Spectroscopic Investigations of [FeFe] Hydrogenase Maturated with [(57)Fe2(adt)(CN)2(CO)4](2-)

Facile electrocatalytic proton reduction by a [Fe-Fe]-hydrogenase bio-inspired synthetic model bearing a terminal CN- ligand

An azadithiolate bridged CN- bound pentacarbonyl bis-iron complex, mimicking the active site of [Fe-Fe] H2ase is synthesized. The geometric and electronic structure of this complex is elucidated using a combination of EXAFS analysis, infrared and Mössbauer spectroscopy and DFT calculations. The electrochemical investigations show that complex 1 effectively reduces H+ to H2 between pH 0-3 at diffusion-controlled rates (1011 M-1 s-1) i.e. 108 s-1 at pH 3 with an overpotential of 140 mV. Electrochemical analysis and DFT calculations suggests that a CN- ligand increases the pKa of the cluster enabling hydrogen production from its Fe(i)-Fe(0) state at pHs much higher and overpotential much lower than its precursor bis-iron hexacarbonyl model which is active in its Fe(0)-Fe(0) state. The formation of a terminal Fe-H species, evidenced by spectroelectrochemistry in organic solvent, via a rate determining proton coupled electron transfer step and protonation of the adjacent azadithiolate, lowers the kinetic barrier leading to diffusion controlled rates of H2 evolution. The stereo-electronic factors enhance its catalytic rate by 3 order of magnitude relative to a bis-iron hexacarbonyl precursor at the same pH and potential.

Fully Refined Semisynthesis of the [FeFe] Hydrogenase H-Cluster

[FeFe] hydrogenases contain a 6-Fe cofactor that serves as the active site for efficient redox interconversion between H2 and protons. The biosynthesis of the so-called H-cluster involves unusual enzymatic reactions that synthesize organometallic Fe complexes containing azadithiolate, CO, and CN- ligands. We have previously demonstrated that specific synthetic [Fe(CO)x(CN)y] complexes can be used to functionally replace proposed Fe intermediates in the maturation reaction. Here, we report the results from performing such cluster semisynthesis in the context of a recent fully defined cluster maturation procedure, which eliminates unknown components previously employed from Escherichia coli cell lysate and demonstrate this provides a concise route to H-cluster synthesis. We show that formaldehyde can be used as a simple reagent as the carbon source of the bridging adt ligand of H-cluster in lieu of serine/serine hydroxymethyltransferase. In addition to the actual H-cluster, we observe the formation of several H-cluster-like species, the identities of which are probed by cryogenic photolysis combined with EPR/ENDOR spectroscopy.

Cluster-selective 57Fe labeling of a Twitch-domain-containing radical SAM enzyme

57Fe-specific techniques such as Mössbauer spectroscopy are invaluable tools in mechanistic studies of Fe-S proteins. However, they remain underutilized for proteins that bind multiple Fe-S clusters because such proteins are typically uniformly enriched with 57Fe. As a result, it can be unclear which spectroscopic responses derive from which cluster, and this in turn obscures the chemistry that takes place at each cluster. Herein, we report a facile method for cluster-selective 57Fe enrichment based on exchange between the protein's Fe-S clusters and exogenous Fe ions. Through a combination of inductively coupled plasma mass spectrometric and 57Fe Mössbauer spectroscopic analysis, we show that, of the two [Fe4S4] clusters in BtrN (a Twitch-domain-containing radical S-adenosyl-l-methionine (SAM) enzyme), the Fe ions in the SAM-binding cluster undergo faster exchange with exogenous Fe2+; the auxiliary cluster is essentially inert under the reaction conditions. Exploiting this rate difference allows for either of the two [Fe4S4] clusters to be selectively labeled: the SAM-binding cluster can be labeled by exchanging unlabeled BtrN with 57Fe2+, or the auxiliary cluster can be labeled by exchanging fully labeled BtrN with natural abundance Fe2+. The labeling selectivity likely originates primarily from differences in the clusters' accessibility to small molecules, with secondary contributions from the different redox properties of the clusters. This method for cluster-selective isotopic labeling could in principle be applied to any protein that binds multiple Fe-S clusters so long as the clusters undergo exchange with exogenous Fe ions at sufficiently different rates.

Evidence of Atypical Structural Flexibility of the Active Site Surrounding of an [FeFe] Hydrogenase from Clostridium beijerinkii

[FeFe] hydrogenase from Clostridium beijerinkii (CbHydA1) is an unusual hydrogenase in that it can withstand prolonged exposure to O₂ by reversibly converting into an O₂-protected, inactive state (H_inact). It has been indicated in the past that an atypical conformation of the "SC₃₆₇CP" loop near the [2Fe]_H portion of the six-iron active site (H-cluster) allows the Cys367 residue to adopt an "off-H⁺-pathway" orientation, promoting a facile transition of the cofactor to H_inact. Here, we investigated the electronic structure of the H-cluster in the oxidized state (H_ox) that directly converts to H_inact under oxidizing conditions and the related CO-inhibited state (H_ox-CO). We demonstrate that both states exhibit two distinct forms in electron paramagnetic resonance (EPR) spectroscopy. The ratio between the two forms is pH-dependent but also sensitive to the buffer choice. Our IR and EPR analyses illustrate that the spectral heterogeneity is due to a perturbation of the coordination environment of the H-cluster's [4Fe4S]_H subcluster without affecting the [2Fe]_H subcluster. Overall, we conclude that the observation of two spectral components per state is evidence of heterogeneity of the environment of the H-cluster likely associated with conformational mobility of the SCCP loop. Such flexibility may allow Cys367 to switch rapidly between off- and on-H⁺-pathway rotamers. Consequently, we believe such structural mobility may be the key to maintaining high enzymatic activity while allowing a facile transition to the O₂-protected state.

