Series of Multifluorine Substituted Oligomers for Organic Solar Cells with Efficiency over 9% and Fill Factor of 0.77 by Combination Thermal and Solvent Vapor Annealing

Organic Solar Cells Based on Non-Fullerene Low Molecular Weight Organic Semiconductor Molecules

The development of narrow bandgap A-D-A- and ADA'DA-type non-fullerene small molecule acceptors (NFSMAs) along with small molecule donors (SMDs) have led to significant progress in all-small molecule organic solar cells. Remarkable power conversion efficiencies, nearing the range of 17-18 %, have been realized. These efficiency values are on par with those achieved in OSCs based on polymeric donors. The commercial application of organic photovoltaic technology requires the design of more efficient organic conjugated small molecule donors and acceptors. In recent years the precise tuning of optoelectronic properties in small molecule donors and acceptors has attracted considerable attention and has contributed greatly to the advancement of all-SM-OSCs. Several reviews have been published in this field, but the focus of this review concerns the advances in research on OSCs using SMDs and NFSMAs from 2018 to the present. The review covers the progress made in binary and ternary OSCs, the effects of solid additives on the performance of all-SM-OSCs, and the recently developed layer-by-layer deposition method for these OSCs. Finally, we present our perspectives and a concise outlook on further advances in all-SM-OSCs for their commercial application.

High-Quality Hybrid Perovskite Thin Films by Post-Treatment Technologies in Photovoltaic Applications

Incredible progress in photovoltaic devices based on hybrid perovskite materials has been made in the past few decades, and a record-certified power conversion efficiency (PCE) of over 26% has been achieved in single-junction perovskite solar cells (PSCs). In the fabrication of high-efficiency PSCs, the postprocessing procedures toward perovskites are essential for designing high-quality perovskite thin films; developing efficient and reliable post-treatment techniques is very important to promote the progress of PSCs. Here, recent post-treatment technological reforms toward perovskite thin films are summarized, and the principal functions of the post-treatment strategies on the design of high-quality perovskite films have been thoroughly analyzed by dividing into two categories in this review: thermal annealing (TA)-related technique and TA-free technique. The latest research progress of the above two types of post-treatment techniques is summarized and discussed, focusing on the optimization of postprocessing conditions, the regulation of perovskite qualities, and the enhancement of device performance. Finally, an outlook of the prospect trends and future challenges for the fabrication of the perovskite layer and the production of highly efficient PSCs is given.

Optimized Crystal Framework by Asymmetric Core Isomerization in Selenium-Substituted Acceptor for Efficient Binary Organic Solar Cells

Both the regional isomerization and selenium-substitution of the small molecular acceptors (SMAs) play significant roles in developing efficient organic solar cells (OSCs), while their synergistic effects remain elusive. Herein, we developed three isomeric SMAs (S-CSeF, A-ISeF, and A-OSeF) via subtly manipulating the mono-selenium substituted position (central, inner, or outer) and type of heteroaromatic ring on the central core by synergistic strategies for efficient OSCs, respectively. Crystallography of asymmetric A-OSeF presents a closer intermolecular π-π stacking and more ordered 3-dimensional network packing and efficient charge-hopping pathways. With the successive out-shift of the mono-selenium substituted position, the neat films give a slightly wider band gap and gradually higher crystallinity and electron mobility. The PM1 : A-OSeF afford favourable fibrous phase separation morphology with more ordered molecular packing and efficient charge transportation compared to the other two counterparts. Consequently, the A-OSeF-based devices achieve a champion efficiency of 18.5 %, which represents the record value for the reported selenium-containing SMAs in binary OSCs. Our developed precise molecular engineering of the position and type of selenium-based heteroaromatic ring of SMAs provides a promising synergistic approach to optimizing crystal stacking and boosting top-ranked selenium-containing SMAs-based OSCs.

Propeller vs Quasi-Planar 6-Cantilever Small Molecular Platforms with Extremely Two-Dimensional Conjugated Extension

Two exotic 6-cantilever small molecular platforms, characteristic of quite different molecular configurations of propeller and quasi-plane, are established by extremely two-dimensional conjugated extension. When applied in small molecular acceptors, the only two cases of CH25 and CH26 that could contain six terminals and such broad conjugated backbones have been afforded thus far, rendering featured absorptions, small reorganization and exciton binding energies. Moreover, their distinctive but completely different molecular geometries result in sharply contrasting nanoscale film morphologies. Finally, CH26 contributes to the best device efficiency of 15.41 % among acceptors with six terminals, demonstrating two pioneered yet highly promising 6-cantilever molecular innovation platforms.

Dimerized Small-Molecular Acceptor Enables the Organic Bulk-Heterojunction Layer with High Thermal Stability

Incorporation of a non-fullerene acceptor (NFA) into an organic bulk-heterojunction currently has realized the extendable spectral response and high photocurrent generation in organic photodiodes. However, to allow these organic materials to be industrially commercialized, the thermal stability which enables the materials to survive under the process integration and operation needs to be considered. Generally, NFA small molecules showed high crystallinity, which aggregated through heating and led to the poor thermal stability. To tackle the thermal stability issue of highly efficient NFAs, two IDIC-based NFA dimers─IDIC-T Dimer and IDIC-TT Dimer─were designed, synthesized, and characterized; the thermal stability of the BHJ layer incorporating these dimer molecules was evaluated and compared with that of the BHJ layer using the monomer, IDIC-4Cl, as acceptors. Eventually, a power conversion efficiency of 9.44% was achieved for organic photovoltaic devices based on the NFA dimer. The dimers also showed remarkable thermal stability than the IDIC-4Cl monomer, which provided a promising direction for the polymer/small-molecule system in organic photodiodes for industrial practicability.

