Benzoisothiazolone Organo/Copper-Cocatalyzed Redox Dehydrative Construction of Amides and Peptides from Carboxylic Acids using (EtO)3P as the Reductant and O2 in Air as the Terminal Oxidant

Direct formation of amide/peptide bonds from carboxylic acids: no traditional coupling reagents, 1-pot, and green

Technology for generating especially important amide and peptide bonds from carboxylic acids and amines that avoids traditional coupling reagents is described. The 1-pot processes developed rely on thioester formation, neat, using a simple dithiocarbamate, and are safe and green, and rely on Nature-inspired thioesters that are then converted to the targeted functionality.

A variable-stiffness and healable pneumatic actuator

Pneumatic-powered actuators are receiving increasing attention due to their widespread applications. However, their inherent low stiffness makes them incompetent in tasks requiring high load capacity or high force output. On the other hand, soft pneumatic actuators are susceptible to damage caused by over-pressuring or punctures by sharp objects. In this work, we designed and synthesized a coordination adaptable network (PETMP-AIM-Cu) with high mechanical rigidity (Young's modulus of 1.9 GPa and elongation <2% before fracturing) as well as excellent variable stiffness property (soft-rigid switching ability σ as high as 3 268 000 when ΔT = 90 °C). Combining PETMP-AIM-Cu with a self-healing elastomer based on dynamic disulfide bonds (LP-PDMS), we fabricated a new pneumatic actuator which shows high load capacity at room temperature, but can also easily deform upon heating and thus can be actuated pneumatically. Benefiting from the excellent self-healing ability of PETMP-AIM-Cu and LP-PDMS, the entire pneumatic actuator can still be actuated after being cut and healed. Such a variable-stiffness and healable pneumatic actuator would be useful for complex environmental applications.

A diselenobis-functionalized magnetic catalyst based on iron oxide/silica nanoparticles suggested for amidation reactions

In this study, a new heterogeneous magnetic catalytic system based on selenium-functionalized iron oxide nanoparticles is presented and suggested for facilitating amide/peptide bonds formation. The prepared nanocatalyst, entitled as "Fe3O4/SiO2-DSBA" (DSBA stands for 2,2'-diselanediylbis benzamide), has been precisely characterized for identifying its physicochemical properties. As the most brilliant point, the catalytic performance of the designed system can be mentioned, where only a small amount of Fe3O4/SiO2-DSBA (0.25 mol%) has resulted in 89% reaction yield, under a mild condition. Also, given high importance of green chemistry, convenient catalyst particles separation from the reaction medium through its paramagnetic property (ca. 30 emu·g-1) should be noticed. This particular property provided a substantial opportunity to recover the catalyst particles and successfully reuse them for at least three successive times. Moreover, due to showing other excellences, such as economic benefits and nontoxicity, the presented catalytic system is recommended to be scaled up and exploited in the industrial applications.

Convenient synthesis of dipeptide structures in solution phase assisted by a thioaza functionalized magnetic nanocatalyst

In this study, a heterogeneous nanocatalyst is presented that is capable to efficiently catalyze the synthetic reactions of amide bond formation between the amino acids. This nanocatalyst which is named Fe3O4@SiO2/TABHA (TABHA stands for thio-aza-bicyclo-hepten amine), was composed of several layers that increased the surface area to be functionalized with 2-aminothiazole rings via Diels-Alder approach. Firstly, various analytic methods such as Fourier-transform infrared (FTIR) and energy-dispersive X-ray (EDX) spectroscopic methods, thermogravimetric analysis (TGA), electron microscopy (EM), and UV-vis diffuse reflectance spectroscopy (UV-DRS) have been used to characterize the desired structure of the Fe3O4@SiO2/TABHA catalyst. Afterward, the application of the presented catalytic system has been studied in the peptide bond formation reactions. Due to the existence of a magnetic core in the structure of the nanocatalyst, the nanoparticles (NPs) could be easily separated from the reaction medium by an external magnet. This special feature has been corroborated by the obtained results from vibrating-sample magnetometer (VSM) analysis that showed 24 emu g-1 magnetic saturation for the catalytic system. Amazingly, a small amount of Fe3O4@SiO2/TABHA particles (0.2 g) has resulted in ca. 90% efficiency in catalyzing the peptide bond formation at ambient temperature, over 4 h. Also, this nanocatalyst has demonstrated an acceptable recycling ability, where ca. 76% catalytic performance has been observed after four recycles. Due to high convenience in the preparation, application, and recyclization processes, and also because of lower cost than the traditional coupling reagents (like TBTU), the presented catalytic system is recommended for the industrial utilization.