A personal account on 25 years of scientific literature on [FeFe]-hydrogenase

[FeFe]-hydrogenases are gas-processing metalloenzymes that catalyze H₂ oxidation and proton reduction (H₂ release) in microorganisms. Their high turnover frequencies and lack of electrical overpotential in the hydrogen conversion reaction has inspired generations of biologists, chemists, and physicists to explore the inner workings of [FeFe]-hydrogenase. Here, we revisit 25 years of scientific literature on [FeFe]-hydrogenase and propose a personal account on 'must-read' research papers and review article that will allow interested scientists to follow the recent discussions on catalytic mechanism, O₂ sensitivity, and the in vivo synthesis of the active site cofactor with its biologically uncommon ligands carbon monoxide and cyanide. Focused on-but not restricted to-structural biology and molecular biophysics, we highlight future directions that may inspire young investigators to pursue a career in the exciting and competitive field of [FeFe]-hydrogenase research.

Europium-151 and iron-57 nuclear resonant vibrational spectroscopy of naturally abundant KEu(III)Fe(II)(CN)6 and Eu(III)Fe(III)(CN)6 complexes

We have performed and analyzed the first combined 151Eu and 57Fe nuclear resonant vibrational spectroscopy (NRVS) for naturally abundant KEu(III)[Fe(II)(CN)6] and Eu(III)[Fe(III)(CN)6] complexes. Comparison of the observed 151Eu vs.57Fe NRVS spectroscopic features confirms that Eu(III) in both KEu(III)[Fe(II)(CN)6] and Eu(III)[Fe(III)(CN)6] occupies a position outside the [Fe(CN)6] core and coordinates to the N atoms of the CN- ions, whereas Fe(III) or Fe(II) occupies the site inside the [Fe(CN)6]4- core and coordinates to the C atoms of the CN- ions. In addition to the spectroscopic interest, the results from this study provide invaluable insights for the design and evaluation of the nanoparticles of such complexes as potential cellular contrast agents for their use in magnetic resonance imaging. The combined 151Eu and 57Fe NRVS measurements are also among the first few explorations of bi-isotopic NRVS experiments.

Tracking energy scale variations from scan to scan in nuclear resonant vibrational spectroscopy: In situ correction using zero-energy position drifts ΔEi rather than making in situ calibration measurements

Nuclear resonant vibrational spectroscopy (NRVS) is an excellent modern vibrational spectroscopy, in particular, for revealing site-specific information inside complicated molecules, such as enzymes. There are two different concepts about the energy calibration for a beamline or a monochromator (including a high resolution monochromator): the absolute energy calibration and the practical energy calibration. While the former pursues an as-fine-as-possible and as-repeatable-as-possible result, the latter includes the environment influenced variation from scan to scan, which often needs an in situ calibration measurement to track. However, an in situ measurement often shares a weak beam intensity and therefore has a noisy NRVS spectrum at the calibration sample location, not leading to a better energy calibration/correction in most cases. NRVS users for a long time have noticed that there are energy drifts in the vibrational spectra's zero-energy positions from scan to scan (ΔE_i), but their trend has not been explored and utilized in the past. In this publication, after providing a brief introduction to the critical issue(s) in practical NRVS energy calibrations, we have evaluated the trend and the mechanism for these zero-energy drifts (ΔE_i) and explored their link to the energy scales (α_i) from scan to scan. Via detailed analyses, we have established a new stepwise procedure for carrying out practical energy calibrations, which includes the correction for the scan-dependent energy variations using ΔE_i values rather than running additional in situ calibration measurements. We also proved that one additional instrument-fixed scaling constant (α₀) exists to convert such "calibrated" energy axis (E') to the real energy axis (E_real). The "calibrated" real energy axis (E_real) has a preliminary error bar of ±0.1% (the 2σ_E divided by the vibrational energy position), which is 4-8 times better than that from the current practical energy calibration procedure.

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as "P₂N₂" ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P^R₂N^R'₂)₂]²⁺ complexes are electrocatalysts for both the oxidation and production of H₂. Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P^R₂N^R'₂)₂]²⁺ complexes for the oxidation and production of H₂, catalysts with diphosphine ligands containing pendant amines have also been demonstrated for several metals for many different reactions, both in solution and immobilized on surfaces. The impact of pendant amines in catalyst design continues to expand.

