Boron-Catalyzed Aromatic C-H Bond Silylation with Hydrosilanes

From Quaternary Carbon to Tertiary C(sp3)-Si and C(sp3)-Ge Bonds: Decyanative Coupling of Malononitriles with Chlorosilanes and Chlorogermanes Enabled by Ni/Ti Dual Catalysis

Transition-metal-catalyzed C-Si/Ge cross-coupling offers promising avenues for the synthesis of organosilanes/organogermanes, yet it is fraught with long-standing challenges. A Ni/Ti-catalyzed strategy is reported here, allowing the use of disubstituted malononitriles as tertiary C(sp3) coupling partners to couple with chlorosilanes and chlorogermanes, respectively. This method enables the catalytic cleavage of the C(sp3)-CN bond of the quaternary carbon followed by the formation of C(sp3)-Si/C(sp3)-Ge bonds from ubiquitously available starting materials. The efficiency and generality are showcased by a broad scope for both of the coupling partners, therefore holding the potential to synthesize structurally diverse quaternary organosilanes and organogermanes that were difficult to access previously.

Understanding the Regiodivergence between Hydroarylation and Trifluoromethylarylation of 1,3-Dienes Using Anilines in HFIP

Conjugated dienes (1,3-dienes) are versatile and valuable chemical feedstocks that can be used as two-carbon or four-carbon synthons with vast applications across the chemical industry. However, the main challenge for their productive incorporation in synthetic routes is their chemo-, regio-, and stereoselective functionalization. Herein, we introduce a unified strategy for the 1,2-hydroarylation and 1,4-trifluoromethylarylation of 1,3-dienes using anilines in hexafluoroisopropanol. DFT calculations point toward a kinetically controlled process in both transformations, particularly in the trifluoromethylarylation, to explain the regiodivergent outcome. In addition, we perform an extensive program of functionalization and diversification of the products obtained, including hydrogenation, oxidation, cyclizations, or cross-coupling reactions, that allows access to a library of high-value species in a straightforward manner.

Recent Strategies in the Nucleophilic Dearomatization of Pyridines, Quinolines, and Isoquinolines

Dearomatization reactions have become fundamental chemical transformations in organic synthesis since they allow for the generation of three-dimensional complexity from two-dimensional precursors, bridging arene feedstocks with alicyclic structures. When those processes are applied to pyridines, quinolines, and isoquinolines, partially or fully saturated nitrogen heterocycles are formed, which are among the most significant structural components of pharmaceuticals and natural products. The inherent challenge of those transformations lies in the low reactivity of heteroaromatic substrates, which makes the dearomatization process thermodynamically unfavorable. Usually, connecting the dearomatization event to the irreversible formation of a strong C-C, C-H, or C-heteroatom bond compensates the energy required to disrupt the aromaticity. This aromaticity breakup normally results in a 1,2- or 1,4-functionalization of the heterocycle. Moreover, the combination of these dearomatization processes with subsequent transformations in tandem or stepwise protocols allows for multiple heterocycle functionalizations, giving access to complex molecular skeletons. The aim of this review, which covers the period from 2016 to 2022, is to update the state of the art of nucleophilic dearomatizations of pyridines, quinolines, and isoquinolines, showing the extraordinary ability of the dearomative methodology in organic synthesis and indicating their limitations and future trends.

Heterodifunctionalization of Electron-Rich Alkynes Catalyzed by in Situ Generated Silylium Ions

Silylium ions are versatile Lewis acids in organic synthesis. While they have been well-known for the activation of σ donors, catalysis initiated by the activation of π donors remains underdeveloped, particularly for alkynes. Herein, we demonstrate an example of silylium-catalyzed alkyne heterodifunctionalization. The silylium ion generated in situ from HNTf2 and the silyl reagent serve as superior catalysts in the efficient silylphosphination and silylcyanation of electron-rich alkynes with excellent regio- and stereoselectivity. The compatibility of this protocol with strongly coordinating ligands (Ph2P and CN) not only complements the metal-catalyzed systems but also expands the scope of silylium-catalyzed reactions.

