Cation-Deficient Spinel ZnMn2O4 Cathode in Zn(CF3SO3)2 Electrolyte for Rechargeable Aqueous Zn-Ion Battery

Constructing surface protective film of V-Se-O to promote zinc ion storage by surface oxygen implantation strategy

Interfacial chemical modification is an effective strategy to adjust the strong Coulombic ion-lattice interactions with high valence cations experienced by electrode materials, facilitating the reaction kinetic. In this paper, a simple and fast surface oxygen implantation strategy was designed to adjust the electronic structure of stainless steel (SS) supported vanadium diselenide (VSe2) nanosheets and form a surface protective film, which effectively accelerates the reaction kinetics of Zn2+ and extends the cycle life of the battery. It is demonstrated that the conductivity, pseudocapacitance and specific capacity can be tuned by selectively introducing oxygen species to the surface, which provides an important reference for the design of electrodes with controlled surface chemistry. Density functional theory (DFT) calculations also confirm that the electronic structure can be adjusted by surface oxygen injection strategy, which not only improves the conductivity, but also adjusts the adsorption energy, thus providing favorable conditions for zinc ion storage. Benefiting from the selenium vacancies and pores generated by the removal of part of selenium, and the oxide film formed on the surfaces, the VSe2-xOx-SS-30 electrode showed higher specific capacity (188.4 mAh/g at 0.5 A g-1 after 50 cycles), better rate performance (107.1 mAh/g at 4 A g-1) and more satisfactory cycling stability (83.1 mAh/g at 5 A g-1 after 1800 cycles) than VSe2-SS electrode. Importantly, the flexible quasi-solid-state VSe2-xOx-SS-30//Zn battery also exhibits high specific capacity and excellent environmental adaptability. Furthermore, the zinc (de)intercalation and transformation reactions mechanism was revealed by some ex-situ/in-situ techniques.

ZnMn2(PO4)2·nH2O: An H2O-Imbedding-Activated Cathode for Robust Aqueous Zinc-Ion Batteries

Component modulation endows Mn-based electrodes with prominent energy storage properties due to their adjustable crystal structure characteristics. Herein, ZnMn2(PO4)2·nH2O (ZMP·nH2O) was obtained by a hydration reaction from ZnMn2(PO4)2 (ZMP) during an electrode-aging evolution. Benefiting from the introduction of lattice H2O molecules into the ZMP structure, the ion transmission path has been expanded along with the extended d-spacing, which will further facilitate the ZMP → ZMP·nH2O phase evolution and electrochemical reaction kinetics. Meanwhile, the hydrogen bond can be generated between H2O and O in PO43-, which strengthens the structure stability of ZMP·nH2O and lowers the conversion barrier from ZMP to ZMP·4H2O during the Zn2+ uptake/removal process. Thereof, ZMP·nH2O delivers enhanced electrochemical reaction kinetics with robust structure tolerance (106.52 mA h g-1 at 100 mA g-1 over 620 cycles). This high-energy aqueous Zn||ZMP·nH2O battery provides a facile strategy for engineering and exploration of high-performance ZIBs to realize the practical application of Mn-based cathodes.

Investigating composite electrode materials of metal oxides for advanced energy storage applications

Electrochemical energy systems mark a pivotal advancement in the energy sector, delivering substantial improvements over conventional systems. Yet, a major challenge remains the deficiency in storage technology to effectively retain the energy produced. Amongst these are batteries and supercapacitors, renowned for their versatility and efficiency, which depend heavily on the quality of their electrode materials. Metal oxide composites, in particular, have emerged as highly promising due to the synergistic effects that significantly enhance their functionality and efficiency beyond individual components. This review explores the application of metal oxide composites in the electrodes of batteries and SCs, focusing on various material perspectives and synthesis methodologies, including exfoliation and hydrothermal/solvothermal processes. It also examines how these methods influence device performance. Furthermore, the review confronts the challenges and charts future directions for metal oxide composite-based energy storage systems, critically evaluating aspects such as scalability of synthesis, cost-effectiveness, environmental sustainability, and integration with advanced nanomaterials and electrolytes. These factors are crucial for advancing next-generation energy storage technologies, striving to enhance performance while upholding sustainability and economic viability.

Recent advances in zinc-ion dehydration strategies for optimized Zn-metal batteries

Aqueous Zn-metal batteries have attracted increasing interest for large-scale energy storage owing to their outstanding merits in terms of safety, cost and production. However, they constantly suffer from inadequate energy density and poor cycling stability due to the presence of zinc ions in the fully hydrated solvation state. Thus, designing the dehydrated solvation structure of zinc ions can effectively address the current drawbacks of aqueous Zn-metal batteries. In this case, considering the lack of studies focused on strategies for the dehydration of zinc ions, herein, we present a systematic and comprehensive review to deepen the understanding of zinc-ion solvation regulation. Two fundamental design principles of component regulation and pre-desolvation are summarized in terms of solvation environment formation and interfacial desolvation behavior. Subsequently, specific strategy based distinct principles are carefully discussed, including preparation methods, working mechanisms, analysis approaches and performance improvements. Finally, we present a general summary of the issues addressed using zinc-ion dehydration strategies, and four critical aspects to promote zinc-ion solvation regulation are presented as an outlook, involving updating (de)solvation theories, revealing interfacial evolution, enhancing analysis techniques and developing functional materials. We believe that this review will not only stimulate more creativity in optimizing aqueous electrolytes but also provide valuable insights into designing other battery systems.

Unveiling the Failure Mechanism of Zn Anodes in Zinc Trifluorosulfonate Electrolyte: The Role of Micelle-like Structures

Zinc trifluorosulfonate [Zn(OTf)2] is considered as the most suitable zinc salt for aqueous Zn-ion batteries (AZIBs) but cannot support the long-term cycling of the Zn anode. Here, we reveal the micelle-like structure of the Zn(OTf)2 electrolyte and reunderstand the failing mechanism of the Zn anode. Since the solvated Zn2+ possesses a positive charge, it can spontaneously attract OTf- with the hydrophilic group of -SO3 and the hydrophobic group of -CF3 via electrostatic interaction and form a "micelle-like" structure, which is responsible for the poor desolvation kinetics and dendrite growth. To address these issues, an antimicelle-like structure is designed by using ethylene glycol monomethyl ether (EGME) as a cosolvent for highly reversible AZIBs. The modified electrolyte shows lower dissociation ability to Zn(OTf)2 and higher coordination tendency with Zn2+ compared to the Zn(OTf)2 electrolyte, resulting in the unique solvation structure of Zn2+(H2O)1.2(OTf-)2(EGME)2.8, which significantly reduces the charge of micelle, damages the micelle-like structure, and boosts the desolvation kinetics. Moreover, the reduction of EGME and OTf- can form a robust dual-layered SEI with high Zn2+ ion conductivity. Consequently, the Zn/Cu asymmetric coin cell using ZT-EGME can work at a high rate and a capacity of 50 mA cm-2 and 5 mA h cm-2 for more than 120 cycles, while its counterparts using ZT can barely work. Moreover, a 505.1 mA h pouch cell with practical parameters including a lean electrolyte supply of 15 mL A h-1 and an N/P ratio of ∼3.5 can work for 50 cycles.

