Dual-Mode Ultrasensitive Quantification of MicroRNA in Living Cells by Chiroplasmonic Nanopyramids Self-Assembled from Gold and Upconversion Nanoparticles

Quantification of multiple microRNAs by microchip electrophoresis assisted by strand displacement amplification

MicroRNAs (miRNAs) are increasingly recognized as potential biomarkers for the early diagnosis of cancer. However, the concurrent detection of multiple miRNAs in biological samples presents a significant challenge due to their high homogeneity and low abundance. This study introduced a novel approach combining strand displacement amplification (SDA) with microchip electrophoresis (MCE) for the simultaneous quantitation of trace levels of three miRNAs associated with cancer: miRNA-21, miRNA-145, and miRNA-221. Specifically designed probes were utilized to selectively capture the target miRNAs, thereby initiating the SDA process in a single solution without cross-interference. Under optimized conditions, the SDA-MCE method achieved the limit of detection (LOD) as low as 0.02 fM (S/N = 3) and the limit of quantitation (LOQ) as low as 0.1 fM across a broad linear range spanning from 0.1 fM to 1 pM. The SDA reaction was completed in approximately 1.5 h, and all target products were separated within 135 s through MCE. Application of this method for the simultaneous detection of these three miRNAs in human lung cancer cell samples yielded satisfactory results. Featuring high sensitivity, rapid analysis, minimal reagent consumption, and straightforward operation, the proposed MCE-SDA strategy holds considerable promise for multi-miRNAs detection applications.

DNA tetrahedral molecular sieve for size-selective fluorescence sensing of miRNA 21 in living cells

In situ monitoring of intracellular microRNAs (miRNAs) often encounters the challenges of surrounding complexity, coexistence of precursor miRNAs (pre-miRNAs) and the degradation of biological enzyme in living cells. Here, we designed a novel probe encapsulated DNA tetrahedral molecular sieve (DTMS) to realize the size-selective detection of intracellular miRNA 21 that can avoid the interference of pre-miRNAs. In such strategy, quencher (BHQ-1) labeled probe DNA (S6-BHQ 1) was introduced into the inner cavity of fluorophore (FAM) labeled DNA tetrahedral scaffolds (DTS) to prepare DTMS, making the FAM and BHQ-1 closely proximate, and resulting the sensor in a "signal-off" state. In the presence of miRNA 21, strand displacement reaction happened to form more stable DNA double-stranded structure, accompanied by the release of S6-BHQ 1 from the inner cavity of DTMS, making the sensor in a "signal-on" state. The DTMS based sensing platform can then realized the size-selective detection of miRNA 21 with a detection limit of 3.6 pM. Relying on the mechanical rigidity of DTS and the encapsulation of DNA probe using DTMS, such proposed method achieved preferable reproducibility and storage stability. Moreover, this sensing system exhibited good performance for monitoring the change of intracellular miRNA 21 level during the treatment with miRNA-related drugs, demonstrating great potential for biological studies and accurate disease diagnosis.

Upconversion-based chiral nanoprobe for highly selective dual-mode sensing and bioimaging of hydrogen sulfide in vitro and in vivo

Chiral assemblies have become one of the most active research areas due to their versatility, playing an increasingly important role in bio-detection, imaging and therapy. In this work, chiral UCNPs/CuxOS@ZIF nanoprobes are prepared by encapsulating upconversion nanoparticles (UCNPs) and CuxOS nanoparticles (NPs) into zeolitic imidazolate framework-8 (ZIF-8). The novel excited-state energy distribution-modulated upconversion nanostructure (NaYbF4@NaYF4: Yb, Er) is selected as the fluorescence source and energy donor for highly efficient fluorescence resonance energy transfer (FRET). CuxOS NP is employed as chiral source and energy acceptor to quench upconversion luminescence (UCL) and provide circular dichroism (CD) signal. Utilizing the natural adsorption and sorting advantages of ZIF-8, the designed nanoprobe can isolate the influence of other common disruptors, thus achieve ultra-sensitive and highly selective UCL/CD dual-mode quantification of H2S in aqueous solution and in living cells. Notably, the nanoprobe is also capable of in vivo intra-tumoral H2S tracking. Our work highlights the multifunctional properties of chiral nanocomposites in sensing and opens a new vision and idea for the preparation and application of chiral nanomaterials in biomedical and biological analysis.

An extracellular vesicle microRNA-initiated 3D DNAzyme motor for colorectal cancer diagnosis

MicroRNA is regarded as a significant biomarker for cancer diagnosis, disease process evaluation and therapeutic guidance, and dual-parameter measurement may contribute to a more accurate and realistic assessment. To meet the urgent need for simultaneous detection of multiple biomarkers, we combined three-dimensional DNAzyme motors with single molecule imaging technique to construct a convenient, intuitive, and sensitive approach for the simultaneous detection of dual miRNAs in the free state or in extracellular vesicles. Quantification of target miRNAs can be realized through the detection of amplified fluorescence signals generated by the target miRNA-initiated cleavage of fluorescent substrate strands by the DNAzyme motors. The practicability was systematically validated with microRNA-21-5p and microRNA-10b-5p as targets, acquiring a satisfactory sensitivity sufficient to detect low abundance targets at 0.5 or 1 pM to 100 pM. Besides, the extracellular vesicular miRNAs can be conveniently detected without extraction. The clinical applicability was verified with a series of extracellular vesicles from clinical samples, which exhibited good distinguishability between colorectal cancer patients and healthy donors. In addition to the advantages of good specificity and high sensitivity, the system has potential to be easily adapted by minor alteration of the DNA sequences and fluorophore sets for detection of multiple miRNAs and even other types of biomarkers such as proteins. Therefore, it shows promise to be widely applied in various fields such as early diagnosis of cancer and its prognostic assessment.

Endogenous mRNA-Driven "One-To-More" Signal Amplification of DNA Probe for Intracellular miR155 Sensing

The detection of specific intracellular microRNAs could be potentially helpful in understanding the underlying mechanisms of cancer metastasis and invasion. MiRNAs are usually present in lower expression levels, especially in early stage of cancer. Here, we proposed a "one-to-more" amplification strategy for miRNA imaging, by virtue of DNA strand displacements with dual-amplification. This approach involves leveraging high-abundance endogenous mRNA as fuel strand to drive cascade reactions between DNA strands for amplification, enabling the monitoring of low-abundance intracellular microRNA155. Notably, in comparison to the traditional "one-to-one" signal triggering mode, our "one-to-more" amplification strategy led to a remarkable 11.8-fold increase in fluorescence signal. Our approach not only demonstrates a high sensitivity and specificity in detecting miR155, but also allows for discrimination of miR155 expression levels in different cell lines. With the advantages of intracellular signal amplification and reduced background signal, this approach holds substantial potential in the early diagnosis of cancer.

