Imidacloprid Crystal Polymorphs for Disease Vector Control and Pollinator Protection

Unprecedented Packing Polymorphism of Oxindole: An Exploration Inspired by Crystal Structure Prediction

Crystal polymorphism, characterized by different packing arrangements of the same compound, strongly ties to the physical properties of a molecule. Determining the polymorphic landscape is complex and time-consuming, with the number of experimentally observed polymorphs varying widely from molecule to molecule. Furthermore, disappearing polymorphs, the phenomenon whereby experimentally observed forms cannot be reproduced, pose a significant challenge for the pharmaceutical industry. Herein, we focused on oxindole (OX), a small rigid molecule with four known polymorphs, including a reported disappearing form. Using crystal structure prediction (CSP), we assessed OX solid-state landscape and thermodynamic stability by comparing predicted structures with experimentally known forms. We then performed melt and solution crystallization in bulk and nanoconfinement to validate our predictions. These experiments successfully reproduced the known forms and led to the discovery of four novel polymorphs. Our approach provided insights into reconstructing disappearing polymorphs and building more comprehensive polymorph landscapes. These results also establish a new record of packing polymorphism for rigid molecules.

Efficient Screening of Pharmaceutical Cocrystals by Microspacing In-Air Sublimation

Cocrystal screening and single-crystal growth remain the primary obstacles in the development of pharmaceutical cocrystals. Here, we present a new approach for cocrystal screening, microspacing in-air sublimation (MAS), to obtain new cocrystals and grow high-quality single crystals of cocrystals within tens of minutes. The method possesses the advantages of strong designable ability of devices, user-friendly control, and compatibility with materials, especially for the thermolabile molecules. A novel drug-drug cocrystal of favipiravir (FPV) with salicylamide (SAA) was first discovered by this method, which shows improved physiochemical properties. Furthermore, this method proved effective in cultivating single crystals of FPV-isonicotinamide (FPV-INIA), FPV-urea, FPV-nicotinamide (FPV-NIA), and FPV-tromethamine (FPV-Tro) cocrystals, and the structures of these cocrystals were determined for the first time. By adjusting the growth temperature and growth distance precisely, we also achieved single crystals of 10 different paracetamol (PCA) cocrystals and piracetam (PIR) cocrystals, which underscores the versatility and efficiency of this method in pharmaceutical cocrystal screening.

Extra-corporeal detoxification in insects

Upon uptake of toxins, insects launch a detoxification program. This program is deployed in multiple organs and cells to raise their tolerance against the toxin. The molecular mechanisms of this program inside the insect body have been studied and understood in detail. Here, we report on a yet unexplored extra-corporeal detoxification of insecticides in Drosophila melanogaster. Wild-type D. melanogaster incubated with DDT, a contact insecticide, in a closed environment died as expected. However, incubation of a second cohort in the same environment after removal of the dead flies was not lethal. The effect was significantly lower if the flies of the two cohorts were unrelated. Incubation assays with Chlorpyrifos, another contact insecticide, yielded identical results, while incubation assays with Chlorantraniliprole, again a contact insecticide, was toxic for the second cohort of flies. A cohort of flies incubated in a DDT environment after an initial incubation of a honeybee survived treatment. Together, our data suggest that insects including Apis mellifera and D. melanogaster have the capacity to modify their proximate environment. Consequently, in their ecological niche, following individuals might be saved from intoxication thereby facilitating colonisation of an attractive site.