Highly Efficient Mixed Conduction in a Fused Oligomer n-Type Organic Semiconductor Enabled by 3D Transport Pathways

Tailoring organic semiconductors to facilitate mixed conduction of ionic and electronic charges when interfaced with an aqueous media has spurred many recent advances in organic bioelectronics. The field is still restricted, however, by very few n-type (electron-transporting) organic semiconductors with adequate performance metrics. Here, a new electron-deficient, fused polycyclic aromatic system, TNR, is reported with excellent n-type mixed conduction properties including a µC* figure-of-merit value exceeding 30 F cm^-1 V^-1 s^-1 for the best performing derivative. Comprising three naphthalene bis-isatin moieties, this new molecular design builds on successful small-molecule mixed conductors; by extending the molecular scaffold into the oligomer domain, good film-forming properties, strong π-π interactions, and consequently excellent charge-transport properties are obtained. Through judicious optimization of the side chains, the linear oligoether and branched alkyl chain derivative bgTNR is obtained which shows superior mixed conduction in an organic electrochemical transistor configuration including an electron mobility around 0.3 cm² V^-1 s^-1 . By optimizing the side chains, the dominant molecular packing can be changed from a preferential edge-on orientation (with high charge-transport anisotropy) to an oblique orientation that can support 3D transport pathways which in turn ensure highly efficient mixed conduction properties across the bulk semiconductor film.

Double Asymmetric Core Optimizes Crystal Packing to Enable Selenophene-based Acceptor with Over 18 % Efficiency in Binary Organic Solar Cells

Side-chain tailoring is a promising method to optimize the performance of organic solar cells (OSCs). However, asymmetric alkyl chain-based small molecular acceptors (SMAs) are still difficult to afford. Herein, we adopted a novel asymmetric n-nonyl/undecyl substitution strategy and synthesized two A-D₁ A'D₂ -A double asymmetric isomeric SMAs with asymmetric selenophene-based central core for OSCs. Crystallographic analysis indicates that AYT9Se11-Cl forms a more compact and order intermolecular packing compared to AYT11Se9-Cl, which contributed to higher electron mobility in neat AYT9Se11-Cl film. Moreover, the PM6 : AYT9Se11-Cl blend film shows a better morphology with appropriate phase separation and distinct face-on orientation than PM6 : AYT11Se9-Cl. The OSCs with PM6 : AYT9Se11-Cl obtain a superior PCE of 18.12 % compared to PM6 : AYT11Se9-Cl (17.52 %), which is the best efficiency for the selenium-incorporated SMAs in binary BHJ OSCs. Our findings elucidate that the promising double asymmetric strategy with isomeric alkyl chains precisely modulates the crystal packing and enhances the photovoltaic efficiency of selenophene-incorporated SMAs.

Carbazole and Diketopyrrolopyrrole-Based D-A π-Conjugated Oligomers Accessed via Direct C-H Arylation for Opto-Electronic Property and Performance Study

Five carbazole and diketopyrrolopyrrole-based donor-acceptor (D-A) new π-conjugated oligomers (π-COs) with gradually elongated lengths are facilely synthesized via a single pot of direct C-H arylation with merits of atom- and step-economy. The structure-property-performance correlations of these π-COs and their parent polymer are studied in detail by opto-electronic characterizations and bulk heterojunction (BHJ) organic photovoltaic (OPV) devices. It is found that the π-COs having longer lengths enable better performance in OPVs owing to the enhanced intermolecular interaction with the elongation of the conjugations. The above results not only highlight the powerful synthetic strategy here provided, but also reveal that π-COs with unique properties might find promising application in OPVs.

Tailoring microstructure and morphology via sequential fluorination to enhance the photovoltaic performance of low-cost polymer donors for organic solar cells

For utilizing the organic solar cells for commercial applications, reducing the overall cost of the photo absorbent materials is also very crucial, along with the realization of high power conversion efficiency (PCE) and excellent stability. Herein, we tried to address such challenge by synergistically controlling the amount of fluorine (F)-substituents (n = 2, 4) on easily scalable, low-cost wide-bandgap molecular design involving alternate fluorinated-thienyl benzodithiophene donor and 2,5-difluoro benzene (2FBn) or 2,3,5,6 tetrafluorobenzene (4FBn) to form two new polymer donors PBDT-2FBn and PBDT-4FBn, respectively. As expected, sequential fluorination causes lowering of the frontier energy levels and planarization of polymer backbone via F···S and C-H···F noncovalent molecular locks, which results in more pronounced molecular packing and enhanced crystallinity from PBDT-2FBn to PBDT-4FBn. By mixing with IT-4F acceptor, PBDT-2FBn:IT-4F-based blend demonstrated favorable molecular orientation with shorter π-π stacking distance, higher carrier mobilities with good trade-off ratio and desirable nanoscale morphology, hence delivered good PCE of 9.3% than PBDT-2FBn:IT-4F counterpart (8.6%). Furthermore, pairing PBDT-2FBn with BTP-BO-4Cl acceptor further improved absorption range and promoted privileged morphology with ideal domain sizes for efficient exciton dissociation and charge transport, resulting in further improvement of PCE to 10.2% with remarkably low energy loss of 0.46 eV, which is seldomly reported in NF-OSCs. Consequently, this study provides valuable guidelines for designing efficient and low-cost polymer donors for organic solar cell applications. This article is protected by copyright. All rights reserved.

