Formation of Hexagonal-Close Packed (HCP) Rhodium as a Size Effect

Strain Engineering of Unconventional Crystal-Phase Noble Metal Nanocatalysts

The crystal phase, alongside the composition, morphology, architecture, facet, size, and dimensionality, has been recognized as a critical factor influencing the properties of noble metal nanomaterials in various applications. In particular, unconventional crystal phases can potentially enable fascinating properties in noble metal nanomaterials. Recent years have witnessed notable advances in the phase engineering of nanomaterials (PEN). Within the accessible strategies for phase engineering, the effect of strain cannot be ignored because strain can act not only as the driving force of phase transition but also as the origin of the diverse physicochemical properties of the unconventional crystal phase. In this review, we highlight the development of unconventional crystal-phase noble metal nanomaterials within strain engineering. We begin with a short introduction of the unconventional crystal phase and strain effect in noble metal nanomaterials. Next, the correlations of the structure and performance of strain-engineered unconventional crystal-phase noble metal nanomaterials in electrocatalysis are highlighted, as well as the phase transitions of noble metal nanomaterials induced by the strain effect. Lastly, the challenges and opportunities within this rapidly developing field (i.e., the strain engineering of unconventional crystal-phase noble metal nanocatalysts) are discussed.

The Phase Control of Transition Metallic Elements via Facile Chemical and Physical Syntheses

The crystal phases of metals are important factors to tune the properties of metals, and therefore received extensive attention. Traditionally, phase control is performed within limited numbers of elements by harsh conditions, such as face-centered cubic Fe by high temperature. This review summarizes most reports in metal phase control area, including elements of Fe, Co, Ni, Cu, Ru, Pd, Rh, Os and Au. For every metallic element, the facile phase control methods are systematically introduced, such as epitaxial growth, ball milling, chemical reduction, etc. Their corresponding applications and the mechanisms for phase control are thoroughly discussed.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials

Solid-state phase transformation is an intriguing phenomenon in crystalline or noncrystalline solids due to the distinct physical and chemical properties that can be obtained and modified by phase engineering. Compared to bulk solids, nanomaterials exhibit enhanced capability for phase engineering due to their small sizes and high surface-to-volume ratios, facilitating various emerging applications. To establish a comprehensive atomistic understanding of phase engineering, in situ transmission electron microscopy (TEM) techniques have emerged as powerful tools, providing unprecedented atomic-resolution imaging, multiple characterization and stimulation mechanisms, and real-time integrations with various external fields. In this Review, we present a comprehensive overview of recent advances in in situ TEM studies to characterize and modulate nanomaterials for phase transformations under different stimuli, including mechanical, thermal, electrical, environmental, optical, and magnetic factors. We briefly introduce crystalline structures and polymorphism and then summarize phase stability and phase transformation models. The advanced experimental setups of in situ techniques are outlined and the advantages of in situ TEM phase engineering are highlighted, as demonstrated via several representative examples. Besides, the distinctive properties that can be obtained from in situ phase engineering are presented. Finally, current challenges and future research opportunities, along with their potential applications, are suggested.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Coherent hexagonal platinum skin on nickel nanocrystals for enhanced hydrogen evolution activity

Metastable noble metal nanocrystals may exhibit distinctive catalytic properties to address the sluggish kinetics of many important processes, including the hydrogen evolution reaction under alkaline conditions for water-electrolysis hydrogen production. However, the exploration of metastable noble metal nanocrystals is still in its infancy and suffers from a lack of sufficient synthesis and electronic engineering strategies to fully stimulate their potential in catalysis. In this paper, we report a synthesis of metastable hexagonal Pt nanostructures by coherent growth on 3d transition metal nanocrystals such as Ni without involving galvanic replacement reaction, which expands the frontier of the phase-replication synthesis. Unlike noble metal substrates, the 3d transition metal substrate owns more crystal phases and lower cost and endows the hexagonal Pt skin with substantial compressive strains and programmable charge density, making the electronic properties particularly preferred for the alkaline hydrogen evolution reaction. The energy barriers are greatly reduced, pushing the activity to 133 mA cm_geo^-2 and 17.4 mA μg_Pt^-1 at -70 mV with 1.5 µg of Pt in 1 M KOH. Our strategy paves the way for metastable noble metal catalysts with tailored electronic properties for highly efficient and cost-effective energy conversion.