ROY Crystallization on Poly(ethylene) Fibers, a Model for Bed Net Crystallography

Many long-lasting insecticidal bed nets for protection against disease vectors consist of poly(ethylene) fibers in which insecticide is incorporated during manufacture. Insecticide molecules diffuse from within the supersaturated polymers to surfaces where they become bioavailable to insects and often crystallize, a process known as blooming. Recent studies revealed that contact insecticides can be highly polymorphic. Moreover, insecticidal activity is polymorph-dependent, with forms having a higher crystal free energy yielding faster insect knockdown and mortality. Consequently, the crystallographic characterization of insecticide crystals that form on fibers is critical to understanding net function and improving net performance. Structural characterization of insecticide crystals on bed net fiber surfaces, let alone their polymorphs, has been elusive owing to the minute size of the crystals, however. Using the highly polymorphous compound ROY (5-methyl-2-[(2-nitrophenyl)-amino]thiophene-3-carbonitrile) as a proxy for insecticide crystallization, we investigated blooming and crystal formation on the surface of extruded poly(ethylene) fibers containing ROY. The blooming rates, tracked from the time of extrusion, were determined by UV-vis spectroscopy after successive washes. Six crystalline polymorphs (of the 13 known) were observed on poly(ethylene) fiber surfaces, and they were identified and characterized by Raman microscopy, scanning electron microscopy, and 3D electron diffraction. These observations reveal that the crystallization and phase behavior of polymorphs forming on poly(ethylene) fibers is complex and dynamic. The characterization of blooming and microcrystals underscores the importance of bed net crystallography for the optimization of bed net performance.

Nuclear quantum effects in the acetylene:ammonia plastic co-crystal

Organic molecular solids can exhibit rich phase diagrams. In addition to structurally unique phases, translational and rotational degrees of freedom can melt at different state points, giving rise to partially disordered solid phases. The structural and dynamic disorder in these materials can have a significant impact on the physical properties of the organic solid, necessitating a thorough understanding of disorder at the atomic scale. When these disordered phases form at low temperatures, especially in crystals with light nuclei, the prediction of material properties can be complicated by the importance of nuclear quantum effects. As an example, we investigate nuclear quantum effects on the structure and dynamics of the orientationally disordered, translationally ordered plastic phase of the acetylene:ammonia (1:1) co-crystal that is expected to exist on the surface of Saturn's moon Titan. Titan's low surface temperature (∼90 K) suggests that the quantum mechanical behavior of nuclei may be important in this and other molecular solids in these environments. By using neural network potentials combined with ring polymer molecular dynamics simulations, we show that nuclear quantum effects increase orientational disorder and rotational dynamics within the acetylene:ammonia (1:1) co-crystal by weakening hydrogen bonds. Our results suggest that nuclear quantum effects are important to accurately model molecular solids and their physical properties in low-temperature environments.

Insect cuticle and insecticide development

Insecticide resistance poses a significant challenge, diminishing the effectiveness of chemical insecticides. To address this global concern, the development of novel and efficient pest management technologies based on chemical insecticides is an ongoing necessity. The insect cuticle, a highly complex and continuously renewing organ, plays a crucial role in this context. On one hand, as the most vital structure, it serves as a suitable target for insecticides. On the other hand, it acts as the outermost barrier, isolating the insect's inner organs from the environment, and thus offering resistance to contact with insecticides, preventing their entry into insect bodies. Our work focuses on key targets concerning cuticle formation and the interaction between the cuticle and contact insecticides. Deeper studying insect cuticles and understanding their structure-function relationship, formation process, and regulatory mechanisms during cuticle development, as well as investigating insecticide resistance related to the barrier properties of insect cuticles, are promising strategies not only for developing novel insecticides but also for discovering general synergists for contact insecticides. With this comprehensive review, we hope to contribute valuable insights into the development of effective pest management solutions and the mitigation of insecticide resistance.

