A Highly Strained Al-Al σ-Bond in Dianionic Aluminum Analog of Oxirane for Molecule Activation

Reducing hybrid ligand-based alane and chasing aluminium(I): dialane and unusual transient dialumene

In this work, an alane, [DNIAlH2] (1) (DNI = 3,3-dimethyl-2-[2-methyl-2-(2,6-diisopropyl-aniline)ethenyl]-3H-indolenine), stabilised by a hybrid ligand was reduced by Jones's Mg(I) ([(MesBDIMg)2]) and Roesky's Al(I) ([DippBDIAl:]). The resulting dialane compound [{DNI(H)Al}2] (2) was characterised using NMR spectroscopy, mass spectrometry, DFT calculations and single-crystal XRD experiments. The reaction of aluminium dihydride [DNIAlH2] (1) with [DippBDIAl:] at high temperatures gives an intramolecular C(sp2)-H bond-activated compound 3. To study the monomeric hybrid ligand-based Al(I), characterisations and computational calculations were performed, which elucidate that compound 5, consisting of two inequivalent aluminium atoms in an Al2CN four-membered ring, resulting from the activation of a carbon-nitrogen bond in the reaction of [DNINa] with [(Cp*Al)4].

Low oxidation state and hydrido group 2 complexes: synthesis and applications in the activation of gaseous substrates

Numerous industrial processes utilise gaseous chemical feedstocks to produce useful chemical products. Atmospheric and other small molecule gases, including anthropogenic waste products (e.g. carbon dioxide), can be viewed as sustainable building blocks to access value-added chemical commodities and materials. While transition metal complexes have been well documented in the reduction and transformation of these substrates, molecular complexes of the terrestrially abundant alkaline earth metals have also demonstrated promise with remarkable reactivity reported towards an array of industrially relevant gases over the past two decades. This review covers low oxidation state and hydrido group 2 complexes and their role in the reduction and transformation of a selection of important gaseous substrates towards value-added chemical products.

Reversible [4 + 1] Cycloaddition of Arenes by a "Naked" Acyclic Aluminyl Compound

The large steric profile of the N-heterocyclic boryloxy ligand, -OB(NDippCH)2, and its ability to stabilize the metal-centered HOMO, are exploited in the synthesis of the first example of a "naked" acyclic aluminyl complex, [K(2.2.2-crypt)][Al{OB(NDippCH)2}2]. This system, which is formed by substitution at AlI (rather than reduction of AlIII), represents the first O-ligated aluminyl compound and is shown to be capable of hitherto unprecedented reversible single-site [4 + 1] cycloaddition of benzene. This chemistry and the unusual regioselectivity of the related cycloaddition of anthracene are shown to be highly dependent on the availability (or otherwise) of the K+ countercation.

Recent advances in the chemistry of isolable carbene analogues with group 13-15 elements

Carbenes (R2C:), compounds with a divalent carbon atom containing only six valence shell electrons, have evolved into a broader class with the replacement of the carbene carbon or the RC moiety with main group elements, leading to the creation of main group carbene analogues. These analogues, mirroring the electronic structure of carbenes (a lone pair of electrons and an empty orbital), demonstrate unique reactivity. Over the last three decades, this area has seen substantial advancements, paralleling the innovations in carbene chemistry. Recent studies have revealed a spectrum of unique carbene analogues, such as monocoordinate aluminylenes, nitrenes, and bismuthinidenes, notable for their extraordinary properties and diverse reactivity, offering promising applications in small molecule activation. This review delves into the isolable main group carbene analogues that are in the forefront from 2010 and beyond, spanning elements from group 13 (B, Al, Ga, In, and Tl), group 14 (Si, Ge, Sn, and Pb) and group 15 (N, P, As, Sb, and Bi). Specifically, this review focuses on the potential amphiphilic species that possess both lone pairs of electrons and vacant orbitals. We detail their comprehensive synthesis and stabilization strategies, outlining the reactivity arising from their distinct structural characteristics.