The oxygen-resistant [FeFe]-hydrogenase CbA5H harbors an unknown radical signal

[FeFe]-hydrogenases catalyze the reversible conversion of molecular hydrogen into protons and electrons with remarkable efficiency. However, their industrial applications are limited by their oxygen sensitivity. Recently, it was shown that the [FeFe]-hydrogenase from Clostridium beijerinckii (CbA5H) is oxygen-resistant and can be reactivated after oxygen exposure. In this work, we used multifrequency continuous wave and pulsed electron paramagnetic resonance (EPR) spectroscopy to characterize the active center of CbA5H, the H-cluster. Under oxidizing conditions, the spectra were dominated by an additional and unprecedented radical species. The generation of this radical signal depends on the presence of an intact H-cluster and a complete proton transfer pathway including the bridging azadithiolate ligand. Selective ⁵⁷Fe enrichment combined with isotope-sensitive electron-nuclear double resonance (ENDOR) spectroscopy revealed a spin density distribution that resembles an H-cluster state. Overall, we uncovered a radical species in CbA5H that is potentially involved in the redox sensing of CbA5H.

Electron paramagnetic resonance spectroscopy revealed an unprecedented radical species in the oxygen-resistant [FeFe]-hydrogenase CbA5H. Analysis of the isotope-sensitive data suggests that it is related to the active site, the H-cluster.

Molecular Details on Multiple Cofactor Containing Redox Metalloproteins Revealed by Infrared and Resonance Raman Spectroscopies

Vibrational spectroscopy and in particular, resonance Raman (RR) spectroscopy, can provide molecular details on metalloproteins containing multiple cofactors, which are often challenging for other spectroscopies. Due to distinct spectroscopic fingerprints, RR spectroscopy has a unique capacity to monitor simultaneously and independently different metal cofactors that can have particular roles in metalloproteins. These include e.g., (i) different types of hemes, for instance hemes c, a and a3 in caa3-type oxygen reductases, (ii) distinct spin populations, such as electron transfer (ET) low-spin (LS) and catalytic high-spin (HS) hemes in nitrite reductases, (iii) different types of Fe-S clusters, such as 3Fe-4S and 4Fe-4S centers in di-cluster ferredoxins, and (iv) bi-metallic center and ET Fe-S clusters in hydrogenases. IR spectroscopy can provide unmatched molecular details on specific enzymes like hydrogenases that possess catalytic centers coordinated by CO and CN- ligands, which exhibit spectrally well separated IR bands. This article reviews the work on metalloproteins for which vibrational spectroscopy has ensured advances in understanding structural and mechanistic properties, including multiple heme-containing proteins, such as nitrite reductases that house a notable total of 28 hemes in a functional unit, respiratory chain complexes, and hydrogenases that carry out the most fundamental functions in cells.

Nuclear Resonance Vibrational Spectroscopy: A Modern Tool to Pinpoint Site-Specific Cooperative Processes

Nuclear resonant vibrational spectroscopy (NRVS) is a synchrotron radiation (SR)-based nuclear inelastic scattering spectroscopy that measures the phonons (i.e., vibrational modes) associated with the nuclear transition. It has distinct advantages over traditional vibration spectroscopy and has wide applications in physics, chemistry, bioinorganic chemistry, materials sciences, and geology, as well as many other research areas. In this article, we present a scientific and figurative description of this yet modern tool for the potential users in various research fields in the future. In addition to short discussions on its development history, principles, and other theoretical issues, the focus of this article is on the experimental aspects, such as the instruments, the practical measurement issues, the data process, and a few examples of its applications. The article concludes with introduction to non-57Fe NRVS and an outlook on the impact from the future upgrade of SR rings.

[FeFe]-Hydrogenases: maturation and reactivity of enzymatic systems and overview of biomimetic models

[FeFe]-hydrogenases recieved increasing interest in the last decades. This review summarises important findings regarding their enzymatic reactivity as well as inorganic models applied as electro- and photochemical catalysts.

Hydroxy-bridged resting states of a [NiFe]-hydrogenase unraveled by cryogenic vibrational spectroscopy and DFT computations

The catalytic mechanism of [NiFe]-hydrogenases is a subject of extensive research. Apart from at least four reaction intermediates of H₂/H⁺ cycling, there are also a number of resting states, which are formed under oxidizing conditions. Although not directly involved in the catalytic cycle, the knowledge of their molecular structures and reactivity is important, because these states usually accumulate in the course of hydrogenase purification and may also play a role in vivo during hydrogenase maturation. Here, we applied low-temperature infrared (cryo-IR) and nuclear resonance vibrational spectroscopy (NRVS) to the isolated catalytic subunit (HoxC) of the heterodimeric regulatory [NiFe]-hydrogenase (RH) from Ralstonia eutropha. Cryo-IR spectroscopy revealed that the HoxC protein can be enriched in almost pure resting redox states suitable for NRVS investigation. NRVS analysis of the hydrogenase catalytic center is usually hampered by strong spectral contributions of the FeS clusters of the small, electron-transferring subunit. Therefore, our approach to investigate the FeS cluster-free, ⁵⁷Fe-labeled HoxC provided an unprecedented insight into the [NiFe] site modes, revealing their contributions in a spectral range otherwise superimposed by FeS cluster-derived bands. Rationalized by density functional theory (DFT) calculations, our data provide structural descriptions of the previously uncharacterized hydroxy- and water-containing resting states. Our work highlights the relevance of cryogenic vibrational spectroscopy and DFT to elucidate the structure of barely defined redox states of the [NiFe]-hydrogenase active site.