Ritonavir Revisited: Melt Crystallization Can Easily Find the Late-Appearing Polymorph II and Unexpectedly Discover a New Polymorph III

Identification of a thermodynamically stable polymorph is an important step in the early stage of drug development. Ritonavir (RIT) is a well-known case where the most stable polymorph II emerged after being marketed, leading to a loss of $250 million. Herein, we report the findings that routine melt crystallization can reveal the late-appearing polymorph II of RIT at small supercooling, but the probability of nucleation is very low. The addition of 30-50% polyethylene glycol (PEG) promotes the crystallization of Form II as the only phase at low supercooling, making it easier to detect in polymorphism screening. During the course of our research, a new polymorph, denoted Form III, was unexpectedly discovered, crystallizing as the major phase from neat RIT melts. Single crystals of Form III were grown from melt microdroplets. Benefiting from the ability of synchrotron radiation to detect weak diffraction signals that cannot be accessible by a laboratory diffractometer, a reasonable structure of Form III was solved with slight disorder relative to thiazole groups (P1 space group and Z' = 4). The thermodynamic stability ranking of the three true polymorphs is Form II > Form I > Form III, as opposed to the order of solubility. The capacity to efficiently reveal rich polymorphs, especially the kinetically hindered polymorph, and rapidly grow single crystals of a new phase for structure determination together highlights the necessity of incorporating melt crystallization into routine methods for pharmaceutical polymorphism screening.

Insecticidal and Repellent Properties of Rapid-Acting Fluorine-Containing Compounds against Aedes aegypti Mosquitoes

The development of safe and potent insecticides remains an integral part of a multifaceted strategy to effectively control human-disease-transmitting insect vectors. Incorporating fluorine can dramatically alter the physiochemical properties and bioavailability of insecticides. For example, 1,1,1-trichloro-2,2-bis(4-fluorophenyl)ethane (DFDT)─a difluoro congener of trichloro-2,2-bis(4-chlorophenyl)ethane (DDT)─was demonstrated previously to be 10-fold less toxic to mosquitoes than DDT in terms of LD50 values, but it exhibited a 4-fold faster knockdown. Described herein is the discovery of fluorine-containing 1-aryl-2,2,2-trichloro-ethan-1-ols (FTEs, for fluorophenyl-trichloromethyl-ethanols). FTEs, particularly per-fluorophenyl-trichloromethyl-ethanol (PFTE), exhibited rapid knockdown not only against Drosophila melanogaster but also against susceptible and resistant Aedes aegypti mosquitoes, major vectors of Dengue, Zika, yellow fever, and Chikungunya viruses. The R enantiomer of any chiral FTE, synthesized enantioselectively, exhibited faster knockdown than its corresponding S enantiomer. PFTE does not prolong the opening of mosquito sodium channels that are characteristic of the action of DDT and pyrethroid insecticides. In addition, pyrethroid/DDT-resistant Ae. aegypti strains having enhanced P450-mediated detoxification and/or carrying sodium channel mutations that confer knockdown resistance were not cross-resistant to PFTE. These results indicate a mechanism of PFTE insecticidal action distinct from that of pyrethroids or DDT. Furthermore, PFTE elicited spatial repellency at concentrations as low as 10 ppm in a hand-in-cage assay. PFTE and MFTE were found to possess low mammalian toxicity. These results suggest the substantial potential of FTEs as a new class of compounds for controlling insect vectors, including pyrethroid/DDT-resistant mosquitoes. Further investigations of FTE insecticidal and repellency mechanisms could provide important insights into how incorporation of fluorine influences the rapid lethality and mosquito sensing.

Overcoming insecticide resistance in Anopheles mosquitoes by using faster-acting solid forms of deltamethrin

BACKGROUND

Controlling malaria-transmitting Anopheles mosquitoes with pyrethroid insecticides is becoming increasingly challenging because of widespread resistance amongst vector populations. The development of new insecticides and insecticidal formulations is time consuming and costly, however. A more active crystalline form of deltamethrin, prepared by heating the commercial crystalline form, previously was reported to be 12-times faster acting against susceptible North American Anopheles quadrimaculatus mosquitoes. Herein the potential for heat-activated deltamethrin dispersed on chalk to overcome various resistance mechanisms amongst five West African Anopheles strains is investigated, and its long-term sustained lethality evaluated.

