CO₂-Responsive Pillar[5]arene-Based Molecular Recognition in Water: Establishment and Application in Gas-Controlled Self-Assembly and Release

Macronutrient and PFOS bioavailability manipulated by aeration-driven rhizospheric organic nanocapsular assembly

Ubiquitous presence of the extremely persistent pollutants, per- and polyfluoroalkyl substances, is drawing ever-increasing concerns for their high eco-environmental risks which, however, are insufficiently considered based on the assembly characteristics of those amphiphilic molecules in environment. This study investigated the re-organization and self-assembly of perfluorooctane sulfonate (PFOS) and macronutrient molecules from rhizospheric organic (RhO) matter induced with a common operation of aeration. Atomic force microscopy (AFM) with infrared spectroscopy (IR)-mapping clearly showed that, after aeration and stabilization, RhO nanocapsules (∼ 1000 nm or smaller) with a core of PFOS-protein complexes coated by "lipid-carbohydrate" layers were observed whereas the capsule structure with a lipid core surrounded by "protein-carbohydrate-protein" multilayers was obtained in the absence of PFOS. It is aeration that exerted the disassociation of pristine RhO components, after which the environmental concentration PFOS restructured the self-assembly structure in a conspicuous "disorder-to-order" transition. AFM IR-mapping analysis of faeces combined with quantification of component uptake denoted the decreased ingestion and utilization of both PFOS and proteins compared with lipids and carbohydrates when Daphnia magna were fed with RhO nanocapsules. RhO nanocapsules acted as double-edged swords via simultaneously impeding the bioaccessibility of hazardous PFOS molecules and macronutrient proteins; and the latter might be more significant, which caused a malnutrition status within merely 48 h. Elucidating the assembly structure of natural organic matter and environmental concentration PFOS, the finding of this work could be a crucial supplementation to the high-dose-dependent eco-effect investigations on PFOS.

White-Light Emission from a Host-Guest Composite between Carboxylatopillar[5]arene-Modified N-Doped Carbon Dots and Rhodamine 6G for Rutin Detection

The construction of tunable white-light-emitting materials has garnered increasing attention in the scientific community. In this study, N-doped carbon dots (N-CDs) were surface-modified with carboxylatopillar[5]arene (CP[5]) using an EDC-NHS coupling reaction to create CCDs. CCDs were then conjugated with rhodamine 6G (R6G) through host-guest interactions to fabricate the CCDs-R6G composites. These composites produced two-color fluorescence emission peaks at 447 and 557 nm when excited by a wavelength of 340 nm. Excitingly, white-light emission (0.28, 0.30) can be readily achieved by varying the R6G concentration. To further explore potential applications, a new detection method for rutin (RT) based on the inner filter effect (IFE) was developed. Experimental results verify the practicality and reliability of the fluorescence sensor based on CCDs-R6G composites for RT detection in real samples.

Study of Drug Delivery Using Purely Organic Macrocyclic Containers-Cucurbit[7]uril and Pillararene

An impaired immune system is the root of various human ailments provoking the urge to find vehicle-mediated quick delivery of small drug molecules and other vital metabolites to specific tissues and organs. Thus, drug delivery strategies are in need of improvement in therapeutic efficacy. It can be achieved only by increasing the drug-loading capacity, increasing the sustained release of a drug to its target site, easy relocation of drug molecules associated with facile complexation-induced properties of molecular vehicles, and high stimuli-responsive drug administration. Supramolecular drug delivery systems (SDDS) provide a much needed robust yet facile platform for fabricating innovative drug nanocarriers assembled by thermodynamically noncovalent interaction with the tunable framework and above-mentioned properties. Measures of cytotoxicity and biocompatibility are the two main criteria that lie at the root of any promising medicinal applications. This Review features significant advancements in (i) supramolecular host-guest complexation using cucurbit[7]uril (CB[7]), (ii) encapsulation of the drug and its delivery application tailored for CB[7], (iii) self-assembly of supramolecular amphiphiles, (iv) supramolecular guest relay using host-protein nanocavities, (v) pillararene (a unique macrocyclic host)-mediated SDDS for the delivery of smart nanodrugs for siRNA, fluorescent molecules, and insulin for juvenile diabetes. Furthermore, fundamental questions and future hurdles related to smart SDDS based on CB[7] and pillararenes and their future promising breakthrough implementations are also distinctly outlined in this Review.

