Colloidal Synthesis of Bipolar Off-Stoichiometric Gallium Iron Oxide Spinel-Type Nanocrystals with Near-IR Plasmon Resonance

Optical, Dielectric, Magnetic, Photocatalytic, and Antibacterial Properties of Ga-Doped BiGaxFe1-xO3 Synthesized by the Microemulsion Approach

The effect of Ga-substitution on bismuth ferrite BiGaxFe1-xO3 (x = 0, 0.05, 0.10, 0.15, 0.20, and 0.25) properties was investigated, which was fabricated using a microemulsion route. X-ray diffraction analysis confirmed that specimens had a single-phase rhombohedral structure with space group R3̅c. The concentration of Ga had an impact on various properties such as structural parameters, crystalline size, porosity, and unit cell volume. The samples exhibited notable values for the dielectric constant, tangent loss, and dielectric loss in the low-frequency range, which declined as the frequency increased due to different polarizations. The increment in the AC conductivity was associated with rise in frequency. The P-E loops demonstrated that the samples became more resistive as the Ga concentration increased. The retentivity (Mr) and saturation magnetization (Ms) values reduced as the Ga content increased, although all samples had Hc values within the range for electromagnetic materials. The Ga-substitution had a synergistic effect on the electrochemical characteristics of BiGaxFe1-xO3, resulting in greater conductivity than that of undoped BiFeO3. These enhanced properties contributed to their higher photocatalytic activity in the degradation of crystal violet under visible light irradiation. The doped BiGaxFe1-xO3 exhibited 79% dye degradation after 90 min of illumination compared to 54% for pure BiFeO3. Recycling experiments confirmed the stability and reusability of the synthesized nanoparticles. The antibacterial activity of the samples was certified against various microbes, and the doped BiGaxFe1-xO3 showed promising activity. Thus, doped materials are good candidates for memories, dielectric resonators, and photovoltaics because of their high dielectric constant and AC conductivity, while their higher photocatalytic activity under visible light makes them promising photocatalysts for removing noxious and harmful effluents from wastewaters.

Light-Driven Nitrogen Fixation to Ammonia over Aqueous-Dispersed Mo-Doped TiO2 Colloidal Nanocrystals

Photocatalytic nitrogen fixation to ammonia and nitrates holds great promise as a sustainable route powered by solar energy and fed with renewable energy resources (N2 and H2O). This technology is currently under deep investigation to overcome the limited efficiency of the process. The rational design of efficient and robust photocatalysts is crucial to boost the photocatalytic performance. Widely used bulk materials generally suffer from charge recombination due to poor interfacial charge transfer and difficult surface diffusion. To overcome this limitation, this work explores the use of aqueous-dispersed colloidal semiconductor nanocrystals (NCs) with precise morphological control, better carrier mobility, and stronger redox ability. Here, the TiO2 framework has been modified via aliovalent molybdenum doping, and resulting Mo-TiO2 NCs have been functionalized with charged terminating hydroxyl groups (OH-) for the simultaneous production of ammonia, nitrites, and nitrates via photocatalytic nitrogen reduction in water, which has not been previously found in the literature. Our results demonstrate the positive effect of Mo-doping and nanostructuration on the overall N2 fixation performance. Ammonia production rates are found to be dependent on the Mo-doping loading. 5Mo-TiO2 delivers the highest NH4+ yield rate (ca. 105.3 μmol g-1 L-1 h-1) with an outstanding 90% selectivity, which is almost four times higher than that obtained over bare TiO2. The wide range of advance characterization techniques used in this work reveals that Mo-doping enhances charge-transfer processes and carriers lifetime as a consequence of the creation of new intra band gap states in Mo-doped TiO2 NCs.

Photoactive p-Type Spinel CuGa2O4 Nanocrystals

Herein we report the synthesis and characterization of spinel copper gallate (CuGa₂O₄) nanocrystals (NCs) with an average size of 3.7 nm via a heat-up colloidal reaction. CuGa₂O₄ NCs have a band gap of ∼2.5 eV and marked p-type character, in agreement with ab initio simulations. These novel NCs are demonstrated to be photoactive, generating a clear and reproducible photocurrent under blue light irradiation when deposited as thin films. Crucially, the ability to adjust the Cu/Ga ratio within the NCs, and the effect of this on the optical and electronic properties of the NCs, was also demonstrated. These results position CuGa₂O₄ NCs as a novel material for optoelectronic applications, including hole transport and light harvesting.