Novel Oligomer Enables Green Solvent Processed 17.5% Ternary Organic Solar Cells: Synergistic Energy Loss Reduction and Morphology Fine-Tuning

The large non-radiative recombination is the main factor that limits state-of-the-art organic solar cells (OSCs). In this work, two novel structurally similar oligomers (named 5BDTBDD and 5BDDBDT) with D-A-D-A-D and A-D-A-D-A configuration are synthesized for high-performance ternary OSCs with low energy loss. As third components, these PM6 analogue oligomers effectively suppress the non-radiative recombination in OSCs. Although the highest occupied molecular orbital (HOMO) levels of 5BDTBDD and 5BDDBDT are higher than that of PM6, the oligomers enabled ultra-high electroluminescence quantum efficiency (EQE_EL ) of 0.05% and improved V_OC , indicating suppressing non-radiative recombination overweighs the common belief of deeper HOMO requirement in third component selection. Moreover, the different compatibility of 5BDTBDD and 5BDDBDT with PM6 and BTP-BO4Cl fine-tunes the active layer morphology with synergistic effects. The ternary devices based on PM6:5BDTBDD:BTPBO4Cl and PM6:5BDDBDT:BTP-BO4Cl achieve a significantly improved PCEs of 17.54% and 17.32%, representing the state-of-the art OSCs processed by green solvent of o-xylene. The strategy using novel oligomer as third component also has very wide composition tolerance in ternary OSCs. This is the first work that demonstrates novel structurally compatible D-A type oligomers are effective third components, and provides new understanding of synergetic energy loss mechanisms towards high performance OSCs.

Pot- and atom-economic synthesis of oligomeric non-fullerene acceptors via C–H direct arylation

Three long-chain oligomeric acceptors with a stepwise increase in conjugation length are obtained via three successive one-pot reactions and a systematic structure–property–performance relationship study was carried out.

Adjusting the photovoltaic performance of big fused ring-based small molecules by tailoring with different modifications

Three novel A-D-A type small-molecule donor materials, namely AAN-DPP2, AAN(T-DPP)2 and AANT(T-DPP)2, with anthanthrene (AAN) as the electron-donating core, diketopyrrolopyrrole (DPP) as the electron-accepting moiety, and thiophene as π-bridge units, have been designed and synthesized for application in bulk-heterojunction (BHJ) organic solar cells (OSCs). Compared to AAN-DPP2, devices based on AAN(T-DPP)2 and AANT(T-DPP)2 show better photovoltaic performance due to broader absorption and better planarity of the molecular backbone. A maximum power conversion efficiency (PCE) of 2.33% with a short-circuit current density (J sc) of 6.82 mA cm-2 and a fill factor (FF) of 39.80 was obtained in the AAN(T-DPP)2/PC71BM-based solar cells. This is resulting from the suitable thickness of the active layer, improving the ability of catching light and decreasing the twist angle of the backbone by inserting a thiophene spacer. The results indicate that strategic substitution of π-bridges and side-chains in A-D-A type SMs is an efficient strategy to improve photovoltaic performance.

Recent advances in non-fullerene organic photovoltaics enabled by green solvent processing

Solution-processed organic photovoltaic (OPV) as a new energy device has attracted much attention due to its huge potential in future commercial manufacturing. However, so far, most of the studies on high-performance OPV have been treated with halogenated solvents. Halogenated solvents not only pollute the environment, but are also harmful to human health, which will negatively affect the large-scale production of OPV in the future. Therefore, it is urgent to develop low-toxic or non-toxic non-halogen solvent-processable OPV. Compared with conventional fullerene OPVs, non-fullerene OPVs exist with stronger absorption, better-matched energy levels and lower energy loss. Processing photoactive layers with non-fullerenes as the acceptor material has broad potential advantages in non-halogenated solvents. This review introduces the research progress of non-fullerene OPV treated by three different kinds of green solvents as the non-halogenated and aromatic solvent, the non-halogenated and non-aromatic solvent, alcohol and water. Furthermore, the effects of different optimization strategies on the photoelectric performance and stability of non-fullerene OPV are analyzed in detail. The current optimization strategy can increase the power conversion efficiency of non-fullerene OPV processed with non-halogen solvents up to 17.33%, which is close to the performance of processing with halogen-containing solvents. Finally, the commercial potential of non-halogen solvent processing OPVs is discussed. The green solvent processing of non-fullerene-based OPVs will become a key development direction for the future of the OPV industry.

