π-Extended Ligands in Two-Coordinate Coinage Metal Complexes

Efficient photoredox catalysis in C-C cross-coupling reactions by two-coordinated Au(I) complex

Photocatalysis provides a versatile approach to redox activation of various organic substrates for synthetic applications. To broaden the scope of photoredox catalysis, developing catalysts with strong oxidizing or reducing power in the excited state is imperative. Catalysts that feature highly cathodic oxidation potentials and long lifetimes in their excited states are particularly in demand. In this research, we demonstrate the catalytic utility of two-coordinate Au(I) complex photocatalysts that exhibit an exclusive ligand-to-ligand charge-transfer (LLCT) transition in C-C cross-coupling reactions between N-heterocycles and (hetero)aryl halides, including redox-resistant (hetero)aryl chlorides. Our photocatalysis system can steer reactions under visible-light irradiation at a catalyst loading as low as 0.1 mol% and exhibits a broad substrate scope with high chemo- and regioselectivity. Our mechanistic investigations provide direct spectroscopic evidence for each step in the catalysis cycle and demonstrate that the LLCT-active Au(I) complex catalysts offer several benefits, including strong visible-light absorption, a 210 ns-long excited-state lifetime without short-lived components, and a 91% yield in the production of free-radical intermediates. Given the wide structural versatility of the proposed catalysts, we envision that our research will provide useful insights into the future utilization of the LLCT-active Au(I) complex for organic transformations.

Luminescent carbene-copper(i)-amide polymers for efficient host-free solution-processed OLEDs

Luminescent metallopolymers have attracted broad interest in the fields of healthcare and organic electronics. However, polymeric emitters based on earth-abundant metal complexes are scarce. Here, two series of Cu(i) polymers, PMAC-x and PCAAC-x (x = 1-3) have been developed using two kinds of Cu(i)-based carbene-metal-amide (CMA) complexes as side-chain emitter units to combine with a nonconjugated polystyrene backbone. These Cu(i) polymers emit via distinct thermally activated delayed fluorescence or dominant phosphorescence, inherited from the grafted Cu(i)-based CMA units. Particularly, the PMAC-x polymers exhibit high photoluminescence quantum efficiencies of up to 0.78, short emission lifetimes of down to 0.66 μs, and fast radiative rates of up to 106 s-1 in neat films. Thanks to the good encapsulation effect of the polystyrene backbone, these Cu(i) polymers not only demonstrate favorable moisture stability but also show significant aggregation-induced emission. The resultant host-free solution-processed organic light-emitting diodes (OLEDs) achieve outstanding electroluminescence performance with a record external quantum efficiency of 13.8% at a practical luminance of ∼100 nits, representing state-of-the-art device efficiency for metallopolymer-based OLEDs. This work not only presents the first example of CMA polymers but also provides the future direction of polymeric emitters from earth-abundant metal complexes for the OLED application.

Simultaneous Thermally Stimulated Delayed Phosphorescence (TSDP) and Thermally Activated Delayed Fluorescence (TADF) in a Two-Coordinated Au(I) Bimetallic Complex Featuring a Tandem Carbene Structure

A bimetallic, two-coordinated carbene-metal-amine (cMa) Au(I) complex featuring a twisted tandem carbene structure (NHC1-Au-NHC2-Au-carbazolyl) was synthesized. The molecular structure in single crystals revealed a large dihedral angle between the two carbene ligands, while the bridged carbene NHC2 and carbazolyl (Cz) ligands were coplanar. A bluish green thermally stimulated delayed phosphorescence (TSDP) was observed in crystals with an emission lifetime over 70 μs, which can be attributed to the spin allowed diabatic population of a high-lying emissive triplet state from the 3LE characterized low-lying ones. The small rotation energy barrier of Cz along the coordination bond allowed conformers with large dihedral angles between NHC2 and Cz. The ICT characterized S1 state was consequently stabilized to achieve a thermally accessible energy gap to facilitate ISC between triplets and the S1, leading to the thermally activated delayed fluorescence (TADF). Simultaneous TSDP and TADF dual emission can be recorded in its doped polymer film owing to the coexistence of these different conformers.

