Steering Triplet-Triplet Annihilation Upconversion through Enantioselective Self-Assembly in a Supramolecular Gel

Chiral Rotaxane-Branched Dendrimers as Relays in Artificial Light-Harvesting Systems with Boosted Circularly Polarized Luminescence

Starting from AIEgen-functionalized chiral [2]rotaxane building block, we have successfully synthesized a new class of chiral rotaxane-branched dendrimers through controllable divergent strategy for the first time, based on which novel chiral artificial light-harvesting systems (LHSs) were successfully constructed in aqueous phase by sequentially introducing achiral donor and acceptor. More importantly, accompanied by the two-step Förster resonance energy transfer (FRET) process in the resultant artificial LHSs, the sequentially amplified circularly polarized luminescence (CPL) performances were achieved, highlighting that the chiral rotaxane-branched dendrimers could serve as excellent relay for both energy transfer and chirality transmission. Impressively, compared with the sole chiral rotaxane-branched dendrimers, the dissymmetry factors (glum) values of the resultant artificial LHSs were amplified by one order of magnitude up to 0.038, enabling their further applications in information storage and encryption. The proof-of concept study provides not only a feasible approach for the efficient amplification of CPL performances but also a novel platform for the construction of novel chiral luminescent materials.

NIR-II upconversion nanomaterials for biomedical applications

As a nonlinear optical phenomenon, upconversion (UC) occurs when two or more low-energy excitation photons are sequentially absorbed and emitted. Upconversion nanomaterials exhibit superior photostability, non-invasiveness, a unique near-infrared anti-Stokes shift, and enhanced tissue penetration capability. However, general upconversion nanomaterials typically utilize visible light (400-700 nm) for excitation, leading to limited tissue penetration, background signal interference, limited excitation efficiency and imaging quality issues due to tissue absorption and scattering. The increasing use of upconversion nanomaterials in the near-infrared one-region (NIR-I) window (700-900 nm) offers benefits such as enhanced penetration into biological tissues, relatively improved imaging resolution, and lower spontaneous luminescence, although these materials are still susceptible to background signals, limiting their effectiveness in high signal-to-noise ratio imaging. This distinctive wavelength conversion endows upconversion nanomaterials in the NIR-II region with extraordinary potential for diverse applications. Biomedical research has primarily focused on biomedical imaging for disease diagnosis and treatment, as well as biomarker detection. Nonetheless, studies specifically targeting the NIR-II window remain limited. This paper summarizes the latest research progress on upconversion nanomaterials in the NIR-II region. It begins by introducing the preparation methods for these materials in the NIR-II, followed by their applications in imaging and biological contexts. Lastly, it discusses the primary challenges and future prospects of upconversion materials in NIR-II, aiming to promote their development.

Circularly Polarized Lasing from Helical Superstructures of Chiral Organic Molecules

Chiral supramolecular aggregates have the potential to explore circularly polarized lasing with large dissymmetry factors. However, the controllable assembly of chiral superstructures towards deterministic circularly polarized laser emission remains elusive. Here, we design a pair of chiral organic molecules capable of stacking into a pair of definite helical superstructures in microcrystals, which enables circularly polarized lasing with deterministic chirality and high dissymmetry factors. The microcrystals function as optical cavities and gain media simultaneously for laser oscillations, while the supramolecular helices endow the laser emission with strong and opposite chirality. As a result, the microcrystals of two enantiomers allow for circularly polarized laser emission with opposite chirality and high dissymmetry factors up to ~1.0. This work demonstrates the chiral supramolecular assemblies as an excellent platform for high-performance circularly polarized lasers.

Multicolor and sign-invertible circularly polarized luminescence from nonchiral charge-transfer complexes assembled with N-terminal aromatic amino acids

Circularly polarized luminescence (CPL) materials with precisely controlled emission colors and handedness are highly desirable for their promising applications in advanced optical technologies, but it is rather challenging to obtain them primarily due to the lack of convenient, powerful, and universal preparation strategies. Herein, we report a simple yet versatile solution route for constructing multicolor CPL materials with controllable handedness from nonchiral luminescent charge-transfer (CT) complexes through co-assembly with chiral N-terminal aromatic amino acids. The resulting ternary co-assemblies exhibit obvious CPL signals from 489 to 601 nm, covering from blue via green and yellow to orange-red. Notably, the CPL sign can be readily inverted by changing the substituents at the α-position of amino acids or the molecular structure of achiral electron donors due to effects on the hydrogen bonds, CT interactions, and stacking patterns. This work provides a new insight into developing CPL materials with tunable color and inverted handedness.