Pushing Trap-Controlled Persistent Luminescence Materials toward Multi-Responsive Smart Platforms: Recent Advances, Mechanism, and Frontier Applications

Smart stimuli-responsive persistent luminescence materials, combining the various advantages and frontier applications prospects, have gained booming progress in recent years. The trap-controlled property and energy storage capability to respond to external multi-stimulations through diverse luminescence pathways make them attractive in emerging multi-responsive smart platforms. This review aims at the recent advances in trap-controlled luminescence materials for advanced multi-stimuli-responsive smart platforms. The design principles, luminescence mechanisms, and representative stimulations, i.e., thermo-, photo-, mechano-, and X-rays responsiveness, are comprehensively summarized. Various emerging multi-responsive hybrid systems containing trap-controlled luminescence materials are highlighted. Specifically, temperature dependent trapping and de-trapping performance is discussed, from extreme-low temperature to ultra-high temperature conditions. Emerging applications and future perspectives are briefly presented. It is hoped that this review would provide new insights and guidelines for the rational design and performance manipulation of multi-responsive materials for advanced smart platforms.

Intelligent Reconfiguration-Promoted Cellular Internalization of Core-Shell DNA Nanoprobe Equipped with Successive Dual Stimuli-Responsive Protective Satellites for Amplification Fluorescence Imaging of Tumor Cells

Although DNA probes have attracted increasing interest for precise tumor cell identification by imaging intracellular biomarkers, the requirement of commercial transfection reagents, limited targeting ligands, and/or non-biocompatible inorganic nanostructures has hampered the clinic translation. To circumvent these shortcomings, a reconfigurable ES-NC (Na+-dependent DNAzyme (E)-based substrate (S) cleavage core/shell DNA nanocluster (NC)) entirely from DNA strands is assembled for precise imaging of cancerous cells in a successive dual-stimuli-responsive manner. This nanoprobe is composed of a strung DNA tetrahedral satellites-based protective (DTP) shell, parallelly aligned target-responsive sensing (PTS) interlayer, and hydrophobic cholesterol-packed innermost layer (HCI core). Tetrahedral axial rotation-activated reconfiguration of DTP shell promotes the exposure of interior hydrophobic moieties, enabling cholesterol-mediated cellular internalization without auxiliary elements. Within cells, over-expressed glutathione triggers the disassembly of the DTP protective shell (first stimulus), facilitating target-stimulated signal transduction/amplification process (second stimuli). Target miRNA-21 is detected down to 10.6 fM without interference from coexisting miRNAs. Compared with transfection reagent-mediated counterpart, ES-NC displays a higher imaging ability, resists nuclease degradation, and has no detectable damage to healthy cells. The blind test demonstrates that the ES-NC is suitable for the identification of cancerous cells from healthy cells, indicating a promising tool for early diagnosis and prediction of cancer.

Expanding the Role of Chiral Drugs and Chiral Nanomaterials as a Potential Therapeutic Tool

Chirality, the property of molecules having mirror-image forms, plays a crucial role in pharmaceutical and biomedical research. This review highlights its growing importance, emphasizing how chiral drugs and nanomaterials impact drug effectiveness, safety, and diagnostics. Chiral molecules serve as precise diagnostic tools, aiding in accurate disease detection through unique biomolecule interactions. The article extensively covers chiral drug applications in treating cardiovascular diseases, CNS disorders, local anesthesia, anti-inflammatories, antimicrobials, and anticancer drugs. Additionally, it explores the emerging field of chiral nanomaterials, highlighting their suitability for biomedical applications in diagnostics and therapeutics, enhancing medical treatments.

Ultrasensitive upconverting nanoprobes for in situ imaging of drug-induced liver injury using miR-122 as the biomarker

Drug-induced liver injury (DILI) is a frequent adverse drug reaction. The current clinical diagnostic methods are inadequate for accurate and early detection of DILI due to the lack of effective diagnostic biomarkers. Hepatocyte-specific miR-122 is released from injured hepatocytes promptly and its efflux is significantly correlated with the progression of DILI. Therefore, achieving precise in situ detection of miR-122 with high sensitivity is vital for early visualization of DILI. Herein, a new nanoprobe, consisting of miR-122 aptamer, upconversion nanoparticles (UCNPs) and Prussian blue nanoparticles (PBNPs) was introduced for the early and sensitive detection of DILI in situ. As the nanoprobes reached in the liver, miR-122 aptamer-based entropy-driven strand displacement (ESDR) signal amplification reaction was triggered and luminescence resonance energy transfer (LRET) between UCNPs and PBNPs was responded to achieve the high-fidelity detection of DILI. A negative correlation was observed between the intensity of upconversion luminescence (UCL) and the concentration of miR-122. UCL imaging conducted both in vivo and ex vivo indicated that a reduction in miR-122 concentration led to an increase in UCL intensity, revealing a precise state of DILI. The detection technique demonstrated a positive correlation between signal intensity and severity, offering a more straightforward and intuitive method of visualizing DILI.

Structural and Electronic Chirality in Inorganic Crystals: from Construction to Application

Chirality represents a fundamental characteristic inherent in nature, playing a pivotal role in the emergence of homochirality and the origin of life. While the principles of chirality in organic chemistry are well-documented, the exploration of chirality within inorganic crystal structures continues to evolve. This ongoing development is primarily due to the diverse nature of crystal/amorphous structures in inorganic materials, along with the intricate symmetrical and asymmetrical relationships in the geometry of their constituent atoms. In this review, we commence with a summary of the foundational concept of chirality in molecules and solid states matters. This is followed by an introduction of structural chirality and electronic chirality in three-dimensional and two-dimensional inorganic materials. The construction of chirality in inorganic materials is classified into physical photolithography, wet-chemistry method, self-assembly, and chiral imprinting. Highlighting the significance of this field, we also summarize the research progress of chiral inorganic materials for applications in optical activity, enantiomeric recognition and chiral sensing, selective adsorption and enantioselective separation, asymmetric synthesis and catalysis, and chirality-induced spin polarization. This review aims to provide a reference for ongoing research in chiral inorganic materials and potentially stimulate innovative strategies and novel applications in the realm of chirality.