Deep-Blue and Fast Delayed Fluorescence from Carbene-Metal-Amides for Highly Efficient and Stable Organic Light-Emitting Diodes

Linear gold complexes of the "carbene-metal-amide" (CMA) type are prepared with a rigid benzoguanidine amide donor and various carbene ligands. These complexes emit in the deep-blue range at 424 and 466 nm with 100% quantum yields in all media. The deep-blue thermally activates delayed fluorescence originates from a charge transfer state with an excited state lifetime as low as 213 ns, resulting in fast radiative rates of 4.7 × 106 s-1. The high thermal and photo-stability of these carbene-metal-amide (CMA) materials enabled the authors to fabricate highly energy-efficient organic light-emitting diodes (OLED) in host-guest architectures. Deep-blue OLED devices with electroluminescence at 416 and 457 nm with practical external quantum efficiencies of up to 23% at 100 cd m-2 with excellent color coordinates CIE (x; y) = 0.16; 0.07 and 0.17; 0.18 are reported. The operating stability of these OLEDs is the longest reported to date (LT50 = 1 h) for deep-blue CMA emitters, indicating a high promise for further development of blue OLED devices. These findings inform the molecular design strategy and correlation between delayed luminescence with high radiative rates and CMA OLED device operating stability.

Efficient Blue Photo- and Electroluminescence from CF3-Decorated Cu(I) Complexes

Luminescent organometallic complexes of earth-abundant copper(I) have long been studied in organic light-emitting diodes (OLED). Particularly, Cu(I)-based carbene-metal-amide (CMA) complexes have recently emerged as promising organometallic emitters. However, blue-emitting Cu(I) CMA complexes have been rarely reported. Here we constructed two blue-emitting Cu(I) CMA emitters, MAC*-Cu-CF3Cz and MAC*-Cu-2CF3Cz, by introducing one or two CF3 substitutes into carbazole ligands. Both complexes exhibited high thermal stability and blue emission colors. Moreover, two complexes exhibited different emission origins rooting from different donor ligands: a distinct thermally activated delayed fluorescence (TADF) from ligand-to-ligand charge transfer excited states for MAC*-Cu-CF3Cz or a dominant phosphorescence nature from local triplet excited state of the carbazole ligand for MAC*-Cu-2CF3Cz. Inspiringly, MAC*-Cu-CF3Cz had high photoluminescence quantum yields of up to 94 % and short emission lifetimes of down to 1.2 μs in doped films, accompanied by relatively high radiative rates in the 105 s-1 order. The resultant vacuum-deposited OLEDs based on MAC*-Cu-CF3Cz delivered pure-blue electroluminescence at 462 nm together with a high external quantum efficiency of 13.0 %.

Intra- and Intermolecular Charge-Transfer Dynamics of Carbene-Metal-Amide Photosensitizers

A series of steady-state and time-resolved spectroscopies were performed on a set of eight carbene-metal-amide (cMa) complexes, where M = Cu and Au, that have been used as photosensitizers for photosensitized electrocatalytic reactions. Using ps-to-ns and ns-to-ms transient absorption spectroscopies (psTA and nsTA, respectively), the excited-state kinetics from light absorption, intersystem crossing (ISC), and eventually intermolecular charge transfer were thoroughly characterized. Using time-correlated single photon counting (TCSPC) and psTA with a thermally activated delayed fluorescence (TADF) model, the variation in intersystem crossing (ISC), (S1 → T1) rates (∼3-120 × 109 s-1), and ΔEST values (73-115 meV) for these compounds were fully characterized, reflecting systematic changes to the carbene, carbazole, and metal. The psTA additionally revealed an early time relaxation (rate ∼0.2-0.8 × 1012 s-1) attributed to solvent relaxation and vibrational cooling. The nsTA experiments for a gold-based cMa complex demonstrated efficient intermolecular charge transfer from the excited cMa to an electron acceptor. Pulse radiolysis and bulk electrolysis experiments allowed us to identify the character of the transient excited states as ligand-ligand charge transfer as well as the spectroscopic signature of oxidized and reduced forms of the cMa photosensitizer.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

Structural Control of Highly Efficient Thermally Activated Delayed Fluorescence in Carbene Zinc(II) Dithiolates

