X-ray Spectroscopic Characterization of Co(IV) and Metal-Metal Interactions in Co4O4: Electronic Structure Contributions to the Formation of High-Valent States Relevant to the Oxygen Evolution Reaction

Deciphering Photoinduced Catalytic Reaction Mechanisms in Natural and Artificial Photosynthetic Systems on Multiple Temporal and Spatial Scales Using X-ray Probes

Utilization of renewable energies for catalytically generating value-added chemicals is highly desirable in this era of rising energy demands and climate change impacts. Artificial photosynthetic systems or photocatalysts utilize light to convert abundant CO2, H2O, and O2 to fuels, such as carbohydrates and hydrogen, thus converting light energy to storable chemical resources. The emergence of intense X-ray pulses from synchrotrons, ultrafast X-ray pulses from X-ray free electron lasers, and table-top laser-driven sources over the past decades opens new frontiers in deciphering photoinduced catalytic reaction mechanisms on the multiple temporal and spatial scales. Operando X-ray spectroscopic methods offer a new set of electronic transitions in probing the oxidation states, coordinating geometry, and spin states of the metal catalytic center and photosensitizers with unprecedented energy and time resolution. Operando X-ray scattering methods enable previously elusive reaction steps to be characterized on different length scales and time scales. The methodological progress and their application examples collected in this review will offer a glimpse into the accomplishments and current state in deciphering reaction mechanisms for both natural and synthetic systems. Looking forward, there are still many challenges and opportunities at the frontier of catalytic research that will require further advancement of the characterization techniques.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Evolution in the Design of Water Oxidation Catalysts with Transition-Metals: A Perspective on Biological, Molecular, Supramolecular, and Hybrid Approaches

Increased demand for a carbon-neutral sustainable energy scheme augmented by climatic threats motivates the design and exploration of novel approaches that reserve intermittent solar energy in the form of chemical bonds in molecules and materials. In this context, inspired by biological processes, artificial photosynthesis has garnered significant attention as a promising solution to convert solar power into chemical fuels from abundantly found H2O. Among the two redox half-reactions in artificial photosynthesis, the four-electron oxidation of water according to 2H2O → O2 + 4H+ + 4e- comprises the major bottleneck and is a severe impediment toward sustainable energy production. As such, devising new catalytic platforms, with traditional concepts of molecular, materials and biological catalysis and capable of integrating the functional architectures of the natural oxygen-evolving complex in photosystem II would certainly be a value-addition toward this objective. In this review, we discuss the progress in construction of ideal water oxidation catalysts (WOCs), starting with the ingenuity of the biological design with earth-abundant transition metal ions, which then diverges into molecular, supramolecular and hybrid approaches, blurring any existing chemical or conceptual boundaries. We focus on the geometric, electronic, and mechanistic understanding of state-of-the-art homogeneous transition-metal containing molecular WOCs and summarize the limiting factors such as choice of ligands and predominance of environmentally unrewarding and expensive noble-metals, necessity of high-valency on metal, thermodynamic instability of intermediates, and reversibility of reactions that create challenges in construction of robust and efficient water oxidation catalyst. We highlight how judicious heterogenization of atom-efficient molecular WOCs in supramolecular and hybrid approaches put forth promising avenues to alleviate the existing problems in molecular catalysis, albeit retaining their fascinating intrinsic reactivities. Taken together, our overview is expected to provide guiding principles on opportunities, challenges, and crucial factors for designing novel water oxidation catalysts based on a synergy between conventional and contemporary methodologies that will incite the expansion of the domain of artificial photosynthesis.

Generation, Spectroscopic Characterization, and Computational Analysis of a Six-Coordinate Cobalt(III)-Imidyl Complex with an Unusual S = 3/2 Ground State that Promotes N-Group and Hydrogen Atom-Transfer Reactions with Exogenous Substrates