Face-to-face Assembly Strategy of Au Nanocubes: Induced Generation of Broad Hotspot Regions for SERS-Fluorescence Dual-Signal Detection of Intracellular miRNAs

While designing anisotropic noble metal nanoparticles (NPs) can enhance the signal intensity of Raman dyes, more sensitive surface-enhanced Raman scattering (SERS) probes can be designed by oriented self-assembly of noble metal nanomaterials into dimers or higher-order nanoclusters. In this study, we engineered a self-assembly strategy in living cells for real-time fluorescence and SERS dual-channel detection of intracellular microRNAs (miRNAs), using Mg2+-dependent 8-17E DNAzyme sequences as the driving motors, gold nanocubes (AuNCs) as the driver components, and three-branched double-stranded DNA as the linking tool. The assembly selects adenine in DNA as a reporter molecule, simplifying the labeling process of Raman reporter molecules and reducing the synthesis process. In addition, adenine is stably distributed between the faces of AuNCs and the wide hotspot region gives good reproducibility of the adenine SERS signal. In this strategy, the SERS channel was consistently stable and more sensitive compared to the fluorescence channel. Among them, the detection limit of the SERS channel was 2.1 pM and the coefficient of variation was 1.26% in the in vitro liquid phase and 1.49% in MCF-7 cells. The strategy successfully achieved accurate tracking and quantification of miRNA-21 in cancer cells, showing good reproducibility in complex samples as well as cells. The reported strategy provides ideas for exploring intracellular specific triggering of nanoparticles for precise control of self-assembly.

A versatile upconversion-based multimode lateral flow platform for rapid and ultrasensitive detection of microRNA towards health monitoring

MicroRNAs are small single-stranded RNA molecules associated with gene expression and immune response, suggesting their potential as biomarkers for health monitoring. Herein, we designed a novel upconversion-based multimode lateral flow assay (LFA) system to detect microRNAs in body fluids by simultaneously producing three unique signals within a detection strip. The core-shell Au-DTNB@Ag nanoparticles act as both the Raman reporters and acceptors, quenching fluorescence from upconversion nanoparticles (UCNPs, NaYF4: Yb3+, Er3+) via the Förster resonance energy transfer mechanism. Using microRNA-21 as a representative analyte, the LFA system offers remarkable detection range from 2 nM to 1 fM, comparable to outcomes from signal amplification methods, due to the successful single-layer self-assembly of UCNPs on the NC membrane, which greatly enhances both the convenience and sensitivity of the LFA technique. Additionally, our proprietary fluorescence-Raman detection platform simplifies result acquisition by reducing procedural intricacies. The biosensor, when evaluated with diverse bodily fluids, showed remarkable selectivity and sustained stability. Importantly, our LFA biosensor effectively identified periodontitis and lung cancer patients from healthy subjects in genuine samples, indicating significant potential for disease prediction, early diagnosis, and progression tracking. This system holds promise as a multifunctional tool for various biomarker assays.

High-Throughput Morphological Chirality Quantification of Twisted and Wrinkled Gold Nanorods

Chirality in gold nanostructures offers an exciting opportunity to tune their differential optical response to left- and right-handed circularly polarized light, as well as their interactions with biomolecules and living matter. However, tuning and understanding such interactions demands quantification of the structural features that are responsible for the chiral behavior. Electron tomography (ET) enables structural characterization at the single-particle level and has been used to quantify the helicity of complex chiral nanorods. However, the technique is time-consuming and consequently lacks statistical value. To address this issue, we introduce herein a high-throughput methodology that combines images acquired by secondary electron-based electron beam-induced current (SEEBIC) with quantitative image analysis. As a result, the geometric chirality of hundreds of nanoparticles can be quantified in less than 1 h. When combining the drastic gain in data collection efficiency of SEEBIC with a limited number of ET data sets, a better understanding of how the chiral structure of individual chiral nanoparticles translates into the ensemble chiroptical response can be reached.

Modulation by Co (II) Ion of Optical Activities of L/D-glutathione (GSH)-modified Chiral Copper Nanoclusters for Sensitive Adenosine Triphosphate Detection

Chiral nanoscale enantiomers exhibit different biological effects in living systems. However, their chirality effect on the detection sensitivity for chiral biological targets still needs to be explored. Here, we discovered that Co2+ can modulate the luminescence performance of L/D-glutathione (GSH)-modified copper nanoclusters (L/D-Cu NCs) and induce strong chiroptical activities as the asymmetric factor was enhanced 223-fold with their distribution regulating from the ultraviolet to visible region. One Co2+ coordinated with two GSH molecules that modified on the surface of Cu NCs in the way of CoN2O2. On this basis, dual-modal chiral and luminescent signals of Co2+ coordinated L/D-Cu NCs (L/D-Co-Cu NCs) were used to detect the chiral adenosine triphosphate (ATP) based on the competitive interaction between surficial GSH and ATP molecules with Co2+. The limits of detection of ATP obtained with fluorescence and circular dichroism intensity were 9.15 μM and 15.75 nM for L-Co-Cu NCs, and 5.35 μM and 4.69 nM for D-Co-Cu NCs. This demonstrated that selecting suitable chiral configurations of nanoprobes effectively enhances detection sensitivity. This study presents not only a novel method to modulate and enhance the chiroptical activity of nanomaterials but also a unique perspective of chirality effects on the detection performances for bio-targets.

Chiral Nanomaterials for Cancer Vaccines

Chirality is a fundamental characteristic of living organisms and is commonly observed at the biomolecule, cellular, and tissue levels. Chiral nanomaterials play an irreplaceable role in nanomedicine and nanobiology because of their unique enantioselectivity with biological components. Here, research progress relating to chiral nanomaterials in the field of vaccines is reviewed, including antigen presenting systems, immune adjuvants, and cancer vaccines. First, the common synthesis methods are outlined for different types of chiral nanomaterials, as well as their chiral sources, optical properties, and potential biological applications. Then, the application of chiral nanomaterials are discussed in the field of vaccines with reference to the promotion of antigen presentation and activation of the immune system for tumor immunotherapy. Finally, the current obstacles and future research directions of chiral nanomaterials are revealed with regard to regulating the immune system.

Wavelength-Tuneable Fluorescent Carbon Dots for Nucleic Acid Imaging

Nucleic acid is one of the most important substances in organisms, and its dynamic changes are closely related to physiological processes. Nucleic acid labeling is conducive to providing important information for the early diagnosis and treatment of pathophysiological processes. Here, we utilized the transfer mechanism between carbon sources and CDs to synthesize wavelength-adjustable N-CDs for the nucleic acid image. Along with the increased graphite nitrogen (from 10.6 to 30.1%) gradually by the precise design of the nitrogen structure in carbon sources (e.g., primary amines, secondary amines, tertiary amines, and liking graphite-nitrogen), the energy gap of CDs reduced, resulting in adjustable wavelength from visible to near-infrared range (from 461 nm/527 nm to 650 nm/676 nm). Furthermore, N-CDs exhibited a selective affinity for nucleic acids, especially RNA. Therefore, N-CDs support an efficient platform for real-time tracking of RNA dynamic changes in cells.