Vertical VOPO4·2H2O Nanosheets with Richly Exposed (200) Plane Enable Fast-Kinetics High-Mass-Loading Cathodes for Zn-Ion Batteries

Extending the layer spacing of the (001) planes to regulate the mobility of Zn2+ is widely adopted to optimize the performance of VOPO4·2H2O cathode for zinc-ion batteries. However, the unique function originating from other planes is often neglected. Herein, an effective in situ conversion methodology is proposed for the synthesis of the (200) oriented growth of vertical VOPO4·2H2O nanosheets with oxygen vacancies (VOd-VOPO4). Theoretical simulation and ex situ characterizations collaboratively demonstrate that the richly exposed (200) plane with tetragonal channels can offer quick pathways for in-layer and cross-layer migration of Zn2+, exhibiting enhanced transfer kinetics with improved reversible capacity. Meanwhile, efficient electron migration in VOd-VOPO4 is guaranteed by the introduction of oxygen vacancies. Thus, the as-prepared VOd-VOPO4 harvests exceptional discharge capacity, impressive rate capability, and remarkable long-cycle stability at high mass loading. Notably, the VOd-VOPO4 electrode (15 mg cm-2) provides a capacity of 213.5 mAh g-1 with an ultrahigh areal capacity of 3.02 mAh cm-2 at 0.1 A g-1, showing great potential for applications. This study highlights the orientated growth strategy for facilitating ion storage and migration, offering novel perspectives on the development of high-performance electrodes and beyond.

Electric Double Layer Oriented Eutectic Additive Design toward Stable Zn Anodes with a High Depth of Discharge

ZnSO4-based electrolytes for aqueous zinc ion batteries fail to meet practical application metrics due to hydrogen evolution reaction (HER) and dendrite growth. In this work, a highly polarized eutectic additive, glycerophosphorylcholine (GPC) is rationally designed, to regulate the electric double layer (EDL) structure for stable Zn anodes with a high depth of discharge (DOD). On one hand, GPC molecules with abundant hydroxyl groups can precisely regulate the hydrogen bond network in EDL to suppress HER. On the other hand, the enrichment of GPC at the interface is positively responsible for the negative charge density on the Zn surface, which leads to the formation of a robust ZnxPyOz-rich solid-electrolyte interphase and terminates dendrite growth in the charge-rich sites. This EDL-oriented eutectic additive engineering enables highly reversible and selectively (002)-textured Zn anodes to operate for over 1450 h at a high DOD of 45.3%. Meanwhile, a high-capacity (185.7 mAh g-1) aqueous Zn||VS2 full cell shows remarkable cycling stability over 220 cycles with an excellent capacity retention of 90.4% even at a low current density of 0.1 A g-1 (0.5 C). This work sheds light on electrolyte design and interface engineering for high-performance aqueous batteries.

Molecular Connectors Boosting the Performance of MoS2 Cathodes in Zinc-Ion Batteries

Zinc-ion batteries (ZIBs) are promising energy storage systems due to high energy density, low-cost, and abundant availability of zinc as a raw material. However, the greatest challenge in ZIBs research is lack of suitable cathode materials that can reversibly intercalate Zn2+ ions. 2D layered materials, especially MoS2-based, attract tremendous interest due to large surface area and ability to intercalate/deintercalate ions. Unfortunately, pristine MoS2 obtained by traditional protocols such as chemical exfoliation or hydrothermal/solvothermal methods exhibits limited electronic conductivity and poor chemical stability upon charge/discharge cycling. Here, a novel molecular strategy to boost the electrochemical performance of MoS2 cathode materials for aqueous ZIBs is reported. The use of dithiolated conjugated molecular pillars, that is, 4,4'-biphenyldithiols, enables to heal defects and crosslink the MoS2 nanosheets, yielding covalently bridged networks (MoS2-SH2) with improved ionic and electronic conductivity and electrochemical performance. In particular, MoS2-SH2 electrodes display high specific capacity of 271.3 mAh g-1 at 0.1 A g-1, high energy density of 279 Wh kg-1, and high power density of 12.3 kW kg-1. With its outstanding rate capability (capacity of 148.1 mAh g-1 at 10 A g-1) and stability (capacity of 179 mAh g-1 after 1000 cycles), MoS2-SH2 electrodes outperform other MoS2-based electrodes in ZIBs.

Anion Additive Integrated Electric Double Layer and Solvation Shell for Aqueous Zinc Ion Battery

Aqueous zinc ion batteries (AZIBs) show great potential in large-scale energy storage systems. However, the inferior cycling life due to water-induced parasitic reactions and uncontrollable dendrites growth impede their application. Electrolyte optimization via the use of additives is a promising strategy to enhance the stability of AZIBs. Nevertheless, the mechanism of optimal multifunctional additive strategy requires further exploration. Herein, sodium dodecyl benzene sulfonate (SDBS) is proposed as a dual-functional additive in ZnSO4 electrolyte. Benefiting from the additive, both side reactions and zinc dendrites growth are significantly inhibited. Further, a synchrotron radiational spectroscopic study is employed to investigate SDB- adjusted electric double layer (EDL) near the Zn surface and the optimized solvation sheath of Zn2+. First-principles calculations verify the firm adsorption of SDB-, and restriction of random diffusion of Zn2+ on the Zn surface. In particular, the SDBS additive endows Zn||Zn symmetric cells with a 1035 h ultra-stable plating/stripping at 0.2 mA cm-2. This work not only provides a promising design strategy by dual-functional electrolyte additives for high stable AZIBs, but also exhibits the prospect of synchrotron radiation spectroscopy analysis on surface EDL and Zn2+ solvation shell optimization.

Protons intercalation induced hydrogen bond network in δ-MnO2 cathode for high-performance aqueous zinc-ion batteries

Birnessite-type MnO2 (δ-MnO2) exhibits great potential as a cathode material for aqueous zinc-ion batteries (AZIBs). However, the structural instability and sluggish reaction kinetics restrict its further application. Herein, a unique protons intercalation strategy was utilized to simultaneously modify the interlayer environment and transition metal layers of δ-MnO2. The intercalated protons directly form strong O  H bonds with the adjacent oxygens, while the increased H2O molecules also establish a hydrogen bond network (O  H···O) between H2O molecules or bond with adjacent oxygens. Based on the Grotthuss mechanism, these bondings ultimately enhance the stability of layered structures and facilitate the rapid diffusion of protons. Moreover, the introduction of protons induces numerous oxygen vacancies, reduces steric hindrance, and accelerates ion transport kinetics. Consequently, the protons intercalated δ-MnO2 (H-MnO2-x) demonstrates exceptional specific capacity of 401.7 mAh/g at 0.1 A/g and a fast-charging performance over 1000 cycles. Density functional theory analysis confirms the improved electronic conductivity and reduced diffusion energy barrier. Most importantly, electrochemical quartz crystal microbalance tests combining with ex-situ characterizations verify the inhibitory effect of the interlayer proton environment on basic zinc sulfate formation. Protons intercalation behavior provides a promising avenue for the development of MnO2 as well as other cathodes in AZIBs.

Rice powder template for hausmannite Mn3O4 nanoparticles and its application to aqueous zinc ion battery

In this study, a simple calcination route was adopted to prepare hausmannite Mn3O4 nanoparticles using rice powder as soft bio-template. Prepared Mn3O4 was characterized by Fourier Transform Infra-Red Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray microanalysis (EDX), Powder X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Brunauer-Emmett-Teller (BET) and Solid state UV-Vis spectroscopic techniques. Mn-O stretching in tetrahedral site was confirmed by FTIR and Raman spectra. % of Mn and O content supported Mn3O4 formation. The crystallinity and grain size was found to be 68.76% and 16.43 nm, respectively; tetragonal crystal system was also cleared by XRD. TEM clarified the planes of crystal formed which supported the XRD results and BET demonstrated mesoporous nature of prepared Mn3O4 having low pore volume. Low optical band gap of 3.24 eV of prepared Mn3O4 nanoparticles indicated semiconductor property and was used as cathode material to fabricate CR-2032 coin cell of Aqueous Rechargeable Zinc Ion Battery (ARZIB). A reversible cyclic voltammogram (CV) showed good zinc ion storage performance. Low cell resistance was confirmed by Electrochemical Impedance Spectroscopy (EIS). The coin cell delivered high specific discharge capacity of 240.75 mAhg-1 at 0.1 Ag-1 current density. The coulombic efficiency was found to be 99.98%. It also delivered excellent capacity retention 94.45% and 64.81% after 300 and 1000 charge-discharge cycles, respectively. This work offers a facile and cost effective approach for preparing cathode material of ARZIBs.

