Voltage-Gated Membranes Incorporating Cucurbit[n]uril Molecular Containers for Molecular Nanofiltration

Photocatalytically self-cleaning graphene oxide nanofiltration membranes reinforced with bismuth oxybromide for high-performance water purification

Graphene oxide (GO) membranes have emerged as promising candidates for water purification applications, owing to their unique physicochemical attributes. Nevertheless, the trade-off between permeability and selectivity, coupled with their vulnerability to membrane fouling, poses significant challenges to their widespread industrial deployment. In this study, we introduce an innovative in-situ growth and layer-by-layer assembly technique for fabricating multilayer GO membranes reinforced with bismuth oxybromide (BiOBr) on commonly employed Nylon substrates. This method allows for the creation of two-dimensional lamellar membranes capable of photocatalytic self-cleaning and tunable nanochannel dimensions. The synthesized GO/BiOBr composite membranes exhibit remarkable water permeance rates (approximately 493.9 LMH/bar) and high molecular rejection efficiency (>99 % for Victoria Blue B and Congo Red dyes). Notably, these membranes showcase an enhanced photocatalytic self-cleaning performance upon exposure to visible light. Our work provides a viable route for the fabrication of functionalized GO-based nanofiltration membranes with BiOBr inclusions, offering a synergistic combination of high water permeability, modifiable nanochannels, and effective self-cleaning capabilities through photocatalysis.

Alcohol-gating femtosecond laser-induced micro/nano-structured membranes with reversible switching wettability and breathability

A reversible liquid gating membrane with the ability to regulate gas/liquid transport is critical for many fields, such as biological applications, multiphase separation, and sewerage treatment. Numerous membranes can respond to external stimuli and dynamically control gas/liquid fluid transport; however, simultaneously achieving regulated gas/liquid transport membranes through simple manufacturing remains a challenge. In this work, we investigated an alcohol-regulation gating membrane via femtosecond laser one-step processing, allowing in situ dynamically controllable gas/liquid transfer. More specifically, the porous membrane, processed by laser, exhibits excellent superhydrophobicity (WCA ∼ 153.4°) and breathability (water-vapor evaporation rates ∼118.3 mg (cm2 h)-1), enabling gas to penetrate but not water. In contrast, it allows the passage of water while preventing the permeation of gas subsequent to the introduction of alcohol. Furthermore, the porous membrane still possesses superbly consistent performance after being placed in air for 90 days or over 100 dropping-drying ethanol cycles test, indicating outstanding durability and reversibility. Significantly, the porous membrane has broad potential applications in medical dressings, providing a new strategy to fabricate next-generation bandages.

Smart membranes for separation and sensing

Self-assembled membranes are extensively applied across various fields due to their non-thermal and low-carbon footprint characteristics. Recently, smart membranes with stimuli responsiveness have garnered significant attention for their ability to alter physical and chemical properties in response to different stimuli, leading to enhanced performance and a wider range of applications compared to traditional membranes. This review highlights the recent advancements in self-assembled smart membranes, beginning with widely used membrane preparation strategies such as interfacial polymerization and blending. Then it delves into the primary types of stimuli-responses, including light, pH, and temperature, illustrated in detail with relevant examples. Additionally, the review explores the latest progress in the use of smart membranes for separation and sensing, addressing the challenges and opportunities in both fields. This review offers new insights into the design of novel smart membrane platforms for sustainable development and provides a broader perspective on their commercial potential.

Reconstructing Electrically Conductive Nanofiltration Membranes with an Aniline-Functionalized Carbon Nanotubes Interlayer for Highly Effective Toxic Organic Treatment

Conductive nanofiltration (CNF) membranes hold great promise for removing small organic pollutants from water through enhanced Donnan exclusion and electrocatalytic degradation. However, current CNF membranes face limitations in conductivity, structural stability, and nanochannel control strategies. This work addresses these challenges by introducing aniline-functionalized carbon nanotubes (NH2-CNTs) as an interlayer. NH2-CNTs enhance the dispersibility and adhesion of pristine carbon nanotubes, leading to a more conductive and stable composite nanofiltration membrane. The redesigned NH2-CNTs interlayered conductive nanofiltration (NICNF) membrane exhibits a 10-fold increase in conductivity and a high response degree (80%) with excellent cyclic stability, surpassing existing CNF membranes. The synergistic effects of enhanced Donnan exclusion, voltage switching, and electrocatalysis enable the NICNF membrane to achieve selective recovery of mixed dyes, 98.97% removal of residual wastewater toxicity, and a 5.2-fold increase in permeance compared to the commercial NF270 membrane. This research paves the way for next-generation multifunctional membranes capable of the efficient recovery and degradation of toxic organic pollutants in wastewater.