Trifluoromethylarylation of alkenes using anilines

Nitrogen containing compounds, such as anilines, are some of the most widespread and useful chemical species, although their high and unselective reactivity has prevented their incorporation into many interesting transformations, such as the functionalization of alkenes. Herein we report a method that allows the trifluoromethylarylation of alkenes using anilines, for the first time, with no need for additives, transition metals, photocatalysts or an excess of reagents. An in-depth mechanistic study reveals the key role of hexafluoroisopropanol (HFIP) as a unique solvent, establishing a hydrogen bonding network with aniline and trifluoromethyl reagent, that is responsible for the altered reactivity and exquisite selectivity. This work uncovers a new mode of reactivity that involves the use of abundant anilines as a non-prefunctionalized aromatic source and the simultaneous activation of trifluoromethyl hypervalent iodine reagent.

Controllable Si-C Bond Formation from Trihydrosilanes En Route to Synthesis of 1,4-Azasilinanes with Diverse Silyl Functionalities

A B(C6F5)3-catalyzed controllable inter/intra-/intermolecular Si-C bond formation process has been developed from trihydrosilane and dienamide with alkenes, anilines, or aryl iodides. A variety of 1,4-azasilinanes have been generated with diverse exo-cyclic heteroleptic disubstitutions on silicon, thereby expanding the range of silaazacyclic rings available for the discovery of silicon-containing drugs.

Stepwise on-demand functionalization of multihydrosilanes enabled by a hydrogen-atom-transfer photocatalyst based on eosin Y

Organosilanes are of vital importance for modern human society, having found widespread applications in functional materials, organic synthesis, drug discovery and life sciences. However, their preparation remains far from trivial, and on-demand synthesis of heteroleptic substituted silicon reagents is a formidable challenge. The generation of silyl radicals from hydrosilanes via direct hydrogen-atom-transfer (HAT) photocatalysis represents the most atom-, step-, redox- and catalyst-economic pathway for the activation of hydrosilanes. Here, in view of the green characteristics of neutral eosin Y (such as its abundance, low cost, metal-free nature, absorption of visible light and excellent selectivity), we show that using it as a direct HAT photocatalyst enables the stepwise custom functionalization of multihydrosilanes, giving access to fully substituted silicon compounds. By exploiting this strategy, we realize preferable hydrogen abstraction of Si-H bonds in the presence of active C-H bonds, diverse functionalization of hydrosilanes (for example, alkylation, vinylation, allylation, arylation, deuteration, oxidation and halogenation), and remarkably selective monofunctionalization of di- and trihydrosilanes.

Activation of Si-H and B-H bonds by Lewis acidic transition metals and p-block elements: same, but different

In this Perspective we discuss the ability of transition metal complexes to activate and cleave the Si-H and B-H bonds of hydrosilanes and hydroboranes (tri- and tetra-coordinated) in an electrophilic manner, avoiding the need for the metal centre to undergo two-electron processes (oxidative addition/reductive elimination). A formal polarization of E-H bonds (E = Si, B) upon their coordination to the metal centre to form σ-EH complexes (with coordination modes η1 or η2) favors this type of bond activation that can lead to reactivities involving the formation of transient silylium and borenium/boronium cations similar to those proposed in silylation and borylation processes catalysed by boron and aluminium Lewis acids. We compare the reactivity of transition metal complexes and boron/aluminium Lewis acids through a series of catalytic reactions in which pieces of evidence suggest mechanisms involving electrophilic reaction pathways.

Catalysis with Diboron(4)/Pyridine: Application to the Broad-Scope [3 + 2] Cycloaddition of Cyclopropanes and Alkenes

In contrast to the extensive but non-recyclable use of tetraalkoxydiboron(4) compounds as stoichiometric reagents in diverse reactions, this article reports an atom-economical reaction using a commercial diboron(4) as the catalyst. The key to success was designing a catalytic cycle for radical [3 + 2] cycloaddition involving a pyridine cocatalyst to generate from the diboron(4) catalyst and reversibly mediate the transfer of boronyl radicals. In comparison with known [3 + 2] cycloaddition with transition metal-based catalysts, the current reaction features not only metal-free conditions, inexpensive and stable catalysts, and simple operation but also remarkably broadened substrate scope. In particular, previously unusable cyclopropyl ketones without an activating group and/or alkenes with 1,2-disubstitution and 1,1,2-trisubstitution patterns were successfully used for the first time. Consequently, challenging cyclopentane compounds with various levels of substitution (65 examples, 57 new products, up to six substituents at all five ring atoms) were readily prepared in generally high to excellent yield and diastereoselectivity. The reaction was also successfully applied in concise formal synthesis of an anti-obesity drug and building natural product-like complex bridged or spirocyclic compounds. Mechanistic experiments and computational investigation support the proposed radical relay catalysis featuring a pyridine-assisted boronyl radical catalyst. Overall, this work demonstrates the first approach to use tetraalkoxydiboron(4) compounds as catalysts and may lead to the development of new, green, and efficient transition metal-like boron-catalyzed organic reactions.