A Pyrophosphate Bifunctional Cathode with Inductive Effect for High-Voltage and Self-Charging Zinc Ion Battery

With the growing demand for new energy storage devices, rechargeable aqueous zinc ion batteries (ZIBs) have attracted widespread attention due to their low cost and high safety. Among the cathode materials for ZIBs, polyanionic-based cathode materials with high voltage, high stability, and low cost have great potential. In this paper, tetragonal Na2VOP2O7 was prepared using a simple sol-gel method. The discharge platform voltage amounted to 1.8 V and had good rate and cycle performance due to the inductive effect of pyrophosphate. Then, a protective layer of Zn-hydroxyapatite (ZnHAP) modification was applied to the cathode surface, which can inhibit the hydrolysis of vanadium ions. The capacity was enhanced by 19 % after modification and the capacity retention after 100 cycles was also higher. Interestingly, the Na2VOP2O7 cathode also possesses a self-charging effect, recovering to 48 % of its initial capacity with an open-circuit voltage (OCV) of 1.1 V within a certain period, and light exposure can reduce the self-charging time by 83 %. These beneficial results indicate that the pyrophosphate bifunctional cathode with inductive effect has a great potential to construct high-voltage and multifunctional zinc ion battery.

Spin Symmetry Breaking-Induced Hubbard Gap Near-Closure in N-Coordinated MnO2 for Enhanced Aqueous Zinc-Ion Battery Performance

Transition metal oxides (TMOs) are promising cathode materials for aqueous zinc ion batteries (ZIBs), however, their performance is hindered by a substantial Hubbard gap, which limits electron transfer and battery cyclability. Addressing this, we introduce a heteroatom coordination approach, using triethanolamine to induce axial N coordination on Mn centers in MnO2, yielding N-coordinated MnO2 (TEAMO). This approach leverages the change of electronegativity disparity between Mn and ligands (O and N) to disrupt spin symmetry and augment spin polarization. This enhancement leads to the closure of the Hubbard gap, primarily driven by the intensified occupancy of the Mn eg orbitals. The resultant TEAMO exhibit a significant increase in storage capacity, reaching 351 mAh g-1 at 0.1 A g-1. Our findings suggest a viable strategy for optimizing the electronic structure of TMO cathodes, enhancing the potential of ZIBs in energy storage technology.

Cathode|Electrolyte Interface Engineering by a Hydrogel Polymer Electrolyte for a 3D Porous High-Voltage Cathode Material in a Quasi-Solid-State Zinc Metal Battery by In Situ Polymerization

This work highlights the development of a superior cathode|electrolyte interface for the quasi solid-state rechargeable zinc metal battery (QSS-RZMB) by a novel hydrogel polymer electrolyte using an ultraviolet (UV) light-assisted in situ polymerization strategy. By integrating the cathode with a thin layer of the hydrogel polymer electrolyte, this technique produces an integrated interface that ensures quick Zn2+ ion conduction. The coexistence of nanowires for direct electron routes and the enhanced electrolyte ion infiltration and diffusion by the 3D porous flower structure with a wide open surface of the Zn-MnO electrode complements the interface formation during the in situ polymerization process. The QSS-RZMB configured with an integrated cathode (i-Zn-MnO) and the hydrogel polymer electrolyte (PHPZ-30) as the separator yields a comparable specific energy density of 214.14 Wh kg-1 with that of its liquid counterpart (240.38 Wh kg-1, 0.5 M Zn(CF3SO3)2 aqueous electrolyte). Other noteworthy features of the presented QSS-RZMB system include its superior cycle life of over 1000 charge-discharge cycles and 85% capacity retention with 99% coulombic efficiency at the current density of 1.0 A g-1, compared to only 60% capacity retention over 500 charge-discharge cycles displayed by the liquid-state system under the same operating conditions.

Massively Reconstructing Hydrogen Bonding Network and Coordination Structure Enabled by a Natural Multifunctional Co-Solvent for Practical Aqueous Zn-Ion Batteries

The practical application of aqueous Zn-ion batteries (AZIBs) is hindered by the crazy Zn dendrites growth and the H2O-induced side reactions, which rapidly consume the Zn anode and H2O molecules, especially under the lean electrolyte and Zn anode. Herein, a natural disaccharide, d-trehalose (DT), is exploited as a novel multifunctional co-solvent to address the above issues. Molecular dynamics simulations and spectral characterizations demonstrate that DT with abundant polar -OH groups can form strong interactions with Zn2+ ions and H2O molecules, and thus massively reconstruct the coordination structure of Zn2+ ions and the hydrogen bonding network of the electrolyte. Especially, the strong H-bonds between DT and H2O molecules can not only effectively suppress the H2O activity but also prevent the rearrangement of H2O molecules at low temperature. Consequently, the AZIBs using DT30 electrolyte can show high cycling stability even under lean electrolyte (E/C ratio = 2.95 µL mAh-1), low N/P ratio (3.4), and low temperature (-12 °C). As a proof-of-concept, a Zn||LiFePO4 pack with LiFePO4 loading as high as 506.49 mg can be achieved. Therefore, DT as an eco-friendly multifunctional co-solvent provides a sustainable and effective strategy for the practical application of AZIBs.

Building Smarter Aqueous Batteries

Amidst the global trend of advancing renewable energies toward carbon neutrality, energy storage becomes increasingly critical due to the intermittency of renewables. As an alternative to lithium-ion batteries (LIBs), aqueous batteries have received growing attention for large-scale energy storage due to their economical and safe features. Despite the fruitful achievements at the material level, the reliability and lifetime of aqueous batteries are still far from satisfactory. Alike LIBs, integrating smartness is essential for more reliable and long-life aqueous batteries via operando monitoring and automatic response to extreme abuses. In this review, recent advances in sensing techniques and multifunctional battery-sensor systems together with self-healing methods in aqueous batteries is summarized. The significant role of artificial intelligence in designing and optimizing aqueous batteries with high efficiency is also highlighted. Ultimately, it is extrapolated toward the future and present the humble perspective for building smarter aqueous batteries.

Electrolyte and Additive Engineering for Zn Anode Interfacial Regulation in Aqueous Zinc Batteries

Aqueous Zn-metal batteries (AZMBs) have gained great interest due to their low cost, eco-friendliness, and inherent safety, which serve as a promising complement to the existing metal-based batteries, e.g., lithium-metal batteries and sodium-metal batteries. Although the utilization of aqueous electrolytes and Zn metal anode in AZMBs ensures their improved safety over other metal batteries meanwhile guaranteeing their decent energy density at the cell level, plenty of challenges involved with metallic Zn anode still await to be addressed, including dendrite growth, hydrogen evolution reaction, and zinc corrosion and passivation. In the past years, several attempts have been adopted to address these problems, among which engineering the aqueous electrolytes and additives is regarded as a facile and promising approach. In this review, a comprehensive summary of aqueous electrolytes and electrolyte additives will be given based on the recent literature, aiming at providing a fundamental understanding of the challenges associated with the metallic Zn anode in aqueous electrolytes, meanwhile offering a guideline for the electrolytes and additives engineering strategies toward stable AZMBs in the future.