Active site vibrations of a [NiFe]-hydrogenase catalytic subunit are selectively probed by IR and NRV spectroscopy in two Ni^IIFe^II and Ni^IIIFe^II resting states, contributing in combination with DFT modeling to rationalized structural candidates.

In Vitro Assembly as a Tool to Investigate Catalytic Intermediates of [NiFe]-Hydrogenase

[NiFe]-hydrogenases catalyze the reversible reaction H2 ⇄ 2H+ + 2e-. Their basic module consists of a large subunit, coordinating the NiFe(CO)(CN)2 center, and a small subunit that carries electron-transferring iron-sulfur clusters. Here, we report the in vitro assembly of fully functional [NiFe]-hydrogenase starting from the isolated large and small subunits. Activity assays complemented by spectroscopic measurements revealed a native-like hydrogenase. This approach was used to label exclusively the NiFe(CO)(CN)2 center with 57Fe, enabling a clear view of the catalytic site by means of nuclear resonance vibrational spectroscopy. This strategy paves the way for in-depth studies of [NiFe]-hydrogenase catalytic intermediates.

Bioassembly of complex iron-sulfur enzymes: hydrogenases and nitrogenases

Nature uses multinuclear metal clusters to catalyse a number of important multielectron redox reactions. Examples that employ complex Fe-S clusters in catalysis include the Fe-Mo cofactor (FeMoco) of nitrogenase and its V and all-Fe variants, and the [FeFe] and [NiFe] hydrogenases. This Perspective begins with a focus on the catalytic H-cluster of [FeFe] hydrogenase, which is highly active in producing molecular H₂. There has been much recent progress in characterizing the enzyme-catalysed assembly of the H-cluster, including information gleaned from spectroscopy combined with in vitro isotopic labelling of this cluster using chemical synthesis. We then compare the lessons learned from H-cluster biosynthesis to what is known about the bioassembly of the binuclear active site of [NiFe] hydrogenase and the nitrogenase active site cluster FeMoco.

Caught in the Hinact : Crystal Structure and Spectroscopy Reveal a Sulfur Bound to the Active Site of an O2 -stable State of [FeFe] Hydrogenase

[FeFe] hydrogenases are the most active H2 converting catalysts in nature, but their extreme oxygen sensitivity limits their use in technological applications. The [FeFe] hydrogenases from sulfate reducing bacteria can be purified in an O2 -stable state called Hinact . To date, the structure and mechanism of formation of Hinact remain unknown. Our 1.65 Å crystal structure of this state reveals a sulfur ligand bound to the open coordination site. Furthermore, in-depth spectroscopic characterization by X-ray absorption spectroscopy (XAS), nuclear resonance vibrational spectroscopy (NRVS), resonance Raman (RR) spectroscopy and infrared (IR) spectroscopy, together with hybrid quantum mechanical and molecular mechanical (QM/MM) calculations, provide detailed chemical insight into the Hinact state and its mechanism of formation. This may facilitate the design of O2 -stable hydrogenases and molecular catalysts.

Spin Polarization Reveals the Coordination Geometry of the [FeFe] Hydrogenase Active Site in Its CO-Inhibited State

The active site of [FeFe] hydrogenase features a binuclear iron cofactor Fe₂ADT(CO)₃(CN)₂, where ADT represents the bridging ligand aza-propane-dithiolate. The terminal diatomic ligands all coordinate in a basal configuration, and one CO bridges the two irons leaving an open coordination site at which the hydrogen species and the competitive inhibitor CO bind. Externally supplied CO is expected to coordinate in an apical configuration. However, an alternative configuration has been proposed in which, due to ligand rotation, the CN^- bound to the distal Fe becomes apical. Using selective ¹³C isotope labeling of the CN^- and CO_ext ligands in combination with pulsed ¹³C electron-nuclear-nuclear triple resonance spectroscopy, spin polarization effects are revealed that, according to density functional theory calculations, are consistent with only the "unrotated" apical CO_ext configuration.

Radical SAM Enzyme HydE Generates Adenosylated Fe(I) Intermediates En Route to the [FeFe]-Hydrogenase Catalytic H-Cluster

The H-cluster of [FeFe]-hydrogenase consists of a [4Fe-4S]H-subcluster linked by a cysteinyl bridge to a unique organometallic [2Fe]H-subcluster assigned as the site of interconversion between protons and molecular hydrogen. This [2Fe]H-subcluster is assembled by a set of Fe-S maturase enzymes HydG, HydE and HydF. Here we show that the HydG product [FeII(Cys)(CO)2(CN)] synthon is the substrate of the radical SAM enzyme HydE, with the generated 5'-deoxyadenosyl radical attacking the cysteine S to form a C5'-S bond concomitant with reduction of the central low-spin Fe(II) to the Fe(I) oxidation state. This leads to the cleavage of the cysteine C3-S bond, producing a mononuclear [FeI(CO)2(CN)S] species that serves as the precursor to the dinuclear Fe(I)Fe(I) center of the [2Fe]H-subcluster. This work unveils the role played by HydE in the enzymatic assembly of the H-cluster and expands the scope of radical SAM enzyme chemistry.