Developing Efficient Small Molecule Acceptors with sp2 -Hybridized Nitrogen at Different Positions by Density Functional Theory Calculations, Molecular Dynamics Simulations and Machine Learning

Chemical structure of small molecule acceptors determines their performance in organic solar cells. Multiscale simulations are necessary to avoid trial-and-error based design, ultimately to save time and resources. In current study, the effect of sp² -hybridized nitrogen substitution at the inner or the outmost position of central core, side chain, and terminal group of small molecule acceptors is investigated using multiscale computational modelling. Quantum chemical analysis is used to study the electronic behavior. Nitrogen substitution at end-capping has significantly decreased the electron-reorganization energy. No big change is observed in transfer integral and excited state behavior. However, nitrogen substitution at terminal group position is good way to improve electron-mobility. Power conversion efficiency (PCE) of newly designed acceptors is predicted using machine learning. Molecular dynamics simulations are also performed to explore the dynamics of acceptor and their blends with PBDB-T polymer donor. Florgy-Huggins parameter is calculated to study the mixing of designed small molecule acceptors with PBDB-T. Radial distribution function has indicated that PBDB-T has a closer packing with N3 and N4. From all analysis, it is found that nitrogen substitution at end-capping group is a better strategy to design efficient small molecule acceptors.

Modulating Crystal Packing, Film Morphology, and Photovoltaic Performance of Selenophene-Containing Acceptors through a Combination of Skeleton Isomeric and Regioisomeric Strategies

Here, we report a series of acceptor-donor-acceptor (A-D-A) architecture isomeric acceptors (SeCT-IC, CSeT-IC, and CTSe-IC), which have an identical electron-deficient terminal A-group and three different central D-cores with the selenophene at the innermost, relatively outer, and outermost positions of the central core, respectively. From CSeT-IC to the atom regioisomer of CTSe-IC and to the conjugated skeleton isomer of SeCT-IC, the optical band gap of neat films continuously reduced and highest occupied molecular orbitals (HOMO) gradually upshifted with changing the selenophene from relatively outer position to the outermost position and to the innermost position of the central core. More importantly, the single-crystal structure and the GIWAXS measurements revealed that CTSe-IC presents the closest π-π stacking distance, the largest CCL, and the best molecular order and crystallinity, which led to the highest electron mobility in neat films. Furthermore, the J71:CTSe-IC blend film presents a more ordered film morphology with more proper phase separation domain size, more dominant face-on orientation, and relatively higher and more balanced electron-hole mobilities in comparison with that of J71:SeCT-IC and J71:CSeT-IC. Consequently, the J71:CTSe-IC-based organic solar cell gave a superior power conversion efficiency (PCE) of 11.59%, which was obviously higher than those for J71:SeCT-IC (10.89%) and J71:CSeT-IC (8.52%). Our results demonstrate that the acceptor with selenophene in the outermost position led to significantly enhance the PCE. More importantly, rational modulation of the central fused core in combination with the conjugated skeleton isomeric method and the atom regioisomeric method provides an effective way to understand the structure-crystallinity-photovoltaic property relationship of selenophene-based regioisomers.

Two-Dimensional Conjugated Benzo[1,2-b:4,5-b']diselenophene-Based Copolymer Donor Enables Large Open-Circuit Voltage and High Efficiency in Selenophene-based Organic Solar Cells

A two-dimensional electron-rich fused-ring moiety (ClBDSe) based on benzo[1,2-b:4,5-b']diselenophene is synthesized. Three copolymers (PBDT-Se, PBDSe-T, and PBDSe-Se) are obtained by manipulating the connection types and number of selenophene units on the conjugated main chains with two 2D fused-ring units and two different π-bridges, respectively. In comparison with PBDT-Se and PBDSe-Se, PBDSe-T with benzo[1,2-b:4,5-b']diselenophene unit and thiophene π-bridge exhibits the deepest HOMO energy level and the strongest crystallinity in neat films. The PBDSe-T:Y6 blend film exhibits the best absorption complementarity, the most distinctive face-on orientation with proper phase separation, the highest carrier mobilities, and the lowest charge recombination among three blend films. Finally, the PBDSe-T:Y6-based device delivers an impressive power conversion efficiency (PCE) of 14.50 %, which is higher than those of PBDT-Se:Y6 and PBDSe-Se:Y6. Moreover, a decent open-circuit voltage (V_oc ) of 0.89 V with a remarkably small energy loss of 0.44 eV is achieved for PBDSe-T:Y6. The efficiency of 14.50 % is the highest value for selenophene-containing copolymer-based binary organic solar cells (OSCs). This study provides evidence that introduction of 2D-benzo[1,2-b:4,5-b']diselenophene as a fused electron-rich unit with π-bridging into copolymeric donors is a valid strategy for providing high V_oc and excellent PCE simultaneously in selenophene-based OSCs.

Effects of Side-Chain Engineering with the S Atom in Thieno[3,2-b]thiophene-porphyrin to Obtain Small-Molecule Donor Materials for Organic Solar Cells

To explore the effect of the introduction of heteroatoms on the properties of porphyrin materials, a new porphyrin-based derivative small-molecule donor named as PorTT-T was designed and synthesized based on alkyl-thieno[3,2-b]thiophene(TT)-substituted porphyrins. The linker bridge and end groups of PorTT-T were the same as those of XLP-II small-molecule donor materials, while the side-chain attached to the core of thieno[3,2-b]thiophene(TT)-substituted porphyrin was different. Measurements of intrinsic properties showed that PorTT-T has wide absorption and appropriate energy levels in the UV-visible range. A comparison of the morphologies of the two materials using atomic force microscopy showed that PorTT-T has a better surface morphology with a smaller root-mean-square roughness, and can present closer intermolecular stacking as compared to XLP-II. The device characterization results showed that PorTT-T with the introduced S atom has a higher open circuit voltage of 0.886 eV, a higher short circuit current of 12.03 mAcm⁻², a fill factor of 0.499, a high photovoltaic conversion efficiency of 5.32%, better external quantum efficiency in the UV-visible range, and higher hole mobility.