DFT Mechanistic Study of the Cyclopropanation of Styrene and Aryldiazodiacetate Catalyzed by Tris(pentafluorophenyl)borane

Metal-free boron Lewis acids, tris(pentafluorophenyl)borane B(C₆F₅)₃, have the advantages of low toxicity and low cost and are a promising catalyst. A density functional theory (DFT) calculation was used to clarify the mechanism and the origin of the diastereoselective cyclopropanation of aryldiazodiacetate and styrene derivatives catalyzed by B(C₆F₅)₃. Four pathways were calculated: B(C₆F₅)₃-catalyzed N-, C-, and O-bound boron-activated aryldiazodiacetate and without B(C₆F₅)₃ catalysis. By calculating and comparing the energy barriers, the most possible reaction mechanism was proposed, that is, first, B(C₆F₅)₃ catalyzed O-bound boron to activate aryldiazodiacetate, followed by the removal of a N₂ molecule, and finally, styrene nucleophilic attack occurred to produce [2+1] cyclopropane products. N₂ removal is the rate-limiting step, and this step determines the preference of a given mechanism. The calculated results are in agreement with experimental observations. The origin of diastereoselectivity is further explained on the basis of the favorable mechanism. The steric hindrance interference between the styrene aryl group and the large tri(pentafluorophenyl)borane B(C₆F₅)₃ and the favorable π-π stacking interaction between the benzene rings combined to cause the high diastereoselectivity, which resulted in lower energy of the transition state (TS) corresponding to the reaction mechanism. The calculated results not only provide a more detailed explanation of the mechanism for the experimental study but also have certain reference and guiding significance for other catalytic cyclopropanation reactions.

Boron Lewis Acid Catalyzed Intermolecular trans-Hydroarylation of Ynamides with Hydroxyarenes

An atom-economic protocol for the efficient and highly chemo- and stereoselective trans-hydroarylation of ynamides with hydroxyarenes catalyzed by B(C₆F₅)₃ has been developed. Use of readily available starting materials, low catalyst loading, mild reaction conditions, a broad substrate scope, ease of scale-up, and versatile functionalizations of the enamide products make this approach very practical and attractive.

Rhodium hydride enabled enantioselective intermolecular C–H silylation to access acyclic stereogenic Si–H

The tremendous success of stereogenic carbon compounds has never ceased to inspire researchers to explore the potentials of stereogenic silicon compounds. Intermolecular C–H silylation thus represents the most versatile and straightforward strategy to construct C–Si bonds, however, its enantioselective variant has been scarcely reported to date. Herein we report a protocol that allows for the enantioselective intermolecular C–H bond silylation, leading to the construction of a wide array of acyclic stereogenic Si–H compounds under simple and mild reaction conditions. Key to the success is (1) a substrate design that prevents the self-reaction of prochiral silane and (2) the employment of a more reactive rhodium hydride ([Rh]-H) catalyst as opposed to the commonly used rhodium chloride ([Rh]-Cl) catalyst. This work unveils opportunities in converting simple arenes into value-added stereogenic silicon compounds.

Construction of chiral organosilicon compounds could have implications in photophysical, biological, and chemical fields, as silicon is isoelectronic with carbon, and can mimic carbon atoms while providing slightly different properties. Here the authors present an intermolecular, enantioselective C–H silylation of heterocycles via rhodium catalysis.

AgNTf2-Catalyzed Regioselective C-H Alkenylation of N,N-Dialkylanilines with Ynamides

Regioselective C-H alkenylation of N,N-dialkylanilines with ynamides was developed using AgNTf₂ as a catalyst. This approach represents a facile hydroarylation of ynamides, allowing for the introduction of an alkenyl group exclusively at the para position of aniline derivatives. As a result, a series of 4-alkenyl N,N-dialkylanilines were synthesized with excellent regioselectivities.