Magnetic Assembly of Eu-Doped NaYF4 Nanorods for Field-Responsive Linearly and Circularly Polarized Luminescence

Colloidal assembly has emerged as an effective avenue for achieving polarized light emission. Here, we showcase the efficacy and versatility of the magnetic colloidal assembly in enabling both linearly and circularly polarized luminescence. Colloidal europium-doped NaYF4 nanorods with surface-bound Fe3O4 nanoparticles are magnetically assembled into linear or chiral superstructures using corresponding fields created in permanent magnets. In a uniform magnetic field generated by opposing poles, the assemblies exhibit photoluminescence with intensity tunable in response to the magnetic field direction, which is higher when the nanorods are perpendicular to light propagation than when they are parallel. The obtained superstructures display strong linearly polarized luminescence when the nanorods are aligned vertically, exhibiting a high degree of polarization up to 0.61. In a quadrupole chiral field generated by permanent magnets, the assemblies emit left-handed or right-handed polarized light depending on the position of the sample placement, attaining a g-factor of 0.04. Furthermore, the superstructures immobilized in a hydrogel film are found to retain their chirality, exhibiting opposite chiroptical responses depending on the sample orientation. The magnetic colloidal assembly approach facilitates the convenient and efficient generation of polarized light emissions from nonmagnetic luminescent materials, thus creating opportunities for tailoring light behavior in developing innovative optoelectronic devices.

Remotely Activated DNA Probe System for the Detection and Imaging of Dual miRNAs

Cancers remain the leading cause of mortality worldwide. It is crucial to detect cancer at an early stage for improving survival rates. Biomarkers have precise implications for cancer progression. Here, we built a straightforward DNA probe system that could be activated by near-infrared light to detect dual miRNAs with a high specificity. This probe is built on the basis of upconversion nanoparticles, which could emit ultraviolet light and activate DNA probes adsorbed on the outer layer. The DNA probe system is remotely controlled through manipulation of the near-infrared (NIR) light, enabling simultaneous detection of dual miRNAs. The DNA nanosystem could be effectively endocytosed by cancer cells and reflect expression levels of dual miRNAs. Overall, this study demonstrates a promising remote-controlled DNA nanoplatform for the simultaneous detection of dual miRNAs, which has tremendous potential for precise cancer diagnostics and therapies.

Highly sensitive detection of circulating tumour cells based on an ASV/CV dual-signal electrochemical strategy

Circulating tumour cells (CTCs), as a tumour marker, may provide more information in early diagnosis and accurate therapy of cancer patients. Electrochemical detection of CTCs has exhibited exceptional advantages. However, single-signal electrochemical detection usually has a high probability of false positives coming from interferents, operating personnel, and nonstandard analytical processes. Herein, a dual-signal strategy using anodic stripping voltammetry (ASV) and cyclic voltammetry (CV) for highly sensitive detection of CTCs was developed. When MCF-7 cells were present, aptamer DNA (DNA1)-magnetic beads (MBs) were captured by CTCs and detached from the biosensing electrodes. Following magnetic separation, polystyrene bead (PS)-CdS QDs labelled on MCF-7 cells were dissolved by HNO3 and the intensity of the oxidation peak current of Cd2+ ions was proportional to the amount of MCF-7 cells in ASV (y = 6.8929 lg Ccells + 1.0357 (Ccells, cells per mL; R2, 0.9947; LOD, 3 cells per mL)). Meanwhile, the anodic peak currents of the remaining electrode in CV were also proportional to the amount of MCF-7 cells (y = 3.7891 lg Ccells + 52.3658 (Ccells, cells per mL; R2, 0.9846; LOD, 3 cells per mL)). An ASV/CV dual-signal biosensor for electrochemical detection of CTCs was achieved, which overcame the limitations of any single-signal mode and improved the detection reliability and precision.

Chiral probes for biosensing

Chiral inorganic nanomaterials have emerged as a highly promising area of research in nanoscience due to their exceptional light-matter interaction and vast potential applications in chiral sensing, asymmetric catalysis, enantiomer separation, and negative-index materials. We present an overview of the latest advances in chiral inorganic nanomaterials including chiral individual nanoparticles, chiral assemblies, and chiral film-based sensors over the past ten years. Additionally, we discuss the challenges and future perspectives for developing chiral nanomaterials in biosensing applications.

Self-accelerated DNA walker mediated electrochemical biosensor for rapid and ultrasensitive detection of microRNA

Herein, we developed a novel three-dimensional (3D) self-accelerated DNA walker (SADW) which progressively expedite walking rate by unlocking the more walking arm continuously in walker process to construct electrochemical biosensor for ultrasensitive detection of microRNA. Particularly, we skillfully introduced a target analogue sequence in the double-loop hairpin, which could be released in the walking process of SADW, then rapidly activating more silenced walking strands to achieve the continuous self-acceleration, resulting in the expedited reaction rate. Surprisingly, the average reaction rate of SADW was quite higher than that of traditional 3D self-circulating DNA walkers (DW) under pretty low target miRNA concentration, which is ascribed to the outstanding acceleration process of the SADW, readily conquering the major predicaments of DW in detecting target with traces concentration: slow reaction rate and low sensitivity. This way, the elaborated SADW is favorably applied in the ultrasensitive and rapid detection of miRNA-21 in tumor cancer cell lysates with a detection limit down to 5.81 aM which was far from lower than the detection limit of DW. This approach develops the novel generation of widespread strategy for the applications in clinic diagnose, biosensing assay, and DNA nanobiotechnology.

Chiral Inorganic Nanomaterials for Photo(electro)catalytic Conversion

Chiral inorganic nanomaterials due to their unique asymmetric nanostructures have gradually demonstrated intriguing chirality-dependent performance in photo(electro)catalytic conversion, such as water splitting. However, understanding the correlation between chiral inorganic characteristics and the photo(electro)catalytic process remains challenging. In this perspective, we first highlight the chirality source of inorganic nanomaterials and briefly introduce photo(electro)catalysis systems. Then, we delve into an in-depth discussion of chiral effects exerted by chiral nanostructures and their photo-electrochemistry properties, while emphasizing the emerging chiral inorganic nanomaterials for photo(electro)catalytic conversion. Finally, the challenges and opportunities of chiral inorganic nanomaterials for photo(electro)catalytic conversion are prospected. This perspective provides a comprehensive overview of chiral inorganic nanomaterials and their potential in photo(electro)catalytic conversion, which is beneficial for further research in this area.

