Ladder Phenylenes Synthesized on Au(111) Surface via Selective [2+2] Cycloaddition

Revealing the Influence of Molecular Chemisorption Direction on the Reaction Selectivity of Dehalogenative Coupling on Au(111): Polymerization versus Cyclization

The control of reaction selectivity is of great interest in chemistry and depends crucially on the revelation of key influencing factors. Based on well-defined molecule-substrate model systems, various influencing factors have been elucidated, focusing primarily on the molecular precursors and the underlying substrates themselves, while interfacial properties have recently been shown to be essential as well. However, the influence of molecular chemisorption direction on reaction selectivity, as a subtle interplay between molecules and underlying substrates, remains elusive. In this work, by a combination of scanning tunneling microscopy imaging and density functional theory calculations, we report the influence of molecular chemisorption direction on the reaction selectivity of two types of dehalogenative coupling on Au(111), i.e., polymerization and cyclization, at the atomic level. The diffusion step of a reactive dehalogenated intermediate in two different chemisorption directions was theoretically revealed to be the key to determining the corresponding reaction selectivity. Our results highlight the important role of molecular chemisorption directions in regulating the on-surface dehalogenative coupling reaction pathways and products, which provides fundamental insights into the control of reaction selectivity by exploiting some subtle interfacial parameters in on-surface reactions for the fabrication of target low-dimensional carbon nanostructures.

Two-Dimensional Nonbenzenoid Heteroacene Crystals Synthesized via In-Situ Embedding of Ladder Bipyrazinylenes on Au(111)

Precisely introducing topological defects is an important strategy in nanographene crystal engineering because defects can tune π-electronic structures and control molecular assemblies. The synergistic control of the synthesis and assembly of nanographenes by embedding the topological defects to afford two-dimensional (2D) crystals on surfaces is still a great challenge. By in-situ embedding ladder bipyrazinylene (LBPy) into acene, the narrowest nanographene with zigzag edges, we have achieved the precise preparation of 2D nonbenzenoid heteroacene crystals on Au(111). Through intramolecular electrocyclization of o-diisocyanides and Au adatom-directed [2+2] cycloaddition, the nonbenzenoid heteroacene products are produced with high chemoselectivity, and lead to the molecular 2D assembly via LBPy-derived interlocking hydrogen bonds. Using bond-resolved scanning tunneling microscopy, we determined the atomic structures of the nonbenzenoid heteroacene product and diverse organometallic intermediates. The tunneling spectroscopy measurements revealed the electronic structure of the nonbenzenoid heteroacene, which is supported by density functional theory (DFT) calculations. The observed distinct organometallic intermediates during progression annealing combined with DFT calculations demonstrated that LBPy formation proceeds via electrocyclization of o-diisocyanides, trapping of heteroarynes by Au adatoms, and stepwise elimination of Au adatoms.

Single-Crystal One-Dimensional Porous Ladder Covalent Polymers

The synthesis of single-crystal, one-dimensional (1D) polymers is of great importance but a formidable challenge. Herein, we report the synthesis of single-crystal 1D ladder polymers in solution by dynamic covalent chemistry. The three-dimensional electron diffraction technique was used to rigorously solve the structure of the crystalline polymers, unveiling that each polymer chain is connected by double covalent bridges and all polymer chains are packed in a staggered and interlaced manner by π-π stacking and hydrogen bonding interactions, making the crystalline polymers highly robust in both thermal and chemical stability. The synthesized single-crystal polymers possess permanent micropores and can efficiently remove CO2 from the C2H2/CO2 mixture to obtain high-purity C2H2, validated by dynamic breakthrough experiments. This work demonstrates the first example of constructing single-crystal 1D porous ladder polymers with double covalent bridges in solution for efficient C2H2/CO2 separation.