We report the synthesis and characterization of a mononuclear nonheme cobalt(III)-imidyl complex, [Co(NTs)(TQA)(OTf)]+ (1), with an S = 3/2 spin state that is capable of facilitating exogenous substrate modifications. Complex 1 was generated from the reaction of CoII(TQA)(OTf)2 with PhINTs at -20 °C. A flow setup with ESI-MS detection was used to explore the kinetics of the formation, stability, and degradation pathway of 1 in solution by treating the Co(II) precursor with PhINTs. Co K-edge XAS data revealed a distinct shift in the Co K-edge compared to the Co(II) precursor, in agreement with the formation of a Co(III) intermediate. The unusual S = 3/2 spin state was proposed based on EPR, DFT, and CASSCF calculations and Co Kβ XES results. Co K-edge XAS and IR photodissociation (IRPD) spectroscopies demonstrate that 1 is a six-coordinate species, and IRPD and resonance Raman spectroscopies are consistent with 1 being exclusively the isomer with the NT ligand occupying the vacant site trans to the TQA aliphatic amine nitrogen atom. Electronic structure calculations (broken symmetry DFT and CASSCF/NEVPT2) demonstrate an S = 3/2 oxidation state resulting from the strong antiferromagnetic coupling of an •NTs spin to the high-spin S = 2 Co(III) center. Reactivity studies of 1 with PPh3 derivatives revealed its electrophilic characteristic in the nitrene-transfer reaction. While the activation of C-H bonds by 1 was proved to be kinetically challenging, 1 could oxidize weak O-H and N-H bonds. Complex 1 is, therefore, a rare example of a Co(III)-imidyl complex capable of exogenous substrate transformations.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Non-covalent ligand-oxide interaction promotes oxygen evolution

Strategies to generate high-valence metal species capable of oxidizing water often employ composition and coordination tuning of oxide-based catalysts, where strong covalent interactions with metal sites are crucial. However, it remains unexplored whether a relatively weak "non-bonding" interaction between ligands and oxides can mediate the electronic states of metal sites in oxides. Here we present an unusual non-covalent phenanthroline-CoO₂ interaction that substantially elevates the population of Co⁴⁺ sites for improved water oxidation. We find that phenanthroline only coordinates with Co²⁺ forming soluble Co(phenanthroline)₂(OH)₂ complex in alkaline electrolytes, which can be deposited as amorphous CoO_xH_y film containing non-bonding phenanthroline upon oxidation of Co²⁺ to Co^3+/4+. This in situ deposited catalyst demonstrates a low overpotential of 216 mV at 10 mA cm^-2 and sustainable activity over 1600 h with Faradaic efficiency above 97%. Density functional theory calculations reveal that the presence of phenanthroline can stabilize CoO₂ through the non-covalent interaction and generate polaron-like electronic states at the Co-Co center.

Altering Oxygen Binding by Redox-Inactive Metal Substitution to Control Catalytic Activity: Oxygen Reduction on Manganese Oxide Nanoparticles as a Model System

Establishing generic catalyst design principles by identifying structural features of materials that influence their performance will advance the rational engineering of new catalytic materials. In this study, by investigating metal-substituted manganese oxide (spinel) nanoparticles, Mn₃ O₄ :M (M=Sr, Ca, Mg, Zn, Cu), we rationalize the dependence of the activity of Mn₃ O₄ :M for the electrocatalytic oxygen reduction reaction (ORR) on the enthalpy of formation of the binary MO oxide, Δ_f H°(MO), and the Lewis acidity of the M²⁺ substituent. Incorporation of elements M with low Δ_f H°(MO) enhances the oxygen binding strength in Mn₃ O₄ :M, which affects its activity in ORR due to the established correlation between ORR activity and the binding energy of *O/*OH/*OOH species. Our work provides a perspective on the design of new compositions for oxygen electrocatalysis relying on the rational substitution/doping by redox-inactive elements.

Co-Fe-P Nanosheet Arrays as a Highly Synergistic and Efficient Electrocatalyst for Oxygen Evolution Reaction

The rational design and synthesis of highly efficient electrocatalysts for oxygen evolution reaction (OER) is of critical importance to the large-scale production of hydrogen by water electrolysis. Here, we develop a bimetallic, synergistic, and highly efficient Co-Fe-P electrocatalyst for OER, by selecting a two-dimensional metal-organic framework (MOF) of Co-ZIF-L as the precursor. The Co-Fe-P electrocatalyst features pronounced synergistic effects induced by notable electron transfer from Co to Fe, and a large electrochemical active surface area achieved by organizing the synergistic Co-Fe-P into hierarchical nanosheet arrays with disordered grain boundaries. Such features facilitate the generation of abundant and efficiently exposed Co³⁺ sites for electrocatalytic OER and thus enable Co-Fe-P to deliver excellent activity (overpotential and Tafel slope as low as 240 mV and 36 mV dec^-1, respectively, at a current density of 10 mA cm^-2 in 1.0 M KOH solution). The Co-Fe-P electrocatalyst also shows great durability by steadily working for up to 24 h. Our work thus provides new insight into the development of highly efficient electrocatalysts based on nanoscale and/or electronic structure engineering.