Structure regulation and synchrotron radiation investigation of cathode materials for aqueous Zn-ion batteries

In view of the advantages of low cost, environmental sustainability, and high safety, aqueous Zn-ion batteries (AZIBs) are widely expected to hold significant promise and increasingly infiltrate various applications in the near future. The development of AZIBs closely relates to the properties of cathode materials, which depend on their structures and corresponding dynamic evolution processes. Synchrotron radiation light sources, with their rich advanced experimental methods, serve as a comprehensive characterization platform capable of elucidating the intricate microstructure of cathode materials for AZIBs. In this review, we initially examine available cathode materials and discuss effective strategies for structural regulation to boost the storage capability of Zn2+. We then explore the synchrotron radiation techniques for investigating the microstructure of the designed materials, particularly through in situ synchrotron radiation techniques that can track the dynamic evolution process of the structures. Finally, the summary and future prospects for the further development of cathode materials of AZIBs and advanced synchrotron radiation techniques are discussed.

A Review of Macrocycles Applied in Electrochemical Energy Storge and Conversion

Macrocycles composed of diverse aromatic or nonaromatic structures, such as cyclodextrins (CDs), calixarenes (CAs), cucurbiturils (CBs), and pillararenes (PAs), have garnered significant attention due to their inherent advantages of possessing cavity structures, unique functional groups, and facile modification. Due to these distinctive features enabling them to facilitate ion insertion and extraction, form crosslinked porous structures, offer multiple redox-active sites, and engage in host-guest interactions, macrocycles have made huge contributions to electrochemical energy storage and conversion (EES/EEC). Here, we have summarized the recent advancements and challenges in the utilization of CDs, CAs, CBs, and PAs as well as other novel macrocycles applied in EES/EEC devices. The molecular structure, properties, and modification strategies are discussed along with the corresponding energy density, specific capacity, and cycling life properties in detail. Finally, crucial limitations and future research directions pertaining to these macrocycles in electrochemical energy storage and conversion are addressed. It is hoped that this review is able to inspire interest and enthusiasm in researchers to investigate macrocycles and promote their applications in EES/EEC.

Towards More Sustainable Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are considered as the promising candidates for large-scale energy storage because of their high safety, low cost and environmental benignity. The large-scale applications of AZIBs will inevitably result in a large amount of spent AZIBs, which not only induce the waste of resources, but also pose environmental risks. Therefore, sustainable AZIBs have to be considered to minimize the risk of environmental pollution and maximize the utilization of spent compounds. Herein, this minireview focuses on the sustainability of AZIBs from material design and recycling techniques. The structure and degradation mechanism of AZIBs are discussed to guide the recycling design of the materials. Subsequently, the sustainability of component materials in AZIBs is further analysed to pre-evaluate their recycling behaviors and mentor the selection of more sustainable component materials, including active materials in cathodes, Zn anodes, and aqueous electrolytes, respectively. According to the features of component materials, corresponding green and economic approaches are further proposed to realize the recycling of active materials in cathodes, Zn anodes and electrolytes, respectively. These advanced technologies endow the recycling of component materials with high efficiency and a closed-loop control, ensuring that AZIBs will be the promising candidates of sustainable energy storage devices. This review will offer insight into potential future directions in the design of sustainable AZIBs.

Insights into the cycling stability of manganese-based zinc-ion batteries: from energy storage mechanisms to capacity fluctuation and optimization strategies

Manganese-based materials are considered as one of the most promising cathodes in zinc-ion batteries (ZIBs) for large-scale energy storage applications owing to their cost-effectiveness, natural availability, low toxicity, multivalent states, high operation voltage, and satisfactory capacity. However, their intricate energy storage mechanisms coupled with unsatisfactory cycling stability hinder their commercial applications. Previous reviews have primarily focused on optimization strategies for achieving high capacity and fast reaction kinetics, while overlooking capacity fluctuation and lacking a systematic discussion on strategies to enhance the cycling stability of these materials. Thus, in this review, the energy storage mechanisms of manganese-based ZIBs with different structures are systematically elucidated and summarized. Next, the capacity fluctuation in manganese-based ZIBs, including capacity activation, degradation, and dynamic evolution in the whole cycle calendar are comprehensively analyzed. Finally, the constructive optimization strategies based on the reaction chemistry of one-electron and two-electron transfers for achieving durable cycling performance in manganese-based ZIBs are proposed.

Tunneling Proton Grotthuss Transfer Channels by Hydrophilic-Zincophobic Heterointerface Shielding for High-Performance Zn-MnO2 Batteries

Hollandite-type manganese dioxide (α-MnO2) is recognized as a promising cathode material upon high-performance aqueous zinc-ion batteries (ZIBs) owing to the high theoretical capacities, high working potentials, unique Zn2+/H+ co-insertion chemistry, and environmental friendliness. However, its practical applications limited by Zn2+ accommodation, where the strong coulombic interaction and sluggish kinetics cause significant lattice deformation, fast capacity degradation, insufficient rate capability, and undesired interface degradation. It remains challenging to accurately modulate H+ intercalation while suppressing Zn2+ insertion for better lattice stability and electrochemical kinetics. Herein, proton Grotthuss transfer channels are first tunneled by shielding MnO2 with hydrophilic-zincophobic heterointerface, fulfilling the H+-dominating diffusion with the state-of-the-art ZIBs performance. Local atomic structure and theoretical simulation confirm that surface-engineered α-MnO2 affords to the synergy of Mn electron t2g-eg activation, oxygen vacancy enrichment, selective H+ Grotthuss transfer, and accelerated desolvation kinetics. Consequently, fortified α-MnO2 achieves prominent low current density cycle stability (≈100% capacity retention at 1 C after 400 cycles), remarkable long-lifespan cycling performance (98% capacity retention at 20 C after 12 000 cycles), and ultrafast rate performance (up to 30 C). The study exemplifies a new approach of heterointerface engineering for regulation of H+-dominating Grotthuss transfer and lattice stabilization in α-MnO2 toward reliable ZIBs.

Interfacial Engineering for Oriented Crystal Growth toward Dendrite-Free Zn Anode for Aqueous Zinc Metal Battery

Zn deposition with a surface-preferred (002) crystal plane has attracted extensive attention due to its inhibited dendrite growth and side reactions. However, the nucleation and growth of the Zn(002) crystal plane are closely related to the interfacial properties. Herein, oriented growth of Zn(002) crystal plane is realized on Ag-modified surface that is directly visualized by in situ atomic force microscopy. A solid solution HCP-Zn (~1.10 at. % solubility of Ag, 30 °C) is formed on the Ag coated Zn foil (Zn@Ag) and possesses the same crystal structure as Zn to reduce its nucleation barrier caused by their lattice mismatch. It merits oriented Zn deposition and corrosion-resistant surface, and presents long cycling stability in symmetric cells and full cells coupled with V2O5 cathode. This work provides insights into interfacial regulation of Zn anodes for high-performance aqueous zinc metal batteries.

Highly reversible zinc metal anode enabled by strong Brønsted acid and hydrophobic interfacial chemistry

Uncontrollable zinc (Zn) plating and hydrogen evolution greatly undermine Zn anode reversibility. Previous electrolyte designs focus on suppressing H2O reactivity, however, the accumulation of alkaline byproducts during battery calendar aging and cycling still deteriorates the battery performance. Here, we present a direct strategy to tackle such problems using a strong Brønsted acid, bis(trifluoromethanesulfonyl)imide (HTFSI), as the electrolyte additive. This approach reformulates battery interfacial chemistry on both electrodes, suppresses continuous corrosion reactions and promotes uniform Zn deposition. The enrichment of hydrophobic TFSI- anions at the Zn|electrolyte interface creates an H2O-deficient micro-environment, thus inhibiting Zn corrosion reactions and inducing a ZnS-rich interphase. This highly acidic electrolyte demonstrates high Zn plating/stripping Coulombic efficiency up to 99.7% at 1 mA cm-2 ( > 99.8% under higher current density and areal capacity). Additionally, Zn | |ZnV6O9 full cells exhibit a high capacity retention of 76.8% after 2000 cycles.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Porous layered ZnV2O4@C synthesized based on a bimetallic MOF as a stable cathode material for aqueous zinc ion batteries