Proximity-Driven DNA Nanosensors

In proximity-driven sensing, interactions between a probe and an analyte produce a detectable signal by causing a change in distance of two probe components or signaling moieties. By interfacing such systems with DNA-based nanostructures, platforms that are highly sensitive, specific, and programmable can be designed. In this Perspective, we delineate the advantages of using DNA building blocks in proximity-driven nanosensors and provide an overview of recent progress in the field, from sensors that rapidly detect pesticides in food to probes that identify rare cancer cells in blood. We also discuss current challenges and identify key areas that need further development.

Entropy-driven DNA circuit with two-stage strand displacement for elegant and robust detection of miRNA let-7a

MicroRNAs (miRNAs) research in cancer diagnosis is expanding, on account of miRNAs were demonstrated to be key indicator of gene expression and hopeful candidates for biomarkers. In this study, a stable miRNA-let-7a fluorescent biosensor was successfully designed based on an exonuclease Ⅲ-assisted two-stage strand displacement reaction (SDR). First, an entropy-driven SDR containing a three-chain structure of the substrate is used in our designed biosensor, leading to reduce the reversibility of the target recycling process in each step. The target acts on the first stage to start the entropy-driven SDR, which generates the trigger used to stimulate the exonuclease Ⅲ-assisted SDR in the second stage. At the same time, we design a SDR one-step amplification strategy as a comparison. Expectly, this developed two-stage strand displacement system has a low detection limit of 25.0 pM as well as a broad detection range of 4 orders of magnitude, making it more sensitive than the SDR one-step sensor, whose detection limit is 0.8 nM. In addition, this sensor has high specificity across members of the miRNA family. Therefore, we can take advantage of this biosensor to promote miRNA research in cancer diagnosis sensing systems.

Molecular Recognition-Modulated Hetero-Assembly of Nanostructures for Visualizable and Portable Detection of Circulating miRNAs

Biomolecular markers, particularly circulating microRNAs (miRNAs) play an important role in diagnosis, monitoring, and therapeutic intervention of cancers. However, existing detection strategies remain intricate, laborious, and far from being developed for point-of-care testing. Here, we report a portable colorimetric sensor that utilizes the hetero-assembly of nanostructures driven by base pairing and recognition for direct detection of miRNAs. Following hybridization, two sizes of nanoparticles modified with single-strand DNA can be robustly assembled into heterostructures with strong optical resonance, exhibiting distinct structure colors. Particularly, the large nanoparticles are first arranged into nanochains to enhance scattering signals of small nanoparticles, which allows for sensitive detection and quantification of miRNAs without the requirement of target extraction, amplification, and fluorescent labels. Furthermore, we demonstrate the high specificity and single-base selectivity of testing different miRNA samples, which shows great potential in the diagnosis, staging, and monitoring of cancers. These heterogeneous assembled nanostructures provide an opportunity to develop simple, fast, and convenient tools for miRNAs detection, which is suitable for many scenarios, especially in low-resource setting.

Three-Dimensional CHA-HCR System Using DNA Nanospheres for Sensitive and Rapid Imaging of miRNA in Live Cells and Tissues

Isothermal, enzyme-free amplification techniques, such as the hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA), have gained increasing attention for miRNA analysis. However, current methodological challenges, including slow kinetics, low amplification efficiency, difficulties in efficient cellular internalization of DNA probes, and concerns regarding the intracellular stability of nucleic acids, need to be addressed. To this end, we propose a novel strategy for sensitive miRNA detection based on a three-dimensional (3D) CHA-HCR system. This system comprises two DNA nanospheres, named DS-13 and DS-24, which are functionalized with CHA and HCR hairpins. Target miR-21 initiates CHA between the two nanospheres, thereby activating downstream HCR and bringing cyanine 3 (Cy3) and cyanine 5 (Cy5) into proximity. The 3D CHA-HCR process leads to the formation of large DNA aggregates and the generation of fluorescence resonance energy transfer signals. In this strategy, the employment of a cascaded reaction and spatial confinement effect improve sensitivity and kinetics, while the use of DNA nanocarriers facilitates cellular delivery and protects nucleic acid probes. The experimental results in vitro, in living cells, and in clinical tissue samples demonstrated the desirable sensing performance. Collectively, this approach holds promise as a valuable tool for cancer diagnosis and biomedical research.

Chirality in Light-Matter Interaction

The scientific effort to control the interaction between light and matter has grown exponentially in the last 2 decades. This growth has been aided by the development of scientific and technological tools enabling the manipulation of light at deeply sub-wavelength scales, unlocking a large variety of novel phenomena spanning traditionally distant research areas. Here, the role of chirality in light-matter interactions is reviewed by providing a broad overview of its properties, materials, and applications. A perspective on future developments is highlighted, including the growing role of machine learning in designing advanced chiroptical materials to enhance and control light-matter interactions across several scales.

DNA Assembly of Plasmonic Nanostructures Enables In Vivo SERS-Based MicroRNA Detection and Tumor Photoacoustic Imaging

Controllable self-assembly of the DNA-linked gold nanoparticle (AuNP) architecture for in vivo biomedical applications remains a key challenge. Here, we describe the use of the programmed DNA tetrahedral structure to control the assembly of three different types of AuNPs (∼20, 10, and 5 nm) by organizing them into defined positioning and arrangement. A DNA-assembled "core-satellite" architecture is built by DNA sequencing where satellite AuNPs (10 and 5 nm) surround a central core AuNP (20 nm). The density and arrangement of the AuNP satellites around the core AuNP were controlled by tuning the size and amount of the DNA tetrahedron functionalized on the core AuNPs, resulting in strong electromagnetic field enhancement derived from hybridized plasmonic coupling effects. By conjugating with the Raman molecule, strong surface-enhanced Raman scattering photoacoustic imaging signals could be generated, which were able to image microRNA-21 and tumor tissues in vivo. These results provided an efficient strategy to build precision plasmonic superstructures in plasmonic-based bioanalysis and imaging.

A magnetic assembly approach to chiral superstructures

Colloidal assembly into chiral superstructures is usually accomplished with templating or lithographic patterning methods that are only applicable to materials with specific compositions and morphologies over narrow size ranges. Here, chiral superstructures can be rapidly formed by magnetically assembling materials of any chemical compositions at all scales, from molecules to nano- and microstructures. We show that a quadrupole field chirality is generated by permanent magnets caused by consistent field rotation in space. Applying the chiral field to magnetic nanoparticles produces long-range chiral superstructures controlled by field strength at the samples and orientation of the magnets. Transferring the chirality to any achiral molecules is enabled by incorporating guest molecules such as metals, polymers, oxides, semiconductors, dyes, and fluorophores into the magnetic nanostructures.