Smart organic materials based on macrocycle hosts

Innovative design of smart organic materials is of great importance for the advancement of modern technology. Macrocycle hosts, possessing cyclic skeletons, intrinsic cavities, and specific guest binding properties, have demonstrated pronounced potential for the elaborate fabrication of a variety of functional organic materials with smart stimuli-responsive characteristics. In this tutorial review, we outline the current development of smart organic materials based on macrocycle hosts as key building blocks, focusing on the design principles and functional mechanisms of the tailored systems. Three main types of macrocycle-based smart organic materials are exemplified as follows according to the distinct forms of construction patterns: (1) supramolecular polymeric materials and nanoassemblies; (2) adaptive molecular crystals; (3) smart porous organic materials. The responsive performances of macrocycle-containing smart materials in versatile aspects, including mechanically adaptive polymers, soft optoelectronic devices, data encryption, drug delivery systems, artificial transmembrane channels, crystalline-state gas adsorption/separation, and fluorescence sensing, are illustrated by discussing the representative studies as paradigms, where the roles of macrocycles in these systems are highlighted. We also provide in the conclusion part the perspectives and remaining challenges in this burgeoning field.

Recent advances in permeable polymersomes: fabrication, responsiveness, and applications

Polymersomes are vesicular nanostructures enclosed by a bilayer-membrane self-assembled from amphiphilic block copolymers, which exhibit higher stability compared with their biological analogues (e.g. liposomes). Due to their versatility, polymersomes have found various applications in different research fields such as drug delivery, nanomedicine, biological nanoreactors, and artificial cells. However, polymersomes prepared with high molecular weight components typically display low permeability to molecules and ions. It hence remains a major challenge to balance the opposing features of robustness and permeability of polymersomes. In this review, we focus on the design and strategies for fabricating permeable polymersomes, including polymersomes with intrinsic permeability, the formation of nanopores in the membrane bilayers by protein insertion, and the construction of stimuli-responsive polymersomes. Then, we highlight the applications of permeable polymersomes in the fields of biomimetic nanoreactors, artificial cells and organelles, and nanomedicine, to underline the challenges in the development of polymersomes as soft matter with biomedical utilities.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Advances in CO2-switchable surfactants towards the fabrication and application of responsive colloids

CO₂-switchable surfactants have selective surface-activity, which can be activated or deactivated either by adding or removing CO₂ from the solution. This feature enables us to use them in the fabrication of responsive colloids, a group of dispersed systems that can be controlled by changing the environmental conditions. In chemical processes, including extraction, reaction, or heterogeneous catalysis, colloids are required in some specific steps of the processes, in which maximum contact area between immiscible phases or reactants is desired. Afterward, the colloids must be broken for the postprocessing of products, solvents, and agents, which can be facilitated by using CO₂-switchable surfactants in surfactant-stabilized colloids. These surfactants are mainly cationic and can be activated by the protonation of a nitrogen-containing group upon sparging CO₂ gas. Also, CO₂-switchable superamphiphiles can be formed by non-covalent bonding between components at least one of which is CO₂-switchable. So far, CO₂-switchable surfactants have been used in CO₂-switchable spherical and wormlike micelles, vesicles, emulsions, foams, and Pickering emulsions. Here, we review the fabrication procedure, chemical structure, switching scheme, stability, environmental conditions, and design philosophy of such responsive colloids. Their fields of application are wide, including emulsion polymerization, catalysis, soil washing, drug delivery, extraction, viscosity control, and oil transportation. We also emphasize their application for the CO₂-assisted enhanced oil recovery (EOR) process as a promising approach for carbon capture, utilization, and storage to combat climate change.

Pillararenes as Promising Carriers for Drug Delivery

Since their discovery in 2008 by N. Ogoshi and co-authors, pillararenes (PAs) have become popular hosts for molecular recognition and supramolecular chemistry, as well as other practical applications. The most useful property of these fascinating macrocycles is their ability to accommodate reversibly guest molecules of various kinds, including drugs or drug-like molecules, in their highly ordered rigid cavity. The last two features of pillararenes are widely used in various pillararene-based molecular devices and machines, stimuli-responsive supramolecular/host-guest systems, porous/nonporous materials, organic-inorganic hybrid systems, catalysis, and, finally, drug delivery systems. In this review, the most representative and important results on using pillararenes for drug delivery systems for the last decade are presented.