Low blue-hazard white-light emission based on color-tunable triplet-triplet annihilation upconversion

The commonly used artificial light sources, such as fluorescent lamps and white light-emitting diodes, often have a high ratio of blue light emission, which poses potential blue light hazards, especially one of the main culprits leading to eye diseases. Therefore, developing novel white lighting sources with low blue-hazard is highly appreciated. In this work, an air-stable and color-tunable triplet-triplet annihilation upconversion (TTA-UC) mechanism was proposed to realize the low blue-hazard white-light emission. The proposed design was composed of three primary RGB colors from the annihilator (9,10-diphenylanthracene, DPA), the laser excitation source, and the photosensitizer (palladium (II) octaetylporphyrin, PdOEP), respectively. The introduction of oil-in-water (o/w) microemulsion can effectively block the potential oxygen-induced triplet-quenching and benefit high UC efficiency. Moreover, either raising ambient temperatures or adding isobutanol can activate the UC process to yield white-light emission. Notably, the white-light emission with a Commission Internationale de l'Eclairage (CIE) coordinate of (0.33, 0.33) as well as a low ratio of blue emission (14.2 %) was achieved at an ambient temperature of 42 °C. Therefore, the proposed air-stable TTA-UC mechanism can significantly lower the blue-hazard and provide a novel solution for applications in lighting and display.

Reversible Circularly Polarized Luminescence Inversion and Emission Color Switching in Photo-Modulated Supramolecular Polymer for Multi-Modal Information Encryption

Constructing circularly polarized luminescence (CPL) materials that exhibit dynamic handedness inversion and emissive color modulation for multimodal information encryption presents both a significant challenge and a compelling opportunity. Here, we have developed a pyridinethiazole acrylonitrile-cholesterol derivative (Z-PTC) that exhibits wavelength-dependent photoisomerization and photocyclization, enabling dynamic handedness inversion and emissive color modulation in supramolecular assemblies with decent CPL activity. Coordination with Ag+ ions form the Z-PTC Ag supramolecular polymer (SP1), which assembles into nanotubes displaying enhanced positive yellow-green CPL. Irradiation at 454 nm transforms SP1 into nanospheres of a mixture supramolecular polymer (SP2) of Z/E-PTC Ag, displaying inverted supramolecular chirality and emitting negative orange-yellow CPL. Reheating SP2 to 343 K restores the original nanotube structure via excellent reversible photoisomerization. Exposure to 365 nm light also induces CPL inversion from positive to negative and triggers morphological changes from SP1 to SP2. Prolonged irradiation causes further transformation into irregular supramolecular aggregate, shifting the emission color to blue and eliminating CPL. These dynamic properties of the multicolor CPL system, including reversible handedness inversion, can also be realized in the semisolid state, exhibiting promising potential for multimodal information encryption applications with enhanced security and complexity.

Molecular Imprinting Strategy Enables Circularly Polarized Luminescence Enhancement of Recyclable Chiral Polymer Films

Circularly polarized luminescence (CPL) plays a crucial role in the fields of optical display and information technology. The pursuit of high dissymmetry factors (glum) and fluorescence quantum yields in CPL materials remains challenging due to inherent trade-offs. In this work, molecular imprinting technology is employed to develop novel CPL-active polymer films based entirely on achiral fluorene-based polymers, achieving an enhanced glum value exceeding 4.2 × 10-2 alongside high quantum yields. These chiral molecularly imprinted polymer films (MIPF) are synthesized via a systematic three-step process: co-assembly with limonene and a porphyrin derivative (TBPP), interchain crosslinking, and subsequent removal of small molecules. During this process, limonene acts as the chiral inducer, while TBPP serves dual roles as both the chiral enhancer and imprinted molecule. The elimination of TBPP creates chiral sites for various fluorescent molecules, facilitating full-color CPL emission. The chiral MIPF exhibits stable CPL performance even after multiple cycles of post-assembly and removal. Furthermore, these films can function as interfacial microreactors, enabling in situ chemical reactions that dynamically regulate CPL signals. Additionally, chiral self-organization within achiral azobenzene polymer films can also be achieved using MIPF, serving as intense chiral light sources.

Pd(II) and Cu(III) Complexes of Multiply Fused Pentaphyrin Isomers with Tunable Structures and NIR Absorption

Fused porphyrinoids have received increasing interest in light of their extended conjugation and unique coordination behavior. On the basis of our previously reported multiply fused pentaphyrin isomers 1 and 2, a novel isomer 3 has been synthesized in this work. 3 possesses a hexacyclic fused moiety with a nearly coplanar CCNN cavity involving an inverted pyrrole, which is slightly different from the CNNN ones of 1 and 2 involving an N-confused pyrrole. 1-3 possess cavities with three depronatable protons and thus they all can generate Cu(III) complexes. However, only 3Cu is stable under ambient conditions. On the other hand, 3 remains intact upon treatment with Pd(II) ions, while 1 and 2 could undergo structural rearrangement to accommodate Pd(II), affording 1Pd and 2Pd accompanied by the formation of a lactone ring and the addition of a methoxy group, respectively. Compared with the free bases, the complexes show distinct aromaticity and more intense near-infrared (NIR) absorption up to ca. 1600, 1170, and 1500 nm, respectively. The results indicate that the subtle modification of the linking modes between the pyrrolic units in the fused pentaphyrinoids is effective in modulating the coordination behavior for synthesizing complexes with tunable aromaticity and NIR absorption.