Intrinsic Optical Properties and Emerging Applications of Gold Nanostructures

The collective oscillation of free electrons at the nanoscale surface of gold nanostructures is closely modulated by tuning the size, shape/morphology, phase, composition, hybridization, assembly, and nanopatterning, along with the surroundings of the plasmonic surface located at a dielectric interface with air, liquid, and solid. This review first introduces the physical origin of the intrinsic optical properties of gold nanostructures and further summarizes stimuli-responsive changes in optical properties, metal-field-enhanced optical signals, luminescence spectral shaping, chiroptical response, and photogenerated hot carriers. The current success in the landscape of nanoscience and nanotechnology mainly originates from the abundant optical properties of gold nanostructures in the thermodynamically stable face-centered cubic (fcc) phase. It has been further extended by crystal phase engineering to prepare thermodynamically unfavorable phases (e.g., kinetically stable) and heterophases to modulate their intriguing phase-dependent optical properties. A broad range of promising applications, including but not limited to full-color displays, solar energy harvesting, photochemical reactions, optical sensing, and microscopic/biomedical imaging, have fostered parallel research on the multitude of physical effects occurring in gold nanostructures.

Optimizing Upconversion Nanoparticles for FRET Biosensing

Upconversion nanoparticles (UCNPs) are some of the most promising nanomaterials for bioanalytical and biomedical applications. One important challenge to be still solved is how UCNPs can be optimally implemented into Förster resonance energy transfer (FRET) biosensing and bioimaging for highly sensitive, wash-free, multiplexed, accurate, and precise quantitative analysis of biomolecules and biomolecular interactions. The many possible UCNP architectures composed of a core and multiple shells doped with different lanthanoid ions at different ratios, the interaction with FRET acceptors at different possible distances and orientations via biomolecular interaction, and the many and long-lasting energy transfer pathways from the initial UCNP excitation to the final FRET process and acceptor emission make the experimental determination of the ideal UCNP-FRET configuration for optimal analytical performance a real challenge. To overcome this issue, we have developed a fully analytical model that requires only a few experimental configurations to determine the ideal UCNP-FRET system within a few minutes. We verified our model via experiments using nine different Nd-, Yb-, and Er-doped core-shell-shell UCNP architectures within a prototypical DNA hybridization assay using Cy3.5 as an acceptor dye. Using the selected experimental input, the model determined the optimal UCNP out of all theoretically possible combinatorial configurations. An extreme economy of time, effort, and material was accompanied by a significant sensitivity increase, which demonstrated the powerful feat of combining a few selected experiments with sophisticated but rapid modeling to accomplish an ideal FRET biosensor.

High-Efficiency 3D DNA Walker Immobilized by a DNA Tetrahedral Nanostructure for Fast and Ultrasensitive Electrochemical Detection of MiRNA

Herein, by directly limiting the reaction space, an ingenious three-dimensional (3D) DNA walker (IDW) with high walking efficiency is developed for rapid and sensitive detection of miRNA. Compared with the traditional DNA walker, the IDW immobilized by the DNA tetrahedral nanostructure (DTN) brings stronger kinetic and thermodynamic favorability resulting from its improved local concentration and space confinement effect, accompanied by a quite faster reaction speed and much better walking efficiency. Once traces of target miRNA-21 react with the prelocked IDW, the IDW could be largely activated and walk on the interface of the electrode to trigger the cleavage of H2 with the assistance of Mg²⁺, resulting in the release of amounts of methylene blue (MB) labeled on H2 from the electrode surface and the obvious decrease of the electrode signal. Impressively, the IDW reveals a conversion efficiency as high as 9.33 × 10⁸ in 30 min with a much fast reaction speed, which is at least five times beyond that of typical DNA walkers. Therefore, the IDW could address the inherent challenges of the traditional DNA walker easily: slow walking speed and low efficiency. Notably, the IDW as a DNA nanomachine was utilized to construct a sensitive sensing platform for rapid miRNA-21 detection with a limit of detection (LOD) of 19.8 aM and realize the highly sensitive assay of biomarker miRNA-21 in the total RNA lysates of cancer cell. The strategy thus helps in the design of a versatile nucleic acid conversion and signal amplification approach for practical applications in the areas of biosensing assay, DNA nanotechnology, and clinical diagnosis.

Bioorthogonal Disassembly of Hierarchical DNAzyme Nanogel for High-Performance Intracellular microRNA Imaging

Rolling circle amplification (RCA) enables the facile construction of compact and versatile DNA nanoassemblies which are yet rarely explored for intracellular analysis. This is might be ascribed to the uncontrollable and inefficient probe integration/activation. Herein, by encoding with tandem allosteric deoxyribozyme (DNA-cleaving DNAzyme), a multifunctional RCA nanogel was established for realizing the efficient intracellular microRNA imaging via the successive activation of the RCA-disassembly module and signal amplification module. The endogenous microRNA stimulates the precise degradation of DNA nanocarriers, thus leading to the efficient exposure of RCA-entrapped DNAzyme biocatalyst for an amplified readout signal. Our bioorthogonal DNAzyme disassembly strategy achieved the robust analysis of intracellular biomolecules, thus showing more prospects in clinical diagnosis.

Chiral inorganic nanomaterials for biological applications

Chiral nanomaterials in biology play indispensable roles in maintaining numerous physiological processes, such as signaling, site-specific catalysis, transport, protection, and synthesis. Like natural chiral nanomaterials, chiral inorganic nanomaterials can also be established with similar size, charge, surface properties, and morphology. However, chiral inorganic nanomaterials usually exhibit extraordinary properties that are different from those of organic materials, such as high g-factor values, broad distribution range, and symmetrical mirror configurations. Because of these unique characteristics, there is great potential for application in the fields of biosensing, drug delivery, early diagnosis, bio-imaging, and disease therapy. Related research is summarized and discussed in this review to showcase the bio-functions and bio-applications of chiral inorganic nanomaterials, including the construction methods, classification and properties, and biological applications of chiral inorganic nanomaterials. Moreover, the deficiencies in existing studies are noted, and future development is prospected. This review will provide helpful guidance for constructing chiral inorganic nanomaterials with specific bio-functions for problem solving in living systems.

Recent advances in lanthanide-doped up-conversion probes for theranostics

Up-conversion (or anti-Stokes) luminescence refers to the phenomenon whereby materials emit high energy, short-wavelength light upon excitation at longer wavelengths. Lanthanide-doped up-conversion nanoparticles (Ln-UCNPs) are widely used in biomedicine due to their excellent physical and chemical properties such as high penetration depth, low damage threshold and light conversion ability. Here, the latest developments in the synthesis and application of Ln-UCNPs are reviewed. First, methods used to synthesize Ln-UCNPs are introduced, and four strategies for enhancing up-conversion luminescence are analyzed, followed by an overview of the applications in phototherapy, bioimaging and biosensing. Finally, the challenges and future prospects of Ln-UCNPs are summarized.