Separate Reclamation of Oil and Surfactant from Oil-in-Water Emulsion with a CO2-Responsive Material

Oil-in-water (O/W) emulsion is one type of oily wastewater produced by many industries. The treatment of and resource recovery from O/W emulsions are very challenging. Unlike bulk or floating oil, which can be successfully abstracted from wastewater by hydrophobic/oleophilic materials, the abstraction of emulsified oil is not easy because of its highly hydrophilic surface composed of dense surfactants. Separate reclamation of miscible oil and surfactant through a green approach is even more difficult. Here, we report that a CO₂-responsive material can abstract emulsified oil and demulsify the oil droplets. Moreover, it can release the abstracted oil and surfactant separately. This material exhibited a very high adsorption capacity for emulsified oil (14 g g^-1). Upon switching the surface wettability of the material under CO₂ or synthetic flue gas sparging, coalesced oil was reclaimed while the surfactant was retained inside the pores. The hydrophobic character of the material was retrieved when CO₂ was purged with nitrogen sparging or air heating. Then, the surfactant was reclaimed by elution with diluted alkali/ethanol. Oil and surfactant were thus separately reclaimed from the O/W emulsion. High rates of oil removal, oil recovery, and surfactant recovery were maintained during repeated adsorption/desorption operations. This work provides a potentially sustainable and green way for O/W emulsion treatment and resource recovery.

Unravelling the Supramolecular Driving Forces in the Formation of CO2-Responsive Pseudopeptidic Low-Molecular-Weight Hydrogelators

A new family of C₂-symmetric pseudopeptides with a high functional density for supramolecular interactions has been synthetized through the attachment of four amino acid subunits to a diamino aliphatic spacer. The resulting open-chain compounds present remarkable properties as low-molecular-weight hydrogelators. The self-assembled 3D networks were characterized by SEM analyses, observing regular nanofibres with 80–100 nm diameters. Spectroscopic and molecular modelling experiments revealed the presence of strong synergic effects between the H-bonding and π–π interactions, with the best results obtained for the homoleptic tetra-pseudopeptide derived from l-Phe. In addition, these bioinspired hydrogels possessed pH- and CO₂-responsive sol–gel transitions. The formation of ammonium carbamate derivatives in the presence of carbon dioxide led to a detrimental change in its adequate self-assembly. CO₂ desorption temperatures of ca. 70 °C were assigned to the thermodynamically favoured recovery of the supramolecular gel.

Carbon dioxide enhances sulphur-selective conjugate addition reactions

Sulphur-selective conjugate addition reactions play a central role in synthetic chemistry and chemical biology. A general tool for conjugate addition reactions should provide high selectivity in the presence of competing nucleophilic functional groups, namely nitrogen nucleophiles. We report CO₂-mediated chemoselective S-Michael addition reactions where CO₂ can reversibly control the reaction pHs, thus providing practical reaction conditions. The increased chemoselectivity for sulphur-alkylation products was ascribed to CO₂ as a temporary and traceless protecting group for nitrogen nucleophiles, while CO₂ efficiently provide higher conversion and selectivity sulphur nucleophiles on peptides and human serum albumin (HSA) with various electrophiles. This method offers simple reaction conditions for cysteine modification reactions when high chemoselectivity is required.

Switchable bifunctional molecular recognition in water using a pH-responsive Endo-functionalized cavity

The construction of water-soluble synthetic hosts with a stimuli-responsive endo-functionalized cavity is challenging. These hosts feature a switchable cavity and may bring new properties to the fields of self-assembly, molecular machines, and biomedical sciences. Herein, we report a pair of water-soluble naphthotubes with a pH-responsive endo-functionalized cavity. The inward-directing secondary amine group of the hosts can be protonated and deprotonated. Thus, the hosts have different cavity features at the two states and show drastically different binding preference and selectivity in water. We reveal that the binding difference of the two host states is originated from the differences in charge repulsion, hydrogen bonding and the hydrophobic effects. Moreover, the guest binding can be easily switched in a ternary mixture with two guest molecules by adjusting the pH value of the solution. These pH-responsive hosts may be used for the construction of smart self-assembly systems and water-soluble molecular machines.

Mono-mercapto-functionalized pillar[5]arene: a host-guest complexation accelerated reversible redox dimerization

A mono-mercapto-functionalized pillar[5]arene and its dimer, capable of being reversibly interconverted, were successfully synthesized. Fascinatingly, a faster reversible redox conversion involving a dynamic disulfide bond was observed between their host-guest complexes compared with the hosts themselves.