New Phosphorous-Based [FeFe]-Hydrogenase Models

[FeFe]-hydrogenases have attracted research for more than twenty years as paragons for the design of new catalysts for the hydrogen evolution reaction (HER). The bridging dithiolate comprising a secondary amine as bridgehead is the key element for the reactivity of native [FeFe]-hydrogenases and was therefore the midpoint of hundreds of biomimetic hydrogenase models. However, within those mimics, phosphorous is barely seen as a central element in the azadithiolato bridge despite being the direct heavier homologue of nitrogen. We herein synthesized three new phosphorous based [FeFe]-hydrogenase models by reacting dithiols (HSCH2)2P(O)R (R = Me, OEt, OPh) with Fe3(CO)12. All synthesized mimics show catalytic reactivity regarding HER and change their mechanisms depending on the strength of the used acid. In all presented mimics, the oxide is the center of reactivity, independent of the nature of the bridgehead. However, the phosphorous atom might be reduced by the methods we present herein to alter the reactivity of the model compounds towards protons and oxygen.

Serine is the molecular source of the NH(CH2)2 bridgehead moiety of the in vitro assembled [FeFe] hydrogenase H-cluster

The active site of [FeFe] hydrogenase, the H-cluster, consists of a canonical [4Fe–4S]_H subcluster linked to a unique binuclear [2Fe]_H subcluster containing three CO, two CN⁻ and a bridging azadithiolate (adt, NH(CH₂S⁻)₂) ligand. While it is known that all five diatomic ligands are derived from tyrosine, there has been little knowledge as to the formation and installation of the adt ligand. Here, by using a combination of a cell-free in vitro maturation approach with pulse electronic paramagnetic resonance spectroscopy, we discover that serine donates the nitrogen atom and the CH₂ group to the assembly of the adt ligand. More specifically, both CH₂ groups in adt are sourced from the C3 methylene of serine.

The CH₂NHCH₂ bridgehead moiety of the [FeFe] hydrogenase H-cluster is derived from serine as revealed by isotope labeling and EPR spectroscopy.

The Chatt reaction: conventional routes to homoleptic arenemetalates of d-block elements

Joseph Chatt was the first to discover in the early 1960s that previously unknown transition metal compounds were accessible and isolable via the reactions of alkali metal arene radical anions with transition metal precursors containing good leaving groups, such as weakly basic neutral or anionic ligands, especially halides. Later Peter Timms confirmed the importance of these early studies with the synthesis of several new bis(arene)metal(0) sandwich compounds by a variant of Chatt's route. Following a brief historical survey of alkali metal arene compounds, first examined in some detail by Wilhelm Schlenk, use of these reagents in the conventional syntheses of anionic homoleptic arene metal complexes of the d-block elements will be described. In several cases these species are quite useful because they function as storable "naked" atomic metal anion reagents, especially in their reactions with carbon monoxide and isocyanides. In view of Chatt's seminal contributions to an often unique route to organometallic and inorganic compounds, it is proposed that this valuable synthetic method be named the "Chatt reaction" in honor of a giant of chemistry.

Differential Protonation at the Catalytic Six-Iron Cofactor of [FeFe]-Hydrogenases Revealed by 57Fe Nuclear Resonance X-ray Scattering and Quantum Mechanics/Molecular Mechanics Analyses

[FeFe]-hydrogenases are efficient biological hydrogen conversion catalysts and blueprints for technological fuel production. The relations between substrate interactions and electron/proton transfer events at their unique six-iron cofactor (H-cluster) need to be elucidated. The H-cluster comprises a four-iron cluster, [4Fe4S], linked to a diiron complex, [FeFe]. We combined ⁵⁷Fe-specific X-ray nuclear resonance scattering experiments (NFS, nuclear forward scattering; NRVS, nuclear resonance vibrational spectroscopy) with quantum-mechanics/molecular-mechanics computations to study the [FeFe]-hydrogenase HYDA1 from a green alga. Selective ⁵⁷Fe labeling at only [4Fe4S] or [FeFe], or at both subcomplexes was achieved by protein expression with a ⁵⁷Fe salt and in vitro maturation with a synthetic diiron site precursor containing ⁵⁷Fe. H-cluster states were populated under infrared spectroscopy control. NRVS spectral analyses facilitated assignment of the vibrational modes of the cofactor species. This approach revealed the H-cluster structure of the oxidized state (Hox) with a bridging carbon monoxide at [FeFe] and ligand rearrangement in the CO-inhibited state (Hox-CO). Protonation at a cysteine ligand of [4Fe4S] in the oxidized state occurring at low pH (HoxH) was indicated, in contrast to bridging hydride binding at [FeFe] in a one-electron reduced state (Hred). These findings are direct evidence for differential protonation either at the four-iron or diiron subcomplex of the H-cluster. NFS time-traces provided Mössbauer parameters such as the quadrupole splitting energy, which differ among cofactor states, thereby supporting selective protonation at either subcomplex. In combination with data for reduced states showing similar [4Fe4S] protonation as HoxH without (Hred') or with (Hhyd) a terminal hydride at [FeFe], our results imply that coordination geometry dynamics at the diiron site and proton-coupled electron transfer to either the four-iron or the diiron subcomplex discriminate catalytic and regulatory functions of [FeFe]-hydrogenases. We support a reaction cycle avoiding diiron site geometry changes during rapid H₂ turnover.