Recent advances in tumor biomarker detection by lanthanide upconversion nanoparticles

Early tumor diagnosis could reliably predict the behavior of tumors and significantly reduce their mortality. Due to the response to early cancerous changes at the molecular or cellular level, tumor biomarkers, including small molecules, proteins, nucleic acids, exosomes, and circulating tumor cells, have been employed as powerful tools for early cancer diagnosis. Therefore, exploring new approaches to detect tumor biomarkers has attracted a great deal of research interest. Lanthanide upconversion nanoparticles (UCNPs) provide numerous opportunities for bioanalytical applications. When excited by low-energy near-infrared light, UCNPs exhibit several unique properties, such as large anti-Stoke shifts, sharp emission lines, long luminescence lifetimes, resistance to photobleaching, and the absence of autofluorescence. Based on these excellent properties, UCNPs have demonstrated great sensitivity and selectivity in detecting tumor biomarkers. In this review, an overview of recent advances in tumor biomarker detection using UCNPs has been presented. The key aspects of this review include detection mechanisms, applications in vitro and in vivo, challenges, and perspectives of UCNP-based tumor biomarker detection.

Controllable Three-Dimensional DNA Nanomachine-Mediated Electrochemical Biosensing Platform for Rapid and Ultrasensitive Detection of MicroRNA

In this work, a high-efficiency controllable three-dimensional (3D) DNA nanomachine (CDNM) was reasonably developed by regulating the diameter of the core and the length of the DNAzyme cantilever, which acquired greater amplification efficiency and speedier walking rate than traditional 3D DNA nanomachines with gold nanoparticles as the cores and DNAzymes as the walking arms. Significantly, once the target miRNA-21 existed, a large number of silent DNAzymes on the CDNM could be activated by enzyme-free-target-recycling amplification (EFTRA) to achieve fast cleavage and walking on the biosensor surface under the interaction of Mg²⁺. Impressively, when the diameter of the core was 40 nm and the length of the DNAzyme cantilever was 5 nm (15 bp), the CDNM could complete the reaction process in 60 min that was at least twice shorter than those of conventional DNA nanomachines. Moreover, the designed electrochemical biosensor successfully detected target miRNA-21 at an ultrasensitive level with a wide response range (100 aM to 1 nM) and a low detection limit (33.1 aM). Therefore, the developed CDNM provides a new idea for exploring functional DNA nanomachines in the field of biosensing for applications.

Plasmonic Chiral Metasurface-Induced Upconverted Circularly Polarized Luminescence from Achiral Upconversion Nanoparticles

Chirality induction, transfer, and manipulation have aroused great interest in achiral nanomaterials. Here, we demonstrate strong upconverted circularly polarized luminescence from achiral core-shell upconversion nanoparticles (UCNPs) via a plasmonic chiral metasurface-induced optical chirality transfer. The Yb³⁺-sensitized core-shell UCNPs with good dispersity exhibit intense upconversion luminescence of Tm³⁺ and Nd³⁺ through the energy transfer process. By spin-coating the core-shell UCNPs on this chiral metasurface, strong enhancement and circular polarization modulation of upconversion luminescence can be achieved due to resonant coupling between surface plasmons and upconversion nanoparticles. In the UCNPs-on-metasurface composite, a significant upconversion luminescence enhancement can be achieved with a maximum enhancement factor of 32.63 at 878 nm and an overall enhancement factor of 11.61. The luminescence dissymmetry factor of the induced upconverted circularly polarized luminescence can reach 0.95 at the emission wavelength of 895 nm. The UCNPs-on-metasurface composite yields efficient modulation for the emission intensity and polarization of UCNPs, paving new pathways to many potential applications in imaging, sensing, and anticounterfeiting fields.

Gold-Nanoparticle-Based Chiral Plasmonic Nanostructures and Their Biomedical Applications

As chiral antennas, plasmonic nanoparticles (NPs) can enhance chiral responses of chiral materials by forming hybrid structures and improving their own chirality preference as well. Chirality-dependent properties of plasmonic NPs broaden application potentials of chiral nanostructures in the biomedical field. Herein, we review the wet-chemical synthesis and self-assembly fabrication of gold-NP-based chiral nanostructures. Discrete chiral NPs are mainly obtained via the seed-mediated growth of achiral gold NPs under the guide of chiral molecules during growth. Irradiation with chiral light during growth is demonstrated to be a promising method for chirality control. Chiral assemblies are fabricated via the bottom-up assembly of achiral gold NPs using chiral linkers or guided by chiral templates, which exhibit large chiroplasmonic activities. In describing recent advances, emphasis is placed on the design and synthesis of chiral nanostructures with the tuning and amplification of plasmonic circular dichroism responses. In addition, the review discusses the most recent or even emerging trends in biomedical fields from biosensing and imaging to disease diagnosis and therapy.

Functional Zeolitic Imidazolate Framework for Robust l-Deoxyribozyme-Based Therapy

Programmable chiral biocatalysis represents a promising therapeutic strategy for its high stereospecific control over various biotransformations (e.g., chiral Aβ isomerization) of living entities yet is rarely explored. With an extraordinary resistance to nuclease digestion, the non-natural left-handed deoxyribozyme (l-DNAzyme) therapy is constrained by inefficient delivery/release and insufficient cofactors supply. Herein, an efficient adenosine triphosphate (ATP)-stimulated disassembly of l-histidine (l-His)-integrated ZIF-8 (l-His-ZIF-8) is reported for sustaining the l-DNAzyme-amplified photodynamic therapy. This self-sufficient l-therapeutic platform can intelligently release the l-DNAzyme probe and simultaneously supply l-His DNAzyme cofactors via endogenous ATP. Then, the intrinsic microRNA-21 catalyzes the generation of robust l-DNAzyme via the catalytic hybridization reaction for activating the photosensitizer with multiplied guaranteed therapeutic operation. This l-therapeutic strategy opens up great prospects for more precise diagnosis and customized gene silencing-based therapy.

DNA-mediated dynamic plasmonic nanostructures: assembly, actuation, optical properties, and biological applications

Recent advances in DNA technology have made it possible to combine with the plasmonics to fabricate reconfigurable dynamic nanodevices with extraordinary property and function. These DNA-mediated plasmonic nanostructures have been investigated for a variety of unique and beneficial physicochemical properties and their dynamic behavior has been controlled by endogenous or exogenous stimuli for a variety of interesting biological applications. In this perspective, the recent efforts to use the DNA nanostructures as molecular linkers for fabricating dynamic plasmonic nanostructures are reviewed. Next, the actuation media for triggering the dynamic behavior of plasmonic nanostructures and the dynamic response in optical features are summarized. Finally, the applications, remaining challenges and perspectives of the DNA-mediated dynamic plasmonic nanostructures are discussed.