Luminescent metal complexes based on earth abundant elements are a valuable target to substitute 4d/5d transition metal complexes as triplet emitters in advanced photonic applications. Whereas CuI complexes have been thoroughly investigated in the last two decades for this purpose, no structure-property-relationships for efficient luminescence involving triplet excited states from ZnII complexes are established. Herein, we report on the design of monomeric carbene zinc(II) dithiolates (CZT) featuring a donor-acceptor-motif that leads to highly efficient thermally activated delayed fluorescence (TADF) with for ZnII compounds unprecedented radiative rate constants kTADF =1.2×106  s-1 at 297 K. Our high-level DFT/MRCI calculations revealed that the relative orientation of the ligands involved in the ligand-to-ligand charge transfer (1/3 LLCT) states is paramount to control the TADF process. Specifically, a dihedral angle of 36-40° leads to very efficient reverse intersystem-crossing (rISC) on the order of 109  s-1 due to spin-orbit coupling (SOC) mediated by the sulfur atoms in combination with a small ΔES1-T1 of ca. 56 meV.

Achieving Long-Wavelength Electroluminescence Using Two-Coordinate Gold(I) Complexes: Overcoming the Energy Gap Law

Two-coordinate coinage metal complexes have emerged as promising emitters for highly efficient organic light-emitting devices (OLEDs). However, achieving efficient long-wavelength electroluminescence emission from these complexes remains as a daunting challenge. To address this challenge, molecular design strategies aimed at bolstering the photoluminescence quantum yield (Φ) of Au(I) complex emitters in low-energy emission regions are investigated. By varying amido ligands, a series of two-coordinate Au(I) complexes is developed that exhibit photoluminescence peak wavelengths over a broad range of 533-750 nm. These complexes, in particular, maintain Φ values up to 10% even in the near-infrared emission region, overcoming the constraints imposed by an energy gap. Quantum chemical calculations and photophysical analyses reveal the action of radiative control, which serves to overcome the energy gap law, becomes more pronounced as the overlap between hole and electron distributions (Sr (r)) in the excited state increases. It is further elucidated that Sr (r) increases with the distance between the hole-distribution centroid and the nitrogen atom in an amido ligand. Finally, multilayer OLEDs involving the Au(I) complex emitters exhibit performances beyond the borderline of the electroluminescence wavelength-external quantum efficiency space set by previous devices of coinage metal complexes.

Ligand-Centered Photocatalytic Hydrogen Production in an Axially Capped Rh2(II,II) Paddlewheel Complex with Red Light

A new series of Rh2(II,II) complexes with the formula cis-[Rh2(DTolF)2(bpnp)(L)]2+, where bpnp = 2,7-bis(2-pyridyl)-1,8-naphthyridine, DTolF = N,N'-di(p-tolyl) formamidinate, and L = pdz (pyridazine; 2), cinn (cinnoline; 3), and bncn (benzo[c]cinnoline; 4), were synthesized from the precursor cis-[Rh2(DTolF)2(bpnp)(CH3CN)2]2+ (1). The first reduction couple in 2-4 is localized on the bpnp ligand at approximately -0.52 V vs Ag/AgCl in CH3CN (0.1 M TBAPF6), followed by reduction of the corresponding diazine ligand. Complex 1 exhibits a Rh2(δ*)/DTolF → bpnp(π*) metal/ligand-to-ligand charge-transfer (1ML-LCT) absorption with a maximum at 767 nm (ε = 1800 M-1 cm-1). This transition is also present in the spectra of 2-4, overlaid with the Rh2(δ*)/DTolF → L(π*) 1ML-LCT bands at 516 nm in 2 (L = pdz), 640 nm in 3 (L = cinn), and 721 nm in 4 (L = bncn). Complexes 2 and 3 exhibit Rh2(δ*)/DTolF → bpnp 3ML-LCT excited states with lifetimes, τ, of 3 and 5 ns, respectively, in CH3CN, whereas the lowest energy 3ML-LCT state in 4 is Rh2(δ*)/DTolF → bncn in nature with τ = 1 ns. Irradiation of 4 with 670 nm light in DMF in the presence of 0.1 M TsOH (p-toluene sulfonic acid) and 30 mM BNAH (1-benzyl-1,4-dihydronicotinamide) results in the production of H2 with a turnover number (TON) of 16 over 24 h. The axial capping of the Rh2(II,II) bimetallic core with the bpnp ligand prevents the formation of an Rh-H hydride intermediate. These results show that the observed photocatalytic reactivity is localized on the bncn ligand, representing the first example of ligand-centered H2 production.