Tailoring CO2-Activated Ion Nanochannels Using Macrocyclic Pillararenes

Gas-responsive nanochannels have great relevance for applications in many fields. Inspired by CO₂-sensitive ion channels, herein we present an approach for designing solid-state nanochannels that allow controlled regulation of ion transport in response to alternate CO₂/N₂ stimuli. The pillar[5]arene (P5N) bearing diethylamine groups can convert into the water-soluble host P5C, containing cationic tertiary ammonium salt groups after absorbing CO₂. Subsequently, the nanochannel walls are tailored using P5N-based host-guest chemistry. The ion transport rate of K⁺ in the P5N nanochannels under CO₂ was 1.66 × 10^-4 mol h^-1 m^-2, whereas that under N₂ was 7.98 × 10^-4 mol h^-1 m^-2. Notably, there was no significant change to the ion current after eight cycles, which may indicate the stability and repeatability of CO₂-activated ion nanochannels. It is speculated that the difference in ion conductance resulted from the change in wettability and surface charge within the nanochannels in response to the gas stimuli. Achieving CO₂-activated ion transport in solid-state nanochannels opens new avenues for biomimetic nanopore systems and advanced separation processes.

Self-Assembling Systems Based on Pillar[5]arenes and Surfactants for Encapsulation of Diagnostic Dye DAPI

In this paper, we report the development of the novel self-assembling systems based on oppositely charged Pillar[5]arenes and surfactants for encapsulation of diagnostic dye DAPI. For this purpose, the aggregation behavior of synthesized macrocycles and surfactants in the presence of Pillar[5]arenes functionalized by carboxy and ammonium terminal groups was studied. It has been demonstrated that by varying the molar ratio in Pillar[5]arene-surfactant systems, it is possible to obtain various types of supramolecular systems: host-guest complexes at equimolar ratio of Pillar[5]arene-surfactant and interpolyelectrolyte complexes (IPECs) are self-assembled materials formed in aqueous medium by two oppositely charged polyelectrolytes (macrocycle and surfactant micelles). It has been suggested that interaction of Pillar[5]arenes with surfactants is predominantly driven by cooperative electrostatic interactions. Synthesized stoichiometric and non-stoichiometric IPECs specifically interact with DAPI. UV-vis, luminescent spectroscopy and molecular docking data show the structural feature of dye-loaded IPEC and key role of the electrostatic, π-π-stacking, cation-π interactions in their formation. Such a strategy for the design of supramolecular Pillar[5]arene-surfactant systems will lead to a synergistic interaction of the two components and will allow specific interaction with the third component (drug or fluorescent tag), which will certainly be in demand in pharmaceuticals and biomedical diagnostics.

The recent progress of synergistic supramolecular polymers: preparation, properties and applications

Interactions for forming supramolecular polymers were reviewed together with their unique properties and applications with detailed examples.

Selenium-containing heterodimeric crown ether acting as an unconventional multi-responsive amphiphile in water

A new heterodimeric crown amphiphile was fabricated, wherein the oxacrown and selencrown ethers provided the desired molecular framework for hydrophilicity and hydrophobicity, respectively. From an integrated perspective, the developed amphiphile possesses features of crown ethers, amines, and selenium-containing species, and its assembly in water can be responsive to diverse chemical effectors-H2O2 and CO2 in a switchable ON/OFF mode to achieve controlled release. It is the first case wherein the applications of cyclic polyethers with different solubilities drives the self-assembly in an aqueous medium.

UV Accelerated Assemblies Constructed Using Calixpyridinium in Aqueous Solution

In this work, an irregular calixpyridinium-suramin sodium supramolecular assembly was constructed by the strong host-guest electrostatic interactions. More interestingly, a novel regular spherical supramolecular assembly was also fabricated by the hydrogen bonding interactions between suramin sodium and the UV accelerated addition product of deprotonated calixpyridinium in water. The same principle was also applied to construct a UV accelerated regular spherical self-assembly by the addition product of deprotonated calixpyridinium in water. Compared with the complicated and irreversible covalent connection of the light-responsive groups to the building block, which is one of the common means of obtaining light-responsive supramolecular systems, this finding not only provides a smart, facile, and universally applicable method to construct deprotonated calixpyridinium-based light-responsive host-guest systems but also provides a new idea for the development of other novel light-responsive building blocks.

Near-Infrared-Induced Contractile Proteinosome Microreactor with a Fast Control on Enzymatic Reactions

Inspired by the compartmentalized structure of cells, self-regulating responsive hollow microcapsules are highly desirable for the modulation of enzymatic reactions. Here, we report a strategy to fabricate gold nanorod embedded proteinosomes by covalently grafting gold nanorods onto the surface of proteinosomes. The excellent photothermal conversion efficiency of the embedded gold nanorod and the thermal phase transition of the grafted PNIPAAm allow the constructed hybrid proteinosomes to show reversible contraction behaviors triggered by near-infrared light with the molecular weight cutoff of the membrane decreased to ca. 50 kDa, and importantly, the contraction frequency of the constructed proteinosomes could be as fast as 1 min and last for at least 15 cycles. Subsequently, the effective encapsulation of three cascade enzymes into the proteinosomes realizes the construction of a near-infrared responsive microreactor that allows control of the cascade reaction by near-infrared illumination, thereby enabling reversible on and off of the enzymatic reaction. Such microcapsule-based reactors demonstrate the potential to alter the membrane molecular weight cutoff, and it is believed that the development of such responsive microcapsules will have great potential for studying cellular responses and provide a platform for future applications in biosensing and drug delivery.