Highly Regio- and Enantioselective Hydrosilylation of gem-Difluoroalkenes via Nickel Catalysis

The synthesis of small organic molecules with a difluoromethylated stereocenter is particularly attractive in drug discovery. Herein, we developed an efficient method for the direct generation of difluoromethylated stereocenters through Ni(0)-catalyzed regio - and enantioselective hydrosilylation of gem -difluoroalkenes. The reaction also represents the enantioselective construction of carbon(sp 3 )-silicon bonds with nickel catalysis, which provides an atom- and step-economical synthesis route of high-value optically active α-difluoromethylsilanes. This protocol features with readily available starting materials and commercial chiral catalysis, broad substrates spanning a range of functional groups with high yield (up to 99% yield) and excellent enantioselectivity (up to 96% ee). The enantioenriched products undergo a variety of stereospecific transformations. Preliminary mechanistic studies were performed.

Regioselective Silylations of Propargyl and Allyl Pivalates through Ca-Promoted Reductive C(sp3)-O Bond Cleavage

A practical protocol for the regioselective preparation of 3-phenylpropargylsilanes and 3-phenylallylsilanes in yields of 36-77 and 48-86%, respectively, from readily accessible 3-phenylpropargyl and 1-phenylallyl pivalates was developed through reductive C(sp³)-O bond cleavage. This method represents the first example of the direct application of vastly abundant calcium granules to a reductive coupling reaction. A broad range of propargylsilanes and allylsilanes are simply prepared using easy-to-handle pivalates and chlorotrimethylsilane under mild catalyst-free and additive-free conditions.

Borane-catalyzed selective dihydrosilylation of terminal alkynes: reaction development and mechanistic insight

Here, we describe simple B(C₆F₅)₃-catalyzed mono- and dihydrosilylation reactions of terminal alkynes by using a silane-tuned chemoselectivity strategy, affording vinylsilanes and unsymmetrical geminal bis(silanes). This strategy is applicable to the dihydrosilylation of both aliphatic and aryl terminal alkynes with different silane combinations. Gram-scale synthesis and conducting the reaction without the exclusion of air and moisture demonstrate the practicality of this methodology. The synthetic utility of the resulting products was further highlighted by the structural diversification of geminal bis(silanes) through transforming the secondary silane into other silyl groups. Comprehensive theoretical calculations combined with kinetical isotope labeling studies have shown that a prominent kinetic differentiation between the hydrosilylation of alkynes and vinylsilane is responsible for the chemoselective construction of unsymmetrical 1,1-bis(silanes).

A B(C₆F₅)₃/silane-based system enables the chemoselective dihydrosilylation of terminal alkynes. Using a combination of different types of hydrosilanes, a series of unsymmetrical or symmetrical 1,1-bis(silanes) could be constructed.

Ruthenium-Catalyzed Isomerization of ortho-Silylanilines to Their para Isomers

The catalytic ortho to para transposition of a silyl group in aniline derivatives is described. [RuCl₂(p-cymene)]₂/BINAP in conjunction with a Cu(OAc)₂ additive serves as a potent catalytic system. This method is also applicable to the isomerization of 2-silylpyrrole derivatives to the corresponding 3-silyl isomers.

Base-Mediated Borylsilylation/Silylation of Ammonium Salts with Silylborane

This work describes a base-mediated borylsilylation of benzylic ammonium salts to synthesize geminal silylboronates bearing benzylic proton under mild reaction conditions. Deaminative silylation of aryl ammonium salts was also achieved in the presence of LiO^tBu. This strategy which is featured with high efficiency, mild reaction conditions, and good functional group tolerance provides efficient routes for late-stage functionalization of amines.

Copper-Catalyzed Direct sp2 C-H Silylation of Arylamides Using Disilanes

A copper-catalyzed method for direct intermolecular ortho-silylation of benzamides has been developed that affords organosilane products in moderate to high yields. The key features include: (i) use of commercially available disilanes as a silicon source with 8-aminoquinoline as a bidentate directing group, (ii) use of earth-abundant first-row transition metal, (iii) operationally simple conditions without the need of an inert atmosphere, and (iv) tolerance of a wide range of functional groups. The practicality and effectiveness of this method have been demonstrated by a gram-scale experiment. This strategy, therefore, constitutes a convenient way of constructing C-Si bonds useful for synthetic organic chemistry.