Synthesis of Iron Gallate (FeGa2O4) Nanoparticles by Mechanochemical Method

The study was focused on optimizing the procedure of synthesizing iron gallate (FeGa2O4) nanoparticles by mechanochemical techniques. Due to a lack of information in the literature about the sequence of synthesis procedures of FeGa2O4 structures, the study is based on the establishment of a recipe for FeGa2O4 synthesis using mechanochemical techniques. Rotation speed, grinding media, and milling durations were the optimized parameters. At the end of each step, the structure of the resulting samples was investigated using the X-ray diffraction (XRD) patterns of samples. At the end of the processes, the XRD patterns of the samples milled under an air atmosphere were coherent with the XRD pattern of the FeGa2O4 structure. XRD patterns were analyzed employing Rietveld refinements to determine lattice parameters under the assumption of an inverse spinel crystal formation. Furthermore, a fluctuation at band gap values in the range of 2.39 to 2.55 eV was realized and associated with the excess Fe atoms in the lattice, which settled as defects in the crystal structures.

Strong Purcell enhancement at telecom wavelengths afforded by spinel Fe3O4 nanocrystals with size-tunable plasmonic properties

Developments in the field of nanoplasmonics have the potential to advance applications from information processing and telecommunications to light-based sensing. Traditionally, nanoscale noble metals such as gold and silver have been used to achieve the targeted enhancements in light-matter interactions that result from the presence of localized surface plasmons (LSPs). However, interest has recently shifted to intrinsically doped semiconductor nanocrystals (NCs) for their ability to display LSP resonances (LSPRs) over a much broader spectral range, including the infrared (IR). Among semiconducting plasmonic NCs, spinel metal oxides (sp-MOs) are an emerging class of materials with distinct advantages in accessing the telecommunications bands in the IR and affording useful environmental stability. Here, we report the plasmonic properties of Fe₃O₄ sp-MO NCs, known previously only for their magnetic functionality, and demonstrate their ability to modify the light-emission properties of telecom-emitting quantum dots (QDs). We establish the synthetic conditions for tuning sp-MO NC size, composition and doping characteristics, resulting in unprecedented tunability of electronic behavior and plasmonic response over 450 nm. In particular, with diameter-dependent variations in free-electron concentration across the Fe₃O₄ NC series, we introduce a strong NC size dependency onto the optical response. In addition, our observation of plasmonics-enhanced decay rates from telecom-emitting QDs reveals Purcell enhancement factors for simple plasmonic-spacer-emitter sandwich structures up to 51-fold, which are comparable to values achieved previously only for emitters in the visible range coupled with conventional noble metal NCs.

Plasmonic Photoelectrochemistry: In View of Hot Carriers

Utilizing plasmon-generated hot carriers to drive chemical reactions has emerged as a popular topic in solar photocatalysis. However, a complete description of the underlying mechanism of hot-carrier transfer in photochemical processes remains elusive, particularly for those involving hot holes. Photoelectrochemistry enables to localize hot holes on photoanodes and hot electrons on photocathodes and thus offers an approach to separately explore the hole-transfer dynamics and electron-transfer dynamics. This review summarizes a comprehensive understanding of both hot-hole and hot-electron transfers from photoelectrochemical studies on plasmonic electrodes. Additionally, working principles and applications of spectroelectrochemistry are discussed for plasmonic materials. It is concluded that photoelectrochemistry provides a powerful toolbox to gain mechanistic insights into plasmonic photocatalysis.

