Origins of Acid-Gas Stability Behavior in Zeolitic Imidazolate Frameworks: The Unique High Stability of ZIF-71

Porous Calcium-Silicate-Hydrate as a Low-Cost Nano-Platform for Ultra-High CO2 Capture and Storage

CO2 capture and storage have been regarded as promising concepts to reduce anthropogenic CO2 emissions. However, the high cost, inferior adsorption capacity, and higher effective activation temperature of traditional sorbents limit their practical application in efficient CO2 capture. Here, a C-S-H@ZIF-8 (C-S-Z) sorbent is fabricated by in situ growth of the ZIF-8 shell on the C-S-H (calcium-silicate-hydrate) surface for ultra-high CO2 adsorption and storage. Among the C-S-Z, the outer ZIF-8 shell acts as a transport channel that promotes CO2 absorption toward the underlying C-S-H substrate for accelerated carbonation while preventing nitrogen and water from reaching the interior C-S-H. As a consequence, C-S-Z possesses the merits of ample pyrrolic nitrogen, porous structure, and ultra-high surface area (577.18 m2 g-1), that contribute to an ultra-high CO2 capture capacity, reaching 293.6 mg g-1. DFT calculations show a high CO2 adsorption energy and the mineral carbonation is dominant by the adsorption process. In particular, the advantages of the outstanding adsorption capacity, low cost, and high CO2 selectivity make this C-S-H-based sorbent hold great potential in the practical application for direct air CO2 capture and storage.

Direct Optical Patterning of Metal-Organic Frameworks via Photoacid-Induced Etching

Metal-organic frameworks (MOFs) are a class of porous materials constructed from organic linkers and inorganic building blocks. Coordinative competition labilizes some MOFs under harsh chemical conditions because of their weak bonding. However, instability is not always a negative property of a material. In this study, we demonstrated the use of the acidic lability of MOFs for direct optical patterning. The controllable acid release from the photoacid generator at the exposed area causes bond cleavage between the linkers and metal ions/clusters, leading to solubility changes and pattern formation after development. This process avoids redundant steps and possible contamination in traditional photolithography, while maintaining the original properties of patterned MOFs. The preserved porosity and crystallinity promoted the development of MOFs for gas sensors and solid displays.

Highly selective detection and removal of mercury ions in the aquatic environment based on magnetic ZIF-71 multifunctional composites with sufficient chlorine functional groups

The development of both detection and removal technologies for heavy metal ions is of great importance. Most of the existing adsorbents that contain oxygen, nitrogen or sulfur functional groups can remove heavy metals, but achieving both selective detection and removal of a single metal ion is difficult because they bind to a wide range of heavy metal ions. Herein, we selected zeolite imidazolium hydrochloride framework-71 (ZIF-71) with sufficient chlorine functional groups to fabricate magnetic ZIF-71 multifunctional composites (M-ZIF-71). M-ZIF-71 had a large specific surface area, excellent water stability, and good magnetic properties, which made M-ZIF-71 conducive to the separation and recovery of adsorbents and the assembly of electrodes. M-ZIF-71 exhibited high selectivity, wide linear range (1-500 μg/L), and low detection limit (0.32 μg/L) for electrochemical detection of mercury ions (Hg2+). Meanwhile, M-ZIF-71 demonstrated rapid Hg2+ adsorption with a high capacity of 571.2 mg/g and excellent recyclability. The high selectivity for Hg2+ was attributed to the powerful affinity of highly electronegative chlorine and Hg2+. Moreover, XPS spectra demonstrated the interaction between chlorine and Hg2+. This work provides a new inspiration for applications in the targeted monitoring and removal of heavy metal pollution.