A Rising Star: Luminescent Carbene-Metal-Amide Complexes

Coinage metal (gold, silver, and copper) complexes are attractive candidates to substitute the widely studied noble metal complexes, such as, iridium(III) and platinum(II), as luminescent materials in organic light-emitting diodes (OLEDs). However, the development of coinage metal complexes exhibiting high emission quantum yields and short exciton lifetimes is still a formidable challenge. In the past few years, coinage metal complexes featuring a carbene-metal-amide (CMA) motif have emerged as a new class of luminescent materials in OLEDs. Thanks to the coinage metal-bridged linear geometry, coplanar conformation, and the formation of excited states with dominant ligand-to-ligand charge transfer character and reduced metal d-orbital participation, most CMA complexes have high radiative rates via thermally activated delayed fluorescence. Currently, the family of CMA complexes have rapidly evolved and remarkable progresses in CMA-based OLEDs have been made. Here, a Concept article on CMA complexes is presented, with a focus on molecular design principles, the correlation between molecular structure/conformation and optoelectronic properties, as well as OLED performance. The future prospects of CMA complexes are also discussed.

Gold(I)-N-Heterocyclic Carbene Synthons in Organometallic Synthesis

The prominent role of gold-N-heterocyclic carbene (NHC) complexes in numerous research areas such as homogeneous (photo)catalysis, medicinal chemistry and materials science has prompted organometallic chemists to design gold-based synthons that permit access to target complexes through simple synthetic steps under mild conditions. In this review, the main gold-NHC synthons employed in organometallic synthesis are discussed. Mechanistic aspects involved in their synthesis and reactivity as well as applications of gold-NHC synthons as efficient pre-catalysts, antitumor agents and/or photo-emissive materials are presented.

Highly phosphorescent carbene-metal-carboranyl complexes of copper(I) and gold(I)

New phosphorescent "carbene-metal-carboranyl" (CMC) Cu(I) and Au(I) complexes based on the diamidocarbene (DAC) ligand show up to 68% photoluminescence quantum yield and microsecond range lifetimes. CMC organic light emitting diodes (OLEDs) emit sky-blue and warm white electroluminescence.

Luminescent Bimetallic Two-Coordinate Gold(I) Complexes Utilizing Janus Carbenes

A series of bimetallic carbene-metal-amide (cMa) complexes have been prepared with bridging biscarbene ligands to serve as a model for the design of luminescent materials with large oscillator strengths and small energy differences between the singlet and triplet states (ΔEST). The complexes have a general structure (R2N)Au(:carbene─carbene:)Au(NR2). The bimetallic complexes show solvation-dependent absorption and emission that is analyzed in detail. It is found that the molar absorptivity of the bimetallic complexes is correlated with the energy barrier to rotation of the metal-ligand bond. The bimetallic cMa complexes also exhibit short emission lifetimes (τ = 200-300 ns) with high photoluminescence efficiencies (ΦPL > 95%). The radiative rates of bimetallic cMa complexes are 3-4 times faster than that of the corresponding monometallic complexes. Analysis of temperature-dependent luminescence data indicates that the lifetime for the singlet state (τS1) of bimetallic cMa complexes is near 12 ns with a ΔEST of 40-50 meV. The presented compounds provide a general design for cMa complexes to achieve small values for ΔEST while retaining high radiative rates. Solution-processed organic light-emitting devices (OLEDs) made using two of the complexes as luminescent dopants show high efficiency and low roll-off at high luminance.