13.4 % Efficiency from All-Small-Molecule Organic Solar Cells Based on a Crystalline Donor with Chlorine and Trialkylsilyl Substitutions

How to simultaneously achieve both high open-circuit voltage (Voc ) and high short-circuit current density (Jsc ) is a big challenge for realising high power conversion efficiency (PCE) in all-small-molecule organic solar cells (all-SM OSCs). Herein, a novel small molecule (SM)-donor, namely FYSM-SiCl, with trialkylsilyl and chlorine substitutions was designed and synthesized. Compared to the original SM-donor FYSM-H, FYSM-Si with trialkylsilyl substitution showed a decreased crystallinity and lower highest occupied molecular orbital (HOMO) level, while FYSM-SiCl had an improved crystallinity, more ordered packing arrangement, significantly lower HOMO level, and predominant "face-on" orientation. Matched with a SM-acceptor Y6, the FYSM-SiCl-based all-SM OSCs exhibited both high Voc of 0.85 V and high Jsc of 23.7 mA cm-2 , which is rare for all-SM OSCs and could be attributed to the low HOMO level of FYSM-SiCl donor and the delicate balance between high crystallinity and suitable blend morphology. As a result, FYSM-SiCl achieved a high PCE of 13.4 % in all-SM OSCs, which was much higher than those of the FYSM-H- (10.9 %) and FYSM-Si-based devices (12.2 %). This work demonstrated a promising method for the design of efficient SM-donors by a side-chain engineering strategy via the introduction of trialkylsilyl and chlorine substitutions.

A Synergistic Strategy of Manipulating the Number of Selenophene Units and Dissymmetric Central Core of Small Molecular Acceptors Enables Polymer Solar Cells with 17.5 % Efficiency

A dissymmetric backbone and selenophene substitution on the central core was used for the synthesis of symmetric or dissymmetric A-DA'D-A type non-fullerene small molecular acceptors (NF-SMAs) with different numbers of selenophene. From S-YSS-Cl to A-WSSe-Cl and to S-WSeSe-Cl, a gradually red-shifted absorption and a gradually larger electron mobility and crystallinity in neat thin film was observed. A-WSSe-Cl and S-WSeSe-Cl exhibit stronger and tighter intermolecular π-π stacking interactions, extra S⋅⋅⋅N non-covalent intermolecular interactions from central benzothiadiazole, better ordered 3D interpenetrating charge-transfer networks in comparison with thiophene-based S-YSS-Cl. The dissymmetric A-WSSe-Cl-based device has a PCE of 17.51 %, which is the highest value for selenophene-based NF-SMAs in binary polymer solar cells. The combination of dissymmetric core and precise replacement of selenophene on the central core is effective to improve J_sc and FF without sacrificing V_oc .

Formation of Large Crystalline Domains in a Semiconducting Polymer with Semi-fluorinated Alkyl Side Chains and Application to High-Performance Thin-Film Transistors

The semi-fluorinated alkyl (SFA) side chain introduced thienylenevinylene (TV)-based p-type polymer, PC12TVC5F7T, was synthesized for use in organic thin-film transistors (OTFTs). Herein, we investigated the influence of SFA side chains on the morphology, molecular orientation, and crystalline structure using a combination of atomic force microscopy (AFM), scanning electron microscopy (SEM), two-dimensional (2D) grazing-incidence wide-angle X-ray scattering (GIWAXS), and density functional theory (DFT) calculations. Interestingly, the incorporation of SFA side chains led to the evolution of plate-like large-sized domains and also strongly intermolecular stacked high crystalline structures. Furthermore, due to the strong interactions between SFA side chains, several (00h) peaks could be observed for PC12TVC5F7T, in spite of their fairly large dihedral angle. As a result, due to the well-developed microstructure of PC12TVC5F7T, the OTFT devices based on it exhibited a high hole mobility of 1.91 cm² V^-1 s^-1, which is an outstanding value among the poly(thiophene) derivative polymers. These observations indicate that large-sized domains and strongly intermolecular stacked high crystalline structures, which are beneficial for charge carrier transport, could be attained by the introduction of SFA side chains, further enhancing the performance of the OTFTs.

The Bulk Heterojunction in Organic Photovoltaic, Photodetector, and Photocatalytic Applications

Organic semiconductors require an energetic offset in order to photogenerate free charge carriers efficiently, owing to their inability to effectively screen charges. This is vitally important in order to achieve high power conversion efficiencies in organic solar cells. Early heterojunction-based solar cells were limited to relatively modest efficiencies (<4%) owing to limitations such as poor exciton dissociation, limited photon harvesting, and high recombination losses. The development of the bulk heterojunction (BHJ) has significantly overcome these issues, resulting in dramatic improvements in organic photovoltaic performance, now exceeding 18% power conversion efficiencies. Here, the design and engineering strategies used to develop the optimal bulk heterojunction for solar-cell, photodetector, and photocatalytic applications are discussed. Additionally, the thermodynamic driving forces in the creation and stability of the bulk heterojunction are presented, along with underlying photophysics in these blends. Finally, new opportunities to apply the knowledge accrued from BHJ solar cells to generate free charges for use in promising new applications are discussed.