Three in One: Superoleophilic, Chemically and Mechanically Resistant ZIF-7 and ZIF-11 Percolation Networks for Selective Permeation of Oils and Chlorinated Solvents

Imbuing superwetting functions to organic-inorganic hybrid networks displaying chemical resistance, self-cleaning ability, and selective permeation of liquids has received increasing attention in recent years. Here we report superhydrophobic ZIF-7 and ZIF-11 on multilayer fluorinated graphene (FG) nanosheets with long-lasting water-repellent features. By exploring the solution processing of these chemically resistant dispersions, superoleophilic FG-ZIF-7 stainless steel mesh (FG-ZIF-7-SSM) and FG-ZIF-11 over cotton cloth (FG-ZIF-11-CC) possessing superior adhesion were fabricated. These permselective oil-liking prototypes were explored toward mesitylene and crude oil pickup from chemically harsh marine conditions such as seawater, acidic water, and alkaline water, with a separation efficiency of 96-94% up to 10 cycles. Furthermore, using an FG-ZIF-11-CC-wrapped glass pipet, upward diffusion of chloroform from sea, acidic, and alkaline water in 45 s was demonstrated with a separation efficacy of 94% up to 20 cycles. In addition to the chemical resistance and reusability, the mechanical stability of FG-ZIF-7-SSM and FG-ZIF-11-CC was investigated through folding, tape peeling, and dragging through sandpaper up to 250 cycles, showing no signs of changes in the hydrophobic responses. This research sheds light on the application of physiochemically resistant percolation coatings based on fluorinated graphene multilayers supporting ZIF-7 and ZIF-11 toward oil/water separation.

Recovery of 2,3-Butanediol from Fermentation Broth by Zeolitic Imidazolate Frameworks

The efficient separation of the 2,3-butanediol (2,3-BDO) intermediate from fermentation broth is an important issue in the production of biofuels from biomass-derived intermediates. Two zeolitic imidazolate frameworks ZIF-8 and ZIF-71 were investigated for the adsorption of 2,3-butanediol (2,3-BDO) from fermentation broth via liquid breakthrough adsorption measurements. While both ZIF materials initially show high separation performance, ZIF-71 retains robust separation performance even after aging in ethanol for two years, whereas the capacity of ZIF-8 decreases significantly. The robustness and stability of ZIF-71 are further confirmed with cyclic fixed bed adsorption measurements. The uptake of 2,3-BDO on ZIF-71 reaches >100 g/kg with negligible uptakes of sugars, organic acids, and other alcohols present in the fermentation broth. Excellent selectivity toward 2,3-BDO over water is also achieved. The 2,3-BDO-loaded ZIF-71 can be regenerated efficiently with ethanol as desorbent. These findings indicate that ZIF-71 shows considerable promise as an adsorbent to recover and purify diols from fermentation broths.

Ammonia Adsorption Performance of Zeolitic Imidazolate Frameworks for Cooling

Promoting the cooling performance of adsorption chillers (ACs) greatly relies on the exploration of high-performance adsorbent/refrigerant working pairs. Ammonia is not only an environmentally friendly refrigerant but also favorable for heat and mass transfer in ACs owing to its large vapor pressure and enthalpy of evaporation. Zeolite imidazolate frameworks (ZIFs) with excellent ammonia stability are identified as a class of potential adsorbents for practical ammonia-based ACs. However, high-performing ZIF/ammonia working pairs with excellent AC performance are still to be developed. In this work, the cooling performance including the coefficient of performance for cooling (COPC) and the specific cooling effects (SCEs) of 26 ZIFs with the same composites but different topologies was evaluated by combining molecular simulation and mathematical modeling. Five high-performing ZIFs with COPC > 0.45 and SCE > 250 kJ/kg were identified, among which gis-ZIF with the highest COPC of 0.51 and lta-ZIF with the highest SCE of 354 kJ/kg both are promising to be synthesized and applied further. Besides, the quantitative structure-performance relationship (QSPR) was extracted that can help quickly identify and design high-performing ZIFs according to their ammonia adsorption isotherms and structural characteristics. Moreover, "S"-shaped adsorption isotherms with high saturation adsorption capacity (>0.2 g/g), suitable step position (0.2-0.4), and relatively low Henry's constant (<1 × 10-5 mol/(kg·Pa)) are more favorable for excellent COPC and SCE. From the perspective of structure characteristics, ZIFs possessing low crystal density (<0.9 g/cm3), high accessible surface area (>2000 m2/g), balanced largest cavity diameter (∼15 Å), and accessible pore volume (∼0.65 cm3/g) are beneficial for high-efficient cooling performance.

