Pd(II)-Catalyzed Enantioselective C(sp3)-H Arylation of Cyclopropanes and Cyclobutanes Guided by Tertiary Alkylamines

Synthesis of Borylated (Aminomethyl)cyclopropanes Using C1-Bisnucleophiles

Lithiated 1,1-diborylalkanes have been used as nucleophilic coupling partners with a range of oxygen-based electrophiles, including esters, carbonyls, and epoxides. However, their reactivity with nitrogen-based electrophiles, such as aziridines, has remained relatively understudied. Herein, we show that lithiated 1,1-diborylalkanes react with α-halo and α-tosyl aziridines to yield borylated (aminomethyl)cyclopropanes-a privileged scaffold within medicinal chemistry. The reaction displays high levels of diastereoselectivity, enabling careful control of up to three stereocenters within a single transformation. DFT studies provide insight into the reaction mechanism, which diverges from that observed with analogous epihalohydrin starting materials. Derivatization studies were also performed on the products to demonstrate the utility of the boron and amine handles.

Alicyclic-Amine-Derived Imine-BF3 Complexes: Easy-to-Make Building Blocks for the Synthesis of Valuable α-Functionalized Azacycles

A new strategy to access α-functionalized alicyclic amines via their corresponding imine-BF3 complexes is reported. Isolable imine-BF3 complexes, readily prepared via dehydrohalogenation of N-bromoamines in a base-promoted/18-crown-6 catalyzed process followed by addition of boron trifluoride etherate, undergo reactions with a wide range of organometallic nucleophiles to afford α-functionalized azacycles. Organozinc and organomagnesium nucleophiles add at ambient temperatures, obviating the need for cryogenic conditions. In situ preparation of imine-BF3 complexes provides access to α-functionalized morpholines and piperazines directly from their parent amines in a single operation. α-Functionalized morpholines can be elaborated further, for instance by installing a second substituent in the α'-position.

β-C-H Allylation of Trialkylamines with Allenes Promoted by Synergistic Borane/Palladium Catalysis

Functionalization of the C(sp3 )-H bonds of trialkylamines is challenging, especially for reactions at positions other than the α position. Herein, we report a method for β-C(sp3 )-H allylation of trialkylamines. In these reactions, which involve synergistic borane/palladium catalysis, an enamine intermediate is first generated from the amine via α,β-dehydrogenation promoted by B(C6 F5 )3 and a base, and then the enamine undergoes palladium-catalyzed reaction with an allene to give the allylation product. Because the hydride and the proton resulting from the initial dehydrogenation are ultimately shuttled to the product by B(C6 F5 )3 and the palladium catalyst, respectively, these reactions show excellent atom economy. The establishment of this method paves the way for future studies of C-H functionalization of trialkylamines by means of synergistic borane/transition-metal catalysis.

π-Extension of Indoles Using Acrolein Linker: Synthesis of Indolo[3,2-a]carbazole-6-carbaldehydes and Racemosin B

A simple method for the synthesis of indolo[3,2-a]carbazole-6-carbaldehydes by the π-extension of indoles with acrolein is reported. The scope of the method is demonstrated with 33 examples. The products exhibit high activities toward advanced synthesis and are proved to be able to produce valuable chemicals, such as natural products, dyes, and organic fluorescent materials. In addition, the alkaloid racemosin B can be prepared by this method in two steps in ∼50% overall yield.

Selective C-H Activation of Unprotected Allylamines by Control of Catalyst Speciation

An outstanding challenge in the Pd-catalyzed functionalization of allylamines is the control of stereochemistry. Terminal alkenes preferentially undergo Heck-type reactions, while internal alkenes may undergo a mixture of Heck and C-H activation reactions that give mixtures of stereochemical products. In the case of unprotected allylamines, the challenge in achieving C-H activation is that facile in situ formation of Pd nanoparticles leads to preferential formation of trans rather than cis-substituted products. In this study we have demonstrated the feasibility of using mono-protected amino acid (MPAA) ligands as metal protecting groups to prevent aggregation and reduction, allowing the selective synthesis of free cis-arylated allylamines. This method complements Heck-selective methods, allowing complete stereochemical control over the synthesis of cinnamylamines, an important class of amine that can serve as therapeutics directly or as advanced intermediates. To highlight the utility of the methodology, we have demonstrated rapid access to mu opioid receptor ligands.

Synthesis of Polycyclic Imidazoles via α-C-H/N-H Annulation of Alicyclic Amines

Secondary alicyclic amines are converted to their corresponding ring-fused imidazoles in a simple procedure consisting of oxidative imine formation followed by a van Leusen reaction. Amines with an existing α-substituent undergo regioselective ring-fusion at the α'-position. This method was utilized in a synthesis of fadrozole.

Copper-Catalyzed Enantioselective Desymmetric Protosilylation of Prochiral Diynes: Access to Optically Functionalized Tertiary Alcohols

In this protocol, a copper-catalyzed desymmetric protosilylation of prochiral diynes was developed. The corresponding products were obtained in moderate to high yields and enantiomeric ratios. This approach provides a simple method for synthesizing functionalized chiral tertiary alcohols in the presence of a chiral pyridine-bisimidazoline (Pybim) ligand.

Metal-catalysed C-C bond formation at cyclopropanes

Cyclopropanes are important substructures in natural products and pharmaceuticals. Although traditional methods for their incorporation rely on cyclopropanation of an existing scaffold, the advent of transition-metal catalysis has enabled installation of functionalized cyclopropanes using cross-coupling reactions. The unique bonding and structural properties of cyclopropane render it more easily functionalized in transition-metal-catalysed cross-couplings than other C(sp³) substrates. The cyclopropane coupling partner can participate in polar cross-coupling reactions either as a nucleophile (organometallic reagents) or as an electrophile (cyclopropyl halides). More recently, single-electron transformations featuring cyclopropyl radicals have emerged. This Review will provide an overview of transition-metal-catalysed C-C bond formation reactions at cyclopropane, covering both traditional and current strategies, and the benefits and limitations of each.