Ballistic ΔS = 2 intersystem crossing in a cobalt cubane following ligand-field excitation probed by extreme ultraviolet spectroscopy

Femtosecond M_2,3-edge X-ray absorption near-edge structure (XANES) spectroscopy is used to probe the excited-state dynamics of the cobalt cubane [Co^III₄O₄](OAc)₄(py)₄ (OAc = acetate, py = pyridine), a model for water oxidation catalysts. After ligand-field excitation, intersystem crossing (ISC) to a metal-centered quintet occurs in 38 fs. 30% of the hot quintet undergoes ballistic back-ISC directly to the singlet ground state, with the remainder relaxing to a long-lived triplet.

The electron-transfer intermediates of the oxygen evolution reaction (OER) as polarons by in situ spectroscopy

The conversion of diffusive forms of energy (electrical and light) into short, compact chemical bonds by catalytic reactions regularly involves moving a carrier from an environment that favors delocalization to one that favors localization. While delocalization lowers the energy of the carrier through its kinetic energy, localization creates a polarization around the carrier that traps it in a potential energy minimum. The trapped carrier and its local distortion-termed a polaron in solids-can play a role as a highly reactive intermediate within energy-storing catalytic reactions but is rarely discussed as such. Here, we present this perspective of the polaron as a catalytic intermediate through recent in situ and time-resolved spectroscopic investigations of photo-triggered electrochemical reactions at material surfaces. The focus is on hole-trapping at metal-oxygen bonds, denoted M-OH*, in the context of the oxygen evolution reaction (OER) from water. The potential energy surface for the hole-polaron defines the structural distortions from the periodic lattice and the resulting "active" site of catalysis. This perspective will highlight how current and future time-resolved, multi-modal probes can use spectroscopic signatures of M-OH* polarons to obtain kinetic and structural information on the individual reaction steps of OER. A particular motivation is to provide the background needed for eventually relating this information to relevant catalytic descriptors by free energies. Finally, the formation of the O-O chemical bond from the consumption of M-OH*, required to release O₂ and store energy in H₂, will be discussed as the next target for experimental investigations.

Polymer thin films as universal substrates for extreme ultraviolet absorption spectroscopy of molecular transition metal complexes

Polystyrene and polyvinyl chloride thin films are explored as sample supports for extreme ultraviolet (XUV) spectroscopy of molecular transition metal complexes. Thin polymer films prepared by slip-coating are flat and smooth, and transmit much more XUV light than silicon nitride windows. Analytes can be directly cast onto the polymer surface or co-deposited within it. The M-edge XANES spectra (40-90 eV) of eight archetypal transition metal complexes (M = Mn, Fe, Co, Ni) are presented to demonstrate the versatility of this method. The films are suitable for pump/probe transient absorption spectroscopy, as shown by the excited-state spectra of Fe(bpy)₃²⁺ in two different polymer supports.

The Oxo-Wall Remains Intact: A Tetrahedrally Distorted Co(IV)-Oxo Complex

In this paper, we report the preparation, spectroscopic and theoretical characterization, and reactivity studies of a Co(IV)-oxo complex bearing an N4-macrocyclic coligand, 12-TBC (12-TBC = 1,4,7,10-tetrabenzyl-1,4,7,10-tetraazacyclododecane). On the basis of the ligand and the structure of the Co(II) precursor, [Co^II(12-TBC)(CF₃SO₃)₂], one would assume that this species corresponds to a tetragonal Co(IV)-oxo complex, but the spectroscopic data do not support this notion. Co K-edge XAS data show that the treatment of the Co(II) precursor with iodosylbenzene (PhIO) as an oxidant at -40 °C in the presence of a proton source leads to a distinct shift in the Co K-edge, in agreement with the formation of a Co(IV) intermediate. The presence of the oxo group is further demonstrated by resonance Raman (rRaman) spectroscopy. Interestingly, the EPR data of this complex show a high degree of rhombicity, indicating structural distortion. This is further supported by the EXAFS data. Using DFT calculations, a structural model is developed for this complex with a ligand-protonated structure that features a Co═O···HN hydrogen bond and a four-coordinate Co center in a seesaw-shaped coordination geometry. Magnetic circular dichroism (MCD) spectroscopy further supports this finding. The hydrogen bond leads to an interesting polarization of the Co-oxo π-bonds, where one O(p) lone-pair is stabilized and leads to a regular Co(d) interaction, whereas the other π-bond shows an inverted ligand field. The reactivity of this complex in hydrogen atom and oxygen atom transfer reactions is discussed as well.