Hierarchical ZIF-8 Materials via Acid Gas-Induced Defect Sites: Synthesis, Characterization, and Functional Properties

Microporous metal-organic frameworks (MOFs) have been widely studied for molecular separation and catalysis. The uniform micropores of MOFs (<2 nm) can introduce diffusion limitations and render the interiors of the crystal inaccessible to target molecules. The introduction of hierarchical porosity (interconnected micro and mesopores) can enhance intra-crystalline diffusion while maintaining the separation/catalytic selectivity. Conventional hierarchical MOF synthesis involves complex strategies such as elongated linkers, soft templating, and sacrificial templates. Here, we demonstrate a more general approach using our controlled acid gas-enabled degradation and reconstruction (Solvent-Assisted Crystal Redemption) strategy. Selective linker labilization of ZIF-8 is shown to generate a hierarchical pore structure with mesoporous cages (∼50 nm) while maintaining microporosity. Detailed structural and spectroscopic characterization of the controlled degradation, linker insertion, and subsequent linker thermolysis is presented to show the clustering of acid gas-induced defects and the generation of mesopores. These findings indicate the generality of controlled degradation and reconstruction as a means for linker insertion in a wider variety of MOFs and creating hierarchical porosity. Enhanced molecular diffusion and catalytic activity in the hierarchical ZIF-8 are demonstrated by the adsorption kinetics of 1-butanol and a Knoevenagel condensation reaction.

Surface, Interface and Structure Optimization of Metal-Organic Frameworks: Towards Efficient Resourceful Conversion of Industrial Waste Gases

Industrial waste gas emissions from fossil fuel over-exploitation have aroused great attention in modern society. Recently, metal-organic frameworks (MOFs) have been developed in the capture and catalytic conversion of industrial exhaust gases such as SO₂ , H₂ S, NO_x , CO₂ , CO, etc. Based on these resourceful conversion applications, in this review, we summarize the crucial role of the surface, interface, and structure optimization of MOFs for performance enhancement. The main points include (1) adsorption enhancement of target molecules by surface functional modification, (2) promotion of catalytic reaction kinetics through enhanced coupling in interfaces, and (3) adaptive matching of guest molecules by structural and pore size modulation. We expect that this review will provide valuable references and illumination for the design and development of MOF and related materials with excellent exhaust gas treatment performance.

Kinetic Model of Acid Gas Induced Defect Propagation in Zeolitic Imidazolate Frameworks

Understanding the degradation of nanoporous materials under exposure to common acid gas contaminants (e.g., SO₂, CO₂, NO₂, and H₂S) is essential to elongate their lifetime and thus enable their practical applications in separations and catalysis. Previous theoretical investigations have focused on the formation of isolated point defects, which are insufficient to provide direct insights into the long-term evolution of the bulk properties of materials such as zeolitic imidazolate frameworks (ZIFs) under sustained acid gas exposure. To bridge this divide in both length and time scales, we developed a first-principles lattice-based kinetic model to simulate the defect propagation and bulk material breakdown in ZIFs. This model closely reproduces the experimentally measured macroscopic evolution of the time-dependent bulk materials proprieties and also yields important new insights regarding the autocatalytic nature of ZIF degradation and the spatial distribution of defects. Our results suggest new experimental directions to identify nascent defect clusters in degraded ZIFs and avenues to mitigate degradation under challenging conditions of acid gas exposure.

Full-nitro-nitroamino cooperative action: Climbing the energy peak of benzenes with enhanced chemical stability

More nitro groups accord benzenes with higher energy but lower chemical stability. Hexanitrobenzene (HNB) with a fully nitrated structure has stood as the energy peak of organic explosives since 1966, but it is very unstable and even decomposes in moist air. To increase the energy limit and strike a balance between energy and chemical stability, we propose an interval full-nitro-nitroamino cooperative strategy to present a new fully nitrated benzene, 1,3,5-trinitro-2,4,6-trinitroaminobenzene (TNTNB), which was synthesized using an acylation-activation-nitration method. TNTNB exhibits a high density (d: 1.995 g cm^-3 at 173 K, 1.964 g cm^-3 at 298 K) and excellent heat of detonation (Q: 7179 kJ kg^-1), which significantly exceed those of HNB (Q: 6993 kJ kg^-1) and the state-of-the-art explosive CL-20 (Q: 6534 kJ kg^-1); thus, TNTNB represents the new energy peak for organic explosives. Compared to HNB, TNTNB also exhibits enhanced chemical stability in water, acids, and bases.