Methane plasma-mediated phase engineering of Ni nanosheets for alkaline hydrogen evolution

Engineering of the crystal structures of metallic nanomaterials is an alternative avenue to control the size and shape of nanocatalysts. However, the phase-controlled synthesis of Ni nanocatalysts is challenging because of its low reduction potential under mild conditions. We developed a room-temperature CH₄ plasma conversion of Ni(OH)₂ nanosheets to hexagonal close packed (hcp) Ni while maintaining a pristine shape. Increasing the temperature resulted in the formation of face-centered cubic (fcc) Ni. The hcp Ni nanosheets exhibited an overpotential of 85 mV at 10 mA cm^-2 for an electrocatalytic hydrogen evolution reaction (HER) in alkaline solution, which was superior to that of the fcc (122 mV) counterpart. Density-functional-theory calculations demonstrated that during the HER, the d-band center of hcp Ni was closer to the Fermi level, which aided the formation of H₂ molecules. This work could facilitate the synthesis of other metastable metals and metallic alloys with high efficiency for various applications.

Insight into the effects of the crystal phase of Ru over ultrathin Ru@Pt core-shell nanosheets for methanol electrooxidation

Coating a second metal on the surface of ultrathin 2D nanosheets (NSs) could induce lattice strain and modify the electronic structure, thereby changing the surface reactivity. Herein, we report the effects of different crystal phases of Ru on the electrocatalytic performance of ultrathin Ru@Pt core-shell NSs for the methanol oxidation reaction (MOR). Importantly, Ru with a novel face-centered-cubic phase was found to have more effect on the electronic structure of Pt than Ru with a conventional hexagonal close-packed phase, thereby leading to improved electrocatalytic activity toward the MOR under acidic and basic conditions. It is believed that the strategy presented here would offer a new approach to the construction of bimetallic core-shell nanostructures with various promising applications.

Revealing Surface Restraint-Induced Hexagonal Pd Nanocrystals via In Situ Transmission Electron Microscopy

Achieving metal nanocrystals with metastable phase draws much attention due to their anticipated fascinating properties, wheras it is still challenging because their polymorphism nature and phase transition mechanism remain elusive. Here, phase stability of face-centered cubic (fcc) Pd nanocrystals was studied via in situ spherical aberration (Cs)-corrected transmission electron microscopy (TEM). By constructing a well-defined Pd/C composite structure, Pd nanocrystals encapsulated by graphite, the dispersion process of fcc Pd was observed through a nucleation and growth process. Interestingly, Cs-corrected scanning TEM analysis demonstrated that the newly formed Pd nanocrystals could adopt a metastable hexagonal phase, which was considered challenging to obtain. Accordingly, formation mechanism of the hexagonal Pd nanocrystals was proposed, which involved the combined effect of two factors: (1) templating of graphite and (2) size effect. This work is expected to offer new insight into the polymorphism of Pd nanocrystals and pave the way for the future design of metastable metal nanomaterials.

Anomalously Isotropic Electron Transport and Weak Electron-Phonon Interactions in Hexagonal Noble Metals

The electrical transport properties of typical hexagonal metals are anisotropic because of their anisotropic lattice structures. Unexpectedly, we show that the electron transport properties in hexagonal close-packed (hcp) noble metals are almost isotropic. Although the electron transport properties of an individual electronic band are highly anisotropic, the total contributions are almost equal in different crystalline orientations because of the complementary contributions of different bands. The electron transport is severely limited by phonons for metals with multisheet Fermi surfaces and optical phonon polarizations. However, it is found the electron-phonon interactions are weak in hcp noble metals, although their Fermi surfaces and phonon spectra are complicated. The electronic structure acts as a phonon filter, resulting in small electron-phonon scattering rates. The weak electron-phonon interactions are beneficial to electron and thermal transport, indicating hcp noble metals have great potential to be used in electronics and solar cells.

Phase-Controlled Synthesis of Ru Nanocrystals via Template-Directed Growth: Surface Energy versus Bulk Energy

Despite the successful control of crystal phase using template-directed growth, much remains unknown about the underlying mechanisms. Here, we demonstrate that the crystal phase taken by the deposited metal depends on the lateral size of face-centered cubic (fcc)-Pd nanoplate templates with 12 nm plates giving fcc-Ru while 18-26 nm plates result in hexagonal closed-packed (hcp)-Ru. Although Ru overlayers with a metastable fcc- (high in bulk energy) or stable hcp-phase (low in bulk energy) can be epitaxially deposited on the basal planes, the lattice mismatch will lead to jagged hcp- (high in surface energy) and smooth fcc-facets (low in surface energy), respectively, on the side faces. As the proportion of basal and side faces on the nanoplates varies with lateral size, the crystal phase will change depending on the relative contributions from the surface and bulk energies. The Pd@fcc-Ru outperforms the Pd@hcp-Ru nanoplates toward ethylene glycol and glycerol oxidation reactions.