Study of structural, elastic, electronic, and vibrational properties of MRh2O4 (M = Cd and Zn) spinels: DFT-based calculations

Solar-assisted water splitting using photoelectrochemical cells (PECs) is one of the promising ways for the production of hydrogen to store renewable energy. Semiconducting materials are used as a key factor which controls the overall energy conversion efficiency in PECs. However, finding new semiconductors with appropriate properties (stability, efficient charge separation and transport, abundant and visible light absorption) is still a challenge for developing new materials for solar water splitting. Spinel-type structures which have suitable band gaps for visible light harvesting are promising candidates for PEC applications. In this study, first principles method within density functional theory (DFT) have been used to study the structural, elastic, electronic, and vibrational properties of MRh₂O₄ (M = Cd and Zn) for cubic spinel phase. Present study reveals that the CdRh₂O₄ and ZnRh₂O₄ in spinel structure are semiconducting in nature and they also satisfy the stability criterion. Thus, studied spinels can be used as semiconductors in PEC applications.

Fluorine-Doped Tin Oxide Colloidal Nanocrystals

Fluorine-doped tin oxide (FTO) is one of the most studied and established materials for transparent electrode applications. However, the syntheses for FTO nanocrystals are currently very limited, especially for stable and well-dispersed colloids. Here, we present the synthesis and detailed characterization of FTO nanocrystals using a colloidal heat-up reaction. High-quality SnO₂ quantum dots are synthesized with a tuneable fluorine amount up to ~10% atomic, and their structural, morphological and optical properties are fully characterized. These colloids show composition-dependent optical properties, including the rise of a dopant-induced surface plasmon resonance in the near infrared.

Localized Surface Plasmon Resonance in Semiconductor Nanocrystals

Localized surface plasmon resonance (LSPR) in semiconductor nanocrystals (NCs) that results in resonant absorption, scattering, and near field enhancement around the NC can be tuned across a wide optical spectral range from visible to far-infrared by synthetically varying doping level, and post synthetically via chemical oxidation and reduction, photochemical control, and electrochemical control. In this review, we will discuss the fundamental electromagnetic dynamics governing light matter interaction in plasmonic semiconductor NCs and the realization of various distinctive physical properties made possible by the advancement of colloidal synthesis routes to such NCs. Here, we will illustrate how free carrier dielectric properties are induced in various semiconductor materials including metal oxides, metal chalcogenides, metal nitrides, silicon, and other materials. We will highlight the applicability and limitations of the Drude model as applied to semiconductors considering the complex band structures and crystal structures that predominate and quantum effects that emerge at nonclassical sizes. We will also emphasize the impact of dopant hybridization with bands of the host lattice as well as the interplay of shape and crystal structure in determining the LSPR characteristics of semiconductor NCs. To illustrate the discussion regarding both physical and synthetic aspects of LSPR-active NCs, we will focus on metal oxides with substantial consideration also of copper chalcogenide NCs, with select examples drawn from the literature on other doped semiconductor materials. Furthermore, we will discuss the promise that LSPR in doped semiconductor NCs holds for a wide range of applications such as infrared spectroscopy, energy-saving technologies like smart windows and waste heat management, biomedical applications including therapy and imaging, and optical applications like two photon upconversion, enhanced luminesence, and infrared metasurfaces.

Size Dependence of Doping by a Vacancy Formation Reaction in Copper Sulfide Nanocrystals

Doping of nanocrystals (NCs) is a key, yet underexplored, approach for tuning of the electronic properties of semiconductors. An important route for doping of NCs is by vacancy formation. The size and concentration dependence of doping was studied in copper(I) sulfide (Cu₂ S) NCs through a redox reaction with iodine molecules (I₂ ), which formed vacancies accompanied by a localized surface plasmon response. X-ray spectroscopy and diffraction reveal transformation from Cu₂ S to Cu-depleted phases, along with CuI formation. Greater reaction efficiency was observed for larger NCs. This behavior is attributed to interplay of the vacancy formation energy, which decreases for smaller sized NCs, and the growth of CuI on the NC surface, which is favored on well-defined facets of larger NCs. This doping process allows tuning of the plasmonic properties of a semiconductor across a wide range of plasmonic frequencies by varying the size of NCs and the concentration of iodine. Controlled vacancy doping of NCs may be used to tune and tailor semiconductors for use in optoelectronic applications.