Generation of Oxyphosphonium Ions by Photoredox/Cobaloxime Catalysis for Scalable Amide and Peptide Synthesis in Batch and Continuous-Flow

Phosphine-mediated deoxygenative nucleophilic substitutions, such as the Mitsunobu reaction, are of great importance in organic synthesis. However, the conventional protocols require stoichiometric oxidants to trigger the formation of the oxyphosphonium intermediates for the subsequent nucleophilic additions. Through dual catalysis of photoredox and cobaloxime, we realized a radical strategy for the catalytic formation of acyloxyphosphonium ions that enables direct amidation. The deoxygenative protocol exhibits a broad scope and has been used in the late-stage amidation of drug molecules. In addition to batch reactions, a continuous-flow reactor was developed, enabling rapid peptide synthesis on gram scale. The successful assembly of a tetrapeptide on the solid support further demonstrated the versatility of this photocatalytic system. Moreover, experimental and computational studies are consistent with the hypothesis of acyloxyphosphonium ions being formed as the key intermediates.

Transition-metal mediated carbon-sulfur bond activation and transformations: an update

Carbon-sulfur bond cross-coupling has become more and more attractive as an alternative protocol to establish carbon-carbon and carbon-heteroatom bonds. Diverse transformations through transition-metal-catalyzed C-S bond activation and cleavage have recently been developed. This review summarizes the advances in transition-metal-catalyzed cross-coupling via carbon-sulfur bond activation and cleavage since late 2012 as an update of the critical review on the same topic published in early 2013 (Chem. Soc. Rev., 2013, 42, 599-621), which is presented by the categories of organosulfur compounds, that is, thioesters, thioethers including heteroaryl, aryl, vinyl, alkyl, and alkynyl sulfides, ketene dithioacetals, sulfoxides including DMSO, sulfones, sulfonyl chlorides, sulfinates, thiocyanates, sulfonium salts, sulfonyl hydrazides, sulfonates, thiophene-based compounds, and C[double bond, length as m-dash]S functionality-bearing compounds such as thioureas, thioamides, and carbon disulfide, as well as the mechanistic insights. An overview of C-S bond cleavage reactions with stoichiometric transition-metal reagents is briefly given. Theoretical studies on the reactivity of carbon-sulfur bonds by DFT calculations are also discussed.

Rational Design of an Organocatalyst for Peptide Bond Formation

Amide bonds are ubiquitous in peptides, proteins, pharmaceuticals, and polymers. The formation of amide bonds is a straightforward process: amide bonds can be synthesized with relative ease because of the availability of efficient coupling agents. However, there is a substantive need for methods that do not require excess reagents. A catalyst that condenses amino acids could have an important impact by reducing the significant waste generated during peptide synthesis. We describe the rational design of a biomimetic catalyst that can efficiently couple amino acids featuring standard protecting groups. The catalyst design combines lessons learned from enzymes, peptide biosynthesis, and organocatalysts. Under optimized conditions, 5 mol % catalyst efficiently couples Fmoc amino acids without notable racemization. Importantly, we demonstrate that the catalyst is functional for the synthesis of oligopeptides on solid phase. This result is significant because it illustrates the potential of the catalyst to function on a substrate with a multitude of amide bonds, which may be expected to inhibit a hydrogen-bonding catalyst.

Facile Peptide Bond Formation: Effective Interplay between Isothiazolone Rings and Silanol Groups at Silver/Iron Oxide Nanocomposite Surfaces

Proportional to considerable progress in protein-drug conjugations, attention to the efficient peptide coupling reagents is being increased. Hence, in this study, a versatile heterogeneous nanoscale reagent is presented for chemical, biological, and medical purposes. A combination of silver and silica-coated iron oxide nanoparticles (Ag/Fe₃O₄) has been well functionalized with isothiazolone rings via a silver-modified Heck mechanism. An appropriate condition is provided for peptide bond formation through the surface interplay between silanol groups and the loaded isothiazolone rings. A logical mechanism including a series of successive covalent bonds onto the surface of Ag/Fe₃O₄ nanocomposites is suggested for this catalyzed peptide bond formation. Accurate comparisons have been made to obtain the optimum value of the nanocatalyst and suitable conditions. As an additional application, the biological activity of the desired product has also been investigated through antibacterial assay tests. The results showed that our desired product could also be used as an effective heterogeneous nanoscale antibacterial agent for different purposes. In this regard, all of the essential structural and practical analyses have been carried out and precisely interpreted.

Esterification by Redox Dehydration Using Diselenides as Catalytic Organooxidants

Ortho-functionalized aryl diselenides are catalytic (5.0 mol %) oxidants for the construction of esters from carboxylic acids and alcohols in the presence of stoichiometric triethyl phosphite and dioxygen in air as the terminal redox reagents (redox dehydration conditions). The reaction proceeds through the intermediacy of the anhydride and requires the presence of 10% DMAP to drive the esterification.

Aerobic, Diselenide-Catalyzed Redox Dehydration: Amides and Peptides

At 2.5 mol % loadings using reaction temperatures between 30-55 °C, ortho-functionalized diaryl diselenides are highly effective organocatalytic oxidants for aerobic redox dehydrative amidic and peptidic bond formation using triethyl phosphite as a simple terminal reductant. This simple-to-perform organocatalytic reaction relies on the ability of selenols to react directly with dioxygen in air without recourse to metal catalysts. It represents an important step toward the development of a general, economical, and benign catalytic redox dehydration protocol.