Formation and selected catalytic properties of ruthenium, rhodium, osmium and iridium nanoparticles

The synthesis and applications in catalysis of nanoparticles formed from ruthenium, rhodium, osmium and iridium have been reviewed.

Facile Synthesis of Palladium-Based Nanocrystals with Different Crystal Phases and a Comparison of Their Catalytic Properties

A relatively unexplored aspect of noble-metal nanomaterials is polymorphism, or their ability to crystallize in different crystal phases. Here, a method is reported for the facile synthesis of Ru@Pd core-shell nanocrystals featuring polymorphism, with the core made of hexagonally close-packed (hcp)-Ru while the Pd shell takes either an hcp or face-centered cubic (fcc) phase. The polymorphism shows a dependence on the shell thickness, with shells thinner than ≈1.4 nm taking the hcp phase whereas the thicker ones revert to fcc. The injection rate provides an experimental knob for controlling the phase, with one-shot and drop-wise injection of the Pd precursor corresponding to fcc-Pd and hcp-Pd shells, respectively. When these nanocrystals are tested as catalysts toward formic acid oxidation, the Ru@Pd_hcp nanocrystals outperform Ru@Pd_fcc in terms of both specific activity and peak potential. Density functional theory calculations are also performed to elucidate the origin of this performance enhancement.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Phase Control of Noble Monometallic and Alloy Nanomaterials by Chemical Reduction Methods

In recent years, the phase control of monometallic and alloy nanomaterials has attracted great attention because of the potential to tune the physical and chemical properties of these species. In this Review, an overview of the latest research progress in phase-controlled monometallic and alloy nanomaterials is first given. Then, the phase-controlled synthesis using a chemical reduction method are discussed, and the formation mechanisms of these nanomaterials are specifically highlighted. Lastly, the challenges and future perspectives in this new research field are discussed.

Selective Epitaxial Growth of Rh Nanorods on 2H/fcc Heterophase Au Nanosheets to Form 1D/2D Rh-Au Heterostructures for Highly Efficient Hydrogen Evolution

Phase engineering of nanomaterials (PEN) enables the preparation of metal nanomaterials with unconventional phases that are different from their thermodynamically stable counterparts. These unconventional-phase nanomaterials can serve as templates to construct precisely controlled metallic heterostructures for wide applications. Nevertheless, how the unconventional phase of templates affects the nucleation and growth of secondary metals still requires systematic explorations. Here, two-dimensional (2D) square-like Au nanosheets with an unconventional 2H/face-centered cubic (fcc) heterophase, composing of two pairs of opposite edges with 2H/fcc heterophase and fcc phase, respectively, and two 2H/fcc heterophase basal planes, are prepared and then used as templates to grow one-dimensional (1D) Rh nanorods. The effect of different phases in different regions of the Au templates on the overgrowth of Rh nanorods has been systematically investigated. By tuning the reaction conditions, three types of 1D/2D Rh-Au heterostructures are prepared. In the type A heterostructure, Rh nanorods only grow on the fcc defects including stacking faults and/or twin boundaries (denoted as fcc-SF/T) and 2H phases in two 2H/fcc edges of the Au nanosheet. In the type B heterostructure, Rh nanorods grow on the fcc-SF/T and 2H phases in two 2H/fcc edges and two 2H/fcc basal planes of the Au nanosheet. In the type C heterostructure, Rh nanorods grow on four edges and two basal planes of the Au nanosheet. Furthermore, the type C heterostructure shows promising performance toward the electrochemical hydrogen evolution reaction (HER) in acidic media, which is among the best reported Rh-based and other noble-metal-based HER electrocatalysts.

Evoking ordered vacancies in metallic nanostructures toward a vacated Barlow packing for high-performance hydrogen evolution

Metallic nanostructures are commonly densely packed into a few packing variants with slightly different atomic packing factors. The structural aspects and physicochemical properties related with the vacancies in such nanostructures are rarely explored because of lack of an effective way to control the introduction of vacancy sites. Highly voided metallic nanostructures with ordered vacancies are however energetically high lying and very difficult to synthesize. Here, we report a chemical method for synthesis of hierarchical Rh nanostructures (Rh NSs) composed of ultrathin nanosheets, composed of hexagonal close-packed structure embedded with nanodomains that adopt a vacated Barlow packing with ordered vacancies. The obtained Rh NSs exhibit remarkably enhanced electrocatalytic activity and stability toward the hydrogen evolution reaction (HER) in alkaline media. Theoretical calculations reveal that the exceptional electrocatalytic performance of Rh NSs originates from their unique vacancy structures, which facilitate the adsorption and dissociation of H2O in the HER.