Highly Stable 72-Nuclearity Nanocages for Efficient Synthesis of Aryl Nitriles via Ni/Cu Synergistic Catalysis

Seeking noble-metal-free catalysts for efficient synthesis of aryl nitriles under mild conditions poses a significant challenge due to the use of hypertoxic cyanides or high-pressure/temperature NH3/O2 in conventional synthesis processes. Herein, we developed a novel framework 1 assembled by [Ni72] nanocages with excellent solvents/pH stability. To investigate the structure-activity relationship of catalytic performance, several isostructural MOFs with different molar ratios of Ni/Cu by doping Cu2+ into framework 1 (Ni0.59Cu0.41 (2), Ni0.81Cu0.19 (3), Ni0.88Cu0.12 (4), and Ni0.92Cu0.08 (5)) were prepared. Catalytic studies revealed that catalyst 3 exhibited remarkable performance in the synthesis of aryl nitriles, utilizing a formamide alternative to hypertoxic NaCN/KCN. Notably, catalyst 3 achieved an excellent TOF value of 9.8 h-1. Furthermore, catalyst 3 demonstrated its applicability in a gram-scale experiment and maintained its catalytic performance even after six recycling cycles, owing to its high stability resulting from significant electrostatic and orbital interactions between the Ni center and ligands as well as a large SOMO-LUMO energy gap supported by DFT calculations. Control experiments and DFT calculations further revealed that the excellent catalytic performance of catalyst 3 originated from the synergistic effect of Ni/Cu. Importantly, this work not only provides a highly feasible method to construct highly stable MOFs containing multinuclear nanocages with exceptional catalytic performance but also represents the first example of a heterogeneous catalyst for the synthesis of aryl nitriles using formamide as the cyanide source.

Dearomatization of C6 Aromatic Hydrocarbons by Main Group Complexes

The dearomatization reaction is a powerful method for transformation of simple aromatic compounds to unique chemical architectures rapidly in synthetic chemistry. Over the past decades, the chemistry in this field has evolved significantly and various important organic compounds such as crucial bioactive molecules have been synthesized through dearomatization. In general, photochemical conditions or assistance by transition metals are required for dearomatization of rigid arenes. Recently, main-group elements, especially naturally abundant elements in the Earth's crust, have attracted attention as they have low toxicity and are cost-effective compared to the late transition metals. In recent decades, a variety of low-valent main-group molecules, which enable the activation of stable aromatic compounds under mild conditions, have been developed. This minireview highlights the developments in the chemistry of dearomatization of C6 aromatic hydrocarbons by main-group compounds leading to the formation of seven-membered EC6 (E=main-group elements) ring or cycloaddition products.

Carbon-carbon bond activation by Mg, Al, and Zn complexes

Examples of carbon-carbon bond activation reactions at Mg, Al, and Zn are described in this review. Several distinct mechanisms for C-C bond activation at these metals have been proposed, with the key C-C bond activation step occurring by (i) α-alkyl elimination, (ii) β-alkyl elimination, (iii) oxidative addition, or (iv) an electrocyclic reaction. Many of the known pathways involve an overall 2-electron redox process. Despite this, the direct oxidative addition of C-C bonds to these metals is relatively rare, instead most reactions occur through initial installation of the metal on a hydrocarbon scaffold (e.g. by a cycloaddition reaction or hydrometallation) followed by an α-alkyl or β-alkyl elimination step. Emerging applications of Mg, Al, and Zn complexes as catalysts for the functionalisation of C-C bonds are also discussed.

On the Reactivity of Mes*P(PMe3 ) towards Aluminum(I) Compounds - Evidence for the Intermediate Formation of Phosphaalumenes

Phosphaalumenes are the heavier isoelectronic analogs of alkynes and have eluded facile synthesis until recently. We have reported that the combination of a phosphinidene transfer agent, Ar TerP(PMe3 ) (Ar Ter=2,6-Ar2 -C6 H3 ), with (Cp*Al)4 (Cp*=C5 (CH3 )5 ) afforded the phosphaalumenes Ar TerPAlCp* as isolable, violet, thermally stable compounds. In here we describe attempts to utilize Mes*P(PMe3 ) (Mes*=2,4,6-tBu3 -C6 H2 ) as a phosphinidene source in combination with different Al(I) precursors, namely Dip NacnacAl (Dip Nacnac=HC[C(Me)NDip]2 , Dip=2,6-iPr2 -C6 H3 ), (Cp*Al)4 and Cp3t Al (Cp3t =1,2,4-tBu3 -C5 H2 ). In all cases the formation of phosphaalumenes was not observed, however, their intermediate formation is indicated by formation of the dimer [Cp*Al(μ-PMes*)]2 (2) and C-H-bond activation products along the putative P=Al bond, giving unusual 1,2-P,Al-tetrahydronaphtalene derivatives 1 and 4, clearly underlining the role the sterically demanding group on phosphorus plays in these transformations. The reactivity studies are supported by theoretical studies, demonstrating a thermodynamic preference for the C-H activation products. Additionally, we show that there are potential pitfalls in the synthesis of Cp*2 AlH, the precursor to make (Cp*Al)4 and give recommendations how to circumvent these.