Vanadium-based oxides are considered potential cathode materials for aqueous zinc ion batteries (AZIBs) due to their distinctive layered (or tunnel) structure suitable for zinc ion storage. However, the structural instability and sluggish kinetics of vanadium-based oxides have limited their capacity and cycling stability for large-scale applications. To overcome these shortcomings, here a porous vanadium-based oxide doped with zinc ions and carbon with the molecular formula ZnV2O4@C (ZVO@C) as the cathode material is synthesized by the pyrolysis of a bimetallic MOF precursor containing Zn/V. This electrode demonstrates a remarkable specific capacity of 425 mA h g-1 at 0.5 A g-1 and excellent cycling stability with about 97% capacity retention after 1000 cycles at 10 A g-1. The excellent electrochemical performance of ZVO@C can be attributed to more reaction active sites and the faster reaction kinetics for zinc ion diffusion and storage brought about by the porous layered spinel-type tunnel structure with high surface area and massive mesoporosity, as well as the enhanced electron transport efficiency and more stable channel structure achieved from the doped conductive carbon. The reaction mechanism and structural evolution of the ZVO@C electrode are analyzed using X-ray diffraction and X-ray photoelectron spectroscopy, revealing the formation of a new phase of ZnxV2O5·nH2O during the first charge, which participates in reversible cycling together with ZVO@C during the charging and discharging processes. Moreover, the energy storage mechanism is revealed, in which zinc ions and hydrogen ions jointly participate in intercalation and extraction. The present study demonstrates that constructing composite vanadium-based oxides based on bimetallic organic frameworks as precursor templates is an effective strategy for the development of high-performance cathode materials for AZIBs.

Towards Superior Aqueous Zinc-Ion Batteries: The Insights of Artificial Protective Interfaces

Aqueous zinc ion batteries (AZIBs) with metallic Zn anode have the potential for large-scale energy storage application due to their cost-effectiveness, safety, environmental-friendliness, and ease of preparation. However, the concerns regarding dendrite growth and side reactions on Zn anode surface hamper the commercialization of AZIBs. This review aims to give a comprehensive evaluation of the protective interphase construction and provide guidance to further improve the electrochemical performance of AZIBs. The failure behaviors of the Zn metal anode including dendrite growth, corrosion, and hydrogen evolution are analyzed. Then, the applications and mechanisms of the constructed interphases are introduced, which are classified by the material species. The fabrication methods of the artificial interfaces are summarized and evaluated, including the in-situ strategy and ex-situ strategy. Finally, the characterization means are discussed to give a full view for the study of Zn anode protection. Based on the analysis of this review, a stable and high-performance Zn anode could be designed by carefully choosing applied material, corresponding protective mechanism, and appropriate construction technique. Additionally, this review for Zn anode modification and construction techniques for anode protection in AZIBs may be helpful in other aqueous metal batteries with similar problems.

Unveiling the Mysteries: Acetonitrile's Dance with Weakly-Solvating Electrolytes in Shaping Gas Evolution and Electrochemical Performance of Zinc-ion Batteries

Aqueous Zn-metal battery (AZMB) is a promising candidate for future large-scale energy storage with commendable capacity, exceptional safety characteristics, and low cost. Acetonitrile (AN) has been widely used as an effective electrolyte constituent to improve AZMBs' performance. However, its functioning mechanisms remain unclear. In this study, we unveiled the critical roles of AN in AZMBs via comparative in situ electrochemical, gaseous, and morphological analyses. Despite its limited ability to solvate Zn ions, AN-modulated Zn-ion solvation sheath with increased anions and decreased water achieves a weakly-solvating electrolyte. As a result, the Zn||Zn cell with AN addition exhibited 63 times longer cycle life than cell without AN and achieved a 4 Ah cm-2 accumulated capacity with no H2 generation. In V2O5||Zn cells, for the first time, AN suppressing CO2 generation, elevating CO2-initiation voltage from 2→2.44 V (H2: 2.43→2.55 V) was discovered. AN-impeded transit and Zn-side deposition of dissolved vanadium ions, known as "crosstalk," ameliorated inhomogeneous Zn deposition and dendritic Zn growth. At last, we demonstrated an AN-enabled high-areal-capacity AZMB (3.3 mAh cm-2) using high-mass-loading V2O5 cathode (26 mg cm-2). This study shed light on the strategy of constructing fast-desolvation electrolytes and offered insights for future electrolyte accommodation for high-voltage AZMB cathodes.

Understanding the Super-Theoretical Capacity Behavior of VO2 in Aqueous Zn Batteries

VO2 material, as a promising intercalation host, is widely investigated not only in aqueous lithium-ion batteries, but also in aqueous zinc-ion batteries (AZIBs) owing to its stable tunnel-like framework and multivalence of vanadium. Different from lithium-ion storage, VO2 can provide higher capacity when storing zinc ions, even exceeding its theoretical capacity (323 mAh g-1), but the specific reason for this unconventional performance in AZIBs is still unclear. The present study proposes a catalytic oxygen evolution reaction (OER) coupled with an interface oxidation mechanism of VO2 during the initial charging to a high voltage. This coupling induces a phase transformation of VO2 into a high oxidation state of V5O12∙6H2O, enabling a nearly two-electron reaction and providing additional zinc storage sites to achieve super-theoretical capacity. Furthermore, it is demonstrated that these vanadium oxide cathodes (V2O3, VO2, and V2O5) will all undergo phase change after the first charge or short cycle. Notably, water molecules participate in the final formation of layered vanadium-based hydrate, highlighting their crucial role as "pillars" for stabilizing the structure. This work significantly enhances the understanding of vanadium-based oxide cathodes.

Electrocatalytic reduction of furfural to furfuryl alcohol using carbon nanofibers supported zinc cobalt bimetallic oxide with surface-derived zinc vacancies in alkaline medium

Electrocatalytic hydrogenation (ECH) reduction provides an environment-friendly alternative to conventional method for the upgrade of furfural to furfuryl alcohol. At present, exploring superior catalysts with high activity and selectivity, figuring out the reduction mechanism in aqueous alkaline environment are urgent. In this work, zinc cobalt bimetallic oxide (ZnMn2O4) with surface-derived Zn2+ vacancies supported by carbon nanofibers (d-ZnMn2O4-C) was fabricated. The d-ZnMn2O4-C exhibited excellent performance in electrocatalytic reduction of furfural, high furfuryl alcohol yield (49461.1 ± 228 µmol g-1) and Faradaic efficiency (95.5 ± 0.5 %) was obtained. In-depth research suggested that carbon nanofiber may strongly promoted the production of adsorbed hydrogen (Hads), and Zn2+ vacancies may significantly lowered the energy barrier of furfural reduction to furfuryl alcohol, the synergistic effect between carbon nanofiber and d-ZnMn2O4 probably facilitated the reaction between Hads and furfuryl alcohol radical, thereby promoting the formation of furfuryl alcohol. Furthermore, the reaction mechanism was clarified by inhibitor coating and isotope experiments, the results of which revealed that the conversion of furfural to furfuryl alcohol on d-ZnMn2O4-C followed both ECH and direct electroreduction mechanism.

Enabling High Reversibility of Zn anode via Interfacial Engineering Induced by Amino acid Electrolyte Additive

Despite possessing substantial benefits of enhanced safety and cost-effectiveness, the aqueous zinc ion batteries (AZIBs) still suffers with the critical challenges induced by inherent instability of Zn metal in aqueous electrolytes. Zn dendrites, surface passivation, and corrosion are some of the key challenges governed by water-driven side reactions in Zn anodes. Herein, a highly reversible Zn anode is demonstrated via interfacial engineering of Zn/electrolyte driven by amino acid D-Phenylalanine (DPA) additions. The preferential adsorption of DPA and the development of compact SEI on the Zn anode suppressed the side reactions, leading to controlled and uniform Zn deposition. As a result, DPA added aqueous electrolyte stabilized Zn anode under severe test environments of 20.0 mA cm-2 and 10.0 mAh cm-2 along with an average plating/stripping Coulombic efficiency of 99.37%. Under multiple testing conditions, the DPA-incorporated electrolyte outperforms the control group electrolyte, revealing the critical additive impact on Zn anode stability. This study advances interfacial engineering through versatile electrolyte additive(s) toward development of stable Zn anode, which may lead to its practical implementation in aqueous rechargeable zinc batteries.