Ion irradiation induced phase transformation in gold nanocrystalline films

Gold is a noble metal typically stable as a solid in a face-centered cubic (FCC) structure under ambient conditions; however, under particular circumstances aberrant allotropes have been synthesized. In this work, we document the phase transformation of 25 nm thick nanocrystalline (NC) free-standing gold thin-film via in situ ion irradiation studied using atomic-resolution transmission electron microscopy (TEM). Utilizing precession electron diffraction (PED) techniques, crystallographic orientation and the radiation-induced relative strains were measured and furthermore used to determine that a combination of surface and radiation-induced strains lead to an FCC to hexagonal close packed (HCP) crystallographic phase transformation upon a 10 dpa radiation dose of Au⁴⁺ ions. Contrary to previous studies, HCP phase in nanostructures of gold was stabilized and did not transform back to FCC due to a combination of size effects and defects imparted by damage cascades.

Unraveling the Spatial Distribution of Catalytic Non-Cubic Au Phases in a Bipyramidal Microcrystallite by X-ray Diffraction Microscopy

Tuning of crystal structures and shapes of submicrometer-sized noble metals have revealed fascinating catalytic, optical, electrical, and magnetic properties that enable developments of environmentally friendly and durable nanotechnological applications. Several attempts have been made to stabilize Au, knowing its extraordinary stability in its conventional face-centered cubic (fcc) lattice, into different lattices, particularly to develop Au-based catalysis for industry. Here, we report the results from scanning X-ray diffraction microscopy (SXDM) measurements on an ambient-stable penta-twinned bipyramidal Au microcrystallite (about 1.36 μm in length and 230 nm in diameter) stabilized in noncubic lattice, exhibiting catalytic properties. With more than 82% of the crystal volume, the majority crystallite structure is identified as body-centered orthorhombic (bco), while the remainder is the standard fcc. A careful analysis of the diffraction maps reveals that the tips are made up of fcc, while the body contains mainly bco with very high strain. The reported structural imaging technique of representative single crystallite will be useful to investigate the growth mechanism of similar multiphase nano- and micrometer-sized crystals.

Facilitating Gold Redox Catalysis with Electrochemistry: An Efficient Chemical-Oxidant-Free Approach

Due to the high oxidation potential between AuI and AuIII , gold redox catalysis requires at least stoichiometric amounts of a strong oxidant. We herein report the first example of an electrochemical approach in promoting gold-catalyzed oxidative coupling of terminal alkynes. Oxidation of AuI to AuIII was successfully achieved through anode oxidation, which enabled facile access to either symmetrical or unsymmetrical conjugated diynes through homo-coupling or cross-coupling. This report extends the reaction scope of this transformation to substrates that are not compatible with strong chemical oxidants and potentiates the versatility of gold redox chemistry through the utilization of electrochemical oxidative conditions.

Size-Dependent Phase Transformation of Noble Metal Nanomaterials

As an important aspect of crystal phase engineering, controlled crystal phase transformation of noble metal nanomaterials has emerged as an effective strategy to explore novel crystal phases of nanomaterials. In particular, it is of significant importance to observe the transformation pathway and reveal the transformation mechanism in situ. Here, the phase transformation behavior of face-centered cubic (fcc) Au nanoparticles (fcc-AuNPs), adhering to the surface of 4H nanodomains in 4H/fcc Au nanorods, referred to as 4H-AuNDs, during in situ transmission electron microscopy imaging is systematically studied. It is found that the phase transformation is dependent on the ratio of the size of the monocrystalline nanoparticle (NP) to the diameter of 4H-AuND. Furthermore, molecular dynamics simulation and theoretical modeling are used to explain the experimental results, giving a size-dependent phase transformation diagram which provides a general guidance to predict the phase transformation pathway between fcc and 4H Au nanomaterials. Impressively, this method is general, which is used to study the phase transformation of other metal NPs, such as Pd, Ag, and PtPdAg, adhering to 4H-AuNDs. The work opens an avenue for selective phase engineering of nanomaterials which may possess unique physicochemical properties and promising applications.