Narrow Bandgap 1D Lead Iodide Perovskite with Aminophenyl Viologen

One-dimensional (1D) perovskites (perovskitoids) occupy an important place among modern semiconducting materials, offering design flexibility together with a wide range of properties. However, most such materials have a large bandgap, which limits their application in photovoltaics. Here, we present a new 1D hybrid perovskite containing the functional cation aminophenyl viologen (APhV). Similar to other materials from the viologen perovskite family, aminophenyl viologen iodidoplumbate(II) (APhV[Pb2I6]·2NMP) exhibits a broad absorption with a narrow and direct bandgap of 1.66 eV, which was calculated from the experimental data and is supported also by our first-principles simulations. Close contact between electron-rich inorganic chains and electron-accepting viologen molecules suggests charge transfer within the hybrid, which is also visible in the density of states. Considering its reasonable thermal stability, aminophenyl viologen iodidoplumbate can find a wide application in photovoltaics.

Conductive nanofiltration membranes via in situ PEDOT-polymerization for electro-assisted membrane fouling mitigation

Nanofiltration (NF) membranes play a pivotal role in water treatment; however, the persistent challenge of membrane fouling hampers their stable application. This study introduces a novel approach to address this issue through the creation of a poly(3,4-ethylenedioxythiophene) (PEDOT)-based conductive membrane, achieved by synergistically coupling interfacial polymerization (IP) with in situ self-polymerization of EDOT. During the IP reaction, the concurrent generation of HCl triggers the protonation of EDOT, activating its self-polymerization into PEDOT. This interwoven structure integrates with the polyamide network to establish a stable selective layer, yielding a remarkable 90 % increase in permeability to 20.4 L m-2 h-1 bar-1. Leveraging the conductivity conferred by PEDOT doping, an electro-assisted cleaning strategy is devised, rapidly restoring the flux to 98.3 % within 5 min, outperforming the 30-minute pure water cleaning approach. Through simulations in an 8040 spiral-wound module and the utilization of the permeated salt solution for cleaning, the electro-assisted cleaning strategy emerges as an eco-friendly solution, significantly reducing water consumption and incurring only a marginal electricity cost of 0.055 $ per day. This work presents an innovative avenue for constructing conductive membranes and introduces an efficient and cost-effective electro-assisted cleaning strategy to effectively combat membrane fouling.

Redox-Active Ferrocene Quencher-Based Supramolecular Nanomedicine for NIR-II Fluorescence-Monitored Chemodynamic Therapy

Real-time monitoring of hydroxyl radical (⋅OH) generation is crucial for both the efficacy and safety of chemodynamic therapy (CDT). Although ⋅OH probe-integrated CDT agents can track ⋅OH production by themselves, they often require complicated synthetic procedures and suffer from self-consumption of ⋅OH. Here, we report the facile fabrication of a self-monitored chemodynamic agent (denoted as Fc-CD-AuNCs) by incorporating ferrocene (Fc) into β-cyclodextrin (CD)-functionalized gold nanoclusters (AuNCs) via host-guest molecular recognition. The water-soluble CD served not only as a capping agent to protect AuNCs but also as a macrocyclic host to encapsulate and solubilize hydrophobic Fc guest with high Fenton reactivity for in vivo CDT applications. Importantly, the encapsulated Fc inside CD possessed strong electron-donating ability to effectively quench the second near-infrared (NIR-II) fluorescence of AuNCs through photoinduced electron transfer. After internalization of Fc-CD-AuNCs by cancer cells, Fenton reaction between redox-active Fc quencher and endogenous hydrogen peroxide (H2 O2 ) caused Fc oxidation and subsequent NIR-II fluorescence recovery, which was accompanied by the formation of cytotoxic ⋅OH and therefore allowed Fc-CD-AuNCs to in situ self-report ⋅OH generation without undesired ⋅OH consumption. Such a NIR-II fluorescence-monitored CDT enabled the use of renal-clearable Fc-CD-AuNCs for efficient tumor growth inhibition with minimal side effects in vivo.