Synthesis of dynamic imine macrocyclic supramolecular polymers via synchronized self-assembly based on dynamic covalent bonds and noncovalent interactions

The preparation of dynamic imine macrocycles and supramolecular polymers is combined into a single step to form supramolecular polymers (SPs). 1,4-Diazabicyclo[2.2.2]octane (DABCO) derived quaternary ammonium salts induce aldehyde and amine building blocks to covalently form imine macrocycles. Multiple noncovalent interactions between hosts (i.e., imine macrocycle) and guests (i.e., DABCO) act as driving forces. Thus, for the first time, dynamic imine macrocyclic supramolecular polymers (DIMPs) have been achieved through the synchronized self-assembly of dynamic covalent bond formed imine macrocycles and noncovalent interactions of hosts-guests.

Supramolecular Vesicles Based on Amphiphilic Pillar[n]arenes for Smart Nano-Drug Delivery

Supramolecular vesicles are the most popular smart nano-drug delivery systems (SDDs) because of their unique cavities, which have high loading carrying capacity and controlled-release action in response to specific stimuli. These vesicles are constructed from amphiphilic molecules via host-guest complexation, typically with targeted stimuli-responsive units, which are particularly important in biotechnology and biomedicine applications. Amphiphilic pillar[n]arenes, which are novel and functional macrocyclic host molecules, have been widely used to construct supramolecular vesicles because of their intrinsic rigid and symmetrical structure, electron-rich cavities and excellent properties. In this review, we first explain the synthesis of three types of amphiphilic pillar[n]arenes: neutral, anionic and cationic pillar[n]arenes. Second, we examine supramolecular vesicles composed of amphiphilic pillar[n]arenes recently used for the construction of SDDs. In addition, we describe the prospects for multifunctional amphiphilic pillar[n]arenes, particularly their potential in novel applications.

Supramolecular Drug-Drug Complex Vesicles Enable Sequential Drug Release for Enhanced Combination Therapy

Drug-drug self-delivery systems serving as both carriers and cargos have been explored as advanced combination chemotherapy strategies to overcome the limitations of the traditional single-drug chemotherapy. However, most known drug-drug self-delivery systems may cause a rapid increase in drug concentration when the single covalent bond is broken, thus leading to high toxicity to organs and low therapeutic efficiency against tumors. To address the above problem, in this study, a novel supramolecular drug-drug complex (SDDC) simultaneously containing both covalent and noncovalent bonds was proposed to realize the sequential release of two drugs in tumor cells for enhanced combination therapy. The SDDC could self-assemble into uniform bilayer supramolecular vesicles (SVs) with a remarkable drug loading capacity and stable drug transport. Notably, the SVs with controlled sequential release ability in tumor cells exhibited a superior synergistic effect and significantly improved therapeutic efficiency with reduced toxicity in in vivo antitumor activity and histological analyses in comparison to either individual free drugs or a mixture of two free drugs. Therefore, by combining the advantages of noncovalent interactions with the dynamic nature and stable covalent bonds, this study opens a new way for cancer therapy.

Monodisperse pillar[5]arene-based polymeric sub-microsphere for on-line extraction coupling with high-performance liquid chromatography to determine antioxidants in the migration of food contact materials

The monodisperse pillar[5]arene-based polymeric sub-microsphere was prepared by polycondensation of hydroxylated pillar[5]arene and cyanuric chloride through a one-pot reaction in mild condition. The preparation was realized by a simple two-step temperature-programmed process without heating operation. The obtained polymeric sub-microsphere exhibited monodisperse and regular spherical structure with uniform particle size distribution of 220-320 nm accounting for 94%. The prominent adsorption capacity of the polymeric sub-microsphere for antioxidants was demonstrated and attributed to the synergistic effect of the cladding interaction with the π-electron rich cavity and hydrophilic interaction with terminal hydroxyl on pillar[5]arene. Then the pillar[5]arene sub-microsphere was packed into a micro-column to realize effective on-line enrichment of antioxidants coupling with high-performance liquid chromatography (HPLC). The flow rate of extraction and desorption solvent, clean-up and desorption volume were assessed to optimize the method. The method showed wide linear ranges with R² greater than 0.9926, low limits of detection (0.030-0.20 μg/L) and limits of quantification (0.10-0.67 μg/L). The developed method was successfully applied to determine trace antioxidants in the migration of food contact materials with simulated solution, which demonstrated the promising potential of this method for practical analysis. Furthermore, the migration behavior of antioxidants from food packaging materials into different food matrix was also investigated.