Photon Upconversion Cooperates with Downshifting in Chiral Systems: Modulation, Amplification, and Applications of Circularly Polarized Luminescence

Circularly polarized luminescence (CPL)-active materials are increasingly recognized for their potential applications such as 3D imaging, data storage, and optoelectronic devices. Typically, CPL materials have required high-energy (HE) photons for excitation to emit low-energy (LE) circularly polarized light, a process known as downshifting CPL (DSCPL). However, the emergence of upconverted CPL (UCCPL), where the absorption of multi LE photons results in the emission of a single HE photon with circular polarization, has recently attracted considerable attention. This minireview highlights the intricate relationship between upconversion and CPL phenomena. During upconversion, the dissymmetry factor (glum) value can be improved in certain systems. Additionally, the integration of both LE and HE photons in upconversion-downshifting-synergistic systems offers avenues for dual-excitation or dual-emission CPL functionalities. More in detail, the emerging UCCPL based on various photon upconversion mechanisms and their synergy with DSCPL are introduced. Additionally, several examples that demonstrate the applications of UCCPL are presented to highlight the future opportunities.

Supramolecular Annihilator with DPA Parallelly Arranged by Multiple Hydrogen-Bonding Interactions for Enhanced Triplet-Triplet Annihilation Upconversion

The triplet annihilator is a critical component for triplet-triplet annihilation upconversion (TTA-UC); both the photophysical properties of the annihilator and the intermolecular orientation have pivotal effects on the overall efficiency of TTA-UC. Herein, we synthesized two supramolecular annihilators A-1 and A-2 by grafting 9,10-diphenylanthracene (DPA) fragments, which have been widely used as triplet annihilators for TTA-UC, on a macrocyclic host-pillar[5]arenes. In A-1, the orientation of the two DPA units was random, while, in A-2, the two DPA units were pushed to a parallel arrangement by intramolecular hydrogen-bonding interactions. The two compounds showed very similar photophysical properties and host-guest binding affinities toward electron-deficient guests, but showed totally different TTA-UC emissions. The UC quantum yield of A-2 could be optimized to 13.7% when an alkyl ammonia chain-attaching sensitizer S-2 was used, while, for A-1, only 5.1% was achieved. Destroying the hydrogen-bonding interactions by adding MeOH to A-2 significantly decreased the UC emissions, demonstrating that the parallel orientations of the two DPA units contributed greatly to the TTA-UC emissions. These results should be beneficial for annihilator designs and provide a new promising strategy for enhancing TTA-UC emissions.

General Strategy to Prepare Nondoped Circularly Polarized Luminescent Liquid Crystal Materials with Tunable Performance

Chiral luminescent liquid crystals have attracted widespread attention from researchers due to their unique advantages in constructing circularly polarized luminescent (CPL) materials with large luminescent asymmetry factor (glum) values. However, how to effectively prepare nondoped CPL chiral liquid crystals remains a challenge. In this article, we developed an effective and universal method to prepare nondoped CPL chiral liquid crystal materials. To achieve our strategy, we copolymerized chiral monomer M0Mt with α-cyanostilbene-based luminescent monomers MmPVPCN (m = 6, 8, 10) bearing different flexible spacer lengths to obtain a series of CPL chiral liquid crystal copolymers poly(MmPVPCN(x)-co-M0Mt(y)). Under the induction of the chiral component, the α-cyanostilbene component assembles to form chiral liquid crystals. Meanwhile, α-cyanostilbene also exhibits aggregation-induced emission enhancement characteristics. Therefore, with the help of the selective reflection effect of chiral liquid crystals, the copolymer films can emit efficient CPL. For poly(M8PVPCN(0.85)-co-M0Mt(0.15)), the glum and solid luminescence quantum yield can achieve -2.61 × 10-2 and 25.04%, respectively. In addition, by altering the chemical structure of the copolymers, the phase structure of the copolymers can be effectively controlled, thereby regulating their CPL properties.