Visualizing the Hierarchical Evolution of Aryl-Metal Bonding in Organometallic Nanostructures on Ag(111)

On-surface dehalogenative coupling reactions are promising for constructing nanostructures with diverse properties and functionalities. Extensive efforts have been devoted to single aryl-halogen (C-X) substituents and substitutions at various functionalization sites (typically including meta- and para-substitutions) to generate aryl-aryl single bonds. Moreover, multiple C-X substituents at the ortho-site and the peri- and bay-regions have been applied to create a variety of ring scaffolds. However, for multiple C-X substituents, the hierarchy of aryl-metal bond formation and dissociation remains elusive. Herein, by combining scanning tunneling microscopy imaging and density functional theory calculations, we have visualized and demonstrated the hierarchical evolution of aryl-metal bonding in organometallic intermediates involved in a dehalogenative coupling reaction on Ag(111), using a molecular precursor with both para-substitution and potential bay-region substitution. Our results elucidate how metal atoms are progressively embedded into and removed from organometallic intermediates, enhancing the understanding of on-surface dehalogenative coupling reactions for the controlled construction of the desired nanostructures.

On-Surface Synthesis of Graphene Nanoribbons with Atomically Precise Structural Heterogeneities and On-Site Characterizations

Graphene nanoribbons (GNRs) are strips of graphene, with widths of a few nanometers, that are promising candidates for future applications in nanodevices and quantum information processing due to their highly tunable structure-dependent electronic, spintronic, topological, and optical properties. Implantation of periodic structural heterogeneities, such as heteroatoms, nanopores, and non-hexagonal rings, has become a powerful manner for tailoring the designer properties of GNRs. The bottom-up synthesis approach, by combining on-surface chemical reactions based on rationally designed molecular precursors and in situ tip-based microscopic and spectroscopic techniques, promotes the construction of atomically precise GNRs with periodic structural modulations. However, there are still obstacles and challenges lying on the way toward the understanding of the intrinsic structure-property relations, such as the strong screening and Fermi level pinning effect of the normally used transition metal substrates and the lack of collective tip-based techniques that can cover multi-internal degrees of freedom of the GNRs. In this Perspective, we briefly review the recent progress in the on-surface synthesis of GNRs with diverse structural heterogeneities and highlight the structure-property relations as characterized by the noncontact atomic force microscopy and scanning tunneling microscopy/spectroscopy. We furthermore motivate to deliver the need for developing strategies to achieve quasi-freestanding GNRs and for exploiting multifunctional tip-based techniques to collectively probe the intrinsic properties.

Accurate Simulations of Scanning Tunneling Microscope: Both Tip and Substrate States Matter

Scanning tunneling microscope (STM) provides an atomic-scale characterization tool. To this end, high-resolution measurements and accurate simulations must closely cooperate. Emerging experimental techniques, e.g., substrate spacers and tip modifications, suppress metallic couplings and improve the resolution. On the other hand, development of STM simulation methods was inactive in the past decade. Conventional simulations focus on the electronic structure of the substrate, often overlooking detailed descriptions of the tip states. Meanwhile, the overwhelming usage of periodic boundary conditions ensures effective simulations of only neutral systems. In this Perspective, we highlight the recent progress that takes the effects of both tip and substrate into account under either Tersoff-Hamann or Bardeen's approximation, which provides an accurate analysis of measured high-resolution STM results, uncovers underlying concepts, and rationally designs experimental protocols for important chemical systems. We hope this Perspective will stimulate broad interest in advanced STM simulations, highlighting the way forward for STM investigations that involve complex geometrical and electronic structures.

On-Surface Synthesis of a Carbon Nanoribbon Composed of 4-5-6-8-Membered Rings

From the structure point of view, there are a number of ways of tiling a carbon sheet with different polygons, resulting in prospects of tailoring electronic structures of low-dimensional carbon nanomaterials. However, up to now, the experimental fabrication of such structures embedded with periodic nonhexagon carbon polygons, especially ones with more than three kinds, is still very challenging, leaving their potential properties unexplored. Here we report the bottom-up synthesis of a nanoribbon composed of 4-5-6-8-membered rings via lateral fusion of polyfluorene chains on Au(111). Scanning probe microscopy unequivocally determines both the geometric structure and the electronic properties of such a nanoribbon, revealing its semiconducting property with a bandgap of ∼1.4 eV on Au(111). We expect that this work could be helpful for designing and synthesizing complicated carbon nanoribbons.