Electronic Structure of Two Catalytic States of the [FeFe] Hydrogenase H-Cluster As Probed by Pulse Electron Paramagnetic Resonance Spectroscopy

The active site of the [FeFe] hydrogenase (HydA1), the H-cluster, is a 6-Fe cofactor that contains CO and CN^- ligands. It undergoes several different oxidation and protonation state changes in its catalytic cycle to metabolize H₂. Among them, the well-known H_ox state and the recently identified H_hyd state are thought to be directly involved in H₂ activation and evolution, and they are both EPR active with net spin S = 1/2. Herein, we report the pulse electronic paramagnetic spectroscopic investigation of these two catalytic states in Chlamydomonas reinhardtii HydA1 ( CrHydA1). Using an in vitro biosynthetic maturation approach, we site-specifically installed ¹³C into the CO or CN^- ligands and ⁵⁷Fe into the [2Fe]_H subcluster of the H-cluster in order to measure the hyperfine couplings to these magnetic nuclei. For H_ox, we measured ¹³C hyperfine couplings (¹³CO a_iso of 25.5, 5.8, and 4.5 MHz) corresponding to all three CO ligands in the H-cluster. We also observed two ⁵⁷Fe hyperfine couplings (⁵⁷Fe a_iso of ∼17 and 5.7 MHz) arising from the two Fe atoms in the [2Fe]_H subcluster. For H_hyd, we only observed two distinct ¹³CO hyperfine interactions (¹³CO a_iso of 0.16 and 0.08 MHz) and only one for ¹³CN^- (¹³CN a_iso of 0.16 MHz); the couplings to the ¹³CO/¹³CN^- on the distal Fe of [2Fe]_H may be too small to detect. We also observed a very small (<0.3 MHz) ⁵⁷Fe HFI from the labeled [2Fe]_H subcluster and four ⁵⁷Fe HFI from the labeled [4Fe-4S]_H subcluster (⁵⁷Fe a_iso of 7.2, 16.6, 28.2, and 35.3 MHz). These hyperfine coupling constants are consistent with the previously proposed electronic structure of the H-cluster at both H_ox and H_hyd states and provide a basis for more detailed analysis.

Terminal Hydride Species in [FeFe]-Hydrogenases Are Vibrationally Coupled to the Active Site Environment

A combination of nuclear resonance vibrational spectroscopy (NRVS), FTIR spectroscopy, and DFT calculations was used to observe and characterize Fe-H/D bending modes in CrHydA1 [FeFe]-hydrogenase Cys-to-Ser variant C169S. Mutagenesis of cysteine to serine at position 169 changes the functional group adjacent to the H-cluster from a -SH to -OH, thus altering the proton transfer pathway. The catalytic activity of C169S is significantly reduced compared to that of native CrHydA1, presumably owing to less efficient proton transfer to the H-cluster. This mutation enabled effective capture of a hydride/deuteride intermediate and facilitated direct detection of the Fe-H/D normal modes. We observed a significant shift to higher frequency in an Fe-H bending mode of the C169S variant, as compared to previous findings with reconstituted native and oxadithiolate (ODT)-substituted CrHydA1. On the basis of DFT calculations, we propose that this shift is caused by the stronger interaction of the -OH group of C169S with the bridgehead -NH- moiety of the active site, as compared to that of the -SH group of C169 in the native enzyme.

Energy-Efficient Hydrogen Evolution by Fe-S Electrocatalysts: Mechanistic Investigations

The intrinsic catalytic property of a Fe-S complex toward H₂ evolution was investigated in a wide range of acids. The title complex exhibited catalytic events at -1.16 and -1.57 V (vs Fc⁺/Fc) in the presence of trifluoromethanesulfonic acid (HOTf) and trifluoroacetic acid (TFA), respectively. The processes corresponded to the single reduction of the Fe-hydride-S-proton and Fe-hydride species, respectively. When anilinium acid was used, the catalysis occurred at -1.16 V, identical with the working potential of the HOTf catalysis, although the employment of anilinium acid was only capable of achieving the Fe-hydride state on the basis of the spectral and calculated results. The thermodynamics and kinetics of individual steps of the catalysis were analyzed by density functional theory (DFT) calculations and electroanalytical simulations. The stepwise CCE or CE (C, chemical; E, electrochemical) mechanism was operative from the HOTf or TFA source, respectively. In contrast, the involvement of anilinium acid most likely initiated a proton-coupled electron transfer (PCET) pathway that avoided the disfavored intermediate after the initial protonation. Via the PCET pathway, the heterogeneous electron transfer rate was increased and the overpotential was decreased by 0.4 V in comparison with the stepwise pathways. The results showed that the PCET-involved catalysis exhibited substantial kinetic and thermodynamic advantages in comparison to the stepwise pathway; thus, an efficient catalytic system for proton reduction was established.