Supramolecular-Macrocycle-Based Crystalline Organic Materials

Supramolecular macrocycles are well known as guest receptors in supramolecular chemistry, especially host-guest chemistry. In addition to their wide applications in host-guest chemistry and related areas, macrocycles have also been employed to construct crystalline organic materials (COMs) owing to their particular structures that combine both rigidity and adaptivity. There are two main types of supramolecular-macrocycle-based COMs: those constructed from macrocycles themselves and those prepared from macrocycles with other organic linkers. This review summarizes recent developments in supramolecular-macrocycle-based COMs, which are categorized by various types of macrocycles, including cyclodextrins, calixarenes, resorcinarenes, pyrogalloarenes, cucurbiturils, pillararenes, and others. Effort is made to focus on the structures of supramolecular-macrocycle-based COMs and their structure-function relationships. In addition, the application of supramolecular-macrocycle-based COMs in gas storage or separation, molecular separation, solid-state electrolytes, proton conduction, iodine capture, water or environmental treatment, etc., are also presented. Finally, perspectives and future challenges in the field of supramolecular-macrocycle-based COMs are discussed.

pH/ROS Dual-Responsive Supramolecular Vesicles Fabricated by Carboxylated Pillar[6]arene-Based Host-Guest Recognition and Phenylboronic Acid Pinacol Ester Derivative

The pH and reactive oxygen species (ROS) dual-responsive supramolecular vesicle utilizing a novel host-guest molecular recognition between a phenylboronic acid pinacol ester derivative carrying long alkyl chain (PBEC₁₂A) and carboxylated pillar[6]arene (CP[6]) is developed. The host-guest complexation between CP[6] and PBEC₁₂A was first studied in aqueous solution. PBEC₁₂A was encapsulated within CP[6] forming a stable host-guest complex with a binding constant as high as 10⁶ M^-1 order of magnitude. The driving force behind such a host-guest recognition was the combination of electrostatic interaction and hydrophobic effect. Then, the self-assembly of the supra-amphiphiles of PBEC₁₂A-CP[6] host-guest complexes was investigated in aqueous solution through high-resolution transmission electron microscope and dynamic light scattering. It was found that the supra-amphiphiles self-assembled into supramolecular vesicles and the size of the self-assembled supramolecular vesicles could be tuned from 25 to 200 nm by varying the ratio of CP[6] to PBEC₁₂A. To demonstrate the pH- and ROS-responsive properties of the self-assembled vesicles, the supramolecular vesicles self-assembled from PBEC₁₂A/CP[6] (5:1) were utilized. The Nile Red loading and release studies demonstrated that the supramolecular vesicles possessed good pH/ROS dual-responsive properties. This study enriches the field of supra-amphiphile based on noncovalent interactions. It is anticipated that the pH/ROS dual-responsive supramolecular vesicles have potential applications in drug-delivery systems because both the stimuli are in close relation with specific microenvironments of tumors and relevant diseases of the human body.

Vapochromic crystals: understanding vapochromism from the perspective of crystal engineering

Vapochromic materials, which undergo colour and/or emission changes upon exposure to certain vapours or gases, have received increasing attention recently because of their wide range of applications in, e.g., chemical sensors, light-emitting diodes, and environmental monitors. Vapochromic crystals, as a specific kind of vapochromic materials, can be investigated from the perspective of crystal engineering to understand the mechanism of vapochromism. Moreover, understanding the vapochromism mechanism will be beneficial to design and prepare task-specific vapochromic crystals as one kind of low-cost 'electronic nose' to detect toxic gases or volatile organic compounds. This review provides important information in a broad scientific context to develop new vapochromic materials, which covers organometallic or coordination complexes and organic crystals, as well as the different mechanisms of the related vapochromic behaviour. In addition, recent examples of supramolecular vapochromic crystals and metal-organic-framework (MOFs) vapochromic crystals are introduced.