An effective and versatile strategy for the synthesis of structurally diverse heteroarylsilanes via Ir(iii)-catalyzed C-H silylation

A versatile silylation of heteroaryl C–H bonds is accomplished under the catalysis of a well-defined spirocyclic NHC Ir(iii) complex (SNIr), generating a variety of heteroarylsilanes. A significant advantage of this catalytic system is that multiple types of intermolecular C–H silylation can be achieved using one catalytic system at α, β, γ, or δ positions of heteroatoms with excellent regioselectivities. Mechanistic experiments and DFT calculations indicate that the polycyclic ligand of SNIr can form an isolable cyclometalated intermediate, which leaves a phenyl dentate free and provides a hemi-open space for activating substrates. In general, favorable silylations occur at γ or δ positions of chelating heteroatoms, forming 5- or 6-membered C–Ir–N cyclic intermediates. If such an activation mode is prohibited sterically, silylations would take place at the α or β positions. The mechanistic studies would be helpful for further explaining the reactivity of the SNIr system.

A versatile silylation of heteroaryl C–H bonds is accomplished under the catalysis of a well-defined spirocyclic NHC Ir(iii) complex (SNIr), generating a variety of heteroarylsilanes.

Iron-Mediated Selective Sulfonylmethylation of Aniline Derivatives with p-Toluenesulfonylmethyl Isocyanide (TosMIC)

An iron-mediated highly selective C-H sulfonylmethylation of aniline derivatives with p-toluenesulfonylmethyl isocyanide in a mixture solvent of H₂O and PEG₄₀₀ under an Ar atmosphere has been realized. This transformation proceeds with operational convenience, use of earth-abundant metal catalyst and nontoxic media, broad substrate scope, and good functional group tolerance. The current methodology could be applied to the regioselective C-H sulfonylmethylation of indolines, tetrahydroquinolines, and tertiary anilines.

Silylium Ions: From Elusive Reactive Intermediates to Potent Catalysts

The history of silyl cations has all the makings of a drama but with a happy ending. Being considered reactive intermediates impossible to isolate in the condensed phase for decades, their actual characterization in solution and later in solid state did only fuel the discussion about their existence and initially created a lot of controversy. This perception has completely changed today, and silyl cations and their donor-stabilized congeners are now widely accepted compounds with promising use in synthetic chemistry. This review provides a comprehensive summary of the fundamental facts and principles of the chemistry of silyl cations, including reliable ways of their preparation as well as their physical and chemical properties. The striking features of silyl cations are their enormous electrophilicity and as such reactivity as super Lewis acids as well as fluorophilicity. Known applications rely on silyl cations as reactants, stoichiometric reagents, and promoters where the reaction success is based on their steady regeneration over the course of the reaction. Silyl cations can even be discrete catalysts, thereby opening the next chapter of their way into the toolbox of synthetic methodology.

Consecutive β,β'-Selective C(sp3 )-H Silylation of Tertiary Amines with Dihydrosilanes Catalyzed by B(C6 F5 )3

Tris(pentafluorophenyl)borane has been found to catalyze the two-fold C(sp3 )-H silylation of various trialkylamine derivatives with dihydrosilanes, furnishing the corresponding 4-silapiperidines in decent yields. The multi-step reaction cascade involves amine-to-enamine dehydrogenation at two alkyl residues and two electrophilic silylation reactions of those enamines, one inter- and one intramolecular.

A Combined Computational and Experimental Study of Rh-Catalyzed C-H Silylation with Silacyclobutanes: Insights Leading to a More Efficient Catalyst System

The study of new C-H silylation reagents and reactions remains an important topic. We reported that under Rh catalysis, silacyclobutanes (SCBs) for the first time were able to react with C(sp²)-H and C(sp³)-H bonds, however the underlying reasons for such a new reactivity were not understood. Through this combined computational and experimental study on C-H silylation with SCBs, we not only depict a reaction pathway that fully accounts for the reactivity and all the experimental findings but also streamline a more efficient catalyst that significantly improves the reaction rates and yields. Our key findings include: (1) the active catalytic species is a [Rh]-H as opposed to the previously proposed [Rh]-Cl; (2) the [Rh]-H is generated via a reductive elimination/β-hydride (β-H) elimination sequence, as opposed to previously proposed endocyclic β-H elimination; (3) the regio- and enantio-determining steps are identified; (4) and of the same importance, the discretely synthesized [Rh]-H is shown to be a more efficient catalyst. This work suggests that the [Rh]-H/diphosphine system should find further applications in C-H silylations involving SCBs.