Organic thermally activated delayed fluorescence material with strained benzoguanidine donor

Organic thermally activated delayed fluorescence (TADF) materials have been widely investigated due to their impressive electronic properties and applied potential for the third generation of organic light-emitting diodes (OLED). We present organic TADF material (4BGIPN) based on the strained benzoguanidine donor and compare it with the benchmark carbazole-based material (4CzIPN). Extended π-conjugation in 4BGIPN material results in yellow-green luminescence at 512 nm with a fast radiative rate of 5.5 × 10-5 s-1 and a photoluminescence quantum yield of 46% in methylcyclohexane solution. Such a nitrogen-rich 4BGIPN material has a significantly stabilized highest occupied molecular orbital (HOMO) at -6.4 eV while the lowest unoccupied molecular orbital (LUMO) at -4.0 eV, indicating potential suitability for application as the electron transport layer or TADF class III emitter in OLEDs.

Type I Photosensitization with Strong Hydroxyl Radical Generation in NIR Dye Boosted by Vigorous Intramolecular Motions for Synergistic Therapy

Development of type I photosensitizers (PSs) with strong hydroxyl radical (· OH) formation is particularly important in the anaerobic tumor treatment. On the other hand, it is challenging to obtain an efficient solid-state intramolecular motion to promote the development of molecular machine and molecular motor. However, the relationship between them is never revealed. In this work, a pyrazine-based near-infrared type I PS with remarkable donor-acceptor effect is developed. Notably, the intramolecular motions are almost maximized by the combination of intramolecular and intermolecular engineering to simultaneously introduce the unlimited bond stretching vibration and boost the group rotation. The photothermal conversion caused by the intramolecular motions is realized with efficiency as high as 86.8%. The D-A conformation of PS can also induce a very small singlet-triplet splitting of 0.07 eV, which is crucial to promote the intersystem crossing for the triplet sensitization. Interestingly, its photosensitization is closely related to the intramolecular motions, and a vigorous motion may give rise to a strong · OH generation. In view of its excellent photosensitization and photothermal behavior, the biocompatible PS exhibits a superior imaging-guided cancer synergistic therapy. This work stimulates the development of advanced PS for the biomedical application and solid-state intramolecular motions.

Two-Coordinate Coinage Metal Complexes as Solar Photosensitizers

Generating sustainable fuel from sunlight plays an important role in meeting the energy demands of the modern age. Herein, we report two-coordinate carbene-metal-amide (cMa, M = Cu(I) and Au(I)) complexes that can be used as sensitizers to promote the light-driven reduction of water to hydrogen. The cMa complexes studied here absorb visible photons (ε_vis > 10³ M^-1 cm^-1), maintain long excited-state lifetimes (τ ∼ 0.2-1 μs), and perform stable photoinduced charge transfer to a target substrate with high photoreducing potential (E^+/* up to -2.33 V vs Fc^+/0 based on a Rehm-Weller analysis). We pair these coinage metal complexes with a cobalt-glyoxime electrocatalyst to photocatalytically generate hydrogen and compare the performance of the copper- and gold-based cMa complexes. We also find that the two-coordinate complexes herein can perform photodriven hydrogen production from water without the addition of the cobalt-glyoxime electrocatalyst. In this "catalyst-free" system, the cMa sensitizer partially decomposes to give metal nanoparticles that catalyze water reduction. This work identifies two-coordinate coinage metal complexes as promising abundant metal, solar fuel photosensitizers that offer exceptional tunability and photoredox properties.

Using azaacene as an acceptor unit to construct an ultraefficient red fluorophore with an EQE over 40

Azaacenes, which have been known for a long time, are of scientific and practical importance in organic electronics. Azaacenes once shone as the luminophore in organic light-emitting diodes (OLEDs). However, due to the low exciton utilization efficiency and/or the aggregation induced quenching (ACQ) effect, N-heteroacene based OLEDs generally showed inferior device performance. In this work, azaacene has been revisited and applied as an acceptor for a red fluorophore (AZA-TPA), where the judicious connection pattern between donor and acceptor maximized the harvest of singlet and triplet excitons, resulting in a high photoluminescence efficiency of 94.6% in doped films (3 wt%). In addition, the linearly-fused polycyclic structure contributed to a high horizontal emitting dipole ratio (Θ_‖ = 90%). As a result, an AZA-TPA-based OLED achieved an unprecedented external quantum efficiency of 41.30% at 610 nm. This work will pave a new path for the development of efficient N-heteroacene-based fluorophores.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.