Intramolecular Hydrogen-Bond Interactions Tune Reactivity in Biomimetic Bis(μ-hydroxo)dicobalt Complexes

Active site hydrogen-bond (H-bond) networks represent a key component by which metalloenzymes control the formation and deployment of high-valent transition metal-oxo intermediates. We report a series of dinuclear cobalt complexes that serve as structural models for the nonheme diiron enzyme family and feature a Co₂(μ-OH)₂ diamond core stabilized by intramolecular H-bond interactions. We define the conditions required for the kinetically controlled synthesis of these complexes: [Co₂(μ-OH)₂(μ-OAc)(κ¹-OAc)₂(py^R)₄][PF₆] (1^R), where OAc = acetate and py^R = pyridine with para-substituent R, and we describe a homologous series of 1^R in which the para-R substituent on pyridine is modulated. The solid state X-ray diffraction (XRD) structures of 1^R are similar across the series, but in solution, their ¹H NMR spectra reveal a linear free energy relationship (LFER) where, as R becomes increasingly electron-withdrawing, the intramolecular H-bond interaction between bridging μ-OH and κ¹-acetate ligands results in increasingly "oxo-like" μ-OH bridges. Deprotonation of the bridging μ-OH results in the quantitative conversion to corresponding cubane complexes: [Co₄(μ-O)₄(μ₃-OAc)₄(py^R)₄] (2^R), which represent the thermodynamic sink of self-assembly. These reactions are unusually slow for rate-limiting deprotonation events, but rapid-mixing experiments reveal a 6000-fold rate acceleration on going from R = OMe to R = CN. These results suggest that we can tune reactivity by modulating the μ-OH pK_a in the presence of intramolecular H-bond interactions to maintain stability as the octahedral d⁶ centers become increasingly acidic. Nature may similarly employ dynamic carboxylate-mediated H-bond interactions to control the reactivity of acidic transition metal-oxo intermediates.

Do multinuclear 3d metal catalysts achieve O-O bond formation via radical coupling or via water nucleophilic attack? WNA leads the way in [Co4O4]n

Catalytic water oxidation is a required process for clean energy production based on the concept of artificial photosynthesis. Here, we provide in situ spectroscopic and computational analysis for the closest known photosystem II analog, [Co₄O₄]ⁿ⁺ ([Co₄O₄Py₄Ac₄]⁰, Py = pyridine and Ac = CH₃COO^-), which catalyzes electrochemical water oxidation. In situ extended X-ray absorption fine structure detects an ultrashort, Co^IV=O (~1.67 Å) moiety, a crucial intermediate for O-O bond formation. Density function theory analyses show that the intermediate has two Co^IV centers and a Co^IV=O unit of strong radicaloid character sufficient to support a Co^IV=O + H₂O = Co-OOH + H⁺ transition, where the carboxyl ligand accepts the proton and the bridging oxygen stabilizes the peroxide via hydrogen bonding. The proposed water nucleophilic attack mechanism accounts for all prior spectroscopic evidence on the Co₄O₄⁴⁺ core. Our results are important for the design and development of efficient water oxidation catalysts, which contribute to the ultimate goal of clean energy from artificial photosynthesis.

Detection of high-valent iron species in alloyed oxidic cobaltates for catalysing the oxygen evolution reaction

Iron alloying of oxidic cobaltate catalysts results in catalytic activity for oxygen evolution on par with Ni-Fe oxides in base but at much higher alloying compositions. Zero-field ⁵⁷Fe Mössbauer spectroscopy and X-ray absorption spectroscopy (XAS) are able to clearly identify Fe⁴⁺ in mixed-metal Co-Fe oxides. The highest Fe⁴⁺ population is obtained in the 40–60% Fe alloying range, and XAS identifies the ion residing in an octahedral oxide ligand field. The oxygen evolution reaction (OER) activity, as reflected in Tafel analysis of CoFeO_x films in 1 M KOH, tracks the absolute concentration of Fe⁴⁺. The results reported herein suggest an important role for the formation of the Fe⁴⁺ redox state in activating cobaltate OER catalysts at high iron loadings.

The capturing of high valent iron in a catalytic reaction is important but difficult task. Here, the authors report identification of a high-valent Fe(IV)-species with different spectroscopic tools such as Mössbauer spectroscopy and X-ray absorption spectroscopy during the course of an oxygen evolving reaction.