Electron-deficient boron-based catalysts for C-H bond functionalisation

In contrast to transition metal-catalysed C-H functionalisation, highly efficient construction of C-C and C-X (X = N, O, S, B, Si, etc.) bonds through metal-free catalytic C-H functionalisation remains one of the most challenging tasks for synthetic chemists. In recent years, electron-deficient boron-based catalyst systems have exhibited great potential for C-H bond transformations. Such emerging systems may greatly enrich the chemistry of C-H functionalisation and main-group element catalysis, and will also provide enormous opportunities in synthetic chemistry, materials chemistry, and chemical biology. This article aims to give a timely comprehensive overview to recognise the current status of electron-deficient boron-based catalysis in C-H functionalisation and stimulate the development of more efficient catalytic systems.

Palladium-catalyzed remote para-C-H activation of arenes assisted by a recyclable pyridine-based template

Direct para-selective C-H functionalization of arenes remains a daunting challenge and is still significantly restricted to a few scaffolds. Herein, we report an unprecedented pyridine-based para-directing template (DT) assisted, Pd-catalyzed para-C-H alkenylation of three classes of arenes, i.e. phenylpropanoic acids, 2-phenyl benzoic acids and benzyl alcohols, with a series of alkenes including perfluoroalkenes. Notably, the pyridine-based para-DT could be easily synthesized and readily recycled under mild conditions. These results may find application in rapid construction of para-substituted arenes and stimulate the exploration of novel methods for para-C-H functionalization of arenes.

Iron-catalyzed para-selective C–H silylation of benzamide derivatives with chlorosilanes

This paper developed the para-selective silylation of benzamide derivatives with chlorosilanes using FeCl₂ catalysis.

When phosphoryl azide meets mechanochemistry: clean, rapid, and efficient synthesis of phosphoryl amides under B(C6F5)3 catalysis in a ball mill

We described herein the first example associated with B(C6F5)3-catalyzed preparation of phosphoryl amides under mechanochemical conditions.

Facile synthesis of tribenzosilepins from terphenyls and dihydrosilanes by electrophilic double silylation

Tribenzosilepins were synthesized from terphenyls and dihydrosilanes via a facile approach using a double sila-Friedel–Crafts reaction.

B(C6F5)3-Catalyzed cyclization of alkynes: direct synthesis of 3-silyl heterocyclic compounds

An efficient one-pot strategy for easy access to 3-silyl heterocyclic compounds was developed via a B(C₆F₅)₃-catalyzed cycloaddition reaction of o-(1-alkynyl)(thio)anisoles or o-(1-alkynyl)-N-methylaniline. In this reaction, benzenethiophene, benzofuran or indole skeletons could be constructed by an intermolecular cyclization with diphenylsilane. This protocol elicited moderate-to-good yields with metal-free reaction systems.

Synthesis of six-membered silacycles by borane-catalyzed double sila-Friedel-Crafts reaction

We have developed a catalytic synthetic method to prepare phenoxasilins. A borane-catalyzed double sila-Friedel–Crafts reaction between amino group-containing diaryl ethers and dihydrosilanes can be used to prepare a variety of phenoxasilin derivatives in good to excellent yields. The optimized reaction conditions were also applicable for diaryl thioethers to afford their corresponding six-membered silacyclic products. The gram-scale synthesis of a representative bis(dimethylamino)phenoxasilin and the transformation of its amino groups have also been demonstrated.

Dual reactivity of B(C6F5)3 enables the silylative cascade conversion of N-aryl piperidines to sila-N-heterocycles: DFT calculations

A theoretical study reveals that the dual reactivity of B(C₆F₅)₃ enables the unique silylative cascade conversion of N-aryl piperidines to bridged sila-N-heterocycles.

B(C6F5)3-Catalyzed C-C Coupling of 1,4-Naphthoquinones with the C-3 Position of Indole Derivatives in Water

An atom-economical and environmentally benign approach for the synthesis of indole-substituted 1,4-naphthoquinones from indoles and 1,4-naphthoquinones using readily available Lewis acidic B(C₆F₅)₃ in water and with the recycling of water and part of the catalyst is reported. The reaction proceeded through the B(C₆F₅)₃-catalyzed C(sp²)-H and C(sp²)-H bond coupling of 1,4-naphthoquinones with the C-3 position of indole derivatives in water. This methodology provides a facile protocol for the synthesis of some new indole-substituted 1,4-naphthoquinones in satisfactory yields and with a broad substrate scope. When compared to known methods for the synthesis of indole-substituted 1,4-naphthoquinones, this protocol is practical and efficient and does not require a transition-metal catalyst or toxic organic solvents. In addition, we utilized a simple filtration process for complete recycling of the solvent and the part of the catalyst in each reaction cycle.