METHODS

The more active deltamethrin form was generated in a commercial dust containing deltamethrin by heating the material as purchased. Tarsal contact bioassays were conducted to investigate its efficacy, potency, and speed of action against resistant Anopheles populations compared to the commercially available form of deltamethrin dust.

RESULTS

In all cases, D-Fense Dust heated to generate the more active form of deltamethrin was substantially more effective than the commercially available formulation. 100% of both Banfora M and Kisumu populations were knocked down 10 min post-exposure with no recovery afterwards. Gaoua-ara and Tiefora strains exhibited 100% knockdown within 15 min, and the VK7 2014 strain exhibited 100% knockdown within 20 min. In all cases, 100% mortality was observed 24 h post-exposure. Conversely, the commercial formulation (unheated) resulted in less than 4% mortality amongst VK7 2014, Banfora, and Gaoua-ara populations by 24 h, and Tiefora and Kisumu mosquitoes experienced 14 and 47% mortality by 24 h, respectively. The heat-activated dust maintained comparable efficacy 13 months after heating.

CONCLUSIONS

The heat-activated form of commercial deltamethrin D-Fense Dust outperformed the material as purchased, dramatically increasing efficacy against all tested pyrethroid-resistant strains. This increase in lethality was retained for 13 months of storage under ambient conditions in the laboratory. Higher energy forms of commonly used insecticides may be employed to overcome various resistance mechanisms seen in African Anopheles mosquitoes through more rapid uptake of insecticide molecules from their respective solid surfaces. That is, resistant mosquitoes can be killed with an insecticide to which they are resistant without altering the molecular composition of the insecticide.

Direct structure determination of vemurafenib polymorphism from compact spherulites using 3D electron diffraction

The spherulitic morphology is considered to be the most common morphology of crystalline materials and is particularly apparent in melt-crystallized products. Yet, historically, the polycrystalline nature of spherulites has hindered successful crystal structure determination. Here, we report the direct structure determination of a clinical drug, vemurafenib (VMN), in compact spherulite form using 3D electron diffraction (3D ED). VMN has four known polymorphs. We first solved the crystal structures of α-, β-, and γ-VMN from compact spherulites using 3D ED, and the resulting structures were highly consistent with those obtained by single-crystal X-ray diffraction. We then determined the crystal structure of δ-VMN-the least stable polymorph which cannot be cultivated as a single crystal-directly from the compact spherulite sample. We unexpectedly discovered a new polymorph during our studies, denoted as ε-VMN. Single crystals of ε-VMN are extremely thin and not suitable for study by X-ray diffraction. Again, we determined the structure of ε-VMN in a compact spherulite form. This successful structure elucidation of all five VMN polymorphs demonstrates the possibility of directly determining structures from melt-grown compact spherulite samples. Thereby, this discovery will improve the efficiency and broaden the scope of polymorphism research, especially within the field of melt crystallization.

Ritonavir Form III: A New Polymorph After 24 Years

Polymorphism occurs widely in pharmaceutical solids, and must be thoroughly studied during product development. Twenty-four years after ritonavir (RTV) Form II materialized, we report a new polymorph, Form III, discovered via melt crystallization. Form III has a unique PXRD pattern, Raman spectrum, lower melting point and heat of fusion, compared to the known polymorphs, Form I and Form II. It is the least stable form, monotropically, among the three polymorphs. Form III differs from Form I and Form II in molecular conformation and hydrogen bonding motifs in crystal lattice. Nucleation from RTV supercooled liquid is slow, and selected Form III exclusively. The discovery of RTV Form III demonstrates the importance of crystal nucleation studies. Crystallization from supercooled liquids should be incorporated as part of polymorph screening workflow.