Activating the MnS0.5Se0.5 Microspheres as High-Performance Cathode Materials for Aqueous Zinc-Ion Batteries: Insight into In Situ Electrooxidation Behavior and Energy Storage Mechanisms

Manganese-based materials are regarded as the most prospective cathode materials because of their high natural abundance, low toxicity, and high specific capacity. Nevertheless, the low conductivity, poor cycling performance, and controversial energy storage mechanisms hinder their practical application. Here, the MnS0.5Se0.5 microspheres are synthesized by a two-step hydrothermal approach and employed as cathode materials for aqueous zinc-ion batteries (AZIBs) for the first time. Interestingly, in-depth ex situ tests and electrochemical kinetic analyses reveal that MnS0.5Se0.5 is first irreversibly converted into low-crystallinity ZnMnO3 and MnOx by in situ electrooxidation (MnS0.5Se0.5-EOP) during the first charging process, and then a reversible co-insertion/extraction of H+/Zn2+ occurs in the as-obtained MnS0.5Se0.5-EOP electrode during the subsequent discharging and charging processes. Benefiting from the increased surface area, shortened ion transport path, and stable lamellar microsphere structure, the MnS0.5Se0.5-EOP electrodes deliver high reversible capacity (272.8 mAh g-1 at 0.1 A g-1), excellent rate capability (91.8 mAh g-1 at 2 A g-1), and satisfactory cyclic stability (82.1% capacity retention after 500 cycles at 1 A g-1). This study not only provides a powerful impetus for developing new types of manganese-based chalcogenides, but also puts forward a novel perspective for exploring the intrinsic mechanisms of in situ electrooxidation behavior.

Waste to treasure: Electrocatalytic upcycling of n-valeraldehyde to octane by Zn-Co bimetallic oxide with atomic level cation defect

n-Valeraldehyde is widely used in organic synthesis field as an important intermediate and feedstock, which makes it a significant class of environmental pollutants. In view of the high poisonous and harmful of n-valeraldehyde to human health and ecological environment, it is important to develop green and sustainable technology to reduce the pollution of n-valeraldehyde. In this work, electrocatalytic n-valeraldehyde oxidation using Zn-Co bimetallic oxides was applied to control n-valeraldehyde contamination and highly valuable octane production. To further improve the performance of Zn-Co bimetallic oxides, atomic level Zn vacancies were created across the Zn-Co bimetallic oxides (dx-ZnCo2O4) by post-etching and oxygen vacancy filling methods. Electrochemical experiments results showed that dx-ZnCo2O4 owned a much higher octane yield (1193.4 µmol g-1 h-1) and octane selectivity (octane/butene ≈10). Theoretical calculations demonstrated that the introduction of atomic level Zn vacancies in Zn-Co bimetallic oxide changed the electronic distribution around O, Co and Zn atoms, resulted in an alteration in n-valeraldehyde adsorption sites from Co to Zn, reduced the formation barrier of key intermediate *C4H9 and facilitated the transfer of n-valeraldehyde to octane. This study provides a new idea for the development of high-performance electrocatalysts for controlling n-valeraldehyde pollution.

The Compatibility of COFs Cathode and Optimized Electrolyte for Ultra-Long Lifetime Rechargeable Aqueous Zinc-Ion Battery

Rechargeable aqueous zinc-ion batteries (RAZIBs) are attractive due to their affordability, safety, and eco-friendliness. However, their potential is limited by the lack of high-capacity cathodes and compatible electrolytes needed for reliable performance. Herein, we have presented a compatibility strategy for the development of a durable and long-lasting RAZIBs. The covalent organic frameworks (COFs) based on anthraquinone (DAAQ-COF) is created and utilized as the cathode, with zinc metal serving as the anode. The electrolyte is made up of an aqueous solution containing zinc salts at various concentrations. The COF cathode has been designed to be endowed with a rich array of redox-active groups, enhancing its electrochemical properties. Meanwhile, the electrolyte is formulated using triflate anions, which have exhibited superiority over sulfate anions. This strategy lead to the development of an optimized COF cathode with fast charging capability, high Coulombic efficiency (nearly 100 %) and long-term cyclability (retention rate of nearly 100 % at 1 A g-1 after 10000 cycles). Moreover, through experimental analysis, a co-insertion mechanism involving Zn2+ and H+ in this cathode is discovered for the first time. These findings represent a promising path for the advancement of organic cathode materials in high-performance and sustainable RAZIBs.

Vanadate-Based Fibrous Electrode Materials for High Performance Aqueous Zinc Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are considered as attractive energy storage systems with great promise owing to their low cost, environmental friendliness and high safety. Nevertheless, cathode materials with stable structure and rapid diffusion of zinc ions are in great demand for AZIBs. In this work, a new kind of potassium vanadate compound (KV3 O8 ) is synthesized with fibrous morphology as an excellent cathode material for AZIBs, which shows outstanding electrochemical performance. KV3 O8 exhibits a high discharge capacity of 556.4 mAh g-1 at 0.8 A g-1 , and the capacity retention is 81.3% at 6 A g-1 even after a long cycle life of 5000 cycles. The excellent performance of the KV3 O8 cathode is benefited from the structural stability, sufficient active sites, and high conductivity, which is revealed by in situ X-ray diffraction and various other characterizations. This work offers a new design strategy into fabricating high efficiency cathode materials for AZIBs and beyond.

Recent Advances on Stretchable Aqueous Zinc-Ion Batteries for Wearable Electronics

The rapid development of wearable electronics has stimulated the pursuit of advanced stretchable power sources. As a promising candidate, stretchable aqueous zinc-ion batteries (AZIBs), have attracted unprecedented attention owing to their intrinsic safety, low cost, environmental benignity, and high performance, and can be endowed with additional functionalities to broaden the applications of wearable electronics. Here, a comprehensive review on the latest advances of stretchable AZIBs is presented. The materials and methods for stretchable components in AZIBs are first summarized, covering current collectors, electrodes, electrolytes/separators, and encapsulating layers. Subsequently, the benefits of the coplanar, fiber-shaped, and sandwiched configurations for stretchable AZIBs are analyzed. Moreover, the additional features integrated into stretchable AZIBs are highlighted. Finally, the challenges and prospects of stretchable AZIBs for wearable applications in the future are proposed.

Electrolyte Optimization Strategy: Enabling Stable and Eco-Friendly Zinc Adaptive Interfacial Layer in Zinc Ion Batteries

Aqueous zinc ion batteries (AZIBs) have emerged as a promising battery technology due to their excellent safety, high capacity, low cost, and eco-friendliness. However, the cycle life of AZIBs is limited by severe side reactions and zinc dendrite growth on the zinc electrode surface, hindering large-scale application. Here, an electrolyte optimization strategy utilizing the simplest dipeptide glycylglycine (Gly-Gly) additive is first proposed. Theoretical calculations and spectral analysis revealed that, due to the strong interaction between the amino group and Zn atoms, Gly-Gly preferentially adsorbs on zinc's surface, constructing a stable and adaptive interfacial layer that inhibits zinc side reactions and dendrite growth. Furthermore, Gly-Gly can regulate zinc ion solvation, leading to a deposition mode shift from dendritic to lamellar and limiting two-dimensional dendrite diffusion. The symmetric cell with the addition of a 20 g/L Gly-Gly additive exhibits a cycle life of up to 1100 h. Under a high current density of 10 mA cm-2, a cycle life of 750 cycles further demonstrates the reliable adaptability of the interfacial layer. This work highlights the potential of Gly-Gly as a promising solution for improving the performance of AZIBs.