Upconversion nanomaterials and delivery systems for smart photonic medicines and healthcare devices

In the past decade, upconversion (UC) nanomaterials have been extensively investigated for the applications to photomedicines with their unique features including biocompatibility, near-infrared (NIR) to visible conversion, photostability, controllable emission bands, and facile multi-functionality. These characteristics of UC nanomaterials enable versatile light delivery for deep tissue biophotonic applications. Among various stimuli-responsive delivery systems, the light-responsive delivery process has been greatly advantageous to develop spatiotemporally controllable on-demand "smart" photonic medicines. UC nanomaterials are classified largely to two groups depending on the photon UC pathway and compositions: inorganic lanthanide-doped UC nanoparticles and organic triplet-triplet annihilation UC (TTA-UC) nanomaterials. Here, we review the current-state-of-art inorganic and organic UC nanomaterials for photo-medicinal applications including photothermal therapy (PTT), photodynamic therapy (PDT), photo-triggered chemo and gene therapy, multimodal immunotherapy, NIR mediated neuromodulations, and photochemical tissue bonding (PTB). We also discuss the future research direction of this field and the challenges for further clinical development.

Smart Programmable Scalable Dual-Mode Diagnostic Logic Nanoflare Strategy for Dual-Tumor Marker Detection

Compared with the single-marker detection scheme, the detection of multiple targets in the complex cell and biological environment can obtain more reliable detection results. Herein, we detected miRNA-21 and APE1 in two modes, AND and OR, respectively, based on gold nanoflares and simple logic components. In both modes, DNAzyme and APE1 can get rich fluorescence recovery results by breaking the DNA strands from the gold nanorods (AuNRs) and unquenching under different conditions. In vivo and in vitro experiments suggest that both nanoflares exhibit excellent biocompatibility and make efficient and sensitive judgments on the two targets. This strategy emphasizes the reuse nature of enzymes, and a small amount of target can generate a large amount of fluorescent signal in the logic device, which greatly reduces the detection limit when monitoring low-abundance targets. Since the short-stranded DNA component of the detection device is simple in composition and easy to program its probe sequence, it can be expanded into a detection system for the detection of other sets of related markers, which increases its potential for clinical application.

Signal Transduction Strategies for Analyte Detection Using DNA-Based Nanostructures

The use of DNA-based nanostructures as probes has led to significant advances in chemical and biological sensing, allowing the detection of analytes in complex media, the understanding of fundamental biological processes, and the ability to diagnose diseases based on molecular signatures. The utility of these structures arises both from DNA's inherent ability to selectively recognize and bind a variety of chemical species and from the unique properties observed when DNA is restructured at the nanoscale. In this Minireview, we chronicle the most commonly used signal transduction strategies that have been interfaced with various DNA-based nanostructures. We discuss the types of analytes and the detection scenarios that are sought after, delineate the advantages and disadvantages of each signaling strategy, and outline the key considerations that guide the selection of each signaling method.

Lanthanide-Doped Upconversion Luminescent Nanoparticles-Evolving Role in Bioimaging, Biosensing, and Drug Delivery

Upconverting luminescent nanoparticles (UCNPs) are "new generation fluorophores" with an evolving landscape of applications in diverse industries, especially life sciences and healthcare. The anti-Stokes emission accompanied by long luminescence lifetimes, multiple absorptions, emission bands, and good photostability, enables background-free and multiplexed detection in deep tissues for enhanced imaging contrast. Their properties such as high color purity, high resistance to photobleaching, less photodamage to biological samples, attractive physical and chemical stability, and low toxicity are affected by the chemical composition; nanoparticle crystal structure, size, shape and the route; reagents; and procedure used in their synthesis. A wide range of hosts and lanthanide ion (Ln³⁺) types have been used to control the luminescent properties of nanosystems. By modification of these properties, the performance of UCNPs can be designed for anticipated end-use applications such as photodynamic therapy (PDT), high-resolution displays, bioimaging, biosensors, and drug delivery. The application landscape of inorganic nanomaterials in biological environments can be expanded by bridging the gap between nanoparticles and biomolecules via surface modifications and appropriate functionalization. This review highlights the synthesis, surface modification, and biomedical applications of UCNPs, such as bioimaging and drug delivery, and presents the scope and future perspective on Ln-doped UCNPs in biomedical applications.

A Novel Ratiometric Electrochemical Biosensor Using Only One Signal Tag for Highly Reliable and Ultrasensitive Detection of miRNA-21

Herein, a novel ratiometric electrochemical biosensor with methylene blue (MB) as the only one signal tag was proposed for highly reliable and ultrasensitive detection of microRNA-21 (miRNA-21) under the assistance of an intelligent target-induced dual signal amplification (T-DSA). First, a small amount of target miRNA-21 could produce abundant mimic targets DNA S1 and Zn²⁺ through target-induced recycle and acid dissolution, respectively. Then, S1 triggered rolling circle amplification (RCA) to generate functional DNA nanospheres (DSP) encoded by DNAzyme and substrate sequence for loading numerous signal tag MB with a remarkable electrochemical signal (signal on), and the Zn²⁺ cofactor mediated the nonviolent DNAzyme-catalyzed cleavage of DSP to sharply release MB with obviously reduced electrochemical responses (signal off). Impressively, our strategy could controllably load and release the only signal tag MB through the well-designed DSP to effectively avoid the false positive responses caused by the non-ideal upright state of DNA probes connected to electrodes in traditional distance-dependent signal adjustment ratiometric strategies with two different signal tags. Meanwhile, with the aid of innovative T-DSA recycle and RCA-produced functional DSP, the detection sensitivity of this sensing platform was significantly improved. As a result, the proposed biosensor successfully realized highly reliable and ultrasensitive detection of miRNA-21 with a detection limit down to 26.7 aM, which shows exceptional promise in biological analysis and medical diagnosis.

Chirality at nanoscale for bioscience

In the rapidly expanding fields of nanoscience and nanotechnology, there is considerable interest in chiral nanomaterials, which are endowed with unusually strong circular dichroism. In this review, we summarize the principles of organization underlying chiral nanomaterials and generalize the recent advances in the main strategies used to fabricate these nanoparticles for bioscience applications. The creation of chirality from nanoscale building blocks has been investigated both experimentally and theoretically, and the tunability of chirality using external fields, such as light and magnetic fields, has allowed the optical activity of these materials to be controlled and their properties understood. Therefore, the specific recognition and potential applications of chiral materials in bioscience are discussed. The effects of the chirality of nanostructures on biological systems have been exploited to sense and cut molecules, for therapeutic applications, and so on. In the final part of this review, we examine the future perspectives for chiral nanomaterials in bioscience and the challenges posed by them.