A novel pillar[5]arene-based emission enhanced supramolecular sensor for dual-channel selective detection and separation of Hg2+

We constructed a supramolecular sensor (APRA–G) via a host–guest inclusion interaction between a rhodamine hydrazide-functionalized pillar[5]arene (APRA) and a bipyridine salt guest (G), which formed a stable dimer.

pH-Tolerant giant vesicles composed of cationic lipids with imine linkages and oleic acids

Giant vesicles (GVs) have attracted attention as functional materials because they can encapsulate both hydrophilic and hydrophobic compounds. For next generation functional GVs, both tolerance and stimuli-sensitivity are needed. So far, vesicles tolerant to acidic or basic conditions were generated using a mixture of cationic lipids and fatty acids. Here, to create functional GVs that are tolerant to a wide pH range but sensitively respond at below a specific pH, the behaviour of GVs composed of a cationic lipid with an imine bond and oleic acid was investigated. Even though the GVs prepared by the film swelling method were tolerant to strongly acidic conditions, GVs without oleic acid gradually shrank, accompanied by the generation of oil droplets at the same pH. ¹H NMR analysis revealed that during hydration of the film, the imine bond hydrolysed to provide a cationic surfactant and an oil component in the presence of oleic acid due to its own Lewis basicity, suggesting the dissociation of oleic acid. The results of fluorescence spectroscopy using an environment-responsive probe and IR spectroscopy indicated that the GV tolerance originated from the intermolecular interactions of cationic lipids and anionic oleate.

Giant vesicles composed of cationic lipids having an imine linkage and oleic acid were stable at strong acidic conditions.

Morphology transformation of pillararene-based supramolecular nanostructures

In this feature article, the construction methods and the factors that influence the morphological transformation of pillararene-based supramolecular nanostructures are reviewed.

Controlled binding of organic guests by stimuli-responsive macrocycles

Synthetic supramolecular chemistry pursues not only the construction of new matter, but also control over its inherently dynamic behaviour.

Solvent-assisted coordination driven assembly of a supramolecular architecture featuring two types of connectivity from discrete nanocages

A 3D nanocage architecture with two types of connectivity was successfully assembled from discrete supramolecular nanocages.

The rapid development of supramolecular chemistry provides a powerful bottom-up approach to construct various well-defined nano-architectures with increasing complexity and functionality. Compared to that of small and simple nanometric objects, the self-assembly of larger and more complex nanometric objects, such as nanocages, remains a significant challenge. Herein, we used a discrete nanocage as the monomer to successfully construct a novel three-dimensional (3D) supramolecular architecture, which comprises two types of nanocage building units with different connectivity, using the solvent-assisted coordination-driven assembly approach. The mechanism of this supramolecular assembly process was investigated by electrospray ionization mass spectrometry (ESI-MS) studies, which identified for the first time the formation of a nanocage dimer intermediate during the assembly process. The assembly of discrete nanocages into a 3D supramolecular architecture led to remarkable enhancement of stability and gas adsorption properties.

Simultaneous and Reversible Triggering of the Phase Transfer and Luminescence Change of Amidine-Modified Carbon Dots by CO2

The ability to reversibly manipulate the surface nature of luminescent nanoparticles upon external stimulation enables the development of advanced optical probes for biological sensing and data encoding. Herein, we report the synthesis of a new class of smart carbon dots (CDs) via surface modification of amine-enriched CDs with CO₂-responsive groups of amidine. We present that alternative CO₂ and N₂ bubbling can not only lead to a reversible phase transfer of the CDs between an organic phase and an aqueous phase but also give rise to a corresponding reversible luminescence change between blue and cyan-green. We attribute these observations to changes in both the surface chemistry and the emission states of the CDs triggered by the alternative CO₂/N₂ introduction. We also find a similar luminescence change of the CDs upon alternative exposure to a humid vapor of CO₂ and a mixture of NH₃ and N₂ at room temperature, allowing them to be used as a new class of optical materials for optical encoding.

Supramolecular nanotheranostics based on pillarenes

With the rapid development of supramolecular chemistry and nanomaterials, supramolecular nanotheranostics has attracted remarkable attention owing to the advantages compared with conventional medicine. Supramolecular architectures relying on non-covalent interactions possess reversible and stimuli-responsive features; endowing supramolecular nanotheranostics based on supramolecular assemblies great potentials for the fabrication of integrated novel nanomedicines and controlled drug delivery systems. In particular, pillarenes, as a relatively new class of synthetic macrocycles, are important candidates in the construction of supramolecular therapeutic systems due to their excellent features such as rigid and symmetric structures, facile substitution, and unique host-guest properties. This review summarizes the development of pillarene-based supramolecular nanotheranostics for applications in biological mimicking, virus inhibition, cancer therapy, and diagnosis, which contains the following two major parts: (a) pillarene-based hybrid supramolecular nanotheranostics upon hybridizing with porous materials such as mesoporous silica nanoparticles, metal-organic frameworks, metal nanoparticles, and other inorganic materials; (b) pillarene-based organic supramolecular therapeutic systems that include supramolecular amphiphilic systems, artificial channels, and prodrugs based on host-guest complexes. Finally, perspectives on how pillarene-based supramolecular nanotheranostics will advance the field of pharmaceuticals and therapeutics are given.