New directions on membranes for removal and degradation of emerging pollutants in aqueous systems

Emerging pollutants (EPs) refer to a group of non-regulated chemical or biological substances that have been recently introduced or detected in the environment. These pollutants tend to exhibit resistance to conventional treatment methods and can persist in the environment for prolonged periods, posing potential adverse effects on ecosystems and human health. As we enter a new era of managing these pollutants, membrane-based technologies hold significant promise in mitigating impact of EPs on the environment and safeguarding human health due to their high selectivity, efficiency, cost-effectiveness and capability for simultaneous separation and degradation. Moreover, these technologies continue to evolve rapidly with the development of new membrane materials and functionalities, advanced treatment strategies, and analyses for effectively treating EPs of more recent concerns. The objective of this review is to present the latest directions and advancements in membrane-based technologies for addressing EPs. By highlighting the progress in this field, we aim to share valuable perspectives with researchers and contribute to the development of future directions in sustainable treatments for EPs.

Polyester Nanofiltration Membranes for Efficient Cations Separation

Polyester nanofiltration membranes highlight beneficial chlorine resistance, but their loose structures and negative charge result in poor cations retention precluding advanced use in cations separation. This work designs a new monomer (TET) containing "hydroxyl-ammonium" entities that confer dense structures and positive charge to polyester nanofiltration membranes. The TET monomer undergoes efficient interfacial polymerization with the trimesoyl chloride (TMC) monomer, and the resultant TET-TMC membranes feature one of the lowest molecular weight cut-offs (389 Da) and the highest zeta potential (4 mv, pH: 7) among all polyester nanofiltration membranes. The MgCl2 rejection of the TET-TMC membrane is 95.5%, significantly higher than state-of-the-art polyester nanofiltration membranes (<50%). The Li+ /Mg2+ separation performance of TET-TMC membrane is on par with cutting-edge polyamide membranes, while additionally, the membrane is stable against NaClO though polyamide membranes readily degrade. Thus the TET-TMC is the first polyester nanofiltration membrane for efficient cations separation.

Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Locking Patterned Carbon Nanotube Cages by Nanofibrous Mats to Construct Cucurbituril[n]-Based Ultrapermselective Dye/Salt Separation Membranes

Surface patterning is a promising strategy to overcome the trade-off effect of separation membranes. Herein, a bottom-up patterning strategy of locking micron-sized carbon nanotube cages (CNCs) onto a nanofibrous substrate is developed. The strongly enhanced capillary force triggered by the abundant narrow channels in CNCs endows the precisely patterned substrate with excellent wettability and antigravity water transport. Both are crucial for the preloading of cucurbit[n]uril (CB6)-embeded amine solution to form an ultrathin (∼20 nm) polyamide selective layer clinging to CNCs-patterned substrate. The CNCs-patterning and CB6 modification result in a 40.2% increased transmission area, a reduced thickness, and a lowered cross-linking degree of selective layer, leading to a high water permeability of 124.9 L·m^-2 h^-1 bar^-1 and a rejection of 99.9% for Janus Green B (511.07 Da), an order of magnitude higher than that of commercial membranes. The new patterning strategy provides technical and theoretical guidance for designing next-generation dye/salt separation membranes.

Engineering solid nanochannels with macrocyclic host-guest chemistry for stimuli responses and molecular separations

Biological channels in the cell membrane play a critical role in the regulation of signal transduction and transmembrane transport. Researchers have been committed to building biomimetic nanochannels to imitate the above significant biological processes. Unlike the fragile feature of biological channels, numerous solid nanochannels have aroused extensive interests for their controllable chemical properties on the surface and superior mechanical properties. Surface functionalization has been confirmed to be vital to determine the properties of solid nanochannels. Macrocyclic hosts (e.g., the crown ethers, cyclodextrins, calix[n]arenes, cucurbit[n]urils, pillar[n]arenes, and trianglamine) can be tailored to the interior surface of the nanochannels with the performance of stimuli response and separation. Macrocycles have good reversibility and high selectivity toward specific ions or molecules, promoting functionalies of solid nanochannels. Hence, the combination of macrocyclic hosts and solid nanochannels is conducive to taking both advantages and achieving applications in functional nanochannels (e.g., membranes separations, biosensors, and smart devices). In this review, the most recent advances in nanochannel membranes decorated by macrocyclic host-guest chemistry are briefed. A variety of macrocyclic hosts-based responsive nanochannels are organized (e.g., the physical stimuli and specific molecules or ions stimuli) and nanochannels are separated (e.g., water purifications, enantimerseparations, and organic solvent nanofiltration), respectively. Hopefully, this review can enlighten on how to effectively build functional nanochannels and facilitate their practical applications in membrane separations.