Three-Membered Aluminacycles

Three-membered-ring scaffolds of carbocycles, namely, cyclopropanes and cyclopropenes, are ubiquitous in natural products and pharmaceutical molecules. These molecules exhibit a peculiar reactivity, and their applications as synthetic intermediates and versatile building blocks in organic synthesis have been extensively studied over the past century. The incorporation of heteroatoms into three-membered cyclic structures has attracted significant attention, reflecting fundamental differences in their electronic/geometric structures and reactivities compared to their carbon congeners and their associated potential for exploitation in applications. Recently, the chemistry of low-valent aluminum species, alumylenes, dialumenes, and aluminyl anions, has dramatically developed, which has allowed access to hitherto unprecedented aluminacycles. This Perspective focuses upon advances in the chemistry of three-membered aluminacycles, including their synthetic protocols, spectroscopic and structural properties, and reactivity toward various substrates and small molecules.

Selective Cleavage of the Strong or Weak C-C Bonds in Biphenylene Enabled by Rare-Earth Metals

Selective cleavage of C-C bonds within arene rings is of great interest but remains elusive, especially for the molecules possessing the active and inert C-C bonds. Here, we report that the active and inert C-C bonds of biphenylene could be controllably cleaved by the reaction of biphenylene, potassium graphite, and rare-earth complexes with different metal centers. For scandium, the bond activation occurs at the C_aryl-C_aryl single bond, yielding 9-scandafluorene. For Lu, the reaction goes through ring contraction of the aromatic ring in biphenylene to provide benzopentalene dianionic lutetium. The origin of the selectivity and the reaction mechanism were illustrated by the isolation of intermediates and DFT calculations.

Inducing Nucleophilic Reactivity at Beryllium with an Aluminyl Ligand

The reactions of anionic aluminium or gallium nucleophiles {K[E(NON)]}₂ (E = Al, 1; Ga, 2; NON = 4,5-bis(2,6-diisopropylanilido)-2,7-ditert-butyl-9,9-dimethylxanthene) with beryllocene (BeCp₂) led to the displacement of one cyclopentadienyl ligand at beryllium and the formation of compounds containing Be-Al or Be-Ga bonds (NON)EBeCp (E = Al, 3; Ga, 4). The Be-Al bond in the beryllium-aluminyl complex [2.310(4) Å] is much shorter than that found in the small number of previous examples [2.368(2) to 2.432(6) Å], and quantum chemical calculations suggest the existence of a non-nuclear attractor (NNA) for the Be-Al interaction. This represents the first example of a NNA for a heteroatomic interaction in an isolated molecular complex. As a result of this unusual electronic structure and the similarity in the Pauling electronegativities of beryllium and aluminium, the charge at the beryllium center (+1.39) in 3 is calculated to be less positive than that of the aluminium center (+1.88). This calculated charge distribution suggests the possibility for nucleophilic behavior at beryllium and correlates with the observed reactivity of the beryllium-aluminyl complex with N,N'-diisopropylcarbodiimide─the electrophilic carbon center of the carbodiimide undergoes nucleophilic attack by beryllium, thereby yielding a beryllium-diaminocarbene complex.