Aqueous Zn-Tetrazine Batteries with Cooperative Zn2+/H+ Insertion

We present the investigation of 1,2,4,5-tetrazine derivatives as low-cost and synthetically modular organic electrode materials in rechargeable aqueous Zn-ion batteries (AZIBs). The substituents at the 3,6-positions of tetrazine were found to be critical for cycling stability. While heteroatom substituents (chloro, methoxy, and pyrazole) lead to the rapid decomposition of electrode materials in the electrolyte, the installation of phenyl groups enhances the cycling stability via π-π stacking. Spectroscopic characterization suggests a cooperative Zn2+ and H+ insertion mechanism. This unique cooperativity of Zn2+ and H+ leads to a steady discharge plateau in contrast to the undesirable sloping voltage profile typically observed in Zn-organic batteries.

Engineering improved strategies for spinel cathodes in high-performing zinc-ion batteries

The development of high-performing cathode materials for aqueous zinc-ion batteries (ZIBs) is highly important for the future large-scale energy storage. Owing to the distinctive framework structure, diversity of valences, and high electrochemical activity, spinel materials have been widely investigated and used for aqueous ZIBs. However, the stubborn issues of low electrical conductivity and sluggish kinetics plague their smooth applications in aqueous ZIBs, which stimulates the development of effective strategies to address these issues. This review highlights the recent advances of spinel-based cathode materials that include the configuration of aqueous ZIBs and corresponding reaction mechanisms. Subsequently, the classifications of spinel materials and their properties are also discussed. Then, the review mainly summarizes the effective strategies for elevating their electrochemical performance, including their morphology and structure design, defect engineering, heteroatom doping, and coupling with a conductive support. In the final section, several sound prospects in this fervent field are also proposed for future research and applications.

Operando crystal-amorphous transformation cathode for enhanced zinc storage

Aqueous zinc-ion batteries have obtained broad attention due to their high safety, eco-friendliness, and low cost. However, they are still in the developing stage considering the limited candidate of high-performance cathode materials. Furthermore, the intrinsic storage zinc mechanism is also needed to uncover. Here, we propose an operando crystal-amorphous transformation of tunnel-type VOOH and the obtained amorphous V2O5 serves as a high-performance zinc-ion battery cathode. In-situ X-ray diffraction corroborates the unique operando crystal-amorphous transformation of VOOH during the initial charging process. X-ray photoelectron spectroscopy and transmission electron microscopy further demonstrate the element valence evolution and the lattice structure change, respectively. The operando electrochemical crystal-amorphous transformation allows the obtained amorphous V2O5 to achieve the high capacity of ∼ 350.7 mAh g-1, rate performance (151.2 mAh g-1 at 6.4 A g-1), energy and power densities (137 Wh kg-1 at 6831 W kg-1), unveiling a promising approach of cathode materials via operando crystal-amorphous transformation to achieve the enhanced zinc storage.

Binder-free barium-implanted MnO2 nanosheets on carbon cloth for flexible zinc-ion batteries

The intrinsically low electrical conductivity and poor structural fragility of MnO2 have significantly hampered the zinc storage performance. In this work, Ba2+-implanted δ-MnO2 nanosheets have been hydrothermally grown on a carbon cloth (Ba-MnO2@CC) as an extremely stable and efficient cathode material of aqueous zinc-ion batteries. The three-dimensionally porous architecture composed of interwoven thin MnO2 nanosheets effectively shortens the electron/ion transport distances, enlarges the electrode/electrolyte contact area, and increases the active sites for the electrochemical reaction. Meanwhile, Ba2+ could function as an interlayer pillar to stabilize the crystal structure of MnO2. Consequently, the as-optimized Ba-MnO2@CC exhibits remarkable Zn2+ storage capabilities, such as a high capacity (305 mAh g-1 at 0.2 A g-1), prolonged lifespan (95% retention after a 200-cycling test), and superb rate capability. The binder-free cathode is also applicable for flexible energy storage devices with attractive properties. The present investigation provides important insights into designing advanced cathode materials toward wearable electronics.

Anti-Freezing Electrolytes in Aqueous Multivalent Metal-Ion Batteries: Progress, Challenges, and Optimization Strategies

Aqueous rechargeable multivalent metal-ion batteries (ARMMBs) have attracted considerable attention due to their high capacity, high energy density, and low cost. However, their performance is often limited by low temperature operation, which requires the development of anti-freezing electrolytes. In this review, we summarize the anti-freezing mechanisms and optimization strategies of anti-freezing electrolytes for aqueous batteries (especially for Zn-ion batteries). Besides, we investigate the possible interactions and side reactions between electrolytes and electrodes. We also analyze the problems between electrolytes and electrodes at low temperature, and propose possible solutions. The research progress in the field of low temperature energy storage for aqueous Mg-ion, Ca-ion, and Al-ion batteries, and the challenges faced in their anti-freezing electrolytes are investigated in detail. Last but not least, the outlook on the energy storage applications of ARMMBs is provided to guide the future research.

Multi-Ion Engineering Strategies toward High Performance Aqueous Zinc-Based Batteries

As alternatives to batteries with organic electrolytes, aqueous zinc-based batteries (AZBs) have been intensively studied. However, the sluggish kinetics, side reactions, structural collapse, and dissolution of the cathode severely compromise the commercialization of AZBs. Among various strategies to accelerate their practical applications, multi-ion engineering shows great feasibility to maintain the original structure of the cathode and provide sufficient energy density for high-performance AZBs. Though multi-ion engineering strategies could solve most of the problems encountered by AZBs and show great potential in achieving practical AZBs, the comprehensive summaries of the batteries undergo electrochemical reactions involving more than one charge carrier is still in deficiency. The ambiguous nomenclature and classification are becoming the fountainhead of confusion and chaos. In this circumstance, this review overviews all the battery configurations and the corresponding reaction mechanisms are investigated in the multi-ion engineering of aqueous zinc-based batteries. By combing through all the reported works, this is the first to nomenclate the different configurations according to the reaction mechanisms of the additional ions, laying the foundation for future unified discussions. The performance enhancement, fundamental challenges, and future developing direction of multi-ion strategies are accordingly proposed, aiming to further accelerate the pace to achieve the commercialization of AZBs with high performance.

Molybdenum-optimized electronic structure and micromorphology to boost zinc ions storage properties of vanadium dioxide nanoflowers as an advanced cathode for aqueous zinc-ion batteries

Recently, vanadium dioxide (VO2) has been recognized as one of the most prospective cathodes for aqueous zinc ion batteries (AZIBs) for its high reversible specific capacity; nevertheless, its Zn2+ diffusion kinetics and cycling stability have not yet met expectations. Herein, Mo ions are introduced into VO2 to optimize the intrinsic electronic structure and micromorphology of VO2, achieving significantly enhanced zinc-ion storage. It is found that the substitution of Mo for V narrows the band gap of VO2 and thus enhances the conductivity of the material, while VO2 nanorods are transformed into VO2 nanoflowers which are self-assembled from ultra-thin nanosheets after the introduction of Mo, exposing much more active sites to enhance the migration kinetics of Zn2+. Consequently, the Mo-substituted VO2 (0.5-Mo-VO2) exhibits excellent electrochemical properties, presenting a high initial capacity of 494.5 mAh/g at 0.5 A/g, excellent rate capability of 336 mA h g-1 at 10 A/g and brilliant cycling stability with the capacity retention of 82% over 2000 cycles at 10 A/g. This work provides significant guidance for the design of advanced cathodes for AZIBs by optimizing the electronic structure and tailoring morphology of V-based materials.