Crystal phase effect upon O2 activation on gold surfaces through intrinsic strain

Crystal phase engineering is a promising strategy to tune the catalytic performance of metal nanomaterials. Generally, the crystal phase effect on catalysis is ascribed to distinct surface atomic arrangements of catalysts with different crystal phases. Here we show that even for similar surfaces, such as the close-packed surfaces, different crystal phases have considerably different surface reactivities due to their distinct intrinsic surface strains. Using first-principles calculations, we find that the close-packed surfaces of hexagonal close-packed (HCP) and double HCP (4H) gold have significantly smaller intrinsic strains (∼1.3%) than those of face-centered cubic (FCC) gold (∼2.3%). These distinct intrinsic surface strains result in various oxygen adsorption energies and O2 dissociation barriers on these close-packed gold surfaces, and the dissociation of O2 on different crystal phases and surfaces follows the Brønsted-Evans-Polanyi principle.

Intrinsic catalytic activity of rhodium nanoparticles with respect to reactive oxygen species scavenging: implication for diminishing cytotoxicity

Noble metal nanoparticles (NPs) and their hybrids have demonstrated a strong potential to mimic the catalytic activity of natural enzymes and diminish oxidative stress. There is a large space to explore the intrinsic catalytic activity of Rh NPs with respect to reactive oxygen species (ROS) scavenging. We found that Rh NPs can quench H₂O₂, ^•OH, O₂^•-, ¹O₂ and inhibit lipid peroxidation under physiological conditions. In vitro cell experiments proved that Rh NPs have great biocompatibility and protect cells from oxidative damage caused by H₂O₂. This study can provide important insights that could inform future biological applications.

Size and shape dependency of the surface energy of metallic nanoparticles: unifying the atomic and thermodynamic approaches

Surface energy is a fundamental property of metallic nanoparticles (MeNPs), which plays a crucial role in nucleation and growth and has strong implications for the application and environmental impact of MeNPs. Surface energy (J m-2) can be size dependent, but experimental data on surface energy trends for MeNPs are inconclusive. Computational chemistry may resolve the issue, but the location and area of the surface used for scaling, which dramatically influences the outcome and interpretation, has not been properly investigated. The size dependency of the surface energy can only be determined by scaling to the thermodynamic surface of tension. To identify this, we have derived a generalized Tolman approach for non-spherical particles, which is used to analyze the thermodynamic consistency of various surface definitions. Only the physical surface, defined here, is consistent with the surface of tension. Scaling of recent computational data for faceted MeNPs to this surface yields a low size dependency of surface energy, in good agreement with the Tolman lengths corresponding to its interfacial position. We find Tolman lengths of -0.03 nm for icosahedra and -0.04 nm for cuboctahedra of gold or silver. With this result, our approach can be used to quantify the twinning energy for icosahedral nanoparticles, being ∼0.06 J per m2 twin area. To understand the unorthodox negative Tolman lengths, we have analyzed the surface energetics of the solid-gas interface of metals in relation to the liquid-vapor interface of water. Surface entropy is found to be imperative in determining the size dependence of surface free energy. At room temperature, the influence of surface entropy on surface enthalpy is much smaller for metals than for water. It explains why these two interfaces have opposite size dependencies of the surface Gibbs free energy and opposite signs of the Tolman length. For water, forming nanodroplets or nanobubbles, the Tolman length is negative (∼-0.014 nm) for the surface enthalpy, but positive (∼+0.06 ± 0.02 nm) for the surface Gibbs free energy. For MeNPs at room temperature, both entities are negative, but at high temperature, the increased surface entropy term may cause the size dependency of surface Gibbs free energy to become reversed.

Syntheses and Properties of Metal Nanomaterials with Novel Crystal Phases

In recent decades, researchers have devoted tremendous effort into the rational design and controlled synthesis of metal nanomaterials with well-defined size, morphology, composition, and structure, and great achievements have been reached. However, the crystal-phase engineering of metal nanomaterials still remains a big challenge. Recent research has revealed that the crystal phase of metal nanomaterials can significantly alter their properties, arising from the distinct atomic arrangement and modified electronic structure. Until now, it has been relatively uncommon to synthesize metal nanomaterials with novel crystal phases in spite of the fact that these nanostructures would be promising for various applications. Here, the research progress regarding the fine control of noble metal (Au, Ag, Ru, Rh, Pd) and non-noble metal (Fe, Co, Ni) nanomaterials with novel crystal phases is reviewed. First, synthesis strategies and their phase transformations are summarized, while highlighting the peculiar characteristics of each element. The phase-dependent properties are then discussed by providing representative examples. Finally, the challenges and perspectives in this emerging field are proposed.

Insights into structure and dynamics of (Mn,Fe)Ox-promoted Rh nanoparticles

The mutual interaction between Rh nanoparticles and manganese/iron oxide promoters in silica-supported Rh catalysts for the hydrogenation of CO to higher alcohols was analyzed by applying a combination of spectroscopy and microscopy.