Electron-Deficient and Quinoid Central Unit Engineering for Unfused Ring-Based A1 -D-A2 -D-A1 -Type Acceptor Enables High Performance Nonfullerene Polymer Solar Cells with High Voc and PCE Simultaneously

Here, a pair of A₁ -D-A₂ -D-A₁ unfused ring core-based nonfullerene small molecule acceptors (NF-SMAs), BO2FIDT-4Cl and BT2FIDT-4Cl is synthesized, which possess the same terminals (A₁ ) and indacenodithiophene unit (D), coupling with different fluorinated electron-deficient central unit (difluorobenzoxadiazole or difluorobenzothiadiazole) (A₂ ). BT2FIDT-4Cl exhibits a slightly smaller optical bandgap of 1.56 eV, upshifted highest occupied molecular orbital energy levels, much higher electron mobility, and slightly enhanced molecular packing order in neat thin films than that of BO2FIDT-4Cl. The polymer solar cells (PSCs) based on BT2FIDT-4Cl:PM7 yield the best power conversion efficiency (PCE) of 12.5% with a V_oc of 0.97 V, which is higher than that of BO2FIDT-4Cl-based devices (PCE of 10.4%). The results demonstrate that the subtle modification of A₂ unit would result in lower trap-assisted recombination, more favorable morphology features, and more balanced electron and hole mobility in the PM7:BT2FIDT-4Cl blend films. It is worth mentioning that the PCE of 12.5% is the highest value in nonfused ring NF-SMA-based binary PSCs with high V_oc over 0.90 V. These results suggest that appropriate modulation of the quinoid electron-deficient central unit is an effective approach to construct highly efficient unfused ring NF-SMAs to boost PCE and V_oc simultaneously.

Branched versus linear: side-chain effect on fluorinated wide bandgap donors and their applications in organic solar cells

We report a new series of wide band-gap small organic molecules as donor-materials featuring an indaceno[1,2-b:5,6-b′]dithiophene (IDT) core and fluorinated thiophene linkers for solution-processed organic solar cells.

Symmetrical and unsymmetrical fluorine-rich ullazines via controlled cycloaromatizations

The synthesis of a series of electron-deficient pentafluorosulfanylated ullazines (U1–U10) by sequential electrophilic cycloaromatizations has been achieved.

Design of New n-Type Porphyrin Acceptors with Subtle Side-Chain Engineering for Efficient Nonfullerene Solar Cells with Low Energy Loss and Optoelectronic Response Covering the Near-Infrared Region

A series of tailor-made highly efficient and near-infrared (NIR) porphyrin-based acceptors is designed and synthesized for fullerene-free bulk-heterojunction (BHJ) organic solar cells. Constructing BHJ active layers using a PTB7-Th donor and porphyrin acceptors (P-x), which have complementary absorption, accomplishes panchromatic photon-to-current conversion from 300 to 950 nm. Our study shows that side chains of the porphyrin acceptors fairly influence the molecular ordering and nanomorphology of the BHJ active layers. Significantly, the porphyrin acceptor with four dodecoxyl side chains (P-2) achieves an open-circuit voltage (V_OC) of 0.80 V, short-circuit current density (J_SC) of 13.94 mA cm^-2, fill factor of 64.8%, and overall power conversion efficiency of 7.23%. This great performance is attributable to the ascendant light-harvesting capability in the visible and near-infrared region, a high-lying LUMO energy level, a relatively high and more balanced carrier mobilities, and more ordered face-on molecular packing, which is beneficial for obtaining high V_OC and J_SC.

High-yielding Pd2(dba)3·C6H6-based four-fold Sonogashira coupling with selenophene-conjugated magnesium tetraethynylporphyrin for organic solar cells

A catalytic system using Pd2(dba)3·(C6H6)/PPh3/CuI for Sonogashira coupling was demonstrated to synthesize a selenophene-conjugated magnesium tetraethynylporphyrin Mg-TEP-(Se-DPP)4 (2a). The catalytic system enabled four-fold cross-coupling of the four terminal alkynes of magnesium tetraethynylporphyrin with bromoselenophene-tethered diketopyrrolopyrroles (DPPs) to produce the desired star-shaped 2a in 80% yield. This molecule shows higher solubility in organic solvents, more efficient visible and near-infrared region absorption, and a narrower band gap compared with reference thiophene-conjugated congeners. Two strategies, namely, selenium substitution and end-capping, were investigated to optimize bulk heterojunction structures in the active layers of organic solar cells. The optimized device based on 2a:PC61BM exhibited the highest PCE of 6.09% among the tested devices after solvent vapor annealing, owing to efficient exciton dissociation, balanced carrier mobility, and suppressed carrier recombination in the film's ordered morphology.