Dual Active Center-Assembled Cu31S16-Co9-xNixS8 Heterodimers: Coherent Interface Engineering Induces Multihole Accumulation for Light-Enhanced Electrocatalytic Oxygen Evolution

The design of low-cost yet highly efficient electrocatalysts plays a critical role in energy storage and conversion reactions. The oxygen evolution reaction (OER) is considered a bottleneck of electrochemical water splitting for hydrogen fuel generation. It is still challenging to extract a high density of charge carriers in noble-metal-free alternative catalysts to facilitate sluggish kinetics. Herein, we report the rational design and coherent interface engineering for combining light-harvesting Cu₃₁S₁₆ with electroactive Co_9-xNi_xS₈ (x = 0-9) to form novel Cu₃₁S₁₆-Co_9-xNi_xS₈ heterodimers. By delicately controlling the kinetic growth in a seed-mediated growth method, the bifunctional centers, even with two distinct crystal phases, were integrated into a synergistic architecture, which achieved full-spectrum solar energy capture and light conversion to drive and activate the electrochemical reaction. Benefiting from the well-defined structure, high-quality interface, oriented attachment, and optimal Co/Ni bimetal ratio, Cu₃₁S₁₆-Co_7.2Ni_1.8S₈ produces a dramatically reduced overpotential (242 mV at 10 mA cm^-2) with a shift of 83 mV under visible-light excitation, achieving a 4.5-fold higher turnover frequency than that of its unirradiated Co_7.2Ni_1.8S₈ counterpart. This enhanced performance also far exceeds commercial RuO₂ (358 mV at 10 mA cm^-2) and most nonprecious-metal nanocatalysts. Further mechanistic studies reveal that coherent interface engineering leads to a strong photo/electricity coupling effect and efficient spatial charge separation, which induces sufficient hot holes that eventually accumulate at the electroactive sites to accelerate the multihole-involved OER. This work would open up new opportunities for the fabrication of non-noble metal electrocatalysts and management of charge carriers.

Probing Physical Oxidation State by Resonant X-ray Emission Spectroscopy: Applications to Iron Model Complexes and Nitrogenase

The ability of resonant X-ray emission spectroscopy (XES) to recover physical oxidation state information, which may often be ambiguous in conventional X-ray spectroscopy, is demonstrated. By combining Kβ XES with resonant excitation in the XAS pre-edge region, resonant Kβ XES (or 1s3p RXES) data are obtained, which probe the 3dn+1 final-state configuration. Comparison of the non-resonant and resonant XES for a series of high-spin ferrous and ferric complexes shows that oxidation state assignments that were previously unclear are now easily made. The present study spans iron tetrachlorides, iron sulfur clusters, and the MoFe protein of nitrogenase. While 1s3p RXES studies have previously been reported, to our knowledge, 1s3p RXES has not been previously utilized to resolve questions of metal valency in highly covalent systems. As such, the approach presented herein provides chemists with means to more rigorously and quantitatively address challenging electronic-structure questions.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Unraveling the Overlooked Involvement of High-Valent Cobalt-Oxo Species Generated from the Cobalt(II)-Activated Peroxymonosulfate Process

Sulfate radical (SO₄^•-) is widely recognized as the predominant species generated from the cobalt(II)-activated peroxymonosulfate (PMS) process. However, in this study, it was surprisingly found that methyl phenyl sulfoxide (PMSO) was readily oxidized to the corresponding sulfone (PMSO₂) with a transformation ratio of ∼100% under acidic conditions, which strongly implied the generation of high-valent cobalt-oxo species [Co(IV)] instead of SO₄^•- in the Co(II)/PMS process. Scavenging experiments using methanol (MeOH), tert-butyl alcohol, and dimethyl sulfoxide further suggested the negligible role of SO₄^•- and hydroxyl radical (^•OH) but favored the generation of Co(IV). By employing ¹⁸O isotope-labeling technique, the formation of Co(IV) was conclusively verified and the oxygen atom exchange reaction between Co(IV) and H₂O was revealed. Density functional theory calculation determined that the formation of Co(IV) was thermodynamically favorable than that of SO₄^•- and ^•OH in the Co(II)/PMS process. The generated Co(IV) species was indicated to be highly reactive due to the existence of oxo-wall and capable of oxidizing the organic pollutant that is rather recalcitrant to SO₄^•- attack, for example, nitrobenzene. Additionally, the degradation intermediates of sulfamethoxazole (SMX) in the Co(II)/PMS process under acidic conditions were identified to further understand the interaction between Co(IV) and the representative contaminant. The developed kinetic model successfully simulated PMSO loss, PMSO₂ production, SMX degradation, and/or PMS decomposition under varying conditions, which further supported the proposed mechanism. This study might shed new light on the Co(II)/PMS process.