Ultrafast Photodynamics of Cyano-Functionalized [FeFe] Hydrogenase Model Compounds

[FeFe] hydrogenases are efficient enzymes that produce hydrogen gas under mild conditions. Synthetic model compounds containing all CO or mixed CO/PMe3 ligands were previously studied by us and others with ultrafast ultraviolet or visible pump-infrared probe spectroscopy in an effort to better understand the function and interactions of the active site with light. Studies of anionic species containing cyano groups, which more closely match the biological active site, have been elusive. In this work, two model compounds dissolved in room-temperature acetonitrile solution were examined: [Fe2(μ-S2C3H6)(CO)4(CN)2]2- (1) and [Fe2(μ-S2C2H4)(CO)4(CN)2]2- (2). These species exhibit long-lived transient signals consistent with loss of one CO ligand with potential isomerization of newly formed ground electronic state photoproducts, as previously observed with all-CO and CO/PMe3-containing models. We find no evidence for fast (ca. 150 ps) relaxation seen in the all-CO and CO/PMe3 compounds because of the absence of the metal-to-metal charge transfer band in the cyano-functionalized models. These results indicate that incorporation of cyano ligands may significantly alter the electronic properties and photoproducts produced immediately after photoexcitation, which may influence the catalytic activity of model compounds when attached to photosensitizers.

A [4Fe-4S]-Fe(CO)(CN)-L-cysteine intermediate is the first organometallic precursor in [FeFe] hydrogenase H-cluster bioassembly

Biosynthesis of the [FeFe] hydrogenase active site (the 'H-cluster') requires the interplay of multiple proteins and small molecules. Among them, the radical S-adenosylmethionine enzyme HydG, a tyrosine lyase, has been proposed to generate a complex that contains an Fe(CO)₂(CN) moiety that is eventually incorporated into the H-cluster. Here we describe the characterization of an intermediate in the HydG reaction: a [4Fe-4S][(Cys)Fe(CO)(CN)] species, 'Complex A', in which a CO, a CN^- and a cysteine (Cys) molecule bind to the unique 'dangler' Fe site of the auxiliary [5Fe-4S] cluster of HydG. The identification of this intermediate-the first organometallic precursor to the H-cluster-validates the previously hypothesized HydG reaction cycle and provides a basis for elucidating the biosynthetic origin of other moieties of the H-cluster.

Spectroscopic investigations of a semi-synthetic [FeFe] hydrogenase with propane di-selenol as bridging ligand in the binuclear subsite: comparison to the wild type and propane di-thiol variants

[FeFe] Hydrogenases catalyze the reversible conversion of H₂ into electrons and protons. Their catalytic site, the H-cluster, contains a generic [4Fe–4S]_H cluster coupled to a [2Fe]_H subsite [Fe₂(ADT)(CO)₃(CN)₂]²⁻, ADT = µ(SCH₂)₂NH. Heterologously expressed [FeFe] hydrogenases (apo-hydrogenase) lack the [2Fe]_H unit, but this can be incorporated through artificial maturation with a synthetic precursor [Fe₂(ADT)(CO)₄(CN)₂]²⁻. Maturation with a [2Fe] complex in which the essential ADT amine moiety has been replaced by CH₂ (PDT = propane-dithiolate) results in a low activity enzyme with structural and spectroscopic properties similar to those of the native enzyme, but with simplified redox behavior. Here, we study the effect of sulfur-to-selenium (S-to-Se) substitution in the bridging PDT ligand incorporated in the [FeFe] hydrogenase HydA1 from Chlamydomonas reinhardtii using magnetic resonance (EPR, NMR), FTIR and spectroelectrochemistry. The resulting HydA1-PDSe enzyme shows the same redox behavior as the parent HydA1-PDT. In addition, a state is observed in which extraneous CO is bound to the open coordination site of the [2Fe]_H unit. This state was previously observed only in the native enzyme HydA1-ADT and not in HydA1-PDT. The spectroscopic features and redox behavior of HydA1-PDSe, resulting from maturation with [Fe₂(PDSe)(CO)₄(CN)₂]²⁻, are discussed in terms of spin and charge density shifts and provide interesting insight into the electronic structure of the H-cluster. We also studied the effect of S-to-Se substitution in the [4Fe–4S] subcluster. The reduced form of HydA1 containing only the [4Fe–4Se]_H cluster shows a characteristic S = 7/2 spin state which converts back into the S = 1/2 spin state upon maturation with a [2Fe]–PDT/ADT complex.

From protein engineering to artificial enzymes - biological and biomimetic approaches towards sustainable hydrogen production

Hydrogen gas is used extensively in industry today and is often put forward as a suitable energy carrier due its high energy density. Currently, the main source of molecular hydrogen is fossil fuels via steam reforming. Consequently, novel production methods are required to improve the sustainability of hydrogen gas for industrial processes, as well as paving the way for its implementation as a future solar fuel. Nature has already developed an elaborate hydrogen economy, where the production and consumption of hydrogen gas is catalysed by hydrogenase enzymes. In this review we summarize efforts on engineering and optimizing these enzymes for biological hydrogen gas production, with an emphasis on their inorganic cofactors. Moreover, we will describe how our understanding of these enzymes has been applied for the preparation of bio-inspired/-mimetic systems for efficient and sustainable hydrogen production.