Fluorinated Photovoltaic Materials for High-Performance Organic Solar Cells

Over the past decade, organic solar cells (OSCs) have achieved a dramatic boost in their power conversion efficiencies from about 6 % to over 16 %. In addition to developments in device engineering, innovative photovoltaic materials, especially fluorinated donors and acceptors, have become the dominant factor for improved device performance. This minireview highlights fluorinated photovoltaic materials that enable efficient OSCs. Impressive OSCs have been obtained by developing some important molds of fluorinated donor and acceptor systems. The molecular design strategy and the matching principle of fluorinated donors and acceptors in OSCs are discussed. Finally, a concise summary and outlook are presented for advances in fluorinated materials to realize the practical application of OSCs.

Efficient and thermally stable organic solar cells based on small molecule donor and polymer acceptor

Efficient organic solar cells (OSCs) often use combination of polymer donor and small molecule acceptor. Herein we demonstrate efficient and thermally stable OSCs with combination of small molecule donor and polymer acceptor, which is expected to expand the research field of OSCs. Typical small molecule donors show strong intermolecular interactions and high crystallinity, and consequently do not match polymer acceptors because of large-size phase separation. We develop a small molecule donor with suppressed π-π stacking between molecular backbones by introducing large steric hindrance. As the result, the OSC exhibits small-size phase separation in the active layer and shows a power conversion efficiency of 8.0%. Moreover, this OSC exhibits much improved thermal stability, i.e. maintaining 89% of its initial efficiency after thermal annealing the active layer at 180 °C for 7 days. These results indicate a different kind of efficient and stable OSCs.

A New Small-Molecule Donor Containing Non-Fused Ring π-Bridge Enables Efficient Organic Solar Cells with High Open Circuit Voltage and Low Acceptor Content

To achieve high open-circuit voltage (V_oc ) and low acceptor content, the molecular design of a small-molecule donor with low energy loss (E_loss ) is very important for solution-processable organic solar cells (OSCs). Herein, we designed and synthesized a new coplanar A-D-A structured organic small-molecule semiconductor with non-fused ring structure π-bridge, namely B2TPR, and applied it as donor material in OSCs. Owing to the strong electron-withdrawing effect of the end group and the coplanar π-bridge, B2TPR exhibits a low-lying highest occupied molecular orbital and strong crystallinity. Furthermore, benefiting from the coplanar molecular skeleton, the high hole mobility, balanced charge transport and reduced recombination were achieved, leading to a high fill factor (FF). The OSCs based on B2TPR : PC₇₁ BM blend film (w/w=1 : 0.35) demonstrates a moderate power conversion efficiency (PCE) of 7.10 % with a remarkable V_oc of 0.98 V and FF of 64 %, corresponding to a low fullerene content of 25.9 % and a low E_loss of 0.70 eV. These results demonstrate the great potential of small-molecule with structure of B2TPR for future low-cost organic photovoltaic applications.

Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance

Recent research efforts on solution-processed semitransparent organic solar cells (OSCs) are presented. Essential properties of organic donor:acceptor bulk heterojunction blends and electrode materials, required for the combination of simultaneous high power conversion efficiency (PCE) and average visible transmittance of photovoltaic devices, are presented from the materials science and device engineering points of view. Aspects of optical perception, charge generation-recombination, and extraction processes relevant for semitransparent OSCs are also discussed in detail. Furthermore, the theoretical limits of PCE for fully transparent OSCs, compared to the performance of the best reported semitransparent OSCs, and options for further optimization are discussed.

Alternating Tetrafluorobenzene and Thiophene Units by Direct Arylation for Organic Electronics

Direct arylation represents an attractive alternative to the conventional cross-coupling methods because of its step-economic and eco-friendly advantages. A set of simple D-A oligomeric molecules (F-3, F-5, and F-7) by integrating thiophene (T) and tetrafluorobenzene (F4B) as alternating units through a direct arylation strategy is presented to obtain high-performance charge-transporting materials. Single-crystal analysis revealed their herringbone packing arrangements driven by intensive C-H⋅⋅⋅π interactions. An excellent hole-transporting efficiency based on single-crystalline micro-plates/ribbons was witnessed, and larger π-conjugation and D-A constitution gave higher mobilities. Consequently, an average mobility of 1.31 cm²  V^-1  s^-1 and a maximum mobility of 2.44 cm²  V^-1  s^-1 for F-7 were achieved, providing an effective way to obtain high-performance materials by designing simple D-A oligomeric systems.

9,10-Dihydro- as-indacenodithiophenes: Isomers with an as-Indacene Core

Two isomers of 9,10-dihydro- as-indacenodithiophenes (DIDTs) and the corresponding diketones having an as-indacene core were synthesized. Their thermal, photophysical, and electrochemical properties were investigated, revealing that they depend on the direction of the fusion of the thiophene rings. For the DIDTs, the effect of the mode of ring fusion on the physical properties is discussed by comparison with the previously reported derivatives of DIDT isomers with an s-indacene core. The observed difference between the highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) levels of the DIDT isomers is ascribed to the efficiency of π-conjugation, which depends on α- or β-linkage between the terminal thiophenes with the central benzene ring. In addition, the effect of the peripheral aromatic ring (thiophene or benzene) is elucidated by comparison with indeno[2,1- a]fluorene (DIF) bearing an as-indacene core. The HOMO levels of DIDTs are significantly raised compared to that of structurally related DIF because of electron-donating character of the thiophene rings. For the DIDT diketones, structural effect due to the proximate carbonyl groups is discussed by comparison with the isomers with remote carbonyl groups. In diketones bearing proximate carbonyl groups, the LUMO levels are destabilized owing to antibonding interaction between the carbonyl oxygen atoms, resulting in approach of the LUMO and LUMO+1 energy levels.