Supramolecular gels - a panorama of low-molecular-weight gelators from ancient origins to next-generation technologies

Supramolecular gels, self-assembled from low-molecular-weight gelators (LMWGs), have a long history and a bright future. This review provides an overview of these materials, from their use in lubrication and personal care in the ancient world, through to next-generation technologies. In academic terms, colloid scientists in the 19th and early 20th centuries first understood such gels as being physically assembled as a result of weak interactions, combining a solid-like network having a degree of crystalline order with a highly mobile liquid-like phase. During the 20th century, industrial scientists began using these materials in new applications in the polymer, oil and food industries. The advent of supramolecular chemistry in the late 20th century, with its focus on non-covalent interactions and controlled self-assembly, saw the horizons for these materials shifted significantly beyond their historic rheological applications, expanding their potential. The ability to tune the LMWG chemical structure, manipulate hierarchical assembly, develop multi-component systems, and introduce new types of responsive and interactive behaviour, has been transformative. Furthermore, the dynamics of these materials are increasingly understood, creating metastable gels and transiently-fueled systems. New approaches to shaping and patterning gels are providing a unique opportunity for more sophisticated uses. These supramolecular advances are increasingly underpinning and informing next-generation applications - from drug delivery and regenerative medicine to environmental remediation and sustainable energy. In summary, this article presents a panorama over the field of supramolecular gels, emphasising how both academic and industrial scientists are building on the past, and engaging new fundamental insights and innovative concepts to open up exciting horizons for their future use.

Multicolor circularly polarized luminescence inversion of metal-organic supramolecular polymers

Metal-organic supramolecular polymers (MOSPs) with multicolor circularly polarized luminescence (CPL) and handedness inversion were constructed from the coordination-driven assembly of pyridine-cyanostilbene-cholesterol and metal salts by modulating the treatment modes, solvents, and metal ions.

Chalcogen and Pnictogen Bonding-Modulated Multiple-Constituent Chiral Self-Assemblies

Chalcogen and pnictogen-based σ-hole interactions have shown limited applications in controlling supramolecular chirality. In this work, we employed chalcogen and pnictogen bonding to control supramolecular chirality in a multiple-constituent system with modulate chiral optics. Phenyl phosphonium-selenium conjugates with electrophilic σ-hole regions were allowed to coassemble with the π-conjugated deprotonated amino acids. Control experimental and computational results evidenced that the chalcogen and pnictogen bonding formed with carboxylates induced morphological transformation from achiral membranes to chiral helical nanotubes with emerging supramolecular chirality. Also, the chiral helical architectures accomplished inverted handedness and chiroptical activities, including circular dichroism and circularly polarized luminescence. Finally, synergistic chalcogen and pnictogen bonding was employed to stabilize the charge-transfer complexation to afford ternary chiral co-assemblies with evolved chiral optics and luminescence. This work, showing the role of chalcogen and pnictogen bonding in manipulating supramolecular chirality and optics, will expand the toolbox in the fabrication and property-tuning of chiral materials containing elements of Group VA and VIA.

Porous Supramolecular Assembly of Pentiptycene-Containing Gold(I) Complexes: Persistent Excited-State Aurophilicity and Inclusion-Induced Emission Enhancement

We report herein a porous supramolecular framework formed by a linear mononuclear Au(I) complex (1) via the tongue-and-groove-like joinery between the pentiptycene U-cavities (grooves) and the rod-shaped π-conjugated backbone and alkyl chains (tongues) with the assistance of C-H···π and aurophilic interactions. The framework contains distorted tetrahedral Au₄ units, which undergo stepwise and persistent photoinduced Au(I)-Au(I) bond shortening (excited-state aurophilicity), leading to multicolored luminescence photochromism. The one-dimensional pore channels could accommodate different solvates and guests, and the guest inclusion-induced luminescence enhancement (up to 300%) and/or vapochromism are characterized. A correlation between the aurophilic bonding and the luminescence activity is uncovered by TDDFT calculations. Isostructural derivatives 2 and 3 corroborate both the robustness of the porous supramolecular assembly and the mechanisms of the stimulation-induced luminescence properties of 1. This work demonstrates the cooperation of aurophilicity and structural porosity and adaptability in achieving novel supramolecular photochemical properties.

ATP-Induced Emergent Circularly Polarized Luminescence and Encryption

Biomimetic ATP-driven supramolecular assembly is important to understand various biological processes and dissipative systems. Here, we report an ATP-driven chiral assembly exhibiting circularly polarized luminescence (CPL) via the interaction of an achiral terpyridine-based Zn^II complex with nucleotides. It was found that while the metal complexes could co-assemble with the nucleotides to form fluorescent assemblies, only a combination of furan-substituted terpyridine complex and ATP showed an intense CPL with a dissymmetry factor (g_lum ) as high as 0.20. This means that the complex could recognize ATP using CPL as a readout signal, thus providing an example of ATP encryption. Interestingly, when ATP was transferred into ADP or AMP under enzymatic hydrolysis, the CPL decreases or disappears. Addition of ATP generates CPL again, thus producing an ATP-induced CPL system. This work presents the first example of ATP-induced CPL and encryption.