Sterically Stabilized Terminal Hydride of a Diiron Dithiolate

The kinetically robust hydride [t-HFe₂(Me₂pdt)(CO)₂(dppv)₂]⁺ ([t-H1]⁺) (Me₂pdt^2- = Me₂C(CH₂S^-)₂; dppv = cis-1,2-C₂H₂(PPh₂)₂) and related derivatives were prepared with ⁵⁷Fe enrichment for characterization by NMR, FT-IR, and NRVS. The experimental results were rationalized using DFT molecular modeling and spectral simulations. The spectroscopic analysis was aimed at supporting assignments of Fe-H vibrational spectra as they relate to recent measurements on [FeFe]-hydrogenase enzymes. The combination of bulky Me₂pdt^2- and dppv ligands stabilizes the terminal hydride with respect to its isomerization to the 5-16 kcal/mol more stable bridging hydride ([μ-H1]⁺) with t_1/2(313.3 K) = 19.3 min. In agreement with the nOe experiments, the calculations predict that one methyl group in [t-H1]⁺ interacts with the hydride with a computed CH···HFe distance of 1.7 Å. Although [t-H⁵⁷1]⁺ exhibits multiple NRVS features in the 720-800 cm^-1 region containing the bending Fe-H modes, the deuterated [t-D⁵⁷1]⁺ sample exhibits a unique Fe-D/CO band at ∼600 cm^-1. In contrast, the NRVS spectra for [μ-H⁵⁷1]⁺ exhibit weaker bands near 670-700 cm^-1 produced by the Fe-H-Fe wagging modes coupled to Me₂pdt^2- and dppv motions.

[FeFe]-Hydrogenases: recent developments and future perspectives

[FeFe]-Hydrogenases are the most efficient enzymes for catalytic hydrogen turnover.

NRVS for Fe in Biology: Experiment and Basic Interpretation

For over 20 years, nuclear resonance vibrational spectroscopy (NRVS) has been used to study vibrational dynamics of iron-containing materials. With the only selection rule being iron motion, ⁵⁷Fe NRVS has become an excellent tool to study iron-containing enzymes. Over the past decade, considerable progress has been made in the study of complex metalloenzymes using NRVS. Iron cofactors in heme-containing globins; [2Fe2S], [3Fe4S], [4Fe4S] proteins; the [NiFe] and [FeFe] hydrogenases; and nitrogenases have been explored in a fashion not possible through traditional vibrational spectroscopy. In this chapter, we discuss the basics of NRVS, a strategy to perform NRVS, and a discussion of the application of NRVS on rubredoxin and [FeFe] hydrogenase.

Reaction Coordinate Leading to H2 Production in [FeFe]-Hydrogenase Identified by Nuclear Resonance Vibrational Spectroscopy and Density Functional Theory

[FeFe]-hydrogenases are metalloenzymes that reversibly reduce protons to molecular hydrogen at exceptionally high rates. We have characterized the catalytically competent hydride state (Hhyd) in the [FeFe]-hydrogenases from both Chlamydomonas reinhardtii and Desulfovibrio desulfuricans using 57Fe nuclear resonance vibrational spectroscopy (NRVS) and density functional theory (DFT). H/D exchange identified two Fe-H bending modes originating from the binuclear iron cofactor. DFT calculations show that these spectral features result from an iron-bound terminal hydride, and the Fe-H vibrational frequencies being highly dependent on interactions between the amine base of the catalytic cofactor with both hydride and the conserved cysteine terminating the proton transfer chain to the active site. The results indicate that Hhyd is the catalytic state one step prior to H2 formation. The observed vibrational spectrum, therefore, provides mechanistic insight into the reaction coordinate for H2 bond formation by [FeFe]-hydrogenases.

Electronic and molecular structure relations in diiron compounds mimicking the [FeFe]-hydrogenase active site studied by X-ray spectroscopy and quantum chemistry

Synthetic diiron compounds of the general formula Fe₂(μ-S₂R)(CO)_n(L)_6-n (R = alkyl or aromatic groups; L = CN^- or phosphines) are versatile models for the active-site cofactor of hydrogen turnover in [FeFe]-hydrogenases. A series of 18 diiron compounds, containing mostly a dithiolate bridge and terminal ligands of increasing complexity, was characterized by X-ray absorption and emission spectroscopy in combination with density functional theory. Fe K-edge absorption and Kβ main-line emission spectra revealed the varying geometry and the low-spin state of the Fe(i) centers. Good agreement between experimental and calculated core-to-valence-excitation absorption and radiative valence-to-core-decay emission spectra revealed correlations between spectroscopic and structural features and provided access to the electronic configuration. Four main effects on the diiron core were identified, which were preferentially related to variation either of the dithiolate or of the terminal ligands. Alteration of the dithiolate bridge affected mainly the Fe-Fe bond strength, while more potent donor substitution and ligand field asymmetrization changed the metal charge and valence level localization. In contrast, cyanide ligation altered all relevant properties and, in particular, the frontier molecular orbital energies of the diiron core. Mutual benchmarking of experimental and theoretical parameters provides guidelines to verify the electronic properties of related diiron compounds.