Concerted Proton-Electron Transfer Reactivity at a Multimetallic Co4O4 Cubane Cluster

High-valent oxocobalt(IV) species have been invoked as key intermediates in oxidative catalysis, but investigations into the chemistry of proton-coupled redox reactions of such species have been limited. Herein, the reactivity of an established water oxidation catalyst, [Co₄O₄(OAc)₄(py)₄][PF₆], toward H-atom abstraction reactions is described. Mechanistic analyses and density functional theory (DFT) calculations support a concerted proton-electron transfer (CPET) pathway in which the high energy intermediates formed in stepwise pathways are bypassed. Natural bond orbital (NBO) calculations point to cooperative donor-acceptor σ interactions at the transition state, whereby the H-atom of the substrate is transferred to an orbital delocalized over a Co₃(μ₃-O) fragment. The mechanistic insights provide design principles for the development of catalytic C-H activation processes mediated by a multimetallic oxo metal cluster.

HYSCORE and DFT Studies of Proton-Coupled Electron Transfer in a Bioinspired Artificial Photosynthetic Reaction Center

The photosynthetic water-oxidation reaction is catalyzed by the oxygen-evolving complex in photosystem II (PSII) that comprises the Mn₄CaO₅ cluster, with participation of the redox-active tyrosine residue (Y_Z) and a hydrogen-bonded network of amino acids and water molecules. It has been proposed that the strong hydrogen bond between Y_Z and D1-His190 likely renders Y_Z kinetically and thermodynamically competent leading to highly efficient water oxidation. However, a detailed understanding of the proton-coupled electron transfer (PCET) at Y_Z remains elusive owing to the transient nature of its intermediate states involving Y_Z⋅. Herein, we employ a combination of high-resolution two-dimensional ¹⁴N hyperfine sublevel correlation spectroscopy and density functional theory methods to investigate a bioinspired artificial photosynthetic reaction center that mimics the PCET process involving the Y_Z residue of PSII. Our results underscore the importance of proximal water molecules and charge delocalization on the electronic structure of the artificial reaction center.

•

Structural factors are critical in the design of artificial photosynthetic systems

•

Correlation between hyperfine couplings of the N atoms and electron spin density

•

Spin density distribution affected by charge delocalization and explicit waters

•

Spin density modulation by electronic coupling as observed with P₆₈₀ and Y_Z in PSII

Characterizing electronic and atomic structures for amorphous and molecular metal oxide catalysts at functional interfaces by combining soft X-ray spectroscopy and high-energy X-ray scattering

Amorphous thin film materials and heterogenized molecular catalysts supported on electrode and other functional interfaces are widely investigated as promising catalyst formats for applications in solar and electrochemical fuels catalysis. However the amorphous character of these catalysts and the complexity of the interfacial architectures that merge charge transport properties of electrode and semiconductor supports with discrete sites for multi-step catalysis poses challenges for probing mechanisms that activate and tune sites for catalysis. This minireview discusses advances in soft X-ray spectroscopy and high-energy X-ray scattering that provide opportunities to resolve interfacial electronic and atomic structures, respectively, that are linked to catalysis. This review discusses how these techniques can be partnered with advances in nanostructured interface synthesis for combined soft X-ray spectroscopy and high-energy X-ray scattering analyses of thin film and heterogenized molecular catalysts. These combined approaches enable opportunities for the characterization of both electronic and atomic structures underlying fundamental catalytic function, and that can be applied under conditions relevant to device applications.

Slower Removing Ligands of Metal Organic Frameworks Enables Higher Electrocatalytic Performance of Derived Nanomaterials

The widely used route of high-temperature pyrolysis for transformation of Prussian blue analogs (PBAs) to functional nanomaterials leads to the fast removal of CN^- ligands, and thus the formation of large metal aggregates and the loss of porous structures inside PBAs. Here, a controllable pyrolysis route at low temperature is reported for retaining the confined effect of CN^- ligands to metal cations during the whole pyrolysis process, thereby preparing high-surface-area cubes comprising disordered bimetallic oxides (i.e., Co₃ O₄ and Fe₂ O₃ ) nanoparticles. The disordered structure of Co₃ O₄ enables the exposure of abundant oxygen vacancies. Notably, for the first time, it is found that the in situ generated CoOOH during the oxygen evolution reaction (OER) can inherit the oxygen vacancies of pristine Co₃ O₄ (i.e., before OER), and such CoOOH with abundant oxygen vacancies adsorbs two ^- OH in the following Co³⁺ to Co⁴⁺ for markedly promoting OER. However, during the similar step, the ordered Co₃ O₄ with less oxygen vacancies only involves one ^- OH, resulting in the additional overpotentials for adsorbing ^- OH. Consequently, with high surface area and disordered Co₃ O₄ , the as-synthesized electrocatalysts have a low potential of 237 mV at 10 mA cm^-2 , surpassing most of reported electrocatalysts.