Crystallography of Contemporary Contact Insecticides

The active forms of contact insecticides used for combatting mosquito-borne infectious diseases are typically crystalline solids. Numerous molecular crystals are polymorphic, crystallizing in several solid forms characterized by different physicochemical properties, including bioavailability. Our laboratory recently found that the activity of crystalline contact insecticides is inversely dependent on the thermodynamic stability of their polymorphs, suggesting that efficacy can be enhanced by the manipulation of the solid-state structure. This paper argues that crystallography should be central to the development of contact insecticides, particularly because their efficacy continues to be compromised by insecticide resistance, especially among Anopheles mosquito populations that spread malaria. Although insecticidal compounds with new modes of action have been introduced to overcome resistance, new insecticides are expensive to develop and implement. The repurposing of existing chemical agents in metastable, more active crystalline forms provides an inexpensive and efficient method for ‘evergreening’ compounds whose risks are already well-established. We report herein seven new single-crystal structures of insecticides used for controlling infectious disease vectors. The structures reported herein include pyrethroid insecticides recommended by the WHO for indoor residual spraying (IRS)-bifenthrin, β-cyfluthrin, etofenprox, α-cypermethrin, and λ-cyhalothrin as well as the neonicotinoid insecticide thiacloprid.

Packing Preferences of Chalcones: A Model Conjugated Pharmaceutical Scaffold

We sought the crystal packing preferences of the chalcone scaffold by analyzing 232 single-component crystal structures of chalcones with a small (six or fewer non-hydrogen atoms) substituent on either or both rings, including the unsubstituted molecule. This covers 216 molecules, as some are polymorphic, and 277 independent molecular conformations, as 16% of the crystal structures have more than one symmetry independent molecule. Quantum mechanical conformational profiles of the unsubstituted molecule and the almost 5000 crystal structures within 20 kJ mol^-1 of the global minimum generated in a crystal structure prediction (CSP) study have been used to complement this analysis. Although π conjugation would be expected to favor a planar molecule, there are a significant number of crystal structures containing nonplanar molecules with an approximately 50° angle between the aromatic rings. The relative orientations of the molecules in the inversion-related dimers and translation-related dimers in the experimental crystal structures show the same trends as in the CSP-generated structures for the unsubstituted molecule, allowing for the substituent making the side-to-side distances larger. There is no type of dimer geometry associated with particularly favorable lattice energies for the chalcone core. Less than a third of the experimental structures show a face-to-face contact associated with π···π stacking. Analysis of the experimental crystal structures with XPac and Mercury finds various pairs of isostructural crystals, but the largest isostructural set had only 15 structures, with all substituents (mainly halogens) in the para position. The most common one-dimensional motif, found in half of the experimental crystal structures, is a translation-related side-to-side packing, which can be adopted by all the observed conformations. This close-packed motif can be adopted by chalcones with a particularly wide variety of substituents as the substituents are at the periphery. Thus, although the crystal structures of the substituted chalcones show thermodynamically plausible packings of the chalcone scaffold, there is little evidence for any crystal engineering principle of preferred chalcone scaffold packing beyond close packing of the specific molecule.

Hierarchical Self-Assembly Pathways of Peptoid Helices and Sheets

Peptoids (N-substituted glycines) are a class of tailorable synthetic peptidomic polymers. Amphiphilic diblock peptoids have been engineered to assemble 2D crystalline lattices with applications in catalysis and molecular separations. Assembly is induced in an organic solvent/water mixture by evaporating the organic phase, but the assembly pathways remain uncharacterized. We conduct all-atom molecular dynamics simulations of Nbrpe6Nc6 as a prototypical amphiphilic diblock peptoid comprising an NH₂-capped block of six hydrophobic N-((4-bromophenyl)ethyl)glycine residues conjugated to a polar NH₃(CH₂)₅CO tail. We identify a thermodynamically controlled assembly mechanism by which monomers assemble into disordered aggregates that self-order into 1D chiral helical rods then 2D achiral crystalline sheets. We support our computational predictions with experimental observations of 1D rods using small-angle X-ray scattering, circular dichroism, and atomic force microscopy and 2D crystalline sheets using X-ray diffraction and atomic force microscopy. This work establishes a new understanding of hierarchical peptoid assembly and principles for the design of peptoid-based nanomaterials.