Transition-Metal-Catalyzed C-H Bond Activation for the Formation of C-C Bonds in Complex Molecules

Site-predictable and chemoselective C-H bond functionalization reactions offer synthetically powerful strategies for the step-economic diversification of both feedstock and fine chemicals. Many transition-metal-catalyzed methods have emerged for the selective activation and functionalization of C-H bonds. However, challenges of regio- and chemoselectivity have emerged with application to highly complex molecules bearing significant functional group density and diversity. As molecular complexity increases within molecular structures the risks of catalyst intolerance and limited applicability grow with the number of functional groups and potentially Lewis basic heteroatoms. Given the abundance of C-H bonds within highly complex and already diversified molecules such as pharmaceuticals, natural products, and materials, design and selection of reaction conditions and tolerant catalysts has proved critical for successful direct functionalization. As such, innovations within transition-metal-catalyzed C-H bond functionalization for the direct formation of carbon-carbon bonds have been discovered and developed to overcome these challenges and limitations. This review highlights progress made for the direct metal-catalyzed C-C bond forming reactions including alkylation, methylation, arylation, and olefination of C-H bonds within complex targets.

Palladium-Catalyzed Oxidative Amination of Unactivated Olefins with Primary Aliphatic Amines

Direct coupling of unactivated olefins with primary alkylamines is considered to be an efficient but unknown method for the construction of complex amines. Herein we report a catalytic intermolecular oxidative amination of unactivated olefins with primary aliphatic amines based on the combination of a palladium catalyst, a bidentate phosphine ligand, and duroquinone. A range of secondary allylic amines were obtained in good yields with excellent regio- and stereoselectivity. Mechanistic control experiments revealed that the reaction proceeds by allylic C(sp³)-H activation and nucleophilic amination. The utility of the protocol is further demonstrated with the late-stage modification and streamlined synthesis of drug molecules.

Simple Ether-Directed Enantioselective C(sp3 )-H Borylation of Cyclopropanes Enabled by Iridium Catalysis

Reported here is an efficient and simple ether-directed iridium-catalyzed enantioselective C(sp³ )-H borylation of cyclopropanes. Various functional groups were well-tolerated, affording a vast array of chiral cyclopropanes with high enantioselectivities. We also demonstrated that the turnover numbers of the current reaction could be up to 335.

Cobalt-Catalyzed Diastereo- and Enantioselective Carbon-Carbon Bond Forming Reactions of Cyclobutenes

Catalytic enantioselective functionalization of cyclobutenes constitutes a general and modular strategy for construction of enantioenriched complex cyclobutanes bearing multiple stereogenic centers, as chiral four-membered rings are common motifs in biologically active molecules and versatile intermediates in organic synthesis. However, enantioselective synthesis of cyclobutanes through such a strategy remained significantly limited. Herein, we report a series of unprecedented cobalt-catalyzed carbon-carbon bond forming reactions of cyclobutenes that are initiated through enantioselective carbometalation. The protocols feature diastereo- and enantioselective introduction of allyl, alkynyl, and functionalized alkyl groups. Mechanistic studies indicated an unusual 1,3-cobalt migration and subsequent β-carbon elimination cascade process occurred in the allyl addition. These new discoveries established a new elementary process for cobalt catalysis and an extension of diversity of nucleophiles for enantioselective transformations of cyclobutenes.

Site- and Stereoselective C(sp3 )-H Borylation of Strained (Hetero)Cycloalkanols Enabled by Iridium Catalysis

Transition metal-catalyzed site- and stereoselective C-H activation of strained (hetero)cycloalkanes remains a formidable challenge. We herein report a carbamate-directed iridium-catalyzed asymmetric β-C(sp³ )-H borylation of cyclopropanol derivatives. A variety of densely functionalized cyclopropanols were obtained in good enantioselectivities via desymmetrization and kinetic resolution. In addition, site-selective C(sp³ )-H borylation of methine groups furnished α-borylated (hetero)cycloalkanols in moderate to good yields. The synthetic utility of the method was further shown in a gram-scale synthesis and diverse downstream transformations of borylated products.

Asymmetric intermolecular allylic C-H amination of alkenes with aliphatic amines

Aliphatic allylic amines are found in a great variety of complex and biorelevant molecules. The direct allylic C-H amination of alkenes serves as the most straightforward method toward these motifs. However, use of widely available internal alkenes with aliphatic amines in this transformation remains a synthetic challenge. In particular, palladium catalysis faces the twin challenges of inefficient coordination of Pd(II) to internal alkenes but excessively tight and therefore inhibitory coordination of Pd(II) by basic aliphatic amines. We report a general solution to these problems. The developed protocol, in contrast to a classical Pd(II/0) scenario, operates through a blue light-induced Pd(0/I/II) manifold with mild aryl bromide oxidant. This open-shell approach also enables enantio- and diastereoselective allylic C-H amination.

Regioselective α-Cyanation of Unprotected Alicyclic Amines

Secondary alicyclic amines are converted to α-aminonitriles via addition of TMSCN to their corresponding imines, intermediates that are produced in situ via the oxidation of amine-derived lithium amides with simple ketone oxidants. Amines with an existing α-substituent undergo regioselective α'-cyanation even if the C-H bonds at that site are less activated. Amine α-arylation can be combined with α'-cyanation to generate difunctionalized products in a single operation.