Carboxylated pillar[n]arene (n = 5-7) host molecules: high affinity and selective binding in water

Water-soluble carboxylated pillar[n]arenes (n = 5-7) or WPns were discovered to be high affinity host molecules with selective binding for different guests based on a systematic investigation. We chose 22 dyes or guests and determined the value of K_a for 51 supramolecular complexes. It was discovered that the electrostatic interactions, π-π stacking and hydrophobic effect were the driving force for high affinity supramolecular encapsulation. WPns had selective binding toward suitable guests based on their sizes and molecular structures. Based on the above discovery, a guest (guest 21) was designed, which bound with WP7 3.3-fold tighter compared to methyl viologen.

Functionalization at Will of Rim-Differentiated Pillar[5]arenes

The development of an efficient synthetic route toward rim-differentiated C₅-symmetric pillar[5]arenes (P[5]s), whose two rims are decorated with different chemical functionalities, opens up successive transformations of this macrocyclic scaffold. This paper describes a gram-scale synthesis of a C₅-symmetric penta-hydroxy P[5] precursor, and a range of highly efficient reactions that allow functionalizing either rim at will via, e.g., sulfur(VI) fluoride exchange (SuFEx) reactions, esterifications, or Suzuki–Miyaura coupling. Afterward, BBr₃ demethylation activates another rim for similar functionalizations.

Thermally activated isomeric all-hydrocarbon molecular receptors for fullerene separation

A new all-hydrocarbon macrocycle, cyclo[8](1,3-(4,6-dimethyl)benzene) (CDMB-8) has been reported. As prepared, it exists in Cs symmetry and shows no interaction with fullerenes (e.g., C60 or C70). High temperature (573 K) treatment induces thermal conversion of the material to an isomeric conformer with D4d symmetry as a receptor for fullerene separation.

Guest Controlled Pillar[5]arene and Polyoxometalate Based Two-Dimensional Nanostructures toward Reversible Iodine Capture

The two-dimensional (2D) nanostructures comprised of polyoxometalate based building blocks are of great value in nanoarchitectures, which have unique properties and widespread potential applications, but it is still challenging in mature preparation. Herein a new strategy to build Cr(III) centered Anderson type polyoxometalate 2D nanostructures based on the modulation of host-guest interaction between cationic pillar[5]arenes and sodium dodecyl sulfonate (SDS) in aqueous media was exploited in this work. Through regulating stoichiometry of SDS, the morphology of assemblies vary from nanobones to 2D nanosheets. The fine assembled structure was discovered by combined ¹H NMR, SAXS, and element analyses. The nanomaterials can be used as adsorbents for I₂ in various solutions, including n-hexane, cyclohexane, water, and chloroform, where the polyoxometalates play a key role in the effective adsorption of iodine since they can expand the interspace between pillar[5]arenes in the as-prepared nanostructure. Furthermore, such adsorbents are easily regenerated and reused as iodine can be released spontaneously from nanobones@I₂ and nanosheets@I₂ solids when being immersed in dimethyl sulfoxide.

Supramolecular vesicles based on pillar[n]arenes: design, construction, and applications

Supramolecular vesicles have attracted considerable attention due to their advantages of facile construction, high-cargo-loading capacity, and good biocompatibility. Pillar[n]arenes are a unique family of supramolecular macrocycles, exhibiting excellent features and broad applications due to their intrinsic topology and high functionality. In the past decade, the construction of pillar[n]arene-based supramolecular vesicles has been continuously attempted and developed rapidly. In this review, we mainly summarize the significant advancements of such supramolecular vesicles in the last three years. By showing some representative examples, the design strategies, construction methods, and potential applications of these dynamic nanocarriers are discussed in detail. In particular, the responsiveness of such vesicles to various external stimuli and their applications in drug delivery are highlighted. The outstanding performance of pillar[n]arene-based supramolecular vesicles would definitely enrich the family of supramolecular vesicles and promote the development of dynamic supramolecular materials.