Highly Selective On-Surface [2 + 2] Cycloaddition Induced by Hierarchical Metal-Organic Hybrids

On-surface synthesis of phenylenes is a promising strategy to form extended π-conjugated frameworks but normally lacks selectivity in achieving uniform products. Herein we demonstrate that the debromination reaction of 2,3-dibromophenazine (DBPZ) on Au(111) and Ag(111) surfaces can vary significantly considering the involvement of metal-organic hybrids (MOHs). On Au(111), [2 + 2] and [2 + 2 + 2] cycloadditions facilitate instantaneously upon the debromination occurring, while on Ag(111), several MOHs have been observed under sequential thermal annealing, leading to finally the uniform [2 + 2] cycloaddition product exclusively. By means of scanning tunneling microscopy (STM) and bond-resolved atomic force microscopy (BR-AFM), we have unambiguously depicted the chemical structure of related reaction intermediates and unraveled the undocumented role of hierarchical evolution of MOHs in steering the chemical selectivity.

A General Framework of Scanning Tunneling Microscopy Based on Bardeen's Approximation for Isolated Molecules

Scanning tunneling microscopy (STM) is one of the most popular techniques for precise characterization. Yet, its current theoretical implementation is often based on the periodic boundary condition with the Tersoff-Hamann approximation, which is inefficient to explore the tip states other than the s-wave and to treat properly the charged molecules that are ubiquitous in chemistry. In this work, we establish a general theoretical framework for STM image simulations, which is based on the Bardeen's approximation and utilizes the boundary condition of the cluster model. We develop an analytic algorithm for the precise evaluation of the transfer Hamiltonian matrix, addressing correctly the asymptotic behaviors of the tip states. Numerical results demonstrate that the molecular images under different STM tip states and mapping modes can be quantitatively simulated in the present framework, which paves the avenue for the conclusive investigation of the ground state electronic structures for either neutral or charged molecules.

Real-space visualization of sequential debromination of polybrominated benzenes on Ag(111)

By a combination of scanning tunneling microscopy imaging and density functional theory calculations, dehalogenation processes of symmetric polyhalogenated benzenes were explored on Ag(111), and a series of intermediate states were captured and visualized in real space. These results reveal a sequential dehalogenation scenario of symmetric polybrominated aromatics, which will broaden the understanding of on-surface dehalogenation reactions.

Synthesis of Dendronized Polymers on the Au(111) Surface

Dendronized polymers (DPs) consist of a linear polymeric backbone with dendritic side chains. Fine-tuning of the functional groups in the side chains enriches the structural versatility of the DPs and imparts a variety of novel physical properties. Herein, the first on-surface synthesis of DPs is achieved via the postfunctionalization of polymers on Au(111), in which the surface-confinement-induced planar conformation and chiral configurations were unambiguously characterized. While the dendronized monomer was synthesized in situ on Au(111), the subsequent polymerization afforded only short, cross-linked DP chains owing to multiple side reactions. The postfunctionalization approach selectively produced brominated polyphenylene backbone moieties by the deiodination polymerization of 4-bromo-4″-iodo-5'-(4-iodophenyl)-1,1':3',1″-terphenyl on Au(111), which smoothly underwent divergent cross-coupling reactions with two different isocyanides to form two types of DPs as individual long chains.

Spectral investigation on single molecular optoelectronics of ladder phenylenes

Atomic chains and organic conjugated molecules are of great important research value in molecular optoelectronics, due to their special optoelectronic properties. The fully conjugated nature of ladder phenylenes (LPs) provide some unique properties that have potential applications in the fabrication of molecular electronics devices. Our results reveal optoelectronic properties apply density function theory and non-equilibrium green's function theory, including unit-dependent light absorption, Raman scattering, phonon energy band structure, the chemical potential dependent density of states, electrical conductivity, I-V curve, transmission spectrum, etc. Our research provides theoretical guidance for the regulation of light-harvesting regions based on LPs structures, and theoretical support for the design of nano-scale optoelectronic devices.