Highly Efficient Production of Nanoporous Block Copolymers with Arbitrary Structural Characteristics for Advanced Membranes

The great significance of boosting the design of percolating nanopore structures in block copolymers (BCPs) for various cases has been widely demonstrated in the past several decades. However, it still remains challenging to prepare the desired porous structures in a rapid, facile, and universal manner. Here we have developed an unconventional and benchtop strategy to rapidly generate the nanoporous polystyrene-based BCPs with arbitrary structural characteristics regardless of the BCP bulk morphology. This universal pore-forming strategy enables the sustainable CO2 -based BCPs to form advanced membranes after 1 s soaking for efficiently rejecting 94.2 % brilliant blue R (826 g mol-1 ). Meanwhile, the water permeance retains around 1020 L (m2  h bar)-1 , which is 1-3 orders of magnitude higher than that of other membranes. This strategy may offer an excellent opportunity to introduce percolating pore structures in those newly developed BCPs with which the previously reported pore-forming methods may not deal.

Metal-Polyphenol Coordination at the Aqueous Contra-diffusion "Interface": A Green Way to High-Performance Iron(III)/Tannic Acid Thin-Film-Composite Nanofiltration Membranes

Thin-film-composite (TFC) nanofiltration membranes have found wide uses in environment remediation and industrial separation. There is a growing trend to avoid the use of organic solvents and toxic chemicals during membrane fabrication. Therefore, the aqueous fabrication of TFC membranes receives considerable interest as a green and sustainable process. However, it remains challenging to construct a defect-free and ultrathin film in a homogeneous aqueous phase without the assistance of an interface. The contra-diffusion process provides a special "interface" to confine the film formation within a narrow space by regulating the competition between precursor diffusion and interfacial reactions. Herein, Fe³⁺/tannic acid (TA) TFC membranes were fabricated by a contra-diffusion process. The effects of fabrication parameters on the Fe³⁺/TA TFC membrane microstructure and performance were also investigated. The negatively charged membrane performs a competitive Na₂SO₄ rejection of 95.6% with a permeation flux of 44.3 L m^-2 h^-1 under 0.6 MPa as well as more than 99.5% rejection to several anionic dyes. The as-prepared membranes perform superior nanofiltration performance compared to other reported Fe³⁺/TA-based membranes, owing to the thin and defect-free selective layers by self-regulation. Moreover, the membranes exhibit stable rejection during a long-term nanofiltration test.

Chemical Mechanism-Dominated and Reporter-Tunable Surface-Enhanced Raman Scattering via Directional Supramolecular Assembly

Molecular resonance can be strengthened by charge transfer, profiting chemical mechanism (CM)-related surface-enhanced Raman scattering (SERS). Herein a supramolecular assembly enabled SERS system is established by functionalizing para-sulfonatocalix[4]arene (pSC₄) onto Au₃Cu nanocrystals (NCs). Due to the cooperation of Au and Cu, pSC₄ is directionally assembled on the surface of Au₃Cu NCs via van der Waals force, enabling photoinduced and hydrogen bond-induced charge transfer, which remarkably enhances the Raman scattering of methylene blue (MB) captured by pSC₄. In particular, for the C-N and C-C stretching of MB, the contributions of resonance Raman scattering increase up to 80%. In addition, the SERS system is able to display affinities of different host-guest interactions, and further employed to evaluate effects of drugs for Alzheimer's disease. In this work, charge transfer is realized by performing supramolecular assembly on the surface of plasmonic nanomaterials, providing an avenue to design CM-related and reporter-tunable SERS systems.

Removing miscellaneous heavy metals by all-in-one ion exchange-nanofiltration membrane

The composition of wastewater containing heavy metal mixtures is often complex and poses a serious threat to human and environmental health. Effective removal of a variety of heavy metal ions with a single technology is challenging, and the conventional split integrated technologies require multi-step processing and a massive footprint. For the first time, we achieve hierarchically integrating ion exchange and nanofiltration into all-in-one "iNF" membranes. The iNF membrane has a hierarchical structure with an interfacial polymerization layer and an ion exchange layer, which can achieve highly efficient indiscriminate heavy metal ion removal, overcoming the defect that traditional nanofiltration membranes can only remove single metal cations or oxyanions. The ion exchange layer can remove heavy metal ions through sulfonic acid groups and quaternary amine groups. In addition, the ion exchange layer can be regenerated by electro-deionization, which is meaningful for sustainable membrane usage. This facile, scalable, and compact integrated process shows outstanding potential and universal applicability in complex wastewater treatment.