Simulations of valence excited states in coordination complexes reached through hard X-ray scattering

Hard X-ray spectroscopy selectively probes metal sites in complex environments. Resonant inelastic X-ray scattering (RIXS) makes it is possible to directly study metal-ligand interactions through local valence excitations. Here multiconfigurational wavefunction simulations are used to model valence K pre-edge RIXS for three metal-hexacyanide complexes by coupling the electric dipole-forbidden excitations with dipole-allowed valence-to-core emission. Comparisons between experimental and simulated spectra makes it possible to evaluate the simulation accuracy and establish a best-modeling practice. The calculations give correct descriptions of all LMCT excitations in the spectra, although energies and intensities are sensitive to the description of dynamical electron correlation. The consistent treatment of all complexes shows that simulations can rationalize spectral features. The dispersion in the manganese(iii) spectrum comes from unresolved multiple resonances rather than fluorescence, and the splitting is mainly caused by differences in spatial orientation between holes and electrons. The simulations predict spectral features that cannot be resolved in current experimental data sets and the potential for observing d-d excitations is also explored. The latter can be of relevance for non-centrosymmetric systems with more intense K pre-edges. These ab initio simulations can be used to both design and interpret high-resolution X-ray scattering experiments.

Unveiling Catalytic Sites in a Typical Hydrogen Photogeneration System Consisting of Semiconductor Quantum Dots and 3d-Metal Ions

Semiconductor quantum dots (QDs) in conjunction with non-noble 3d-metal ions (e.g., Fe³⁺, Co²⁺, and Ni²⁺) have emerged as an extremely efficient, facile, and cost-effective means of solar-driven hydrogen (H₂) evolution. However, the exact structural change of the active sites under realistic conditions remains elusive, and the mechanism of H₂ evolution behind the remarkable activity is poorly understood. Here, we successfully track the structural variation of the catalytic sites in the typical H₂ photogeneration system consisting of CdSe/CdS QDs and 3d-metal ions (i.e., Ni²⁺ used here). That is, the nickel precursor of Ni(OAc)₂ changes to Ni(H₂O)₆²⁺ in neutral H₂O and eventually transforms to Ni(OH)₂ nanosheets in alkaline media. Furthermore, the in operando spectroscopic techniques of electron paramagnetic resonance and X-ray absorption spectroscopy reveal the photoinduced transformation of Ni(OH)₂ to a defective structure [Ni_x⁰/Ni_1-x(OH)₂], which acts as the real catalytic species of H₂ photogeneration. Density functional theory (DFT) calculations further indicate that the surface Ni-vacancies (V_Ni) on the Ni(OH)₂ nanosheets enhance the adsorption and dissociation of H₂O molecules to enhance the local proton concentration, while the Ni⁰ clusters behave as H₂-evolution sites, thereby synergistically promoting the activity of H₂ photogeneration in alkaline media.

Highly Reactive CoIII,IV2(μ-O)2 Diamond Core Complex That Cleaves C-H Bonds

The selective activation of strong sp³ C-H bonds at mild conditions is a key step in many biological and synthetic transformations and an unsolved challenge for synthetic chemists. In nature, soluble methane monooxygenase (sMMO) is one representative example of nonheme dinuclear iron-dependent enzymes that activate strong sp³ C-H bonds by a high-valent diiron(IV) intermediate Q. To date, synthetic model complexes of sMMO-Q have shown limited abilities to oxidize strong C-H bonds. In this work, we generated a high-valent Co^III,IV₂(μ-O)₂ complex 3 supported by a tetradentate tris(2-pyridylmethyl)amine (TPA) ligand via one-electron oxidation of its Co^III₂(μ-O)₂ precursor 2. Characterization of 2 and 3 using X-ray absorption spectroscopy and DFT calculations showed that both species possess a diamond core structure with a short Co···Co distance of 2.78 Å. Furthermore, 3 is an EPR active species showing an S = 1/2 signal with clearly observable hyperfine splittings originated from the coupling of the ⁵⁹Co nuclear spin with the electronic spin. Importantly, 3 is a highly reactive oxidant for sp³ C-H bonds, and an oxygenation reagent. 3 has the highest rate constant (1.5 M^-1 s^-1 at -60 °C) for oxidizing 9,10-dihydroanthracene (DHA) compared to diamond core complexes of other first-row transition metals including Mn, Fe and Cu reported previously. Specifically, 3 is about 4-5 orders of magnitude more reactive than the diiron analogs Fe^III,IV₂(μ-O)₂ and Fe^IV₂(μ-O)₂ supported by TPA and related ligands. These findings shed light on future development of more reactive approaches for C-H bond activation by bioinspired dicobalt complexes.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Highly Selective Active Chlorine Generation Electrocatalyzed by Co3O4 Nanoparticles: Mechanistic Investigation through in Situ Electrokinetic and Spectroscopic Analyses