Oxygen vacancies in MnOx regulating reaction kinetics for aqueous zinc-ion batteries

MnO2 cathode materials have presented challenges due to their poor conductivity, unstable structure, and sluggish diffusion kinetics for aqueous zinc-ion batteries (AZIBs). In this study, a nanostructured MnOx cathode material was synthesized using an acid etching method, Which introduced abundant Mn(III) sites, resulting in the formation of numerous oxygen vacancies. Comprehensive characterizations revealed that these oxygen vacancies facilitated the reversible adsorption/desorption of Zn2+ ions and promoted efficient electron transfer. In addition, the designed mesoporous structure offered ample active sites and shortened the diffusion path for Zn2+ and H+ ions. Consequently, the nanosized MnOx cathode exhibited enhanced reaction kinetics, achieving a considerable reversible specific capacity of 388.7 mAh/g at 0.1 A/g and superior durability with 72.0% capacity retention over 2000 cycles at 3.0 A/g. The material delivered a maximum energy density of 639.7 Wh kg-1 at 159.94 W kg-1. Furthermore, a systematic analysis of the zinc storage mechanism was performed. This work demonstrates that engineering oxygen vacancies with nanostructure regulation provides valuable insights into optimizing MnO2 cathode materials for AZIBs.

Anchoring Polar Organic Molecules in Defective Ammonium Vanadate for High-Performance Flexible Aqueous Zinc-Ion Battery

Ammonium vanadate (NVO) often has unsatisfactory electrochemical performance due to the irreversible removal of NH4 + during the reaction. Herein, layered DMF-NVO nanoflake arrays (NFAs) grown on highly conductive carbon cloth (CC) are employed as the binder-free cathode (DMF-NVO NFAs/CC), which produces an enlarged interlayer spacing of 12.6 Å (against 9.5 Å for NH4 V4 O10 ) by effective N, N-dimethylformamide (DMF) intercalation. Furthermore, the strong attraction of highly polar carbonyl and ammonium ions in DMF can stabilize the lattice structure, and low-polar alkyl groups can interact with the weak electrostatic generated by Zn2+ , which allows Zn2+ to be freely intercalated. The DMF-NVO NFAs/CC//Zn battery exhibits an impressive high capacity of 536 mAh g-1 at 0.5 A g-1 , excellent rate capability, and cycling performance. The results of density functional theory simulation demonstrate that the intercalation of DMF can significantly reduce the band gap and the diffusion barrier of Zn2+ , and can also accommodate more Zn2+ . The assembled flexible aqueous rechargeable zinc ion batteries (FARZIBs) exhibit outstanding energy density and power density, up to 436 Wh kg-1 at 400 W kg-1 , and still remains 180 Wh kg-1 at 4000 W kg-1 . This work can provide a reference for the design of cathode materials for high-performance FARZIBs.

Rationally Designed ZnTe@C Nanowires with Superior Zinc Storage Performance for Aqueous Zn Batteries

Te-based materials with excellent electrical conductivity and ultra-high volume specific capacity have attracted much attention for the cost-efficient aqueous Zn batteries. However, the construction of functional structures with mild volume expansion and suppressed shuttle effects, enabling an expanded lifespan, is still a challenge for conversion-type materials. Herein, the carbon-coated zinc telluride nanowires (ZnTe@C NWs) are rationally designed as a high-performance cathode material for aqueous Zn batteries. The carbon-coated1D nanostructure could not only provide optimized transmission path for electrons and ions, but also help to maintain structure integrity upon volume variation and suppress intermediates dissolution, endowing the ZnTe@C NWs with improved cycling stability and reaction kinetics. Consequently, a reversible six-electron reaction mechanism of ZnTe@C NWs based on Te2- /Te4+ conversion with excellent output capacity (586 mAh g-1 at 0.1 A g-1 ) and lifespan (>250 mAh g-1 retained for 400 cycles at 1 A g-1 ) is eventually achieved.

High Entropy Oxides Modulate Atomic-Level Interactions for High-Performance Aqueous Zinc-Ion Batteries

The strong electrostatic interaction between high-charge-density zinc ions (112 C mm-3 ) and the fixed crystallinity of traditional oxide cathodes with delayed charge compensation hinders the development of high-performance aqueous zinc-ion batteries (AZIBs). Herein, to intrinsically promote electron transfer efficiency and improve lattice tolerance, a revolutionary family of high-entropy oxides (HEOs) materials with multipath electron transfer and remarkable structural stability as cathodes for AZIBs is proposed. Benefiting from the unique "cock-tail" effect, the interaction of diverse type metal-atoms in HEOs achieves essentially broadened d-band and lower degeneracy than monometallic oxides, which contribute to convenient electron transfer and one of the best rate-performances (136.2 mAh g-1 at 10.0 A g-1 ) in AZIBs. In addition, the intense lattice strain field of HEOs is highly tolerant to the electrostatic repulsion of high-charge-density Zn2+ , leading to the outstanding cycling stability in AZIBs. Moreover, the super selectability of elements in HEOs exhibits significant potential for AZIBs.

An Electrochemical Perspective of Aqueous Zinc Metal Anode

Based on the attributes of nonflammability, environmental benignity, and cost-effectiveness of aqueous electrolytes, as well as the favorable compatibility of zinc metal with them, aqueous zinc ions batteries (AZIBs) become the leading energy storage candidate to meet the requirements of safety and low cost. Yet, aqueous electrolytes, acting as a double-edged sword, also play a negative role by directly or indirectly causing various parasitic reactions at the zinc anode side. These reactions include hydrogen evolution reaction, passivation, and dendrites, resulting in poor Coulombic efficiency and short lifespan of AZIBs. A comprehensive review of aqueous electrolytes chemistry, zinc chemistry, mechanism and chemistry of parasitic reactions, and their relationship is lacking. Moreover, the understanding of strategies for suppressing parasitic reactions from an electrochemical perspective is not profound enough. In this review, firstly, the chemistry of electrolytes, zinc anodes, and parasitic reactions and their relationship in AZIBs are deeply disclosed. Subsequently, the strategies for suppressing parasitic reactions from the perspective of enhancing the inherent thermodynamic stability of electrolytes and anodes, and lowering the dynamics of parasitic reactions at Zn/electrolyte interfaces are reviewed. Lastly, the perspectives on the future development direction of aqueous electrolytes, zinc anodes, and Zn/electrolyte interfaces are presented.

Ferroelectric-Enhanced cathode kinetics toward High-Performance aqueous Zinc-Ion batteries

Rechargeable aqueous zinc ion batteries (AZIBs) offer promising potential for large-scale energy storage systems due to their high affordability and safety. However, their practical applications are hindered by the undesired rate capability and cycling stability of the used cathode, attributed to sluggish ions kinetics during charge-discharge process. Herein, we propose an electric field balancing strategy to regulate the electrolyte ions behavior by constructing a ferroelectric interface on the cathode surface using a prototypical of MnO2-based cathode. An appropriate thickness coating of ferroelectric materials coating (i.e., β-PVDF) on the MnO2 surface is theoretically and experimentally demonstrated to enhance the ion kinetics due to the optimized electrical distribution during electrochemical operations. Further comprehensive electrochemical mechanism studies reveal that the ferroelectric interface on the MnO2@β-PVDF not only promotes the diffusion of Zn2+ but also reduces the electrochemical overpotential (17.6 mV), resulting in improved electrochemical reversibility and capacity performance. The resultant MnO2@β-PVDF cathode exhibits the highest capacity of 277.6 mAh g-1 (at 0.1 A g-1) and capacity retention of 68.6% after 120 cycles, surpassing both the pristine MnO2 and non-ferroelectric materials coated MnO2 electrodes. This success presents a new approach to enhance the overall electrochemical performance of the cathodes for the practical application of AZIBs.