High-Throughput Preparation of Supramolecular Nanostructures on Metal Surfaces

One of the contemporary challenges in materials science lies in the rapid materials screening and discovery. Experimental sample libraries can be generated by high-throughput parallel synthesis to map the composition space for rapid material discoveries. Molecular self-assembly on surfaces has proved a useful way to construct nanostructures with interesting topologies or properties. Despite the strong dependence of molecular stoichiometry on the structures, high-throughput preparations of supramolecular surface nanostructures have been far less explored. Here, by integrating a physical mask into the standard ultra-high-vacuum (UHV) molecular preparation system we show a high-throughput approach for preparing supramolecular nanostructures of continuous composition spreads on metal surfaces. The spatially addressable sample libraries of supramolecular self-assemblies are characterized by high-resolution scanning probe microscopy. We could explore different binary nanostructures of varying molecular ratios on one single substrate. Moreover, we use the minimum spanning tree approach to qualitatively and quantitatively study the structural properties of the formed nanostructures. This high-throughput approach may accelerate the screening and exploration of surface-supported, low-dimensional nanostructures not limited to supramolecular interactions.

Steering the Reaction Pathways of Terminal Alkynes by Introducing Oxygen Species: From C-C Coupling to C-H Activation

Selective regulation of chemical reactions is crucial in chemistry. Oxygen, as a key reagent in ubiquitous oxidative chemistry, exhibits great potential in regulating molecular assemblies, and more importantly, chemical reactions in molecular systems supported by metal surfaces. However, the unique catalytic performance and reaction mechanisms of oxygen species remain elusive, which are essential for understanding reaction selection and regulation. In this study, by a combination of scanning tunneling microscopy (STM) imaging/manipulations and density functional theory (DFT) calculations, we showed that the on-surface reaction pathways of terminal alkynes could be steered from C-C coupling to C-H activation with high selectivity by introducing O₂ into the molecular system. The catalytic performance and reaction mechanisms of oxygen species were explored in the C-H activation processes, and both molecular O₂ and atomic O could efficiently steer the reaction pathways. These results would provide a fundamental understanding of interfacial catalytic reaction processes.

Unveiling the Multiradical Character of the Biphenylene Network and Its Anisotropic Charge Transport

Recent progress in the on-surface synthesis and characterization of nanomaterials is facilitating the realization of new carbon allotropes, such as nanoporous graphenes, graphynes, and 2D π-conjugated polymers. One of the latest examples is the biphenylene network (BPN), which was recently fabricated on gold and characterized with atomic precision. This gapless 2D organic material presents uncommon metallic conduction, which could help develop innovative carbon-based electronics. Here, using first principles calculations and quantum transport simulations, we provide new insights into some fundamental properties of BPN, which are key for its further technological exploitation. We predict that BPN hosts an unprecedented spin-polarized multiradical ground state, which has important implications for the chemical reactivity of the 2D material under practical use conditions. The associated electronic band gap is highly sensitive to perturbations, as seen in finite temperature (300 K) molecular dynamics simulations, but the multiradical character remains stable. Furthermore, BPN is found to host in-plane anisotropic (spin-polarized) electrical transport, rooted in its intrinsic structural features, which suggests potential device functionality of interest for both nanoelectronics and spintronics.

Tandem Desulfurization/C-C Coupling Reaction of Tetrathienylbenzenes on Cu(111): Synthesis of Pentacene and an Exotic Ladder Polymer

Surface-confined reactions represent a powerful approach for the precise synthesis of low-dimensional organic materials. A complete understanding of the pathways of surface reactions would enable the rational synthesis of a wide range of molecules and polymers. Here, we report different reaction pathways of tetrathienylbenzene (T1TB) and its extended congener tetrakis(dithienyl)benzene (T2TB) on Cu(111), investigated using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. Both T1TB and T2TB undergo desulfurization when deposited on Cu(111) at room temperature. Deposition of T1TB at 453 K yields pentacene through desulfurization, hydrogen transfer, and a cascade of intramolecular cyclization. In contrast, for T2TB the intramolecular cyclization stops at anthracene and the following intermolecular C-C coupling produces a conjugated ladder polymer. We show that tandem desulfurization/C-C coupling provides a versatile approach for growing carbon-based nanostructures on metal surfaces.