The reaction mechanism of electrochemical chloride oxidation at neutral pH is different from that at acidic pH, in which a commercial chlor-alkali process has been developed. Different proton concentrations and accelerated hydrolysis of the generated chlorine into hypochlorous acid at high pH can change the electrokinetics and stability of reaction intermediates. We have investigated a unique reaction mechanism of Co₃O₄ nanoparticles for chloride oxidation at neutral pH. In contrast with water oxidation, the valency of cobalt was not changed during chloride oxidation. Interestingly, a new intermediate of Co-Cl was captured spectroscopically, distinct from the reaction intermediate at acidic pH. In addition, Co₃O₄ nanoparticles exhibited high selectivity for active chlorine generation at neutral pH, comparable to commercially available RuO₂-based catalysts. We believe that this study provides insight into designing efficient electrocatalysts for active chlorine generation at neutral pH, which can be practically applied to electrochemical water treatment coupled to hydrogen production.

Significance of hydrogen bonding networks in the proton-coupled electron transfer reactions of photosystem II from a quantum-mechanics perspective

All quantum-mechanical calculations provide insights into the effect of the hydrogen bonding network on the proton-coupled electron transfer at Y_Z and Y_D in photosystem II.

Reactive Cobalt⁻Oxo Complexes of Tetrapyrrolic Macrocycles and N-based Ligand in Oxidative Transformation Reactions

High-valent cobalt–oxo complexes are reactive transient intermediates in a number of oxidative transformation processes e.g., water oxidation and oxygen atom transfer reactions. Studies of cobalt–oxo complexes are very important for understanding the mechanism of the oxygen evolution center in natural photosynthesis, and helpful to replicate enzyme catalysis in artificial systems. This review summarizes the development of identification of high-valent cobalt–oxo species of tetrapyrrolic macrocycles and N-based ligands in oxidation of organic substrates, water oxidation reaction and in the preparation of cobalt–oxo complexes.

A bio-inspired approach to ligand design: folding single-chain peptoids to chelate a multimetallic cluster

Synthesis of biomimetic multimetallic clusters is sought after for applications such as efficient storage of solar energy and utilization of greenhouse gases. However, synthetic efforts are hampered by a dearth of ligands that are developed for multimetallic clusters due to current limitations in rational design and organic synthesis. Peptoids, a synthetic sequence-defined oligomer, enable a biomimetic strategy to rapidly synthesize and optimize large, multifunctional ligands by structural design and combinatorial screening. Here we discover peptoid oligomers (≤7 residues) that fold into a single conformation to provide unprecedented tetra- and hexadentate chelation by carboxylates to a [Co4O4] cubane cluster. The structures of peptoid-bound cubanes were determined by 2D NMR spectroscopy, and their structures reveal key steric and side-chain-to-main chain interactions that work in concert to rigidify the peptoid ligand. This efficient ligand design strategy holds promise for creating new scaffolds for the abiotic synthesis and manipulation of multimetallic clusters.

A cocoon silk chemistry strategy to ultrathin N-doped carbon nanosheet with metal single-site catalysts

Development of single-site catalysts supported by ultrathin two-dimensional (2D) porous matrix with ultrahigh surface area is highly desired but also challenging. Here we report a cocoon silk chemistry strategy to synthesize isolated metal single-site catalysts embedded in ultrathin 2D porous N-doped carbon nanosheets (M-ISA/CNS, M = Fe, Co, Ni). X-ray absorption fine structure analysis and spherical aberration correction electron microscopy demonstrate an atomic dispersion of metal atoms on N-doped carbon matrix. In particular, the Co-ISA/CNS exhibit ultrahigh specific surface area (2105 m² g⁻¹) and high activity for C–H bond activation in the direct catalytic oxidation of benzene to phenol with hydrogen peroxide at room temperature, while the Co species in the form of phthalocyanine and metal nanoparticle show a negligible activity. Density functional theory calculations discover that the generated O = Co = O center intermediates on the single Co sites are responsible for the high activity of benzene oxidation to phenol.

Single-site catalysts supported by ultrathin two-dimensional (2D) porous matrix are desirable for catalytic reactions, yet their synthesis remains a great challenge. Herein the authors report a cocoon silk chemistry strategy to synthesize isolated metal single-site catalysts embedded in ultrathin 2D porous N-doped carbon nanosheets.