Carrier Dynamics and Morphology Regulated by 1,8-Diiodooctane in Chlorinated Nonfullerene Polymer Solar Cells

Very small amounts of 1,8-diiodooctane (DIO) are very effective at optimizing the performance of polymer solar cells (PSCs). To date, the underlying influences are not yet fully understood, especially in nonfullerene PSCs. Herein, the influence of DIO on carrier dynamics and morphology in the PBDBT2Cl:IT4F system was investigated in detail. We combined the characterization of the transient dynamics with the morphology characterization of PSC devices to explore the origin of enhanced performance. Compared to the cast device, the champion device with 0.5% DIO revealed the maximum of current density ( J_sc) and fill factor (FF). The optimum DIO content helps to enhance carrier transport and optimize morphology, while excess DIO produces adverse effects due to the induced intense aggregation and dilated size in blend films. The results provide some hints of improved device performance upon using DIO as an additive in nonfullerene PSCs.

Over 12% Efficiency Nonfullerene All-Small-Molecule Organic Solar Cells with Sequentially Evolved Multilength Scale Morphologies

In this paper, two near-infrared absorbing molecules are successfully incorporated into nonfullerene-based small-molecule organic solar cells (NFSM-OSCs) to achieve a very high power conversion efficiency (PCE) of 12.08%. This is achieved by tuning the sequentially evolved crystalline morphology through combined solvent additive and solvent vapor annealing, which mainly work on ZnP-TBO and 6TIC, respectively. It not only helps improve the crystallinity of the ZnP-TBO and 6TIC blend, but also forms multilength scale morphology to enhance charge mobility and charge extraction. Moreover, it simultaneously reduces the nongeminate recombination by effective charge delocalization. The resultant device performance shows remarkably enhanced fill factor and J_sc . These result in a very respectable PCE, which is the highest among all NFSM-OSCs and all small-molecule binary solar cells reported so far.

Single-step access to a series of D–A π-conjugated oligomers with 3–10 nm chain lengths

A series of five D–A π-conjugated oligo(DPP-co-fluorene)s progressively consisting of 3, 5, 7, 9 and 11 monomers and with chain lengths ranging between 3 and 10 nm have all been synthesized in a single step by direct C–H arylated coupling.

High-Crystallinity π-Conjugated Small Molecules Based on Thienylene-Vinylene-Thienylene: Critical Role of Self-Organization in Photovoltaic, Charge-Transport, and Morphological Properties

Narrow-band-gap small molecules with π-extended backbones are promising donor materials for solution-processed bulk-heterojunction (BHJ) organic solar cells (OSCs). Herein, a series of acceptor-donor-acceptor (A-D-A) photovoltaic small molecules incorporating thienylene-vinylene-thienylene (TVT) as a central D unit and alkyl-substituted rhodanine or 2-(1,1-dicyanomethylene)rhodanine as terminal A units are designed and synthesized. Their physical properties including photoabsorption, electronic energy levels, hole mobility, and morphological characteristics are systematically investigated. Using solvent vapor annealing (SVA), the morphologies of the BHJ photoactive layers composed of these small-molecule donors and a [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) acceptor can be properly modulated. As a result of increased crystallinity of the donors and desired phase segregation between the donors and PC₇₁BM upon rapid SVA treatment, the photovoltaic performances of the resultant OSC devices undergo drastic enhancement. The results reported here indicate that high-efficiency small-molecule OSCs can be achieved through rational design of the TVT-based molecular framework and optimization of the nanoscale phase-segregated morphology via proper SVA treatment.

Impact of Terminal End-Group of Acceptor-Donor-Acceptor-type Small Molecules on Molecular Packing and Photovoltaic Properties

In this study, we synthesized two acceptor-donor-acceptor (A-D-A)-type small molecules (SMs) (P3T4-VCN and P3T4-INCN) with different terminal end-groups (dicyanovinyl (VCN) and 2-methylene-3-(1,1-dicyanomethylene)indanone (INCN)) based on the 1,4-bis(thiophenylphenylthiophene)-2,5-difluorophenylene (P3T4) core that possesses high coplanarity because of intrachain noncovalent Coulombic interactions. We investigated the influence of terminal end-groups on intermolecular packing and the resulting electrical and photovoltaic characteristics. A small change in the end-group structure of the SMs induces a significant variation in the torsional structures, molecular packing, and pristine/blend film morphology. It is noteworthy that the less crystalline P3T4-INCN with tilted conformation is highly sensitive to post-treatments (i.e., additives and annealing) such that it permits facile morphological modulation. However, the highly planar and crystalline P3T4-VCN exhibits a strong tolerance toward processing treatments. After morphology optimization, the fullerene-based bulk-heterojunction solar cell of tilted P3T4-INCN exhibits a power conversion efficiency (PCE) of 5.68%, which is significantly superior to that of P3T4-VCN:PC₇₁BM (PCE = 1.29%). Our results demonstrate the importance of the terminal end-group for the design of A-D-A-type SMs and their sensitivity toward the postprocessing treatments in optimizing their performance.