[2+2] Cyclo-Addition Reactions for Efficient Polymerization on a HOPG Surface at Ambient Conditions

Polymers obtained by on-surface chemistry have emerged as a class of promising materials. Here, we propose a new strategy to obtain self-assembled 1D polymers by using photochemical [2+2] cyclo-addition or by using a mild thermal annealing. All nanostructures are fully characterized by using scanning tunneling microscopy at ambient conditions on a graphite surface. We demonstrated that nature of the stimulus strongly alters the overall quality of the resulting polymers in terms of length and number of defects. This new way is an efficient method to elaborate on-surface self-assembled 1D polymers.

On-Surface Synthesis of [3]Radialenes via [1+1+1] Cycloaddition

[3]Radialenes are the smallest carbocyclic structures with unusual topologies and cross-conjugated π-electronic structures. Here, we report a novel [1+1+1] cycloaddition reaction for the synthesis of aza[3]radialenes on the Ag(111) surface, where the steric hindrance of the chlorine substituents guides the selective and orientational assembling of the isocyanide precursors. By combining scanning tunneling microscopy, non-contact atomic force microscopy, and time-of-flight secondary ion mass spectrometry, we determined the atomic structure of the produced aza[3]radialenes. Furthermore, two reaction pathways including synergistic and stepwise are proposed based on density functional theory calculations, which reveal the role of the chlorine substituents in the activation of the isocyano groups via electrostatic interaction.

Nanoconfined synthesis of conjugated ladder polymers

This review highlights recent advances in controlled synthesis of conjugated ladder polymers using templates.

Chemisorption-Induced Formation of Biphenylene Dimer on Ag(111)

We report an example that demonstrates the clear interdependence between surface-supported reactions and molecular-adsorption configurations. Two biphenyl-based molecules with two and four bromine substituents, i.e., 2,2'-dibromobiphenyl (DBBP) and 2,2',6,6'-tetrabromo-1,1'-biphenyl (TBBP), show completely different reaction pathways on a Ag(111) surface, leading to the selective formation of dibenzo[e,l]pyrene and biphenylene dimer, respectively. By combining low-temperature scanning tunneling microscopy, synchrotron radiation photoemission spectroscopy, and density functional theory calculations, we unravel the underlying reaction mechanism. After debromination, a biradical biphenyl can be stabilized by surface Ag adatoms, while a four-radical biphenyl undergoes spontaneous intramolecular annulation due to its extreme instability on Ag(111). Such different chemisorption-induced precursor states between DBBP and TBBP consequently lead to different reaction pathways after further annealing. In addition, using bond-resolving scanning tunneling microscopy and scanning tunneling spectroscopy, we determine with atomic precision the bond-length alternation of the biphenylene dimer product, which contains 4-, 6-, and 8-membered rings. The 4-membered ring units turn out to be radialene structures.

Pseudo-atomic orbital behavior in graphene nanoribbons with four-membered rings

The incorporation of nonhexagonal rings into graphene nanoribbons (GNRs) is an effective strategy for engineering localized electronic states, bandgaps, and magnetic properties. Here, we demonstrate the successful synthesis of nanoribbons having four-membered ring (cyclobutadienoid) linkages by using an on-surface synthesis approach involving direct contact transfer of coronene-type precursors followed by thermally assisted [2 + 2] cycloaddition. The resulting coronene-cyclobutadienoid nanoribbons feature a narrow 600-meV bandgap and novel electronic frontier states that can be interpreted as linear chains of effective p_x and p_y pseudo-atomic orbitals. We show that these states give rise to exceptional physical properties, such as a rigid indirect energy gap. This provides a previously unexplored strategy for constructing narrow gap GNRs via modification of precursor molecules whose function is to modulate the coupling between adjacent four-membered ring states.