Probing a General Strategy to Break the C-C Bond of Benzene by a Cyclic (Alkyl)(Amino)Aluminyl Anion

The oxidative addition of C-C bonds in aromatic hydrocarbons by low valent main group species has attracted considerable attention from both theoretical and experimental chemists due to the big challenge in breaking their aromaticity. Herein, a general strategy to break the C-C bonds in benzene by cyclic (alkyl)(amino)aluminyl anion is demonstrated via density functional theory (DFT) calculations. The results suggest that the activation of the C-C bond of benzene by this anion is both kinetically and thermodynamically unfavorable whereas introducing electron-withdrawing groups makes such C-C bond activation becomes favorable both kinetically and thermodynamically. Such a sharp change on the kinetics and thermodynamics could be rationalized by the frontier molecular orbital theory by decreasing the lowest unoccupied molecular orbitals of the mono- and disubstituted benzenes. Aromaticity is found to stabilize the transition state for the ring open step. All these findings can help develop the chemistry of small-molecule activation.

Structure and bonding of proximity-enforced main-group dimers stabilized by a rigid naphthyridine diimine ligand

The development of ligands capable of effectively stabilizing highly reactive main-group species has led to the experimental realization of a variety of systems with fascinating properties. In this work, we computationally investigate the electronic, structural, energetic, and bonding features of proximity-enforced group 13-15 homodimers stabilized by a rigid expanded pincer ligand based on the 1,8-naphthyridine (napy) core. We show that the redox-active naphthyridine diimine (NDI) ligand enables a wide variety of structural motifs and element-element interaction modes, the latter ranging from isolated, element-centered lone pairs (e.g., E = Si, Ge) to cases where through-space π bonds (E = Pb), element-element multiple bonds (E = P, As) and biradical ground states (E = N) are observed. Our results hint at the feasibility of NDI-E₂ species as viable synthetic targets, highlighting the versatility and potential applications of napy-based ligands in main-group chemistry.

Cationic dialanes with fluxional π-bridged cyclopentadienyl ligands

Unique π-cyclopentadienyl bridged dialanes are synthesized as complex salts with aluminate anions by comproportionation of aluminocenium cations [Al^III(Cp)(Cp*)]⁺/[Al^IIICp₂]⁺ with [(Al^ICp*)₄]. Very short Al-Al bond lengths occur in positively charged Al₂⁴⁺ fragments. Intriguingly, the prepared asymmetric dialane shows a unique fluxional coordination of the cyclopentadienyl ligands.

Direct Comparison of Subvalent, Polycationic Group 13 Cluster Compounds: Lessons learned on Isoelectronic DMPE Substituted Gallium and Indium Tetracation Salts

The tetracationic, univalent cluster compounds [{M(dmpe)}₄ ]⁴⁺ (M=Ga, In; dmpe=bis(dimethylphosphino)ethane) were synthesized as their pf salts ([pf]^- =[Al(OR^F )₄ ]^- ; R^F =C(CF₃ )₃ ). The four-membered ring in [{M(dmpe)}₄ ]⁴⁺ is slightly puckered for M=Ga and almost square planar for M=In. Yet, although structurally similar, only the gallium cluster is prevalent in solution, while the indium cluster forms temperature dependent equilibria that include even the monomeric cation [In(dmpe)]⁺ . This system is the first report of one and the same ligand inducing formation of isoelectronic and isostructural gallium/indium cluster cations. The system allows to study systematically analogies and differences with thermodynamic considerations and bonding analyses, but also to outline perspectives for bond activation using cationic, subvalent group 13 clusters.

Deoxygenating Reduction of CO2 by [Cp*Al]4 to Form a (Al3O2C)2 Cluster Featuring Two Ketene Moieties

Herein we report that the reaction of the low-valent aluminum(I) species [Cp*Al]₄ (Cp* = pentamethylcyclopentadienyl) with CO₂ exhibits complete cleavages of the C═O bonds. The deoxygenating reduction reaction of [Cp*Al]₄ with CO₂ at 120 °C afforded [(Cp*)₃Al₃O₂C(CO)]₂ (1), which featured two stacked (Al₃O₂C)₂ units and two C═C═O ketene moieties. Moreover, the isoelectronic analogues of diimine and isothiocyanate with CO₂ were also investigated, and the reactions of [Cp*Al]₄ with Dipp*-N═C═N-Dipp* and Dipp-C═N═S [Dipp* = 2,6-bis(diphenylmethyl)-4-tert-butylphenyl; Dipp = 2,6-diisopropylphenyl] afforded dialuminylimine (2) and tetrameric [Cp*AlS]₄ (3), respectively.