linked polymer, via platinum-acetylide couplings. Concentric hexagon, helicoid, and ladder metallo-polymers are directly visualized by transmission electron microscopy, atomic force microscopy, and ultra-high-vacuum low-temperature scanning tunneling microscopy at the single-molecule level. Finally, single-walled carbon nanotubes (SWCNTs) are selected as the guest to investigate the structure-property relationship based on such macromolecules, among which the helicoid metallo-polymer shows high efficiency in wrapping SWCNTs with geometry-dependent selectivity.

Multistimuli-Responsive Properties of Aggregated Isocyanide Cycloplatinated(II) Complexes

Here, we describe the neutral cyclometalated tert-butylisocyanide Pt^II complexes, [Pt(C^∧N)Cl(CNBu^t)] 1, the double salts [Pt(C^∧N)(CNBu^t)₂][Pt(C^∧N)Cl₂] 2, and the cationic complexes [Pt(C^∧N)(CNBu^t)₂]ClO₄ 3 [C∧N = difluorophenylpyridine (dfppy, a), 4-(2-pyridyl)benzaldehyde (ppy-CHO, b)]. A comparative study of the pseudopolymorphs 1a, 1a·CHCl₃, 1b, 1b·0.5Toluene, 1b·0.5PhF, and 3a·0.25CH₂Cl₂ reveals strong aggregation through Pt···Pt and/or π···π stacking interactions to give a variety of distinctive one-dimensional (1D) infinite chains, which modulate the photoluminescent properties. This intermolecular long-range aggregate formation is the main origin of the photoluminescent behavior of 1a and 1b complexes, which exhibit highly sensitive and reversible responses to multiple external stimuli including different volatile organic compounds (VOCs), solvents, temperatures, and pressures, with distinct color and phosphorescent color switching from green to red. Furthermore, complex 1b undergoes supramolecular self-assembly via Pt···Pt and/or π···π interactions into a polymer thin polystyrene (PS) film 10 wt % in response to toluene vapors, and 3a exhibits vapochromic and vapoluminescent behavior. Theoretical simulations on the dimer, trimer, and tetramer models of 1a and 1b have been carried out to get insight into the photophysical properties in the aggregated solid state.

Mechanofluorochromism of (D-π-)2A-type azine-based fluorescent dyes

Bathochromic or hypsochromic shift-type mechanofluorochromism (b-MFC or h-MFC) was found for (D–π–)₂A-type azine-based fluorescent dyes OUY-2, OUK-2, and OUJ-2 possessing intramolecular charge-transfer (ICT) characteristics from two (diphenylamino)carbazole–thiophene units as D (electron-donating group)–π (π-conjugated bridge) moieties to a pyridine, pyrazine, or triazine ring as A (electron-withdrawing group): grinding of the recrystallized dyes induced red or blue shifts of the fluorescent colors, that is, bathochromic or hypsochromic shifts of the fluorescence maximum wavelengths (λ^fl-solid_max). The degrees of MFC evaluated by the absolute value of differences (Δλ^fl-solid_max) in λ^fl-solid_max before and after grinding of the recrystallized dyes increased in the order of OUY-2 (+7 nm) < OUK-2 (−17 nm) < OUJ-2 (+45 nm), so that OUJ-2 exhibits obvious b-MFC, but OUK-2 exhibits h-MFC. X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC) demonstrated that the recrystallized dyes were in the crystalline state but the ground dyes were in the amorphous state. When the ground solids were heated above their crystallization temperatures (T_c), the colors and fluorescent colors recovered to the original ones before grinding or converted to other ones, that is, heating the ground solids in the amorphous state induced the recrystallization to recover the original microcrystals or to form other microcrystals due to polymorph transformation. However, (D–π–)₂Ph-type fluorescent dye OTK-2 having a phenyl group as a substitute for the azine rings exhibited non-obvious MFC. Molecular orbital (MO) calculations indicated that the values of the dipole moments (μ_g) in the ground state were 4.0 debye, 1.4 debye, 3.2 debye, and 2.9 debye for OTK-2, OUY-2, OUK-2, and OUJ-2, respectively. Consequently, on the basis of experimental results and MO calculations, we have demonstrated that the MFC of the (D–π–)₂A-type azine-based fluorescent dyes is attributed to reversible switching between the crystalline state of the recrystallized dyes and the amorphous state of the ground dyes with changes in the intermolecular dipole–dipole and π–π interactions before and after grinding. Moreover, this work reveals that (D–π–)₂A fluorescent dyes possessing dipole moments of ca. 3 debye as well as moderate or intense ICT characteristics make it possible to activate the MFC.

Bathochromic or hypsochromic shift-type mechanofluorochromism (b-MFC of h-MFC) was found for (D–π–)₂A-type azine-based fluorescent dyes: grinding of the recrystallized dyes induced bathochromic or hypsochromic shifts of the fluorescence bands.

Reversible On-Off Switching of Excitation-Wavelength-Dependent Emission of a Phosphorescent Soft Salt Based on Platinum(II) Complexes

Excitation-wavelength-dependent (Ex-De) emission materials show excellent potential in diverse advanced photonic areas. Of significant importance is the on-demand regulation of the Ex-De luminescence behavior of these materials, which is previously unprecedented. In this study, we report on a platinum(II) complex-based phosphorescent soft salt S1 ([Pt(tpp)(ed)]⁺[Pt(ftpp)(CN)₂]^- (where ttp = 2-(4-(trifluoromethyl)phenyl)pyridine, ed = ethane-1,2-diamine, and ftpp = 2-(4-fluoro-3-(trifluoromethyl)phenyl)pyridine)) with Ex-De photoluminescence (PL) property. UV-visible absorption and PL spectra of S1 were recorded in DMSO-H₂O mixture (1 × 10^-3 M) with various H₂O fractions to investigate its ground and excited states. Interestingly, the PL spectra of S1 powder show that its maximum emission peak is red-shifted from 595 to 644 nm upon excitation at different wavelengths from 360 to 520 nm, accompanied by an obvious emission color change from yellow-orange to red. Furthermore, confocal laser scanning fluorescence microscopy was employed to determine the PL property of self-assembled uniform S1 nanostructure, and the result shows that the Ex-De emission behavior is absent. On the basis of these results, we conclude the various Pt(II)···Pt(II) distances that exist are the major factor responsible for the properties of the Ex-De PL of S1 powder. Thus, for the first time, reversible on-off switching of Ex-De PL of S1 was achieved by manipulating its Pt(II)···Pt(II) distances through mechanical stress and vapor fuming. Finally, we demonstrate the high-level anticounterfeiting applications via on-demand multicolor displays.